Граф коммитов

102 Коммитов

Автор SHA1 Сообщение Дата
Mike Snitzer 924e600d41 dm: eliminate some holes data structures
Eliminate a 4-byte hole in 'struct dm_io_memory' by moving 'offset' above the
'ptr' to which it applies (size reduced from 24 to 16 bytes).  And by
association, 1-4 byte hole is eliminated in 'struct dm_io_request' (size
reduced from 56 to 48 bytes).

Eliminate all 6 4-byte holes and 1 cache-line in 'struct dm_snapshot' (size
reduced from 392 to 368 bytes).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-03-06 02:32:33 +00:00
Nikanth Karthikesan 8215d6ec5f dm table: remove unused dm_get_device range parameters
Remove unused parameters(start and len) of dm_get_device()
and fix the callers.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2010-03-06 02:32:27 +00:00
Mikulas Patocka d2fdb776e0 dm snapshot: use merge origin if snapshot invalid
If the snapshot we are merging became invalid (e.g. it ran out of
space) redirect all I/O directly to the origin device.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:36 +00:00
Mike Snitzer d8ddb1cfff dm snapshot: report merge failure in status
Set 'merge_failed' flag if a snapshot fails to merge.  Update
snapshot_status() to report "Merge failed" if 'merge_failed' is set.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:35 +00:00
Mike Snitzer 8a2d528620 dm snapshot: merge consecutive chunks together
s->store->type->prepare_merge returns the number of chunks that can be
copied linearly working backwards from the returned chunk number.

For example, if it returns 3 chunks with old_chunk == 10 and new_chunk
== 20, then chunk 20 can be copied to 10, chunk 19 to 9 and 18 to 8.

Until now kcopyd only copied one chunk at a time.  This patch now copies
the full set at once.

Consequently, snapshot_merge_process() needs to delay the merging of all
chunks if any have writes in progress, not just the first chunk in the
region that is to be merged.

snapshot-merge's performance is now comparable to the original
snapshot-origin target.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:34 +00:00
Mikulas Patocka 73dfd078cf dm snapshot: trigger exceptions in remaining snapshots during merge
When there is one merging snapshot and other non-merging snapshots,
snapshot_merge_process() must make exceptions in the non-merging
snapshots.

Use a sequence count to resolve the race between I/O to chunks that are
about to be merged.  The count increases each time an exception
reallocation finishes.  Use wait_event() to wait until the count
changes.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:34 +00:00
Mikulas Patocka 17aa03326d dm snapshot: delay merging a chunk until writes to it complete
Track writes to chunks that are currently being merged and delay merging
a chunk until all writes to that chunk finish.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:33 +00:00
Mikulas Patocka 9fe8625488 dm snapshot: queue writes to chunks being merged
While a set of chunks is being merged, any overlapping writes need to be
queued.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:33 +00:00
Mikulas Patocka 1e03f97e43 dm snapshot: add merging
Merging is started when origin is resumed and it is stopped when
origin is suspended or when the merging snapshot is destroyed or
errors are detected.

Merging is not yet interlocked with writes: this will be handled in
subsequent patches.

The code relies on callbacks from a private kcopyd thread.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:32 +00:00
Mikulas Patocka 9d3b15c4c7 dm snapshot: permit only one merge at once
Merging more than one snapshot is not supported, so prevent
this happening.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:32 +00:00
Mike Snitzer 10b8106a70 dm snapshot: support barriers in snapshot merge target
Sets num_flush_requests=2 to support flushing both the origin and cow
devices used by the snapshot-merge target.

Also, snapshot_ctr() now gets the origin device using FMODE_WRITE if the
target is snapshot-merge (which writes to the origin device).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:31 +00:00
Mikulas Patocka 3452c2a1eb dm snapshot: avoid allocating exceptions in merge
The snapshot-merge target should not allocate new exceptions because the
intent is to merge all of its exceptions as quickly and safely as
possible.

This patch introduces the snapshot-merge mapping function and updates
__origin_write() so that it doesn't allocate exceptions on any snapshots
that are being merged.

If a write request to a merging snapshot device is to be dispatched
directly to the origin (because the chunk is not remapped or was already
merged), snapshot_merge_map() must make exceptions in other snapshots so
calls do_origin().

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:31 +00:00
Mikulas Patocka 515ad66cc4 dm snapshot: rework writing to origin
To track the completion of exceptions relating to the same location on
the device, the current code selects one exception as primary_pe, links
the other exceptions to it and uses reference counting to wait until all
the reallocations are complete.

It is considered too complicated to extend this code to handle the new
snapshot-merge target, where sets of non-overlapping chunks would also
need to become linked.

Instead, a simpler (but less efficient) approach is taken.  Bios are
linked to one exception.  When it completes, bios are simply retried,
and if other related exceptions are still outstanding, they'll get
queued again to wait for another one.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:30 +00:00
Mikulas Patocka d698aa4500 dm snapshot: add merge target
The snapshot-merge target allows a snapshot to be merged back into the
snapshot's origin device.

One anticipated use of snapshot merging is the rollback of filesystems
to back out problematic system upgrades.

This patch adds snapshot-merge target management to both
dm_snapshot_init() and dm_snapshot_exit().  As an initial place-holder,
snapshot-merge is identical to the snapshot target.  Documentation is
provided.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:30 +00:00
Mike Snitzer 615d1eb9ca dm snapshot: create function for chunk_is_tracked wait
Move the __chunk_is_tracked() loop into a separate function as we will
also need to call it from the write path in the rare case of conflicting
writes to the same chunk.

Originally introduced in commit a8d41b59f3
("dm snapshot: fix race during exception creation").

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:29 +00:00
Mikulas Patocka 9eaae8ffbc dm snapshot: make bio optional in __origin_write
To support the merging of snapshots back into their origin we need
to trigger exceptions in other snapshots not being merged without
any incoming bio on the origin device.  The bio parameter to
__origin_write() becomes optional and the sector needs supplying
separately.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:28 +00:00
Mike Snitzer c1f0c183f6 dm snapshot: allow live exception store handover between tables
Permit in-use snapshot exception data to be 'handed over' from one
snapshot instance to another.  This is a pre-requisite for patches
that allow the changes made in a snapshot device to be merged back into
its origin device and also allows device resizing.

The basic call sequence is:

  dmsetup load new_snapshot (referencing the existing in-use cow device)
     - the ctr code detects that the cow is already in use and allows the
       two snapshot target instances to be linked together
  dmsetup suspend original_snapshot
  dmsetup resume new_snapshot
     - the new_snapshot becomes live, and if anything now tries to access
       the original one it will receive -EIO
  dmsetup remove original_snapshot

(There can only be two snapshot targets referencing the same cow device
simultaneously.)

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:24 +00:00
Mike Snitzer c26655ca3c dm snapshot: track suspended state in target
Keep track of whether or not the device is suspended within the snapshot
target module, the same as we do in dm-raid1.

We will use this later to enforce the correct sequence of ioctls to
transfer the in-core exceptions from a snapshot target instance in
one table to a replacement one capable of merging them back
into the origin.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:12 +00:00
Mike Snitzer fc56f6fbcc dm snapshot: move cow ref from exception store to snap core
Store the reference to the snapshot cow device in the core snapshot
code instead of each exception store.  It can be accessed through the
new function dm_snap_cow().  Exception stores should each now maintain a
reference to their parent snapshot struct.

This is cleaner and makes part of the forthcoming snapshot merge code simpler.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
2009-12-10 23:52:12 +00:00
Mike Snitzer 985903bb3a dm snapshot: add allocated metadata to snapshot status
Add number of sectors used by metadata to the end of the snapshot's status
line.

Renamed dm_exception_store_type's 'fraction_full' to 'usage'.  Renamed
arguments to be clearer about what is being returned.  Also added
'metadata_sectors'.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:11 +00:00
Jon Brassow 3510cb94ff dm snapshot: rename exception functions
Rename exception functions.  Preparing to pull them out of
dm-snap.c for broader use.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:11 +00:00
Jon Brassow 191437a53c dm snapshot: rename exception_table to dm_exception_table
Rename exception_table for broader use outside dm-snap.c

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:10 +00:00
Jon Brassow 1d4989c858 dm snapshot: rename dm_snap_exception to dm_exception
The exception structure is not necessarily just a snapshot
element (especially after we pull it out of dm-snap.c).

Renaming appropriately.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:10 +00:00
Jon Brassow d32a6ea65f dm snapshot: consolidate insert exception functions
Consolidate the insert_*exception functions.  'insert_completed_exception'
already contains all the logic to handle 'insert_exception' (via
check for a hash_shift of 0), so remove redundant function.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:09 +00:00
Mikulas Patocka 7e201b3513 dm snapshot: abstract minimum_chunk_size fn
The origin needs to find minimum chunksize of all snapshots.  This logic is
moved to a separate function because it will be used at another place in
the snapshot merge patches.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:52:08 +00:00
Mikulas Patocka 8e87b9b81b dm snapshot: cope with chunk size larger than origin
Under some special conditions the snapshot hash_size is calculated as zero.
This patch instead sets a minimum value of 64, the same as for the
pending exception table.

rounddown_pow_of_two(0) is an undefined operation (it expands to shift
by -1).  init_exception_table with an argument of 0 would fail with -ENOMEM.

The way to trigger the problem is to create a snapshot with a chunk size
that is larger than the origin device.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:54 +00:00
Mikulas Patocka 94e76572b5 dm snapshot: only take lock for statustype info not table
Take snapshot lock only for STATUSTYPE_INFO, not STATUSTYPE_TABLE.

Commit 4c6fff445d
(dm-snapshot-lock-snapshot-while-supplying-status.patch)
introduced this use of the lock, but userspace applications using
libdevmapper have been found to request STATUSTYPE_TABLE while the device
is suspended and the lock is already held, leading to deadlock.  Since
the lock is not necessary in this case, don't try to take it.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-12-10 23:51:53 +00:00
Mikulas Patocka df96eee679 dm snapshot: use unsigned integer chunk size
Use unsigned integer chunk size.

Maximum chunk size is 512kB, there won't ever be need to use 4GB chunk size,
so the number can be 32-bit. This fixes compiler failure on 32-bit systems
with large block devices.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16 23:18:17 +01:00
Mikulas Patocka 4c6fff445d dm snapshot: lock snapshot while supplying status
This patch locks the snapshot when returning status.  It fixes a race
when it could return an invalid number of free chunks if someone
was simultaneously modifying it.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16 23:18:16 +01:00
Mikulas Patocka 3f2412dc85 dm snapshot: require non zero chunk size by end of ctr
If we are creating snapshot with memory-stored exception store, fail if
the user didn't specify chunk size. Zero chunk size would probably crash
a lot of places in the rest of snapshot code.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16 23:18:16 +01:00
Jonathan Brassow 034a186d29 dm snapshot: free exception store on init failure
While initializing the snapshot module, if we fail to register
the snapshot target then we must back-out the exception store
module initialization.

Cc: stable@kernel.org
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16 23:18:14 +01:00
Mikulas Patocka 6d45d93ead dm snapshot: sort by chunk size to fix race
Avoid a race causing corruption when snapshots of the same origin have
different chunk sizes by sorting the internal list of snapshots by chunk
size, largest first.
  https://bugzilla.redhat.com/show_bug.cgi?id=182659

For example, let's have two snapshots with different chunk sizes. The
first snapshot (1) has small chunk size and the second snapshot (2) has
large chunk size.  Let's have chunks A, B, C in these snapshots:
snapshot1: ====A====   ====B====
snapshot2: ==========C==========

(Chunk size is a power of 2. Chunks are aligned.)

A write to the origin at a position within A and C comes along. It
triggers reallocation of A, then reallocation of C and links them
together using A as the 'primary' exception.

Then another write to the origin comes along at a position within B and
C.  It creates pending exception for B.  C already has a reallocation in
progress and it already has a primary exception (A), so nothing is done
to it: B and C are not linked.

If the reallocation of B finishes before the reallocation of C, because
there is no link with the pending exception for C it does not know to
wait for it and, the second write is dispatched to the origin and causes
data corruption in the chunk C in snapshot2.

To avoid this situation, we maintain snapshots sorted in descending
order of chunk size.  This leads to a guaranteed ordering on the links
between the pending exceptions and avoids the problem explained above -
both A and B now get linked to C.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16 23:18:14 +01:00
Mike Snitzer 8811f46c1f dm snapshot: implement iterate devices
Implement the .iterate_devices for the origin and snapshot targets.
dm-snapshot's lack of .iterate_devices resulted in the inability to
properly establish queue_limits for both targets.

With 4K sector drives: an unfortunate side-effect of not establishing
proper limits in either targets' DM device was that IO to the devices
would fail even though both had been created without error.

Commit af4874e03e ("dm target:s introduce
iterate devices fn") in 2.6.31-rc1 should have implemented .iterate_devices
for dm-snap.c's origin and snapshot targets.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04 20:40:19 +01:00
Mikulas Patocka 494b3ee7d4 dm snapshot: support barriers
Flush support for dm-snapshot target.

This patch just forwards the flush request to either the origin or the snapshot
device.  (It doesn't flush exception store metadata.)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 10:12:25 +01:00
Christoph Hellwig 8f3d8ba20e block: move bio list helpers into bio.h
It's used by DM and MD and generally useful, so move the bio list
helpers into bio.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 08:28:09 +02:00
Jonathan Brassow 1e302a929e dm snapshot: move status to exception store
Let the exception store types print out their status through
the new API, rather than having the snapshot code do it.

Adjust the buffer position to allow for the preceding DMEMIT in the
arguments to type->status().

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:35 +01:00
Jonathan Brassow fee1998e9c dm snapshot: move ctr parsing to exception store
First step of having the exception stores parse their own arguments -
generalizing the interface.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:34 +01:00
Jonathan Brassow 2e4a31df2b dm snapshot: use DMEMIT macro for status
Use DMEMIT in place of snprintf.  This makes it easier later when
other modules are helping to populate our status output.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:34 +01:00
Jonathan Brassow ccc45ea8ae dm snapshot: remove dm_snap header
Move some of the last bits from dm-snap.h into dm-snap.c where they
belong and remove dm-snap.h.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:34 +01:00
Jonathan Brassow 71fab00a6b dm snapshot: remove dm_snap header use
Move useful functions out of dm-snap.h and stop using dm-snap.h.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:33 +01:00
Jonathan Brassow 49beb2b87a dm exception store: move cow pointer
Move COW device from snapshot to exception store.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:33 +01:00
Jonathan Brassow d021684951 dm exception store: move chunk_fields
Move chunk fields from snapshot to exception store.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:32 +01:00
Jonathan Brassow 0cea9c7827 dm exception store: move dm_target pointer
Move target pointer from snapshot to exception store.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:32 +01:00
Jonathan Brassow 493df71c64 dm exception store: introduce registry
Move exception stores into a registry.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:31 +01:00
Jonathan Brassow b2a1146529 dm exception store: separate type from instance
Introduce struct dm_exception_store_type.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:30 +01:00
Mikulas Patocka 35bf659b00 dm snapshot: avoid having two exceptions for the same chunk
We need to check if the exception was completed after dropping the lock.

After regaining the lock, __find_pending_exception checks if the exception
was already placed into &s->pending hash.

But we don't check if the exception was already completed and placed into
&s->complete hash. If the process waiting in alloc_pending_exception was
delayed at this point because of a scheduling latency and the exception
was meanwhile completed, we'd miss that and allocate another pending
exception for already completed chunk.

It would lead to a situation where two records for the same chunk exist
and potential data corruption because multiple snapshot I/Os to the
affected chunk could be redirected to different locations in the
snapshot.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:26 +01:00
Mikulas Patocka c66213921c dm snapshot: avoid dropping lock in __find_pending_exception
It is uncommon and bug-prone to drop a lock in a function that is called with
the lock held, so this is moved to the caller.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:25 +01:00
Mikulas Patocka 2913808eb5 dm snapshot: refactor __find_pending_exception
Move looking-up of a pending exception from __find_pending_exception to another
function.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 19:55:25 +01:00
Jonathan Brassow a159c1ac5f dm snapshot: extend exception store functions
Supply dm_add_exception as a callback to the read_metadata function.
Add a status function ready for a later patch and name the functions
consistently.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:19 +00:00
Alasdair G Kergon 4db6bfe02b dm snapshot: split out exception store implementations
Move the existing snapshot exception store implementations out into
separate files.  Later patches will place these behind a new
interface in preparation for alternative implementations.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-01-06 03:05:17 +00:00