Граф коммитов

31 Коммитов

Автор SHA1 Сообщение Дата
Benjamin Herrenschmidt 2bda347bc5 powerpc: Fix 32-bit SMP boot on CHRP
prom_init was changed to take a new argument, the address
where the kernel is loaded, which is now used to copy the
SMP spin loop down before use.

However, only head_64.S was adapted to pass this new value,
not head_32.S, thus breaking SMP boot on 32-bit SMP CHRP
machines.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-15 10:13:29 +11:00
Becky Bruce 4ee7084eb1 POWERPC: Allow 32-bit hashed pgtable code to support 36-bit physical
This rearranges a bit of code, and adds support for
36-bit physical addressing for configs that use a
hashed page table.  The 36b physical support is not
enabled by default on any config - it must be
explicitly enabled via the config system.

This patch *only* expands the page table code to accomodate
large physical addresses on 32-bit systems and enables the
PHYS_64BIT config option for 86xx.  It does *not*
allow you to boot a board with more than about 3.5GB of
RAM - for that, SWIOTLB support is also required (and
coming soon).

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-24 16:29:44 -05:00
Rocky Craig 9acd57ca74 powerpc: Fix TLB invalidation on boot on 32-bit
The intent of "flush_tlbs" is to invalidate all TLB entries by doing a
TLB invalidate instruction for all pages in the address range 0 to
0x00400000.  A loop counter is set up at the high value and
decremented by page size.  However, the loop is only done once as the
sense of the conditional branch at the loop end does not match the
setup/decrement.  This fixes it to do the whole range by correcting
the branch condition.

Signed-off-by: Rocky Craig <rocky.craig@hp.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-18 14:22:34 +10:00
Michael Neuling 6f3d8e6947 powerpc: Make load_up_fpu and load_up_altivec callable
Make load_up_fpu and load_up_altivec callable so they can be reused by
the VSX code.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01 11:28:45 +10:00
Benjamin Herrenschmidt ec2b36b9f2 [POWERPC] Move stackframe definitions to common header
This moves various definitions used all over the place to parse stack
frames to ptrace.h so only one definition is needed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-18 15:37:18 +10:00
Dale Farnsworth 445857e0fc [POWERPC] Remove dead code at KernelAltiVec
This code isn't referenced anywhere, so remove it.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-26 22:17:03 +11:00
Kumar Gala bee86f14d5 [POWERPC] Fix swapper_pg_dir size when CONFIG_PTE_64BIT=y on FSL_BOOKE
The size of swapper_pg_dir is 8k instead of 4k when using 64-bit PTEs
(CONFIG_PTE_64BIT).

This was reported by Cedric Hombourger <chombourger@gmail.com>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-06 13:11:04 -06:00
Kumar Gala 8a13c4f972 [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
Move to using PAGE_OFFSET instead of TASK_SIZE or KERNELBASE value on
6xx/40x/44x/fsl-booke to determine if the faulting address is a kernel or
user space address.  This mimics how the macro is_kernel_addr() works.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-11 13:36:52 -05:00
Scott Wood c374e00e17 [POWERPC] Add early debug console for CPM serial ports.
This code assumes that the ports have been previously set up, with
buffers in DPRAM.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:35:43 -05:00
Stephen Rothwell 19a8d97d89 [POWERPC] Remove cmd_line from head*.S
It is just a C char array, so declare it thusly.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Kumar Gala 748a768384 [POWERPC] Fix modpost warnings from head*.S on ppc32
We get warnings like the following from the various ppc32 head*.S files:

WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')

Added a .text.head section simliar to what other architectures do since
modpost already excludes this from its warnings.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:36 -05:00
Scott Wood bde6c6e16a [POWERPC] Check _PAGE_RW and _PAGE_PRESENT on kernel addresses
Previously, the TLB miss handlers assumed that pages above KERNELBASE are
always present and read/write.  This assumption is false in the case of
CONFIG_DEBUG_PAGEALLOC.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:23 +10:00
David Gibson f21f49ea63 [POWERPC] Remove the dregs of APUS support from arch/powerpc
APUS (the Amiga Power-Up System) is not supported under arch/powerpc
and it's unlikely it ever will be.  Therefore, this patch removes the
fragments of APUS support code from arch/powerpc which have been
copied from arch/ppc.

A few APUS references are left in asm-powerpc in .h files which are
still used from arch/ppc.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 22:30:15 +10:00
Adrian Bunk c53653130f [POWERPC] Remove the broken Gemini support
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:58 +11:00
Kim Phillips aa42c69c67 [POWERPC] Add support for FP emulation for the e300c2 core
The e300c2 has no FPU.  Its MSR[FP] is grounded to zero.  If an attempt
is made to execute a floating point instruction (including floating-point
load, store, or move instructions), the e300c2 takes a floating-point
unavailable interrupt.

This patch adds support for FP emulation on the e300c2 by declaring a
new CPU_FTR_FP_TAKES_FPUNAVAIL, where FP unavail interrupts are
intercepted and redirected to the ProgramCheck exception path for
correct emulation handling.

(If we run out of CPU_FTR bits we could look to reclaim this bit by adding
support to test the cpu_user_features for PPC_FEATURE_HAS_FPU instead)

It adds a nop to the exception path for 32-bit processors with a FPU.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-08 02:43:30 -06:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Jon Loeliger ee0339f205 [POWERPC] Add starting of secondary 86xx CPUs.
Clear the high BATS during load_up_mmu if FTR_HAS_HIGH_BATS.
Allow just a bit more time for secondary CPUs to phone home.

Signed-off-by: Wei Zhang <Wei.Zhang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:28 +10:00
Alan Curry f1434a4854 [PATCH] powerpc: fix altivec_unavailable_exception Oopses
altivec_unavailable_exception is called without setting r3... it looks like
the r3 that actually gets passed in as struct pt_regs *regs is the
undisturbed value of r3 at the time the altivec instruction was encountered.
The user actually gets to choose the pt_regs printed in the Oops!

This fixes the oops by passing the correct pt_regs pointer to
altivec_unavailable_exception.

Signed-off-by: Alan Curry <pacman@TheWorld.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:23 +11:00
Paul Mackerras 0a498d96a3 powerpc: set CONFIG_PPC_OF=y always for ARCH=powerpc
The CONFIG_PPC_OF symbol is used to mean that the firmware device tree
access functions are available.  Since we always have a device tree
with ARCH=powerpc, make CONFIG_PPC_OF always Y for ARCH=powerpc.

This fixes some compile errors reported by Kumar Gala, but in a
different way to his patch.  This also makes prom_parse.o be compiled
only if CONFIG_PPC_OF so that non-OF ARCH=ppc platforms will compile.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 20:17:01 +11:00
Andy Fleming 555d97ac87 [PATCH] powerpc: G4+ oprofile support
This patch adds oprofile support for the 7450 and all its multitudinous
derivatives.

* Added 7450 (and derivatives) support for oprofile
* Changed e500 cputable to have oprofile model and cpu_type fields
* Added support for classic 32-bit performance monitor interrupt
* Cleaned up common powerpc oprofile code to be as common as possible
* Cleaned up oprofile_impl.h to reflect 32 bit classic code
* Added 32-bit MMCRx bitfield definitions and SPR numbers

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:06:03 +11:00
Benjamin Herrenschmidt d7f3945420 [PATCH] powerpc: Add back support for booting from BootX (#2)
ARCH=powerpc couldn't boot from BootX as it uses a "different" way of
getting in the kernel. This patch adds the necessary trampolines,
creating a flattened device-tree from the tree passed from MacOS, and
initializing the btext engine early for really-early debugging.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:58 +11:00
Benjamin Herrenschmidt 51d3082fe6 [PATCH] powerpc: Unify udbg (#2)
This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:54 +11:00
Paul Mackerras 22c841c9a4 powerpc: Initialize secondary CPU setup for 32-bit SMP
32-bit SMP powermacs weren't booting with ARCH=powerpc because the
boot cpu wasn't saving away the state of various control registers,
but the secondary CPUs were loading them from the uninitialized
state.  This adds the necessary save-state call.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 22:34:43 +11:00
Paul Mackerras f78541dcec powerpc: Merge xmon
The merged version follows the ppc64 version pretty closely mostly,
and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version.
The main difference for ppc64 is that the 'p' command to call
show_state (which was always pretty dodgy) has been replaced by
the ppc32 'p' command, which calls a given procedure (so in fact
the old 'p' command behaviour can be achieved with 'p $show_state').

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:53:37 +10:00
Paul Mackerras d73e0c99f5 powerpc: Rename asm offset TRAP to _TRAP for 32-bit
... for consistency with 64-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:45:25 +10:00
Paul Mackerras bbd0abda9c powerpc: Merge 32-bit CHRP support.
SMP still needs more work but UP gets as far as starting userspace
at least.  This uses the 64-bit-style code for spinning up the cpus.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 21:45:56 +10:00
Paul Mackerras 77f543cb46 powerpc: Fix various compile errors with ARCH=ppc, ppc64 and powerpc
This makes ppc use the syscalls.c from arch/powerpc/kernel, exports
copy_and_flush from head_32.S for use by prom_init.c (ARCH=powerpc),
and consolidates the sys_fadvise64_64 implementations for 32-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18 14:19:41 +10:00
Paul Mackerras 30cd4a4e9c powerpc: Initialize btext subsystem later, after prom_init
We were initializing the btext stuff from prom_init(), thus breaking
the rule that all communication between prom_init() and the rest of
the kernel has to be via the flattened device tree.  This removes
the btext initialization calls from prom_init() and initializes it
instead after the device tree is unflattened.  It would be nice to
do it earlier, but that needs some more infrastructure to find the
properties we need in the flattened device tree.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 19:20:46 +10:00
Stephen Rothwell 7dffb72028 ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTES
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17 11:50:32 +10:00
Paul Mackerras b3b8dc6c07 powerpc: Use reg.h instead of processor.h when we just want reg names
Now that the register names and bit definitions are all in reg.h,
use that instead of processor.h in assembly code in a few places.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:20:10 +10:00
Paul Mackerras 70d64ceaa1 powerpc: Rename files to have consistent _32/_64 suffixes
This doesn't change any code, just renames things so we consistently
have foo_32.c and foo_64.c where we have separate 32- and 64-bit
versions.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 21:52:43 +10:00