Граф коммитов

14 Коммитов

Автор SHA1 Сообщение Дата
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Kirill Tkhai 0aa1125fa8 locking/rwsem-spinlock: Add killable versions of __down_read()
Rename __down_read() in __down_read_common() and teach it
to abort waiting in case of pending signals and killable
state argument passed.

Note, that we shouldn't wake anybody up in EINTR path, as:

We check for signal_pending_state() after (!waiter.task)
test and under spinlock. So, current task wasn't able to
be woken up. It may be in two cases: a writer is owner
of the sem, or a writer is a first waiter of the sem.

If a writer is owner of the sem, no one else may work
with it in parallel. It will wake somebody, when it
call up_write() or downgrade_write().

If a writer is the first waiter, it will be woken up,
when the last active reader releases the sem, and
sem->count became 0.

Also note, that set_current_state() may be moved down
to schedule() (after !waiter.task check), as all
assignments in this type of semaphore (including wake_up),
occur under spinlock, so we can't miss anything.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: avagin@virtuozzo.com
Cc: davem@davemloft.net
Cc: fenghua.yu@intel.com
Cc: gorcunov@virtuozzo.com
Cc: heiko.carstens@de.ibm.com
Cc: hpa@zytor.com
Cc: ink@jurassic.park.msu.ru
Cc: mattst88@gmail.com
Cc: rth@twiddle.net
Cc: schwidefsky@de.ibm.com
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/149789533283.9059.9829416940494747182.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10 12:28:55 +02:00
Kirill Tkhai a0c4acd2c2 locking/rwsem-spinlock: Fix EINTR branch in __down_write_common()
If a writer could been woken up, the above branch

	if (sem->count == 0)
		break;

would have moved us to taking the sem. So, it's
not the time to wake a writer now, and only readers
are allowed now. Thus, 0 must be passed to __rwsem_do_wake().

Next, __rwsem_do_wake() wakes readers unconditionally.
But we mustn't do that if the sem is owned by writer
in the moment. Otherwise, writer and reader own the sem
the same time, which leads to memory corruption in
callers.

rwsem-xadd.c does not need that, as:

  1) the similar check is made lockless there,
  2) in __rwsem_mark_wake::try_reader_grant we test,

that sem is not owned by writer.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 17fcbd590d "locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y"
Link: http://lkml.kernel.org/r/149762063282.19811.9129615532201147826.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 12:26:29 +02:00
Niklas Cassel 17fcbd590d locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y
We hang if SIGKILL has been sent, but the task is stuck in down_read()
(after do_exit()), even though no task is doing down_write() on the
rwsem in question:

  INFO: task libupnp:21868 blocked for more than 120 seconds.
  libupnp         D    0 21868      1 0x08100008
  ...
  Call Trace:
  __schedule()
  schedule()
  __down_read()
  do_exit()
  do_group_exit()
  __wake_up_parent()

This bug has already been fixed for CONFIG_RWSEM_XCHGADD_ALGORITHM=y in
the following commit:

 04cafed7fc ("locking/rwsem: Fix down_write_killable()")

... however, this bug also exists for CONFIG_RWSEM_GENERIC_SPINLOCK=y.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Niklas Cassel <niklass@axis.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d47996082f ("locking/rwsem: Introduce basis for down_write_killable()")
Link: http://lkml.kernel.org/r/1487981873-12649-1-git-send-email-niklass@axis.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-16 09:28:30 +01:00
Ingo Molnar b17b01533b sched/headers: Prepare for new header dependencies before moving code to <linux/sched/debug.h>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:34 +01:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Davidlohr Bueso 642fa448ae sched/core: Remove set_task_state()
This is a nasty interface and setting the state of a foreign task must
not be done. As of the following commit:

  be628be095 ("bcache: Make gc wakeup sane, remove set_task_state()")

... everyone in the kernel calls set_task_state() with current, allowing
the helper to be removed.

However, as the comment indicates, it is still around for those archs
where computing current is more expensive than using a pointer, at least
in theory. An important arch that is affected is arm64, however this has
been addressed now [1] and performance is up to par making no difference
with either calls.

Of all the callers, if any, it's the locking bits that would care most
about this -- ie: we end up passing a tsk pointer to a lot of the lock
slowpath, and setting ->state on that. The following numbers are based
on two tests: a custom ad-hoc microbenchmark that just measures
latencies (for ~65 million calls) between get_task_state() vs
get_current_state().

Secondly for a higher overview, an unlink microbenchmark was used,
which pounds on a single file with open, close,unlink combos with
increasing thread counts (up to 4x ncpus). While the workload is quite
unrealistic, it does contend a lot on the inode mutex or now rwsem.

[1] https://lkml.kernel.org/r/1483468021-8237-1-git-send-email-mark.rutland@arm.com

== 1. x86-64 ==

Avg runtime set_task_state():    601 msecs
Avg runtime set_current_state(): 552 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      36089.26 (  0.00%)    38977.33 (  8.00%)
Hmean    unlink1-processes-5      28555.01 (  0.00%)    29832.55 (  4.28%)
Hmean    unlink1-processes-8      37323.75 (  0.00%)    44974.57 ( 20.50%)
Hmean    unlink1-processes-12     43571.88 (  0.00%)    44283.01 (  1.63%)
Hmean    unlink1-processes-21     34431.52 (  0.00%)    38284.45 ( 11.19%)
Hmean    unlink1-processes-30     34813.26 (  0.00%)    37975.17 (  9.08%)
Hmean    unlink1-processes-48     37048.90 (  0.00%)    39862.78 (  7.59%)
Hmean    unlink1-processes-79     35630.01 (  0.00%)    36855.30 (  3.44%)
Hmean    unlink1-processes-110    36115.85 (  0.00%)    39843.91 ( 10.32%)
Hmean    unlink1-processes-141    32546.96 (  0.00%)    35418.52 (  8.82%)
Hmean    unlink1-processes-172    34674.79 (  0.00%)    36899.21 (  6.42%)
Hmean    unlink1-processes-203    37303.11 (  0.00%)    36393.04 ( -2.44%)
Hmean    unlink1-processes-224    35712.13 (  0.00%)    36685.96 (  2.73%)

== 2. ppc64le ==

Avg runtime set_task_state():  938 msecs
Avg runtime set_current_state: 940 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      19269.19 (  0.00%)    30704.50 ( 59.35%)
Hmean    unlink1-processes-5      20106.15 (  0.00%)    21804.15 (  8.45%)
Hmean    unlink1-processes-8      17496.97 (  0.00%)    17243.28 ( -1.45%)
Hmean    unlink1-processes-12     14224.15 (  0.00%)    17240.21 ( 21.20%)
Hmean    unlink1-processes-21     14155.66 (  0.00%)    15681.23 ( 10.78%)
Hmean    unlink1-processes-30     14450.70 (  0.00%)    15995.83 ( 10.69%)
Hmean    unlink1-processes-48     16945.57 (  0.00%)    16370.42 ( -3.39%)
Hmean    unlink1-processes-79     15788.39 (  0.00%)    14639.27 ( -7.28%)
Hmean    unlink1-processes-110    14268.48 (  0.00%)    14377.40 (  0.76%)
Hmean    unlink1-processes-141    14023.65 (  0.00%)    16271.69 ( 16.03%)
Hmean    unlink1-processes-172    13417.62 (  0.00%)    16067.55 ( 19.75%)
Hmean    unlink1-processes-203    15293.08 (  0.00%)    15440.40 (  0.96%)
Hmean    unlink1-processes-234    13719.32 (  0.00%)    16190.74 ( 18.01%)
Hmean    unlink1-processes-265    16400.97 (  0.00%)    16115.22 ( -1.74%)
Hmean    unlink1-processes-296    14388.60 (  0.00%)    16216.13 ( 12.70%)
Hmean    unlink1-processes-320    15771.85 (  0.00%)    15905.96 (  0.85%)

x86-64 (known to be fast for get_current()/this_cpu_read_stable() caching)
and ppc64 (with paca) show similar improvements in the unlink microbenches.
The small delta for ppc64 (2ms), does not represent the gains on the unlink
runs. In the case of x86, there was a decent amount of variation in the
latency runs, but always within a 20 to 50ms increase), ppc was more constant.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: mark.rutland@arm.com
Link: http://lkml.kernel.org/r/1483479794-14013-5-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14 11:14:16 +01:00
Davidlohr Bueso d269a8b8c5 kernel/locking: Compute 'current' directly
This patch effectively replaces the tsk pointer dereference
(which is obviously == current), to directly use get_current()
macro. This is to make the removal of setting foreign task
states smoother and painfully obvious. Performance win on some
archs such as x86-64 and ppc64. On a microbenchmark that calls
set_task_state() vs set_current_state() and an inode rwsem
pounding benchmark doing unlink:

== 1. x86-64 ==

Avg runtime set_task_state():    601 msecs
Avg runtime set_current_state(): 552 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      36089.26 (  0.00%)    38977.33 (  8.00%)
Hmean    unlink1-processes-5      28555.01 (  0.00%)    29832.55 (  4.28%)
Hmean    unlink1-processes-8      37323.75 (  0.00%)    44974.57 ( 20.50%)
Hmean    unlink1-processes-12     43571.88 (  0.00%)    44283.01 (  1.63%)
Hmean    unlink1-processes-21     34431.52 (  0.00%)    38284.45 ( 11.19%)
Hmean    unlink1-processes-30     34813.26 (  0.00%)    37975.17 (  9.08%)
Hmean    unlink1-processes-48     37048.90 (  0.00%)    39862.78 (  7.59%)
Hmean    unlink1-processes-79     35630.01 (  0.00%)    36855.30 (  3.44%)
Hmean    unlink1-processes-110    36115.85 (  0.00%)    39843.91 ( 10.32%)
Hmean    unlink1-processes-141    32546.96 (  0.00%)    35418.52 (  8.82%)
Hmean    unlink1-processes-172    34674.79 (  0.00%)    36899.21 (  6.42%)
Hmean    unlink1-processes-203    37303.11 (  0.00%)    36393.04 ( -2.44%)
Hmean    unlink1-processes-224    35712.13 (  0.00%)    36685.96 (  2.73%)

== 2. ppc64le ==

Avg runtime set_task_state():  938 msecs
Avg runtime set_current_state: 940 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      19269.19 (  0.00%)    30704.50 ( 59.35%)
Hmean    unlink1-processes-5      20106.15 (  0.00%)    21804.15 (  8.45%)
Hmean    unlink1-processes-8      17496.97 (  0.00%)    17243.28 ( -1.45%)
Hmean    unlink1-processes-12     14224.15 (  0.00%)    17240.21 ( 21.20%)
Hmean    unlink1-processes-21     14155.66 (  0.00%)    15681.23 ( 10.78%)
Hmean    unlink1-processes-30     14450.70 (  0.00%)    15995.83 ( 10.69%)
Hmean    unlink1-processes-48     16945.57 (  0.00%)    16370.42 ( -3.39%)
Hmean    unlink1-processes-79     15788.39 (  0.00%)    14639.27 ( -7.28%)
Hmean    unlink1-processes-110    14268.48 (  0.00%)    14377.40 (  0.76%)
Hmean    unlink1-processes-141    14023.65 (  0.00%)    16271.69 ( 16.03%)
Hmean    unlink1-processes-172    13417.62 (  0.00%)    16067.55 ( 19.75%)
Hmean    unlink1-processes-203    15293.08 (  0.00%)    15440.40 (  0.96%)
Hmean    unlink1-processes-234    13719.32 (  0.00%)    16190.74 ( 18.01%)
Hmean    unlink1-processes-265    16400.97 (  0.00%)    16115.22 ( -1.74%)
Hmean    unlink1-processes-296    14388.60 (  0.00%)    16216.13 ( 12.70%)
Hmean    unlink1-processes-320    15771.85 (  0.00%)    15905.96 (  0.85%)

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: mark.rutland@arm.com
Link: http://lkml.kernel.org/r/1483479794-14013-4-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14 11:14:14 +01:00
Michal Hocko d47996082f locking/rwsem: Introduce basis for down_write_killable()
Introduce a generic implementation necessary for down_write_killable().

This is a trivial extension of the already existing down_write() call
which can be interrupted by SIGKILL.  This patch doesn't provide
down_write_killable() yet because arches have to provide the necessary
pieces before.

rwsem_down_write_failed() which is a generic slow path for the
write lock is extended to take a task state and renamed to
__rwsem_down_write_failed_common(). The return value is either a valid
semaphore pointer or ERR_PTR(-EINTR).

rwsem_down_write_failed_killable() is exported as a new way to wait for
the lock and be killable.

For rwsem-spinlock implementation the current __down_write() it updated
in a similar way as __rwsem_down_write_failed_common() except it doesn't
need new exports just visible __down_write_killable().

Architectures which are not using the generic rwsem implementation are
supposed to provide their __down_write_killable() implementation and
use rwsem_down_write_failed_killable() for the slow path.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-7-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-13 10:42:20 +02:00
Michal Hocko f8e04d8545 locking/rwsem: Get rid of __down_write_nested()
This is no longer used anywhere and all callers (__down_write()) use
0 as a subclass. Ditch __down_write_nested() to make the code easier
to follow.

This shouldn't introduce any functional change.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Signed-off-by: Jason Low <jason.low2@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1460041951-22347-2-git-send-email-mhocko@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-13 10:42:16 +02:00
Davidlohr Bueso 49e4b2bcf7 locking/rwsem: Document barrier need when waking tasks
The need for the smp_mb() in __rwsem_do_wake() should be
properly documented. Applies to both xadd and spinlock
variants.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1422609267-15102-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18 16:57:10 +01:00
Davidlohr Bueso 73105994c5 locking/rwsem: Use task->state helpers
Call __set_task_state() instead of assigning the new state
directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP
environments, keeping track of who last changed the state.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422257769-14083-2-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-04 07:57:39 +01:00
Peter Zijlstra 13b9a962a2 locking/rwsem: Rename 'activity' to 'count'
There are two definitions of struct rw_semaphore, one in linux/rwsem.h
and one in linux/rwsem-spinlock.h.

For some reason they have different names for the initial field. This
makes it impossible to use C99 named initialization for
__RWSEM_INITIALIZER() -- or we have to duplicate that entire thing
along with the structure definitions.

The simpler patch is renaming the rwsem-spinlock variant to match the
regular rwsem.

This allows us to switch to C99 named initialization.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bmrZolsbGmautmzrerog27io@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16 14:56:55 +02:00
Peter Zijlstra ed428bfc3c locking: Move the rwsem code to kernel/locking/
Notably: changed lib/rwsem* targets from lib- to obj-, no idea about
the ramifications of that.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-g0kynfh5feriwc6p3h6kpbw6@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-06 09:24:18 +01:00