Граф коммитов

18 Коммитов

Автор SHA1 Сообщение Дата
Leonid Yegoshin b0ce4bd535 MIPS: lib: memcpy: Add MIPS R6 support
MIPS R6 does not support the unaligned load and store instructions
so we add a special MIPS R6 case to copy one byte at a time if we
need to read/write to unaligned memory addresses.

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17 15:37:29 +00:00
Markos Chandras 51b1029d99 MIPS: lib: memcpy: Restore NOP on delay slot before returning to caller
Commit cf62a8b813 ("MIPS: lib: memcpy: Use macro to build the
copy_user code") switched to a macro in order to build the memcpy
symbols in preparation for the EVA support. However, this commit
also removed the NOP instruction after the 'jr ra' when returning
back to the caller. This had no visible side-effects since the next
instruction was a load to the t0 register which was already in the
clobbered list, but it may have undesired effects in the future
if some other code is introduced in between the .Ldone and
the .Ll_exc_copy labels.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org> # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8512/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19 18:22:08 +01:00
Markos Chandras cd26cb41ec MIPS: lib: memcpy: Add EVA support
Add copy_{to,from,in}_user when the CPU operates in EVA mode.
This is necessary so the EVA specific instructions can be used
to perform the virtual to physical translation for user space
addresses. We will use the non-EVA functions to read from kernel
if needed.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-03-26 23:09:14 +01:00
Markos Chandras cf62a8b813 MIPS: lib: memcpy: Use macro to build the copy_user code
The code can be shared between EVA and non-EVA configurations,
therefore use a macro to build it to avoid code duplications.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-03-26 23:09:14 +01:00
Markos Chandras bda4d986a6 MIPS: lib: memcpy: Split source and destination prefetch macros
In preparation for EVA support, the PREF macro is split into two
separate macros, PREFS and PREFD, for source and destination data
prefetching respectively.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-03-26 23:09:14 +01:00
Markos Chandras 5bc05971d3 MIPS: lib: memcpy: Merge EXC and load/store macros
Each load/store macro always adds an entry to the __ex_table
using the EXC macro. Therefore, these load/store macros are now merged
with the EXC one. The argument list is also expanded in order to make
the macro more flexible. The extra 'type' argument is not used by this
commit, but it will be used when the EVA support is added to the memcpy.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2014-03-26 23:09:14 +01:00
Ralf Baechle 7034228792 MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01 10:00:22 +01:00
David Daney bb0757ebb9 MIPS: Unify memcpy.S and memcpy-inatomic.S
We can save the 451 lines of code that comprise memcpy-inatomic.S at the
expense of a single instruction in the memcpy prolog.  We also use an
additional register (t6), so this may cause increased register pressure in
some places as well.  But I think the reduced maintenance burden, of not
having two nearly identical implementations, makes it worth it.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:55:55 +01:00
Ralf Baechle 634286f127 MIPS: IP27: Switch from DMA_IP27 to DMA_COHERENT
The special IP27 DMA code selected by DMA_IP27 has been removed a while
ago turning DMA_IP27 into almost a nop.  Also fixup the broken logic of
its last users memcpy.S and memcpy-inatomic.s.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-30 21:32:58 +00:00
Ralf Baechle c5ec1983e4 [MIPS] Eleminate local symbols from the symbol table.
These symbols appear in oprofile output, stacktraces and similar but only
make the output harder to read.  Many identical symbol names such as
"both_aligned" were also being used in multiple source files making it
impossible to see which file actually was meant.  So let's get rid of them.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:59 +00:00
Thomas Bogendoerfer 930bff8822 [MIPS] IP28: added cache barrier to assembly routines
IP28 needs special treatment to avoid speculative accesses. gcc
takes care for .c code, but for assembly code we need to do it
manually.

This is taken from Peter Fuersts IP28 patches.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:58 +00:00
Maciej W. Rozycki 619b6e18fc [MIPS] R4000/R4400 daddiu erratum workaround
This complements the generic R4000/R4400 errata workaround code and adds 
bits for the daddiu problem.  In most places it just modifies handwritten 
assembly code so that the assembler is allowed to use a temporary register 
as daddiu may now be treated as a macro that expands to a sequence of li 
and daddu.  It is the AT register or, where AT is unavailable or used 
explicitly for another purpose, an explicitly-named register is selected, 
using the .set at=<reg> feature added recently to gas.  This feature is 
only used if CONFIG_CPU_DADDI_WORKAROUNDS has been set, so if the 
workaround remains disabled, the required version of binutils stays 
unchanged.

 Similarly, daddiu instructions put in branch delay slots in noreorder 
fragments are now taken out of them and the assembler is allowed to 
reorder them itself as possible (which it does making the whole idea of 
scheduling them into delay slots manually questionable).

 Also in the very few places where such a simple conversion was not 
possible, a handcoded longer sequence is implemented.

 Other than that there are changes to code responsible for building the 
TLB fault and page clear/copy handlers to avoid daddiu as appropriate.  
These are only effective if the erratum is verified to be present at the 
run time.

 Finally there is a trivial update to __delay(), because it uses daddiu in 
a branch delay slot.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:55 +00:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ralf Baechle e5adb8770e Hack to resolve longstanding prefetch issue
Prefetching may be fatal on some systems if we're prefetching beyond the
end of memory on some systems.  It's also a seriously bad idea on non
dma-coherent systems.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:50 +01:00
Sam Ravnborg 048eb582f3 kbuild: mips use generic asm-offsets.h support
Removed obsolete stuff from arch makefile.
mips had a special rule for generating asm-offsets.h so preserved it
using an architecture specific hook in top-level Kbuild file.
Renamed .h file to asm-offsets.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 22:32:31 +02:00
Ralf Baechle 42a3b4f25a [PATCH] mips: nuke trailing whitespace
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:07 -07:00
Ralf Baechle 875d43e72b [PATCH] mips: clean up 32/64-bit configuration
Start cleaning 32-bit vs. 64-bit configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:06 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00