ceph_atomic_open() calls ceph_open() after receiving the MDS reply.
ceph_open() grabs an extra open file reference. (The open request
already holds an open file reference)
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Preallocate buffer for readdir reply. Limit number of entries in
readdir reply according to the buffer size.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Announce our support for osdmaps with non-default primary affinity
values.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reimplement ceph_calc_pg_primary() in terms of ceph_calc_pg_acting()
and get rid of the now unused calc_pg_raw().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Respond to non-default primary_affinity values accordingly. (Primary
affinity allows the admin to shift 'primary responsibility' away from
specific osds, effectively shifting around the read side of the
workload and whatever overhead is incurred by peering and writes by
virtue of being the primary).
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Change apply_temp() to override primary in the same way pg_temp
overrides osd set. primary_temp overrides pg_temp primary too.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
In preparation for adding support for primary_temp, stop assuming
primaryness: add a primary out parameter to ceph_calc_pg_acting() and
change call sites accordingly. Primary is now specified separately
from the order of osds in the set.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Switch ceph_calc_pg_acting() to new helpers: pg_to_raw_osds(),
raw_to_up_osds() and apply_temps().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
apply_temp() helper for applying various temporary mappings (at this
point only pg_temp mappings) to the up set, therefore transforming it
into an acting set.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
pg_to_raw_osds() helper for computing a raw (crush) set, which can
contain non-existant and down osds.
raw_to_up_osds() helper for pruning non-existant and down osds from the
raw set, therefore transforming it into an up set, and determining up
primary.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Bring in pg_pool_t::can_shift_osds() counterpart along with pool type
defines.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Sync up with ceph.git definitions. Bring in ceph_osd_is_down().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Announce our support for "new" (v7 - split and separately versioned
client and osd sections) osdmap enconding.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Add two helpers to decode primary_affinity (full map, vector<u32>) and
new_primary_affinity (inc map, map<u32, u32>) and switch to them.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Add primary_affinity infrastructure. primary_affinity values are
stored in an max_osd-sized array, hanging off ceph_osdmap, similar to
a osd_weight array.
Introduce {get,set}_primary_affinity() helpers, primarily to return
CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to
abstract out osd_primary_affinity array allocation and initialization.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Add a common helper to decode both primary_temp (full map, map<pg_t,
u32>) and new_primary_temp (inc map, same) and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Add primary_temp mappings infrastructure. struct ceph_pg_mapping is
overloaded, primary_temp mappings are stored in an rb-tree, rooted at
ceph_osdmap, in a manner similar to pg_temp mappings.
Dump primary_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'primary_temp <pgid> <osd>' per line, e.g:
primary_temp 2.6 4
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
In preparation for adding support for primary_temp mappings, generalize
struct ceph_pg_mapping so it can hold mappings other than pg_temp.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Full and incremental osdmaps are structured identically and have
identical headers. Add a helper to decode both "old" (16-bit version,
v6) and "new" (8-bit struct_v+struct_compat+struct_len, v7) osdmap
enconding headers and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Consolidate pg_temp (full map, map<pg_t, vector<u32>>) and new_pg_temp
(inc map, same) decoding logic into a common helper and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Use krealloc() instead of rolling our own. (krealloc() with a NULL
first argument acts as a kmalloc()). Properly initalize the new array
elements. This is needed to make future additions to osdmap easier.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Consolidate pools (full map, map<u64, pg_pool_t>) and new_pools (inc
map, same) decoding logic into a common helper and switch to it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
To be in line with all the other osdmap decode helpers.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Sum up sizeof(...) results instead of (incorrectly) hard-coding the
number of bytes, expressed in ints and longs.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Only version 6 of osdmap encoding is supported, anything other than
version 6 results in an error and halts the decoding process. Checking
if version is >= 5 is therefore bogus.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro. This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset. Follow osdmap_decode() and fix this by adding
a special e_inval label to be used by all ceph_decode_* macros.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The size of the memory area feeded to crush_decode() should be limited
not only by osdmap end, but also by the crush map length. Also, drop
unnecessary dout() (dout() in crush_decode() conveys the same info) and
step past crush map only if it is decoded successfully.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Check length of osd_state, osd_weight and osd_addr arrays. They
should all have exactly max_osd elements after the call to
osdmap_set_max_osd().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
max_osd value is not covered by any ceph_decode_need(). Use a safe
version of ceph_decode_* macro to decode it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro. This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset. Fix this by adding a special e_inval label to
be used by all ceph_decode_* macros.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Split osdmap allocation and initialization into a separate function,
ceph_osdmap_decode().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Dump osdmap in hex on both full and incremental decode errors, to make
it easier to match the contents with error offset. dout() map epoch
and max_osd value on success.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
To save screen space in anticipation of more fields (e.g. primary
affinity).
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Add TUNABLES3 feature (chooseleaf_vary_r tunable) to a set of features
supported by default.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This lets you adjust the vary_r tunable on a per-rule basis.
Reflects ceph.git commit f944ccc20aee60a7d8da7e405ec75ad1cd449fac.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The current crush_choose_firstn code will re-use the same 'r' value for
the recursive call. That means that if we are hitting a collision or
rejection for some reason (say, an OSD that is marked out) and need to
retry, we will keep making the same (bad) choice in that recursive
selection.
Introduce a tunable that fixes that behavior by incorporating the parent
'r' value into the recursive starting point, so that a different path
will be taken in subsequent placement attempts.
Note that this was done from the get-go for the new crush_choose_indep
algorithm.
This was exposed by a user who was seeing PGs stuck in active+remapped
after reweight-by-utilization because the up set mapped to a single OSD.
Reflects ceph.git commit a8e6c9fbf88bad056dd05d3eb790e98a5e43451a.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
These two fields are misnomers; they are *retry* counts.
Reflects ceph.git commit f17caba8ae0cad7b6f8f35e53e5f73b444696835.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Back in 27f4d1f6bc32c2ed7b2c5080cbd58b14df622607 we refactored the CRUSH
code to allow adjustment of the retry counts on a per-pool basis. That
commit had an off-by-one bug: the previous "tries" counter was a *retry*
count, not a *try* count, but the new code was passing in 1 meaning
there should be no retries.
Fix the ftotal vs tries comparison to use < instead of <= to fix the
problem. Note that the original code used <= here, which means the
global "choose_total_tries" tunable is actually counting retries.
Compensate for that by adding 1 in crush_do_rule when we pull the tunable
into the local variable.
This was noticed looking at output from a user provided osdmap.
Unfortunately the map doesn't illustrate the change in mapping behavior
and I haven't managed to construct one yet that does. Inspection of the
crush debug output now aligns with prior versions, though.
Reflects ceph.git commit 795704fd615f0b008dcc81aa088a859b2d075138.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If buffer size is zero, return the size of layout vxattr. If buffer
size is not zero, check if it is large enough for layout vxattr.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
send_mds_reconnect() may call discard_cap_releases() after all
release messages have been dropped by cleanup_cap_releases()
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
When there is no more data, ceph_msg_data_{pages,pagelist}_advance()
should not move on to the next page.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
When adjusting caps client wants, MDS does not record caps that are
not allowed. For non-auth MDS, it does not record WR caps. So when
a MDS reply changes a non-auth cap to auth cap, client needs to set
cap's mds_wanted according to the reply.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
flock and posix lock should use fl->fl_file instead of process ID
as owner identifier. (posix lock uses fl->fl_owner. fl->fl_owner
is usually equal to fl->fl_file, but it also can be a customized
value). The process ID of who holds the lock is just for F_GETLK
fcntl(2).
The fix is rename the 'pid' fields of struct ceph_mds_request_args
and struct ceph_filelock to 'owner', rename 'pid_namespace' fields
to 'pid'. Assign fl->fl_file to the 'owner' field of lock messages.
We also set the most significant bit of the 'owner' field. MDS can
use that bit to distinguish between old and new clients.
The MDS counterpart of this patch modifies the flock code to not
take the 'pid_namespace' into consideration when checking conflict
locks.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Yan, Zheng
Ilya Dryomov
Fabian Frederick