rq->gstate and rq->aborted_gstate both are zero before rqs are
allocated. If we have a small timeout, when the timer fires,
there could be rqs that are never allocated, and also there could
be rq that has been allocated but not initialized and started. At
the moment, the rq->gstate and rq->aborted_gstate both are 0, thus
the blk_mq_terminate_expired will identify the rq is timed out and
invoke .timeout early.
For scsi, this will cause scsi_times_out to be invoked before the
scsi_cmnd is not initialized, scsi_cmnd->device is still NULL at
the moment, then we will get crash.
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Martin Steigerwald <Martin@Lichtvoll.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When blk_queue_enter() waits for a queue to unfreeze, or unset the
PREEMPT_ONLY flag, do not allow it to be interrupted by a signal.
The PREEMPT_ONLY flag was introduced later in commit 3a0a529971
("block, scsi: Make SCSI quiesce and resume work reliably"). Note the SCSI
device is resumed asynchronously, i.e. after un-freezing userspace tasks.
So that commit exposed the bug as a regression in v4.15. A mysterious
SIGBUS (or -EIO) sometimes happened during the time the device was being
resumed. Most frequently, there was no kernel log message, and we saw Xorg
or Xwayland killed by SIGBUS.[1]
[1] E.g. https://bugzilla.redhat.com/show_bug.cgi?id=1553979
Without this fix, I get an IO error in this test:
# dd if=/dev/sda of=/dev/null iflag=direct & \
while killall -SIGUSR1 dd; do sleep 0.1; done & \
echo mem > /sys/power/state ; \
sleep 5; killall dd # stop after 5 seconds
The interruptible wait was added to blk_queue_enter in
commit 3ef28e83ab ("block: generic request_queue reference counting").
Before then, the interruptible wait was only in blk-mq, but I don't think
it could ever have been correct.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alan Jenkins <alan.christopher.jenkins@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because blkcg_exit_queue() is now called from inside blk_cleanup_queue()
it is no longer safe to access cgroup information during or after the
blk_cleanup_queue() call. Hence protect the generic_make_request_checks()
call with blk_queue_enter() / blk_queue_exit().
Reported-by: Ming Lei <ming.lei@redhat.com>
Fixes: a063057d7c ("block: Fix a race between request queue removal and the block cgroup controller")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RVhK
-----END PGP SIGNATURE-----
Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"It's a pretty quiet round this time, which is nice. This contains:
- series from Bart, cleaning up the way we set/test/clear atomic
queue flags.
- series from Bart, fixing races between gendisk and queue
registration and removal.
- set of bcache fixes and improvements from various folks, by way of
Michael Lyle.
- set of lightnvm updates from Matias, most of it being the 1.2 to
2.0 transition.
- removal of unused DIO flags from Nikolay.
- blk-mq/sbitmap memory ordering fixes from Omar.
- divide-by-zero fix for BFQ from Paolo.
- minor documentation patches from Randy.
- timeout fix from Tejun.
- Alpha "can't write a char atomically" fix from Mikulas.
- set of NVMe fixes by way of Keith.
- bsg and bsg-lib improvements from Christoph.
- a few sed-opal fixes from Jonas.
- cdrom check-disk-change deadlock fix from Maurizio.
- various little fixes, comment fixes, etc from various folks"
* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
blk-mq: Directly schedule q->timeout_work when aborting a request
blktrace: fix comment in blktrace_api.h
lightnvm: remove function name in strings
lightnvm: pblk: remove some unnecessary NULL checks
lightnvm: pblk: don't recover unwritten lines
lightnvm: pblk: implement 2.0 support
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: check for supported version
lightnvm: implement get log report chunk helpers
lightnvm: make address conversions depend on generic device
lightnvm: add support for 2.0 address format
lightnvm: normalize geometry nomenclature
lightnvm: complete geo structure with maxoc*
lightnvm: add shorten OCSSD version in geo
lightnvm: add minor version to generic geometry
lightnvm: simplify geometry structure
lightnvm: pblk: refactor init/exit sequences
lightnvm: Avoid validation of default op value
lightnvm: centralize permission check for lightnvm ioctl
...
scsi_device_quiesce() uses synchronize_rcu() to guarantee that the
effect of blk_set_preempt_only() will be visible for percpu_ref_tryget()
calls that occur after the queue unfreeze by using the approach
explained in https://lwn.net/Articles/573497/. The rcu read lock and
unlock calls in blk_queue_enter() form a pair with the synchronize_rcu()
call in scsi_device_quiesce(). Both scsi_device_quiesce() and
blk_queue_enter() must either use regular RCU or RCU-sched.
Since neither the RCU-protected code in blk_queue_enter() nor
blk_queue_usage_counter_release() sleeps, regular RCU protection
is sufficient. Note: scsi_device_quiesce() does not have to be
modified since it already uses synchronize_rcu().
Reported-by: Tejun Heo <tj@kernel.org>
Fixes: 3a0a529971 ("block, scsi: Make SCSI quiesce and resume work reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: stable@vger.kernel.org # v4.15
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_check_eod() should check partition size not the whole disk if
bio->bi_partno is non-zero. Do this by moving the call
to bio_check_eod() into blk_partition_remap().
Based on an earlier patch from Jiufei Xue.
Fixes: 74d46992e0 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce functions that modify the queue flags and that protect
these modifications with the request queue lock. Except for moving
one wake_up_all() call from inside to outside a critical section,
this patch does not change any functionality.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Except for changing the atomic queue flag manipulations that are
protected by the queue lock into non-atomic manipulations, this
patch does not change any functionality.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The vm counters is counted in sectors, so we should do the conversation
in submit_bio.
Fixes: 74d46992e0 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Cc: stable@vger.kernel.org
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid that the following race can occur:
blk_cleanup_queue() blkcg_print_blkgs()
spin_lock_irq(lock) (1) spin_lock_irq(blkg->q->queue_lock) (2,5)
q->queue_lock = &q->__queue_lock (3)
spin_unlock_irq(lock) (4)
spin_unlock_irq(blkg->q->queue_lock) (6)
(1) take driver lock;
(2) busy loop for driver lock;
(3) override driver lock with internal lock;
(4) unlock driver lock;
(5) can take driver lock now;
(6) but unlock internal lock.
This change is safe because only the SCSI core and the NVME core keep
a reference on a request queue after having called blk_cleanup_queue().
Neither driver accesses any of the removed data structures between its
blk_cleanup_queue() and blk_put_queue() calls.
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Initialize the request queue lock earlier such that the following
race can no longer occur:
blk_init_queue_node() blkcg_print_blkgs()
blk_alloc_queue_node (1)
q->queue_lock = &q->__queue_lock (2)
blkcg_init_queue(q) (3)
spin_lock_irq(blkg->q->queue_lock) (4)
q->queue_lock = lock (5)
spin_unlock_irq(blkg->q->queue_lock) (6)
(1) allocate an uninitialized queue;
(2) initialize queue_lock to its default internal lock;
(3) initialize blkcg part of request queue, which will create blkg and
then insert it to blkg_list;
(4) traverse blkg_list and find the created blkg, and then take its
queue lock, here it is the default *internal lock*;
(5) *race window*, now queue_lock is overridden with *driver specified
lock*;
(6) now unlock *driver specified lock*, not the locked *internal lock*,
unlock balance breaks.
The changes in this patch are as follows:
- Move the .queue_lock initialization from blk_init_queue_node() into
blk_alloc_queue_node().
- Only override the .queue_lock pointer for legacy queues because it
is not useful for blk-mq queues to override this pointer.
- For all all block drivers that initialize .queue_lock explicitly,
change the blk_alloc_queue() call in the driver into a
blk_alloc_queue_node() call and remove the explicit .queue_lock
initialization. Additionally, initialize the spin lock that will
be used as queue lock earlier if necessary.
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The classic error injection mechanism, should_fail_request() does not
support use cases where more information is required (from the entire
struct bio, for example).
To that end, this patch introduces should_fail_bio(), which calls
should_fail_request() under the hood but provides a convenient
place for kprobes to hook into if they require the entire struct bio.
This patch also replaces some existing calls to should_fail_request()
with should_fail_bio() with no degradation in performance.
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I ran into an issue on my laptop that triggered a bug on the
discard path:
WARNING: CPU: 2 PID: 207 at drivers/nvme/host/core.c:527 nvme_setup_cmd+0x3d3/0x430
Modules linked in: rfcomm fuse ctr ccm bnep arc4 binfmt_misc snd_hda_codec_hdmi nls_iso8859_1 nls_cp437 vfat snd_hda_codec_conexant fat snd_hda_codec_generic iwlmvm snd_hda_intel snd_hda_codec snd_hwdep mac80211 snd_hda_core snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq x86_pkg_temp_thermal intel_powerclamp kvm_intel uvcvideo iwlwifi btusb snd_seq_device videobuf2_vmalloc btintel videobuf2_memops kvm snd_timer videobuf2_v4l2 bluetooth irqbypass videobuf2_core aesni_intel aes_x86_64 crypto_simd cryptd snd glue_helper videodev cfg80211 ecdh_generic soundcore hid_generic usbhid hid i915 psmouse e1000e ptp pps_core xhci_pci xhci_hcd intel_gtt
CPU: 2 PID: 207 Comm: jbd2/nvme0n1p7- Tainted: G U 4.15.0+ #176
Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET59W (1.33 ) 12/19/2017
RIP: 0010:nvme_setup_cmd+0x3d3/0x430
RSP: 0018:ffff880423e9f838 EFLAGS: 00010217
RAX: 0000000000000000 RBX: ffff880423e9f8c8 RCX: 0000000000010000
RDX: ffff88022b200010 RSI: 0000000000000002 RDI: 00000000327f0000
RBP: ffff880421251400 R08: ffff88022b200000 R09: 0000000000000009
R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000ffff
R13: ffff88042341e280 R14: 000000000000ffff R15: ffff880421251440
FS: 0000000000000000(0000) GS:ffff880441500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b684795030 CR3: 0000000002e09006 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
nvme_queue_rq+0x40/0xa00
? __sbitmap_queue_get+0x24/0x90
? blk_mq_get_tag+0xa3/0x250
? wait_woken+0x80/0x80
? blk_mq_get_driver_tag+0x97/0xf0
blk_mq_dispatch_rq_list+0x7b/0x4a0
? deadline_remove_request+0x49/0xb0
blk_mq_do_dispatch_sched+0x4f/0xc0
blk_mq_sched_dispatch_requests+0x106/0x170
__blk_mq_run_hw_queue+0x53/0xa0
__blk_mq_delay_run_hw_queue+0x83/0xa0
blk_mq_run_hw_queue+0x6c/0xd0
blk_mq_sched_insert_request+0x96/0x140
__blk_mq_try_issue_directly+0x3d/0x190
blk_mq_try_issue_directly+0x30/0x70
blk_mq_make_request+0x1a4/0x6a0
generic_make_request+0xfd/0x2f0
? submit_bio+0x5c/0x110
submit_bio+0x5c/0x110
? __blkdev_issue_discard+0x152/0x200
submit_bio_wait+0x43/0x60
ext4_process_freed_data+0x1cd/0x440
? account_page_dirtied+0xe2/0x1a0
ext4_journal_commit_callback+0x4a/0xc0
jbd2_journal_commit_transaction+0x17e2/0x19e0
? kjournald2+0xb0/0x250
kjournald2+0xb0/0x250
? wait_woken+0x80/0x80
? commit_timeout+0x10/0x10
kthread+0x111/0x130
? kthread_create_worker_on_cpu+0x50/0x50
? do_group_exit+0x3a/0xa0
ret_from_fork+0x1f/0x30
Code: 73 89 c1 83 ce 10 c1 e1 10 09 ca 83 f8 04 0f 87 0f ff ff ff 8b 4d 20 48 8b 7d 00 c1 e9 09 48 01 8c c7 00 08 00 00 e9 f8 fe ff ff <0f> ff 4c 89 c7 41 bc 0a 00 00 00 e8 0d 78 d6 ff e9 a1 fc ff ff
---[ end trace 50d361cc444506c8 ]---
print_req_error: I/O error, dev nvme0n1, sector 847167488
Decoding the assembly, the request claims to have 0xffff segments,
while nvme counts two. This turns out to be because we don't check
for a data carrying request on the mq scheduler path, and since
blk_phys_contig_segment() returns true for a non-data request,
we decrement the initial segment count of 0 and end up with
0xffff in the unsigned short.
There are a few issues here:
1) We should initialize the segment count for a discard to 1.
2) The discard merging is currently using the data limits for
segments and sectors.
Fix this up by having attempt_merge() correctly identify the
request, and by initializing the segment count correctly
for discards.
This can only be triggered with mq-deadline on discard capable
devices right now, which isn't a common configuration.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This status is returned from driver to block layer if device related
resource is unavailable, but driver can guarantee that IO dispatch
will be triggered in future when the resource is available.
Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver
returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after
a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is
3 ms because both scsi-mq and nvmefc are using that magic value.
If a driver can make sure there is in-flight IO, it is safe to return
BLK_STS_DEV_RESOURCE because:
1) If all in-flight IOs complete before examining SCHED_RESTART in
blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue
is run immediately in this case by blk_mq_dispatch_rq_list();
2) if there is any in-flight IO after/when examining SCHED_RESTART
in blk_mq_dispatch_rq_list():
- if SCHED_RESTART isn't set, queue is run immediately as handled in 1)
- otherwise, this request will be dispatched after any in-flight IO is
completed via blk_mq_sched_restart()
3) if SCHED_RESTART is set concurently in context because of
BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two
cases and make sure IO hang can be avoided.
One invariant is that queue will be rerun if SCHED_RESTART is set.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block updates from Jens Axboe:
"This is the main pull request for block IO related changes for the
4.16 kernel. Nothing major in this pull request, but a good amount of
improvements and fixes all over the map. This contains:
- BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
Paolo.
- Support for SMR zones for deadline and mq-deadline from Damien and
Christoph.
- Set of fixes for bcache by way of Michael Lyle, including fixes
from himself, Kent, Rui, Tang, and Coly.
- Series from Matias for lightnvm with fixes from Hans Holmberg,
Javier, and Matias. Mostly centered around pblk, and the removing
rrpc 1.2 in preparation for supporting 2.0.
- A couple of NVMe pull requests from Christoph. Nothing major in
here, just fixes and cleanups, and support for command tracing from
Johannes.
- Support for blk-throttle for tracking reads and writes separately.
From Joseph Qi. A few cleanups/fixes also for blk-throttle from
Weiping.
- Series from Mike Snitzer that enables dm to register its queue more
logically, something that's alwways been problematic on dm since
it's a stacked device.
- Series from Ming cleaning up some of the bio accessor use, in
preparation for supporting multipage bvecs.
- Various fixes from Ming closing up holes around queue mapping and
quiescing.
- BSD partition fix from Richard Narron, fixing a problem where we
can't mount newer (10/11) FreeBSD partitions.
- Series from Tejun reworking blk-mq timeout handling. The previous
scheme relied on atomic bits, but it had races where we would think
a request had timed out if it to reused at the wrong time.
- null_blk now supports faking timeouts, to enable us to better
exercise and test that functionality separately. From me.
- Kill the separate atomic poll bit in the request struct. After
this, we don't use the atomic bits on blk-mq anymore at all. From
me.
- sgl_alloc/free helpers from Bart.
- Heavily contended tag case scalability improvement from me.
- Various little fixes and cleanups from Arnd, Bart, Corentin,
Douglas, Eryu, Goldwyn, and myself"
* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
block: remove smart1,2.h
nvme: add tracepoint for nvme_complete_rq
nvme: add tracepoint for nvme_setup_cmd
nvme-pci: introduce RECONNECTING state to mark initializing procedure
nvme-rdma: remove redundant boolean for inline_data
nvme: don't free uuid pointer before printing it
nvme-pci: Suspend queues after deleting them
bsg: use pr_debug instead of hand crafted macros
blk-mq-debugfs: don't allow write on attributes with seq_operations set
nvme-pci: Fix queue double allocations
block: Set BIO_TRACE_COMPLETION on new bio during split
blk-throttle: use queue_is_rq_based
block: Remove kblockd_schedule_delayed_work{,_on}()
blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
lib/scatterlist: Fix chaining support in sgl_alloc_order()
blk-throttle: track read and write request individually
block: add bdev_read_only() checks to common helpers
block: fail op_is_write() requests to read-only partitions
blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
...
The previous patch removed all users of these two functions. Hence
also remove the functions themselves.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most blk-mq functions have a name that follows the pattern blk_mq_${action}.
However, the function name blk_mq_request_direct_issue is an exception.
Hence rename this function. This patch does not change any functionality.
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Regular block device writes go through blkdev_write_iter(), which does
bdev_read_only(), while zeroout/discard/etc requests are never checked,
both userspace- and kernel-triggered. Add a generic catch-all check to
generic_make_request_checks() to actually enforce ioctl(BLKROSET) and
set_disk_ro(), which is used by quite a few drivers for things like
snapshots, read-only backing files/images, etc.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_insert_cloned_request() is called in the fast path of a dm-rq driver
(e.g. blk-mq request-based DM mpath). blk_insert_cloned_request() uses
blk_mq_request_bypass_insert() to directly append the request to the
blk-mq hctx->dispatch_list of the underlying queue.
1) This way isn't efficient enough because the hctx spinlock is always
used.
2) With blk_insert_cloned_request(), we completely bypass underlying
queue's elevator and depend on the upper-level dm-rq driver's elevator
to schedule IO. But dm-rq currently can't get the underlying queue's
dispatch feedback at all. Without knowing whether a request was issued
or not (e.g. due to underlying queue being busy) the dm-rq elevator will
not be able to provide effective IO merging (as a side-effect of dm-rq
currently blindly destaging a request from its elevator only to requeue
it after a delay, which kills any opportunity for merging). This
obviously causes very bad sequential IO performance.
Fix this by updating blk_insert_cloned_request() to use
blk_mq_request_direct_issue(). blk_mq_request_direct_issue() allows a
request to be issued directly to the underlying queue and returns the
dispatch feedback (blk_status_t). If blk_mq_request_direct_issue()
returns BLK_SYS_RESOURCE the dm-rq driver will now use DM_MAPIO_REQUEUE
to _not_ destage the request. Whereby preserving the opportunity to
merge IO.
With this, request-based DM's blk-mq sequential IO performance is vastly
improved (as much as 3X in mpath/virtio-scsi testing).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[blk-mq.c changes heavily influenced by Ming Lei's initial solution, but
they were refactored to make them less fragile and easier to read/review]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only have one atomic flag left. Instead of using an entire
unsigned long for that, steal the bottom bit of the deadline
field that we already reserved.
Remove ->atomic_flags, since it's now unused.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blk-mq timeout path synchronizes against the usual
issue/completion path using a complex scheme involving atomic
bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence
rules. Unfortunately, it contains quite a few holes.
There's a complex dancing around REQ_ATOM_STARTED and
REQ_ATOM_COMPLETE between issue/completion and timeout paths; however,
they don't have a synchronization point across request recycle
instances and it isn't clear what the barriers add.
blk_mq_check_expired() can easily read STARTED from N-2'th iteration,
deadline from N-1'th, blk_mark_rq_complete() against Nth instance.
In fact, it's pretty easy to make blk_mq_check_expired() terminate a
later instance of a request. If we induce 5 sec delay before
time_after_eq() test in blk_mq_check_expired(), shorten the timeout to
2s, and issue back-to-back large IOs, blk-mq starts timing out
requests spuriously pretty quickly. Nothing actually timed out. It
just made the call on a recycle instance of a request and then
terminated a later instance long after the original instance finished.
The scenario isn't theoretical either.
This patch replaces the broken synchronization mechanism with a RCU
and generation number based one.
1. Each request has a u64 generation + state value, which can be
updated only by the request owner. Whenever a request becomes
in-flight, the generation number gets bumped up too. This provides
the basis for the timeout path to distinguish different recycle
instances of the request.
Also, marking a request in-flight and setting its deadline are
protected with a seqcount so that the timeout path can fetch both
values coherently.
2. The timeout path fetches the generation, state and deadline. If
the verdict is timeout, it records the generation into a dedicated
request abortion field and does RCU wait.
3. The completion path is also protected by RCU (from the previous
patch) and checks whether the current generation number and state
match the abortion field. If so, it skips completion.
4. The timeout path, after RCU wait, scans requests again and
terminates the ones whose generation and state still match the ones
requested for abortion.
By now, the timeout path knows that either the generation number
and state changed if it lost the race or the completion will yield
to it and can safely timeout the request.
While it's more lines of code, it's conceptually simpler, doesn't
depend on direct use of subtle memory ordering or coherence, and
hopefully doesn't terminate the wrong instance.
While this change makes REQ_ATOM_COMPLETE synchronization unnecessary
between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't
removed yet as it's still used in other places. Future patches will
move all state tracking to the new mechanism and remove all bitops in
the hot paths.
Note that this patch adds a comment explaining a race condition in
BLK_EH_RESET_TIMER path. The race has always been there and this
patch doesn't change it. It's just documenting the existing race.
v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao.
- s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter.
- READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter.
v3: - Fixed possible extended seqcount / u64_stats_sync read looping
spotted by Peter.
- MQ_RQ_IDLE was incorrectly being set in complete_request instead
of free_request. Fixed.
v4: - Rebased on top of hctx_lock() refactoring patch.
- Added comment explaining the use of hctx_lock() in completion path.
v5: - Added comments requested by Bart.
- Note the addition of BLK_EH_RESET_TIMER race condition in the
commit message.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Components relying only on the request_queue structure for accessing
block devices (e.g. I/O schedulers) have a limited knowledged of the
device characteristics. In particular, the device capacity cannot be
easily discovered, which for a zoned block device also result in the
inability to easily know the number of zones of the device (the zone
size is indicated by the chunk_sectors field of the queue limits).
Introduce the nr_zones field to the request_queue structure to simplify
access to this information. Also, add the bitmap seq_zone_bitmap which
indicates which zones of the device are sequential zones (write
preferred or write required) and the bitmap seq_zones_wlock which
indicates if a zone is write locked, that is, if a write request
targeting a zone was dispatched to the device. These fields are
initialized by the low level block device driver (sd.c for ZBC/ZAC
disks). They are not initialized by stacking drivers (device mappers)
handling zoned block devices (e.g. dm-linear).
Using this, I/O schedulers can introduce zone write locking to control
request dispatching to a zoned block device and avoid write request
reordering by limiting to at most a single write request per zone
outside of the scheduler at any time.
Based on previous patches from Damien Le Moal.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Fixed comments and identation in blkdev.h
* Changed helper functions
* Fixed this commit message
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we track legacy requests with .q_usage_counter in commit 055f6e18e0
("block: Make q_usage_counter also track legacy requests"), but that
commit never runs and drains legacy queue before waiting for this counter
becoming zero, then IO hang is caused in the test of pulling disk during IO.
This patch fixes the issue by draining requests before waiting for
q_usage_counter becoming zero, both Mauricio and chenxiang reported this
issue, and observed that it can be fixed by this patch.
Link: https://marc.info/?l=linux-block&m=151192424731797&w=2
Fixes: 055f6e18e08f("block: Make q_usage_counter also track legacy requests")
Cc: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: "chenxiang (M)" <chenxiang66@hisilicon.com>
Tested-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call
blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But
if there are tasks blocked in get_request(), q->q_usage_counter can
never become zero. So we have to wake up all these tasks in
blk_set_queue_dying() first.
Fixes: 3ef28e83ab ("block: generic request_queue reference counting")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several block layer and NVMe core functions accept a combination
of BLK_MQ_REQ_* flags through the 'flags' argument but there is
no verification at compile time whether the right type of block
layer flags is passed. Make it possible for sparse to verify this.
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: linux-nvme@lists.infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The contexts from which a SCSI device can be quiesced or resumed are:
* Writing into /sys/class/scsi_device/*/device/state.
* SCSI parallel (SPI) domain validation.
* The SCSI device power management methods. See also scsi_bus_pm_ops.
It is essential during suspend and resume that neither the filesystem
state nor the filesystem metadata in RAM changes. This is why while
the hibernation image is being written or restored that SCSI devices
are quiesced. The SCSI core quiesces devices through scsi_device_quiesce()
and scsi_device_resume(). In the SDEV_QUIESCE state execution of
non-preempt requests is deferred. This is realized by returning
BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI
devices. Avoid that a full queue prevents power management requests
to be submitted by deferring allocation of non-preempt requests for
devices in the quiesced state. This patch has been tested by running
the following commands and by verifying that after each resume the
fio job was still running:
for ((i=0; i<10; i++)); do
(
cd /sys/block/md0/md &&
while true; do
[ "$(<sync_action)" = "idle" ] && echo check > sync_action
sleep 1
done
) &
pids=($!)
for d in /sys/class/block/sd*[a-z]; do
bdev=${d#/sys/class/block/}
hcil=$(readlink "$d/device")
hcil=${hcil#../../../}
echo 4 > "$d/queue/nr_requests"
echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth"
fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \
--rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \
--iodepth_batch=1 --thread --loops=$((2**31)) &
pids+=($!)
done
sleep 1
echo "$(date) Hibernating ..." >>hibernate-test-log.txt
systemctl hibernate
sleep 10
kill "${pids[@]}"
echo idle > /sys/block/md0/md/sync_action
wait
echo "$(date) Done." >>hibernate-test-log.txt
done
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348).
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This flag will be used in the next patch to let the block layer
core know whether or not a SCSI request queue has been quiesced.
A quiesced SCSI queue namely only processes RQF_PREEMPT requests.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set RQF_PREEMPT if BLK_MQ_REQ_PREEMPT is passed to
blk_get_request_flags().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A side effect of this patch is that the GFP mask that is passed to
several allocation functions in the legacy block layer is changed
from GFP_KERNEL into __GFP_DIRECT_RECLAIM.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch makes it possible to pause request allocation for
the legacy block layer by calling blk_mq_freeze_queue() and
blk_mq_unfreeze_queue().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
[ bvanassche: Combined two patches into one, edited a comment and made sure
REQ_NOWAIT is handled properly in blk_old_get_request() ]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid that removal of a request queue sporadically triggers the
following warning:
list_del corruption. next->prev should be ffff8807d649b970, but was 6b6b6b6b6b6b6b6b
WARNING: CPU: 3 PID: 342 at lib/list_debug.c:56 __list_del_entry_valid+0x92/0xa0
Call Trace:
process_one_work+0x11b/0x660
worker_thread+0x3d/0x3b0
kthread+0x129/0x140
ret_from_fork+0x27/0x40
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block flush need this function without running the queue, so add a
parameter controlling whether we run it or not.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to look for an active PM request until the next softbarrier
instead of looking for the first non-PM request. Otherwise any cause
of request reordering might starve the PM request(s).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
That we we can also poll non blk-mq queues. Mostly needed for
the NVMe multipath code, but could also be useful elsewhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This helpers allows to bounce steal the uncompleted bios from a request so
that they can be reissued on another path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This helper allows reinserting a bio into a new queue without much
overhead, but requires all queue limits to be the same for the upper
and lower queues, and it does not provide any recursion preventions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that if the timeout timer fires after a queue has been
marked "dying" that the affected requests are finished.
Reported-by: chenxiang (M) <chenxiang66@hisilicon.com>
Fixes: commit 287922eb0b ("block: defer timeouts to a workqueue")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: chenxiang (M) <chenxiang66@hisilicon.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Legacy queue sets request's request_list, mq doesn't. This makes mq does
the same thing, so we can find cgroup of a request. Note, we really
only use blkg field of request_list, it's pointless to allocate mempool
for request_list in mq case.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to have this helper inline in a header. Also drop the __ prefix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The lockdep code had reported the following unsafe locking scenario:
CPU0 CPU1
---- ----
lock(s_active#228);
lock(&bdev->bd_mutex/1);
lock(s_active#228);
lock(&bdev->bd_mutex);
*** DEADLOCK ***
The deadlock may happen when one task (CPU1) is trying to delete a
partition in a block device and another task (CPU0) is accessing
tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that
partition.
The s_active isn't an actual lock. It is a reference count (kn->count)
on the sysfs (kernfs) file. Removal of a sysfs file, however, require
a wait until all the references are gone. The reference count is
treated like a rwsem using lockdep instrumentation code.
The fact that a thread is in the sysfs callback method or in the
ioctl call means there is a reference to the opended sysfs or device
file. That should prevent the underlying block structure from being
removed.
Instead of using bd_mutex in the block_device structure, a new
blk_trace_mutex is now added to the request_queue structure to protect
access to the blk_trace structure.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix typo in patch subject line, and prune a comment detailing how
the code used to work.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A NULL pointer crash was reported for the case of having the BFQ IO
scheduler attached to the underlying blk-mq paths of a DM multipath
device. The crash occured in blk_mq_sched_insert_request()'s call to
e->type->ops.mq.insert_requests().
Paolo Valente correctly summarized why the crash occured with:
"the call chain (dm_mq_queue_rq -> map_request -> setup_clone ->
blk_rq_prep_clone) creates a cloned request without invoking
e->type->ops.mq.prepare_request for the target elevator e. The cloned
request is therefore not initialized for the scheduler, but it is
however inserted into the scheduler by blk_mq_sched_insert_request."
All said, a request-based DM multipath device's IO scheduler should be
the only one used -- when the original requests are issued to the
underlying paths as cloned requests they are inserted directly in the
underlying dispatch queue(s) rather than through an additional elevator.
But commit bd166ef18 ("blk-mq-sched: add framework for MQ capable IO
schedulers") switched blk_insert_cloned_request() from using
blk_mq_insert_request() to blk_mq_sched_insert_request(). Which
incorrectly added elevator machinery into a call chain that isn't
supposed to have any.
To fix this introduce a blk-mq private blk_mq_request_bypass_insert()
that blk_insert_cloned_request() calls to insert the request without
involving any elevator that may be attached to the cloned request's
request_queue.
Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Cc: stable@vger.kernel.org
Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only caller of this function is blk_start_request() in the same
file. Fix blk_start_request() description accordingly.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling blk_start_queue() from interrupt context with the queue
lock held and without disabling IRQs, as the skd driver does, is
safe. This patch avoids that loading the skd driver triggers the
following warning:
WARNING: CPU: 11 PID: 1348 at block/blk-core.c:283 blk_start_queue+0x84/0xa0
RIP: 0010:blk_start_queue+0x84/0xa0
Call Trace:
skd_unquiesce_dev+0x12a/0x1d0 [skd]
skd_complete_internal+0x1e7/0x5a0 [skd]
skd_complete_other+0xc2/0xd0 [skd]
skd_isr_completion_posted.isra.30+0x2a5/0x470 [skd]
skd_isr+0x14f/0x180 [skd]
irq_forced_thread_fn+0x2a/0x70
irq_thread+0x144/0x1a0
kthread+0x125/0x140
ret_from_fork+0x2a/0x40
Fixes: commit a038e25364 ("[PATCH] blk_start_queue() must be called with irq disabled - add warning")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Modify blk_mq_in_flight() to count both a partition and root at
the same time. Then we only have to call it once, instead of
potentially looping the tags twice.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning the count that matches the partition, pass
in an array of two ints. Index 0 will be filled with the inflight
count for the partition in question, and index 1 will filled
with the root inflight count, if the partition passed in is not the
root.
This is in preparation for being able to calculate both in one
go.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional change in this patch, just in preparation for
basing the inflight mechanism on the queue in question.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jianchao Wang
Alan Jenkins
Bart Van Assche
Linus Torvalds
Christoph Hellwig
Jiufei Xue
Howard McLauchlan
Jens Axboe
Ming Lei
Ilya Dryomov
Tejun Heo
Kees Cook
Shaohua Li
Waiman Long
Damien Le Moal