Since event_trigger_data contains the .ops trigger_ops field, there's
no reason to pass the trigger_ops separately. Remove it as a param
from functions whenever event_trigger_data is passed.
Link: https://lkml.kernel.org/r/9856c9bc81bde57077f5b8d6f8faa47156c6354a.1644010575.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Code for registering triggers assumes it's possible to register more
than one trigger at a time. In fact, it's unimplemented and there
doesn't seem to be a reason to do that.
Remove the n_registered param from event_trigger_register() and fix up
callers.
Doing so simplifies the logic in event_trigger_register to the point
that it just becomes a wrapper calling event_command.reg().
It also removes the problematic call to event_command.unreg() in case
of failure. A new function, event_trigger_unregister() is also added
for callers to call themselves.
The changes to trace_events_hist.c simply allow compilation; a
separate patch follows which updates the hist triggers to work
correctly with the new changes.
Link: https://lkml.kernel.org/r/6149fec7a139d93e84fa4535672fb5bef88006b0.1644010575.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- New user_events interface. User space can register an event with the kernel
describing the format of the event. Then it will receive a byte in a page
mapping that it can check against. A privileged task can then enable that
event like any other event, which will change the mapped byte to true,
telling the user space application to start writing the event to the
tracing buffer.
- Add new "ftrace_boot_snapshot" kernel command line parameter. When set,
the tracing buffer will be saved in the snapshot buffer at boot up when
the kernel hands things over to user space. This will keep the traces that
happened at boot up available even if user space boot up has tracing as
well.
- Have TRACE_EVENT_ENUM() also update trace event field type descriptions.
Thus if a static array defines its size with an enum, the user space trace
event parsers can still know how to parse that array.
- Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
TRACE_EVENT() macro, but will attach to an existing tracepoint. This will
make one tracepoint be able to trace different content and not be stuck at
only what the original TRACE_EVENT() macro exports.
- Fixes to tracing error logging.
- Better saving of cmdlines to PIDs when tracing (use the wakeup events for
mapping).
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjiO3RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhQzAQDtek5p80p/zkMGymm14wSH6qq0NdgN
Kv7fTBwEewUa0gD/UCOVLw4Oj+JtHQhCa3sCGZopmRv0BT1+4UQANqosKQY=
=Au08
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- New user_events interface. User space can register an event with the
kernel describing the format of the event. Then it will receive a
byte in a page mapping that it can check against. A privileged task
can then enable that event like any other event, which will change
the mapped byte to true, telling the user space application to start
writing the event to the tracing buffer.
- Add new "ftrace_boot_snapshot" kernel command line parameter. When
set, the tracing buffer will be saved in the snapshot buffer at boot
up when the kernel hands things over to user space. This will keep
the traces that happened at boot up available even if user space boot
up has tracing as well.
- Have TRACE_EVENT_ENUM() also update trace event field type
descriptions. Thus if a static array defines its size with an enum,
the user space trace event parsers can still know how to parse that
array.
- Add new TRACE_CUSTOM_EVENT() macro. This acts the same as the
TRACE_EVENT() macro, but will attach to an existing tracepoint. This
will make one tracepoint be able to trace different content and not
be stuck at only what the original TRACE_EVENT() macro exports.
- Fixes to tracing error logging.
- Better saving of cmdlines to PIDs when tracing (use the wakeup events
for mapping).
* tag 'trace-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits)
tracing: Have type enum modifications copy the strings
user_events: Add trace event call as root for low permission cases
tracing/user_events: Use alloc_pages instead of kzalloc() for register pages
tracing: Add snapshot at end of kernel boot up
tracing: Have TRACE_DEFINE_ENUM affect trace event types as well
tracing: Fix strncpy warning in trace_events_synth.c
user_events: Prevent dyn_event delete racing with ioctl add/delete
tracing: Add TRACE_CUSTOM_EVENT() macro
tracing: Move the defines to create TRACE_EVENTS into their own files
tracing: Add sample code for custom trace events
tracing: Allow custom events to be added to the tracefs directory
tracing: Fix last_cmd_set() string management in histogram code
user_events: Fix potential uninitialized pointer while parsing field
tracing: Fix allocation of last_cmd in last_cmd_set()
user_events: Add documentation file
user_events: Add sample code for typical usage
user_events: Add self-test for validator boundaries
user_events: Add self-test for perf_event integration
user_events: Add self-test for dynamic_events integration
user_events: Add self-test for ftrace integration
...
Currently, the event probes save the type of the event they are attached
to when recording the event. For example:
# echo 'e:switch sched/sched_switch prev_state=$prev_state prev_prio=$prev_prio next_pid=$next_pid next_prio=$next_prio' > dynamic_events
# cat events/eprobes/switch/format
name: switch
ID: 1717
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:unsigned int __probe_type; offset:8; size:4; signed:0;
field:u64 prev_state; offset:12; size:8; signed:0;
field:u64 prev_prio; offset:20; size:8; signed:0;
field:u64 next_pid; offset:28; size:8; signed:0;
field:u64 next_prio; offset:36; size:8; signed:0;
print fmt: "(%u) prev_state=0x%Lx prev_prio=0x%Lx next_pid=0x%Lx next_prio=0x%Lx", REC->__probe_type, REC->prev_state, REC->prev_prio, REC->next_pid, REC->next_prio
The __probe_type adds 4 bytes to every event.
One of the reasons for creating eprobes is to limit what is traced in an
event to be able to limit what is written into the ring buffer. Having
this redundant 4 bytes to every event takes away from this.
The event that is recorded can be retrieved from the event probe itself,
that is available when the trace is happening. For user space tools, it
could simply read the dynamic_event file to find the event they are for.
So there is really no reason to write this information into the ring
buffer for every event.
Link: https://lkml.kernel.org/r/20220218190057.2f5a19a8@gandalf.local.home
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, tracing_log_err.cmd strings are restricted to a length of
MAX_FILTER_STR_VAL (256), which is too short for some commands already
seen in the wild (with cmd strings longer than that showing up
truncated).
Remove the restriction so that no command string is ever truncated.
Link: https://lkml.kernel.org/r/ca965f23256b350ebd94b3dc1a319f28e8267f5f.1643319703.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The event_command.parse() callback is responsible for parsing and
registering triggers. The existing command implementions for this
callback duplicate a lot of the same code, so to clean up and
consolidate those implementations, introduce a handful of helper
functions for implementors to use.
This also makes it easier for new commands to be implemented and
allows them to focus more on the customizations they provide rather
than obscuring and complicating it with boilerplate code.
Link: https://lkml.kernel.org/r/c1ff71f594d45177706571132bd3119491097221.1641823001.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The name of the func() callback on event_trigger_ops is too generic
and is easily confused with other callbacks with that name, so change
it to something that reflects its actual purpose.
In this case, the main purpose of the callback is to implement an
event trigger, so call it trigger() instead.
Also add some more documentation to event_trigger_ops describing the
callbacks a bit better.
Link: https://lkml.kernel.org/r/36ab812e3ee74ee03ae0043fda41a858ee728c00.1641823001.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The name of the func() callback on event_command is too generic and is
easily confused with other callbacks with that name, so change it to
something that reflects its actual purpose.
In this case, the main purpose of the callback is to parse an event
command, so call it parse() instead.
Link: https://lkml.kernel.org/r/7784e321840752ed88aac0b349c0c685fc9247b1.1641823001.git.zanussi@kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Make use of memset_startat helper to simplify the code, there should be
no functional change as a result of this patch.
Link: https://lkml.kernel.org/r/20211210012245.207489-1-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In case trace_event_buffer_lock_reserve() is called with preemption
enabled, the algorithm that defines the usage of the per cpu filter buffer
may fail if the task schedules to another CPU after determining which
buffer it will use.
Disable preemption when using the filter buffer. And because that same
buffer must be used throughout the call, keep preemption disabled until
the filter buffer is released.
This will also keep the semantics between the use case of when the filter
buffer is used, and when the ring buffer itself is used, as that case also
disables preemption until the ring buffer is released.
Link: https://lkml.kernel.org/r/20211130024318.880190623@goodmis.org
[ Fixed warning of assignment in if statement
Reported-by: kernel test robot <lkp@intel.com> ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add '__rel_loc' using trace event macros. These macros are usually
not used in the kernel, except for testing purpose.
This also add "rel_" variant of macros for dynamic_array string,
and bitmask.
Link: https://lkml.kernel.org/r/163757342119.510314.816029622439099016.stgit@devnote2
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add '__rel_loc' new dynamic data location attribute which encodes
the data location from the next to the field itself.
The '__data_loc' is used for encoding the dynamic data location on
the trace event record. But '__data_loc' is not useful if the writer
doesn't know the event header (e.g. user event), because it records
the dynamic data offset from the entry of the record, not the field
itself.
This new '__rel_loc' attribute encodes the data location relatively
from the next of the field. For example, when there is a record like
below (the number in the parentheses is the size of fields)
|header(N)|common(M)|fields(K)|__data_loc(4)|fields(L)|data(G)|
In this case, '__data_loc' field will be
__data_loc = (G << 16) | (N+M+K+4+L)
If '__rel_loc' is used, this will be
|header(N)|common(M)|fields(K)|__rel_loc(4)|fields(L)|data(G)|
where
__rel_loc = (G << 16) | (L)
This case shows L bytes after the '__rel_loc' attribute field,
if there is no fields after the __rel_loc field, L must be 0.
This is relatively easy (and no need to consider the kernel header
change) when the event data fields are composed by user who doesn't
know header and common fields.
Link: https://lkml.kernel.org/r/163757341258.510314.4214431827833229956.stgit@devnote2
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If a event is filtered by pid and a trigger that requires processing of
the event to happen is a attached to the event, the discard portion does
not take the pid filtering into account, and the event will then be
recorded when it should not have been.
Cc: stable@vger.kernel.org
Fixes: 3fdaf80f4a ("tracing: Implement event pid filtering")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Replace the obsolete and ambiguos macro in_irq() with new
macro in_hardirq().
Link: https://lkml.kernel.org/r/20210930000342.6016-1-changbin.du@gmail.com
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When building the files in the tracefs file system, do not by default set
any permissions for OTH (other). This will make it easier for admins who
want to define a group for accessing tracefs and not having to first
disable all the permission bits for "other" in the file system.
As tracing can leak sensitive information, it should never by default
allowing all users access. An admin can still set the permission bits for
others to have access, which may be useful for creating a honeypot and
seeing who takes advantage of it and roots the machine.
Link: https://lkml.kernel.org/r/20210818153038.864149276@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.
Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.
The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A new dynamic event is introduced: event probe. The event is attached
to an existing tracepoint and uses its fields as arguments. The user
can specify custom format string of the new event, select what tracepoint
arguments will be printed and how to print them.
An event probe is created by writing configuration string in
'dynamic_events' ftrace file:
e[:[SNAME/]ENAME] SYSTEM/EVENT [FETCHARGS] - Set an event probe
-:SNAME/ENAME - Delete an event probe
Where:
SNAME - System name, if omitted 'eprobes' is used.
ENAME - Name of the new event in SNAME, if omitted the SYSTEM_EVENT is used.
SYSTEM - Name of the system, where the tracepoint is defined, mandatory.
EVENT - Name of the tracepoint event in SYSTEM, mandatory.
FETCHARGS - Arguments:
<name>=$<field>[:TYPE] - Fetch given filed of the tracepoint and print
it as given TYPE with given name. Supported
types are:
(u8/u16/u32/u64/s8/s16/s32/s64), basic type
(x8/x16/x32/x64), hexadecimal types
"string", "ustring" and bitfield.
Example, attach an event probe on openat system call and print name of the
file that will be opened:
echo "e:esys/eopen syscalls/sys_enter_openat file=\$filename:string" >> dynamic_events
A new dynamic event is created in events/esys/eopen/ directory. It
can be deleted with:
echo "-:esys/eopen" >> dynamic_events
Filters, triggers and histograms can be attached to the new event, it can
be matched in synthetic events. There is one limitation - an event probe
can not be attached to kprobe, uprobe or another event probe.
Link: https://lkml.kernel.org/r/20210812145805.2292326-1-tz.stoyanov@gmail.com
Link: https://lkml.kernel.org/r/20210819152825.142428383@goodmis.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The event filters are not applied on all of the output, which results in
the flood of printk when using tp_printk. Unfolding
event_trigger_unlock_commit_regs() into trace_event_buffer_commit(), so
the filters can be applied on every output.
Link: https://lkml.kernel.org/r/20210814034538.8428-1-kernelfans@gmail.com
Cc: stable@vger.kernel.org
Fixes: 0daa230296 ("tracing: Add tp_printk cmdline to have tracepoints go to printk()")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts, softirqs
and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail what
sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event.
This has been hardcoded as "1" since 2015, no tooling should be looking
at it now. If one exists, we can revert this commit, fix that tool and
try to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes trace
events to write to console. When user space starts, this can easily live
lock the system. Having a boot option to stop just after boot up is
useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that match
the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path from
user space that can do this. All other paths are considered a bug.
- Small clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYN8YPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhxLAP9Mo5hHv7Hg6W7Ddv77rThm+qclsMR/
yW0P+eJpMm4+xAD8Cq03oE1DimPK+9WZBKU5rSqAkqG6CjgDRw6NlIszzQQ=
=WEPR
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
Certain uses of "do once" functionality reside outside of fast path,
and so do not require jump label patching via static keys, making
existing DO_ONCE undesirable in such cases.
Replace uses of __section(".data.once") with DO_ONCE_LITE(_IF)?
This patch changes the return values of xfs_printk_once, printk_once,
and printk_deferred_once. Before, they returned whether the print was
performed, but now, they always return true. This is okay because the
return values of the following macros are entirely ignored throughout
the kernel:
- xfs_printk_once
- xfs_warn_once
- xfs_notice_once
- xfs_info_once
- printk_once
- pr_emerg_once
- pr_alert_once
- pr_crit_once
- pr_err_once
- pr_warn_once
- pr_notice_once
- pr_info_once
- pr_devel_once
- pr_debug_once
- printk_deferred_once
- orc_warn
Changes
v3:
- Expand commit message to explain why changing return values of
xfs_printk_once, printk_once, printk_deferred_once is benign
v2:
- Fix i386 build warnings
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timerlat tracer aims to help the preemptive kernel developers to
found souces of wakeup latencies of real-time threads. Like cyclictest,
the tracer sets a periodic timer that wakes up a thread. The thread then
computes a *wakeup latency* value as the difference between the *current
time* and the *absolute time* that the timer was set to expire. The main
goal of timerlat is tracing in such a way to help kernel developers.
Usage
Write the ASCII text "timerlat" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example:
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
It is possible to follow the trace by reading the trace trace file:
[root@f32 tracing]# cat trace
# tracer: timerlat
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# || /
# |||| ACTIVATION
# TASK-PID CPU# |||| TIMESTAMP ID CONTEXT LATENCY
# | | | |||| | | | |
<idle>-0 [000] d.h1 54.029328: #1 context irq timer_latency 932 ns
<...>-867 [000] .... 54.029339: #1 context thread timer_latency 11700 ns
<idle>-0 [001] dNh1 54.029346: #1 context irq timer_latency 2833 ns
<...>-868 [001] .... 54.029353: #1 context thread timer_latency 9820 ns
<idle>-0 [000] d.h1 54.030328: #2 context irq timer_latency 769 ns
<...>-867 [000] .... 54.030330: #2 context thread timer_latency 3070 ns
<idle>-0 [001] d.h1 54.030344: #2 context irq timer_latency 935 ns
<...>-868 [001] .... 54.030347: #2 context thread timer_latency 4351 ns
The tracer creates a per-cpu kernel thread with real-time priority that
prints two lines at every activation. The first is the *timer latency*
observed at the *hardirq* context before the activation of the thread.
The second is the *timer latency* observed by the thread, which is the
same level that cyclictest reports. The ACTIVATION ID field
serves to relate the *irq* execution to its respective *thread* execution.
The irq/thread splitting is important to clarify at which context
the unexpected high value is coming from. The *irq* context can be
delayed by hardware related actions, such as SMIs, NMIs, IRQs
or by a thread masking interrupts. Once the timer happens, the delay
can also be influenced by blocking caused by threads. For example, by
postponing the scheduler execution via preempt_disable(), by the
scheduler execution, or by masking interrupts. Threads can
also be delayed by the interference from other threads and IRQs.
The timerlat can also take advantage of the osnoise: traceevents.
For example:
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
[root@f32 tracing]# echo osnoise > set_event
[root@f32 tracing]# echo 25 > osnoise/stop_tracing_total_us
[root@f32 tracing]# tail -10 trace
cc1-87882 [005] d..h... 548.771078: #402268 context irq timer_latency 1585 ns
cc1-87882 [005] dNLh1.. 548.771082: irq_noise: local_timer:236 start 548.771077442 duration 4597 ns
cc1-87882 [005] dNLh2.. 548.771083: irq_noise: reschedule:253 start 548.771083017 duration 56 ns
cc1-87882 [005] dNLh2.. 548.771086: irq_noise: call_function_single:251 start 548.771083811 duration 2048 ns
cc1-87882 [005] dNLh2.. 548.771088: irq_noise: call_function_single:251 start 548.771086814 duration 1495 ns
cc1-87882 [005] dNLh2.. 548.771091: irq_noise: call_function_single:251 start 548.771089194 duration 1558 ns
cc1-87882 [005] dNLh2.. 548.771094: irq_noise: call_function_single:251 start 548.771091719 duration 1932 ns
cc1-87882 [005] dNLh2.. 548.771096: irq_noise: call_function_single:251 start 548.771094696 duration 1050 ns
cc1-87882 [005] d...3.. 548.771101: thread_noise: cc1:87882 start 548.771078243 duration 10909 ns
timerlat/5-1035 [005] ....... 548.771103: #402268 context thread timer_latency 25960 ns
For further information see: Documentation/trace/timerlat-tracer.rst
Link: https://lkml.kernel.org/r/71f18efc013e1194bcaea1e54db957de2b19ba62.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In the context of high-performance computing (HPC), the Operating System
Noise (*osnoise*) refers to the interference experienced by an application
due to activities inside the operating system. In the context of Linux,
NMIs, IRQs, SoftIRQs, and any other system thread can cause noise to the
system. Moreover, hardware-related jobs can also cause noise, for example,
via SMIs.
The osnoise tracer leverages the hwlat_detector by running a similar
loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
the sources of *osnoise* during its execution. Using the same approach
of hwlat, osnoise takes note of the entry and exit point of any
source of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source of
interference. The interference counter for NMI, IRQs, SoftIRQs, and
threads is increased anytime the tool observes these interferences' entry
events. When a noise happens without any interference from the operating
system level, the hardware noise counter increases, pointing to a
hardware-related noise. In this way, osnoise can account for any
source of interference. At the end of the period, the osnoise tracer
prints the sum of all noise, the max single noise, the percentage of CPU
available for the thread, and the counters for the noise sources.
Usage
Write the ASCII text "osnoise" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo osnoise > current_tracer
It is possible to follow the trace by reading the trace trace file::
[root@f32 tracing]# cat trace
# tracer: osnoise
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth MAX
# || / SINGLE Interference counters:
# |||| RUNTIME NOISE % OF CPU NOISE +-----------------------------+
# TASK-PID CPU# |||| TIMESTAMP IN US IN US AVAILABLE IN US HW NMI IRQ SIRQ THREAD
# | | | |||| | | | | | | | | | |
<...>-859 [000] .... 81.637220: 1000000 190 99.98100 9 18 0 1007 18 1
<...>-860 [001] .... 81.638154: 1000000 656 99.93440 74 23 0 1006 16 3
<...>-861 [002] .... 81.638193: 1000000 5675 99.43250 202 6 0 1013 25 21
<...>-862 [003] .... 81.638242: 1000000 125 99.98750 45 1 0 1011 23 0
<...>-863 [004] .... 81.638260: 1000000 1721 99.82790 168 7 0 1002 49 41
<...>-864 [005] .... 81.638286: 1000000 263 99.97370 57 6 0 1006 26 2
<...>-865 [006] .... 81.638302: 1000000 109 99.98910 21 3 0 1006 18 1
<...>-866 [007] .... 81.638326: 1000000 7816 99.21840 107 8 0 1016 39 19
In addition to the regular trace fields (from TASK-PID to TIMESTAMP), the
tracer prints a message at the end of each period for each CPU that is
running an osnoise/CPU thread. The osnoise specific fields report:
- The RUNTIME IN USE reports the amount of time in microseconds that
the osnoise thread kept looping reading the time.
- The NOISE IN US reports the sum of noise in microseconds observed
by the osnoise tracer during the associated runtime.
- The % OF CPU AVAILABLE reports the percentage of CPU available for
the osnoise thread during the runtime window.
- The MAX SINGLE NOISE IN US reports the maximum single noise observed
during the runtime window.
- The Interference counters display how many each of the respective
interference happened during the runtime window.
Note that the example above shows a high number of HW noise samples.
The reason being is that this sample was taken on a virtual machine,
and the host interference is detected as a hardware interference.
Tracer options
The tracer has a set of options inside the osnoise directory, they are:
- osnoise/cpus: CPUs at which a osnoise thread will execute.
- osnoise/period_us: the period of the osnoise thread.
- osnoise/runtime_us: how long an osnoise thread will look for noise.
- osnoise/stop_tracing_us: stop the system tracing if a single noise
higher than the configured value happens. Writing 0 disables this
option.
- osnoise/stop_tracing_total_us: stop the system tracing if total noise
higher than the configured value happens. Writing 0 disables this
option.
- tracing_threshold: the minimum delta between two time() reads to be
considered as noise, in us. When set to 0, the default value will
be used, which is currently 5 us.
Additional Tracing
In addition to the tracer, a set of tracepoints were added to
facilitate the identification of the osnoise source.
- osnoise:sample_threshold: printed anytime a noise is higher than
the configurable tolerance_ns.
- osnoise:nmi_noise: noise from NMI, including the duration.
- osnoise:irq_noise: noise from an IRQ, including the duration.
- osnoise:softirq_noise: noise from a SoftIRQ, including the
duration.
- osnoise:thread_noise: noise from a thread, including the duration.
Note that all the values are *net values*. For example, if while osnoise
is running, another thread preempts the osnoise thread, it will start a
thread_noise duration at the start. Then, an IRQ takes place, preempting
the thread_noise, starting a irq_noise. When the IRQ ends its execution,
it will compute its duration, and this duration will be subtracted from
the thread_noise, in such a way as to avoid the double accounting of the
IRQ execution. This logic is valid for all sources of noise.
Here is one example of the usage of these tracepoints::
osnoise/8-961 [008] d.h. 5789.857532: irq_noise: local_timer:236 start 5789.857529929 duration 1845 ns
osnoise/8-961 [008] dNh. 5789.858408: irq_noise: local_timer:236 start 5789.858404871 duration 2848 ns
migration/8-54 [008] d... 5789.858413: thread_noise: migration/8:54 start 5789.858409300 duration 3068 ns
osnoise/8-961 [008] .... 5789.858413: sample_threshold: start 5789.858404555 duration 8723 ns interferences 2
In this example, a noise sample of 8 microseconds was reported in the last
line, pointing to two interferences. Looking backward in the trace, the
two previous entries were about the migration thread running after a
timer IRQ execution. The first event is not part of the noise because
it took place one millisecond before.
It is worth noticing that the sum of the duration reported in the
tracepoints is smaller than eight us reported in the sample_threshold.
The reason roots in the overhead of the entry and exit code that happens
before and after any interference execution. This justifies the dual
approach: measuring thread and tracing.
Link: https://lkml.kernel.org/r/e649467042d60e7b62714c9c6751a56299d15119.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
[
Made the following functions static:
trace_irqentry_callback()
trace_irqexit_callback()
trace_intel_irqentry_callback()
trace_intel_irqexit_callback()
Added to include/trace.h:
osnoise_arch_register()
osnoise_arch_unregister()
Fixed define logic for LATENCY_FS_NOTIFY
Reported-by: kernel test robot <lkp@intel.com>
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With the coming addition of the osnoise tracer, the configs needed to
include the latency_fsnotify() has become more complex, and to keep the
declaration in the header file the same as in the C file, just have the
logic needed to define it in one place, and that defines LATENCY_FS_NOTIFY
which will be used in the C code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The hwlat detector and (in preparation for) the osnoise/timerlat tracers
have a set of u64 parameters that the user can read/write via tracefs.
For instance, we have hwlat_detector's window and width.
To reduce the code duplication, hwlat's window and width share the same
read function. However, they do not share the write functions because
they do different parameter checks. For instance, the width needs to
be smaller than the window, while the window needs to be larger
than the window. The same pattern repeats on osnoise/timerlat, and
a large portion of the code was devoted to the write function.
Despite having different checks, the write functions have the same
structure:
read a user-space buffer
take the lock that protects the value
check for minimum and maximum acceptable values
save the value
release the lock
return success or error
To reduce the code duplication also in the write functions, this patch
provides a generic read and write implementation for u64 values that
need to be within some minimum and/or maximum parameters, while
(potentially) being protected by a lock.
To use this interface, the structure trace_min_max_param needs to be
filled:
struct trace_min_max_param {
struct mutex *lock;
u64 *val;
u64 *min;
u64 *max;
};
The desired value is stored on the variable pointed by *val. If *min
points to a minimum acceptable value, it will be checked during the
write operation. Likewise, if *max points to a maximum allowable value,
it will be checked during the write operation. Finally, if *lock points
to a mutex, it will be taken at the beginning of the operation and
released at the end.
The definition of a trace_min_max_param needs to passed as the
(private) *data for tracefs_create_file(), and the trace_min_max_fops
(added by this patch) as the *fops file_operations.
Link: https://lkml.kernel.org/r/3e35760a7c8b5c55f16ae5ad5fc54a0e71cbe647.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch only provides the implementation of the method.
Later we will used it in a combination with a new option for
function tracing.
Link: https://lkml.kernel.org/r/20210415181854.147448-5-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The field is used to keep track of the consecutive (on the same CPU) calls
of a single function. This information is needed in order to consolidate
the function tracing record in the cases when a single function is called
number of times.
Link: https://lkml.kernel.org/r/20210415181854.147448-4-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The event aims to consolidate the function tracing record in the cases
when a single function is called number of times consecutively.
while (cond)
do_func();
This may happen in various scenarios (busy waiting for example).
The new ftrace event can be used to show repeated function events with
a single event and save space on the ring buffer
Link: https://lkml.kernel.org/r/20210415181854.147448-3-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It is a common mistake for someone writing a trace event to save a pointer
to a string in the TP_fast_assign() and then display that string pointer
in the TP_printk() with %s. The problem is that those two events may happen
a long time apart, where the source of the string may no longer exist.
The proper way to handle displaying any string that is not guaranteed to be
in the kernel core rodata section, is to copy it into the ring buffer via
the __string(), __assign_str() and __get_str() helper macros.
Add a check at run time while displaying the TP_printk() of events to make
sure that every %s referenced is safe to dereference, and if it is not,
trigger a warning and only show the address of the pointer, and the
dereferenced string if it can be safely retrieved with a
strncpy_from_kernel_nofault() call.
In order to not have to copy the parsing of vsnprintf() formats, or even
exporting its code, the verifier relies on vsnprintf() being able to
modify the va_list that is passed to it, and it remains modified after it
is called. This is the case for some architectures like x86_64, but other
architectures like x86_32 pass the va_list to vsnprintf() as a value not a
reference, and the verifier can not use it to parse the non string
arguments. Thus, at boot up, it is checked if vsnprintf() modifies the
passed in va_list or not, and a static branch will disable the verifier if
it's not compatible.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a tracing_event_time_stamp() API that checks if the event passed in is
not on the ring buffer but a pointer to the per CPU trace_buffered_event
which does not have its time stamp set yet.
If it is a pointer to the trace_buffered_event, then just return the
current time stamp that the ring buffer would produce.
Otherwise, return the time stamp from the event.
Link: https://lkml.kernel.org/r/20210316164114.131996180@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, the trace histograms relies on it using absolute time stamps to
trigger the tracing to not use the temp buffer if filters are set. That's
because the histograms need the full timestamp that is saved in the ring
buffer. That is no longer the case, as the ring_buffer_event_time_stamp()
can now return the time stamp for all events without all triggering a full
absolute time stamp.
Now that the absolute time stamp is an unrelated dependency to not using
the filters. There's nothing about having absolute timestamps to keep from
using the filter buffer. Instead, change the interface to explicitly state
to disable filter buffering that the histogram logic can use.
Link: https://lkml.kernel.org/r/20210316164113.847886563@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ring_buffer_event_time_stamp() is going to be updated to extract the
time stamp for the event without needing it to be set to have absolute
values for all events. But to do so, it needs the buffer that the event is
on as the buffer saves information for the event before it is committed to
the buffer.
If the trace buffer is disabled, a temporary buffer is used, and there's
no access to this buffer from the current histogram triggers, even though
it is passed to the trace event code.
Pass the buffer that the event is on all the way down to the histogram
triggers.
Link: https://lkml.kernel.org/r/20210316164113.542448131@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A declaration of function "int trace_empty(struct trace_iterator *iter)"
shows up twice in the header file kernel/trace/trace.h
Link: https://lkml.kernel.org/r/20210304092348.208033-1-y.karadz@gmail.com
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add tracefs/options/hash-ptr option to show hashed pointer
value by %p in event printk format string.
For the security reason, normal printk will show the hashed
pointer value (encrypted by random number) with %p to printk
buffer to hide the real address. But the tracefs/trace always
shows real address for debug. To bridge those outputs, add an
option to switch the output format. Ftrace users can use it
to find the hashed value corresponding to the real address
in trace log.
Link: https://lkml.kernel.org/r/160277372504.29307.14909828808982012211.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
To help debugging kernel, show real address for trace event arguments
in tracefs/trace{,pipe} instead of hashed pointer value.
Since ftrace human-readable format uses vsprintf(), all %p are
translated to hash values instead of pointer address.
However, when debugging the kernel, raw address value gives a
hint when comparing with the memory mapping in the kernel.
(Those are sometimes used with crash log, which is not hashed too)
So converting %p with %px when calling trace_seq_printf().
Moreover, this is not improving the security because the tracefs
can be used only by root user and the raw address values are readable
from tracefs/percpu/cpu*/trace_pipe_raw file.
Link: https://lkml.kernel.org/r/160277370703.29307.5134475491761971203.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Delegate command parsing to each create function so that the
command syntax can be customized.
This requires changes to the kprobe/uprobe/synthetic event handling,
which are also included here.
Link: https://lkml.kernel.org/r/e488726f49cbdbc01568618f8680584306c4c79f.1612208610.git.zanussi@kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ zanussi@kernel.org: added synthetic event modifications ]
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The state of the interrupts (irqflags) and the preemption counter are
both passed down to tracing_generic_entry_update(). Only one bit of
irqflags is actually required: The on/off state. The complete 32bit
of the preemption counter isn't needed. Just whether of the upper bits
(softirq, hardirq and NMI) are set and the preemption depth is needed.
The irqflags and the preemption counter could be evaluated early and the
information stored in an integer `trace_ctx'.
tracing_generic_entry_update() would use the upper bits as the
TRACE_FLAG_* and the lower 8bit as the disabled-preemption depth
(considering that one must be substracted from the counter in one
special cases).
The actual preemption value is not used except for the tracing record.
The `irqflags' variable is mostly used only for the tracing record. An
exception here is for instance wakeup_tracer_call() or
probe_wakeup_sched_switch() which explicilty disable interrupts and use
that `irqflags' to save (and restore) the IRQ state and to record the
state.
Struct trace_event_buffer has also the `pc' and flags' members which can
be replaced with `trace_ctx' since their actual value is not used
outside of trace recording.
This will reduce tracing_generic_entry_update() to simply assign values
to struct trace_entry. The evaluation of the TRACE_FLAG_* bits is moved
to _tracing_gen_ctx_flags() which replaces preempt_count() and
local_save_flags() invocations.
As an example, ftrace_syscall_enter() may invoke:
- trace_buffer_lock_reserve() -> … -> tracing_generic_entry_update()
- event_trigger_unlock_commit()
-> ftrace_trace_stack() -> … -> tracing_generic_entry_update()
-> ftrace_trace_userstack() -> … -> tracing_generic_entry_update()
In this case the TRACE_FLAG_* bits were evaluated three times. By using
the `trace_ctx' they are evaluated once and assigned three times.
A build with all tracers enabled on x86-64 with and without the patch:
text data bss dec hex filename
21970669 17084168 7639260 46694097 2c87ed1 vmlinux.old
21970293 17084168 7639260 46693721 2c87d59 vmlinux.new
text shrank by 379 bytes, data remained constant.
Link: https://lkml.kernel.org/r/20210125194511.3924915-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, if a callback is registered to a ftrace function and its
ftrace_ops does not have the RECURSION flag set, it is encapsulated in a
helper function that does the recursion for it.
Really, all the callbacks should have their own recursion protection for
performance reasons. But they should not all implement their own. Move the
recursion helpers to global headers, so that all callbacks can use them.
Link: https://lkml.kernel.org/r/20201028115612.460535535@goodmis.org
Link: https://lkml.kernel.org/r/20201106023546.166456258@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When an interrupt or NMI comes in and switches the context, there's a delay
from when the preempt_count() shows the update. As the preempt_count() is
used to detect recursion having each context have its own bit get set when
tracing starts, and if that bit is already set, it is considered a recursion
and the function exits. But if this happens in that section where context
has changed but preempt_count() has not been updated, this will be
incorrectly flagged as a recursion.
To handle this case, create another bit call TRANSITION and test it if the
current context bit is already set. Flag the call as a recursion if the
TRANSITION bit is already set, and if not, set it and continue. The
TRANSITION bit will be cleared normally on the return of the function that
set it, or if the current context bit is clear, set it and clear the
TRANSITION bit to allow for another transition between the current context
and an even higher one.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The code that checks recursion will work to only do the recursion check once
if there's nested checks. The top one will do the check, the other nested
checks will see recursion was already checked and return zero for its "bit".
On the return side, nothing will be done if the "bit" is zero.
The problem is that zero is returned for the "good" bit when in NMI context.
This will set the bit for NMIs making it look like *all* NMI tracing is
recursing, and prevent tracing of anything in NMI context!
The simple fix is to return "bit + 1" and subtract that bit on the end to
get the real bit.
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
is_good_name() is useful for other trace infrastructure, such as
synthetic events, so make it available via trace.h.
Link: https://lkml.kernel.org/r/cc6d6a2d7da6957fcbe1e2922e76d18d2bb459b4.1602598160.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Initialize per-instance event list in early boot time (before
initializing instance directory on tracefs). This fixes boot-time
tracing to correctly handle the boot-time per-instance settings.
Link: https://lkml.kernel.org/r/160096560826.182763.17110991546046128881.stgit@devnote2
Fixes: 4114fbfd02 ("tracing: Enable creating new instance early boot")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Enable creating new trace_array instance in early boot stage.
If the instances directory is not created, postpone it until
the tracefs is initialized.
Link: https://lkml.kernel.org/r/159974154763.478751.6289753509587233103.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Current tracing_init_dentry() return a d_entry pointer, while is not
necessary. This function returns NULL on success or error on failure,
which means there is no valid d_entry pointer return.
Let's return 0 on success and negative value for error.
Link: https://lkml.kernel.org/r/20200712011036.70948-5-richard.weiyang@linux.alibaba.com
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tom Zanussi
Linus Torvalds
Steven Rostedt (Google)
Xiu Jianfeng
Masami Hiramatsu
Changbin Du
Tzvetomir Stoyanov (VMware)
Pingfan Liu
Tanner Love
Daniel Bristot de Oliveira
Yordan Karadzhov (VMware)
Ingo Molnar
Sebastian Andrzej Siewior
Joe Perches
Qiujun Huang
Wei Yang