[ Upstream commit 6f855b39e4 ]
The DYING/STARTING callbacks are not expected to fail. However, as reported
by Derek, buggy drivers such as tboot are still free to return errors
within those sections, which halts the hot(un)plug and leaves the CPU in an
unrecoverable state.
As there is no rollback possible, only log the failures and proceed with
the following steps.
This restores the hotplug behaviour prior to commit 453e410851
("cpu/hotplug: Add cpuhp_invoke_callback_range()")
Fixes: 453e410851 ("cpu/hotplug: Add cpuhp_invoke_callback_range()")
Reported-by: Derek Dolney <z23@posteo.net>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Derek Dolney <z23@posteo.net>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215867
Link: https://lore.kernel.org/r/20220927101259.1149636-1-vdonnefort@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64ea6e44f8 ]
Writing the current state back in hotplug/target calls cpu_down()
which will set cpu dying even when it isn't and then nothing will
ever clear it. A stress test that reads values and writes them back
for all cpu device files in sysfs will trigger the BUG() in
select_fallback_rq once all cpus are marked as dying.
kernel/cpu.c::target_store()
...
if (st->state < target)
ret = cpu_up(dev->id, target);
else
ret = cpu_down(dev->id, target);
cpu_down() -> cpu_set_state()
bool bringup = st->state < target;
...
if (cpu_dying(cpu) != !bringup)
set_cpu_dying(cpu, !bringup);
Fix this by letting state==target fall through in the target_store()
conditional. Also make sure st->target == target in that case.
Fixes: 757c989b99 ("cpu/hotplug: Make target state writeable")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20221117162329.3164999-2-pauld@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3191dd5a11 upstream.
For the irq randomness fast pool, rather than having to use expensive
atomics, which were visibly the most expensive thing in the entire irq
handler, simply take care of the extreme edge case of resetting count to
zero in the cpuhp online handler, just after workqueues have been
reenabled. This simplifies the code a bit and lets us use vanilla
variables rather than atomics, and performance should be improved.
As well, very early on when the CPU comes up, while interrupts are still
disabled, we clear out the per-cpu crng and its batches, so that it
always starts with fresh randomness.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7ba6d8dc3 upstream.
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in
cpuhp_create() is too late as it is used earlier in _cpu_up().
If kzalloc_node() in __smpboot_create_thread() fails then the rollback will
be done with st->cpu==0 causing CPU0 to be erroneously set to be dying,
causing the scheduler to get mightily confused and throw its toys out of
the pram.
However the cpu number is actually available directly, so simply remove
the 'cpu' member and avoid the problem in the first place.
Fixes: 2ea46c6fc9 ("cpumask/hotplug: Fix cpu_dying() state tracking")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220411152233.474129-2-steven.price@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dce1ca0525 ]
To hot unplug a CPU, the idle task on that CPU calls a few layers of C
code before finally leaving the kernel. When KASAN is in use, poisoned
shadow is left around for each of the active stack frames, and when
shadow call stacks are in use. When shadow call stacks (SCS) are in use
the task's saved SCS SP is left pointing at an arbitrary point within
the task's shadow call stack.
When a CPU is offlined than onlined back into the kernel, this stale
state can adversely affect execution. Stale KASAN shadow can alias new
stackframes and result in bogus KASAN warnings. A stale SCS SP is
effectively a memory leak, and prevents a portion of the shadow call
stack being used. Across a number of hotplug cycles the idle task's
entire shadow call stack can become unusable.
We previously fixed the KASAN issue in commit:
e1b77c9298 ("sched/kasan: remove stale KASAN poison after hotplug")
... by removing any stale KASAN stack poison immediately prior to
onlining a CPU.
Subsequently in commit:
f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
... the refactoring left the KASAN and SCS cleanup in one-time idle
thread initialization code rather than something invoked prior to each
CPU being onlined, breaking both as above.
We fixed SCS (but not KASAN) in commit:
63acd42c0d ("sched/scs: Reset the shadow stack when idle_task_exit")
... but as this runs in the context of the idle task being offlined it's
potentially fragile.
To fix these consistently and more robustly, reset the SCS SP and KASAN
shadow of a CPU's idle task immediately before we online that CPU in
bringup_cpu(). This ensures the idle task always has a consistent state
when it is running, and removes the need to so so when exiting an idle
task.
Whenever any thread is created, dup_task_struct() will give the task a
stack which is free of KASAN shadow, and initialize the task's SCS SP,
so there's no need to specially initialize either for idle thread within
init_idle(), as this was only necessary to handle hotplug cycles.
I've tested this on arm64 with:
* gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK
* clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK
... offlining and onlining CPUS with:
| while true; do
| for C in /sys/devices/system/cpu/cpu*/online; do
| echo 0 > $C;
| echo 1 > $C;
| done
| done
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Link: https://lore.kernel.org/lkml/20211115113310.35693-1-mark.rutland@arm.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
CPU hotplug callbacks can fail and cause a rollback to the previous
state. These failures are silent and therefore hard to debug.
Add pr_debug() to the up and down paths which provide information about the
error code, the CPU and the failed state. The debug printks can be enabled
via kernel command line or sysfs.
[ tglx: Adopt to current mainline, massage printk and changelog ]
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lore.kernel.org/r/20210409055316.1709-1-dongli.zhang@oracle.com
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210527141105.2312-1-yuehaibing@huawei.com
kernel/cpu.c:57: warning: cannot understand function prototype: 'struct cpuhp_cpu_state '
kernel/cpu.c:115: warning: cannot understand function prototype: 'struct cpuhp_step '
kernel/cpu.c:146: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* cpuhp_invoke_callback _ Invoke the callbacks for a given state
kernel/cpu.c:75: warning: Function parameter or member 'fail' not described in 'cpuhp_cpu_state'
kernel/cpu.c:75: warning: Function parameter or member 'cpu' not described in 'cpuhp_cpu_state'
kernel/cpu.c:75: warning: Function parameter or member 'node' not described in 'cpuhp_cpu_state'
kernel/cpu.c:75: warning: Function parameter or member 'last' not described in 'cpuhp_cpu_state'
kernel/cpu.c:130: warning: Function parameter or member 'list' not described in 'cpuhp_step'
kernel/cpu.c:130: warning: Function parameter or member 'multi_instance' not described in 'cpuhp_step'
kernel/cpu.c:158: warning: No description found for return value of 'cpuhp_invoke_callback'
kernel/cpu.c:1188: warning: No description found for return value of 'cpu_device_down'
kernel/cpu.c:1400: warning: No description found for return value of 'cpu_device_up'
kernel/cpu.c:1425: warning: No description found for return value of 'bringup_hibernate_cpu'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210809223825.24512-1-rdunlap@infradead.org
Fixes the following W=1 kernel build warning(s):
kernel/cpu.c:1949: warning: Function parameter or member
'name' not described in '__cpuhp_setup_state_cpuslocked'
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210605063003.681049-1-libaokun1@huawei.com
cpusets delegate the hotplug work to a workqueue to prevent a lock order
inversion vs. the CPU hotplug lock. The work is not flushed before the
hotplug operation returns which creates user visible inconsistent state.
Prevent this by flushing the work after dropping CPU hotplug lock and
before releasing the outer mutex which serializes the CPU hotplug related
sysfs interface operations.
-----BEGIN PGP SIGNATURE-----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=Lzoh
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Thomas Gleixner:
"A fix for the CPU hotplug and cpusets interaction:
cpusets delegate the hotplug work to a workqueue to prevent a lock
order inversion vs. the CPU hotplug lock. The work is not flushed
before the hotplug operation returns which creates user visible
inconsistent state. Prevent this by flushing the work after dropping
CPU hotplug lock and before releasing the outer mutex which serializes
the CPU hotplug related sysfs interface operations"
* tag 'smp-urgent-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Cure the cpusets trainwreck
Alexey and Joshua tried to solve a cpusets related hotplug problem which is
user space visible and results in unexpected behaviour for some time after
a CPU has been plugged in and the corresponding uevent was delivered.
cpusets delegate the hotplug work (rebuilding cpumasks etc.) to a
workqueue. This is done because the cpusets code has already a lock
nesting of cgroups_mutex -> cpu_hotplug_lock. A synchronous callback or
waiting for the work to finish with cpu_hotplug_lock held can and will
deadlock because that results in the reverse lock order.
As a consequence the uevent can be delivered before cpusets have consistent
state which means that a user space invocation of sched_setaffinity() to
move a task to the plugged CPU fails up to the point where the scheduled
work has been processed.
The same is true for CPU unplug, but that does not create user observable
failure (yet).
It's still inconsistent to claim that an operation is finished before it
actually is and that's the real issue at hand. uevents just make it
reliably observable.
Obviously the problem should be fixed in cpusets/cgroups, but untangling
that is pretty much impossible because according to the changelog of the
commit which introduced this 8 years ago:
3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")
the lock order cgroups_mutex -> cpu_hotplug_lock is a design decision and
the whole code is built around that.
So bite the bullet and invoke the relevant cpuset function, which waits for
the work to finish, in _cpu_up/down() after dropping cpu_hotplug_lock and
only when tasks are not frozen by suspend/hibernate because that would
obviously wait forever.
Waiting there with cpu_add_remove_lock, which is protecting the present
and possible CPU maps, held is not a problem at all because neither work
queues nor cpusets/cgroups have any lockchains related to that lock.
Waiting in the hotplug machinery is not problematic either because there
are already state callbacks which wait for hardware queues to drain. It
makes the operations slightly slower, but hotplug is slow anyway.
This ensures that state is consistent before returning from a hotplug
up/down operation. It's still inconsistent during the operation, but that's
a different story.
Add a large comment which explains why this is done and why this is not a
dump ground for the hack of the day to work around half thought out locking
schemes. Document also the implications vs. hotplug operations and
serialization or the lack of it.
Thanks to Alexy and Joshua for analyzing why this temporary
sched_setaffinity() failure happened.
Fixes: 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside get_online_cpus()")
Reported-by: Alexey Klimov <aklimov@redhat.com>
Reported-by: Joshua Baker <jobaker@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <aklimov@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuowcnv3.ffs@nanos.tec.linutronix.de
It is unnecessary to invoke per_cpu_ptr() everytime to access cpuhp_state.
Use the available pointer instead.
Signed-off-by: Yuan ZhaoXiong <yuanzhaoxiong@baidu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/1621776690-13264-1-git-send-email-yuanzhaoxiong@baidu.com
Vincent reported that for states with a NULL startup/teardown function
we do not call cpuhp_invoke_callback() (because there is none) and as
such we'll not update the cpu_dying() state.
The stale cpu_dying() can eventually lead to triggering BUG().
Rectify this by updating cpu_dying() in the exact same places the
hotplug machinery tracks its directional state, namely
cpuhp_set_state() and cpuhp_reset_state().
Reported-by: Vincent Donnefort <vincent.donnefort@arm.com>
Suggested-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/YH7r+AoQEReSvxBI@hirez.programming.kicks-ass.net
Introduce a cpumask that indicates (for each CPU) what direction the
CPU hotplug is currently going. Notably, it tracks rollbacks. Eg. when
an up fails and we do a roll-back down, it will accurately reflect the
direction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210310150109.151441252@infradead.org
Factorizing and unifying cpuhp callback range invocations, especially for
the hotunplug path, where two different ways of decrementing were used. The
first one, decrements before the callback is called:
cpuhp_thread_fun()
state = st->state;
st->state--;
cpuhp_invoke_callback(state);
The second one, after:
take_down_cpu()|cpuhp_down_callbacks()
cpuhp_invoke_callback(st->state);
st->state--;
This is problematic for rolling back the steps in case of error, as
depending on the decrement, the rollback will start from N or N-1. It also
makes tracing inconsistent, between steps run in the cpuhp thread and
the others.
Additionally, avoid useless cpuhp_thread_fun() loops by skipping empty
steps.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210216103506.416286-4-vincent.donnefort@arm.com
The atomic states (between CPUHP_AP_IDLE_DEAD and CPUHP_AP_ONLINE) are
triggered by the CPUHP_BRINGUP_CPU step. If the latter fails, no atomic
state can be rolled back.
DEAD callbacks too can't fail and disallow recovery. As a consequence,
during hotunplug, the fail injection interface should prohibit all states
from CPUHP_BRINGUP_CPU to CPUHP_ONLINE.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210216103506.416286-3-vincent.donnefort@arm.com
Currently, the only way of resetting the fail injection is to trigger a
hotplug, hotunplug or both. This is rather annoying for testing
and, as the default value for this file is -1, it seems pretty natural to
let a user write it.
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210216103506.416286-2-vincent.donnefort@arm.com
This commit adds a lockdep_is_cpus_held() function to verify that the
proper locks are held and that various operations are running in the
correct context.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
- migrate_disable/enable() support which originates from the RT tree and
is now a prerequisite for the new preemptible kmap_local() API which aims
to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=Oz1V
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- migrate_disable/enable() support which originates from the RT tree
and is now a prerequisite for the new preemptible kmap_local() API
which aims to replace kmap_atomic().
- A fair amount of topology and NUMA related improvements
- Improvements for the frequency invariant calculations
- Enhanced robustness for the global CPU priority tracking and decision
making
- The usual small fixes and enhancements all over the place
* tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
sched/fair: Trivial correction of the newidle_balance() comment
sched/fair: Clear SMT siblings after determining the core is not idle
sched: Fix kernel-doc markup
x86: Print ratio freq_max/freq_base used in frequency invariance calculations
x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC
x86, sched: Calculate frequency invariance for AMD systems
irq_work: Optimize irq_work_single()
smp: Cleanup smp_call_function*()
irq_work: Cleanup
sched: Limit the amount of NUMA imbalance that can exist at fork time
sched/numa: Allow a floating imbalance between NUMA nodes
sched: Avoid unnecessary calculation of load imbalance at clone time
sched/numa: Rename nr_running and break out the magic number
sched: Make migrate_disable/enable() independent of RT
sched/topology: Condition EAS enablement on FIE support
arm64: Rebuild sched domains on invariance status changes
sched/topology,schedutil: Wrap sched domains rebuild
sched/uclamp: Allow to reset a task uclamp constraint value
sched/core: Fix typos in comments
Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug
...
powerpc/64s keeps a counter in the mm which counts bits set in
mm_cpumask as well as other things. This means it can't use generic code
to clear bits out of the mask and doesn't adjust the arch specific
counter.
Add an arch override that allows powerpc/64s to use
clear_tasks_mm_cpumask().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-4-npiggin@gmail.com
With the new mechanism which kicks tasks off the outgoing CPU at the end of
schedule() the situation on an outgoing CPU right before the stopper thread
brings it down completely is:
- All user tasks and all unbound kernel threads have either been migrated
away or are not running and the next wakeup will move them to a online CPU.
- All per CPU kernel threads, except cpu hotplug thread and the stopper
thread have either been unbound or parked by the responsible CPU hotplug
callback.
That means that at the last step before the stopper thread is invoked the
cpu hotplug thread is the last legitimate running task on the outgoing
CPU.
Add a final wait step right before the stopper thread is kicked which
ensures that any still running tasks on the way to park or on the way to
kick themself of the CPU are either sleeping or gone.
This allows to remove the migrate_tasks() crutch in sched_cpu_dying(). If
sched_cpu_dying() detects that there is still another running task aside of
the stopper thread then it will explode with the appropriate fireworks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102346.547163969@infradead.org
- Optimize the task wakeup CPU selection logic, to improve scalability and
reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=C2OP
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The changes in this cycle are:
- Optimize the task wakeup CPU selection logic, to improve
scalability and reduce wakeup latency spikes
- PELT enhancements
- CFS bandwidth handling fixes
- Optimize the wakeup path by remove rq->wake_list and replacing it
with ->ttwu_pending
- Optimize IPI cross-calls by making flush_smp_call_function_queue()
process sync callbacks first.
- Misc fixes and enhancements"
* tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too
sched/headers: Split out open-coded prototypes into kernel/sched/smp.h
sched: Replace rq::wake_list
sched: Add rq::ttwu_pending
irq_work, smp: Allow irq_work on call_single_queue
smp: Optimize send_call_function_single_ipi()
smp: Move irq_work_run() out of flush_smp_call_function_queue()
smp: Optimize flush_smp_call_function_queue()
sched: Fix smp_call_function_single_async() usage for ILB
sched/core: Offload wakee task activation if it the wakee is descheduling
sched/core: Optimize ttwu() spinning on p->on_cpu
sched: Defend cfs and rt bandwidth quota against overflow
sched/cpuacct: Fix charge cpuacct.usage_sys
sched/fair: Replace zero-length array with flexible-array
sched/pelt: Sync util/runnable_sum with PELT window when propagating
sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr()
sched/fair: Optimize enqueue_task_fair()
sched: Make scheduler_ipi inline
sched: Clean up scheduler_ipi()
sched/core: Simplify sched_init()
...
The refactored function is no longer required as the codepaths that call
freeze_secondary_cpus() are all suspend/resume related now.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lkml.kernel.org/r/20200430114004.17477-2-qais.yousef@arm.com
The single user could have called freeze_secondary_cpus() directly.
Since this function was a source of confusion, remove it as it's
just a pointless wrapper.
While at it, rename enable_nonboot_cpus() to thaw_secondary_cpus() to
preserve the naming symmetry.
Done automatically via:
git grep -l enable_nonboot_cpus | xargs sed -i 's/enable_nonboot_cpus/thaw_secondary_cpus/g'
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lkml.kernel.org/r/20200430114004.17477-1-qais.yousef@arm.com
In the CPU-offline process, it calls mmdrop() after idle entry and the
subsequent call to cpuhp_report_idle_dead(). Once execution passes the
call to rcu_report_dead(), RCU is ignoring the CPU, which results in
lockdep complaining when mmdrop() uses RCU from either memcg or
debugobjects below.
Fix it by cleaning up the active_mm state from BP instead. Every arch
which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit()
from AP. The only exception is parisc because it switches them to
&init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()),
but the patch will still work there because it calls mmgrab(&init_mm) in
smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().
WARNING: suspicious RCU usage
-----------------------------
kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!
other info that might help us debug this:
RCU used illegally from offline CPU!
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
lockdep_rcu_suspicious+0x140/0x164
get_work_pool+0x110/0x150
__queue_work+0x1bc/0xca0
queue_work_on+0x114/0x120
css_release+0x9c/0xc0
percpu_ref_put_many+0x204/0x230
free_pcp_prepare+0x264/0x570
free_unref_page+0x38/0xf0
__mmdrop+0x21c/0x2c0
idle_task_exit+0x170/0x1b0
pnv_smp_cpu_kill_self+0x38/0x2e0
cpu_die+0x48/0x64
arch_cpu_idle_dead+0x30/0x50
do_idle+0x2f4/0x470
cpu_startup_entry+0x38/0x40
start_secondary+0x7a8/0xa80
start_secondary_resume+0x10/0x14
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low level
functions cpu_up/down() are now confined to the core code and not
longer accessible from random code.
-----BEGIN PGP SIGNATURE-----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=jwCg
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core SMP updates from Thomas Gleixner:
"CPU (hotplug) updates:
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low
level functions cpu_up/down() are now confined to the core code and
not longer accessible from random code"
* tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()
cpu/hotplug: Hide cpu_up/down()
cpu/hotplug: Move bringup of secondary CPUs out of smp_init()
torture: Replace cpu_up/down() with add/remove_cpu()
firmware: psci: Replace cpu_up/down() with add/remove_cpu()
xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()
parisc: Replace cpu_up/down() with add/remove_cpu()
sparc: Replace cpu_up/down() with add/remove_cpu()
powerpc: Replace cpu_up/down() with add/remove_cpu()
x86/smp: Replace cpu_up/down() with add/remove_cpu()
arm64: hibernate: Use bringup_hibernate_cpu()
cpu/hotplug: Provide bringup_hibernate_cpu()
arm64: Use reboot_cpu instead of hardconding it to 0
arm64: Don't use disable_nonboot_cpus()
ARM: Use reboot_cpu instead of hardcoding it to 0
ARM: Don't use disable_nonboot_cpus()
ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()
cpu/hotplug: Create a new function to shutdown nonboot cpus
cpu/hotplug: Add new {add,remove}_cpu() functions
sched/core: Remove rq.hrtick_csd_pending
...
A recent change to freeze_secondary_cpus() which added an early abort if a
wakeup is pending missed the fact that the function is also invoked for
shutdown, reboot and kexec via disable_nonboot_cpus().
In case of disable_nonboot_cpus() the wakeup event needs to be ignored as
the purpose is to terminate the currently running kernel.
Add a 'suspend' argument which is only set when the freeze is in context of
a suspend operation. If not set then an eventually pending wakeup event is
ignored.
Fixes: a66d955e91 ("cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending")
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/874kuaxdiz.fsf@nanos.tec.linutronix.de
Use separate functions for the device core to bring a CPU up and down.
Users outside the device core must use add/remove_cpu() which will take
care of extra housekeeping work like keeping sysfs in sync.
Make cpu_up/down() static and replace the extra layer of indirection.
[ tglx: Removed the extra wrapper functions and adjusted function names ]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323135110.30522-18-qais.yousef@arm.com
This is the last direct user of cpu_up() before it can become an internal
implementation detail of the cpu subsystem.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323135110.30522-17-qais.yousef@arm.com
arm64 uses cpu_up() in the resume from hibernation code to ensure that the
CPU on which the system hibernated is online. Provide a core function for
this.
[ tglx: Split out from the combo arm64 patch ]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200323135110.30522-9-qais.yousef@arm.com
This function will be used later in machine_shutdown() for some
architectures.
disable_nonboot_cpus() is not safe to use when doing machine_down(),
because it relies on freeze_secondary_cpus() which in turn is a
suspend/resume related freeze and could abort if the logic detects any
pending activities that can prevent finishing the offlining process.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323135110.30522-3-qais.yousef@arm.com
The new functions use device_{online,offline}() which are userspace safe.
This is in preparation to move cpu_{up, down} kernel users to use a safer
interface that is not racy with userspace.
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20200323135110.30522-2-qais.yousef@arm.com
As preparation for replacing the embedded rwsem, give percpu-rwsem its
own lockdep_map.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20200131151539.927625541@infradead.org
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
When CONFIG_SYSFS is disabled, but CONFIG_HOTPLUG_SMT is enabled,
the kernel fails to link:
arch/x86/power/cpu.o: In function `hibernate_resume_nonboot_cpu_disable':
(.text+0x38d): undefined reference to `cpuhp_smt_enable'
arch/x86/power/hibernate.o: In function `arch_resume_nosmt':
hibernate.c:(.text+0x291): undefined reference to `cpuhp_smt_enable'
hibernate.c:(.text+0x29c): undefined reference to `cpuhp_smt_disable'
Move the exported functions out of the #ifdef section into its
own with the correct conditions.
The patch that caused this is marked for stable backports, so
this one may need to be backported as well.
Fixes: ec527c3180 ("x86/power: Fix 'nosmt' vs hibernation triple fault during resume")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191210195614.786555-1-arnd@arndb.de
Paul reported a very sporadic, rcutorture induced, workqueue failure.
When the planets align, the workqueue rescuer's self-migrate fails and
then triggers a WARN for running a work on the wrong CPU.
Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call
could be ignored! When stopper->enabled is false, stop_machine will
insta complete the work, without actually doing the work. Worse, it
will not WARN about this (we really should fix this).
It turns out there is a small window where a freshly online'ed CPU is
marked 'online' but doesn't yet have the stopper task running:
BP AP
bringup_cpu()
__cpu_up(cpu, idle) --> start_secondary()
...
cpu_startup_entry()
bringup_wait_for_ap()
wait_for_ap_thread() <-- cpuhp_online_idle()
while (1)
do_idle()
... available to run kthreads ...
stop_machine_unpark()
stopper->enable = true;
Close this by moving the stop_machine_unpark() into
cpuhp_online_idle(), such that the stopper thread is ready before we
start the idle loop and schedule.
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
A kernel module may need to check the value of the "mitigations=" kernel
command line parameter as part of its setup when the module needs
to perform software mitigations for a CPU flaw.
Uninline and export the helper functions surrounding the cpu_mitigations
enum to allow for their usage from a module.
Lastly, privatize the enum and cpu_mitigations variable since the value of
cpu_mitigations can be checked with the exported helper functions.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
KVM needs to know if SMT is theoretically possible, this means it is
supported and not forcefully disabled ('nosmt=force'). Create and
export cpu_smt_possible() answering this question.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-evaluating the bitmap wheight of the online cpus bitmap in every
invocation of num_online_cpus() over and over is a pretty useless
exercise. Especially when num_online_cpus() is used in code paths
like the IPI delivery of x86 or the membarrier code.
Cache the number of online CPUs in the core and just return the cached
variable. The accessor function provides only a snapshot when used without
protection against concurrent CPU hotplug.
The storage needs to use an atomic_t because the kexec and reboot code
(ab)use set_cpu_online() in their 'shutdown' handlers without any form of
serialization as pointed out by Mathieu. Regular CPU hotplug usage is
properly serialized.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091622590.1634@nanos.tec.linutronix.de
The booted once information which is required to deal with the MCE
broadcast issue on X86 correctly is stored in the per cpu hotplug state,
which is perfectly fine for the intended purpose.
X86 needs that information for supporting NMI broadcasting via shortcuts,
but retrieving it from per cpu data is cumbersome.
Move it to a cpumask so the information can be checked against the
cpu_present_mask quickly.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.818822855@linutronix.de
Pull SMP/hotplug updates from Thomas Gleixner:
"A small set of updates for SMP and CPU hotplug:
- Abort disabling secondary CPUs in the freezer when a wakeup is
pending instead of evaluating it only after all CPUs have been
offlined.
- Remove the shared annotation for the strict per CPU cfd_data in the
smp function call core code.
- Remove the return values of smp_call_function() and on_each_cpu()
as they are unconditionally 0. Fixup the few callers which actually
bothered to check the return value"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Remove smp_call_function() and on_each_cpu() return values
smp: Do not mark call_function_data as shared
cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending
cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail
can control `struct cpuhp_step *sp` address, results in the following
global-out-of-bounds read.
Reproducer:
# echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail
KASAN report:
BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0
Read of size 8 at addr ffffffff89734438 by task bash/1941
CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ #31
Call Trace:
write_cpuhp_fail+0x2cd/0x2e0
dev_attr_store+0x58/0x80
sysfs_kf_write+0x13d/0x1a0
kernfs_fop_write+0x2bc/0x460
vfs_write+0x1e1/0x560
ksys_write+0x126/0x250
do_syscall_64+0xc1/0x390
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f05e4f4c970
The buggy address belongs to the variable:
cpu_hotplug_lock+0x98/0xa0
Memory state around the buggy address:
ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
^
ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Add a sanity check for the value written from user space.
Fixes: 1db49484f2 ("smp/hotplug: Hotplug state fail injection")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Link: https://lkml.kernel.org/r/20190627024732.31672-1-devel@etsukata.com
Currently, if the user specifies an unsupported mitigation strategy on the
kernel command line, it will be ignored silently. The code will fall back
to the default strategy, possibly leaving the system more vulnerable than
expected.
This may happen due to e.g. a simple typo, or, for a stable kernel release,
because not all mitigation strategies have been backported.
Inform the user by printing a message.
Fixes: 98af845294 ("cpu/speculation: Add 'mitigations=' cmdline option")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190516070935.22546-1-geert@linux-m68k.org
When "deep" suspend is enabled, all CPUs except the primary CPU are frozen
via CPU hotplug one by one. After all secondary CPUs are unplugged the
wakeup pending condition is evaluated and if pending the suspend operation
is aborted and the secondary CPUs are brought up again.
CPU hotplug is a slow operation, so it makes sense to check for wakeup
pending in the freezer loop before bringing down the next CPU. This
improves the system suspend abort latency significantly.
[ tglx: Massaged changelog and improved printk message ]
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: iri Kosina <jkosina@suse.cz>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: linux-pm@vger.kernel.org
Link: https://lkml.kernel.org/r/1559536263-16472-1-git-send-email-pkondeti@codeaurora.org
As explained in
0cc3cd2165 ("cpu/hotplug: Boot HT siblings at least once")
we always, no matter what, have to bring up x86 HT siblings during boot at
least once in order to avoid first MCE bringing the system to its knees.
That means that whenever 'nosmt' is supplied on the kernel command-line,
all the HT siblings are as a result sitting in mwait or cpudile after
going through the online-offline cycle at least once.
This causes a serious issue though when a kernel, which saw 'nosmt' on its
commandline, is going to perform resume from hibernation: if the resume
from the hibernated image is successful, cr3 is flipped in order to point
to the address space of the kernel that is being resumed, which in turn
means that all the HT siblings are all of a sudden mwaiting on address
which is no longer valid.
That results in triple fault shortly after cr3 is switched, and machine
reboots.
Fix this by always waking up all the SMT siblings before initiating the
'restore from hibernation' process; this guarantees that all the HT
siblings will be properly carried over to the resumed kernel waiting in
resume_play_dead(), and acted upon accordingly afterwards, based on the
target kernel configuration.
Symmetricaly, the resumed kernel has to push the SMT siblings to mwait
again in case it has SMT disabled; this means it has to online all
the siblings when resuming (so that they come out of hlt) and offline
them again to let them reach mwait.
Cc: 4.19+ <stable@vger.kernel.org> # v4.19+
Debugged-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0cc3cd2165 ("cpu/hotplug: Boot HT siblings at least once")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
bringup_wait_for_ap() comment references cpu_notify_starting(), but the
function is actually called notify_cpu_starting(). Fix that.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1905282128100.1962@cbobk.fhfr.pm
Pull timer updates from Ingo Molnar:
"This cycle had the following changes:
- Timer tracing improvements (Anna-Maria Gleixner)
- Continued tasklet reduction work: remove the hrtimer_tasklet
(Thomas Gleixner)
- Fix CPU hotplug remove race in the tick-broadcast mask handling
code (Thomas Gleixner)
- Force upper bound for setting CLOCK_REALTIME, to fix ABI
inconsistencies with handling values that are close to the maximum
supported and the vagueness of when uptime related wraparound might
occur. Make the consistent maximum the year 2232 across all
relevant ABIs and APIs. (Thomas Gleixner)
- various cleanups and smaller fixes"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick: Fix typos in comments
tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline()
timekeeping: Force upper bound for setting CLOCK_REALTIME
timer/trace: Improve timer tracing
timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps
timer: Move trace point to get proper index
tick/sched: Update tick_sched struct documentation
tick: Remove outgoing CPU from broadcast masks
timekeeping: Consistently use unsigned int for seqcount snapshot
softirq: Remove tasklet_hrtimer
xfrm: Replace hrtimer tasklet with softirq hrtimer
mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
Vincent Donnefort
Phil Auld
Jason A. Donenfeld
Steven Price
Mark Rutland
Dongli Zhang
YueHaibing
Randy Dunlap
Baokun Li
Linus Torvalds
Thomas Gleixner
Yuan ZhaoXiong
Peter Zijlstra
Vincent Donnefort
Frederic Weisbecker
Nicholas Piggin
Qais Yousef
Ethon Paul
Arnd Bergmann
Tyler Hicks
Qian Cai
Vitaly Kuznetsov
Eiichi Tsukata
Geert Uytterhoeven
Pavankumar Kondeti
Jiri Kosina