Граф коммитов

155 Коммитов

Автор SHA1 Сообщение Дата
Wu Fengguang 4cbec4c8b9 writeback: remove the internal 5% low bound on dirty_ratio
The dirty_ratio was silently limited in global_dirty_limits() to >= 5%.
This is not a user expected behavior.  And it's inconsistent with
calc_period_shift(), which uses the plain vm_dirty_ratio value.

Let's remove the internal bound.

At the same time, fix balance_dirty_pages() to work with the
dirty_thresh=0 case.  This allows applications to proceed when
dirty+writeback pages are all cleaned.

And ">" fits with the name "exceeded" better than ">=" does.  Neil thinks
it is an aesthetic improvement as well as a functional one :)

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Proposed-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Michael Rubin ea941f0e2a writeback: add nr_dirtied and nr_written to /proc/vmstat
To help developers and applications gain visibility into writeback
behaviour adding two entries to vm_stat_items and /proc/vmstat.  This will
allow us to track the "written" and "dirtied" counts.

   # grep nr_dirtied /proc/vmstat
   nr_dirtied 3747
   # grep nr_written /proc/vmstat
   nr_written 3618

Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:06 -07:00
Michael Rubin f629d1c9bd mm: add account_page_writeback()
To help developers and applications gain visibility into writeback
behaviour this patch adds two counters to /proc/vmstat.

  # grep nr_dirtied /proc/vmstat
  nr_dirtied 3747
  # grep nr_written /proc/vmstat
  nr_written 3618

These entries allow user apps to understand writeback behaviour over time
and learn how it is impacting their performance.  Currently there is no
way to inspect dirty and writeback speed over time.  It's not possible for
nr_dirty/nr_writeback.

These entries are necessary to give visibility into writeback behaviour.
We have /proc/diskstats which lets us understand the io in the block
layer.  We have blktrace for more in depth understanding.  We have
e2fsprogs and debugsfs to give insight into the file systems behaviour,
but we don't offer our users the ability understand what writeback is
doing.  There is no way to know how active it is over the whole system, if
it's falling behind or to quantify it's efforts.  With these values
exported users can easily see how much data applications are sending
through writeback and also at what rates writeback is processing this
data.  Comparing the rates of change between the two allow developers to
see when writeback is not able to keep up with incoming traffic and the
rate of dirty memory being sent to the IO back end.  This allows folks to
understand their io workloads and track kernel issues.  Non kernel
engineers at Google often use these counters to solve puzzling performance
problems.

Patch #4 adds a pernode vmstat file with nr_dirtied and nr_written

Patch #5 add writeback thresholds to /proc/vmstat

Currently these values are in debugfs. But they should be promoted to
/proc since they are useful for developers who are writing databases
and file servers and are not debugging the kernel.

The output is as below:

 # grep threshold /proc/vmstat
 nr_pages_dirty_threshold 409111
 nr_pages_dirty_background_threshold 818223

This patch:

This allows code outside of the mm core to safely manipulate page
writeback state and not worry about the other accounting.  Not using these
routines means that some code will lose track of the accounting and we get
bugs.

Modify nilfs2 to use interface.

Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:06 -07:00
Linus Torvalds 997396a73a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: fix get_ticket_handler() error handling
  ceph: don't BUG on ENOMEM during mds reconnect
  ceph: ceph_mdsc_build_path() returns an ERR_PTR
  ceph: Fix warnings
  ceph: ceph_get_inode() returns an ERR_PTR
  ceph: initialize fields on new dentry_infos
  ceph: maintain i_head_snapc when any caps are dirty, not just for data
  ceph: fix osd request lru adjustment when sending request
  ceph: don't improperly set dir complete when holding EXCL cap
  mm: exporting account_page_dirty
  ceph: direct requests in snapped namespace based on nonsnap parent
  ceph: queue cap snap writeback for realm children on snap update
  ceph: include dirty xattrs state in snapped caps
  ceph: fix xattr cap writeback
  ceph: fix multiple mds session shutdown
2010-08-28 14:07:20 -07:00
Dave Chinner 546a192422 writeback: write_cache_pages doesn't terminate at nr_to_write <= 0
I noticed XFS writeback in 2.6.36-rc1 was much slower than it should have
been. Enabling writeback tracing showed:

    flush-253:16-8516  [007] 1342952.351608: wbc_writepage: bdi 253:16: towrt=1024 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [007] 1342952.351654: wbc_writepage: bdi 253:16: towrt=1023 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [000] 1342952.369520: wbc_writepage: bdi 253:16: towrt=0 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [000] 1342952.369542: wbc_writepage: bdi 253:16: towrt=-1 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0
    flush-253:16-8516  [000] 1342952.369549: wbc_writepage: bdi 253:16: towrt=-2 skip=0 mode=0 kupd=0 bgrd=1 reclm=0 cyclic=1 more=0 older=0x0 start=0x0 end=0x0

Writeback is not terminating in background writeback if ->writepage is
returning with wbc->nr_to_write == 0, resulting in sub-optimal single page
writeback on XFS.

Fix the write_cache_pages loop to terminate correctly when this situation
occurs and so prevent this sub-optimal background writeback pattern. This
improves sustained sequential buffered write performance from around
250MB/s to 750MB/s for a 100GB file on an XFS filesystem on my 8p test VM.

Cc:<stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-08-24 11:44:34 +10:00
Michael Rubin 679ceace84 mm: exporting account_page_dirty
This allows code outside of the mm core to safely manipulate page state
and not worry about the other accounting. Not using these routines means
that some code will lose track of the accounting and we get bugs. This
has happened once already.

Signed-off-by: Michael Rubin <mrubin@google.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:51 -07:00
Jan Kara d5ed3a4af7 lib/radix-tree.c: fix overflow in radix_tree_range_tag_if_tagged()
When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows
index and tree traversal code goes astray reading memory until it hits
unreadable memory.  Check for overflow and exit in that case.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-20 09:34:55 -07:00
Randy Dunlap 03ab450f03 mm/page-writeback: fix non-kernel-doc function comments
Remove leading /** from non-kernel-doc function comments to prevent
kernel-doc warnings.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-14 16:20:59 -07:00
Wu Fengguang 1babe18385 writeback: add comment to the dirty limit functions
Document global_dirty_limits() and bdi_dirty_limit().

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:30 -07:00
Wu Fengguang 16c4042f08 writeback: avoid unnecessary calculation of bdi dirty thresholds
Split get_dirty_limits() into global_dirty_limits()+bdi_dirty_limit(), so
that the latter can be avoided when under global dirty background
threshold (which is the normal state for most systems).

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:29 -07:00
Wu Fengguang e50e37201a writeback: balance_dirty_pages(): reduce calls to global_page_state
Reducing the number of times balance_dirty_pages calls global_page_state
reduces the cache references and so improves write performance on a
variety of workloads.

'perf stats' of simple fio write tests shows the reduction in cache
access.  Where the test is fio 'write,mmap,600Mb,pre_read' on AMD AthlonX2
with 3Gb memory (dirty_threshold approx 600 Mb) running each test 10
times, dropping the fasted & slowest values then taking the average &
standard deviation

		average (s.d.) in millions (10^6)
2.6.31-rc8	648.6 (14.6)
+patch		620.1 (16.5)

Achieving this reduction is by dropping clip_bdi_dirty_limit as it rereads
the counters to apply the dirty_threshold and moving this check up into
balance_dirty_pages where it has already read the counters.

Also by rearrange the for loop to only contain one copy of the limit tests
allows the pdflush test after the loop to use the local copies of the
counters rather than rereading them.

In the common case with no throttling it now calls global_page_state 5
fewer times and bdi_stat 2 fewer.

Fengguang:

This patch slightly changes behavior by replacing clip_bdi_dirty_limit()
with the explicit check (nr_reclaimable + nr_writeback >= dirty_thresh) to
avoid exceeding the dirty limit.  Since the bdi dirty limit is mostly
accurate we don't need to do routinely clip.  A simple dirty limit check
would be enough.

The check is necessary because, in principle we should throttle everything
calling balance_dirty_pages() when we're over the total limit, as said by
Peter.

We now set and clear dirty_exceeded not only based on bdi dirty limits,
but also on the global dirty limit.  The global limit check is added in
place of clip_bdi_dirty_limit() for safety and not intended as a behavior
change.  The bdi limits should be tight enough to keep all dirty pages
under the global limit at most time; occasional small exceeding should be
OK though.  The change makes the logic more obvious: the global limit is
the ultimate goal and shall be always imposed.

We may now start background writeback work based on outdated conditions.
That's safe because the bdi flush thread will (and have to) double check
the states.  It reduces overall overheads because the test based on old
states still have good chance to be right.

[akpm@linux-foundation.org] fix uninitialized dirty_exceeded
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:29 -07:00
Randy Dunlap 3c111a071d mm: fix fatal kernel-doc error
Fix a fatal kernel-doc error due to a #define coming between a function's
kernel-doc notation and the function signature.  (kernel-doc cannot handle
this)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:29 -07:00
Linus Torvalds 2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
Jan Kara f446daaea9 mm: implement writeback livelock avoidance using page tagging
We try to avoid livelocks of writeback when some steadily creates dirty
pages in a mapping we are writing out.  For memory-cleaning writeback,
using nr_to_write works reasonably well but we cannot really use it for
data integrity writeback.  This patch tries to solve the problem.

The idea is simple: Tag all pages that should be written back with a
special tag (TOWRITE) in the radix tree.  This can be done rather quickly
and thus livelocks should not happen in practice.  Then we start doing the
hard work of locking pages and sending them to disk only for those pages
that have TOWRITE tag set.

Note: Adding new radix tree tag grows radix tree node from 288 to 296
bytes for 32-bit archs and from 552 to 560 bytes for 64-bit archs.
However, the number of slab/slub items per page remains the same (13 and 7
respectively).

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:59 -07:00
Dave Chinner 9e094383b6 writeback: Add tracing to write_cache_pages
Add a trace event to the ->writepage loop in write_cache_pages to give
visibility into how the ->writepage call is changing variables within the
writeback control structure. Of most interest is how wbc->nr_to_write changes
from call to call, especially with filesystems that write multiple pages
in ->writepage.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:24:26 +02:00
Dave Chinner 028c2dd184 writeback: Add tracing to balance_dirty_pages
Tracing high level background writeback events is good, but it doesn't
give the entire picture. Add visibility into write throttling to catch IO
dispatched by foreground throttling of processing dirtying lots of pages.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:24:25 +02:00
Christoph Hellwig 9c3a8ee8a1 writeback: remove writeback_inodes_wbc
This was just an odd wrapper around writeback_inodes_wb.  Removing this
also allows to get rid of the bdi member of struct writeback_control
which was rather out of place there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-06 08:54:03 +02:00
Christoph Hellwig c5444198ca writeback: simplify and split bdi_start_writeback
bdi_start_writeback now never gets a superblock passed, so we can just remove
that case.  And to further untangle the code and flatten the call stack
split it into two trivial helpers for it's two callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-11 12:58:08 +02:00
Dave Chinner d87815cb20 writeback: limit write_cache_pages integrity scanning to current EOF
sync can currently take a really long time if a concurrent writer is
extending a file. The problem is that the dirty pages on the address
space grow in the same direction as write_cache_pages scans, so if
the writer keeps ahead of writeback, the writeback will not
terminate until the writer stops adding dirty pages.

For a data integrity sync, we only need to write the pages dirty at
the time we start the writeback, so we can stop scanning once we get
to the page that was at the end of the file at the time the scan
started.

This will prevent operations like copying a large file preventing
sync from completing as it will not write back pages that were
dirtied after the sync was started. This does not impact the
existing integrity guarantees, as any dirty page (old or new)
within the EOF range at the start of the scan will still be
captured.

This patch will not prevent sync from blocking on large writes into
holes. That requires more complex intervention while this patch only
addresses the common append-case of this sync holdoff.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08 18:12:44 -07:00
Dave Chinner 0b5649278e writeback: pay attention to wbc->nr_to_write in write_cache_pages
If a filesystem writes more than one page in ->writepage, write_cache_pages
fails to notice this and continues to attempt writeback when wbc->nr_to_write
has gone negative - this trace was captured from XFS:

    wbc_writeback_start: towrt=1024
    wbc_writepage: towrt=1024
    wbc_writepage: towrt=0
    wbc_writepage: towrt=-1
    wbc_writepage: towrt=-5
    wbc_writepage: towrt=-21
    wbc_writepage: towrt=-85

This has adverse effects on filesystem writeback behaviour. write_cache_pages()
needs to terminate after a certain number of pages are written, not after a
certain number of calls to ->writepage are made.  This is a regression
introduced by 17bc6c30cf ("vfs: Add
no_nrwrite_index_update writeback control flag"), but cannot be reverted
directly due to subsequent bug fixes that have gone in on top of it.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-06-08 18:12:44 -07:00
Jens Axboe 0e3c9a2284 Revert "writeback: fix WB_SYNC_NONE writeback from umount"
This reverts commit e913fc825d.

We are investigating a hang associated with the WB_SYNC_NONE changes,
so revert them for now.

Conflicts:

	fs/fs-writeback.c
	mm/page-writeback.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-01 11:08:43 +02:00
Jens Axboe df96e96f76 writeback: fix mixed up arguments to bdi_start_writeback()
The laptop mode timer had the nr_pages and sb_locked arguments
mixed up.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:54 +02:00
Jens Axboe c2c4986edd writeback: fix problem with !CONFIG_BLOCK compilation
When CONFIG_BLOCK isn't enabled:

mm/page-writeback.c: In function 'laptop_mode_timer_fn':
mm/page-writeback.c:708: error: dereferencing pointer to incomplete type
mm/page-writeback.c:709: error: dereferencing pointer to incomplete type

Fix this by essentially eliminating the laptop sync handlers when
CONFIG_BLOCK isn't set, as most are only used from the block layer code.
The exception is laptop_sync_completion() which is used from sys_sync(),
make that an empty declaration in that case.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:01:03 +02:00
Jens Axboe 6423104b6a writeback: fixups for !dirty_writeback_centisecs
Commit 69b62d01 fixed up most of the places where we would enter
busy schedule() spins when disabling the periodic background
writeback. This fixes up the sb timer so that it doesn't get
hammered on with the delay disabled, and ensures that it gets
rearmed if needed when /proc/sys/vm/dirty_writeback_centisecs
gets modified.

bdi_forker_task() also needs to check for !dirty_writeback_centisecs
and use schedule() appropriately, fix that up too.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 20:00:35 +02:00
Jens Axboe e913fc825d writeback: fix WB_SYNC_NONE writeback from umount
When umount calls sync_filesystem(), we first do a WB_SYNC_NONE
writeback to kick off writeback of pending dirty inodes, then follow
that up with a WB_SYNC_ALL to wait for it. Since umount already holds
the sb s_umount mutex, WB_SYNC_NONE ends up doing nothing and all
writeback happens as WB_SYNC_ALL. This can greatly slow down umount,
since WB_SYNC_ALL writeback is a data integrity operation and thus
a bigger hammer than simple WB_SYNC_NONE. For barrier aware file systems
it's a lot slower.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-17 12:55:07 +02:00
Matthew Garrett 31373d09da laptop-mode: Make flushes per-device
One of the features of laptop-mode is that it forces a writeout of dirty
pages if something else triggers a physical read or write from a device.
The current implementation flushes pages on all devices, rather than only
the one that triggered the flush. This patch alters the behaviour so that
only the recently accessed block device is flushed, preventing other
disks being spun up for no terribly good reason.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-06 14:25:14 +02:00
Wu Fengguang 0d99519efe writeback: remove unused nonblocking and congestion checks
- no one is calling wb_writeback and write_cache_pages with
  wbc.nonblocking=1 any more
- lumpy pageout will want to do nonblocking writeback without the
  congestion wait

So remove the congestion checks as suggested by Chris.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Alex Elder <aelder@sgi.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-03 13:54:25 +01:00
Wu Fengguang d25105e891 writeback: account IO throttling wait as iowait
It makes sense to do IOWAIT when someone is blocked
due to IO throttle, as suggested by Kame and Peter.

There is an old comment for not doing IOWAIT on throttle,
however it has been mismatching the code for a long time.

If we stop accounting IOWAIT for 2.6.32, it could be an
undesirable behavior change. So restore the io_schedule.

CC: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-09 12:40:42 +02:00
Jens Axboe a72bfd4dea writeback: pass in super_block to bdi_start_writeback()
Sometimes we only want to write pages from a specific super_block,
so allow that to be passed in.

This fixes a problem with commit 56a131dcf7
causing writeback on all super_blocks on a bdi, where we only really
want to sync a specific sb from writeback_inodes_sb().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-26 00:10:40 +02:00
Linus Torvalds 6d7f18f6ea Merge branch 'writeback' of git://git.kernel.dk/linux-2.6-block
* 'writeback' of git://git.kernel.dk/linux-2.6-block:
  writeback: writeback_inodes_sb() should use bdi_start_writeback()
  writeback: don't delay inodes redirtied by a fast dirtier
  writeback: make the super_block pinning more efficient
  writeback: don't resort for a single super_block in move_expired_inodes()
  writeback: move inodes from one super_block together
  writeback: get rid to incorrect references to pdflush in comments
  writeback: improve readability of the wb_writeback() continue/break logic
  writeback: cleanup writeback_single_inode()
  writeback: kupdate writeback shall not stop when more io is possible
  writeback: stop background writeback when below background threshold
  writeback: balance_dirty_pages() shall write more than dirtied pages
  fs: Fix busyloop in wb_writeback()
2009-09-25 09:27:30 -07:00
Jens Axboe 5b0830cb90 writeback: get rid to incorrect references to pdflush in comments
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-25 18:08:25 +02:00
Wu Fengguang d3ddec7635 writeback: stop background writeback when below background threshold
Treat bdi_start_writeback(0) as a special request to do background write,
and stop such work when we are below the background dirty threshold.

Also simplify the (nr_pages <= 0) checks. Since we already pass in
nr_pages=LONG_MAX for WB_SYNC_ALL and background writes, we don't
need to worry about it being decreased to zero.

Reported-by: Richard Kennedy <richard@rsk.demon.co.uk>
CC: Jan Kara <jack@suse.cz>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-25 18:08:24 +02:00
Wu Fengguang 3a2e9a5a2a writeback: balance_dirty_pages() shall write more than dirtied pages
Some filesystem may choose to write much more than ratelimit_pages
before calling balance_dirty_pages_ratelimited_nr(). So it is safer to
determine number to write based on real number of dirtied pages.

Otherwise it is possible that
  loop {
    btrfs_file_write():     dirty 1024 pages
    balance_dirty_pages():  write up to 48 pages (= ratelimit_pages * 1.5)
  }
in which the writeback rate cannot keep up with dirty rate, and the
dirty pages go all the way beyond dirty_thresh.

The increased write_chunk may make the dirtier more bumpy.
So filesystems shall be take care not to dirty too much at
a time (eg. > 4MB) without checking the ratelimit.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-25 18:08:24 +02:00
Linus Torvalds db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
Alexey Dobriyan 8d65af789f sysctl: remove "struct file *" argument of ->proc_handler
It's unused.

It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.

It _was_ used in two places at arch/frv for some reason.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:04 -07:00
Wu Fengguang adea02a1be mm: count only reclaimable lru pages
global_lru_pages() / zone_lru_pages() can be used in two ways:
- to estimate max reclaimable pages in determine_dirtyable_memory()
- to calculate the slab scan ratio

When swap is full or not present, the anon lru lists are not reclaimable
and also won't be scanned.  So the anon pages shall not be counted in both
usage scenarios.  Also rename to _reclaimable_pages: now they are counting
the possibly reclaimable lru pages.

It can greatly (and correctly) increase the slab scan rate under high
memory pressure (when most file pages have been reclaimed and swap is
full/absent), thus reduce false OOM kills.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "Li, Ming Chun" <macli@brc.ubc.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:30 -07:00
Jens Axboe 87c6a9b253 writeback: make balance_dirty_pages() gradually back more off
Currently it just sleeps for a very short time, just 1 jiffy. If
we keep looping in there, continually delay for a little longer
of up to 100msec in total. That was the old limit for congestion
wait.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-21 15:40:33 +02:00
Jens Axboe 3542a5c0de writeback: don't use schedule_timeout() without setting runstate
Just use schedule_timeout_interruptible(), saves a call to
set_current_state().

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-21 15:40:33 +02:00
Jens Axboe b6e51316da writeback: separate starting of sync vs opportunistic writeback
bdi_start_writeback() is currently split into two paths, one for
WB_SYNC_NONE and one for WB_SYNC_ALL. Add bdi_sync_writeback()
for WB_SYNC_ALL writeback and let bdi_start_writeback() handle
only WB_SYNC_NONE.

Push down the writeback_control allocation and only accept the
parameters that make sense for each function. This cleans up
the API considerably.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:18:52 +02:00
Jens Axboe cfc4ba5365 writeback: use RCU to protect bdi_list
Now that bdi_writeback_all() no longer handles integrity writeback,
it doesn't have to block anymore. This means that we can switch
bdi_list reader side protection to RCU.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:18:51 +02:00
Jens Axboe 1fe06ad892 writeback: get rid of wbc->for_writepages
It's only set, it's never checked. Kill it.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:16:18 +02:00
Wu Fengguang 6746aff74d HWPOISON: shmem: call set_page_dirty() with locked page
The dirtying of page and set_page_dirty() can be moved into the page lock.

- In shmem_write_end(), the page was dirtied while the page lock was held,
  but it's being marked dirty just after dropping the page lock.
- In shmem_symlink(), both dirtying and marking can be moved into page lock.

It's valuable for the hwpoison code to know whether one bad page can be dropped
without losing data. It mainly judges by testing the PG_dirty bit after taking
the page lock. So it becomes important that the dirtying of page and the
marking of dirtiness are both done inside the page lock. Which is a common
practice, but sadly not a rule.

The noticeable exceptions are
- mapped pages
- pages with buffer_heads
The above pages could go dirty at any time. Fortunately the hwpoison will
unmap the page and release the buffer_heads beforehand anyway.

Many other types of pages (eg. metadata pages) can also be dirtied at will by
their owners, the hwpoison code cannot do meaningful things to them anyway.
Only the dirtiness of pagecache pages owned by regular files are interested.

v2: AK: Add comment about set_page_dirty rules (suggested by Peter Zijlstra)

Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-09-16 11:50:14 +02:00
Linus Torvalds ada3fa1505 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15 09:39:44 -07:00
Jens Axboe 03ba3782e8 writeback: switch to per-bdi threads for flushing data
This gets rid of pdflush for bdi writeout and kupdated style cleaning.
pdflush writeout suffers from lack of locality and also requires more
threads to handle the same workload, since it has to work in a
non-blocking fashion against each queue. This also introduces lumpy
behaviour and potential request starvation, since pdflush can be starved
for queue access if others are accessing it. A sample ffsb workload that
does random writes to files is about 8% faster here on a simple SATA drive
during the benchmark phase. File layout also seems a LOT more smooth in
vmstat:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 0  1      0 608848   2652 375372    0    0     0 71024  604    24  1 10 48 42
 0  1      0 549644   2712 433736    0    0     0 60692  505    27  1  8 48 44
 1  0      0 476928   2784 505192    0    0     4 29540  553    24  0  9 53 37
 0  1      0 457972   2808 524008    0    0     0 54876  331    16  0  4 38 58
 0  1      0 366128   2928 614284    0    0     4 92168  710    58  0 13 53 34
 0  1      0 295092   3000 684140    0    0     0 62924  572    23  0  9 53 37
 0  1      0 236592   3064 741704    0    0     4 58256  523    17  0  8 48 44
 0  1      0 165608   3132 811464    0    0     0 57460  560    21  0  8 54 38
 0  1      0 102952   3200 873164    0    0     4 74748  540    29  1 10 48 41
 0  1      0  48604   3252 926472    0    0     0 53248  469    29  0  7 47 45

where vanilla tends to fluctuate a lot in the creation phase:

 r  b   swpd   free   buff  cache   si   so    bi    bo   in    cs us sy id wa
 1  1      0 678716   5792 303380    0    0     0 74064  565    50  1 11 52 36
 1  0      0 662488   5864 319396    0    0     4   352  302   329  0  2 47 51
 0  1      0 599312   5924 381468    0    0     0 78164  516    55  0  9 51 40
 0  1      0 519952   6008 459516    0    0     4 78156  622    56  1 11 52 37
 1  1      0 436640   6092 541632    0    0     0 82244  622    54  0 11 48 41
 0  1      0 436640   6092 541660    0    0     0     8  152    39  0  0 51 49
 0  1      0 332224   6200 644252    0    0     4 102800  728    46  1 13 49 36
 1  0      0 274492   6260 701056    0    0     4 12328  459    49  0  7 50 43
 0  1      0 211220   6324 763356    0    0     0 106940  515    37  1 10 51 39
 1  0      0 160412   6376 813468    0    0     0  8224  415    43  0  6 49 45
 1  1      0  85980   6452 886556    0    0     4 113516  575    39  1 11 54 34
 0  2      0  85968   6452 886620    0    0     0  1640  158   211  0  0 46 54

A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A
SSD based writeback test on XFS performs over 20% better as well, with
the throughput being very stable around 1GB/sec, where pdflush only
manages 750MB/sec and fluctuates wildly while doing so. Random buffered
writes to many files behave a lot better as well, as does random mmap'ed
writes.

A separate thread is added to sync the super blocks. In the long term,
adding sync_supers_bdi() functionality could get rid of this thread again.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 09:20:25 +02:00
Jens Axboe 66f3b8e2e1 writeback: move dirty inodes from super_block to backing_dev_info
This is a first step at introducing per-bdi flusher threads. We should
have no change in behaviour, although sb_has_dirty_inodes() is now
ridiculously expensive, as there's no easy way to answer that question.
Not a huge problem, since it'll be deleted in subsequent patches.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 09:20:25 +02:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Jens Axboe 8aa7e847d8 Fix congestion_wait() sync/async vs read/write confusion
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
Tejun Heo c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Richard Kennedy d7831a0bdf mm: prevent balance_dirty_pages() from doing too much work
balance_dirty_pages can overreact and move all of the dirty pages to
writeback unnecessarily.

balance_dirty_pages makes its decision to throttle based on the number of
dirty plus writeback pages that are over the calculated limit,so it will
continue to move pages even when there are plenty of pages in writeback
and less than the threshold still dirty.

This allows it to overshoot its limits and move all the dirty pages to
writeback while waiting for the drives to catch up and empty the writeback
list.

A simple fio test easily demonstrates this problem.

fio --name=f1 --directory=/disk1 --size=2G -rw=write --name=f2 --directory=/disk2 --size=1G --rw=write --startdelay=10

This is the simplest fix I could find, but I'm not entirely sure that it
alone will be enough for all cases.  But it certainly is an improvement on
my desktop machine writing to 2 disks.

Do we need something more for machines with large arrays where
bdi_threshold * number_of_drives is greater than the dirty_ratio ?

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:56:01 -07:00
Tejun Heo 245b2e70ea percpu: clean up percpu variable definitions
Percpu variable definition is about to be updated such that all percpu
symbols including the static ones must be unique.  Update percpu
variable definitions accordingly.

* as,cfq: rename ioc_count uniquely

* cpufreq: rename cpu_dbs_info uniquely

* xen: move nesting_count out of xen_evtchn_do_upcall() and rename it

* mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and
  rename it

* ipv4,6: rename cookie_scratch uniquely

* x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to
  pmc_irq_entry and nmi_entry to pmc_nmi_entry

* perf_counter: rename disable_count to perf_disable_count

* ftrace: rename test_event_disable to ftrace_test_event_disable

* kmemleak: rename test_pointer to kmemleak_test_pointer

* mce: rename next_interval to mce_next_interval

[ Impact: percpu usage cleanups, no duplicate static percpu var names ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
2009-06-24 15:13:48 +09:00