On every iteration of net_dim, the algorithm may choose to
check for the system state by comparing current data sample
with previous data sample. After each of these comparison,
regardless of the action taken, the sample used as baseline
is needed to be updated.
This patch fixes a bug that causes DIM to take wrong decisions,
due to never updating the baseline sample for comparison between
iterations. This way, DIM always compares current sample with
zeros.
Although this is a functional fix, it also improves and stabilizes
performance as the algorithm works properly now.
Performance:
Tested single UDP TX stream with pktgen:
samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1
-m 24:8a:07:88:26:8b -f 3 -b 128
ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps.
Also, toggling between profiles is less frequent with the fix.
Fixes: 8115b750db ("net/dim: use struct net_dim_sample as arg to net_dim")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rfc8435 says:
For tight coupling, ffds_stateid provides the stateid to be used by
the client to access the file.
However current implementation replaces per-mirror provided stateid with
by open or lock stateid.
Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and
nfs4_ff_layout_prepare_ds.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Bruce pointed out that we shouldn't allocate memory while holding
a lock in the nfs4_callback_offload() and handle_async_copy()
that deal with a racing CB_OFFLOAD and reply to COPY case.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The only significant change is for OSS PCM emulation to convert
with kvcalloc() to address both performance and security issues.
It's a pretty straightforward change, which should be safe.
The rest are, as usual, device-specific small fixes for HD-audio.
-----BEGIN PGP SIGNATURE-----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=ISp2
-----END PGP SIGNATURE-----
Merge tag 'sound-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only significant change is for OSS PCM emulation to convert with
kvcalloc() to address both performance and security issues. It's a
pretty straightforward change, which should be safe.
The rest are, as usual, device-specific small fixes for HD-audio"
* tag 'sound-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/ca0132 - fix AE-5 pincfg
ALSA: hda/ca0132 - Add new ZxR quirk
ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap()
ALSA: hda/realtek - Add quirk entry for HP Pavilion 15
ALSA: oss: Use kvzalloc() for local buffer allocations
Here are some small char/misc driver fixes for issues that have been
reported.
Nothing major, highlights include:
- gnss sync write fixes
- uio oops fix
- nvmem fixes
- other minor fixes and some documentation/maintainers updates
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW/ZqSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks8gCgm0Amv9/GLpE7qZqe/Az2S7t7pm4An2NHYfS1
/vrBi80OCiSLGakl/zs2
=MYVD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for issues that have been
reported.
Nothing major, highlights include:
- gnss sync write fixes
- uio oops fix
- nvmem fixes
- other minor fixes and some documentation/maintainers updates
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/security-bugs: Postpone fix publication in exceptional cases
MAINTAINERS: Add Sasha as a stable branch maintainer
gnss: sirf: fix synchronous write timeout
gnss: serial: fix synchronous write timeout
uio: Fix an Oops on load
test_firmware: fix error return getting clobbered
nvmem: core: fix regression in of_nvmem_cell_get()
misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data
drivers/misc/sgi-gru: fix Spectre v1 vulnerability
Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up
slimbus: ngd: remove unnecessary check
Here are a number of small USB fixes for 4.20-rc4.
There's the usual xhci and dwc2/3 fixes as well as a few minor other
issues resolved for problems that have been reported. Full details are
in the shortlog.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW/ZsOg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymPlACeO1ii05UG6Mb47AC0sZbgMk5diWwAnRK3A0Pe
fSupZy5v6u1HBEormFco
=5k0S
-----END PGP SIGNATURE-----
Merge tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 4.20-rc4.
There's the usual xhci and dwc2/3 fixes as well as a few minor other
issues resolved for problems that have been reported. Full details are
in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdc-acm: add entry for Hiro (Conexant) modem
usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
usb: core: Fix hub port connection events lost
usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
usb: dwc2: pci: Fix an error code in probe
usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()
xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc
usb: xhci: fix timeout for transition from RExit to U0
usb: xhci: fix uninitialized completion when USB3 port got wrong status
xhci: Add check for invalid byte size error when UAS devices are connected.
xhci: handle port status events for removed USB3 hcd
xhci: Fix leaking USB3 shared_hcd at xhci removal
USB: misc: appledisplay: add 20" Apple Cinema Display
USB: quirks: Add no-lpm quirk for Raydium touchscreens
usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB
USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub
usb: dwc3: gadget: Properly check last unaligned/zero chain TRB
usb: dwc3: core: Clean up ULPI device
- Various fixes related to the SFDP parsing code merged in 4.20
- Fix for a page fault in the cadence-qspi
NAND fixes:
- Fix a macro name conflict between the QCOM NAND controller driver
and the RISC-V asm headers
- Fix of-node handling in the atmel driver
-----BEGIN PGP SIGNATURE-----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=9R0Y
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
"SPI NOR fixes:
- Various fixes related to the SFDP parsing code merged in 4.20
- Fix for a page fault in the cadence-qspi
NAND fixes:
- Fix a macro name conflict between the QCOM NAND controller driver
and the RISC-V asm headers
- Fix of-node handling in the atmel driver"
* tag 'mtd/fixes-for-4.20-rc4' of git://git.infradead.org/linux-mtd:
mtd: spi-nor: fix selection of uniform erase type in flexible conf
mtd: spi-nor: Fix Cadence QSPI page fault kernel panic
mtd: rawnand: qcom: Namespace prefix some commands
mtd: rawnand: atmel: fix OF child-node lookup
mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw()
mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use()
mtd: spi-nor: fix iteration over smpt array
mtd: spi-nor: don't drop sfdp data if optional parsers fail
Two small fixes. The qla2xxx is a regression from 4.18 and the ufs
one is a device enablement fix.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW/Yo4CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaVLAQCHzxoa
RFlf8FXz+LTT1AVI7mbKTh3Kfv/8fIDRXd9OPQD+M0p45olpmk3a4EqHSm+jW7ue
JxsGplw8HCTEsvHrRqw=
=GBzo
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes.
The qla2xxx is a regression from 4.18 and the ufs one is a device
enablement fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC
scsi: qla2xxx: Timeouts occur on surprise removal of QLogic adapter
memunmap() should be used to free the return of memremap(), not
iounmap().
Fixes: dfddb969ed ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit aaf9978c3c.
Quoting Peter:
There is a HID feature report called "Resolution Multiplier"
Described in the "Enhanced Wheel Support in Windows" doc and
the "USB HID Usage Tables" page 30.
http://download.microsoft.com/download/b/d/1/bd1f7ef4-7d72-419e-bc5c-9f79ad7bb66e/wheel.docxhttps://www.usb.org/sites/default/files/documents/hut1_12v2.pdf
This was new for Windows Vista, so we're only a decade behind here. I only
accidentally found this a few days ago while debugging a stuck button on a
Microsoft mouse.
The docs above describe it like this: a wheel control by default sends
value 1 per notch. If the resolution multiplier is active, the wheel is
expected to send a value of $multiplier per notch (e.g. MS Sculpt mouse) or
just send events more often, i.e. for less physical motion (e.g. MS Comfort
mouse).
For the latter, you need the right HW of course. The Sculpt mouse has
tactile wheel clicks, so nothing really changes. The Comfort mouse has
continuous motion with no tactile clicks. Similar to the free-wheeling
Logitech mice but without any inertia.
Note that the doc also says that Vista and onwards *always* enable this
feature where available.
An example HID definition looks like this:
Usage Page Generic Desktop (0x01)
Usage Resolution Multiplier (0x48)
Logical Minimum 0
Logical Maximum 1
Physical Minimum 1
Physical Maximum 16
Report Size 2 # in bits
Report Count 1
Feature (Data, Var, Abs)
So the actual bits have values 0 or 1 and that reflects real values 1 or 16.
We've only seen single-bits so far, so there's low-res and hi-res, but
nothing in between.
The multiplier is available for HID usages "Wheel" and "AC Pan" (horiz wheel).
Microsoft suggests that
> Vendors should ship their devices with smooth scrolling disabled and allow
> Windows to enable it. This ensures that the device works like a regular HID
> device on legacy operating systems that do not support smooth scrolling.
(see the wheel doc linked above)
The mice that we tested so far do reset on unplug.
Device Support looks to be all (?) Microsoft mice but nothing else
Not supported:
- Logitech G500s, G303
- Roccat Kone XTD
- all the cheap Lenovo, HP, Dell, Logitech USB mice that come with a
workstation that I could find don't have it.
- Etekcity something something
- Razer Imperator
Supported:
- Microsoft Comfort Optical Mouse 3000 - yes, physical: 1:4
- Microsoft Sculpt Ergonomic Mouse - yes, physical: 1:12
- Microsoft Surface mouse - yes, physical: 1:4
So again, I think this is really just available on Microsoft mice, but
probably all decent MS mice released over the last decade.
Looking at the hardware itself:
- no noticeable notches in the weel
- low-res: 18 events per 360deg rotation (click angle 20 deg)
- high-res: 72 events per 360deg → matches multiplier of 4
- I can feel the notches during wheel turns
- low-res: 24 events per 360 deg rotation (click angle 15 deg)
- horiz wheel is tilt-based, continuous output value 1
- high-res: 24 events per 360deg with value 12 → matches multiplier of 12
- horiz wheel output rate doubles/triples?, values is 3
- It's a touch strip, not a wheel so no notches
- high-res: events have value 4 instead of 1
a bit strange given that it doesn't actually have notches.
Ok, why is this an issue for the current API? First, because the logitech
multiplier used in Harry's patches looks suspiciously like the Resolution
Multiplier so I think we should assume it's the same thing. Nestor, can you
shed some light on that?
- `REL_WHEEL` is defined as the number of notches, emulated where needed.
- `REL_WHEEL_HI_RES` is the movement of the user's finger in microns.
- `WM_MOUSEWHEEL` (Windows) is is a multiple of 120, defined as "the threshold
for action to be taken and one such action"
https://docs.microsoft.com/en-us/windows/desktop/inputdev/wm-mousewheel
If the multiplier is set to M, this means we need an accumulated value of M
until we can claim there was a wheel click. So after enabling the multiplier
and setting it to the maximum (like Windows):
- M units are 15deg rotation → 1 unit is 2620/M micron (see below). This is
the `REL_WHEEL_HI_RES` value.
- wheel diameter 20mm: 15 deg rotation is 2.62mm, 2620 micron (pi * 20mm /
(360deg/15deg))
- For every M units accumulated, send one `REL_WHEEL` event
The problem here is that we've now hardcoded 20mm/15 deg into the kernel and
we have no way of getting the size of the wheel or the click angle into the
kernel.
In userspace we now have to undo the kernel's calculation. If our click angle
is e.g. 20 degree we have to undo the (lossy) calculation from the kernel and
calculate the correct angle instead. This also means the 15 is a hardcoded
option forever and cannot be changed.
In hid-logitech-hidpp.c, the microns per unit is hardcoded per device.
Harry, did you measure those by hand? We'd need to update the kernel for
every device and there are 10 years worth of devices from MS alone.
The multiplier default is 8 which is in the right ballpark, so I'm pretty
sure this is the same as the Resolution Multiplier, just in HID++ lingo. And
given that the 120 magic factor is what Windows uses in the end, I can't
imagine Logitech rolling their own thing here. Nestor?
And we're already fairly inaccurate with the microns anyway. The MX Anywhere
2S has a click angle of 20 degrees (18 stops) and a 17mm wheel, so a wheel
notch is approximately 2.67mm, one event at multiplier 8 (1/8 of a notch)
would be 334 micron. That's only 80% of the fallback value of 406 in the
kernel. Multiplier 6 gives us 445micron (10% off). I'm assuming multiplier 7
doesn't exist because it's not a factor of 120.
Summary:
Best option may be to simply do what Windows is doing, all the HW manufacturers
have to use that approach after all. Switch `REL_WHEEL_HI_RES` to report in
fractions of 120, with 120 being one notch and divide that by the multiplier
for the actual events. So e.g. the Logitech multiplier 8 would send value 15
for each event in hi-res mode. This can be converted in userspace to
whatever userspace needs (combined with a hwdb there that tells you wheel
size/click angle/...).
Conflicts:
include/uapi/linux/input-event-codes.h -> I kept the new
reserved event in the code, so I had to adapt the revert
slightly
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 1ff2e1a44e.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 051dc9b057.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit d56ca9855b.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 3fe1d6bbcd.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 5fe2ccbef9.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 044ee89028.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
- OD fixes for powerplay
- Vega20 fixes
- KFD fix for Kaveri
- add missing firmware declaration for hainan (SI chip)
- Fix DC user experience regressions related to panels that support >8 bpc
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121163647.2847-1-alexander.deucher@amd.com
In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.
In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".
[V2]
Remove unnecessary curly braces.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value of pitches is not correct while calling mode_set.
The issue we found so far on following system:
- Debian8 with XFCE Desktop
- Ubuntu with KDE Desktop
- SUSE15 with KDE Desktop
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ursula Braun says:
====================
net/smc: fixes 2018-11-12
here is V4 of some net/smc fixes in different areas for the net tree.
v1->v2:
do not define 8-byte alignment for union smcd_cdc_cursor in
patch 4/5 "net/smc: atomic SMCD cursor handling"
v2->v3:
stay with 8-byte alignment for union smcd_cdc_cursor in
patch 4/5 "net/smc: atomic SMCD cursor handling", but get rid of
__packed for struct smcd_cdc_msg
v3->v4:
get rid of another __packed for struct smc_cdc_msg in
patch 4/5 "net/smc: atomic SMCD cursor handling"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_wr_tx_put_slot() field pend->idx is used after being
cleared. That means always idx 0 is cleared in the wr_tx_mask.
This results in a broken administration of available WR send
payload buffers.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Running uperf tests with SMCD on LPARs results in corrupted cursors.
SMCD cursors should be treated atomically to fix cursor corruption.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a SMC-D link group is freed, a shutdown signal should be sent to
the peer to indicate that the link group is invalid. This patch adds the
shutdown signal to the SMC code.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When searching for an existing link group the queue pair number is also
to be taken into consideration. When the SMC server sends a new number
in a CLC packet (keeping all other values equal) then a new link group
is to be created on the SMC client side.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of a non-blocking SMC socket, the initial CLC handshake is
performed over a blocking TCP connection in a worker. If the SMC socket
is released, smc_release has to wait for the blocking CLC socket
operations (e.g., kernel_connect) inside the worker.
This patch aborts a CLC connection when the respective non-blocking SMC
socket is released to avoid waiting on socket operations or timeouts.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
First set of fixes for 4.20, this time we have quite a few them but
all very small.
ath9k
* fix a locking regression found by a static checker
wlcore
* fix a crash which was a regression with wakeirq handling
brcm80211
* yet another fix for 160 MHz channel handling
mt76
* fix a longstaning build problem when CONFIG_LEDS_CLASS is disabled
* don't use uninitialised mutex
iwlwifi
* do note that the iwlwifi merge tag (commit 4ec321c146) seems to
contain wrong list of changes so ignore that
* fix ACPI data handling, a memory leak and other smaller fixes
ath10k
* fix a crash during suspend which was a recent regression
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb9CR9AAoJEG4XJFUm622bMdAH/2z0jY38RTPqLYH7BKfIzQkB
M8GC4bi0c3NexkwS+S0xLr6A5FyTcbi2pKOqdZ2eXEoiopso5OocWXYnIw0IDA9C
ll5aI4DfIoqTIVBvYWp/Rnar67oRAfND5z3iOnu0C34KNiMbUY2WfJ6RUTo+gjZ4
Wokaf6EWOCODDtL2atBtvT96JSlM7t398aUksKzcOGX+0XPGYfyho/wQGZIYE9iQ
Exgmp9KyBBlQugu+EyGH+Dxt8J+1sSveIJXnfaCb9avtpo+C/SG7+pnJhX8ij7fH
+pYuWOq/YyliUVHVxfpK5+lVJB3ICGezbZ6xp3G3MURBqdX/E2oouFJvyKrESPc=
=je2r
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2018-11-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.20
First set of fixes for 4.20, this time we have quite a few them but
all very small.
ath9k
* fix a locking regression found by a static checker
wlcore
* fix a crash which was a regression with wakeirq handling
brcm80211
* yet another fix for 160 MHz channel handling
mt76
* fix a longstaning build problem when CONFIG_LEDS_CLASS is disabled
* don't use uninitialised mutex
iwlwifi
* do note that the iwlwifi merge tag (commit 4ec321c146) seems to
contain wrong list of changes so ignore that
* fix ACPI data handling, a memory leak and other smaller fixes
ath10k
* fix a crash during suspend which was a recent regression
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jean-Louis reported a TCP regression and bisected to recent SACK
compression.
After a loss episode (receiver not able to keep up and dropping
packets because its backlog is full), linux TCP stack is sending
a single SACK (DUPACK).
Sender waits a full RTO timer before recovering losses.
While RFC 6675 says in section 5, "Algorithm Details",
(2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true --
indicating at least three segments have arrived above the current
cumulative acknowledgment point, which is taken to indicate loss
-- go to step (4).
...
(4) Invoke fast retransmit and enter loss recovery as follows:
there are old TCP stacks not implementing this strategy, and
still counting the dupacks before starting fast retransmit.
While these stacks probably perform poorly when receivers implement
LRO/GRO, we should be a little more gentle to them.
This patch makes sure we do not enable SACK compression unless
3 dupacks have been sent since last rcv_nxt update.
Ideally we should even rearm the timer to send one or two
more DUPACK if no more packets are coming, but that will
be work aiming for linux-4.21.
Many thanks to Jean-Louis for bisecting the issue, providing
packet captures and testing this patch.
Fixes: 5d9f4262b7 ("tcp: add SACK compression")
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a packet is trapped and the corresponding SKB marked as
already-forwarded, it retains this marking even after it is forwarded
across veth links into another bridge. There, since it ingresses the
bridge over veth, which doesn't have offload_fwd_mark, it triggers a
warning in nbp_switchdev_frame_mark().
Then nbp_switchdev_allowed_egress() decides not to allow egress from
this bridge through another veth, because the SKB is already marked, and
the mark (of 0) of course matches. Thus the packet is incorrectly
blocked.
Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That
function is called from tunnels and also from veth, and thus catches the
cases where traffic is forwarded between bridges and transformed in a
way that invalidates the marking.
Fixes: 6bc506b4fb ("bridge: switchdev: Add forward mark support for stacked devices")
Fixes: abf4bb6b63 ("skbuff: Add the offload_mr_fwd_mark field")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This week is a bit bigger than I expected. That's my fault, as I missed
a few patches while I was at Plumbers last week. We have:
* A fix to a quite embarassing issue where raw_copy_to_user() was
implemented with asm_copy_from_user() (and vice versa).
* Improvements to our makefile to allow flat binaries to be generated.
* A build fix that predeclares "struct module" at the top of
<asm/module.h>, which triggers warnings later in that header.
* The addition of our own <uapi/asm/unistd> header, which is necessary
to align our stat ABI on 32-bit systems.
* A fix to avoid printing a warning when the S or U bits are set in
print_isa().
I already have one patch in the queue for next week.
-----BEGIN PGP SIGNATURE-----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=xGZd
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"This week is a bit bigger than I expected. That's my fault, as I
missed a few patches while I was at Plumbers last week. We have:
- A fix to a quite embarassing issue where raw_copy_to_user() was
implemented with asm_copy_from_user() (and vice versa).
- Improvements to our makefile to allow flat binaries to be
generated.
- A build fix that predeclares "struct module" at the top of
<asm/module.h>, which triggers warnings later in that header.
- The addition of our own <uapi/asm/unistd> header, which is
necessary to align our stat ABI on 32-bit systems.
- A fix to avoid printing a warning when the S or U bits are set in
print_isa().
I already have one patch in the queue for next week"
* tag 'riscv-for-linus-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: recognize S/U mode bits in print_isa
riscv: add asm/unistd.h UAPI header
riscv: fix warning in arch/riscv/include/asm/module.h
RISC-V: Build flat and compressed kernel images
RISC-V: Fix raw_copy_{to,from}_user()
When we read the EOF page of the file via readpages, we need
to zero the region beyond EOF that we either do not read or
should not contain data so that mmap does not expose stale data to
user applications.
However, iomap_adjust_read_range() fails to detect EOF correctly,
and so fsx on 1k block size filesystems fails very quickly with
mapreads exposing data beyond EOF. There are two problems here.
Firstly, when calculating the end block of the EOF byte, we have
to round the size by one to avoid a block aligned EOF from reporting
a block too large. i.e. a size of 1024 bytes is 1 block, which in
index terms is block 0. Therefore we have to calculate the end block
from (isize - 1), not isize.
The second bug is determining if the current page spans EOF, and so
whether we need split it into two half, one for the IO, and the
other for zeroing. Unfortunately, the code that checks whether
we should split the block doesn't actually check if we span EOF, it
just checks if the read spans the /offset in the page/ that EOF
sits on. So it splits every read into two if EOF is not page
aligned, regardless of whether we are reading the EOF block or not.
Hence we need to restrict the "does the read span EOF" check to
just the page that spans EOF, not every page we read.
This patch results in correct EOF detection through readpages:
xfs_vm_readpages: dev 259:0 ino 0x43 nr_pages 24
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x4f000 count 98304 type hole startoff 0x13c startblock 1368 blockcount 0x4
iomap_readpage_actor: orig pos 323584 pos 323584, length 4096, poff 0 plen 4096, isize 420864
xfs_iomap_found: dev 259:0 ino 0x43 size 0x66c00 offset 0x50000 count 94208 type hole startoff 0x140 startblock 1497 blockcount 0x5c
iomap_readpage_actor: orig pos 327680 pos 327680, length 94208, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 331776 pos 331776, length 90112, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 335872 pos 335872, length 86016, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 339968 pos 339968, length 81920, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 344064 pos 344064, length 77824, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 348160 pos 348160, length 73728, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 352256 pos 352256, length 69632, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 356352 pos 356352, length 65536, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 360448 pos 360448, length 61440, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 364544 pos 364544, length 57344, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 368640 pos 368640, length 53248, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 372736 pos 372736, length 49152, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 376832 pos 376832, length 45056, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 380928 pos 380928, length 40960, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 385024 pos 385024, length 36864, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 389120 pos 389120, length 32768, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 393216 pos 393216, length 28672, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 397312 pos 397312, length 24576, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 401408 pos 401408, length 20480, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 405504 pos 405504, length 16384, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 409600 pos 409600, length 12288, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 413696 pos 413696, length 8192, poff 0 plen 4096, isize 420864
iomap_readpage_actor: orig pos 417792 pos 417792, length 4096, poff 0 plen 3072, isize 420864
iomap_readpage_actor: orig pos 420864 pos 420864, length 1024, poff 3072 plen 1024, isize 420864
As you can see, it now does full page reads until the last one which
is split correctly at the block aligned EOF, reading 3072 bytes and
zeroing the last 1024 bytes. The original version of the patch got
this right, but it got another case wrong.
The EOF detection crossing really needs to the the original length
as plen, while it starts at the end of the block, will be shortened
as up-to-date blocks are found on the page. This means "orig_pos +
plen" no longer points to the end of the page, and so will not
correctly detect EOF crossing. Hence we have to use the length
passed in to detect this partial page case:
xfs_filemap_fault: dev 259:1 ino 0x43 write_fault 0
xfs_vm_readpage: dev 259:1 ino 0x43 nr_pages 1
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2c000 count 4096 type hole startoff 0xb0 startblock 282 blockcount 0x4
iomap_readpage_actor: orig pos 180224 pos 181248, length 4096, poff 1024 plen 2048, isize 183296
xfs_iomap_found: dev 259:1 ino 0x43 size 0x2cc00 offset 0x2cc00 count 1024 type hole startoff 0xb3 startblock 285 blockcount 0x1
iomap_readpage_actor: orig pos 183296 pos 183296, length 1024, poff 3072 plen 1024, isize 183296
Heere we see a trace where the first block on the EOF page is up to
date, hence poff = 1024 bytes. The offset into the page of EOF is
3072, so the range we want to read is 1024 - 3071, and the range we
want to zero is 3072 - 4095. You can see this is split correctly
now.
This fixes the stale data beyond EOF problem that fsx quickly
uncovers on 1k block size filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It returns EINVAL when the operation is not supported by the
filesystem. Fix it to return EOPNOTSUPP to be consistent with
the man page and clone_file_range().
Clean up the inconsistent error return handling while I'm there.
(I know, lipstick on a pig, but every little bit helps...)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When doing direct IO to a pipe for do_splice_direct(), then pipe is
trivial to fill up and overflow as it can only hold 16 pages. At
this point bio_iov_iter_get_pages() then returns -EFAULT, and we
abort the IO submission process. Unfortunately, iomap_dio_rw()
propagates the error back up the stack.
The error is converted from the EFAULT to EAGAIN in
generic_file_splice_read() to tell the splice layers that the pipe
is full. do_splice_direct() completely fails to handle EAGAIN errors
(it aborts on error) and returns EAGAIN to the caller.
copy_file_write() then completely fails to handle EAGAIN as well,
and so returns EAGAIN to userspace, having failed to copy the data
it was asked to.
Avoid this whole steaming pile of fail by having iomap_dio_rw()
silently swallow EFAULT errors and so do short reads.
To make matters worse, iomap_dio_actor() has a stale data exposure
bug bio_iov_iter_get_pages() fails - it does not zero the tail block
that it may have been left uncovered by partial IO. Fix the error
handling case to drop to the sub-block zeroing rather than
immmediately returning the -EFAULT error.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we are doing sub-block dio that extends EOF, we need to zero
the unused tail of the block to initialise the data in it it. If we
do not zero the tail of the block, then an immediate mmap read of
the EOF block will expose stale data beyond EOF to userspace. Found
with fsx running sub-block DIO sizes vs MAPREAD/MAPWRITE operations.
Fix this by detecting if the end of the DIO write is beyond EOF
and zeroing the tail if necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we write into an unwritten extent via direct IO, we dirty
metadata on IO completion to convert the unwritten extent to
written. However, when we do the FUA optimisation checks, the inode
may be clean and so we issue a FUA write into the unwritten extent.
This means we then bypass the generic_write_sync() call after
unwritten extent conversion has ben done and we don't force the
modified metadata to stable storage.
This violates O_DSYNC semantics. The window of exposure is a single
IO, as the next DIO write will see the inode has dirty metadata and
hence will not use the FUA optimisation. Calling
generic_write_sync() after completion of the second IO will also
sync the first write and it's metadata.
Fix this by avoiding the FUA optimisation when writing to unwritten
extents.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Long saga. There have been days spent following this through dead end
after dead end in multi-GB event traces. This morning, after writing
a trace-cmd wrapper that enabled me to be more selective about XFS
trace points, I discovered that I could get just enough essential
tracepoints enabled that there was a 50:50 chance the fsx config
would fail at ~115k ops. If it didn't fail at op 115547, I stopped
fsx at op 115548 anyway.
That gave me two traces - one where the problem manifested, and one
where it didn't. After refining the traces to have the necessary
information, I found that in the failing case there was a real
extent in the COW fork compared to an unwritten extent in the
working case.
Walking back through the two traces to the point where the CWO fork
extents actually diverged, I found that the bad case had an extra
unwritten extent in it. This is likely because the bug it led me to
had triggered multiple times in those 115k ops, leaving stray
COW extents around. What I saw was a COW delalloc conversion to an
unwritten extent (as they should always be through
xfs_iomap_write_allocate()) resulted in a /written extent/:
xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0
xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real
xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real
xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex
Basically, Cow fork before:
0 1 32 52
+H+DDDDDDDDDDDD+UUUUUUUUUUU+
PREV RIGHT
COW delalloc conversion allocates:
1 32
+uuuuuuuuuuuu+
NEW
And the result according to the xfs_bmap_post_update trace was:
0 1 32 52
+H+wwwwwwwwwwwwwwwwwwwwwwww+
PREV
Which is clearly wrong - it should be a merged unwritten extent,
not an unwritten extent.
That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG
case in xfs_bmap_add_extent_delay_real(), and sure enough, there's
the bug.
It takes the old delalloc extent (PREV) and adds the length of the
RIGHT extent to it, takes the start block from NEW, removes the
RIGHT extent and then updates PREV with the new extent.
What it fails to do is update PREV.br_state. For delalloc, this is
always XFS_EXT_NORM, while in this case we are converting the
delayed allocation to unwritten, so it needs to be updated to
XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so
the resultant extent is always written.
And that's the bug I've been chasing for a week - a bmap btree bug,
not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced
with the recent in core extent tree scalability enhancements.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
On a sub-page block size filesystem, fsx is failing with a data
corruption after a series of operations involving copying a file
with the destination offset beyond EOF of the destination of the file:
8093(157 mod 256): TRUNCATE DOWN from 0x7a120 to 0x50000 ******WWWW
8094(158 mod 256): INSERT 0x25000 thru 0x25fff (0x1000 bytes)
8095(159 mod 256): COPY 0x18000 thru 0x1afff (0x3000 bytes) to 0x2f400
8096(160 mod 256): WRITE 0x5da00 thru 0x651ff (0x7800 bytes) HOLE
8097(161 mod 256): COPY 0x2000 thru 0x5fff (0x4000 bytes) to 0x6fc00
The second copy here is beyond EOF, and it is to sub-page (4k) but
block aligned (1k) offset. The clone runs the EOF zeroing, landing
in a pre-existing post-eof delalloc extent. This zeroes the post-eof
extents in the page cache just fine, dirtying the pages correctly.
The problem is that xfs_reflink_remap_prep() now truncates the page
cache over the range that it is copying it to, and rounds that down
to cover the entire start page. This removes the dirty page over the
delalloc extent from the page cache without having written it back.
Hence later, when the page cache is flushed, the page at offset
0x6f000 has not been written back and hence exposes stale data,
which fsx trips over less than 10 operations later.
Fix this by changing xfs_reflink_remap_prep() to use
xfs_flush_unmap_range().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If swiotlb_bounce_page() failed, calling arch_sync_dma_for_device() may
lead to such delights as performing cache maintenance on whatever
address phys_to_virt(SWIOTLB_MAP_ERROR) looks like, which is typically
outside the kernel memory map and goes about as well as expected.
Don't do that.
Fixes: a4a4330db4 ("swiotlb: add support for non-coherent DMA")
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
With the overflow buffer removed, we no longer have a unique address
which is guaranteed not to be a valid DMA target to use as an error
token. The DIRECT_MAPPING_ERROR value of 0 tries to at least represent
an unlikely DMA target, but unfortunately there are already SWIOTLB
users with DMA-able memory at physical address 0 which now gets falsely
treated as a mapping failure and leads to all manner of misbehaviour.
The best we can do to mitigate that is flip DIRECT_MAPPING_ERROR to the
other commonly-used error value of all-bits-set, since the last single
byte of memory is by far the least-likely-valid DMA target.
Fixes: dff8d6c1ed ("swiotlb: remove the overflow buffer")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This cpupower update for Linux 4.20-rc4 consists of compile fixes to allow
use of outside build flags and override of CFLAGS from Jiri Olsa, and fix
to compilation with STATIC=true from Konstantin Khlebnikov.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlv0cXUACgkQCwJExA0N
Qxwjxg/8C9QnM5XrjEqlNz4ESwZ17RWEEZaGcteaUG3yFYtHMYnqzjzDJxW8yjMj
XKI/v1IcMNxODoW61mKJ8QPCT4wOfL4Wi7uBHk48SzNCRXCNevFxOENXfDRCHYyH
0dKakVLRclR79n/TbH64WNRVUg4rkaZrpQGxNenDA2LJA4UW/ReUU2Dd8Qbyc6+p
1NA2wKONpLjoxSeyVjxu4Zz8mSucxLrTEzE7kElmqN0ZB6G5HE2yijCwBoTi9p95
mWqxRLDWKxnTZ5MDlS661RBw3tshTa2rtkv2QwijI23Pned5Z9imXDfZ8aadvntJ
8YJdScmhN53yJjRLf8idOchN24qI5RgHHyjvDjNJBrG85oFYuv2bDJSqjZUOX62V
oXhRp9bjcw9Frhe70/+yKN/EfXKEaKqXlpMiuBraPh8e+UQwxZU/iOHbGogQyo5Z
ot7fRJqiU8Cx7HplGwf3LO6sEXO7eOImBTVtYB3y4ctI5++ce/JACSDj7+RRE1/u
VW2x40uzE0lwVDNxJslhNKVPqu/kG6HhVXURxsWpqiw22OI/DQXrt17nbTcFPt1j
SDbxx2T+FgNPOjN69YwFzL7HjAqf6fdVwTQbfOiTA3ODA/i7nY9x/Y9FKqhctPj/
0afbO0s2plqQ0dgYhJdu6tDEqdHycvXSsW6zcBqw0mNIyw+QkOI=
=eU6f
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 4.20-rc4 from Shuah Khan:
"This cpupower update for Linux 4.20-rc4 consists of compile fixes to allow
use of outside build flags and override of CFLAGS from Jiri Olsa, and fix
to compilation with STATIC=true from Konstantin Khlebnikov."
* tag 'linux-cpupower-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
If we need to force a full plane update before userspace/fbdev
have given us a proper plane state we should try to maintain the
current plane state as much as possible (apart from the parts
of the state we're trying to fix up with the plane update).
To that end add basic readout for the plane rotation and
maintain it during the initial fb takeover.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-2-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit f43348a3db)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If we force a plane update to fix up our half populated plane state
we'll also force on the pipe gamma for the plane (since we always
enable pipe gamma currently). If the BIOS hasn't programmed a sensible
LUT into the hardware this will cause the image to become corrupted.
Typical symptoms are a purple/yellow/etc. flash when the driver loads.
To avoid this let's program something sensible into the LUT when
we do the plane update. In the future I plan to add proper plane
gamma enable readout so this is just a temporary measure.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120135450.3634-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit fa6af5145b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Many HP AMD based laptops contain an SMB0001 device like this:
Device (SMBD)
{
Name (_HID, "SMB0001") // _HID: Hardware ID
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
IO (Decode16,
0x0B20, // Range Minimum
0x0B20, // Range Maximum
0x20, // Alignment
0x20, // Length
)
IRQ (Level, ActiveLow, Shared, )
{7}
})
}
The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high
This causes issues when later on the AMD0030 GPIO device gets enumerated:
Device (GPIO)
{
Name (_HID, "AMDI0030") // _HID: Hardware ID
Name (_CID, "AMDI0030") // _CID: Compatible ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
{
0x00000007,
}
Memory32Fixed (ReadWrite,
0xFED81500, // Address Base
0x00000400, // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
}
}
Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.
The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:
amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22
The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.
The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Writeback connectors do not produce any on-screen output and require
special care for use. Such connectors are hidden from enumeration in
DRM resources by default, but they are still picked-up by fbdev.
This makes rather little sense since fbdev is not really adapted for
dealing with writeback.
Moreover, this is also a source of issues when userspace disables the
CRTC (and associated plane) without detaching the CRTC from the
connector (which is hidden by default). In this case, the connector is
still using the CRTC, leading to am "enabled/connectors mismatch" and
eventually the failure of the associated atomic commit. This situation
happens with VC4 testing under IGT GPU Tools.
Filter out writeback connectors in the fbdev helper to solve this.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Fixes: 935774cd71 ("drm: Add writeback connector type")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com
Under moderate amounts of GPU stress, we can observe on Bearlake and
Pineview (later gen3 models) that we execute the following batch buffer
before the write into the batch is coherent. Adding extra (tested with
upto 32x) MI_FLUSH to either the invalidation, flush or both phases does
not solve the incoherency issue with the relocations, but emitting the
MI_STORE_DWORD_IMM twice does. So be it.
Fixes: 7dd4f6729f ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181119154153.15327-1-chris@chris-wilson.co.uk
(cherry picked from commit 7fa28e1469)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
after 'police' configuration parameters were converted to use RCU instead
of spinlock, the state variables used to compute the traffic rate (namely
'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in
the traffic path without any protection.
Use a dedicated spinlock to avoid race conditions on these variables, and
ensure proper cache-line alignment. In this way, 'police' is still faster
than what we observed when 'tcf_lock' was used in the traffic path _ i.e.
reverting commit 2d550dbad8 ("net/sched: act_police: don't use spinlock
in the data path"). Moreover, we preserve the throughput improvement that
was obtained after 'police' started using per-cpu counters, when 'avrate'
is used instead of 'rate'.
Changes since v1 (thanks to Eric Dumazet):
- call ktime_get_ns() before acquiring the lock in the traffic path
- use a dedicated spinlock instead of tcf_lock
- improve cache-line usage
Fixes: 2d550dbad8 ("net/sched: act_police: don't use spinlock in the data path")
Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
- Re-enable the Cavium Octeon USB driver in its defconfig after it was
accidentally removed back in 4.14.
- Have early memblock allocations be performed bottom-up to more
closely match the behaviour we used to have with bootmem, which
seems a safer choice since we've seen fallout from the change made
in the 4.20 merge window.
- Simplify max_low_pfn calculation in the NUMA code for the Loongson3
& SGI IP27 platforms to both clean up the code & ensure max_low_pfn
has been set appropriately before it is used.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCW/R1TRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN19+gEAyjWhck3E/fJ38CEat3h8xg2zikjL
maRJMMbD0S055eIA/jWhyjpTEseNTLKycpRWAF+3LU0YU2llb/Ui0IJBCP4O
=r2Sa
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.20_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes for 4.20:
- Re-enable the Cavium Octeon USB driver in its defconfig after it
was accidentally removed back in 4.14.
- Have early memblock allocations be performed bottom-up to more
closely match the behaviour we used to have with bootmem, which
seems a safer choice since we've seen fallout from the change made
in the 4.20 merge window.
- Simplify max_low_pfn calculation in the NUMA code for the Loongson3
and SGI IP27 platforms to both clean up the code & ensure
max_low_pfn has been set appropriately before it is used"
* tag 'mips_fixes_4.20_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson3,SGI-IP27: Simplify max_low_pfn calculation
MIPS: Let early memblock_alloc*() allocate memories bottom-up
MIPS: OCTEON: cavium_octeon_defconfig: re-enable OCTEON USB driver
Meanwhile I know the driver quite well and I refactored bigger parts
of it. As a result people contact me already with r8169 questions.
Therefore I'd volunteer to become co-maintainer of the driver also
officially.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tal Gilboa
Tigran Mkrtchyan
Olga Kornievskaia
Linus Torvalds
Pan Bian
Benjamin Tissoires
Dave Airlie
Y.C. Chen
Vincent Chen
David S. Miller
Ursula Braun
Ursula Braun
Hans Wippel
Karsten Graul
Eric Dumazet
Petr Machata
Dave Chinner
Robin Murphy
Jens Axboe
Rafael J. Wysocki
Ville Syrjälä
Hans de Goede
Paul Kocialkowski
Chris Wilson
Davide Caratti
Heiner Kallweit