Граф коммитов

55 Коммитов

Автор SHA1 Сообщение Дата
Jens Axboe 1d6bfbdf38 as-iosched: get rid of private REQ_SYNC/REQ_ASYNC defines
We can just use the block layer BLK_RW_SYNC/ASYNC defines now.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:10 +02:00
Jens Axboe b374d18a4b block: get rid of elevator_t typedef
Just use struct elevator_queue everywhere instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:29:50 +01:00
Cheng Renquan 64d01dc9e1 block: use cancel_work_sync() instead of kblockd_flush_work()
After many improvements on kblockd_flush_work, it is now identical to
cancel_work_sync, so a direct call to cancel_work_sync is suggested.

The only difference is that cancel_work_sync is a GPL symbol,
so no non-GPL modules anymore.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29 08:28:44 +01:00
Jens Axboe f7d7b7a7a3 block: as/cfq ssd idle check update
We really need to know about the hardware tagging support as well,
since if the SSD does not do tagging then we still want to idle.
Otherwise have the same dependent sync IO vs flooding async IO
problem as on rotational media.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:19 +02:00
Jens Axboe a68bbddba4 block: add queue flag for SSD/non-rotational devices
We don't want to idle in AS/CFQ if the device doesn't have a seek
penalty. So add a QUEUE_FLAG_NONROT to indicate a non-rotational
device, low level drivers should set this flag upon discovery of
an SSD or similar device type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:19 +02:00
Jens Axboe 18887ad910 block: make kblockd_schedule_work() take the queue as parameter
Preparatory patch for checking queuing affinity.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Arjan van de Ven 12e0036818 Use WARN() in block/
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Jens Axboe 863fddcb4b as-iosched: properly protect ioc_gone and ioc count
If we have multiple tasks freeing io contexts when as-iosched
is being unloaded, we could complete() ioc_gone twice. Fix that by
protecting ioc_gone complete() and clearing with a spinlock for
just that purpose. Doesn't matter from a performance perspective,
since it'll only enter that path when ioc_gone != NULL (when as-iosched
is being rmmod'ed).

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-03 13:21:12 +02:00
Divyesh Shah d585d0b9d7 block: Fix the starving writes bug in the anticipatory IO scheduler
AS scheduler alternates between issuing read and write batches. It does
the batch switch only after all requests from the previous batch are
completed.

When switching to a write batch, if there is an on-going read request,
it waits for its completion and indicates its intention of switching by
setting ad->changed_batch and the new direction but does not update the
batch_expire_time for the new write batch which it does in the case of
no previous pending requests.
On completion of the read request, it sees that we were waiting for the
switch and schedules work for kblockd right away and resets the
ad->changed_data flag.
Now when kblockd enters dispatch_request where it is expected to pick
up a write request, it in turn ends the write batch because the
batch_expire_timer was not updated and shows the expire timestamp for
the previous batch.

This results in the write starvation for all the cases where there is
the intention for switching to a write batch, but there is a previous
in-flight read request and the batch gets reverted to a read_batch
right away.

This also holds true in the reverse case (switching from a write batch
to a read batch with an in-flight write request).

I've checked that this bug exists on 2.6.11, 2.6.18, 2.6.24 and
linux-2.6-block git HEAD. I've tested the fix on x86 platforms with
SCSI drives where the driver asks for the next request while a current
request is in-flight.

This patch is based off linux-2.6-block git HEAD.

Bug reproduction:
A simple scenario which reproduces this bug is:
- dd if=/dev/hda3 of=/dev/null &
- lilo
   The lilo takes forever to complete.

This can also be reproduced fairly easily with the earlier dd and
another test
program doing msync().

The example test program below should print out a message after every
iteration
but it simply hangs forever. With this bugfix it makes forward progress.

====
Example test program using msync() (thanks to suleiman AT google DOT
com)

inline uint64_t
rdtsc(void)
{
         int64_t tsc;

         __asm __volatile("rdtsc" : "=A" (tsc));
         return (tsc);
}

int
main(int argc, char **argv)
{
         struct stat st;
         uint64_t e, s, t;
         char *p, q;
         long i;
         int fd;

         if (argc < 2) {
                 printf("Usage: %s <file>\n", argv[0]);
                 return (1);
         }

         if ((fd = open(argv[1], O_RDWR | O_NOATIME)) < 0)
                 err(1, "open");

         if (fstat(fd, &st) < 0)
                 err(1, "fstat");

         p = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);

         t = 0;
         for (i = 0; i < 1000; i++) {
                 *p = 0;
                 msync(p, 4096, MS_SYNC);
                 s = rdtsc();
                *p = 0;
                 __asm __volatile(""::: "memory");
                 e = rdtsc();
                 if (argc > 2)
                         printf("%d: %lld cycles %jd %jd\n",
                                i, e - s, (intmax_t)s, (intmax_t)e);
                 t += e - s;
         }
         printf("average time: %lld cycles\n", t / 1000);
         return (0);
}

Cc: <stable@kernel.org>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-01 09:06:42 +02:00
Jens Axboe 3bc217ffe6 block: kill swap_io_context()
It blindly copies everything in the io_context, including the lock.
That doesn't work so well for either lock ordering or lockdep.

There seems zero point in swapping io contexts on a request to request
merge, so the best point of action is to just remove it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01 11:34:49 +01:00
Jens Axboe 8bdd3f8a69 as-iosched: fix inconsistent ioc->lock context
Since it's acquired from irq context, all locking must be of the
irq safe variant. Most are already inside the queue lock (which
already disables interrupts), but the io scheduler rmmod path
always has irqs enabled and the put_io_context() path may legally
be called with irqs enabled (even if it isn't usually). So fixup
those two.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-01 09:44:28 +01:00
Jens Axboe 149a051f82 as-iosched: fix double locking bug in as_merged_requests()
If the two requests belong to the same io context, we will attempt
to lock the same lock twice. But swapping contexts is pointless in
that case, so just check for rioc == nioc before doing the double
lock and copy.

Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-30 09:11:10 +01:00
Jens Axboe 521f3bbdba io_context sharing - anticipatory changes
changes to anticipatory io scheduler for io_context sharing

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-28 10:50:35 +01:00
Adrian Bunk 2fdd82bd88 block: let elv_register() return void
elv_register() always returns 0, and there isn't anything it does where
it should return an error (the only error condition is so grave that
it's handled with a BUG_ON).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-12-18 08:29:28 +01:00
Aaron Carroll 49565124b1 as-iosched: fix write batch start point
New write batches currently start from where the last one completed.
We have no idea where the head is after switching batches, so this
makes little sense.  Instead, start the next batch from the request
with the earliest deadline in the hope that we avoid a deadline
expiry later on.

Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-12-18 08:29:28 +01:00
Aaron Carroll 8896f3c039 as-iosched: fix incorrect comments
Two comments refer to deadlines applying to reads only.  This is
not the case.

Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-12-18 08:29:28 +01:00
Jens Axboe 165125e1e4 [BLOCK] Get rid of request_queue_t typedef
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-24 09:28:11 +02:00
Christoph Lameter 94f6030ca7 Slab allocators: Replace explicit zeroing with __GFP_ZERO
kmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing
variant in the past.  But with __GFP_ZERO it is possible now to do zeroing
while allocating.

Use __GFP_ZERO to remove the explicit clearing of memory via memset whereever
we can.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Andrew Morton 19a75d83ff kblockd: use flush_work
Switch the kblockd flushing from a global flush to a more specific
flush_work().

(akpm: bypassed maintainers, sorry.  There are other patches which depend on
this)

Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:51 -07:00
Nick Piggin c6a632a2b6 as: fix antic_expire check
Fix units mismatch (jiffies vs msecs) in as-iosched.c, spotted by Xiaoning
Ding <dingxn@cse.ohio-state.edu>.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:03 -07:00
Jens Axboe c65fb61b3c [PATCH] Allow as-iosched to be unloaded
We implemented the missing bits to allow this some time ago, and
they are integrated in AS. So remove the __module_get() to allow
the module to be unloaded.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-13 13:25:18 +01:00
David Howells 4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Jens Axboe bb37b94c68 [BLOCK] Cleanup unused variable passing
- ->init_queue() does not need the elevator passed in
- ->put_request() is a hot path and need not have the queue passed in
- cfq_update_io_seektime() does not need cfqd passed in

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-01 10:42:33 +01:00
David Howells 65f27f3844 WorkStruct: Pass the work_struct pointer instead of context data
Pass the work_struct pointer to the work function rather than context data.
The work function can use container_of() to work out the data.

For the cases where the container of the work_struct may go away the moment the
pending bit is cleared, it is made possible to defer the release of the
structure by deferring the clearing of the pending bit.

To make this work, an extra flag is introduced into the management side of the
work_struct.  This governs auto-release of the structure upon execution.

Ordinarily, the work queue executor would release the work_struct for further
scheduling or deallocation by clearing the pending bit prior to jumping to the
work function.  This means that, unless the driver makes some guarantee itself
that the work_struct won't go away, the work function may not access anything
else in the work_struct or its container lest they be deallocated..  This is a
problem if the auxiliary data is taken away (as done by the last patch).

However, if the pending bit is *not* cleared before jumping to the work
function, then the work function *may* access the work_struct and its container
with no problems.  But then the work function must itself release the
work_struct by calling work_release().

In most cases, automatic release is fine, so this is the default.  Special
initiators exist for the non-auto-release case (ending in _NAR).


Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:55:48 +00:00
Peter Zijlstra 6e9a4738c9 [PATCH] completions: lockdep annotate on stack completions
All on stack DECLARE_COMPLETIONs should be replaced by:
DECLARE_COMPLETION_ONSTACK

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:24 -07:00
Jens Axboe 0fe2347957 [PATCH] Update axboe@suse.de email address
As people often look for the copyright in files to see who to mail,
update the link to a neutral one.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:34 +02:00
Jens Axboe dc72ef4ae3 [PATCH] Add blk_start_queueing() helper
CFQ implements this on its own now, but it's really block layer
knowledge. Tells a device queue to start dispatching requests to
the driver, taking care to unplug if needed. Also fixes the issue
where as/cfq will invoke a stopped queue, which we really don't
want.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:40 +02:00
Jens Axboe b5deef9012 [PATCH] Make sure all block/io scheduler setups are node aware
Some were kmalloc_node(), some were still kmalloc(). Change them all to
kmalloc_node().

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:39 +02:00
Jens Axboe e4313dd423 [PATCH] as-iosched: use new io context counting mechanism
It's ok if the read path is a lot more costly, as long as inc/dec is
really cheap. The inc/dec will happen for each created/freed io context,
while the reading only happens when a disk queue exits.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:37 +02:00
Jens Axboe cb78b285c8 [PATCH] Drop useless bio passing in may_queue/set_request API
It's not needed for anything, so kill the bio passing.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:29:23 +02:00
Jens Axboe 8a8e674cb1 [PATCH] as-iosched: kill arq
Get rid of the as_rq request type. With the added elevator_private2, we
have enough room in struct request to get rid of any arq allocation/free
for each request.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
2006-09-30 20:27:02 +02:00
Jens Axboe 9e2585a8a2 [PATCH] as-iosched: remove arq->is_sync member
We can track this in struct request.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
2006-09-30 20:27:00 +02:00
Jens Axboe d4f2f4629e [PATCH] as-iosched: reuse rq for fifo
Saves some space in arq.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
2006-09-30 20:27:00 +02:00
Jens Axboe e37f346e34 [PATCH] as-iosched: migrate to using the elevator rb functions
This removes the rbtree handling from AS.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
2006-09-30 20:26:57 +02:00
Jens Axboe 10fd48f237 [PATCH] rbtree: fixed reversed RB_EMPTY_NODE and rb_next/prev
The conditions got reserved. Also make rb_next() and rb_prev() check
for the empty condition.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:26:56 +02:00
Jens Axboe 9817064b68 [PATCH] elevator: move the backmerging logic into the elevator core
Right now, every IO scheduler implements its own backmerging (except for
noop, which does no merging). That results in duplicated code for
essentially the same operation, which is never a good thing. This patch
moves the backmerging out of the io schedulers and into the elevator
core. We save 1.6kb of text and as a bonus get backmerging for noop as
well. Win-win!

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:26:56 +02:00
Jens Axboe 4aff5e2333 [PATCH] Split struct request ->flags into two parts
Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:23:37 +02:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Andreas Mohr d6e05edc59 spelling fixes
acquired (aquired)
contiguous (contigious)
successful (succesful, succesfull)
surprise (suprise)
whether (weather)
some other misspellings

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 18:35:02 +02:00
Jens Axboe dd67d05152 [PATCH] rbtree: support functions used by the io schedulers
They all duplicate macros to check for empty root and/or node, and
clearing a node. So put those in rbtree.h.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:39 +02:00
Jens Axboe b31dc66a54 [PATCH] Kill PF_SYNCWRITE flag
A process flag to indicate whether we are doing sync io is incredibly
ugly. It also causes performance problems when one does a lot of async
io and then proceeds to sync it. Part of the io will go out as async,
and the other part as sync. This causes a disconnect between the
previously submitted io and the synced io. For io schedulers such as CFQ,
this will cause us lost merges and suboptimal behaviour in scheduling.

Remove PF_SYNCWRITE completely from the fsync/msync paths, and let
the O_DIRECT path just directly indicate that the writes are sync
by using WRITE_SYNC instead.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-23 17:10:39 +02:00
Akinobu Mita bae386f788 [PATCH] iosched: use hlist for request hashtable
Use hlist instead of list_head for request hashtable in deadline-iosched
and as-iosched. It also can remove the flag to know hashed or unhashed.

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Jens Axboe <axboe@suse.de>

 block/as-iosched.c       |   45 +++++++++++++++++++--------------------------
 block/deadline-iosched.c |   39 ++++++++++++++++-----------------------
 2 files changed, 35 insertions(+), 49 deletions(-)
2006-06-23 17:10:38 +02:00
Linus Torvalds 2edc322d42 Merge git://git.infradead.org/~dwmw2/rbtree-2.6
* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node
2006-06-20 14:51:22 -07:00
Jens Axboe bc1c116974 [PATCH] elevator switching race
There's a race between shutting down one io scheduler and firing up the
next, in which a new io could enter and cause the io scheduler to be
invoked with bad or NULL data.

To fix this, we need to maintain the queue lock for a bit longer.
Unfortunately we cannot do that, since the elevator init requires to be
run without the lock held.  This isn't easily fixable, without also
changing the mempool API.  So split the initialization into two parts,
and alloc-init operation and an attach operation.  Then we can
preallocate the io scheduler and related structures, and run the attach
inside the lock after we detach the old one.

This patch has survived 30 minutes of 1 second io scheduler switching
with a very busy io load.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08 15:14:23 -07:00
David Woodhouse 3db3a44530 [RBTREE] Change rbtree off-tree marking in I/O schedulers.
They were abusing the rb_color field to mark nodes which weren't currently
on the tree. Fix that to use the same method as eventpoll did -- setting
the parent pointer to point back to itself. And use the appropriate
accessor macros for setting and reading the parent.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-21 13:15:17 +01:00
OGAWA Hirofumi fba822722e [PATCH 1/2] iosched: fix typo and barrier()
On rmmod path, cfq/as waits to make sure all io-contexts was
freed. However, it's using complete(), not wait_for_completion().

I think barrier() is not enough in here. To avoid the following case,
this patch replaces barrier() with smb_wmb().

	cpu0			visibility			cpu1
	                [ioc_gnone=NULL,ioc_count=1]

ioc_gnone = &all_gone		NULL,ioc_count=1
atomic_read(&ioc_count)		NULL,ioc_count=1
wait_for_completion()		NULL,ioc_count=0	atomic_sub_and_test()
				NULL,ioc_count=0	if ( && ioc_gone)
						    [ioc_gone==NULL,
						    so doesn't call complete()]
			   &all_gone,ioc_count=0

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-04-18 09:44:06 +02:00
Al Viro e572ec7e4e [PATCH] fix rmmod problems with elevator attributes, clean them up 2006-03-18 22:27:18 -05:00
Al Viro 3d1ab40f4c [PATCH] elevator_t lifetime rules and sysfs fixes 2006-03-18 18:35:43 -05:00
Al Viro 334e94de9b [PATCH] deal with rmmod/put_io_context() races
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:15 -05:00
Al Viro e17a9489b4 [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-18 18:34:12 -05:00