Граф коммитов

1329 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 399eb9b6cb ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
2019-09-16 15:52:38 -07:00
Linus Torvalds 2b97c39514 ARM: SoC platform updates for v5.4
The main change this time around is a cleanup of some of the oldest
 platforms based on the XScale and ARM9 CPU cores, which are between 10
 and 20 years old.
 
 The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
 IOP33x/IOP13xx platforms are removed after we determined that nobody is
 using them any more.
 
 The TI Davinci and NXP LPC32xx platforms on the other hand are still in
 active use and are converted to the ARCH_MULTIPLATFORM build, meaning
 that we can compile a kernel that works on these along with most other
 ARMv5 platforms. Changes toward that goal are also merged for IOP32x,
 but additional work is needed to complete this. Patches for the
 remaining ARMv5 platforms have started but need more work and some
 testing.
 
 Support for the new ASpeed AST2600 gets added, this is based on the
 Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
 ARMv6 chips in the same family.
 
 Other changes include a cleanup of the ST-Ericsson ux500 platform
 and the move of the TI Davinci platform to a new clocksource driver.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6RZAAoJEJpsee/mABjZDO0QAKGkhoEdUmrar0Yf7/ibTrLK
 0naWvQtPEm6dv+u1zNfe2IWchVRbBVm+YSLbyaAZwJQknV5gdxgd/UyQrSG9yywg
 xDEUdnj03AksYreWbr1tfcA6kQQJEeqZeysNej0v7MAd6MFz5O4M4CgYfAnCLCc4
 5rzSqbtFgv4uNMnMTJGKk8anFWNYLbewoBGVcGIEQ/KQlf1+NrlqBWk7CgvencaF
 VLqpK0mllhKxAOJHGz6Q/XXiJnj0u56X9GvfcJoaxDWVrAnC6ii29NOHKeXhxS5W
 /EmhIEuqCRoGLAMYmml+NbCv43Z1L7neDJwg6sf9cVqNrB9L1Ldlgpr/uoj++Z+l
 wdZ297Ogs4mKYx5CCdK4X1TaFOH3s+/awFr1uEP70p+QsPDMrCTuLSjgeQziylgO
 kBGIGkqG4l48V9psQy/9SaalgGSB8w6Ta/ms1+rWc99Qj3ExDFCAMIl4uzOxjxT1
 9MZbvhc3ulLT4BBXNGhvNaPJxYGk+ggV/ObsqF9+GkxLcVPR8L1tPIzZMB5dB1YR
 0YcwyK2jlZGKIwMjLYDT+axGGPh9G+LV6INjRbW5BGJHgNZF844Bxw/eFYushLAu
 KHrbpm3ImzJw9eHlgIRtFRTy8ZKPuvv7fGg3zzKSHT4ZmC3tEM68PnQGuMEvVX8Q
 +Oa6OiDb0pkV1zsACSZn
 =u+ew
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "The main change this time around is a cleanup of some of the oldest
  platforms based on the XScale and ARM9 CPU cores, which are between 10
  and 20 years old.

  The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
  IOP33x/IOP13xx platforms are removed after we determined that nobody
  is using them any more.

  The TI Davinci and NXP LPC32xx platforms on the other hand are still
  in active use and are converted to the ARCH_MULTIPLATFORM build,
  meaning that we can compile a kernel that works on these along with
  most other ARMv5 platforms. Changes toward that goal are also merged
  for IOP32x, but additional work is needed to complete this. Patches
  for the remaining ARMv5 platforms have started but need more work and
  some testing.

  Support for the new ASpeed AST2600 gets added, this is based on the
  Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
  ARMv6 chips in the same family.

  Other changes include a cleanup of the ST-Ericsson ux500 platform and
  the move of the TI Davinci platform to a new clocksource driver"

[ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being
  buildable on other platforms through COMPILE_TEST, but that causes new
  warnings that I most definitely do not want to see during the merge
  window as that could hide other issues.

  So the COMPILE_TEST option got disabled for them again   - Linus ]

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build
  ARM: davinci: support multiplatform build for ARM v5
  arm64: exynos: Enable exynos-chipid driver
  ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  ARM: davinci: dm646x: Fix a typo in the comment
  ARM: davinci: dm646x: switch to using the clocksource driver
  ARM: davinci: dm644x: switch to using the clocksource driver
  ARM: aspeed: Enable SMP boot
  ARM: aspeed: Add ASPEED AST2600 architecture
  ARM: aspeed: Select timer in each SoC
  dt-bindings: arm: cpus: Add ASPEED SMP
  ARM: imx: stop adjusting ar8031 phy tx delay
  mailmap: map old company name to new one @microchip.com
  MAINTAINERS: at91: remove the TC entry
  MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry
  ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
  MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
  ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
  ARM: debug-ll: Add support for r7s9210
  ...
2019-09-16 15:48:14 -07:00
Arnd Bergmann 3dc8dcb02f Qualcomm ARM Based Driver Updates for v5.4
* Add AOSS QMP support
 * Various fixups for Qualcomm SCM
 * Add socinfo driver
 * Add SoC serial number attribute and associated APIs
 * Add SM8150 and SC7180 support in Qualcomm SCM
 * Fixup max processor count in SMEM
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdZpm4AAoJEFKiBbHx2RXV6UEP/1S0B3yKF+/HBylghMBgYI21
 P0qWH0cGSYioCLYEPn1qZjftBGSg9K3e31IoFk/mSDy0rt4wbg53ribkL6tE7M+c
 ZLZfOs06stGLg6Nf/oLz2SbN2bQsIZBGJoVgp58N/z4Qymspvf7Vg4y9VCy/dzqe
 R5bQZhYNWJNzv2q2vju06ACCkQgkRVfIuQSI+69t3bbeWJrHatVrPRHP8Xi8kaTh
 /nI7hkO9ouMC6Uda8/aeGoo5V/xaC+rankp9ttdFeHNVXMgk6c3v5rD4fSYw+CVY
 Icw7MCKGF1QPjHkLofTZsqpADHabUwu/NmDV1D5c1A/qu0gBocPSI1o1XbChlceS
 E/3oO9DJQoNxJOKPxMzZwtVRAeGGrk7/PflkBY+/55XNXO4zasD0Kbi3/ReUokBJ
 G5zyN/Lm/gsSfsyiJBFMN02mxbKixlSd/XDp/gClLf7f1QXV+IFyeiDkyMxWH00b
 gM4c8hJalWJ2jKi9JDA7GVJD9N+8Q76+Z4HmGiyJJZXtLrVB+ehQFrSOxt97qvBE
 4KeZUTfSON++8LpWeP3zVSB1Kox6+cCGQEK0VmwhEHOjE4gg8iV/YIKznwx7clTn
 XepzT4K49xO5NQ9h9g2rXNdzvuXvVrKA/CuCtv6/24aSifHHpFroCIewcKZa++/m
 Pv3LzPbX4a8d5Hq/qP0o
 =MsUS
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm ARM Based Driver Updates for v5.4

* Add AOSS QMP support
* Various fixups for Qualcomm SCM
* Add socinfo driver
* Add SoC serial number attribute and associated APIs
* Add SM8150 and SC7180 support in Qualcomm SCM
* Fixup max processor count in SMEM

* tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: aoss: Add AOSS QMP support
  dt-bindings: soc: qcom: aoss: Add SM8150 and SC7180 support
  dt-bindings: firmware: scm: Add SM8150 and SC7180 support
  dt-bindings: firmware: scm: re-order compatible list
  soc: qcom: smem: Update max processor count
  soc: qcom: socinfo: Annotate switch cases with fall through
  soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.
  soc: qcom: socinfo: Expose image information
  soc: qcom: socinfo: Expose custom attributes
  soc: qcom: Add socinfo driver
  base: soc: Export soc_device_register/unregister APIs
  base: soc: Add serial_number attribute to soc
  firmware: qcom_scm: Cleanup code in qcom_scm_assign_mem()
  firmware: qcom_scm: Fix some typos in docs and printks
  firmware: qcom_scm: Use proper types for dma mappings
2019-09-12 13:46:20 +02:00
Lee Jones 8928e917ae soc: qcom: geni: Provide parameter error checking
When booting with ACPI, the Geni Serial Engine is not set as the I2C/SPI
parent and thus, the wrapper (parent device) is unassigned.  This causes
the kernel to crash with a null dereference error.

Link: https://lore.kernel.org/r/20190905082555.15020-1-lee.jones@linaro.org
Fixes: 8bc529b253 ("soc: qcom: geni: Add support for ACPI")
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-06 11:08:08 +02:00
Arnd Bergmann b8580b2831 Samsung soc drivers changes for v5.4, part 2
Fixes and cleanups for recently introduced Exynos chipid driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl1v9IkQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1xiJD/4zGmpm4PgXLqcU3WAd/ltCVM3BfAWErJys
 ERt8poyXsSFBfBzKlHOajljlmHLzRNS4PxMCUzoJXJnyWxX8GGTkyBPnOYUGkNpB
 ukmjJlIBtP89HfnpmMBaBGyJ19X5+vWxF0nUWyIc+c958jZS4dYCxpHpKFgI5Ie5
 sEiqSIY0WzjOothIPcGfWsPpu/t8QLZ7Z1baSoKCLTa7qN+Ai5R/niXNFCl6F3mv
 swaRyMofT5cp06jaWLdwYA/fjQZxT1tReZxhrAJqJkBLuEGi/2RRW8vI6fohyMH8
 ZDuxNdZVY9iW8iSFyOSez42MPjEeQjSU71qtYzjNhGaMWO06teezZIEFk11PnoGX
 cAJw4Ql2N9EgNNRbEN2TCxkRqTrGe9IhmQeOPuWKP2RRXlLxbRi/Q9lSoiU1Kww8
 dWg63YEZsV0XjhJF4iA2Rem6Xyvc/Cp8W07Cd9/uxkbPbEu5mIEypeYbnSnetqAZ
 UnEtPMBj4PpgWZDnyAjLK8Qt4v1G7C8LahySbAmi0jD7N+9B8DQ20E2fiMHY8CSr
 pYxoRwRmsc/C94U6mQlLaXiC5YiBdaHtFPvCsGZwOu6tD7p9M3ej05j3Db9OQlIa
 xlzUGdXm/9GAJls2d21jDevhETWp8eMao5tt2JrYRBgRPPgicCr0lunsnDMyz64r
 8UsMERCdkQ==
 =p4js
 -----END PGP SIGNATURE-----

Merge tag 'samsung-drivers-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers

Samsung soc drivers changes for v5.4, part 2

Fixes and cleanups for recently introduced Exynos chipid driver.

* tag 'samsung-drivers-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: chipid: Select missing dependency for EXYNOS_CHIPID
  soc: samsung: chipid: Remove the regmap lookup error log
  soc: samsung: chipid: Fix memory leak in error path

Link: https://lore.kernel.org/r/20190904175002.10487-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 22:32:30 +02:00
Lokesh Vutla de8a618f30 soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
TISCI protocol supports for enabling the device either with exclusive
permissions for the requesting host or with sharing across the hosts.
There are certain devices which are exclusive to Linux context and
there are certain devices that are shared across different host contexts.
So add support for getting this information from DT by increasing
the power-domain cells to 2.

For keeping the DT backward compatibility intact, defaulting the
device permissions to set the exclusive flag set. In this case the
power-domain-cells is 1.

Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 20:44:35 +02:00
Arnd Bergmann bff00fdf03 i.MX drivers update for 5.4:
- A series from Anson Huang to add UID support for i.MX8 SoC and SCU
    drivers.
  - A series from Daniel Baluta to add DSP IPC driver for communication
    between host AP (Linux) and the firmware running on DSP embedded in
    i.MX8 SoCs.
  - A small fix for GPCv2 error code printing.
  - Switch from module_platform_driver_probe() to module_platform_driver()
    for imx-weim driver, as we need the driver to probe again when device
    is present later.
  - Add optional burst clock mode support for imx-weim driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdYoCEAAoJEFBXWFqHsHzOkDgH/jWNgp3QR3omPQGX80oM6/ga
 3x78GDJyQfzZKWyOJbWz12tzXWlD1fmGIZy7SeuvXlYUbNnE1WU6ARFGDoBpjbew
 DOYoPT9x7eJemSdnEE43g2vtspEzb6Afvb7dr78OPaik24eY0dFx90U0tzptmuVY
 gXxkAHo2ez6txXTu5Id9Z5Deitukb8NoK/9yyzTeD0oYn2hCooAp5fAl1rKgfLnf
 MpG29TCK8dxr/j7tzsbt2nutJJYy1Ybh/0WpOMXnBwdAz20JT7MU87DMil0//Q02
 0Es/P2xH7K4r3ca9mupDtXZps2DbnmYJorvxpfHuMXcyq0uxGhl1/zyhTv+LW4c=
 =5mGq
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.4:
 - A series from Anson Huang to add UID support for i.MX8 SoC and SCU
   drivers.
 - A series from Daniel Baluta to add DSP IPC driver for communication
   between host AP (Linux) and the firmware running on DSP embedded in
   i.MX8 SoCs.
 - A small fix for GPCv2 error code printing.
 - Switch from module_platform_driver_probe() to module_platform_driver()
   for imx-weim driver, as we need the driver to probe again when device
   is present later.
 - Add optional burst clock mode support for imx-weim driver.

* tag 'imx-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: gpcv2: Print the correct error code
  bus: imx-weim: use module_platform_driver()
  firmware: imx: Add DSP IPC protocol interface
  soc: imx-scu: Add SoC UID(unique identifier) support
  bus: imx-weim: optionally enable burst clock mode
  firmware: imx: scu-pd: Add IRQSTR_DSP PD range
  firmware: imx: scu-pd: Add mu13 b side PD range
  firmware: imx: scu-pd: Rename mu PD range to mu_a
  soc: imx8: Add i.MX8MM UID(unique identifier) support
  soc: imx8: Add i.MX8MQ UID(unique identifier) support

Link: https://lore.kernel.org/r/20190825153237.28829-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:44:04 +02:00
Arnd Bergmann 87288375bb soc: amlogic: updates for v5.4 (round 2)
- add power domain controller
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl1oWskACgkQWTcYmtP7
 xmV37Q//d2oS1HQwhD9KaXztl75Ea10UY/k+Um9WAaVRifZLueYZWzhdqs/9r5pD
 AK9saIoVALBMJkcBZfCQS5/Z+R5B8WKOUeO0QYbB4WlX3VjRllADHLyxHYH2YbMa
 gIHONWnSPtiEqbjDKTM848FNWlUIgeAt0p9kble+Eet3gZL2B/EtmqnXMhtg5wbg
 ONOEYaLpVhFCdk1nibK49rwDwOzlhoVJOMLIdyw6b/mc0ekcIMgqR0HibJ8cjhO8
 zEuOptlmsh8g1JSGI8UU2OnC9Dm7j51k+hGKGKyotdplfc+8Gar/tzWcsLzMenjl
 0RuvoJoHgh5tEqiTKmrBxtXr0F5SrK83Ku0VT72wm74ipLs80PIZf3Zu73ZVJzUX
 qRFnW7JuFqbiWdSWBP06vtrZ/9hTart/XmtfWbZMe4x3ROP/cSAxPSXhB8iK5cPe
 R0//zxhrcEo5drRAqQgAqMkEKYTFW6HmNPVHZyJzfvpZovUICXnXn6nf2wsyGVXG
 D3XdbqhS9ev5VZEpMgyMnwHcN+Y8/dNHafoRufKKzkbOFAPmmMRLLRb4xcdCuUMF
 FOMx7Su3xS4SJtUcOmCvhBjBIjFjGYWFN2CVbt8edNOhBGMyzCM6NC16j6hwqzHV
 9bURMqf0j+KpD7Hrk7aT2gkW6CpRS6anKQKe86yCn32JfLTJxlQ=
 =0F6y
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers

soc: amlogic: updates for v5.4 (round 2)
- add power domain controller

* tag 'amlogic-drivers-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller

Link: https://patchwork.kernel.org/patch/11122205/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:28:58 +02:00
Arnd Bergmann 957af18f05 cmdq helper:
reoder function parameter and change size of the parameters
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAl1gFdEXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00NTzg/9EfnagKDnyXEBe0EgoembiKKC
 O1gOLNeMIRFeGo0N3oGz1Mwxyzf4QOHWsB8omrB2Ss/gt09/Zoyxq7WHxnBEuhMq
 AHZmdfVDTG4JxTHcClPg4O5PLY9zmk8wZBWwkyn1NOv5EKe1mGjai/0dyyh3WoHR
 VI6BUq+sTA2nliIaTll6BAX3IABY1tqclmmcndF6U0Os9OT6yb1T9Qka96z2j3L+
 uWMlE417LNAbK4t14h+Pem6Kik2qn5T0o+U1S6oqMmqVlYzTFUxiRGX+wb8P5nmU
 uEMsh1esczgTo5JBPjzRe3OLN4em7DZwOXbfp1baHxOyDINtt/FyuQmdPorVHGXi
 vOixSCigh7Dx61myI4bQS0booHN/KxJDjs02G01XYUzqBH6pyH+uKJBaR3zWzQqo
 Ea5HxWf7VHvPX+ZZJm/vusVqzQO1OomY3DNBJ9FGrPaHpptWgyfdVykfNtTPLcuL
 GaHa6HMXsX92SaFU/uovJ7lCI4XkfzbFhhiPopEeTRL2J6QeewqI2FfYvnQsJigE
 Ok9GXDaiy5nylQiBITFioGQ4P3ILzbK4RmozBmBGlwVILqet4IhkgB0DoouNH9iS
 RkV4mAxqKvOcwogLUKYNMlzW/5fvMxcq/BGNBzmJFQAJvLSLQc+j7hJ3qFkZe0CJ
 8m+qKI1T2Au/hrzzkIw=
 =WH2P
 -----END PGP SIGNATURE-----

Merge tag 'v5.3-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers

cmdq helper:
reoder function parameter and change size of the parameters

* tag 'v5.3-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: cmdq: change the type of input parameter
  soc: mediatek: cmdq: reorder the parameter

Link: https://lore.kernel.org/r/8c860e37-3816-d75f-fc37-ce496905ba73@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:18:34 +02:00
Arnd Bergmann 916b4ab867 soc: amlogic: driver updates for v5.4
Highlights
 - clk-measure: support new S905X3 and A311D SoCs
 - socinfo: support new S905X3 and A311D SoCs
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl1cbXEACgkQWTcYmtP7
 xmU5iQ//btRUq8o4I2hnmoKMCpsfv9tWA8/CnepjH0/uXL8Dd8um7bBkB1BByog8
 GSaLAxiL7C6WdUo9a206HP/FC7Rp9GpdBYSaGglbE4xng4LZpzhjQyuNhoozByFK
 ak94py6kzt6V4/XC+DTFhDirIz9D0WAhsyS8iXdc9BVynLd290OXUNxWTM7kJpnh
 NB3JuSEQB9JnXSBlNZ2cdoTFm2m/pujda17o4ycc4ZGFruNvXPHmcm9TvYns9id0
 aS9oA3QXq7+dWS7Hpr0uwoxqE9KZGVKN8VEwKdKc4PNlv+1z6/3W3CzbxLhpQU+q
 KK4bBBL99ZYaDb+lnxcuag+7yi8uRXG0aWZ2FkEoq+mKnOETodT8l/qVqf+3VHwF
 zLj6QqVEQMPmBZnW0NXIHVXCdmwKIhZA49K0Nu835X99rWdqWWlgGIh8PPDehRfS
 FC+Cd6IXK3VFKbssj9x59qGKle+jo2/mKe/roSnJlOp97JVUn/WXEBtRMcGs7DZf
 SpXxFAtGKi5qS2VVV7Dn+O/3B4PFwOs3JCEJiE4r0V0dwDEN8e2bzRf1tS1pRDqi
 SkUyNJ9gAnG2uFtTgost1ipGkfgqq4DLqA5GGiP/njxhPW83MuWp+KUuVorhVJTg
 y2g4tQVe9BEJTMadkgLNhhBRwz7XWhchxWJbxiKdpuIA3SdHPVk=
 =txyO
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers

soc: amlogic: driver updates for v5.4

Highlights
- clk-measure: support new S905X3 and A311D SoCs
- socinfo: support new S905X3 and A311D SoCs

* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: meson-gx-socinfo: Add of_node_put() before return
  soc: amlogic: clk-measure: Add support for SM1
  dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
  soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
  soc: amlogic: meson-gx-socinfo: add A311D id
  soc: amlogic: meson-clk-measure: add G12B second cluster cpu clk
  soc: amlogic: meson-clk-measure: protect measure with a mutex

Link: https://lore.kernel.org/r/7h7e77cwv5.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:12:10 +02:00
Arnd Bergmann 9ddb2526eb NXP/FSL SoC driver updates for v5.4
DPAA2 DPIO/MC driver
 - Remove explicit device_link_remove() and device_link_del() calls due to
 framework change
 
 DPAA QBman driver
 - Various changes to make it working with kexec
 - Remove dev_err() usage after platform_get_irq()
 
 GUTS driver
 - Add LS1028 SoC support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAl1XCAYACgkQhtxQDvus
 FVThUQ//bf+El82sfxyLDUeGo8OZ/tN82AOsoKpVSw8pFNIXJdsPOLavGaJF2ILv
 klWC6/gjFiusiXWuQkxPU3XD/tvgxnxwbwR0HojQIZDD8xPiY3LhK5gLLahnyu4N
 4dYrXguSaJB2t+I8Pn5S+1QtHvdLiHptbwWfg0DBd4WstPPmO2W2TMFSQMgfTzRv
 Y1vy9cJ/ybvnUu0ZpSAmUyUMY9cWLoKKgXONmIYBZg3Ar2bkBhYnFRfDXavuHpJQ
 LJMkRXkPsiq9cbuI/DiMcDOGwwYGG+7norrGYohTl9sSy+gfvSgszYgI7b0w5Sx/
 /NXmigojmRXOCICGCFXX+PVC2gWy9WAJhgSRXXEs+qHy03qJkSh8YbqP1lLyOZ/+
 r+hj7uHvyqxn2t5YThEYxpOURt7ztQdGvrzhiQEplmNYF1SOwKk+nypg9M2DYYG0
 OIZzjrUe3nMpBHbnGJJDcjQievI1xsqdyla9fby6w9wmfV9U3Xn9LVmCWNyOpl6k
 lcp7ayQHNxChsqFujyyyEhg4E7IyfvRCSCY+QT6aWb7ZIOuOAK0qsSZ76JxhqjDQ
 HXBcDTXsHZmkG5Cq3zcWUktehOgXsyuY4SXJUVIzMzQP07sMFxj08/zz3yKutl4O
 JLsXlXoJBl0peVJ6pXIiHbFr1jVvACjs2D1mnSuBP/OO+++HDM0=
 =KjF7
 -----END PGP SIGNATURE-----

Merge tag 'soc-fsl-next-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers

NXP/FSL SoC driver updates for v5.4

DPAA2 DPIO/MC driver
- Remove explicit device_link_remove() and device_link_del() calls due to
framework change

DPAA QBman driver
- Various changes to make it working with kexec
- Remove dev_err() usage after platform_get_irq()

GUTS driver
- Add LS1028 SoC support

* tag 'soc-fsl-next-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  bus: fsl-mc: remove explicit device_link_del
  soc: fsl: dpio: remove explicit device_link_remove
  soc: fsl: guts: Add definition for LS1028A
  soc/fsl/qbman: Update device tree with reserved memory
  soc/fsl/qbman: Fixup qman_shutdown_fq()
  soc/fsl/qbman: Disable interrupts during portal recovery
  soc/fsl/qbman: Fix drain_mr_fqni()
  soc/fsl/qbman: Cleanup QMan queues if device was already initialized
  soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup
  soc/fsl/qbman: Rework QBMan private memory setup
  soc: fsl: qbman: Remove dev_err() usage after platform_get_irq()

Link: https://lore.kernel.org/r/20190816195301.26660-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 22:06:07 +02:00
Arnd Bergmann 328790614d Renesas driver updates for v5.4 (take two)
- Improve "always-on" PM Domain handling on SH/R-Mobile SoCs,
   - Automatic errata selection for Cortex-A7/A9,
   - Small fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXV/SBwAKCRCKwlD9ZEnx
 cGNpAP0ck0BkVTdVsRRG17jo4su3i9Yhq2Weqw9z2s9JkygJvgEAvGsaJPxtq3Pk
 uhjkL67VVDq01sp/0WydkXqY3pErwgI=
 =cmiN
 -----END PGP SIGNATURE-----

Merge tag 'renesas-drivers-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers

Renesas driver updates for v5.4 (take two)

  - Improve "always-on" PM Domain handling on SH/R-Mobile SoCs,
  - Automatic errata selection for Cortex-A7/A9,
  - Small fixes and improvements.

* tag 'renesas-drivers-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9
  soc: renesas: Enable ARM_ERRATA_814220 for affected Cortex-A7
  soc: renesas: rmobile-sysc: Set GENPD_FLAG_ALWAYS_ON for always-on domain
  soc: renesas: rcar-sysc: Eliminate local variable gov
  soc: renesas: rcar-sysc: Add goto to of_node_put() before return

Link: https://lore.kernel.org/r/20190823123643.18799-5-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 20:20:43 +02:00
Arnd Bergmann 30a344004c Samsung soc drivers changes for v5.4
Add Exynos Chipid driver for identification of product IDs and SoC
 revisions.  The driver also exposes chipid regmap, later to be used by
 Exynos Adaptive Supply Voltage driver (adjusting voltages to different
 revisions of same SoC).
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl1W2AMQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD1/FxEACSrzTmqvbMgmL8NpKa73ALWH4LZdhxUFKS
 POgSxXAIIawxJRMGehReKD92rWoAbak/2AEPP35z1IJ80GUrjP88uy/kT0bXb6ZO
 m4h1XLModAW6jiXnRkzm9KnGrOuz4ZcFe+VbAO1AwGZobtMLqCUmGPphyNMC1tAY
 Et0/dsnFK8g2GEEIJKfmyfQzW5BnCJCTOoIqftH9LK/m4YvaooxJjTK9T0/n5up3
 k8xKazudRzi6J9DaYEfBlvmrD/GscBKpUBp39CSvGab9kpx+G4a+4jvUGutKNgdj
 iY6OoATHK+siFaqu/5PjBmlc6z+OY0yManXkZLDIejs4g5RZqtg0v4Mx7GeQVWX+
 xx5z1UbNqsIEbFCmF5ptTDehfN1WMk7DMdcI/xvzGU7/bOc8YEv0ERb2dTH1PAGr
 8YJFQaVgBN0+BFaz5al9EKKtFsqAA3KdKpMWTWfqtF0dJWJkmyECQTuMDjKVurqT
 z3FFLZXSmcxT+BceszXdghyKBG0pCMZ9E8dX8gMbcwNPcujQyoCbcnnugLs/Lekd
 CiNqYHx31T9l4V9mu6rKqm+kaIwaXCg7T6ydbVo6ysFUeC0tlfhSRWAxzUv+V04s
 6+13hMHvg269r1oUsKsJCvIBSnOvtgO4AxX0c2Z2oVQFP4PcD6w8/CGK4jw2Y+c4
 DkgKuYVJFQ==
 =7pIf
 -----END PGP SIGNATURE-----

Merge tag 'samsung-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers

Samsung soc drivers changes for v5.4

Add Exynos Chipid driver for identification of product IDs and SoC
revisions.  The driver also exposes chipid regmap, later to be used by
Exynos Adaptive Supply Voltage driver (adjusting voltages to different
revisions of same SoC).

* tag 'samsung-drivers-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  soc: samsung: chipid: Convert exynos-chipid driver to use the regmap API
  soc: samsung: Add exynos chipid driver support

Link: https://lore.kernel.org/r/20190816163042.6604-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03 19:05:46 +02:00
Geert Uytterhoeven 7a6c9dbb36 soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
The move of the IXP4xx SoC drivers exposed their config options on all
platforms.

Fix this by wrapping them inside an ARCH_IXP4XX or COMPILE_TEST block.

Link: https://lore.kernel.org/r/20190823090352.12243-1-linus.walleij@linaro.org
Fixes: fcf2d8978c ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-29 17:34:38 +02:00
Neil Armstrong eef3c2ba0a soc: amlogic: Add support for Everything-Else power domains controller
Add support for the General Purpose Amlogic Everything-Else Power controller,
with the first support for G12A and SM1 SoCs dedicated to the VPU, PCIe,
USB, NNA, GE2D and Ethernet Power Domains.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-28 14:29:37 -07:00
Guido Günther 968c6f4b3c soc: imx: gpcv2: Print the correct error code
The current code prints 'ret' (thus 0) while it should use 'err'.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-24 22:41:08 +02:00
Bibby Hsieh 556030f060 soc: mediatek: cmdq: change the type of input parameter
According to the cmdq hardware design, the subsys is u8,
the offset is u16 and the event id is u16.
This patch changes the type of subsys, offset and event id
to the correct type.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-23 14:06:48 +02:00
Bibby Hsieh 1a92f98912 soc: mediatek: cmdq: reorder the parameter
The order of gce instructions is [subsys offset value]
so reorder the parameter of cmdq_pkt_write_mask
and cmdq_pkt_write function.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-08-23 14:03:56 +02:00
Geert Uytterhoeven 2eced4607a soc: renesas: Enable ARM_ERRATA_754322 for affected Cortex-A9
ARM Erratum 754322 affects Cortex-A9 revisions r2p* and r3p*.

Automatically enable support code to mitigate the erratum when compiling
a kernel for any of the affected Renesas SoCs:
  - RZ/A1: r3p0,
  - R-Mobile A1: r2p4,
  - R-Car M1A: r2p2-00rel0,
  - R-Car H1: r3p0,
  - SH-Mobile AG5: r2p2.

EMMA Mobile EV2 (r1p3) and RZ/A2 (r4p1) are not affected.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-08-23 10:33:31 +02:00
Geert Uytterhoeven 435dce2da2 soc: renesas: Enable ARM_ERRATA_814220 for affected Cortex-A7
ARM Erratum 814220 affects Cortex-A7 revisions r0p2-r0p5.

Automatically enable support code to mitigate the erratum when compiling
a kernel for any of the affected Renesas SoCs:
  - R-Mobile APE6: r0p2,
  - RZ/G1E: r0p5,
  - RZ/G1C: r0p5,
  - R-Car H2: r0p3,
  - R-Car E2: r0p5,
  - RZ/N1: r0p5.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-08-23 10:33:31 +02:00
Geert Uytterhoeven af0bc63472 soc: renesas: rmobile-sysc: Set GENPD_FLAG_ALWAYS_ON for always-on domain
Currently the R-Mobile "always-on" PM Domain is implemented by returning
-EBUSY from the generic_pm_domain.power_off() callback, and doing
nothing in the generic_pm_domain.power_on() callback.  However, this
means the PM Domain core code is not aware of the semantics of this
special domain, leading to boot warnings like the following on
SH/R-Mobile SoCs:

    sh_cmt e6130000.timer: PM domain c5 will not be powered off

Fix this by making the always-on nature of the domain explicit instead,
by setting the GENPD_FLAG_ALWAYS_ON flag.  This removes the need for the
domain to provide power control callbacks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-23 09:58:01 +02:00
Sylwester Nawrocki 28578825ed soc: samsung: chipid: Select missing dependency for EXYNOS_CHIPID
The chipid driver uses the MFD syscon API but it was not covered
properly in Kconfig.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-22 20:16:20 +02:00
Sylwester Nawrocki 823034575c soc: samsung: chipid: Remove the regmap lookup error log
In commit 40d8aff614 ("soc: samsung: chipid: Convert exynos-chipid
driver to use the regmap API") of_find_compatible_node() call was
substituted with syscon_regmap_lookup_by_compatible() but also an error
log was added for case where lookup fails. On multiplatform the lookup
will always fail on any non-samsung device so the log is incorrect.
Remove the error log and just return an error code from
syscon_regmap_lookup_by_compatible() which internally calls
of_find_compatible_node().

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-22 20:15:38 +02:00
Sibi Sankar 1709510221 soc: qcom: aoss: Add AOSS QMP support
Add AOSS QMP support for SM8150 and SC7180 SoCs.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21 15:59:44 -07:00
Sibi Sankar f117249e4b soc: qcom: smem: Update max processor count
Update max processor count to reflect the number of
co-processors on SC7180 SoCs.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21 15:58:01 -07:00
Nishka Dasgupta 49ed86f503 soc: amlogic: meson-gx-socinfo: Add of_node_put() before return
The variable np in function meson_gx_socinfo_init takes the return value
of of_find_compatible_node, which gets a node but does not put it. If
this node is not put it may cause a memory leak. Hence put np after its
usefulness has been exhausted.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: a9daaba296 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-20 14:53:33 -07:00
Neil Armstrong 623699711a soc: amlogic: clk-measure: Add support for SM1
Add the clk-measurer clocks IDs for the Amlogic SM1 SoC family.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-20 12:21:13 -07:00
Neil Armstrong c9cc9bec36 soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
Add the SoC IDs for the S905X3 Amlogic SM1 SoC.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-08-20 08:32:58 -07:00
Colin Ian King 3636e82135 soc: samsung: chipid: Fix memory leak in error path
Currently when the call to product_id_to_soc_id fails there
is a memory leak of soc_dev_attr->revision and soc_dev_attr
on the error return path.  Fix this by adding a common error
return path that frees there obects and use this for two
error return paths.

Addresses-Coverity: ("Resource leak")
Fixes: 3253b7b7cd ("soc: samsung: Add exynos chipid driver support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-19 19:06:14 +02:00
Geert Uytterhoeven e0e1df6152 soc: renesas: rcar-sysc: Eliminate local variable gov
As of commit 980532a5dd ("soc: renesas: rcar-sysc: Use
GENPD_FLAG_ALWAYS_ON"), the local variable "gov" is assigned just once,
so it can be eliminated.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-08-19 14:56:14 +02:00
Nishka Dasgupta da51ceda8a soc: renesas: rcar-sysc: Add goto to of_node_put() before return
The local variable np in function rcar_sysc_pd_init takes the return
value of of_find_matching_node_and_match(), which gets a node but does
not put it.  If np is not put before the function returns, it may cause
a memory leak.

Hence, remove the return statement that does not immediately follow a
putting of np.  Replace it with a goto pointing to a pre-existing label
that first puts np and then returns the required value.

Issue found with Coccinelle.

Fixes: afa6f53df6 ("soc: renesas: rcar-sysc: Add support for fixing up power area tables")
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-19 14:56:14 +02:00
Ioana Ciornei c49a3a9cf2 soc: fsl: dpio: remove explicit device_link_remove
Starting with commit 72175d4ea4 ("driver core: Make driver core
own stateful device links") stateful device links are owned by the
driver core and should not be explicitly removed on device unbind.
Delete all device_link_remove appearances from the dpio driver.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 18:20:20 -05:00
Yinbo Zhu 80f97619f5 soc: fsl: guts: Add definition for LS1028A
Adding compatible string "ls1028a-dcfg" to initialize guts driver
for ls1028 and SoC die attribute definition for LS1028A

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:43:59 -05:00
Roy Pledge 6ea4c0fe45 soc/fsl/qbman: Update device tree with reserved memory
When using the reserved memory node in the device tree there are
two options - dynamic or static. If a dynamic allocation was
selected (where the kernel selects the address for the allocation)
convert it to a static allocation by inserting the reg property.
This will ensure the same memory is reused after a kexec()

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:42:00 -05:00
Roy Pledge e844168a8f soc/fsl/qbman: Fixup qman_shutdown_fq()
When shutting down a FQ on a dedicated channel only the
SW portal associated with that channel can dequeue from it.
Make sure the correct portal is use.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:41:56 -05:00
Roy Pledge ea2b8488ba soc/fsl/qbman: Disable interrupts during portal recovery
Disable the QBMan interrupts during recovery.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:41:53 -05:00
Roy Pledge 627da8bad5 soc/fsl/qbman: Fix drain_mr_fqni()
The drain_mr_fqni() function may be called fron uninterruptable
context so convert the msleep() to an mdelay().  Also ensure that
the valid bit is updated while polling.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:41:49 -05:00
Roy Pledge c5501aa92a soc/fsl/qbman: Cleanup QMan queues if device was already initialized
If the QMan device was previously initialized make sure all the
frame queues are out of service once all the portals are probed.
This handles the case where the kernel is restarted without the
SoC being reset (kexec for example)

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:41:47 -05:00
Roy Pledge 0505d00c8d soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup
Clean the BMan buffer pools if the device had been initialized
previously.  This will ensure a consistent state if the kernel
was soft restarted (kexec for example)

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:41:42 -05:00
Roy Pledge 97777078d6 soc/fsl/qbman: Rework QBMan private memory setup
Rework QBMan private memory setup so that the areas are not
zeroed if the device was previously initialized

If the QMan private memory was already initialized skip the PFDR
initialization.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:41:32 -05:00
Stephen Boyd 031bca078e soc: fsl: qbman: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Thierry Reding <treding@nvidia.com>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-08-15 16:31:45 -05:00
Sylwester Nawrocki 40d8aff614 soc: samsung: chipid: Convert exynos-chipid driver to use the regmap API
Convert the driver to use regmap API in order to allow other
drivers, like ASV, to access the CHIPID registers.

Add definition of selected CHIPID register offsets and register bit
fields for Exynos5422 SoC.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-15 20:25:25 +02:00
Pankaj Dubey 3253b7b7cd soc: samsung: Add exynos chipid driver support
Exynos SoCs have Chipid, for identification of product IDs and SoC
revisions. This patch intends to provide initialization code for all
these functionalities, at the same time it provides some sysfs entries
for accessing these information to user-space.

This driver uses existing binding for exynos-chipid.

Changes by Bartlomiej:
- fixed return values on errors
- removed bogus kfree_const()
- added missing Exynos4210 EVT0 id
- converted code to use EXYNOS_MASK define
- fixed np use after of_node_put()
- fixed too early use of dev_info()
- made driver fail for unknown SoC-s
- added SPDX tag
- updated Copyrights

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
[m.szyprowski: for suggestion and code snippet of product_id_to_soc_id]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[s.nawrocki: updated copyright date, removed uneeded headers inclusion]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-08-15 20:17:11 +02:00
Arnd Bergmann c372740c07 Fixes for omap variants for v5.3-rc cycle
We have another fix to disable voltage switching for am57xx SDIO as
 the bootrom cannot handle all the voltages after a reset that thought
 I had already sent a pull request for earlier but forgot. And we also
 update dra74x iodelay configuration for mmc3 to use the recommended
 values.
 
 Then I noticed we had introduced few new boot warnings with the various
 recent ti-sysc changes and wanted to fix those. I also noticed we still
 have too many warnings to be able to spot the real ones easily and fixed
 up few of those. Sure some of the warnings have been around for a long
 time and few of the fixes could have waited for the merge window, but
 having more usable dmesg log level output is a valuable.
 
 Other fixes are IO size correction for am335x UARTs that cause issues
 for at least FreeBSD using the same device tree file that checks that
 the child IO range is not larger than the parent has.
 
 For omap1 ams-delta keyboard we need to fix a irq ack that broke with
 all the recent gpio changes.
 
 And there are also few static checker warning fixes for recent am335x
 PM changes and ti-sysc driver and one switch fall-though update.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl1U4r8RHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXPeSg/+OBq0tWVzAmWTYguIxObg6MR3YCin/wC8
 ObX62E3++l8PHV7dmF+oh+c9Ab6kEqD7Czadz7+vYpFuDoNiiNY5SKdthNS7WAdT
 scTwa40pS2zT4FVJ9NFyRokvFOmtQ4o3LYtjydcWo7Ej0vC0ZyHYirZl+DR9//Cl
 Omo6WwpHVUm7REbzo+EE7H5yGZWKwKeQ2pZAG7BiQEQGKVgsrb6niiXWbM6Y6H98
 B1uqTinxh4nojmj0kZrhjOCOsQyPoHcOt4BzquC5UT/ZgBKldIdGK7y6S8fb7r7o
 yJdbh1FV7en/baf9YoIORD7pGyaSPkQ+z+mNtepY0Z1ZJ1hSdQ0dyXNZnx5QyWhC
 i/UoC+/qdtUXlLFkCsf4YvAsTVCD2FjpjMKbXpu8GBE4Z7avx8SSerwqXuFEPPmp
 9SpsGprkKXwt811I0BlgpZLr97vxICfckphew52X0ef97AuULoR1HMVjPqBg4/3D
 2eKear74SNbrHqixTnXs8HuwSeHLfSYq1QatKRK0dF+4E+a0hu8RAh0HE9uA/uur
 KyG+CcNNtcMxk3mtXGuSIK9U+3oBs5TN8F+T+K8Zw6HZZvRxToqZ351xApwmR5tK
 OXAZc4k1APJM7KrxhVfgY4gzSqMXDaFfgtvqjo4Rtt+BYQOaNwIqmFudjmemlJAe
 3lhZcqTFwUo=
 =TsdN
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.3/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omap variants for v5.3-rc cycle

We have another fix to disable voltage switching for am57xx SDIO as
the bootrom cannot handle all the voltages after a reset that thought
I had already sent a pull request for earlier but forgot. And we also
update dra74x iodelay configuration for mmc3 to use the recommended
values.

Then I noticed we had introduced few new boot warnings with the various
recent ti-sysc changes and wanted to fix those. I also noticed we still
have too many warnings to be able to spot the real ones easily and fixed
up few of those. Sure some of the warnings have been around for a long
time and few of the fixes could have waited for the merge window, but
having more usable dmesg log level output is a valuable.

Other fixes are IO size correction for am335x UARTs that cause issues
for at least FreeBSD using the same device tree file that checks that
the child IO range is not larger than the parent has.

For omap1 ams-delta keyboard we need to fix a irq ack that broke with
all the recent gpio changes.

And there are also few static checker warning fixes for recent am335x
PM changes and ti-sysc driver and one switch fall-though update.

* tag 'omap-for-v5.3/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  soc: ti: pm33xx: Make two symbols static
  soc: ti: pm33xx: Fix static checker warnings
  ARM: OMAP: dma: Mark expected switch fall-throughs
  ARM: dts: Fix incomplete dts data for am3 and am4 mmc
  bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
  ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
  ARM: dts: dra74x: Fix iodelay configuration for mmc3
  ARM: dts: am335x: Fix UARTs length
  ARM: OMAP2+: Fix omap4 errata warning on other SoCs
  ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
  ARM: dts: Fix flags for gpio7
  bus: ti-sysc: Fix using configured sysc mask value
  bus: ti-sysc: Fix handling of forced idle
  ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss
  ARM: dts: am57xx: Disable voltage switching for SD card

Link: https://lore.kernel.org/r/pull-1565844391-332885@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15 14:27:42 +02:00
Arnd Bergmann a3950da161 Merge tag 'ux500-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/soc
This is a slew of Ux500 updates for the v5.4 kernel cycle:

- Stop populating the PRCMU devices from the core CPU
  file, it works just fine at device_initcall() level.

- Add a missing of_node_put() in the core file.

- Simplify the debug UART code.

- Add myself to MAINTAINERS

* tag 'ux500-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  MAINTAINERS: add soc/ux500
  ARM: ux500: simplify and move debug UART
  ARM: ux500: add missing of_node_put()
  ARM: ux500: Stop populating the PRCMU devices early

Link: https://lore.kernel.org/r/CACRpkdbH-h5fRwuidcpeOp8mtRoKUW65SAk8a4A==BCDzn3QMA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14 15:37:17 +02:00
Arnd Bergmann 5ef9eb7ca3 Renesas driver updates for v5.4
- Fix a flexible array member definition in the R-Car SYSC driver.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXUQczwAKCRCKwlD9ZEnx
 cKN7AQCqies8aPvDBHhx4TmGi3rAutEcYtvJGpYfEqON2neKIwD8C3/iPd+NUQdH
 Q4ulQIhTFkrIXyobb5BrMD3QENygtgA=
 =LULc
 -----END PGP SIGNATURE-----

Merge tag 'renesas-drivers-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers

Renesas driver updates for v5.4

  - Fix a flexible array member definition in the R-Car SYSC driver.

* tag 'renesas-drivers-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: rcar-sysc: Use [] to denote a flexible array member

Link: https://lore.kernel.org/r/20190802120355.1430-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14 15:26:43 +02:00
YueHaibing 4a65bbb910 soc: ti: pm33xx: Make two symbols static
Fix sparse warnings:

drivers/soc/ti/pm33xx.c:144:27: warning: symbol 'rtc_wake_src' was not declared. Should it be static?
drivers/soc/ti/pm33xx.c:160:5: warning: symbol 'am33xx_rtc_only_idle' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 05:05:38 -07:00
Keerthy d8e0cecbca soc: ti: pm33xx: Fix static checker warnings
The patch fixes a bunch of static checker warnings.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13 05:04:12 -07:00
Anson Huang 73feb4d0f8 soc: imx-scu: Add SoC UID(unique identifier) support
Add i.MX SCU SoC's UID(unique identifier) support, user
can read it from sysfs:

root@imx8qxpmek:~# cat /sys/devices/soc0/soc_uid
7B64280B57AC1898

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-12 14:34:54 +02:00
Bjorn Andersson 7bea41c4a2 soc: qcom: socinfo: Annotate switch cases with fall through
Introduce fall through annotations in the switch statements of
socinfo_debugfs_init() to silence compiler warnings.

Acked-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Fixes: 9c84c1e786 ("soc: qcom: socinfo: Expose custom attributes")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-06 22:42:50 -07:00