Граф коммитов

238 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 36805aaea5 Merge branch 'for-3.11/core' of git://git.kernel.dk/linux-block
Pull core block IO updates from Jens Axboe:
 "Here are the core IO block bits for 3.11. It contains:

   - A tweak to the reserved tag logic from Jan, for weirdo devices with
     just 3 free tags.  But for those it improves things substantially
     for random writes.

   - Periodic writeback fix from Jan.  Marked for stable as well.

   - Fix for a race condition in IO scheduler switching from Jianpeng.

   - The hierarchical blk-cgroup support from Tejun.  This is the grunt
     of the series.

   - blk-throttle fix from Vivek.

  Just a note that I'm in the middle of a relocation, whole family is
  flying out tomorrow.  Hence I will be awal the remainder of this week,
  but back at work again on Monday the 15th.  CC'ing Tejun, since any
  potential "surprises" will most likely be from the blk-cgroup work.
  But it's been brewing for a while and sitting in my tree and
  linux-next for a long time, so should be solid."

* 'for-3.11/core' of git://git.kernel.dk/linux-block: (36 commits)
  elevator: Fix a race in elevator switching
  block: Reserve only one queue tag for sync IO if only 3 tags are available
  writeback: Fix periodic writeback after fs mount
  blk-throttle: implement proper hierarchy support
  blk-throttle: implement throtl_grp->has_rules[]
  blk-throttle: Account for child group's start time in parent while bio climbs up
  blk-throttle: add throtl_qnode for dispatch fairness
  blk-throttle: make throtl_pending_timer_fn() ready for hierarchy
  blk-throttle: make tg_dispatch_one_bio() ready for hierarchy
  blk-throttle: make blk_throtl_bio() ready for hierarchy
  blk-throttle: make blk_throtl_drain() ready for hierarchy
  blk-throttle: dispatch from throtl_pending_timer_fn()
  blk-throttle: implement dispatch looping
  blk-throttle: separate out throtl_service_queue->pending_timer from throtl_data->dispatch_work
  blk-throttle: set REQ_THROTTLED from throtl_charge_bio() and gate stats update with it
  blk-throttle: implement sq_to_tg(), sq_to_td() and throtl_log()
  blk-throttle: add throtl_service_queue->parent_sq
  blk-throttle: generalize update_disptime optimization in blk_throtl_bio()
  blk-throttle: dispatch to throtl_data->service_queue.bio_lists[]
  blk-throttle: move bio_lists[] and friends to throtl_service_queue
  ...
2013-07-11 13:03:24 -07:00
Mel Gorman b45972265f mm: vmscan: take page buffers dirty and locked state into account
Page reclaim keeps track of dirty and under writeback pages and uses it
to determine if wait_iff_congested() should stall or if kswapd should
begin writing back pages.  This fails to account for buffer pages that
can be under writeback but not PageWriteback which is the case for
filesystems like ext3 ordered mode.  Furthermore, PageDirty buffer pages
can have all the buffers clean and writepage does no IO so it should not
be accounted as congested.

This patch adds an address_space operation that filesystems may
optionally use to check if a page is really dirty or really under
writeback.  An implementation is provided for for buffer_heads is added
and used for block operations and ext3 in ordered mode.  By default the
page flags are obeyed.

Credit goes to Jan Kara for identifying that the page flags alone are
not sufficient for ext3 and sanity checking a number of ideas on how the
problem could be addressed.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:29 -07:00
Al Viro 5d48f3a2de block_dev: switch to fixed_size_llseek()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:57:52 +04:00
Jan Kara a5faeaf910 writeback: Fix periodic writeback after fs mount
Code in blkdev.c moves a device inode to default_backing_dev_info when
the last reference to the device is put and moves the device inode back
to its bdi when the first reference is acquired. This includes moving to
wb.b_dirty list if the device inode is dirty. The code however doesn't
setup timer to wake corresponding flusher thread and while wb.b_dirty
list is non-empty __mark_inode_dirty() will not set it up either. Thus
periodic writeback is effectively disabled until a sync(2) call which can
lead to unexpected data loss in case of crash or power failure.

Fix the problem by setting up a timer for periodic writeback in case we
add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi().

Reported-by: Bert De Jonghe <Bert.DeJonghe@amplidata.com>
CC: stable@vger.kernel.org # >= 3.0
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-06-28 16:04:02 +02:00
Linus Torvalds 4de13d7aa8 Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-block
Pull block core updates from Jens Axboe:

 - Major bit is Kents prep work for immutable bio vecs.

 - Stable candidate fix for a scheduling-while-atomic in the queue
   bypass operation.

 - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
   discard bios.

 - Tejuns changes to convert the writeback thread pool to the generic
   workqueue mechanism.

 - Runtime PM framework, SCSI patches exists on top of these in James'
   tree.

 - A few random fixes.

* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
  relay: move remove_buf_file inside relay_close_buf
  partitions/efi.c: replace useless kzalloc's by kmalloc's
  fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
  block: fix max discard sectors limit
  blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
  Documentation: cfq-iosched: update documentation help for cfq tunables
  writeback: expose the bdi_wq workqueue
  writeback: replace custom worker pool implementation with unbound workqueue
  writeback: remove unused bdi_pending_list
  aoe: Fix unitialized var usage
  bio-integrity: Add explicit field for owner of bip_buf
  block: Add an explicit bio flag for bios that own their bvec
  block: Add bio_alloc_pages()
  block: Convert some code to bio_for_each_segment_all()
  block: Add bio_for_each_segment_all()
  bounce: Refactor __blk_queue_bounce to not use bi_io_vec
  raid1: use bio_copy_data()
  pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
  pktcdvd: use bio_copy_data()
  block: Add bio_copy_data()
  ...
2013-05-08 10:13:35 -07:00
Linus Torvalds 5af43c24ca Merge branch 'akpm' (incoming from Andrew)
Merge more incoming from Andrew Morton:

 - Various fixes which were stalled or which I picked up recently

 - A large rotorooting of the AIO code.  Allegedly to improve
   performance but I don't really have good performance numbers (I might
   have lost the email) and I can't raise Kent today.  I held this out
   of 3.9 and we could give it another cycle if it's all too late/scary.

I ended up taking only the first two thirds of the AIO rotorooting.  I
left the percpu parts and the batch completion for later.  - Linus

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (33 commits)
  aio: don't include aio.h in sched.h
  aio: kill ki_retry
  aio: kill ki_key
  aio: give shared kioctx fields their own cachelines
  aio: kill struct aio_ring_info
  aio: kill batch allocation
  aio: change reqs_active to include unreaped completions
  aio: use cancellation list lazily
  aio: use flush_dcache_page()
  aio: make aio_read_evt() more efficient, convert to hrtimers
  wait: add wait_event_hrtimeout()
  aio: refcounting cleanup
  aio: make aio_put_req() lockless
  aio: do fget() after aio_get_req()
  aio: dprintk() -> pr_debug()
  aio: move private stuff out of aio.h
  aio: add kiocb_cancel()
  aio: kill return value of aio_complete()
  char: add aio_{read,write} to /dev/{null,zero}
  aio: remove retry-based AIO
  ...
2013-05-07 20:49:51 -07:00
Kent Overstreet a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Al Viro 4385bab128 make blkdev_put() return void
same story as with the previous patches - note that return
value of blkdev_close() is lost, since there's nowhere the
caller (__fput()) could return it to.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-07 02:16:31 -04:00
Al Viro db2a144bed block_device_operations->release() should return void
The value passed is 0 in all but "it can never happen" cases (and those
only in a couple of drivers) *and* it would've been lost on the way
out anyway, even if something tried to pass something meaningful.
Just don't bother.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-07 02:16:21 -04:00
Yan Hong b4ea2eaa11 fs/block_dev.c: no need to check inode->i_bdev in bd_forget()
Its only caller evict() has promised a non-NULL inode->i_bdev.

Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:00 -07:00
Gu Zheng 6f8f5c260a fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
blkdev_aio_read() test 'size' to see if it is equal or greater than the
target count we request(iocb->ki_left).  If so there is no need to call
iov_shorten() to reduce number of segments and the iovec's length.  So the
judgement should be changed to 'if (size < iocb->ki_left)' instead.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-04-29 21:24:30 +02:00
Anatol Pomozov c1681bf8a7 loop: prevent bdev freeing while device in use
struct block_device lifecycle is defined by its inode (see fs/block_dev.c) -
block_device allocated first time we access /dev/loopXX and deallocated on
bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile"
we want that block_device stay alive until we destroy the loop device
with "losetup -d".

But because we do not hold /dev/loopXX inode its counter goes 0, and
inode/bdev can be destroyed at any moment. Usually it happens at memory
pressure or when user drops inode cache (like in the test below). When later in
loop_clr_fd() we want to use bdev we have use-after-free error with following
stack:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000280
  bd_set_size+0x10/0xa0
  loop_clr_fd+0x1f8/0x420 [loop]
  lo_ioctl+0x200/0x7e0 [loop]
  lo_compat_ioctl+0x47/0xe0 [loop]
  compat_blkdev_ioctl+0x341/0x1290
  do_filp_open+0x42/0xa0
  compat_sys_ioctl+0xc1/0xf20
  do_sys_open+0x16e/0x1d0
  sysenter_dispatch+0x7/0x1a

To prevent use-after-free we need to grab the device in loop_set_fd()
and put it later in loop_clr_fd().

The issue is reprodusible on current Linus head and v3.3. Here is the test:

  dd if=/dev/zero of=loop.file bs=1M count=1
  while [ true ]; do
    losetup /dev/loop0 loop.file
    echo 2 > /proc/sys/vm/drop_caches
    losetup -d /dev/loop0
  done

[ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every
  time we call loop_set_fd() we check that loop_device->lo_state is
  Lo_unbound and set it to Lo_bound If somebody will try to set_fd again
  it will get EBUSY.  And if we try to loop_clr_fd() on unbound loop
  device we'll get ENXIO.

  loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under
  loop_device->lo_ctl_mutex. ]

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-01 15:48:47 -07:00
Linus Torvalds ee89f81252 Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block
Pull block IO core bits from Jens Axboe:
 "Below are the core block IO bits for 3.9.  It was delayed a few days
  since my workstation kept crashing every 2-8h after pulling it into
  current -git, but turns out it is a bug in the new pstate code (divide
  by zero, will report separately).  In any case, it contains:

   - The big cfq/blkcg update from Tejun and and Vivek.

   - Additional block and writeback tracepoints from Tejun.

   - Improvement of the should sort (based on queues) logic in the plug
     flushing.

   - _io() variants of the wait_for_completion() interface, using
     io_schedule() instead of schedule() to contribute to io wait
     properly.

   - Various little fixes.

  You'll get two trivial merge conflicts, which should be easy enough to
  fix up"

Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42ca: "hlist: drop the node parameter from iterators").

* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
  block: remove redundant check to bd_openers()
  block: use i_size_write() in bd_set_size()
  cfq: fix lock imbalance with failed allocations
  drivers/block/swim3.c: fix null pointer dereference
  block: don't select PERCPU_RWSEM
  block: account iowait time when waiting for completion of IO request
  sched: add wait_for_completion_io[_timeout]
  writeback: add more tracepoints
  block: add block_{touch|dirty}_buffer tracepoint
  buffer: make touch_buffer() an exported function
  block: add @req to bio_{front|back}_merge tracepoints
  block: add missing block_bio_complete() tracepoint
  block: Remove should_sort judgement when flush blk_plug
  block,elevator: use new hashtable implementation
  cfq-iosched: add hierarchical cfq_group statistics
  cfq-iosched: collect stats from dead cfqgs
  cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
  blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
  block: RCU free request_queue
  blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
  ...
2013-02-28 12:52:24 -08:00
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Guo Chao de33127d8d block: remove redundant check to bd_openers()
bd_openers is stable under bd_mutex, no need to check it twice.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22 10:42:46 +01:00
Guo Chao d646a02a9d block: use i_size_write() in bd_set_size()
blkdev_ioctl(GETBLKSIZE) uses i_size_read() to read size of block device.
If we update block size directly, reader may see intermediate result in
some machines and configurations.  Use i_size_write() instead.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: M. Hindess <hindessm@uk.ibm.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22 10:42:46 +01:00
MITSUNARI Shigeo 7630b661da fs/block_dev.c: page cache wrongly left invalidated after revalidate_disk()
We found that bdev->bd_invalidated was left set once revalidate_disk()
is called, which results in page cache flush every time that device is
open.

Specifically, we found this problem in MD block device.  Once we resize
a MD device, mdadm --monitor periodically flush all page cache for that
device every 60 or 1000 seconds when it opens the device.

This bug lies since at least 3.2.0 till the latest kernel(3.6.2).  Patch
is attached.

The following steps will reproduce the problem.

1. prepair a block device (eg /dev/sdb).

2. create two partitions:

   sudo parted /dev/sdb
   mklabel gpt
   mkpart primary 0% 50%
   mkpart primary 50% 100%

3. create a md device.

   sudo mdadm -C /dev/md/hoge -l 1 -n 2 -e 1.2 --assume-clean --auto=md --symlink=no /dev/sdb1 /dev/sdb2

4. create file system and mount it

   sudo mkfs.ext3 /dev/md/hoge
   sudo mkdir /mnt/test
   sudo mount /dev/md/hoge /mnt/test

5. try to resize the device

   sudo mdadm -G /dev/md/hoge --size=max

6. create a file to fill file cache.

  sudo dd if=/dev/urandom of=/mnt/test/data bs=1M count=10

and verify the current status of file by free command.

7. mdadm monitor will open the md device every 1000 seconds and you
   will find all file cache on the device are cleared.

The timing can be reduced by the following steps.

a) kill mdadm and restart it with --delay option

   /sbin/mdadm --monitor --delay=30 --pid-file /var/run/mdadm/monitor.pid --daemonise --scan --syslog

or open the md device directly.

   sudo dd if=/dev/md/hoge of=/dev/null bs=4096 count=1

Signed-off-by: MITSUNARI Shigeo <herumi@nifty.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:16 -08:00
Andrew Morton 965c8e59cf lseek: the "whence" argument is called "whence"
But the kernel decided to call it "origin" instead.  Fix most of the
sites.

Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:12 -08:00
Linus Torvalds 684c9aaebb vfs: fix O_DIRECT read past end of block device
The direct-IO write path already had the i_size checks in mm/filemap.c,
but it turns out the read path did not, and removing the block size
checks in fs/block_dev.c (commit bbec0270bdd8: "blkdev_max_block: make
private to fs/buffer.c") removed the magic "shrink IO to past the end of
the device" code there.

Fix it by truncating the IO to the size of the block device, like the
write path already does.

NOTE! I suspect the write path would be *much* better off doing it this
way in fs/block_dev.c, rather than hidden deep in mm/filemap.c.  The
mm/filemap.c code is extremely hard to follow, and has various
conditionals on the target being a block device (ie the flag passed in
to 'generic_write_checks()', along with a conditional update of the
inode timestamp etc).

It is also quite possible that we should treat this whole block device
size as a "s_maxbytes" issue, and try to make the logic even more
generic.  However, in the meantime this is the fairly minimal targeted
fix.

Noted by Milan Broz thanks to a regression test for the cryptsetup
reencrypt tool.

Reported-and-tested-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-08 08:28:26 -08:00
Linus Torvalds bbec0270bd blkdev_max_block: make private to fs/buffer.c
We really don't want to look at the block size for the raw block device
accesses in fs/block-dev.c, because it may be changing from under us.
So get rid of the max_block logic entirely, since the caller should
already have done it anyway.

That leaves the only user of this function in fs/buffer.c, so move the
whole function there and make it static.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29 17:48:12 -08:00
Linus Torvalds 1e8b33328a blockdev: remove bd_block_size_semaphore again
This reverts the block-device direct access code to the previous
unlocked code, now that fs/buffer.c no longer needs external locking.

With this, fs/block_dev.c is back to the original version, apart from a
whitespace cleanup that I didn't want to revert.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-29 10:52:19 -08:00
Mikulas Patocka 1a25b1c4ce Lock splice_read and splice_write functions
Functions generic_file_splice_read and generic_file_splice_write access
the pagecache directly. For block devices these functions must be locked
so that block size is not changed while they are in progress.

This patch is an additional fix for commit b87570f5d3 ("Fix a crash
when block device is read and block size is changed at the same time")
that locked aio_read, aio_write and mmap against block size change.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-28 10:59:37 -07:00
Linus Torvalds ce40be7a82 Merge branch 'for-3.7/core' of git://git.kernel.dk/linux-block
Pull block IO update from Jens Axboe:
 "Core block IO bits for 3.7.  Not a huge round this time, it contains:

   - First series from Kent cleaning up and generalizing bio allocation
     and freeing.

   - WRITE_SAME support from Martin.

   - Mikulas patches to prevent O_DIRECT crashes when someone changes
     the block size of a device.

   - Make bio_split() work on data-less bio's (like trim/discards).

   - A few other minor fixups."

Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew
Morton.  It is due to the VM no longer using a prio-tree (see commit
6b2dbba8b6ac: "mm: replace vma prio_tree with an interval tree").

So make set_blocksize() use mapping_mapped() instead of open-coding the
internal VM knowledge that has changed.

* 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits)
  block: makes bio_split support bio without data
  scatterlist: refactor the sg_nents
  scatterlist: add sg_nents
  fs: fix include/percpu-rwsem.h export error
  percpu-rw-semaphore: fix documentation typos
  fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared
  blockdev: turn a rw semaphore into a percpu rw semaphore
  Fix a crash when block device is read and block size is changed at the same time
  block: fix request_queue->flags initialization
  block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()
  block: ioctl to zero block ranges
  block: Make blkdev_issue_zeroout use WRITE SAME
  block: Implement support for WRITE SAME
  block: Consolidate command flag and queue limit checks for merges
  block: Clean up special command handling logic
  block/blk-tag.c: Remove useless kfree
  block: remove the duplicated setting for congestion_threshold
  block: reject invalid queue attribute values
  block: Add bio_clone_bioset(), bio_clone_kmalloc()
  block: Consolidate bio_alloc_bioset(), bio_kmalloc()
  ...
2012-10-11 09:04:23 +09:00
Fengguang Wu 3eab7315c8 fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared
blkdev_mmap() isn't used outside of fs/block_dev.c, mark it as
static.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-26 09:57:55 +02:00
Mikulas Patocka 62ac665ff9 blockdev: turn a rw semaphore into a percpu rw semaphore
This avoids cache line bouncing when many processes lock the semaphore
for read.

New percpu lock implementation

The lock consists of an array of percpu unsigned integers, a boolean
variable and a mutex.

When we take the lock for read, we enter rcu read section, check for a
"locked" variable. If it is false, we increase a percpu counter on the
current cpu and exit the rcu section. If "locked" is true, we exit the
rcu section, take the mutex and drop it (this waits until a writer
finished) and retry.

Unlocking for read just decreases percpu variable. Note that we can
unlock on a difference cpu than where we locked, in this case the
counter underflows. The sum of all percpu counters represents the number
of processes that hold the lock for read.

When we need to lock for write, we take the mutex, set "locked" variable
to true and synchronize rcu. Since RCU has been synchronized, no
processes can create new read locks. We wait until the sum of percpu
counters is zero - when it is, there are no readers in the critical
section.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-26 07:46:43 +02:00
Mikulas Patocka b87570f5d3 Fix a crash when block device is read and block size is changed at the same time
The kernel may crash when block size is changed and I/O is issued
simultaneously.

Because some subsystems (udev or lvm) may read any block device anytime,
the bug actually puts any code that changes a block device size in
jeopardy.

The crash can be reproduced if you place "msleep(1000)" to
blkdev_get_blocks just before "bh->b_size = max_blocks <<
inode->i_blkbits;".
Then, run "dd if=/dev/ram0 of=/dev/null bs=4k count=1 iflag=direct"
While it is waiting in msleep, run "blockdev --setbsz 2048 /dev/ram0"
You get a BUG.

The direct and non-direct I/O is written with the assumption that block
size does not change. It doesn't seem practical to fix these crashes
one-by-one there may be many crash possibilities when block size changes
at a certain place and it is impossible to find them all and verify the
code.

This patch introduces a new rw-lock bd_block_size_semaphore. The lock is
taken for read during I/O. It is taken for write when changing block
size. Consequently, block size can't be changed while I/O is being
submitted.

For asynchronous I/O, the patch only prevents block size change while
the I/O is being submitted. The block size can change when the I/O is in
progress or when the I/O is being finished. This is acceptable because
there are no accesses to block size when asynchronous I/O is being
finished.

The patch prevents block size changing while the device is mapped with
mmap.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-09-26 07:46:40 +02:00
Jianpeng Ma 53362a05ae fs/block-dev.c:fix performance regression in O_DIRECT writes to md block devices
For regular file, write operaion used blk_plug function.But for block
file,write operation did not use blk_plug.
This patch is also for write-cache mode for block-device.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-08-02 09:50:39 +02:00
Jan Kara 5c0d6b60a0 vfs: Create function for iterating over block devices
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22 23:58:45 +04:00
Linus Torvalds 90324cc1b1 avoid iput() from flusher thread
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPw2J/AAoJECvKgwp+S8Ja5jkP/3uMxkhf8XQpXCI3O1QVfaQr
 uZFfM8sINqIPDVm1dtFjFj7f8Bw9mhE2KAnnJ1rKT8tQwqq9yAse1QPlhCG1ZqoP
 +AnMDDXHtx7WmQZXhBvS9b+unpZ7Jr6r6pO5XrmTL2kRL3YJPUhZ2+xbTT5belTB
 KoAu4WqORZRxfXoC76S7U8K+D4NcAGhAOxCClsIjmY+oocCiCag4FZOyzYIFViqc
 ghUN/+rLQ3fqGGv2yO7Ylx1gUM7sxIwkZQ/h962jFAtxz9czImr2NmRoMliOaOkS
 tvcnIf+E3u0n/zIjzFvzhxKgHJPP8PkcPMk60d3jKmFngBkqFTzNUeVTP8md7HrV
 4DlXisWr+z7YVyWUCFaNcJLmjiWSwQ8DV/clRLobeBf9EJKan5F1PjFgl6PLJM5F
 Qr1+LHMNaetdulBwMRTyveZTzYqw9RmDnD9dWMo4mX/kTpvtC4jTPVV7hkRD+Qlv
 5vTRR+VXL3Q50yClLf0AQMSKTnH2gBuepM/b+7cShLGfsMln8DtUjmbigv+niL63
 BibcCIbIlP2uWGnl37VhsC34AT+RKt3lggrBOpn/7XJMq/wKR7IRP/7V9TfYgaUN
 NBa+wtnLDa1pZEn/X7izdcQP62PzDtmB+ObvYT0Yb40A4+2ud3qF/lB53c1A1ewF
 /9c4zxxekjHZnn2oooEa
 =oLXf
 -----END PGP SIGNATURE-----

Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux

Pull writeback tree from Wu Fengguang:
 "Mainly from Jan Kara to avoid iput() in the flusher threads."

* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Avoid iput() from flusher thread
  vfs: Rename end_writeback() to clear_inode()
  vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
  writeback: Refactor writeback_single_inode()
  writeback: Remove wb->list_lock from writeback_single_inode()
  writeback: Separate inode requeueing after writeback
  writeback: Move I_DIRTY_PAGES handling
  writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
  writeback: Move clearing of I_SYNC into inode_sync_complete()
  writeback: initialize global_dirty_limit
  fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
  mm: page-writeback.c: local functions should not be exposed globally
2012-05-28 09:54:45 -07:00
Jeff Moyer 080399aaaf block: don't mark buffers beyond end of disk as mapped
Hi,

We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk.  It can
easily be reproduced by doing the following:

[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s

In dmesg, you'll find the following:

squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.106012] attempt to access beyond end of device
[   43.106029] loop0: rw=0, want=277410, limit=277408
[   43.106039] Buffer I/O error on device loop0, logical block 138704
[   43.106053] attempt to access beyond end of device
[   43.106057] loop0: rw=0, want=277412, limit=277408
[   43.106061] Buffer I/O error on device loop0, logical block 138705
[   43.106066] attempt to access beyond end of device
[   43.106070] loop0: rw=0, want=277414, limit=277408
[   43.106073] Buffer I/O error on device loop0, logical block 138706
[   43.106078] attempt to access beyond end of device
[   43.106081] loop0: rw=0, want=277416, limit=277408
[   43.106085] Buffer I/O error on device loop0, logical block 138707
[   43.106089] attempt to access beyond end of device
[   43.106093] loop0: rw=0, want=277418, limit=277408
[   43.106096] Buffer I/O error on device loop0, logical block 138708
[   43.106101] attempt to access beyond end of device
[   43.106104] loop0: rw=0, want=277420, limit=277408
[   43.106108] Buffer I/O error on device loop0, logical block 138709
[   43.106112] attempt to access beyond end of device
[   43.106116] loop0: rw=0, want=277422, limit=277408
[   43.106120] Buffer I/O error on device loop0, logical block 138710
[   43.106124] attempt to access beyond end of device
[   43.106128] loop0: rw=0, want=277424, limit=277408
[   43.106131] Buffer I/O error on device loop0, logical block 138711
[   43.106135] attempt to access beyond end of device
[   43.106139] loop0: rw=0, want=277426, limit=277408
[   43.106143] Buffer I/O error on device loop0, logical block 138712
[   43.106147] attempt to access beyond end of device
[   43.106151] loop0: rw=0, want=277428, limit=277408
[   43.106154] Buffer I/O error on device loop0, logical block 138713
[   43.106158] attempt to access beyond end of device
[   43.106162] loop0: rw=0, want=277430, limit=277408
[   43.106166] attempt to access beyond end of device
[   43.106169] loop0: rw=0, want=277432, limit=277408
...
[   43.106307] attempt to access beyond end of device
[   43.106311] loop0: rw=0, want=277470, limit=2774

Squashfs manages to read in the end block(s) of the disk during the
mount operation.  Then, when dd reads the block device, it leads to
block_read_full_page being called with buffers that are beyond end of
disk, but are marked as mapped.  Thus, it would end up submitting read
I/O against them, resulting in the errors mentioned above.  I fixed the
problem by modifying init_page_buffers to only set the buffer mapped if
it fell inside of i_size.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>

--

Changes from v1->v2: re-used max_block, as suggested by Nick Piggin.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-05-11 16:42:14 +02:00
Jan Kara dbd5768f87 vfs: Rename end_writeback() to clear_inode()
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-05-06 13:43:41 +08:00
Muthu Kumar b502bd1152 magic.h: move some FS magic numbers into magic.h
- Move open-coded filesystem magic numbers into magic.h

- Rearrange magic.h so that the filesystem-related constants are grouped
  together.

Signed-off-by: Muthukumar R <muthur@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:31 -07:00
Konrad Rzeszutek Wilk 16c0cfa425 Merge branch 'stable/cleancache.v13' into linux-next
* stable/cleancache.v13:
  mm: cleancache: Use __read_mostly as appropiate.
  mm: cleancache: report statistics via debugfs instead of sysfs.
  mm: zcache/tmem/cleancache: s/flush/invalidate/
  mm: cleancache: s/flush/invalidate/
2012-03-19 12:12:19 -04:00
Jun'ichi Nomura fe316bf2d5 block: Fix NULL pointer dereference in sd_revalidate_disk
Since 2.6.39 (1196f8b), when a driver returns -ENOMEDIUM for open(),
__blkdev_get() calls rescan_partitions() to remove
in-kernel partition structures and raise KOBJ_CHANGE uevent.

However it ends up calling driver's revalidate_disk without open
and could cause oops.

In the case of SCSI:

  process A                  process B
  ----------------------------------------------
  sys_open
    __blkdev_get
      sd_open
        returns -ENOMEDIUM
                             scsi_remove_device
                               <scsi_device torn down>
      rescan_partitions
        sd_revalidate_disk
          <oops>
Oopses are reported here:
http://marc.info/?l=linux-scsi&m=132388619710052

This patch separates the partition invalidation from rescan_partitions()
and use it for -ENOMEDIUM case.

Reported-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-02 10:38:33 +01:00
Dan Magenheimer 3167760f83 mm: cleancache: s/flush/invalidate/
Per akpm suggestions alter the use of the term flush to be
invalidate. The next patch will do this across all MM.

This change is completely cosmetic.

[v9: akpm@linux-foundation.org: change "flush" to "invalidate", part 3]

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@novell.com>
Reviewed-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Rik Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[v10: Fixed  fs: move code out of buffer.c conflict change]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-23 16:06:24 -05:00
Andi Kleen 87192a2a49 vfs: cache request_queue in struct block_device
This makes it possible to get from the inode to the request_queue with one
less cache miss.  Used in followon optimization.

The livetime of the pointer is the same as the gendisk.

This assumes that the queue will always stay the same in the gendisk while
it's visible to block_devices.  I think that's safe correct?

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:12 -08:00
Sergey Senozhatsky ace8577aeb block_dev: Suppress bdev_cache_init() kmemleak warninig
Kmemleak reports the following warning in bdev_cache_init()
[    0.003738] kmemleak: Object 0xffff880153035200 (size 256):
[    0.003823] kmemleak:   comm "swapper/0", pid 0, jiffies 4294667299
[    0.003909] kmemleak:   min_count = 1
[    0.003988] kmemleak:   count = 0
[    0.004066] kmemleak:   flags = 0x1
[    0.004144] kmemleak:   checksum = 0
[    0.004224] kmemleak:   backtrace:
[    0.004303]      [<ffffffff814755ac>] kmemleak_alloc+0x21/0x3e
[    0.004446]      [<ffffffff811100ba>] kmem_cache_alloc+0xca/0x1dc
[    0.004592]      [<ffffffff811371b1>] alloc_vfsmnt+0x1f/0x198
[    0.004736]      [<ffffffff811375c5>] vfs_kern_mount+0x36/0xd2
[    0.004879]      [<ffffffff8113929a>] kern_mount_data+0x18/0x32
[    0.005025]      [<ffffffff81ab9075>] bdev_cache_init+0x51/0x81
[    0.005169]      [<ffffffff81ab8abf>] vfs_caches_init+0x101/0x10d
[    0.005313]      [<ffffffff81a9bae3>] start_kernel+0x344/0x383
[    0.005456]      [<ffffffff81a9b2a7>] x86_64_start_reservations+0xae/0xb2
[    0.005602]      [<ffffffff81a9b3ad>] x86_64_start_kernel+0x102/0x111
[    0.005747]      [<ffffffffffffffff>] 0xffffffffffffffff
[    0.008653] kmemleak: Trying to color unknown object at 0xffff880153035220 as Grey
[    0.008754] Pid: 0, comm: swapper/0 Not tainted 3.3.0-rc0-dbg-04200-g8180888-dirty #888
[    0.008856] Call Trace:
[    0.008934]  [<ffffffff81118704>] ? find_and_get_object+0x44/0x118
[    0.009023]  [<ffffffff81118fe6>] paint_ptr+0x57/0x8f
[    0.009109]  [<ffffffff81475935>] kmemleak_not_leak+0x23/0x42
[    0.009195]  [<ffffffff81ab9096>] bdev_cache_init+0x72/0x81
[    0.009282]  [<ffffffff81ab8abf>] vfs_caches_init+0x101/0x10d
[    0.009368]  [<ffffffff81a9bae3>] start_kernel+0x344/0x383
[    0.009466]  [<ffffffff81a9b2a7>] x86_64_start_reservations+0xae/0xb2
[    0.009555]  [<ffffffff81a9b140>] ? early_idt_handlers+0x140/0x140
[    0.009643]  [<ffffffff81a9b3ad>] x86_64_start_kernel+0x102/0x111

due to attempt to mark pointer to `struct vfsmount' as a gray object, which
is embedded into `struct mount' returned from alloc_vfsmnt().

Make `bd_mnt' static, avoiding need to tell kmemleak to mark it gray, as
suggested by Al Viro.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-10 13:08:55 -05:00
Al Viro ff01bb4832 fs: move code out of buffer.c
Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:07 -05:00
Al Viro 6b520e0565 vfs: fix the stupidity with i_dentry in inode destructors
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Al Viro f47ec3f283 trim fs/internal.h
some stuff in there can actually become static; some belongs to pnode.h
as it's a private interface between namespace.c and pnode.c...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:35 -05:00
Linus Torvalds 3d0a8d10cf Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-block
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits)
  virtio-blk: use ida to allocate disk index
  hpsa: add small delay when using PCI Power Management to reset for kump
  cciss: add small delay when using PCI Power Management to reset for kump
  xen/blkback: Fix two races in the handling of barrier requests.
  xen/blkback: Check for proper operation.
  xen/blkback: Fix the inhibition to map pages when discarding sector ranges.
  xen/blkback: Report VBD_WSECT (wr_sect) properly.
  xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
  xen-blkfront: plug device number leak in xlblk_init() error path
  xen-blkfront: If no barrier or flush is supported, use invalid operation.
  xen-blkback: use kzalloc() in favor of kmalloc()+memset()
  xen-blkback: fixed indentation and comments
  xen-blkfront: fix a deadlock while handling discard response
  xen-blkfront: Handle discard requests.
  xen-blkback: Implement discard requests ('feature-discard')
  xen-blkfront: add BLKIF_OP_DISCARD and discard request struct
  drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()
  drivers/block/loop.c: emit uevent on auto release
  drivers/block/cpqarray.c: use pci_dev->revision
  loop: always allow userspace partitions and optionally support automatic scanning
  ...

Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04 17:22:14 -07:00
Tejun Heo 523e1d399c block: make gendisk hold a reference to its queue
The following command sequence triggers an oops.

# mount /dev/sdb1 /mnt
# echo 1 > /sys/class/scsi_device/0\:0\:1\:0/device/delete
# umount /mnt

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 791, comm: umount Not tainted 3.1.0-rc3-work+ #8 Bochs Bochs
 RIP: 0010:[<ffffffff810d0879>]  [<ffffffff810d0879>] __lock_acquire+0x389/0x1d60
...
 Call Trace:
  [<ffffffff810d2845>] lock_acquire+0x95/0x140
  [<ffffffff81aed87b>] _raw_spin_lock+0x3b/0x50
  [<ffffffff811573bc>] bdi_lock_two+0x5c/0x70
  [<ffffffff811c2f6c>] bdev_inode_switch_bdi+0x4c/0xf0
  [<ffffffff811c3fcb>] __blkdev_put+0x11b/0x1d0
  [<ffffffff811c4010>] __blkdev_put+0x160/0x1d0
  [<ffffffff811c40df>] blkdev_put+0x5f/0x190
  [<ffffffff8118f18d>] kill_block_super+0x4d/0x80
  [<ffffffff8118f4a5>] deactivate_locked_super+0x45/0x70
  [<ffffffff8119003a>] deactivate_super+0x4a/0x70
  [<ffffffff811ac4ad>] mntput_no_expire+0xed/0x130
  [<ffffffff811acf2e>] sys_umount+0x7e/0x3a0
  [<ffffffff81aeeeab>] system_call_fastpath+0x16/0x1b

This is because bdev holds on to disk but disk doesn't pin the
associated queue.  If a SCSI device is removed while the device is
still open, the sdev puts the base reference to the queue on release.
When the bdev is finally released, the associated queue is already
gone along with the bdi and bdev_inode_switch_bdi() ends up
dereferencing already freed bdi.

Even if it were not for this bug, disk not holding onto the associated
queue is very unusual and error-prone.

Fix it by making add_disk() take an extra reference to its queue and
put it on disk_release() and ensuring that disk and its fops owner are
put in that order after all accesses to the disk and queue are
complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:07 +02:00
NeilBrown 94007751bb Avoid dereferencing a 'request_queue' after last close.
On the last close of an 'md' device which as been stopped, the device
is destroyed and in particular the request_queue is freed.  The free
is done in a separate thread so it might happen a short time later.

__blkdev_put calls bdev_inode_switch_bdi *after* ->release has been
called.

Since commit f758eeabeb
bdev_inode_switch_bdi will dereference the 'old' bdi, which lives
inside a request_queue, to get a spin lock.  This causes the last
close on an md device to sometime take a spin_lock which lives in
freed memory - which results in an oops.

So move the called to bdev_inode_switch_bdi before the call to
->release.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-10 17:20:21 +10:00
Tejun Heo d27769ec3d block: add GENHD_FL_NO_PART_SCAN
There are cases where suppressing partition scan is useful - e.g. for
lo devices and pseudo SATA devices which advertise to be a disk but
get upset on partition scan (some port multiplier control devices show
such behavior).

This patch adds GENHD_FL_NO_PART_SCAN which suppresses partition scan
regardless of the number of possible partitions.  disk_partitionable()
is renamed to disk_part_scan_enabled() as suppressing partition scan
doesn't imply the device can't be partitioned using
BLKPG_ADD/DEL_PARTITION calls from userland.  show_partition() now
directly tests disk_max_parts() to maintain backward-compatibility.

-v2: Updated to make it clear that only partition scan is suppressed
     not partitioning itself as suggested by Kay Sievers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23 20:01:04 +02:00
Rafael J. Wysocki da5aa861be fix block device fallout from ->fsync() changes
blkdev_fsync() needs to write pages in pagecache...

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-01 21:33:47 -04:00
Lachlan McIlroy 782b94cdf5 block: initialise bd_super in bdget()
bd_super is currently reset to NULL in kill_block_super() so we rely on previous
users of the block_device object to initialise this value for the next user.
This quirk was exposed on RHEL5 when a third party filesystem did not always use
kill_block_super() and therefore bd_super wasn't being reset when a block_device
object was recycled within the cache.  This may not be a problem upstream but
makes sense to be defensive.

Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-01 01:57:44 -04:00
Linus Torvalds f01ef569cd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/writeback: (27 commits)
  mm: properly reflect task dirty limits in dirty_exceeded logic
  writeback: don't busy retry writeback on new/freeing inodes
  writeback: scale IO chunk size up to half device bandwidth
  writeback: trace global_dirty_state
  writeback: introduce max-pause and pass-good dirty limits
  writeback: introduce smoothed global dirty limit
  writeback: consolidate variable names in balance_dirty_pages()
  writeback: show bdi write bandwidth in debugfs
  writeback: bdi write bandwidth estimation
  writeback: account per-bdi accumulated written pages
  writeback: make writeback_control.nr_to_write straight
  writeback: skip tmpfs early in balance_dirty_pages_ratelimited_nr()
  writeback: trace event writeback_queue_io
  writeback: trace event writeback_single_inode
  writeback: remove .nonblocking and .encountered_congestion
  writeback: remove writeback_control.more_io
  writeback: skip balance_dirty_pages() for in-memory fs
  writeback: add bdi_dirty_limit() kernel-doc
  writeback: avoid extra sync work at enqueue time
  writeback: elevate queue_io() into wb_writeback()
  ...

Fix up trivial conflicts in fs/fs-writeback.c and mm/filemap.c
2011-07-26 10:39:54 -07:00
Linus Torvalds 096a705bbc Merge branch 'for-3.1/core' of git://git.kernel.dk/linux-block
* 'for-3.1/core' of git://git.kernel.dk/linux-block: (24 commits)
  block: strict rq_affinity
  backing-dev: use synchronize_rcu_expedited instead of synchronize_rcu
  block: fix patch import error in max_discard_sectors check
  block: reorder request_queue to remove 64 bit alignment padding
  CFQ: add think time check for group
  CFQ: add think time check for service tree
  CFQ: move think time check variables to a separate struct
  fixlet: Remove fs_excl from struct task.
  cfq: Remove special treatment for metadata rqs.
  block: document blk_plug list access
  block: avoid building too big plug list
  compat_ioctl: fix make headers_check regression
  block: eliminate potential for infinite loop in blkdev_issue_discard
  compat_ioctl: fix warning caused by qemu
  block: flush MEDIA_CHANGE from drivers on close(2)
  blk-throttle: Make total_nr_queued unsigned
  block: Add __attribute__((format(printf...) and fix fallout
  fs/partitions/check.c: make local symbols static
  block:remove some spare spaces in genhd.c
  block:fix the comment error in blkdev.h
  ...
2011-07-25 10:33:36 -07:00
Josef Bacik 02c24a8218 fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:59 -04:00