Граф коммитов

715 Коммитов

Автор SHA1 Сообщение Дата
Christoph Hellwig 265de8ce3d jffs2: pass the correct prototype to read_cache_page
Fix the callback jffs2 passes to read_cache_page to actually have the
proper type expected.  Casting around function pointers can easily hide
typing bugs, and defeats control flow protection.

Link: http://lkml.kernel.org/r/20190520055731.24538-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 11:05:43 -07:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds b4b52b881c Wimplicit-fallthrough patches for 5.2-rc1
Hi Linus,
 
 This is my very first pull-request.  I've been working full-time as
 a kernel developer for more than two years now. During this time I've
 been fixing bugs reported by Coverity all over the tree and, as part
 of my work, I'm also contributing to the KSPP. My work in the kernel
 community has been supervised by Greg KH and Kees Cook.
 
 OK. So, after the quick introduction above, please, pull the following
 patches that mark switch cases where we are expecting to fall through.
 These patches are part of the ongoing efforts to enable -Wimplicit-fallthrough.
 They have been ignored for a long time (most of them more than 3 months,
 even after pinging multiple times), which is the reason why I've created
 this tree. Most of them have been baking in linux-next for a whole development
 cycle. And with Stephen Rothwell's help, we've had linux-next nag-emails
 going out for newly introduced code that triggers -Wimplicit-fallthrough
 to avoid gaining more of these cases while we work to remove the ones
 that are already present.
 
 I'm happy to let you know that we are getting close to completing this
 work.  Currently, there are only 32 of 2311 of these cases left to be
 addressed in linux-next.  I'm auditing every case; I take a look into
 the code and analyze it in order to determine if I'm dealing with an
 actual bug or a false positive, as explained here:
 
 https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/
 
 While working on this, I've found and fixed the following missing
 break/return bugs, some of them introduced more than 5 years ago:
 
 84242b82d8
 7850b51b6c
 5e420fe635
 09186e5034
 b5be853181
 7264235ee7
 cc5034a5d2
 479826cc86
 5340f23df8
 df997abeeb
 2f10d82373
 307b00c5e6
 5d25ff7a54
 a7ed5b3e7d
 c24bfa8f21
 ad0eaee619
 9ba8376ce1
 dc586a60a1
 a8e9b186f1
 4e57562b48
 60747828ea
 c5b974bee9
 cc44ba9116
 2c930e3d0a
 
 Once this work is finish, we'll be able to universally enable
 "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
 entering the kernel again.
 
 Thanks
 
 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAlzQR2IACgkQRwW0y0cG
 2zEJbQ//X930OcBtT/9DRW4XL1Jeq0Mjssz/GLX2Vpup5CwwcTROG65no80Zezf/
 yQRWnUjGX0OBv/fmUK32/nTxI/7k7NkmIXJHe0HiEF069GEENB7FT6tfDzIPjU8M
 qQkB8NsSUWJs3IH6BVynb/9MGE1VpGBDbYk7CBZRtRJT1RMM+3kQPucgiZMgUBPo
 Yd9zKwn4i/8tcOCli++EUdQ29ukMoY2R3qpK4LftdX9sXLKZBWNwQbiCwSkjnvJK
 I6FDiA7RaWH2wWGlL7BpN5RrvAXp3z8QN/JZnivIGt4ijtAyxFUL/9KOEgQpBQN2
 6TBRhfTQFM73NCyzLgGLNzvd8awem1rKGSBBUvevaPbgesgM+Of65wmmTQRhFNCt
 A7+e286X1GiK3aNcjUKrByKWm7x590EWmDzmpmICxNPdt5DHQ6EkmvBdNjnxCMrO
 aGA24l78tBN09qN45LR7wtHYuuyR0Jt9bCmeQZmz7+x3ICDHi/+Gw7XPN/eM9+T6
 lZbbINiYUyZVxOqwzkYDCsdv9+kUvu3e4rPs20NERWRpV8FEvBIyMjXAg6NAMTue
 K+ikkyMBxCvyw+NMimHJwtD7ho4FkLPcoeXb2ZGJTRHixiZAEtF1RaQ7dA05Q/SL
 gbSc0DgLZeHlLBT+BSWC2Z8SDnoIhQFXW49OmuACwCUC68NHKps=
 =k30z
 -----END PGP SIGNATURE-----

Merge tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull Wimplicit-fallthrough updates from Gustavo A. R. Silva:
 "Mark switch cases where we are expecting to fall through.

  This is part of the ongoing efforts to enable -Wimplicit-fallthrough.

  Most of them have been baking in linux-next for a whole development
  cycle. And with Stephen Rothwell's help, we've had linux-next
  nag-emails going out for newly introduced code that triggers
  -Wimplicit-fallthrough to avoid gaining more of these cases while we
  work to remove the ones that are already present.

  We are getting close to completing this work. Currently, there are
  only 32 of 2311 of these cases left to be addressed in linux-next. I'm
  auditing every case; I take a look into the code and analyze it in
  order to determine if I'm dealing with an actual bug or a false
  positive, as explained here:

      https://lore.kernel.org/lkml/c2fad584-1705-a5f2-d63c-824e9b96cf50@embeddedor.com/

  While working on this, I've found and fixed the several missing
  break/return bugs, some of them introduced more than 5 years ago.

  Once this work is finished, we'll be able to universally enable
  "-Wimplicit-fallthrough" to avoid any of these kinds of bugs from
  entering the kernel again"

* tag 'Wimplicit-fallthrough-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits)
  memstick: mark expected switch fall-throughs
  drm/nouveau/nvkm: mark expected switch fall-throughs
  NFC: st21nfca: Fix fall-through warnings
  NFC: pn533: mark expected switch fall-throughs
  block: Mark expected switch fall-throughs
  ASN.1: mark expected switch fall-through
  lib/cmdline.c: mark expected switch fall-throughs
  lib: zstd: Mark expected switch fall-throughs
  scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through
  scsi: sym53c8xx_2: sym_hipd: mark expected switch fall-throughs
  scsi: ppa: mark expected switch fall-through
  scsi: osst: mark expected switch fall-throughs
  scsi: lpfc: lpfc_scsi: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_nvme: Mark expected switch fall-through
  scsi: lpfc: lpfc_nportdisc: Mark expected switch fall-through
  scsi: lpfc: lpfc_hbadisc: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_els: Mark expected switch fall-throughs
  scsi: lpfc: lpfc_ct: Mark expected switch fall-throughs
  scsi: imm: mark expected switch fall-throughs
  scsi: csiostor: csio_wr: mark expected switch fall-through
  ...
2019-05-07 12:48:10 -07:00
Al Viro db0bd7b719 jffs2: switch to ->free_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-01 22:43:25 -04:00
Gustavo A. R. Silva 0a4c92657f fs: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warnings:

fs/affs/affs.h:124:38: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1692:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1694:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ceph/file.c:249:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:618:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:620:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/btrfs/ref-verify.c:522:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:711:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:722:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/jffs2/fs.c:339:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/nfsd/nfs4proc.c:429:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:62:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:43:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/fcntl.c:770:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/seq_file.c:319:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:148:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:150:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/signalfd.c:178:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/locks.c:1473:16: warning: this statement may fall through [-Wimplicit-fallthrough=]

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-04-08 18:21:02 -05:00
Al Viro 4fdcfab5b5 jffs2: fix use-after-free on symlink traversal
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-01 00:31:02 -04:00
Daniel Santos a788c52727 jffs2: Fix use of uninitialized delayed_work, lockdep breakage
jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER
is defined then a write buffer is available and has been initialized.
However, this does is not the case when the mtd device has no
out-of-band buffer:

int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
{
        if (!c->mtd->oobsize)
                return 0;
...

The resulting call to cancel_delayed_work_sync passing a uninitialized
(but zeroed) delayed_work struct forces lockdep to become disabled.

[   90.050639] overlayfs: upper fs does not support tmpfile.
[   90.652264] INFO: trying to register non-static key.
[   90.662171] the code is fine but needs lockdep annotation.
[   90.673090] turning off the locking correctness validator.
[   90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0
[   90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7
[   90.713349]         80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff
[   90.730020]         00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420
[   90.746690]         6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90
[   90.763362]         80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000
[   90.780033]         ...
[   90.784902] Call Trace:
[   90.789793] [<8000f0d8>] show_stack+0xb8/0x148
[   90.798659] [<8005a000>] register_lock_class+0x270/0x55c
[   90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c
[   90.818964] [<8005e314>] lock_acquire+0x194/0x1dc
[   90.828345] [<8003f27c>] flush_work+0x200/0x24c
[   90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210
[   90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54
[   90.857173] [<80125cf4>] iterate_supers+0xf4/0x120
[   90.866729] [<80158fc4>] sys_sync+0x44/0x9c
[   90.875067] [<80014424>] syscall_common+0x34/0x58

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-12-02 09:20:34 +01:00
Linus Torvalds ba9f6f8954 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "I have been slowly sorting out siginfo and this is the culmination of
  that work.

  The primary result is in several ways the signal infrastructure has
  been made less error prone. The code has been updated so that manually
  specifying SEND_SIG_FORCED is never necessary. The conversion to the
  new siginfo sending functions is now complete, which makes it
  difficult to send a signal without filling in the proper siginfo
  fields.

  At the tail end of the patchset comes the optimization of decreasing
  the size of struct siginfo in the kernel from 128 bytes to about 48
  bytes on 64bit. The fundamental observation that enables this is by
  definition none of the known ways to use struct siginfo uses the extra
  bytes.

  This comes at the cost of a small user space observable difference.
  For the rare case of siginfo being injected into the kernel only what
  can be copied into kernel_siginfo is delivered to the destination, the
  rest of the bytes are set to 0. For cases where the signal and the
  si_code are known this is safe, because we know those bytes are not
  used. For cases where the signal and si_code combination is unknown
  the bits that won't fit into struct kernel_siginfo are tested to
  verify they are zero, and the send fails if they are not.

  I made an extensive search through userspace code and I could not find
  anything that would break because of the above change. If it turns out
  I did break something it will take just the revert of a single change
  to restore kernel_siginfo to the same size as userspace siginfo.

  Testing did reveal dependencies on preferring the signo passed to
  sigqueueinfo over si->signo, so bit the bullet and added the
  complexity necessary to handle that case.

  Testing also revealed bad things can happen if a negative signal
  number is passed into the system calls. Something no sane application
  will do but something a malicious program or a fuzzer might do. So I
  have fixed the code that performs the bounds checks to ensure negative
  signal numbers are handled"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
  signal: Guard against negative signal numbers in copy_siginfo_from_user32
  signal: Guard against negative signal numbers in copy_siginfo_from_user
  signal: In sigqueueinfo prefer sig not si_signo
  signal: Use a smaller struct siginfo in the kernel
  signal: Distinguish between kernel_siginfo and siginfo
  signal: Introduce copy_siginfo_from_user and use it's return value
  signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
  signal: Fail sigqueueinfo if si_signo != sig
  signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
  signal/unicore32: Use force_sig_fault where appropriate
  signal/unicore32: Generate siginfo in ucs32_notify_die
  signal/unicore32: Use send_sig_fault where appropriate
  signal/arc: Use force_sig_fault where appropriate
  signal/arc: Push siginfo generation into unhandled_exception
  signal/ia64: Use force_sig_fault where appropriate
  signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
  signal/ia64: Use the generic force_sigsegv in setup_frame
  signal/arm/kvm: Use send_sig_mceerr
  signal/arm: Use send_sig_fault where appropriate
  signal/arm: Use force_sig_fault where appropriate
  ...
2018-10-24 11:22:39 +01:00
Hou Tao 92e2921f7e jffs2: free jffs2_sb_info through jffs2_kill_sb()
When an invalid mount option is passed to jffs2, jffs2_parse_options()
will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will
be used (use-after-free) and freeed (double-free) in jffs2_kill_sb().

Fix it by removing the buggy invocation of kfree() when getting invalid
mount options.

Fixes: 92abc475d8 ("jffs2: implement mount option parsing and compression overriding")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-10-16 10:34:28 +02:00
Eric W. Biederman 961366a019 signal: Remove the siginfo paramater from kernel_dqueue_signal
None of the callers use the it so remove it.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-11 21:19:14 +02:00
Arnd Bergmann 5f7a01e222 jffs2: use unsigned 32-bit timstamps consistently
Most users of jffs2 are 32-bit systems that traditionally only support
timestamps using a 32-bit signed time_t, in the range from years 1902 to
2038. On 64-bit systems, jffs2 however interpreted the same timestamps
as unsigned values, reading back negative times (before 1970) as times
between 2038 and 2106.

Now that Linux supports 64-bit inode timestamps even on 32-bit systems,
let's use the second interpretation everywhere to allow jffs2 to be
used on 32-bit systems beyond 2038 without a fundamental change to the
inode format.

This has a slight risk of regressions, when existing files with timestamps
before 1970 are present in file system images and are now interpreted
as future time stamps. I considered moving the wraparound point a bit,
e.g. to 1960, in order to deal with timestamps that ended up on Dec 31,
1969 due to incorrect timezone handling. However, this would complicate
the implementation unnecessarily, so I went with the simplest possible
method of extending the timestamps.

Writing files with timestamps before 1970 or after 2106 now results
in those times being clamped in the file system.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-18 16:44:01 +02:00
Arnd Bergmann c4592b9c37 jffs2: use 64-bit intermediate timestamps
The VFS now uses timespec64 timestamps consistently, but jffs2 still
converts them to 32-bit numbers on the storage medium. As the helper
functions for the conversion (get_seconds() and timespec_to_timespec64())
are now deprecated, let's change them over to the more modern
replacements.

This keeps the traditional interpretation of those values, where
the on-disk 32-bit numbers are taken to be negative numbers, i.e.
dates before 1970, on 32-bit machines, but future numbers past 2038
on 64-bit machines.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-18 16:43:58 +02:00
Linus Torvalds 7a932516f5 vfs/y2038: inode timestamps conversion to timespec64
This is a late set of changes from Deepa Dinamani doing an automated
 treewide conversion of the inode and iattr structures from 'timespec'
 to 'timespec64', to push the conversion from the VFS layer into the
 individual file systems.
 
 There were no conflicts between this and the contents of linux-next
 until just before the merge window, when we saw multiple problems:
 
 - A minor conflict with my own y2038 fixes, which I could address
   by adding another patch on top here.
 - One semantic conflict with late changes to the NFS tree. I addressed
   this by merging Deepa's original branch on top of the changes that
   now got merged into mainline and making sure the merge commit includes
   the necessary changes as produced by coccinelle.
 - A trivial conflict against the removal of staging/lustre.
 - Multiple conflicts against the VFS changes in the overlayfs tree.
   These are still part of linux-next, but apparently this is no longer
   intended for 4.18 [1], so I am ignoring that part.
 
 As Deepa writes:
 
   The series aims to switch vfs timestamps to use struct timespec64.
   Currently vfs uses struct timespec, which is not y2038 safe.
 
   The series involves the following:
   1. Add vfs helper functions for supporting struct timepec64 timestamps.
   2. Cast prints of vfs timestamps to avoid warnings after the switch.
   3. Simplify code using vfs timestamps so that the actual
      replacement becomes easy.
   4. Convert vfs timestamps to use struct timespec64 using a script.
      This is a flag day patch.
 
   Next steps:
   1. Convert APIs that can handle timespec64, instead of converting
      timestamps at the boundaries.
   2. Update internal data structures to avoid timestamp conversions.
 
 Thomas Gleixner adds:
 
   I think there is no point to drag that out for the next merge window.
   The whole thing needs to be done in one go for the core changes which
   means that you're going to play that catchup game forever. Let's get
   over with it towards the end of the merge window.
 
 [1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbInZAAAoJEGCrR//JCVInReoQAIlVIIMt5ZX6wmaKbrjy9Itf
 MfgbFihQ/djLnuSPVQ3nztcxF0d66BKHZ9puVjz6+mIHqfDvJTRwZs9nU+sOF/T1
 g78fRkM1cxq6ZCkGYAbzyjyo5aC4PnSMP/NQLmwqvi0MXqqrbDoq5ZdP9DHJw39h
 L9lD8FM/P7T29Fgp9tq/pT5l9X8VU8+s5KQG1uhB5hii4VL6pD6JyLElDita7rg+
 Z7/V7jkxIGEUWF7vGaiR1QTFzEtpUA/exDf9cnsf51OGtK/LJfQ0oiZPPuq3oA/E
 LSbt8YQQObc+dvfnGxwgxEg1k5WP5ekj/Wdibv/+rQKgGyLOTz6Q4xK6r8F2ahxs
 nyZQBdXqHhJYyKr1H1reUH3mrSgQbE5U5R1i3My0xV2dSn+vtK5vgF21v2Ku3A1G
 wJratdtF/kVBzSEQUhsYTw14Un+xhBLRWzcq0cELonqxaKvRQK9r92KHLIWNE7/v
 c0TmhFbkZA+zR8HdsaL3iYf1+0W/eYy8PcvepyldKNeW2pVk3CyvdTfY2Z87G2XK
 tIkK+BUWbG3drEGG3hxZ3757Ln3a9qWyC5ruD3mBVkuug/wekbI8PykYJS7Mx4s/
 WNXl0dAL0Eeu1M8uEJejRAe1Q3eXoMWZbvCYZc+wAm92pATfHVcKwPOh8P7NHlfy
 A3HkjIBrKW5AgQDxfgvm
 =CZX2
 -----END PGP SIGNATURE-----

Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground

Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
 "This is a late set of changes from Deepa Dinamani doing an automated
  treewide conversion of the inode and iattr structures from 'timespec'
  to 'timespec64', to push the conversion from the VFS layer into the
  individual file systems.

  As Deepa writes:

   'The series aims to switch vfs timestamps to use struct timespec64.
    Currently vfs uses struct timespec, which is not y2038 safe.

    The series involves the following:
    1. Add vfs helper functions for supporting struct timepec64
       timestamps.
    2. Cast prints of vfs timestamps to avoid warnings after the switch.
    3. Simplify code using vfs timestamps so that the actual replacement
       becomes easy.
    4. Convert vfs timestamps to use struct timespec64 using a script.
       This is a flag day patch.

    Next steps:
    1. Convert APIs that can handle timespec64, instead of converting
       timestamps at the boundaries.
    2. Update internal data structures to avoid timestamp conversions'

  Thomas Gleixner adds:

   'I think there is no point to drag that out for the next merge
    window. The whole thing needs to be done in one go for the core
    changes which means that you're going to play that catchup game
    forever. Let's get over with it towards the end of the merge window'"

* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  pstore: Remove bogus format string definition
  vfs: change inode times to use struct timespec64
  pstore: Convert internal records to timespec64
  udf: Simplify calls to udf_disk_stamp_to_time
  fs: nfs: get rid of memcpys for inode times
  ceph: make inode time prints to be long long
  lustre: Use long long type to print inode time
  fs: add timespec64_truncate()
2018-06-15 07:31:07 +09:00
Arnd Bergmann 15eefe2a99 Merge branch 'vfs_timespec64' of https://github.com/deepa-hub/vfs into vfs-timespec64
Pull the timespec64 conversion from Deepa Dinamani:
 "The series aims to switch vfs timestamps to use
  struct timespec64. Currently vfs uses struct timespec,
  which is not y2038 safe.

  The flag patch applies cleanly. I've not seen the timestamps
  update logic change often. The series applies cleanly on 4.17-rc6
  and linux-next tip (top commit: next-20180517).

  I'm not sure how to merge this kind of a series with a flag patch.
  We are targeting 4.18 for this.
  Let me know if you have other suggestions.

  The series involves the following:
  1. Add vfs helper functions for supporting struct timepec64 timestamps.
  2. Cast prints of vfs timestamps to avoid warnings after the switch.
  3. Simplify code using vfs timestamps so that the actual
     replacement becomes easy.
  4. Convert vfs timestamps to use struct timespec64 using a script.
     This is a flag day patch.

  I've tried to keep the conversions with the script simple, to
  aid in the reviews. I've kept all the internal filesystem data
  structures and function signatures the same.

  Next steps:
  1. Convert APIs that can handle timespec64, instead of converting
     timestamps at the boundaries.
  2. Update internal data structures to avoid timestamp conversions."

I've pulled it into a branch based on top of the NFS changes that
are now in mainline, so I could resolve the non-obvious conflict
between the two while merging.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-14 14:54:00 +02:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Matthew Wilcox a3ac973076 Convert jffs2 acl to struct_size
Need to tell the compiler that the acl entries follow the acl header.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Deepa Dinamani 95582b0083 vfs: change inode times to use struct timespec64
struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
  current_time ( ... )
  {
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
  ...
- return timespec_trunc(
+ return timespec64_trunc(
  ... );
  }

@ depends on patch @
identifier xtime;
@@
 struct \( iattr \| inode \| kstat \) {
 ...
-       struct timespec xtime;
+       struct timespec64 xtime;
 ...
 }

@ depends on patch @
identifier t;
@@
 struct inode_operations {
 ...
int (*update_time) (...,
-       struct timespec t,
+       struct timespec64 t,
...);
 ...
 }

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
 fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
 ...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
  ) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 =  timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
 fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1  ;
|
 node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 stat->xtime = node2->i_xtime1;
|
 stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1  ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
 node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>
2018-06-05 16:57:31 -07:00
Al Viro 1e2e547a93 do d_instantiate/unlock_new_inode combinations safely
For anything NFS-exported we do _not_ want to unlock new inode
before it has grown an alias; original set of fixes got the
ordering right, but missed the nasty complication in case of
lockdep being enabled - unlock_new_inode() does
	lockdep_annotate_inode_mutex_key(inode)
which can only be done before anyone gets a chance to touch
->i_mutex.  Unfortunately, flipping the order and doing
unlock_new_inode() before d_instantiate() opens a window when
mkdir can race with open-by-fhandle on a guessed fhandle, leading
to multiple aliases for a directory inode and all the breakage
that follows from that.

	Correct solution: a new primitive (d_instantiate_new())
combining these two in the right order - lockdep annotate, then
d_instantiate(), then the rest of unlock_new_inode().  All
combinations of d_instantiate() with unlock_new_inode() should
be converted to that.

Cc: stable@kernel.org	# 2.6.29 and later
Tested-by: Mike Marshall <hubcap@omnibond.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-11 15:36:37 -04:00
Al Viro c66b23c284 jffs2_kill_sb(): deal with failed allocations
jffs2_fill_super() might fail to allocate jffs2_sb_info;
jffs2_kill_sb() must survive that.

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-15 23:49:05 -04:00
Boris Brezillon 8f347c4232 mtd: Unconditionally update ->fail_addr and ->addr in part_erase()
->fail_addr and ->addr can be updated no matter the result of
parent->_erase(), we just need to remove the code doing the same thing
in mtd_erase_callback() to avoid adjusting those fields twice.

Note that this can be done because all MTD users have been converted to
not pass an erase_info->callback() and are thus only taking the
->addr_fail and ->addr fields into account after part_erase() has
returned.

While we're at it, get rid of the erase_info->mtd field which was only
needed to let mtd_erase_callback() get the partition device back.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15 18:22:26 +01:00
Boris Brezillon 884cfd9023 mtd: Stop assuming mtd_erase() is asynchronous
None of the mtd->_erase() implementations work in an asynchronous manner,
so let's simplify MTD users that call mtd_erase(). All they need to do
is check the value returned by mtd_erase() and assume that != 0 means
failure.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15 18:21:07 +01:00
Linus Torvalds 255442c938 Documentation updates for 4.16. New stuff includes refcount_t
documentation, errseq documentation, kernel-doc support for nested
 structure definitions, the removal of lots of crufty kernel-doc support for
 unused formats, SPDX tag documentation, the beginnings of a manual for
 subsystem maintainers, and lots of fixes and updates.
 
 As usual, some of the changesets reach outside of Documentation/ to effect
 kerneldoc comment fixes.  It also adds the new LICENSES directory, of which
 Thomas promises I do not need to be the maintainer.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJab11TAAoJEI3ONVYwIuV6i1UP/1LgGPHW9Ygq5qaLFbReZd/u
 Mx/orrhHX0PdkbCCE+CbL8Vm1m4UKFDTBdlpk3s542zxeeG0ZBXuTnvq4Kyk+cTN
 p4/vsIEzk/Ih13/glGE5MlV+EjiEK+8hK69TIUj7bAyuHmpzofjRz9/1M6RLDGDC
 HY6UI58AXG0yOQWMWCGRMYpQAFUGij2equ7Doe1ugXRq14dx7V4RsOhI140iRk7t
 bquAq1rS2fXniiuPFmLBUe4dWW28isVa/Vl/aXcaWQDKMyT0OLhjOMW36wWKqtPi
 WdVCpHv1NLZNyZZr9S3kvfOwW+BUqpEzfVwssyBLW4h0tsnIx0U0HVhSTY8/TvFZ
 QD9yCSana4LB/e5CHXIX5lBHbjHxf+rETXqVV4MgwDaMvM3mCo4X6WUTJDmZADo6
 vQISEKeb4su5uWAbc9T9xwRSLhZnFVdJ/QuYdNQ5+EpFJYLhzQ9eBvEz6JstSIXL
 p9ASBiPNY3ulpVZ8q0JOHJRBhq5mHJH6Dy8achzbILy2l/ZI4b8lJ53mw9II04cp
 puF96E6HpvuZ8Tgjjrg9U3ZdxXNrUgc/tjk2ZDkyTglk1XF2jKSq2tiNSZ3oLrJm
 XqJPnpCeyJM5UDvwkIBzgC41WEHwe8uvoNbUnc4X7UJSZegFzcSLQXf5qaprHS5k
 XeQ7sbd+S+jzVVjFi0W5
 =Z15Z
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.16' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "Documentation updates for 4.16.

  New stuff includes refcount_t documentation, errseq documentation,
  kernel-doc support for nested structure definitions, the removal of
  lots of crufty kernel-doc support for unused formats, SPDX tag
  documentation, the beginnings of a manual for subsystem maintainers,
  and lots of fixes and updates.

  As usual, some of the changesets reach outside of Documentation/ to
  effect kerneldoc comment fixes. It also adds the new LICENSES
  directory, of which Thomas promises I do not need to be the
  maintainer"

* tag 'docs-4.16' of git://git.lwn.net/linux: (65 commits)
  linux-next: docs-rst: Fix typos in kfigure.py
  linux-next: DOC: HWPOISON: Fix path to debugfs in hwpoison.txt
  Documentation: Fix misconversion of #if
  docs: add index entry for networking/msg_zerocopy
  Documentation: security/credentials.rst: explain need to sort group_list
  LICENSES: Add MPL-1.1 license
  LICENSES: Add the GPL 1.0 license
  LICENSES: Add Linux syscall note exception
  LICENSES: Add the MIT license
  LICENSES: Add the BSD-3-clause "Clear" license
  LICENSES: Add the BSD 3-clause "New" or "Revised" License
  LICENSES: Add the BSD 2-clause "Simplified" license
  LICENSES: Add the LGPL-2.1 license
  LICENSES: Add the LGPL 2.0 license
  LICENSES: Add the GPL 2.0 license
  Documentation: Add license-rules.rst to describe how to properly identify file licenses
  scripts: kernel_doc: better handle show warnings logic
  fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at
  doc: md: Fix a file name to md-fault.c in fault-injection.txt
  errseq: Add to documentation tree
  ...
2018-01-31 19:25:25 -08:00
Linus Torvalds 19e7b5f994 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "All kinds of misc stuff, without any unifying topic, from various
  people.

  Neil's d_anon patch, several bugfixes, introduction of kvmalloc
  analogue of kmemdup_user(), extending bitfield.h to deal with
  fixed-endians, assorted cleanups all over the place..."

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
  alpha: osf_sys.c: use timespec64 where appropriate
  alpha: osf_sys.c: fix put_tv32 regression
  jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
  dcache: delete unused d_hash_mask
  dcache: subtract d_hash_shift from 32 in advance
  fs/buffer.c: fold init_buffer() into init_page_buffers()
  fs: fold __inode_permission() into inode_permission()
  fs: add RWF_APPEND
  sctp: use vmemdup_user() rather than badly open-coding memdup_user()
  snd_ctl_elem_init_enum_names(): switch to vmemdup_user()
  replace_user_tlv(): switch to vmemdup_user()
  new primitive: vmemdup_user()
  memdup_user(): switch to GFP_USER
  eventfd: fold eventfd_ctx_get() into eventfd_ctx_fileget()
  eventfd: fold eventfd_ctx_read() into eventfd_read()
  eventfd: convert to use anon_inode_getfd()
  nfs4file: get rid of pointless include of btrfs.h
  uvc_v4l2: clean copyin/copyout up
  vme_user: don't use __copy_..._user()
  usx2y: don't bother with memdup_user() for 16-byte structure
  ...
2018-01-31 09:25:20 -08:00
Jake Daryll Obina 5bdd0c6f89 jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode()
can get called twice in the error handling path, the first call in
jffs2_iget() itself and the second through iget_failed(). This can result
to a use-after-free error in the second jffs2_do_clear_inode() call, such
as shown by the oops below wherein the second jffs2_do_clear_inode() call
was trying to free node fragments that were already freed in the first
jffs2_do_clear_inode() call.

[   78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c
[   78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b
[   78.185871] pgd = ffffffc03a567000
[   78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000
[   78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
[   78.513147] PC is at rb_first_postorder+0xc/0x28
[   78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2]
[   78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105
[   78.526757] sp : ffffff800cea38f0
[   78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80
[   78.532754] x27: 0000000000000000 x26: ffffff800cea3c70
[   78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d
[   78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8
[   78.544760] x21: 0000000000000000 x20: 0000000000000000
[   78.548762] x19: ffffffc037d48910 x18: ffffff800891a588
[   78.552764] x17: 0000000000000800 x16: 0000000000000c00
[   78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f
[   78.560767] x13: 6461657220726f66 x12: 2064656c69616620
[   78.564769] x11: 435243203a6c616e x10: 7265746e695f6564
[   78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038
[   78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
[   78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000
[   78.580777] x3 : 0000000000000000 x2 : 000000403755e000
[   78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b
...
[   79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28
[   79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2]
[   79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2]
[   79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168
[   79.056835] [<ffffff8008202650>] iput+0x1c0/0x200
[   79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c
[   79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2]
[   79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2]
[   79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190
[   79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c
[   79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108
[   79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100
[   79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c
[   79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114
[   79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98
[   79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4
[   79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821)

The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since
iget_failed() will eventually call jffs2_do_clear_inode() if needed, so
just remove it.

Fixes: 5451f79f5f ("iget: stop JFFS2 from using iget() and read_inode()")
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jake Daryll Obina <jake.obina@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-25 19:34:30 -05:00
Adam Borowski 91581e4c60 fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.at
This link is replicated in most filesystems' config stanzas.  Referring
to an archived version of that site is pointless as it mostly deals with
patches; user documentation is available elsewhere.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-01-01 12:45:37 -07:00
Linus Torvalds 1751e8a6cb Rename superblock flags (MS_xyz -> SB_xyz)
This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Torvalds 0f0d12728e Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount flag updates from Al Viro:
 "Another chunk of fmount preparations from dhowells; only trivial
  conflicts for that part. It separates MS_... bits (very grotty
  mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
  only a small subset of MS_... stuff).

  This does *not* convert the filesystems to new constants; only the
  infrastructure is done here. The next step in that series is where the
  conflicts would be; that's the conversion of filesystems. It's purely
  mechanical and it's better done after the merge, so if you could run
  something like

	list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')

	sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
	        -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
	        -e 's/\<MS_NODEV\>/SB_NODEV/g' \
	        -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
	        -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
	        -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
	        -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
	        -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
	        -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
	        -e 's/\<MS_SILENT\>/SB_SILENT/g' \
	        -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
	        -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
	        -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
	        -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
	        $list

  and commit it with something along the lines of 'convert filesystems
  away from use of MS_... constants' as commit message, it would save a
  quite a bit of headache next cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Differentiate mount flags (MS_*) from internal superblock flags
  VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
  vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14 18:54:01 -07:00
Linus Torvalds a59e57da49 MTD changes for 4.14:
General updates:
  * Constify pci_device_id in various drivers
  * Constify device_type
  * Remove pad control code from the Gemini driver
  * Use %pOF to print OF node full_name
  * Various fixes in the physmap_of driver
  * Remove unused vars in mtdswap
  * Check devm_kzalloc() return value in the spear_smi driver
  * Check clk_prepare_enable() return code in the st_spi_fsm driver
  * Create per MTD device debugfs enties
 
 NAND updates, from Boris Brezillon:
  * Fix memory leaks in the core
  * Remove unused NAND locking support
  * Rename nand.h into rawnand.h (preparing support for spi NANDs)
  * Use NAND_MAX_ID_LEN where appropriate
  * Fix support for 20nm Hynix chips
  * Fix support for Samsung and Hynix SLC NANDs
  * Various cleanup, improvements and fixes in the qcom driver
  * Fixes for bugs detected by various static code analysis tools
  * Fix mxc ooblayout definition
  * Add a new part_parsers to tmio and sharpsl platform data in order to
    define a custom list of partition parsers
  * Request the reset line in exclusive mode in the sunxi driver
  * Fix a build error in the orion-nand driver when compiled for ARMv4
  * Allow 64-bit mvebu platforms to select the PXA3XX driver
 
 SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
  * add support to the JEDEC JESD216B specification (SFDP tables).
  * add support to the Intel Denverton SPI flash controller.
  * fix error recovery for Spansion/Cypress SPI NOR memories.
  * fix 4-byte address management for the Aspeed SPI controller.
  * add support to some Microchip SST26 memory parts
  * remove unneeded pinctrl header Write a message for tag:
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJZrav6Ixxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcABwkP/joDrq09RIC9n5gP+ubJe6O1jKvNWDd6bIVXD3Ke
 73R0a0ANwwWlNYWTChTdrb8UeewVS1bzutyy5O2Sbdb6Jc6s7xkfQDTsbET2HWOK
 S7Lt/zjlC6/6cow59B6h43PGS6wmIFaZD3K+70sGhvFnV8epVUzS2Aa783xS8LXm
 so2djZOdUYnW+yE0eho24VQR6nS4YP4Vc+7Mm9skjU0ifjB9mJiWRkzoQnqIgORO
 M+Iab+qjDs9KR/edWh6mZtnvjps0VSW4I40YsClpcgIn550w1DSXe4u6/8Nk+2Bp
 gfrALls91gob0ocxmEdIyLID+M0410HcN/Lvh36nw+tkkGTaXf0D6mkqzdKNrZ3w
 yz+UV9uf19kr1c6zFGcCvUlD0btn9KT+F2legnhgURtwUyDFQcaYQlkpDIeEzUMV
 ZrtzKbSE2v9810YKXjtCnseewdP+Eph/ewN6ODX5yg/fs8K0fyQYTRtYYM50U69X
 md8zznBBDPhJVu5T2Of7my9V1SxvCP8a7LrKjAXuFHpZ/CHiPe+QOWBgG2L+zXXT
 e10/rTg7T2pcyKpBvL/3/mCYeJ+Iup3lKT1EHGCXcKnLGecVgOsbvdG+JnvQMI2J
 FLmu1exvrzi0Gcrs/05hqwyUvkHZ5FB1a+heNOtmQ+h1U0ElXqILyu7brzghupRe
 3phO
 =UgCd
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "General updates:
   - Constify pci_device_id in various drivers
   - Constify device_type
   - Remove pad control code from the Gemini driver
   - Use %pOF to print OF node full_name
   - Various fixes in the physmap_of driver
   - Remove unused vars in mtdswap
   - Check devm_kzalloc() return value in the spear_smi driver
   - Check clk_prepare_enable() return code in the st_spi_fsm driver
   - Create per MTD device debugfs enties

  NAND updates, from Boris Brezillon:
   - Fix memory leaks in the core
   - Remove unused NAND locking support
   - Rename nand.h into rawnand.h (preparing support for spi NANDs)
   - Use NAND_MAX_ID_LEN where appropriate
   - Fix support for 20nm Hynix chips
   - Fix support for Samsung and Hynix SLC NANDs
   - Various cleanup, improvements and fixes in the qcom driver
   - Fixes for bugs detected by various static code analysis tools
   - Fix mxc ooblayout definition
   - Add a new part_parsers to tmio and sharpsl platform data in order
     to define a custom list of partition parsers
   - Request the reset line in exclusive mode in the sunxi driver
   - Fix a build error in the orion-nand driver when compiled for ARMv4
   - Allow 64-bit mvebu platforms to select the PXA3XX driver

  SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
   - add support to the JEDEC JESD216B specification (SFDP tables).
   - add support to the Intel Denverton SPI flash controller.
   - fix error recovery for Spansion/Cypress SPI NOR memories.
   - fix 4-byte address management for the Aspeed SPI controller.
   - add support to some Microchip SST26 memory parts
   - remove unneeded pinctrl header Write a message for tag:"

* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
  mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
  mtd: nand: make Samsung SLC NAND usable again
  mtd: nand: tmio: Register partitions using the parsers
  mfd: tmio: Add partition parsers platform data
  mtd: nand: sharpsl: Register partitions using the parsers
  mtd: nand: sharpsl: Add partition parsers platform data
  mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
  mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
  dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
  dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
  dt-bindings: qcom_nandc: fix the ipq806x device tree example
  mtd: nand: qcom: support for different DEV_CMD register offsets
  mtd: nand: qcom: QPIC data descriptors handling
  mtd: nand: qcom: enable BAM or ADM mode
  mtd: nand: qcom: erased codeword detection configuration
  mtd: nand: qcom: support for read location registers
  mtd: nand: qcom: support for passing flags in DMA helper functions
  mtd: nand: qcom: add BAM DMA descriptor handling
  mtd: nand: qcom: allocate BAM transaction
  mtd: nand: qcom: DMA mapping support for register read buffer
  ...
2017-09-09 14:48:21 -07:00
Boris Brezillon d4092d76a4 mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Peter Pan <peterpandong@micron.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-08-13 10:11:49 +02:00
Jeff Layton 3b49c9a1e9 fs: convert a pile of fsync routines to errseq_t based reporting
This patch converts most of the in-kernel filesystems that do writeback
out of the pagecache to report errors using the errseq_t-based
infrastructure that was recently added. This allows them to report
errors once for each open file description.

Most filesystems have a fairly straightforward fsync operation. They
call filemap_write_and_wait_range to write back all of the data and
wait on it, and then (sometimes) sync out the metadata.

For those filesystems this is a straightforward conversion from calling
filemap_write_and_wait_range in their fsync operation to calling
file_write_and_wait_range.

Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2017-08-01 08:39:29 -04:00
David Howells bc98a42c1f VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-17 08:45:34 +01:00
Colin Ian King 8918821f37 jffs2: fix spelling mistake: "requestied" -> "requested"
trivial fix to spelling mistake in JFFS2_ERROR message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
[Brian: also fix 'an' -> 'a']
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-04-19 11:35:55 -07:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Ingo Molnar 5b825c3af1 sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:31 +01:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Miklos Szeredi dfeef68862 vfs: remove ".readlink = generic_readlink" assignments
If .readlink == NULL implies generic_readlink().

Generated by:

to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-09 16:45:04 +01:00
Linus Torvalds 101105b171 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 ">rename2() work from Miklos + current_time() from Deepa"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Replace current_fs_time() with current_time()
  fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
  fs: Replace CURRENT_TIME with current_time() for inode timestamps
  fs: proc: Delete inode time initializations in proc_alloc_inode()
  vfs: Add current_time() api
  vfs: add note about i_op->rename changes to porting
  fs: rename "rename2" i_op to "rename"
  vfs: remove unused i_op->rename
  fs: make remaining filesystems use .rename2
  libfs: support RENAME_NOREPLACE in simple_rename()
  fs: support RENAME_NOREPLACE for local filesystems
  ncpfs: fix unused variable warning
2016-10-10 20:16:43 -07:00
Al Viro 3873691e5a Merge remote-tracking branch 'ovl/rename2' into for-linus 2016-10-10 23:02:51 -04:00
Linus Torvalds 97d2116708 Merge branch 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
 "xattr stuff from Andreas

  This completes the switch to xattr_handler ->get()/->set() from
  ->getxattr/->setxattr/->removexattr"

* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: Remove {get,set,remove}xattr inode operations
  xattr: Stop calling {get,set,remove}xattr inode operations
  vfs: Check for the IOP_XATTR flag in listxattr
  xattr: Add __vfs_{get,set,remove}xattr helpers
  libfs: Use IOP_XATTR flag for empty directory handling
  vfs: Use IOP_XATTR flag for bad-inode handling
  vfs: Add IOP_XATTR inode operations flag
  vfs: Move xattr_resolve_name to the front of fs/xattr.c
  ecryptfs: Switch to generic xattr handlers
  sockfs: Get rid of getxattr iop
  sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
  kernfs: Switch to generic xattr handlers
  hfs: Switch to generic xattr handlers
  jffs2: Remove jffs2_{get,set,remove}xattr macros
  xattr: Remove unnecessary NULL attribute name check
2016-10-10 17:11:50 -07:00
Andreas Gruenbacher fd50ecaddf vfs: Remove {get,set,remove}xattr inode operations
These inode operations are no longer used; remove them.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-07 21:48:36 -04:00
Andreas Gruenbacher 6966f842c0 jffs2: Remove jffs2_{get,set,remove}xattr macros
When CONFIG_JFFS2_FS_XATTR is off, jffs2_xattr_handlers is defined as
NULL. With sb->s_xattr == NULL, the generic_{get,set,remove}xattr
functions produce the same result as setting the {get,set,remove}xattr
inode operations to NULL, so there is no need for these macros.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-06 22:17:38 -04:00
Deepa Dinamani 02027d42c3 fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
CURRENT_TIME_SEC is not y2038 safe. current_time() will
be transitioned to use 64 bit time along with vfs in a
separate patch.
There is no plan to transistion CURRENT_TIME_SEC to use
y2038 safe time interfaces.

current_time() will also be extended to use superblock
range checking parameters when range checking is introduced.

This works because alloc_super() fills in the the s_time_gran
in super block to NSEC_PER_SEC.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:06:22 -04:00
Miklos Szeredi 2773bf00ae fs: rename "rename2" i_op to "rename"
Generated patch:

sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2`
sed -i "s/\brename2\b/rename/g" `git grep -wl rename2`

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27 11:03:58 +02:00
Miklos Szeredi f03b8ad8d3 fs: support RENAME_NOREPLACE for local filesystems
This is trivial to do:

 - add flags argument to foo_rename()
 - check if flags doesn't have any other than RENAME_NOREPLACE
 - assign foo_rename() to .rename2 instead of .rename

Filesystems converted:

affs, bfs, exofs, ext2, hfs, hfsplus, jffs2, jfs, logfs, minix, msdos,
nilfs2, omfs, reiserfs, sysvfs, ubifs, udf, ufs, vfat.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Boaz Harrosh <ooo@electrozaur.com>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Bob Copeland <me@bobcopeland.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
2016-09-27 11:03:57 +02:00
Jan Kara 31051c85b5 fs: Give dentry to inode_change_ok() instead of inode
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2016-09-22 10:56:19 +02:00
Jan Kara 073931017b posix_acl: Clear SGID bit when setting file permissions
When file permissions are modified via chmod(2) and the user is not in
the owning group or capable of CAP_FSETID, the setgid bit is cleared in
inode_change_ok().  Setting a POSIX ACL via setxattr(2) sets the file
permissions as well as the new ACL, but doesn't clear the setgid bit in
a similar way; this allows to bypass the check in chmod(2).  Fix that.

References: CVE-2016-7097
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2016-09-22 10:55:32 +02:00
Linus Torvalds 8387ff2577 vfs: make the string hashes salt the hash
We always mixed in the parent pointer into the dentry name hash, but we
did it late at lookup time.  It turns out that we can simplify that
lookup-time action by salting the hash with the parent pointer early
instead of late.

A few other users of our string hashes also wanted to mix in their own
pointers into the hash, and those are updated to use the same mechanism.

Hash users that don't have any particular initial salt can just use the
NULL pointer as a no-salt.

Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-10 20:21:46 -07:00
Al Viro 5930122683 switch xattr_handler->set() to passing dentry and inode separately
preparation for similar switch in ->setxattr() (see the next commit for
rationale).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-27 15:39:43 -04:00
Al Viro c51da20c48 more trivial ->iterate_shared conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-09 11:41:14 -04:00