Add the PWM chip using devm_pwmchip_add() to avoid having to manually
remove it. This is useful for subsequent patches adding platform device
support.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
In preparation for adding other bus support, move the allocation
of the PWM structure out of the main driver code.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The dwc_pwm_probe() assigns dev to be &pci->dev but then uses &pci->dev
throughout the function. Change these all to the 'dev' variable to make
lines shorter.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The call to regmap_update_bits() which was responsible for clearing
the PWM output enable register bit was recently dropped in favor of
a call to regmap_clear_bits(), thereby simplifying the code.
Similarly, the call to regmap_update_bits() which sets the same bit
can be simplified with a call to regmap_set_bits().
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The registers are readable, so it's possible to implement the
.get_state() callback for this PWM.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
After a check of the manual it becomes obvious that the calculations in
.apply() are totally bogus:
FreqPWMOutx was always written as zero, so the period was fixed at
3413333.33 ns. However state->period wasn't checked at all.
The lower 10 bits of duty_cycle were just used as DutyPWMOutx. So if
a duty cycle of 512 ns (or 1536 ns) was requested, it actually
programmed 1710000 ns. Other values were wrong by the same factor.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
lp3943 is a platform driver that doesn't use any symbol provided in
<linux/i2c.h>. So drop the include.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the
register isn't correctly updated.
So ensure both status bits are set before clearing them.
Fixes: e70a540b4e ("pwm: Add STM32 LPTimer PWM driver")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Commit 2cfe9bbec5 added support for the
RGB and green PWM controlled LEDs on the HiFive Unmatched board
managed by the leds-pwm-multicolor and leds-pwm drivers respectively.
All three colours of the RGB LED and the green LED run from different
lines of the same PWM, but with the same period so this works fine when
the LED drivers are loaded one after the other.
Unfortunately it does expose a race in the PWM driver when both LED
drivers are loaded at roughly the same time. Here is an example:
| Thread A | Thread B |
| led_pwm_mc_probe | led_pwm_probe |
| devm_fwnode_pwm_get | |
| pwm_sifive_request | |
| ddata->user_count++ | |
| | devm_fwnode_pwm_get |
| | pwm_sifive_request |
| | ddata->user_count++ |
| ... | ... |
| pwm_state_apply | pwm_state_apply |
| pwm_sifive_apply | pwm_sifive_apply |
Now both calls to pwm_sifive_apply will see that ddata->approx_period,
initially 0, is different from the requested period and the clock needs
to be updated. But since ddata->user_count >= 2 both calls will fail
with -EBUSY, which will then cause both LED drivers to fail to probe.
Fix it by letting the first call to pwm_sifive_apply update the clock
even when ddata->user_count != 1.
Fixes: 9e37a53eb0 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Various changes across the board, mostly improvements and cleanups.
-----BEGIN PGP SIGNATURE-----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=IM51
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various changes across the board, mostly improvements and cleanups"
* tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits)
pwm: pca9685: Convert to i2c's .probe_new()
pwm: sun4i: Propagate errors in .get_state() to the caller
pwm: Handle .get_state() failures
pwm: sprd: Propagate errors in .get_state() to the caller
pwm: rockchip: Propagate errors in .get_state() to the caller
pwm: mtk-disp: Propagate errors in .get_state() to the caller
pwm: imx27: Propagate errors in .get_state() to the caller
pwm: cros-ec: Propagate errors in .get_state() to the caller
pwm: crc: Propagate errors in .get_state() to the caller
leds: qcom-lpg: Propagate errors in .get_state() to the caller
drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller
pwm/tracing: Also record trace events for failed API calls
pwm: Make .get_state() callback return an error code
pwm: pxa: Enable for MMP platform
pwm: pxa: Add reference manual link and limitations
pwm: pxa: Use abrupt shutdown mode
pwm: pxa: Remove clk enable/disable from pxa_pwm_config
pwm: pxa: Set duty cycle to 0 when disabling PWM
pwm: pxa: Remove pxa_pwm_enable/disable
pwm: mediatek: Add support for MT7986
...
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Link: https://lore.kernel.org/r/20221118224540.619276-538-uwe@kleine-koenig.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication now. Make use of it to
propagate an impossible prescaler encoding, should that have sneaked in
somehow.
Also check the return value of clk_get_rate(). That's unlikely to fail,
but we use that in two divide operations down in the code, so let's
avoid a divide-by-zero condition on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221201152223.3133-1-andre.przywara@arm.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This suppresses diagnosis for PWM_DEBUG routines and makes sure that
pwm->state isn't modified in pwm_device_request() if .get_state() fails.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() can return an error indication. Make use of it to propagate
failing hardware accesses.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Record and report an error code for the events. This allows to report
about failed calls without ambiguity and so gives a more complete
picture.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
.get_state() might fail in some cases. To make it possible that a driver
signals such a failure change the prototype of .get_state() to return an
error code.
This patch was created using coccinelle and the following semantic patch:
@p1@
identifier getstatefunc;
identifier driver;
@@
struct pwm_ops driver = {
...,
.get_state = getstatefunc
,...
};
@p2@
identifier p1.getstatefunc;
identifier chip, pwm, state;
@@
-void
+int
getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state)
{
...
- return;
+ return 0;
...
}
plus the actual change of the prototype in include/linux/pwm.h (plus some
manual fixing of indentions and empty lines).
So for now all drivers return success unconditionally. They are adapted
in the following patches to make the changes easier reviewable.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The PXA168, which is part of the MMP platform, also uses this driver.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-7-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add a pointer to the location of reference manuals for some of the
supported chips, and add a limitations section explaining the hardware's
PWM disable behavior.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-6-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Switch to abrupt shutdown mode in order to stop the clock as soon as
possible when PWM is disabled. This minimizes the possibility of the
clock being re-enabled while it is still in the process of turning off,
which will result in the clock ending up erroneously disabled.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-5-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Now that pxa_pwm_apply always enables the clock first, there is no need
for pxa_pwm_config to do any clock enabling/disabling.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-4-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
When disabling PWM, the duty cycle needs to be set to 0. This prevents
the previous duty cycle from showing up momentarily when the clock is
re-enabled next time.
Because the clock has to be running in order to configure the duty
cycle, unconditionally enable it early in pxa_pwm_apply and account for
the correct enable count at the end.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-3-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
These functions are only acting as wrappers for clk_prepare_enable and
clk_disable_unprepare now, so remove them to simplify the driver.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221113233639.24244-2-doug@schmorgal.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add support for PWM on MT7986 which has 2 PWM channels, one of them is
typically used for a temperature controlled fan.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Sam Shih <sam.shih@mediatek.com>
Link: https://lore.kernel.org/r/Y1K5ym1EL8kwzQEt@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
list_add() just overwrites the members of the element to add (here:
chip->list) without any checks, even in the DEBUG_LIST case. So save the
effort to initialize the list.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
alloc_pwms() only identified a free range of IDs and this range was marked
as used only later by pwmchip_add(). Instead let alloc_pwms() already do
the marking (which makes the function actually allocating the range and so
justifies the function name). This way access to the allocated_pwms
bitfield is limited to two functions only.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This simplifies error handling as the need for goto error handling goes
away and at the end of the function the code can be simplified as this
code isn't used in the error case any more.
Now memory allocation and the call to of_pwmchip_add() are done without
holding the lock. Both don't access the data structures protected by
&pwm_lock.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To simplify validation of the used locking, document for the global pwm
mutex what it actually protects against concurrent access. Also note for
two functions modifying these that pwm_lock is held by the caller.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117211143.3817381-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
According to MT7622 Reference Manual for Development Board v1.0 the PWM
unit found in the MT7622 SoC also comes with the PWM_CK_26M_SEL register
at offset 0x210 just like other modern MediaTek ARM64 SoCs.
And also MT7622 sets that register to 0x00000001 on reset which is
described as 'Select 26M fix CLK as BCLK' in the datasheet.
Hence set has_ck_26m_sel to true also for MT7622 which results in the
driver writing 0 to the PWM_CK_26M_SEL register which is described as
'Select bus CLK as BCLK'.
Fixes: 0c0ead7623 ("pwm: mediatek: Always use bus clock")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/Y1iF2slvSblf6bYK@makrotopia.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
lpc18xx_pwm_probe() only ensures clk_rate <= NSEC_PER_SEC, the following
reasoning is right even under this slightly lesser condition.
Fixes: 8933d30c5f ("pwm: lpc18xx: Fix period handling")
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20221108153013.132514-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
In the original mtk_disp_pwm_get_state() function wrongly uses bit 0 of
CON0 to judge if the PWM is enabled.
However that is indicated by a bit (at a machine dependent position) in
the DISP_PWM_EN register. Fix this accordingly.
Fixes: 3f2b167349 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/1666172538-11652-1-git-send-email-xinlei.lee@mediatek.com
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
As was documented in commit 0f02f491b7 ("pwm: sifive: Reduce time the
controller lock is held") a caller of pwm_sifive_update_clock() must
hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock.
While this necessity was only documented later, the race exists since
the driver was introduced.
Fixes: 9e37a53eb0 ("pwm: sifive: Add a driver for SiFive SoC PWM")
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Simplify a bit the code by using regmap_set_bits() and
regmap_clear_bits() instead of regmap_update_bits() when possible.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The MACH_INGENIC Kconfig option will be selected when building a kernel
targeting Ingenic SoCs, but also when compiling a generic MIPS kernel
that happens to support Ingenic SoCs.
Therefore, if MACH_INGENIC is not set, we know that we're not even
trying to build a generic kernel that supports these SoCs, and we can
hide the options to compile the SoC-specific drivers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Ingenic SoCs all require CONFIG_OF, so there is no case where we want to
use this driver without CONFIG_OF.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The pwm_lpss_probe() uses managed resources. Show this to
the users explicitly by adding devm prefix to its name.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The PWM LPSS device can be embedded in another device.
In order to enable it, allow that drivers to probe
a corresponding device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
For the sake of integrity, include headers we are the direct
user of.
Replace the inclusion of device.h by a forward declaration
of struct device plus a (cheaper) of types.h as device.h is
an expensive include (measured in compiler effort).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The MAX_PWMS definition is already being used by the PWM core.
Using the same name in the certain driver confuses people
and potentially can clash with it.
Hence, rename it by adding LPSS prefix.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The value of NSEC_PER_SEC << PWM_DUTY_WIDTH doesn't fix within a 32 bit
integer causing a build warning/error (and the value truncated):
drivers/pwm/pwm-tegra.c: In function ‘tegra_pwm_config’:
drivers/pwm/pwm-tegra.c:148:53: error: result of ‘1000000000 << 8’ requires 39 bits to represent, but ‘long int’ only has 32 bits [-Werror=shift-overflow=]
148 | required_clk_rate = DIV_ROUND_UP_ULL(NSEC_PER_SEC << PWM_DUTY_WIDTH,
| ^~
Explicitly cast to a u64 to ensure the correct result.
Fixes: cfcb68817fb3 ("pwm: tegra: Improve required rate calculation")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Ben Dooks
Jeff LaBundy
Uwe Kleine-König
Fabrice Gasnier
Emil Renner Berthing
Linus Torvalds
Andre Przywara
Doug Brown
Daniel Golle
Andy Shevchenko
xinlei lee
Paul Cercueil
Steven Price