Граф коммитов

155 Коммитов

Автор SHA1 Сообщение Дата
Trond Myklebust da45828e28 SUNRPC: Clean up soft task error handling
- Ensure that the task aborts the RPC call only when it has actually timed out.
 - Ensure that req->rq_majortimeo is initialised correctly.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:25:00 -04:00
Trond Myklebust 76303992b4 SUNRPC: Handle ENETUNREACH, EHOSTUNREACH and EHOSTDOWN socket errors
In case of any of the above errors occuring, delay for 3 seconds, then
handle as if it were a timeout error.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:56 -04:00
Chuck Lever b86acd501a SUNRPC: export new RPC client functions with _GPL
This patch is optional.

It has been suggested that the RPC client internal functions used by upper
layer protocols (such as NFS) be exported via EXPORT_SYMBOL_GPL.  This
patch does that.

Test plan:
Compile kernel with CONFIG_NFS enabled as a module.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:51 -04:00
Chuck Lever ff9aa5e56d SUNRPC: Eliminate xprt_create_proto and rpc_create_client
The two function call API for creating a new RPC client is now obsolete.
Remove it.

Also, remove an unnecessary check to see whether the caller is capable of
using privileged network services.  The kernel RPC client always uses a
privileged ephemeral port by default; callers are responsible for checking
the authority of users to make use of any RPC service, or for specifying
that a nonprivileged port is acceptable.

Test plan:
Repeated runs of Connectathon locking suite.  Check network trace to ensure
correctness of NLM requests and replies.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:51 -04:00
Chuck Lever c2866763b4 SUNRPC: use sockaddr + size when creating remote transport endpoints
Prepare for more generic transport endpoint handling needed by transports
that might use different forms of addressing, such as IPv6.

Introduce a single function call to replace the two-call
xprt_create_proto/rpc_create_client API.  Define a new rpc_create_args
structure that allows callers to pass in remote endpoint addresses of
varying length.

Test-plan:
Compile kernel with CONFIG_NFS enabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:49 -04:00
Chuck Lever c4efcb1d3e SUNRPC: Use "sockaddr_storage" for storing RPC client's remote peer address
IPv6 addresses are big (128 bytes).  Now that no RPC client consumers treat
the addr field in rpc_xprt structs as an opaque, and access it only via the
API calls, we can safely widen the field in the rpc_xprt struct to
accomodate larger addresses.

Test plan:
Compile kernel with CONFIG_NFS enabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:48 -04:00
Chuck Lever f425eba437 SUNRPC: Create API for displaying remote peer address
Provide an API for formatting the remote peer address for printing without
exposing its internal structure.  The address could be dynamic, so we
support a function call to get the address rather than reading it straight
out of a structure.

Test-plan:
Destructive testing (unplugging the network temporarily).  Probably need
to rig a server where certain services aren't running, or that returns an
error for some typical operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:48 -04:00
Chuck Lever ed39440a25 SUNRPC: create API for getting remote peer address
Provide an API for retrieving the remote peer address without allowing
direct access to the rpc_xprt struct.

Test-plan:
Compile kernel with CONFIG_NFS enabled.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:45 -04:00
Chuck Lever bbf7c1dd2a SUNRPC: Introduce transport switch callout for pluggable rpcbind
Introduce a clean transport switch API for plugging in different types of
rpcbind mechanisms.  For instance, rpcbind can cleanly replace the
existing portmapper client, or a transport can choose to implement RPC
binding any way it likes.

Test plan:
Destructive testing (unplugging the network temporarily).  Connectathon
with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
Probably need to rig a server where certain services aren't running, or
that returns an error for some typical operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:44 -04:00
Chuck Lever 4a68179d38 SUNRPC: Make RPC portmapper use per-transport storage
Move connection and bind state that was maintained in the rpc_clnt
structure to the rpc_xprt structure.  This will allow the creation of
a clean API for plugging in different types of bind mechanisms.

This brings improvements such as the elimination of a single spin lock to
control serialization for all in-kernel RPC binding.  A set of per-xprt
bitops is used to serialize tasks during RPC binding, just like it now
works for making RPC transport connections.

Test-plan:
Destructive testing (unplugging the network temporarily).  Connectathon
with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
Probably need to rig a server where certain services aren't running, or
that returns an error for some typical operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:39 -04:00
Chuck Lever ec739ef03d SUNRPC: Create a helper to tell whether a transport is bound
Hide the contents and format of xprt->addr by eliminating direct uses
of the xprt->addr.sin_port field.  This change is required to support
alternate RPC host address formats (eg IPv6).

Test-plan:
Destructive testing (unplugging the network temporarily).  Repeated runs of
Connectathon locking suite with UDP and TCP.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-09-22 23:24:39 -04:00
David Howells e8896495bc NFS: Check lengths more thoroughly in NFS4 readdir XDR decode
Check the bounds of length specifiers more thoroughly in the XDR decoding of
NFS4 readdir reply data.

Currently, if the server returns a bitmap or attr length that causes the
current decode point pointer to wrap, this could go undetected (consider a
small "negative" length on a 32-bit machine).

Also add a check into the main XDR decode handler to make sure that the amount
of data is a multiple of four bytes (as specified by RFC-1014).  This makes
sure that we can do u32* pointer subtraction in the NFS client without risking
an undefined result (the result is undefined if the pointers are not correctly
aligned with respect to one another).

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 5861fddd64a7eaf7e8b1a9997455a24e7f688092 commit)
2006-08-24 15:53:34 -04:00
Trond Myklebust 8f8e7a50f4 SUNRPC: Fix dentry refcounting issues with users of rpc_pipefs
rpc_unlink() and rpc_rmdir() will dput the dentry reference for you.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from a05a57effa71a1f67ccbfc52335c10c8b85f3f6a commit)
2006-08-24 15:50:51 -04:00
Trond Myklebust dff02cc1a3 NFS: clean up rpc_rmdir
Make it take a dentry argument instead of a path

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 648d4116eb2509f010f7f34704a650150309b3e7 commit)
2006-08-24 15:50:32 -04:00
Trond Myklebust e0ab53deaa RPC: Ensure that we disconnect TCP socket when client requests error out
If we're part way through transmitting a TCP request, and the client
errors, then we need to disconnect and reconnect the TCP socket in order to
avoid confusing the server.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 031a50c8b9ea82616abd4a4e18021a25848941ce commit)
2006-08-03 16:56:55 -04:00
Panagiotis Issaris 0da974f4f3 [NET]: Conversions from kmalloc+memset to k(z|c)alloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:51:30 -07:00
Trond Myklebust 7a1218a277 SUNRPC: Ensure rpc_call_async() always calls tk_ops->rpc_release()
Currently this will not happen if we exit before rpc_new_task() was called.
Also fix up rpc_run_task() to do the same (for consistency).

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 18:11:10 -05:00
Trond Myklebust 43ac3f2961 SUNRPC: Fix memory barriers for req->rq_received
We need to ensure that all writes to the XDR buffers are done before
req->rq_received is visible to other processors.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:51 -05:00
Trond Myklebust 5428154827 SUNRPC: Fix a 'Busy inodes' error in rpc_pipefs
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:49 -05:00
Chuck Lever 11c556b3d8 SUNRPC: provide a mechanism for collecting stats in the RPC client
Add a simple mechanism for collecting stats in the RPC client.  Stats are
tabulated during xprt_release.  Note that per_cpu shenanigans are not
required here because the RPC client already serializes on the transport
write lock.

Test plan:
Compile kernel with CONFIG_NFS enabled.  Basic performance regression
testing with high-speed networking and high performance server.

Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:22 -05:00
Chuck Lever ef759a2e54 SUNRPC: introduce per-task RPC iostats
Account for various things that occur while an RPC task is executed.
Separate timers for RPC round trip and RPC execution time show how
long RPC requests wait in queue before being sent.  Eventually these
will be accumulated at xprt_release time in one place where they can
be viewed from userland.

Test plan:
Compile kernel with CONFIG_NFS enabled.

Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:17 -05:00
Levent Serinol 1356b8c28d SUNRPC: more verbose output for rpc auth weak error
This patch adds server ip address to be printed out when "server
requires stronger authentication" error occured.

Signed-off-by: Levent Serinol <lserinol@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:11 -05:00
Trond Myklebust 12de3b35ea SUNRPC: Ensure that rpc_mkpipe returns a refcounted dentry
If not, we cannot guarantee that idmap->idmap_dentry, gss_auth->dentry and
clnt->cl_dentry are valid dentries.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:09 -05:00
Adrian Bunk 712917d1c0 [PATCH] SUNRPC: fix a NULL pointer dereference in net/sunrpc/clnt.c
The Coverity checker spotted this possible NULL pointer dereference in
rpc_new_client().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-14 07:57:17 -08:00
Kris Katterjohn 8b3a70058b [NET]: Remove more unneeded typecasts on *malloc()
This removes more unneeded casts on the return value for kmalloc(),
sock_kmalloc(), and vmalloc().

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-11 16:32:14 -08:00
Linus Torvalds 4f47707b05 Fix rpc shutdown event condition bug
We want to wait for the cl_users to go down to zero, not for it to stay
positive.  Quoth Trond (who wasn't even the author, but acked the wrong
version): "Argh! I need to increase my daily caffeine dosages."

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:56:39 -08:00
Ingo Molnar 532347e2bb [PATCH] nfs: sleep_on() removal
Convert sleep_on() to wait_event_timeout().  Probably safe with the BKL but
could be racy once BKL use in NFS-client is gone.

Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:42 -08:00
Chuck Lever f518e35aec SUNRPC: get rid of cl_chatty
Clean up: Every ULP that uses the in-kernel RPC client, except the NLM
 client, sets cl_chatty.  There's no reason why NLM shouldn't set it, so
 just get rid of cl_chatty and always be verbose.

 Test-plan:
 Compile with CONFIG_NFS enabled.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:56 -05:00
Chuck Lever 35f5a422ce SUNRPC: new interface to force an RPC rebind
We'd like to hide fields in rpc_xprt and rpc_clnt from upper layer protocols.
 Start by creating an API to force RPC rebind, replacing logic that simply
 sets cl_port to zero.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.  NFSv2/3 and NFSv4 mounting should be carefully checked.
 Probably need to rig a server where certain services aren't running, or
 that returns an error for some typical operation.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:56 -05:00
Chuck Lever 0210714834 SUNRPC: switchable buffer allocation
Add RPC client transport switch support for replacing buffer management
 on a per-transport basis.

 In the current IPv4 socket transport implementation, RPC buffers are
 allocated as needed for each RPC message that is sent.  Some transport
 implementations may choose to use pre-allocated buffers for encoding,
 sending, receiving, and unmarshalling RPC messages, however.  For
 transports capable of direct data placement, the buffers can be carved
 out of a pre-registered area of memory rather than from a slab cache.

 Test-plan:
 Millions of fsx operations.  Performance characterization with "sio" and
 "iozone".  Use oprofile and other tools to look for significant regression
 in CPU utilization.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:55 -05:00
Trond Myklebust 2bd615797e SUNRPC: Ensure that SIGKILL will always terminate a synchronous RPC call.
...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to
 interrupt RPC calls too (as per the Solaris implementation).

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:45 -05:00
Trond Myklebust e60859ac0e SUNRPC: rpc_execute should not return task->tk_status;
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:42 -05:00
Trond Myklebust 963d8fe533 RPC: Clean up RPC task structure
Shrink the RPC task structure. Instead of storing separate pointers
 for task->tk_exit and task->tk_release, put them in a structure.

 Also pass the user data pointer as a parameter instead of passing it via
 task->tk_calldata. This enables us to nest callbacks.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:39 -05:00
Trond Myklebust abbcf28f23 SUNRPC: Yet more RPC cleanups
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:39 -05:00
Trond Myklebust 940e3318c3 [PATCH] SUNRPC: don't reencode when looping in call transmit.
If the call to xprt_transmit() fails due to socket buffer space
exhaustion, we do not need to re-encode the RPC message when we
loop back through call_transmit.

Re-encoding can actually end up triggering the WARN_ON() in
call_decode() if we re-encode something like a read() request and
auth->au_rslack has changed.
It can also cause us to increment the RPCSEC_GSS sequence number
beyond the limits of the allowed window.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 19:31:33 -08:00
J. Bruce Fields f3680312a7 SUNRPC: Retry wrap in case of memory allocation failure.
For privacy we need to allocate extra pages to hold encrypted page data when
 wrapping requests.  This allocation may fail, and we handle that case by
 waiting and retrying.

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18 23:19:43 -07:00
Trond Myklebust 5e5ce5be6f RPC: allow call_encode() to delay transmission of an RPC call.
Currently, call_encode will cause the entire RPC call to abort if it returns
 an error. This is unnecessarily rigid, and gets in the way of attempts
 to allow the NFSv4 layer to order RPC calls that carry sequence ids.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18 14:20:11 -07:00
Chuck Lever ea635a517e SUNRPC: Retry rpcbind requests if the server's portmapper isn't up
After a server crash/reboot, rebinding should always retry, otherwise
 requests on "hard" mounts will fail when they shouldn't.

 Test plan:
 Run a lock-intensive workload against a server while rebooting the server
 repeatedly.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-10-18 14:20:10 -07:00
Trond Myklebust f134585a73 Revert "[PATCH] RPC,NFS: new rpc_pipefs patch"
This reverts 17f4e6febca160a9f9dd4bdece9784577a2f4524 commit.
2005-09-23 12:39:00 -04:00
Christoph Hellwig 278c995c8a [PATCH] RPC,NFS: new rpc_pipefs patch
Currently rpc_mkdir/rpc_rmdir and rpc_mkpipe/mk_unlink have an API that's
 a little unfortunate.  They take a path relative to the rpc_pipefs root and
 thus need to perform a full lookup.  If you look at debugfs or usbfs they
 always store the dentry for directories they created and thus can pass in
 a dentry + single pathname component pair into their equivalents of the
 above functions.

 And in fact rpc_pipefs actually stores a dentry for all but one component so
 this change not only simplifies the core rpc_pipe code but also the callers.

 Unfortuntately this code path is only used by the NFS4 idmapper and
 AUTH_GSSAPI for which I don't have a test enviroment.  Could someone give
 it a spin?  It's the last bit needed before we can rework the
 lookup_hash API

 Signed-off-by: Christoph Hellwig <hch@lst.de>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:57 -04:00
Chuck Lever 470056c288 [PATCH] RPC: rationalize set_buffer_size
In fact, ->set_buffer_size should be completely functionless for non-UDP.

 Test-plan:
 Check socket buffer size on UDP sockets over time.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:55 -04:00
Chuck Lever 03bf4b707e [PATCH] RPC: parametrize various transport connect timeouts
Each transport implementation can now set unique bind, connect,
 reestablishment, and idle timeout values.  These are variables,
 allowing the values to be modified dynamically.  This permits
 exponential backoff of any of these values, for instance.

 As an example, we implement exponential backoff for the connection
 reestablishment timeout.

 Test-plan:
 Destructive testing (unplugging the network temporarily).  Connectathon
 with UDP and TCP.

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:53 -04:00
Chuck Lever 808012fbb2 [PATCH] RPC: skip over transport-specific heads automatically
Add a generic mechanism for skipping over transport-specific headers
 when constructing an RPC request.  This removes another "xprt->stream"
 dependency.

 Test-plan:
 Write-intensive workload on a single mount point (try both UDP and
 TCP).

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:33 -04:00
Chuck Lever 55aa4f58aa [PATCH] RPC: client-side transport switch cleanup
Clean-up: change some comments to reflect the realities of the new RPC
 transport switch mechanism.  Get rid of unused xprt_receive() prototype.

 Also, organize function prototypes in xprt.h by usage and scope.

 Test-plan:
 Compile kernel with CONFIG_NFS enabled.

 Version: Thu, 11 Aug 2005 16:07:21 -0400

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:26 -04:00
Chuck Lever 86b9f57dfd [PATCH] RPC: Eliminate socket.h includes in RPC client
Clean-up: get rid of unnecessary socket.h and in.h includes in the generic
 parts of the RPC client.

 Test-plan:
 Compile kernel with CONFIG_NFS enabled.

 Version: Thu, 11 Aug 2005 16:06:23 -0400

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:23 -04:00
Chuck Lever a246b0105b [PATCH] RPC: introduce client-side transport switch
Move the bulk of client-side socket-specific code into a separate source
 file, net/sunrpc/xprtsock.c.

 Test-plan:
 Millions of fsx operations.  Performance characterization such as "sio" or
 "iozone".  Destructive testing (unplugging the network temporarily, server
 reboots).  Connectathon with v2, v3, and v4.

 Version: Thu, 11 Aug 2005 16:03:38 -0400

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:12 -04:00
Chuck Lever da35187801 [PATCH] RPC: proper soft timeout behavior for rpcbind
Implement a best practice:  for soft mounts, an rpcbind timeout should
 cause an RPC request to fail.

 This also provides an FSM hook for retrying an rpcbind with a different
 rpcbind protocol version.  We'll use this later to try multiple rpcbind
 protocol versions when binding.  To enable this, expose the RPC error
 code returned during a portmap request to the FSM so it can make some
 decision about how to report, retry, or fail the request.

 Test-plan:
 Hundreds of passes with connectathon NFSv3 locking suite, on the client
 and server.

 Version: Thu, 11 Aug 2005 16:01:53 -0400

 Signed-off-by: Chuck Lever <cel@netapp.com>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23 12:38:04 -04:00
Trond Myklebust 14b218a8e4 [PATCH] RPC: Ensure rpc calls respects the RPC_NOINTR flag
For internal purposes, the rpc_clnt_sigmask() call is replaced by
 a call to rpc_task_sigmask(), which ensures that the current task
 sigmask respects both the client cl_intr flag and the per-task NOINTR flag.

 Problem noted by Jiaying Zhang.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:30 -04:00
Andreas Gruenbacher 007e251f2b [PATCH] RPC: Allow multiple RPC client programs to share the same transport
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
 Acked-by: Olaf Kirch <okir@suse.de>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:18 -04:00
Andreas Gruenbacher cdf477068e [PATCH] RPC: Return -EPFNOSUPPORT for RPC programs that are unavailable
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
 Signed-off-by: Olaf Kirch <okir@suse.de>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:17 -04:00
J. Bruce Fields 6a19275ada [PATCH] RPC: [PATCH] improve rpcauthauth_create error returns
Currently we return -ENOMEM for every single failure to create a new auth.
 This is actually accurate for auth_null and auth_unix, but for auth_gss it's a
 bit confusing.

 Allow rpcauth_create (and the ->create methods) to return errors.  With this
 patch, the user may sometimes see an EINVAL instead.  Whee.

 Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:16 -04:00
Trond Myklebust 5ee0ed7d3a [PATCH] RPC: Make rpc_create_client() probe server for RPC program+version support
Ensure that we don't create an RPC client without checking that the server
 does indeed support the RPC program + version that we are trying to set up.

 This enables us to immediately return an error to "mount" if it turns out
 that the server is only supporting NFSv2, when we requested NFSv3 or NFSv4.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:04 -04:00
Trond Myklebust 5b616f5d59 [PATCH] RPC: Make rpc_create_client() destroy the transport on failure.
This saves us a couple of lines of cleanup code for each call.

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:03 -04:00
Trond Myklebust 334ccfd545 [PATCH] RPC: Ensure XDR iovec length is initialized correctly in call_header
Fix up call_header() so that it calls xdr_adjust_iovec().
 Fix calculation of the scratch buffer length in xdr_init_encode().

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-06-22 16:07:02 -04:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00