SHMMAX is the upper limit for the size of a shared memory segment, counted
in bytes. The actual allocation is that size, rounded up to the next full
page.
Add a check that prevents the creation of segments where the rounded up
size causes an integer overflow.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shm_tot counts the total number of pages used by shm segments.
If SHMALL is ULONG_MAX (or nearly ULONG_MAX), then the number can
overflow. Subsequent calls to shmctl(,SHM_INFO,) would return wrong
values for shm_tot.
The patch adds a detection for overflows.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The increase of SHMMAX/SHMALL is a 4 patch series.
The change itself is trivial, the only problem are interger overflows.
The overflows are not new, but if we make huge values the default, then
the code should be free from overflows.
SHMMAX:
- shmmem_file_setup places a hard limit on the segment size:
MAX_LFS_FILESIZE.
On 32-bit, the limit is > 1 TB, i.e. 4 GB-1 byte segments are
possible. Rounded up to full pages the actual allocated size
is 0. --> must be fixed, patch 3
- shmat:
- find_vma_intersection does not handle overflows properly.
--> must be fixed, patch 1
- the rest is fine, do_mmap_pgoff limits mappings to TASK_SIZE
and checks for overflows (i.e.: map 2 GB, starting from
addr=2.5GB fails).
SHMALL:
- after creating 8192 segments size (1L<<63)-1, shm_tot overflows and
returns 0. --> must be fixed, patch 2.
Userspace:
- Obviously, there could be overflows in userspace. There is nothing
we can do, only use values smaller than ULONG_MAX.
I ended with "ULONG_MAX - 1L<<24":
- TASK_SIZE cannot be used because it is the size of the current
task. Could be 4G if it's a 32-bit task on a 64-bit kernel.
- The maximum size is not standardized across archs:
I found TASK_MAX_SIZE, TASK_SIZE_MAX and TASK_SIZE_64.
- Just in case some arch revives a 4G/4G split, nearly
ULONG_MAX is a valid segment size.
- Using "0" as a magic value for infinity is even worse, because
right now 0 means 0, i.e. fail all allocations.
This patch (of 4):
find_vma_intersection() does not work as intended if addr+size overflows.
The patch adds a manual check before the call to find_vma_intersection.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
Use #include <linux/types.h> instead of <asm/types.h>
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to recreate the very same ipc_ops structure on every
kernel entry for msgget/semget/shmget. Just declare it static and be
done with it. While at it, constify it as we don't modify the structure
at runtime.
Found in the PaX patch, written by the PaX Team.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This macro appears to have been introduced back in the 2.5 era for
semtimedop32 backward compatibility on ia32:
https://lkml.org/lkml/2003/4/28/78
Nowadays, this syscall in compat just defaults back to the code found in
sem.c, so it is no longer used and can thus be removed:
long compat_sys_semtimedop(int semid, struct sembuf __user *tsems,
unsigned nsops, const struct compat_timespec __user *timeout)
{
struct timespec __user *ts64;
if (compat_convert_timespec(&ts64, timeout))
return -EFAULT;
return sys_semtimedop(semid, tsems, nsops, ts64);
}
Furthermore, there are no users in compat.c. After this change, kernel
builds just fine with both CONFIG_SYSVIPC_COMPAT and CONFIG_SYSVIPC.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull compat time conversion changes from Peter Anvin:
"Despite the branch name this is really neither an x86 nor an
x32-specific patchset, although it the implementation of the
discussions that followed the x32 security hole a few months ago.
This removes get/put_compat_timespec/val() and replaces them with
compat_get/put_timespec/val() which are savvy as to the current status
of COMPAT_USE_64BIT_TIME.
It removes several unused and/or incorrect/misleading functions (like
compat_put_timeval_convert which doesn't in fact do any conversion)
and also replaces several open-coded implementations what is now
called compat_convert_timespec() with that function"
* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compat: Fix sparse address space warnings
compat: Get rid of (get|put)_compat_time(val|spec)
Pull s390 compat wrapper rework from Heiko Carstens:
"S390 compat system call wrapper simplification work.
The intention of this work is to get rid of all hand written assembly
compat system call wrappers on s390, which perform proper sign or zero
extension, or pointer conversion of compat system call parameters.
Instead all of this should be done with C code eg by using Al's
COMPAT_SYSCALL_DEFINEx() macro.
Therefore all common code and s390 specific compat system calls have
been converted to the COMPAT_SYSCALL_DEFINEx() macro.
In order to generate correct code all compat system calls may only
have eg compat_ulong_t parameters, but no unsigned long parameters.
Those patches which change parameter types from unsigned long to
compat_ulong_t parameters are separate in this series, but shouldn't
cause any harm.
The only compat system calls which intentionally have 64 bit
parameters (preadv64 and pwritev64) in support of the x86/32 ABI
haven't been changed, but are now only available if an architecture
defines __ARCH_WANT_COMPAT_SYS_PREADV64/PWRITEV64.
System calls which do not have a compat variant but still need proper
zero extension on s390, like eg "long sys_brk(unsigned long brk)" will
get a proper wrapper function with the new s390 specific
COMPAT_SYSCALL_WRAPx() macro:
COMPAT_SYSCALL_WRAP1(brk, unsigned long, brk);
which generates the following code (simplified):
asmlinkage long sys_brk(unsigned long brk);
asmlinkage long compat_sys_brk(long brk)
{
return sys_brk((u32)brk);
}
Given that the C file which contains all the COMPAT_SYSCALL_WRAP lines
includes both linux/syscall.h and linux/compat.h, it will generate
build errors, if the declaration of sys_brk() doesn't match, or if
there exists a non-matching compat_sys_brk() declaration.
In addition this will intentionally result in a link error if
somewhere else a compat_sys_brk() function exists, which probably
should have been used instead. Two more BUILD_BUG_ONs make sure the
size and type of each compat syscall parameter can be handled
correctly with the s390 specific macros.
I converted the compat system calls step by step to verify the
generated code is correct and matches the previous code. In fact it
did not always match, however that was always a bug in the hand
written asm code.
In result we get less code, less bugs, and much more sanity checking"
* 'compat' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits)
s390/compat: add copyright statement
compat: include linux/unistd.h within linux/compat.h
s390/compat: get rid of compat wrapper assembly code
s390/compat: build error for large compat syscall args
mm/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
kexec/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
net/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
ipc/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
fs/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
ipc/compat: convert to COMPAT_SYSCALL_DEFINE
fs/compat: convert to COMPAT_SYSCALL_DEFINE
security/compat: convert to COMPAT_SYSCALL_DEFINE
mm/compat: convert to COMPAT_SYSCALL_DEFINE
net/compat: convert to COMPAT_SYSCALL_DEFINE
kernel/compat: convert to COMPAT_SYSCALL_DEFINE
fs/compat: optional preadv64/pwrite64 compat system calls
ipc/compat_sys_msgrcv: change msgtyp type from long to compat_long_t
s390/compat: partial parameter conversion within syscall wrappers
s390/compat: automatic zero, sign and pointer conversion of syscalls
s390/compat: add sync_file_range and fallocate compat syscalls
...
While testing and documenting the msgrcv() MSG_COPY flag that Stanislav
Kinsbursky added in commit 4a674f34ba ("ipc: introduce message queue
copy feature" => kernel 3.8), I discovered a couple of bugs in the
implementation. The two bugs concern MSG_COPY interactions with other
msgrcv() flags, namely:
(A) MSG_COPY + MSG_EXCEPT
(B) MSG_COPY + !IPC_NOWAIT
The bugs are distinct (and the fix for the first one is obvious),
however my fix for both is a single-line patch, which is why I'm
combining them in a single mail, rather than writing two mails+patches.
===== (A) MSG_COPY + MSG_EXCEPT =====
With the addition of the MSG_COPY flag, there are now two msgrcv()
flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp'
argument in unrelated ways. Specifying both in the same call is a
logical error that is currently permitted, with the effect that MSG_COPY
has priority and MSG_EXCEPT is ignored. The call should give an error
if both flags are specified. The patch below implements that behavior.
===== (B) (B) MSG_COPY + !IPC_NOWAIT =====
The test code that was submitted in commit 3a665531a3 ("selftests: IPC
message queue copy feature test") shows MSG_COPY being used in
conjunction with IPC_NOWAIT. In other words, if there is no message at
the position 'msgtyp'. return immediately with the error in ENOMSG.
What was not (fully) tested is the behavior if MSG_COPY is specified
*without* IPC_NOWAIT, and there is an odd behavior. If the queue
contains less than 'msgtyp' messages, then the call blocks until the
next message is written to the queue. At that point, the msgrcv() call
returns a copy of the newly added message, regardless of whether that
message is at the ordinal position 'msgtyp'. This is clearly bogus, and
problematic for applications that might want to make use of the MSG_COPY
flag.
I considered the following possible solutions to this problem:
(1) Force the call to block until a message *does* appear at the
position 'msgtyp'.
(2) If the MSG_COPY flag is specified, the kernel should implicitly add
IPC_NOWAIT, so that the call fails with ENOMSG for this case.
(3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate
an error (probably, EINVAL is the right one).
I do not know if any application would really want to have the
functionality of solution (1), especially since an application can
determine in advance the number of messages in the queue using msgctl()
IPC_STAT. Obviously, this solution would be the most work to implement.
Solution (2) would have the effect of silently fixing any applications
that tried to employ broken behavior. However, it would mean that if we
later decided to implement solution (1), then user-space could not
easily detect what the kernel supports (but, since I'm somewhat doubtful
that solution (1) is needed, I'm not sure that this is much of a
problem).
Solution (3) would have the effect of informing broken applications that
they are doing something broken. The downside is that this would cause
a ABI breakage for any applications that are currently employing the
broken behavior. However:
a) Those applications are almost certainly not getting the results they
expect.
b) Possibly, those applications don't even exist, because MSG_COPY is
currently hidden behind CONFIG_CHECKPOINT_RESTORE.
The upside of solution (3) is that if we later decided to implement
solution (1), user-space could determine what the kernel supports, via
the error return.
In my view, solution (3) is mildly preferable to solution (2), and
solution (1) could still be done later if anyone really cares. The
patch below implements solution (3).
PS. For anyone out there still listening, it's the usual story:
documenting an API (and the thinking about, and the testing of the API,
that documentation entails) is the one of the single best ways of
finding bugs in the API, as I've learned from a lot of experience. Best
to do that documentation before releasing the API.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to allow the COMPAT_SYSCALL_DEFINE macro generate code that
performs proper zero and sign extension convert all 64 bit parameters
to their corresponding 32 bit compat counterparts.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Convert all compat system call functions where all parameter types
have a size of four or less than four bytes, or are pointer types
to COMPAT_SYSCALL_DEFINE.
The implicit casts within COMPAT_SYSCALL_DEFINE will perform proper
zero and sign extension to 64 bit of all parameters if needed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Change the type of compat_sys_msgrcv's msgtyp parameter from long
to compat_long_t, since compat user space passes only a 32 bit signed
value.
Let the compat wrapper do proper sign extension to 64 bit of this
parameter.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Commit 93e6f119c0 ("ipc/mqueue: cleanup definition names and
locations") added global hardcoded limits to the amount of message
queues that can be created. While these limits are per-namespace,
reality is that it ends up breaking userspace applications.
Historically users have, at least in theory, been able to create up to
INT_MAX queues, and limiting it to just 1024 is way too low and dramatic
for some workloads and use cases. For instance, Madars reports:
"This update imposes bad limits on our multi-process application. As
our app uses approaches that each process opens its own set of queues
(usually something about 3-5 queues per process). In some scenarios
we might run up to 3000 processes or more (which of-course for linux
is not a problem). Thus we might need up to 9000 queues or more. All
processes run under one user."
Other affected users can be found in launchpad bug #1155695:
https://bugs.launchpad.net/ubuntu/+source/manpages/+bug/1155695
Instead of increasing this limit, revert it entirely and fallback to the
original way of dealing queue limits -- where once a user's resource
limit is reached, and all memory is used, new queues cannot be created.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reported-by: Madars Vitolins <m@silodev.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org> [3.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have two APIs for compatiblity timespec/val, with confusingly
similar names. compat_(get|put)_time(val|spec) *do* handle the case
where COMPAT_USE_64BIT_TIME is set, whereas
(get|put)_compat_time(val|spec) do not. This is an accident waiting
to happen.
Clean it up by favoring the full-service version; the limited version
is replaced with double-underscore versions static to kernel/compat.c.
A common pattern is to convert a struct timespec to kernel format in
an allocation on the user stack. Unfortunately it is open-coded in
several places. Since this allocation isn't actually needed if
COMPAT_USE_64BIT_TIME is true (since user format == kernel format)
encapsulate that whole pattern into the function
compat_convert_timespec(). An equivalent function should be written
for struct timeval if it is needed in the future.
Finally, get rid of compat_(get|put)_timeval_convert(): each was only
used once, and the latter was not even doing what the function said
(no conversion actually was being done.) Moving the conversion into
compat_sys_settimeofday() itself makes the code much more similar to
sys_settimeofday() itself.
v3: Remove unused compat_convert_timeval().
v2: Drop bogus "const" in the destination argument for
compat_convert_time*().
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Compat function takes msgtyp argument as u32 and passes it down to
do_msgrcv which results in casting to long, thus the sign is lost and we
get a big positive number instead.
Cast the argument to signed type before passing it down.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Reported-by: Gabriellla Schmidt <gsc@bruker.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both expunge_all() and pipeline_send() rely on both a nil msg value and
a full barrier to guarantee the correct ordering when waking up a task.
While its counterpart at the receiving end is well documented for the
lockless recv algorithm, we still need to document these specific
smp_mb() calls.
[akpm@linux-foundation.org: fix typo, per Mike]
[akpm@linux-foundation.org: mroe tpyos]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This field is only used to reset the ids seq number if it exceeds the
smaller of INT_MAX/SEQ_MULTIPLIER and USHRT_MAX, and can therefore be
moved out of the structure and into its own macro. Since each
ipc_namespace contains a table of 3 pointers to struct ipc_ids we can
save space in instruction text:
text data bss dec hex filename
56232 2348 24 58604 e4ec ipc/built-in.o
56216 2348 24 58588 e4dc ipc/built-in.o-after
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Jonathan Gonzalez <jgonzalez@linets.cl>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
IPC commenting style is all over the place, *specially* in util.c. This
patch orders things a bit.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ipc code does not adhere the typical linux coding style.
This patch fixes lots of simple whitespace errors.
- mostly autogenerated by
scripts/checkpatch.pl -f --fix \
--types=pointer_location,spacing,space_before_tab
- one manual fixup (keep structure members tab-aligned)
- removal of additional space_before_tab that were not found by --fix
Tested with some of my msg and sem test apps.
Andrew: Could you include it in -mm and move it towards Linus' tree?
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Suggested-by: Li Bin <huawei.libin@huawei.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct kern_ipc_perm.deleted is meant to be used as a boolean toggle, and
the changes introduced by this patch are just to make the case explicit.
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the locking semantics for the SysV IPC API got improved, a couple
of IPC_RMID race windows were opened because we ended up dropping the
'kern_ipc_perm.deleted' check performed way down in ipc_lock(). The
spotted races got sorted out by re-introducing the old test within the
racy critical sections.
This patch introduces ipc_valid_object() to consolidate the way we cope
with IPC_RMID races by using the same abstraction across the API
implementation.
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When trying to understand semop code, I found a small mistake in the check
for semadj (undo) value overflow. The new undo value is not stored
immediately and next potential checks are done against the old value.
The failing scenario is not much practical. One semop call has to do more
operations on the same semaphore. Also semval and semadj must have
different values, so there has to be some operations without SEM_UNDO
flag. For example:
struct sembuf depositor_op[1];
struct sembuf collector_op[2];
depositor_op[0].sem_num = 0;
depositor_op[0].sem_op = 20000;
depositor_op[0].sem_flg = 0;
collector_op[0].sem_num = 0;
collector_op[0].sem_op = -10000;
collector_op[0].sem_flg = SEM_UNDO;
collector_op[1].sem_num = 0;
collector_op[1].sem_op = -10000;
collector_op[1].sem_flg = SEM_UNDO;
if (semop(semid, depositor_op, 1) == -1)
{ perror("Failed to do 1st deposit"); return 1; }
if (semop(semid, collector_op, 2) == -1)
{ perror("Failed to do 1st collect"); return 1; }
if (semop(semid, depositor_op, 1) == -1)
{ perror("Failed to do 2nd deposit"); return 1; }
if (semop(semid, collector_op, 2) == -1)
{ perror("Failed to do 2nd collect"); return 1; }
return 0;
It passes without error now but the semadj value has overflown in the 2nd
collector operation.
[akpm@linux-foundation.org: restore lessened scope of local `undo']
[davidlohr@hp.com: correct header comment for perform_atomic_semop]
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 2caacaa82a ("ipc,shm: shorten critical region for shmctl")
restructured the ipc shm to shorten critical region, but introduced a
path where the return value could be -EPERM, even if the operation
actually was performed.
Before the commit, the err return value was reset by the return value
from security_shm_shmctl() after the if (!ns_capable(...)) statement.
Now, we still exit the if statement with err set to -EPERM, and in the
case of SHM_UNLOCK, it is not reset at all, and used as the return value
from shmctl.
To fix this, we only set err when errors occur, leaving the fallthrough
case alone.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> [3.12.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When IPC_RMID races with other shm operations there's potential for
use-after-free of the shm object's associated file (shm_file).
Here's the race before this patch:
TASK 1 TASK 2
------ ------
shm_rmid()
ipc_lock_object()
shmctl()
shp = shm_obtain_object_check()
shm_destroy()
shum_unlock()
fput(shp->shm_file)
ipc_lock_object()
shmem_lock(shp->shm_file)
<OOPS>
The oops is caused because shm_destroy() calls fput() after dropping the
ipc_lock. fput() clears the file's f_inode, f_path.dentry, and
f_path.mnt, which causes various NULL pointer references in task 2. I
reliably see the oops in task 2 if with shmlock, shmu
This patch fixes the races by:
1) set shm_file=NULL in shm_destroy() while holding ipc_object_lock().
2) modify at risk operations to check shm_file while holding
ipc_object_lock().
Example workloads, which each trigger oops...
Workload 1:
while true; do
id=$(shmget 1 4096)
shm_rmid $id &
shmlock $id &
wait
done
The oops stack shows accessing NULL f_inode due to racing fput:
_raw_spin_lock
shmem_lock
SyS_shmctl
Workload 2:
while true; do
id=$(shmget 1 4096)
shmat $id 4096 &
shm_rmid $id &
wait
done
The oops stack is similar to workload 1 due to NULL f_inode:
touch_atime
shmem_mmap
shm_mmap
mmap_region
do_mmap_pgoff
do_shmat
SyS_shmat
Workload 3:
while true; do
id=$(shmget 1 4096)
shmlock $id
shm_rmid $id &
shmunlock $id &
wait
done
The oops stack shows second fput tripping on an NULL f_inode. The
first fput() completed via from shm_destroy(), but a racing thread did
a get_file() and queued this fput():
locks_remove_flock
__fput
____fput
task_work_run
do_notify_resume
int_signal
Fixes: c2c737a046 ("ipc,shm: shorten critical region for shmat")
Fixes: 2caacaa82a ("ipc,shm: shorten critical region for shmctl")
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org> # 3.10.17+ 3.11.6+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge first patch-bomb from Andrew Morton:
"Quite a lot of other stuff is banked up awaiting further
next->mainline merging, but this batch contains:
- Lots of random misc patches
- OCFS2
- Most of MM
- backlight updates
- lib/ updates
- printk updates
- checkpatch updates
- epoll tweaking
- rtc updates
- hfs
- hfsplus
- documentation
- procfs
- update gcov to gcc-4.7 format
- IPC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
ipc, msg: fix message length check for negative values
ipc/util.c: remove unnecessary work pending test
devpts: plug the memory leak in kill_sb
./Makefile: export initial ramdisk compression config option
init/Kconfig: add option to disable kernel compression
drivers: w1: make w1_slave::flags long to avoid memory corruption
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
drivers/memstick/core/mspro_block.c: fix attributes array allocation
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
kernel/panic.c: reduce 1 byte usage for print tainted buffer
gcov: reuse kbasename helper
kernel/gcov/fs.c: use pr_warn()
kernel/module.c: use pr_foo()
gcov: compile specific gcov implementation based on gcc version
gcov: add support for gcc 4.7 gcov format
gcov: move gcov structs definitions to a gcc version specific file
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
...
Pull vfs updates from Al Viro:
"All kinds of stuff this time around; some more notable parts:
- RCU'd vfsmounts handling
- new primitives for coredump handling
- files_lock is gone
- Bruce's delegations handling series
- exportfs fixes
plus misc stuff all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
ecryptfs: ->f_op is never NULL
locks: break delegations on any attribute modification
locks: break delegations on link
locks: break delegations on rename
locks: helper functions for delegation breaking
locks: break delegations on unlink
namei: minor vfs_unlink cleanup
locks: implement delegations
locks: introduce new FL_DELEG lock flag
vfs: take i_mutex on renamed file
vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
vfs: don't use PARENT/CHILD lock classes for non-directories
vfs: pull ext4's double-i_mutex-locking into common code
exportfs: fix quadratic behavior in filehandle lookup
exportfs: better variable name
exportfs: move most of reconnect_path to helper function
exportfs: eliminate unused "noprogress" counter
exportfs: stop retrying once we race with rename/remove
exportfs: clear DISCONNECTED on all parents sooner
exportfs: more detailed comment for path_reconnect
...
On 64 bit systems the test for negative message sizes is bogus as the
size, which may be positive when evaluated as a long, will get truncated
to an int when passed to load_msg(). So a long might very well contain a
positive value but when truncated to an int it would become negative.
That in combination with a small negative value of msg_ctlmax (which will
be promoted to an unsigned type for the comparison against msgsz, making
it a big positive value and therefore make it pass the check) will lead to
two problems: 1/ The kmalloc() call in alloc_msg() will allocate a too
small buffer as the addition of alen is effectively a subtraction. 2/ The
copy_from_user() call in load_msg() will first overflow the buffer with
userland data and then, when the userland access generates an access
violation, the fixup handler copy_user_handle_tail() will try to fill the
remainder with zeros -- roughly 4GB. That almost instantly results in a
system crash or reset.
,-[ Reproducer (needs to be run as root) ]--
| #include <sys/stat.h>
| #include <sys/msg.h>
| #include <unistd.h>
| #include <fcntl.h>
|
| int main(void) {
| long msg = 1;
| int fd;
|
| fd = open("/proc/sys/kernel/msgmax", O_WRONLY);
| write(fd, "-1", 2);
| close(fd);
|
| msgsnd(0, &msg, 0xfffffff0, IPC_NOWAIT);
|
| return 0;
| }
'---
Fix the issue by preventing msgsz from getting truncated by consistently
using size_t for the message length. This way the size checks in
do_msgsnd() could still be passed with a negative value for msg_ctlmax but
we would fail on the buffer allocation in that case and error out.
Also change the type of m_ts from int to size_t to avoid similar nastiness
in other code paths -- it is used in similar constructs, i.e. signed vs.
unsigned checks. It should never become negative under normal
circumstances, though.
Setting msg_ctlmax to a negative value is an odd configuration and should
be prevented. As that might break existing userland, it will be handled
in a separate commit so it could easily be reverted and reworked without
reintroducing the above described bug.
Hardening mechanisms for user copy operations would have catched that bug
early -- e.g. checking slab object sizes on user copy operations as the
usercopy feature of the PaX patch does. Or, for that matter, detect the
long vs. int sign change due to truncation, as the size overflow plugin
of the very same patch does.
[akpm@linux-foundation.org: fix i386 min() warnings]
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Pax Team <pageexec@freemail.hu>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org> [ v2.3.27+ -- yes, that old ;) ]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove unnecessary work pending test before calling schedule_work(). It
has been tested in queue_work_on() already. No functional changed.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to break delegations on any operation that changes the set of
links pointing to an inode. Start with unlink.
Such operations also hold the i_mutex on a parent directory. Breaking a
delegation may require waiting for a timeout (by default 90 seconds) in
the case of a unresponsive NFS client. To avoid blocking all directory
operations, we therefore drop locks before waiting for the delegation.
The logic then looks like:
acquire locks
...
test for delegation; if found:
take reference on inode
release locks
wait for delegation break
drop reference on inode
retry
It is possible this could never terminate. (Even if we take precautions
to prevent another delegation being acquired on the same inode, we could
get a different inode on each retry.) But this seems very unlikely.
The initial test for a delegation happens after the lock on the target
inode is acquired, but the directory inode may have been acquired
further up the call stack. We therefore add a "struct inode **"
argument to any intervening functions, which we use to pass the inode
back up to the caller in the case it needs a delegation synchronously
broken.
Cc: David Howells <dhowells@redhat.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Negative message lengths make no sense -- so don't do negative queue
lenghts or identifier counts. Prevent them from getting negative.
Also change the underlying data types to be unsigned to avoid hairy
surprises with sign extensions in cases where those variables get
evaluated in unsigned expressions with bigger data types, e.g size_t.
In case a user still wants to have "unlimited" sizes she could just use
INT_MAX instead.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After acquiring the semlock spinlock, operations must test that the
array is still valid.
- semctl() and exit_sem() would walk stale linked lists (ugly, but
should be ok: all lists are empty)
- semtimedop() would sleep forever - and if woken up due to a signal -
access memory after free.
The patch also:
- standardizes the tests for .deleted, so that all tests in one
function leave the function with the same approach.
- unconditionally tests for .deleted immediately after every call to
sem_lock - even it it means that for semctl(GETALL), .deleted will be
tested twice.
Both changes make the review simpler: After every sem_lock, there must
be a test of .deleted, followed by a goto to the cleanup code (if the
function uses "goto cleanup").
The only exception is semctl_down(): If sem_ids().rwsem is locked, then
the presence in ids->ipcs_idr is equivalent to !.deleted, thus no
additional test is required.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The initial documentation was a bit incomplete, update accordingly.
[akpm@linux-foundation.org: make it more readable in 80 columns]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a race in both msgrcv() and msgsnd() between finding the msg
and actually dealing with the queue, as another thread can delete shmid
underneath us if we are preempted before acquiring the
kern_ipc_perm.lock.
Manfred illustrates this nicely:
Assume a preemptible kernel that is preempted just after
msq = msq_obtain_object_check(ns, msqid)
in do_msgrcv(). The only lock that is held is rcu_read_lock().
Now the other thread processes IPC_RMID. When the first task is
resumed, then it will happily wait for messages on a deleted queue.
Fix this by checking for if the queue has been deleted after taking the
lock.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Reported-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: <stable@vger.kernel.org> [3.11]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 0a2b9d4c79 ("ipc/sem.c: move wake_up_process out of the
spinlock section"), the update of semaphore's sem_otime(last semop time)
was moved to one central position (do_smart_update).
But since do_smart_update() is only called for operations that modify
the array, this means that wait-for-zero semops do not update sem_otime
anymore.
The fix is simple:
Non-alter operations must update sem_otime.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Jia He <jiakernel@gmail.com>
Tested-by: Jia He <jiakernel@gmail.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The proc interface is not aware of sem_lock(), it instead calls
ipc_lock_object() directly. This means that simple semop() operations
can run in parallel with the proc interface. Right now, this is
uncritical, because the implementation doesn't do anything that requires
a proper synchronization.
But it is dangerous and therefore should be fixed.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Operations that need access to the whole array must guarantee that there
are no simple operations ongoing. Right now this is achieved by
spin_unlock_wait(sem->lock) on all semaphores.
If complex_count is nonzero, then this spin_unlock_wait() is not
necessary, because it was already performed in the past by the thread
that increased complex_count and even though sem_perm.lock was dropped
inbetween, no simple operation could have started, because simple
operations cannot start when complex_count is non-zero.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The exclusion of complex operations in sem_lock() is insufficient: after
acquiring the per-semaphore lock, a simple op must first check that
sem_perm.lock is not locked and only after that test check
complex_count. The current code does it the other way around - and that
creates a race. Details are below.
The patch is a complete rewrite of sem_lock(), based in part on the code
from Mike Galbraith. It removes all gotos and all loops and thus the
risk of livelocks.
I have tested the patch (together with the next one) on my i3 laptop and
it didn't cause any problems.
The bug is probably also present in 3.10 and 3.11, but for these kernels
it might be simpler just to move the test of sma->complex_count after
the spin_is_locked() test.
Details of the bug:
Assume:
- sma->complex_count = 0.
- Thread 1: semtimedop(complex op that must sleep)
- Thread 2: semtimedop(simple op).
Pseudo-Trace:
Thread 1: sem_lock(): acquire sem_perm.lock
Thread 1: sem_lock(): check for ongoing simple ops
Nothing ongoing, thread 2 is still before sem_lock().
Thread 1: try_atomic_semop()
<<< preempted.
Thread 2: sem_lock():
static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
int nsops)
{
int locknum;
again:
if (nsops == 1 && !sma->complex_count) {
struct sem *sem = sma->sem_base + sops->sem_num;
/* Lock just the semaphore we are interested in. */
spin_lock(&sem->lock);
/*
* If sma->complex_count was set while we were spinning,
* we may need to look at things we did not lock here.
*/
if (unlikely(sma->complex_count)) {
spin_unlock(&sem->lock);
goto lock_array;
}
<<<<<<<<<
<<< complex_count is still 0.
<<<
<<< Here it is preempted
<<<<<<<<<
Thread 1: try_atomic_semop() returns, notices that it must sleep.
Thread 1: increases sma->complex_count.
Thread 1: drops sem_perm.lock
Thread 2:
/*
* Another process is holding the global lock on the
* sem_array; we cannot enter our critical section,
* but have to wait for the global lock to be released.
*/
if (unlikely(spin_is_locked(&sma->sem_perm.lock))) {
spin_unlock(&sem->lock);
spin_unlock_wait(&sma->sem_perm.lock);
goto again;
}
<<< sem_perm.lock already dropped, thus no "goto again;"
locknum = sops->sem_num;
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, IPC mechanisms do security and auditing related checks under
RCU. However, since security modules can free the security structure,
for example, through selinux_[sem,msg_queue,shm]_free_security(), we can
race if the structure is freed before other tasks are done with it,
creating a use-after-free condition. Manfred illustrates this nicely,
for instance with shared mem and selinux:
-> do_shmat calls rcu_read_lock()
-> do_shmat calls shm_object_check().
Checks that the object is still valid - but doesn't acquire any locks.
Then it returns.
-> do_shmat calls security_shm_shmat (e.g. selinux_shm_shmat)
-> selinux_shm_shmat calls ipc_has_perm()
-> ipc_has_perm accesses ipc_perms->security
shm_close()
-> shm_close acquires rw_mutex & shm_lock
-> shm_close calls shm_destroy
-> shm_destroy calls security_shm_free (e.g. selinux_shm_free_security)
-> selinux_shm_free_security calls ipc_free_security(&shp->shm_perm)
-> ipc_free_security calls kfree(ipc_perms->security)
This patch delays the freeing of the security structures after all RCU
readers are done. Furthermore it aligns the security life cycle with
that of the rest of IPC - freeing them based on the reference counter.
For situations where we need not free security, the current behavior is
kept. Linus states:
"... the old behavior was suspect for another reason too: having the
security blob go away from under a user sounds like it could cause
various other problems anyway, so I think the old code was at least
_prone_ to bugs even if it didn't have catastrophic behavior."
I have tested this patch with IPC testcases from LTP on both my
quad-core laptop and on a 64 core NUMA server. In both cases selinux is
enabled, and tests pass for both voluntary and forced preemption models.
While the mentioned races are theoretical (at least no one as reported
them), I wanted to make sure that this new logic doesn't break anything
we weren't aware of.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This function was replaced by a the lockless shm_obtain_object_check(),
and no longer has any users.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After previous cleanups and optimizations, this function is no longer
heavily used and we don't have a good reason to keep it. Update the few
remaining callers and get rid of it.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When !CONFIG_MMU there's a chance we can derefence a NULL pointer when the
VM area isn't found - check the return value of find_vma().
Also, remove the redundant -EINVAL return: retval is set to the proper
return code and *only* changed to 0, when we actually unmap the segments.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As suggested by Andrew, add a generic initial locking scheme used
throughout all sysv ipc mechanisms. Documenting the ids rwsem, how rcu
can be enough to do the initial checks and when to actually acquire the
kern_ipc_perm.lock spinlock.
I found that adding it to util.c was generic enough.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only one user left, drop this function and just call
ipc_unlock_object() and rcu_read_unlock().
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since in some situations the lock can be shared for readers, we shouldn't
be calling it a mutex, rename it to rwsem.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to other system calls, acquire the kern_ipc_perm lock after doing
the initial permission and security checks.
[sasha.levin@oracle.com: dont leave do_shmat with rcu lock held]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up some of the messy do_shmat() spaghetti code, getting rid of
out_free and out_put_dentry labels. This makes shortening the critical
region of this function in the next patch a little easier to do and read.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the *_INFO, *_STAT, IPC_RMID and IPC_SET commands already optimized,
deal with the remaining SHM_LOCK and SHM_UNLOCK commands. Take the
shm_perm lock after doing the initial auditing and security checks. The
rest of the logic remains unchanged.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While the INFO cmd doesn't take the ipc lock, the STAT commands do acquire
it unnecessarily. We can do the permissions and security checks only
holding the rcu lock.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to semctl and msgctl, when calling msgctl, the *_INFO and *_STAT
commands can be performed without acquiring the ipc object.
Add a shmctl_nolock() function and move the logic of *_INFO and *_STAT out
of msgctl(). Since we are just moving functionality, this change still
takes the lock and it will be properly lockless in the next patch.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that sem, msgque and shm, through *_down(), all use the lockless
variant of ipcctl_pre_down(), go ahead and delete it.
[akpm@linux-foundation.org: fix function name in kerneldoc, cleanups]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of holding the ipc lock for the entire function, use the
ipcctl_pre_down_nolock and only acquire the lock for specific commands:
RMID and SET.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the third and final patchset that deals with reducing the amount
of contention we impose on the ipc lock (kern_ipc_perm.lock). These
changes mostly deal with shared memory, previous work has already been
done for semaphores and message queues:
http://lkml.org/lkml/2013/3/20/546 (sems)
http://lkml.org/lkml/2013/5/15/584 (mqueues)
With these patches applied, a custom shm microbenchmark stressing shmctl
doing IPC_STAT with 4 threads a million times, reduces the execution
time by 50%. A similar run, this time with IPC_SET, reduces the
execution time from 3 mins and 35 secs to 27 seconds.
Patches 1-8: replaces blindly taking the ipc lock for a smarter
combination of rcu and ipc_obtain_object, only acquiring the spinlock
when updating.
Patch 9: renames the ids rw_mutex to rwsem, which is what it already was.
Patch 10: is a trivial mqueue leftover cleanup
Patch 11: adds a brief lock scheme description, requested by Andrew.
This patch:
Add shm_obtain_object() and shm_obtain_object_check(), which will allow us
to get the ipc object without acquiring the lock. Just as with other
forms of ipc, these functions are basically wrappers around
ipc_obtain_object*().
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull namespace changes from Eric Biederman:
"This is an assorted mishmash of small cleanups, enhancements and bug
fixes.
The major theme is user namespace mount restrictions. nsown_capable
is killed as it encourages not thinking about details that need to be
considered. A very hard to hit pid namespace exiting bug was finally
tracked and fixed. A couple of cleanups to the basic namespace
infrastructure.
Finally there is an enhancement that makes per user namespace
capabilities usable as capabilities, and an enhancement that allows
the per userns root to nice other processes in the user namespace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Kill nsown_capable it makes the wrong thing easy
capabilities: allow nice if we are privileged
pidns: Don't have unshare(CLONE_NEWPID) imply CLONE_THREAD
userns: Allow PR_CAPBSET_DROP in a user namespace.
namespaces: Simplify copy_namespaces so it is clear what is going on.
pidns: Fix hang in zap_pid_ns_processes by sending a potentially extra wakeup
sysfs: Restrict mounting sysfs
userns: Better restrictions on when proc and sysfs can be mounted
vfs: Don't copy mount bind mounts of /proc/<pid>/ns/mnt between namespaces
kernel/nsproxy.c: Improving a snippet of code.
proc: Restrict mounting the proc filesystem
vfs: Lock in place mounts from more privileged users
The check if the queue is full and adding current to the wait queue of
pending msgsnd() operations (ss_add()) must be atomic.
Otherwise:
- the thread that performs msgsnd() finds a full queue and decides to
sleep.
- the thread that performs msgrcv() first reads all messages from the
queue and then sleeps, because the queue is empty.
- the msgrcv() calls do not perform any wakeups, because the msgsnd()
task has not yet called ss_add().
- then the msgsnd()-thread first calls ss_add() and then sleeps.
Net result: msgsnd() and msgrcv() both sleep forever.
Observed with msgctl08 from ltp with a preemptible kernel.
Fix: Call ipc_lock_object() before performing the check.
The patch also moves security_msg_queue_msgsnd() under ipc_lock_object:
- msgctl(IPC_SET) explicitely mentions that it tries to expunge any
pending operations that are not allowed anymore with the new
permissions. If security_msg_queue_msgsnd() is called without locks,
then there might be races.
- it makes the patch much simpler.
Reported-and-tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: stable@vger.kernel.org # for 3.11
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nsown_capable is a special case of ns_capable essentially for just CAP_SETUID and
CAP_SETGID. For the existing users it doesn't noticably simplify things and
from the suggested patches I have seen it encourages people to do the wrong
thing. So remove nsown_capable.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
According to 'man msgrcv': "If msgtyp is less than 0, the first message of
the lowest type that is less than or equal to the absolute value of msgtyp
shall be received."
Bug: The kernel only returns a message if its type is 1; other messages
with type < abs(msgtype) will never get returned.
Fix: After having traversed the list to find the first message with the
lowest type, we need to actually return that message.
This regression was introduced by commit daaf74cf08 ("ipc: refactor
msg list search into separate function")
Signed-off-by: Svenning Soerensen <sss@secomea.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup: Some minor points that I noticed while writing the previous
patches
1) The name try_atomic_semop() is misleading: The function performs the
operation (if it is possible).
2) Some documentation updates.
No real code change, a rename and documentation changes.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sem_otime contains the time of the last semaphore operation that
completed successfully. Every operation updates this value, thus access
from multiple cpus can cause thrashing.
Therefore the patch replaces the variable with a per-semaphore variable.
The per-array sem_otime is only calculated when required.
No performance improvement on a single-socket i3 - only important for
larger systems.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two places that can contain alter operations:
- the global queue: sma->pending_alter
- the per-semaphore queues: sma->sem_base[].pending_alter.
Since one of the queues must be processed first, this causes an odd
priorization of the wakeups: complex operations have priority over
simple ops.
The patch restores the behavior of linux <=3.0.9: The longest waiting
operation has the highest priority.
This is done by using only one queue:
- if there are complex ops, then sma->pending_alter is used.
- otherwise, the per-semaphore queues are used.
As a side effect, do_smart_update_queue() becomes much simpler: no more
goto logic.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce separate queues for operations that do not modify the
semaphore values. Advantages:
- Simpler logic in check_restart().
- Faster update_queue(): Right now, all wait-for-zero operations are
always tested, even if the semaphore value is not 0.
- wait-for-zero gets again priority, as in linux <=3.0.9
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As now each semaphore has its own spinlock and parallel operations are
possible, give each semaphore its own cacheline.
On a i3 laptop, this gives up to 28% better performance:
#semscale 10 | grep "interleave 2"
- before:
Cpus 1, interleave 2 delay 0: 36109234 in 10 secs
Cpus 2, interleave 2 delay 0: 55276317 in 10 secs
Cpus 3, interleave 2 delay 0: 62411025 in 10 secs
Cpus 4, interleave 2 delay 0: 81963928 in 10 secs
-after:
Cpus 1, interleave 2 delay 0: 35527306 in 10 secs
Cpus 2, interleave 2 delay 0: 70922909 in 10 secs <<< + 28%
Cpus 3, interleave 2 delay 0: 80518538 in 10 secs
Cpus 4, interleave 2 delay 0: 89115148 in 10 secs <<< + 8.7%
i3, with 2 cores and with hyperthreading enabled. Interleave 2 in order
use first the full cores. HT partially hides the delay from cacheline
trashing, thus the improvement is "only" 8.7% if 4 threads are running.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enforce that ipc_rcu_alloc returns a cacheline aligned pointer on SMP.
Rationale:
The SysV sem code tries to move the main spinlock into a seperate
cacheline (____cacheline_aligned_in_smp). This works only if
ipc_rcu_alloc returns cacheline aligned pointers. vmalloc and kmalloc
return cacheline algined pointers, the implementation of ipc_rcu_alloc
breaks that.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can now drop the msg_lock and msg_lock_check functions along with a
bogus comment introduced previously in semctl_down.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_msgrcv() is the last msg queue function that abuses the ipc lock Take
it only when needed when actually updating msq.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_msgsnd() is another function that does too many things with the ipc
object lock acquired. Take it only when needed when actually updating
msq.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While the INFO cmd doesn't take the ipc lock, the STAT commands do
acquire it unnecessarily. We can do the permissions and security checks
only holding the rcu lock.
This function now mimics semctl_nolock().
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add msq_obtain_object() and msq_obtain_object_check(), which will allow
us to get the ipc object without acquiring the lock. Just as with
semaphores, these functions are basically wrappers around
ipc_obtain_object*().
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to semctl, when calling msgctl, the *_INFO and *_STAT commands
can be performed without acquiring the ipc object.
Add a msgctl_nolock() function and move the logic of *_INFO and *_STAT
out of msgctl(). This change still takes the lock and it will be
properly lockless in the next patch
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of holding the ipc lock for the entire function, use the
ipcctl_pre_down_nolock and only acquire the lock for specific commands:
RMID and SET.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This function currently acquires both the rw_mutex and the rcu lock on
successful lookups, leaving the callers to explicitly unlock them,
creating another two level locking situation.
Make the callers (including those that still use ipcctl_pre_down())
explicitly lock and unlock the rwsem and rcu lock.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset continues the work that began in the sysv ipc semaphore
scaling series, see
https://lkml.org/lkml/2013/3/20/546
Just like semaphores used to be, sysv shared memory and msg queues also
abuse the ipc lock, unnecessarily holding it for operations such as
permission and security checks.
This patchset mostly deals with mqueues, and while shared mem can be
done in a very similar way, I want to get these patches out in the open
first. It also does some pending cleanups, mostly focused on the two
level locking we have in ipc code, taking care of ipc_addid() and
ipcctl_pre_down_nolock() - yes there are still functions that need to be
updated as well.
This patch:
Make all callers explicitly take and release the RCU read lock.
This addresses the two level locking seen in newary(), newseg() and
newqueue(). For the last two, explicitly unlock the ipc object and the
rcu lock, instead of calling the custom shm_unlock and msg_unlock
functions. The next patch will deal with the open coded locking for
->perm.lock
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The old audit PATH records for mq_open looked like this:
type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
obj=system_u:object_r:tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
...with the audit related changes that went into 3.7, they now look like this:
type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
obj=system_u:object_r:tmpfs_t:s15:c0.c1023
type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"
Both of these look wrong to me. As Steve Grubb pointed out:
"What we need is 1 PATH record that identifies the MQ. The other PATH
records probably should not be there."
Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting. With this change, we get
a single PATH record that looks more like this:
type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
obj=unconfined_u:object_r:user_tmpfs_t:s0
In order to do this, a new audit_inode_parent_hidden() function is
added. If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_smart_update_queue() is called when an operation (semop,
semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check
which of the sleeping tasks can proceed.
do_smart_update_queue() missed a few wakeups:
- if a sleeping complex op was completed, then all per-semaphore queues
must be scanned - not only those that were modified by *sops
- if a sleeping simple op proceeded, then the global queue must be
scanned again
And:
- the test for "|sops == NULL) before scanning the global queue is not
required: If the global queue is empty, then it doesn't need to be
scanned - regardless of the reason for calling do_smart_update_queue()
The patch is not optimized, i.e. even completing a wait-for-zero
operation causes a rescan. This is done to keep the patch as simple as
possible.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The semctl GETNCNT returns the number of semops waiting for the
specified semaphore to become nonzero. After commit 9f1bc2c902
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.
In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The semctl GETZCNT returns the number of semops waiting for the
specified semaphore to become zero. After commit 9f1bc2c902
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.
In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.
This bug broke dbench; it works again with this patch applied.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Kent Overstreet <koverstreet@google.com>
Tested-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current kernel returns -EINVAL unless a given mmap length is
"almost" hugepage aligned. This is because in sys_mmap_pgoff() the
given length is passed to vm_mmap_pgoff() as it is without being aligned
with hugepage boundary.
This is a regression introduced in commit 40716e2924 ("hugetlbfs: fix
alignment of huge page requests"), where alignment code is pushed into
hugetlb_file_setup() and the variable len in caller side is not changed.
To fix this, this patch partially reverts that commit, and adds
alignment code in caller side. And it also introduces hstate_sizelog()
in order to get proper hstate to specified hugepage size.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881
[akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: <iceman_dvd@yahoo.com>
Cc: Steven Truelove <steven.truelove@utoronto.ca>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This trivially combines two rcu_read_lock() calls in both sides of a
if-statement into one single one in front of the if-statement.
Split out as an independent cleanup from the previous commit.
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With various straight RCU lock/unlock movements, one common exit path
pattern had become
rcu_read_unlock();
goto out_wakeup;
and in fact there were no cases where we wanted to exit to out_wakeup
_without_ releasing the RCU read lock.
So replace that pattern with "goto out_rcu_wakeup", and remove the old
out_wakeup.
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sem_obtain_lock() was another of those functions that returned with the
RCU lock held for reading in the success case. Move the RCU locking to
the caller (semtimedop()), making it more obvious. We already did RCU
locking elsewhere in that function.
Side note: why does semtimedop() re-do the semphore lookup after the
sleep, rather than just getting a reference to the semaphore it already
looked up originally?
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix another ipc locking buglet introduced by the scalability patches:
when semctl_down() was changed to delay the semaphore locking, one error
path for security_sem_semctl() went through the semaphore unlock logic
even though the semaphore had never been locked.
Introduced by commit 16df3674ef ("ipc,sem: do not hold ipc lock more
than necessary")
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is another ipc semaphore locking cleanup, trying to make the
locking more straightforward. We move the rcu read locking into the
callers of sem_lock_and_putref(), which in general means that we now
mostly do the rcu_read_lock() and rcu_read_unlock() in the same
function.
Mostly. We still have the ipc_addid/newary/freeary mess, and things
like ipcctl_pre_down_nolock().
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc_rcu_putref() uses atomics for the refcount, and the games to lock
and unlock the semaphore just to try to keep the reference counting
working are no longer useful.
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IPC locking is a mess, and sem_unlock() unlocks not only the
semaphore spinlock, it also drops the rcu read lock. Unlike sem_lock(),
which just gets the spin-lock, and expects the caller to get the rcu
read lock.
This all makes things very hard to follow, and it's very confusing when
you take the rcu read lock in one function, and then release it in
another. And it has caused actual bugs: the sem_obtain_lock() function
ended up dropping the RCU read lock twice in one error path, because it
first did the sem_unlock(), and then did a rcu_read_unlock() to match
the rcu_read_lock() it had done.
This is just a totally mindless "remove rcu_read_unlock() from
sem_unlock() and add it immediately after each caller" (except for the
aforementioned bug where we did too many rcu_read_unlock(), and in
find_alloc_undo() where we just got the rcu_read_lock() to correct for
the fact that sem_unlock would immediately drop it again).
We can (and should) clean things up further, but this fixes the bug with
the minimal amount of subtlety.
Reviewed-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can step on WARN_ON_ONCE() in sem_getref() if a semaphore is removed
just as we are about to call sem_getref() from semctl_main(); results
are not pretty.
We should fail with -EIDRM, same as if IPC_RM happened while we'd been
doing allocation there. This also expands sem_getref() at its only
callsite (and fixed there), while sem_getref_and_unlock() is simply
killed off - it has no callers at all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 32fcfd4071 ("make vfree() safe to call from interrupt
contexts") made it safe to do vfree directly from the RCU callback,
which allows us to simplify ipc/util.c a lot by getting rid of the
differences between vmalloc/kmalloc memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
Split the proc namespace stuff out into linux/proc_ns.h.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: netdev@vger.kernel.org
cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Trying to run an application which was trying to put data into half of
memory using shmget(), we found that having a shmall value below 8EiB-8TiB
would prevent us from using anything more than 8TiB. By setting
kernel.shmall greater than 8EiB-8TiB would make the job work.
In the newseg() function, ns->shm_tot which, at 8TiB is INT_MAX.
ipc/shm.c:
458 static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
459 {
...
465 int numpages = (size + PAGE_SIZE -1) >> PAGE_SHIFT;
...
474 if (ns->shm_tot + numpages > ns->shm_ctlall)
475 return -ENOSPC;
[akpm@linux-foundation.org: make ipc/shm.c:newseg()'s numpages size_t, not int]
Signed-off-by: Robin Holt <holt@sgi.com>
Reported-by: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ipc/msg.c code does its list operations by hand and it open-codes the
accesses, instead of using for_each_entry_[safe].
Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso
Manfred Spraul
Paul McQuade
Mathias Krause
Linus Torvalds
Michael Kerrisk
Heiko Carstens
H. Peter Anvin
Mateusz Guzik
Rafael Aquini
Petr Mladek
Jesper Nilsson
Greg Thelen
Xie XiuQi
J. Bruce Fields
Davidlohr Bueso
Eric W. Biederman
Svenning Sørensen
Andrew Morton
Jeff Layton
Li Zefan
Rik van Riel
Naoya Horiguchi
Al Viro
David Howells
Robin Holt
Nikola Pajkovsky