Граф коммитов

287 Коммитов

Автор SHA1 Сообщение Дата
Al Viro 78bd8fbbcd fix sctp_del_bind_addr() last argument type
It gets pointer to fastcall function, expects a pointer to normal
one and calls the sucker.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-26 09:22:04 -07:00
Wei Yongjun 6f4c618ddb SCTP : Add paramters validity check for ASCONF chunk
If ADDIP is enabled, when an ASCONF chunk is received with ASCONF
paramter length set to zero, this will cause infinite loop.
By the way, if an malformed ASCONF chunk is received, will cause
processing to access memory without verifying.

This is because of not check the validity of parameters in ASCONF chunk.
This patch fixed this.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-09-25 22:55:49 -07:00
Vlad Yasevich 3c77f961b5 SCTP: Discard OOTB packetes with bundled INIT early.
RFC 4460 and future RFC 4960 (2960-bis) specify that packets
with bundled INIT chunks need to be dropped.  We currenlty do
that only after processing any leading chunks.  For OOTB chunks,
since we already walk the entire packet, we should discard packets
with bundled INITs.

There are other chunks chunks that MUST NOT be bundled, but the spec
is silent on theire treatment.  Thus, we'll leave their teatment
alone for the moment.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Wei Yongjun <yjwei@cn.fujitsu.com>
2007-09-25 22:55:48 -07:00
Vlad Yasevich ece25dfa09 SCTP: Clean up OOTB handling and fix infinite loop processing
While processing OOTB chunks as well as chunks with an invalid
length of 0, it was possible to SCTP to get wedged inside an
infinite loop because we didn't catch the condition correctly,
or didn't mark the packet for discard correctly.
This work is based on original findings and work by
Wei Yongjun <yjwei@cn.fujitsu.com>

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-09-25 22:55:47 -07:00
Vlad Yasevich d3f259687f SCTP: Explicitely discard OOTB chunks
Explicitely discard OOTB chunks, whether the result is a
SHUTDOWN COMPLETE or an ABORT.  We need to discard the OOTB
SHUTDOWN ACK to prevent bombing attackes since responsed
MUST NOT be bundled.  We also explicietely discard in the
ABORT case since that function is widely used internally.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2007-09-25 22:55:47 -07:00
Wei Yongjun 02c4e12c64 SCTP: Send ABORT chunk with correct tag in response to INIT ACK
When SCTP client received an INIT ACK chunk with missing mandatory
parameter such as "cookie parameter", it will send back a ABORT
with T-bit not set and verification tag is set to 0.
This is because before we accept this INIT ACK chunk, we do not know
the peer's tag.  This patch change to reflect vtag when responding to
INIT ACK with missing mandatory parameter.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-09-25 22:55:46 -07:00
Vlad Yasevich a09c83847b SCTP: Validate buffer room when processing sequential chunks
When we process bundled chunks, we need to make sure that
the skb has the buffer for each header since we assume it's
always there.  Some malicious node can send us something like
DATA + 2 bytes and we'll try to walk off the end refrencing
potentially uninitialized memory.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-09-25 22:55:45 -07:00
Vlad Yasevich 559cf710b0 [SCTP]: Convert bind_addr_list locking to RCU
Since the sctp_sockaddr_entry is now RCU enabled as part of
the patch to synchronize sctp_localaddr_list, it makes sense to
change all handling of these entries to RCU.  This includes the
sctp_bind_addrs structure and it's list of bound addresses.

This list is currently protected by an external rw_lock and that
looks like an overkill.  There are only 2 writers to the list:
bind()/bindx() calls, and BH processing of ASCONF-ACK chunks.
These are already seriealized via the socket lock, so they will
not step on each other.  These are also relatively rare, so we
should be good with RCU.

The readers are varied and they are easily converted to RCU.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Sridhar Samdurala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:03:28 -07:00
Vlad Yasevich 2930354799 [SCTP]: Add RCU synchronization around sctp_localaddr_list
sctp_localaddr_list is modified dynamically via NETDEV_UP
and NETDEV_DOWN events, but there is not synchronization
between writer (even handler) and readers.  As a result,
the readers can access an entry that has been freed and
crash the sytem.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Sridhar Samdurala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-16 16:02:12 -07:00
Wei Yongjun cb243a1a9f SCTP: Fix to handle invalid parameter length correctly
If an INIT with invalid parameter length look like this:
Parameter Type : 1
Parameter Length: 800
and not contain any payload, SCTP will ignore this  parameter and send
back a INIT-ACK.
This patch is fix to handle this invalid parameter length correctly.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 16:44:27 -04:00
Vlad Yasevich 609ee4679b SCTP: Abort on COOKIE-ECHO if backlog is exceeded.
Currently we abort on the INIT chunk we our backlog is currenlty
exceeded.  Delay this about untill COOKIE-ECHO to give the user
time to accept the socket.  Also, make sure that we treat
sk_max_backlog of 0 as no connections allowed.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 14:12:25 -04:00
Vlad Yasevich 498d63071e SCTP: Correctly disable listening when backlog is 0.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 14:03:58 -04:00
Vlad Yasevich d0ce92910b SCTP: Do not retransmit chunks that are newer then rtt.
When performing a retransmit, do not include the chunk if
it was sent less then 1 rtt ago.  The reason is that we
may receive the SACK very soon and wouldn't retransmit.
Suggested by Randy Stewart.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 13:56:06 -04:00
Vlad Yasevich cc75689a4c SCTP: Uncomfirmed transports can't become Inactive
Do not set Unconfirmed transports to Inactive state.  This may
result in an inactive association being destroyed since we start
counting errors on "inactive" transports against the association.
This was found at the SCTP interop event.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 13:55:41 -04:00
Vlad Yasevich 2772b495ef SCTP: Pick the correct port when binding to 0.
sctp_bindx() allows the use of unspecified port.  The problem is
that every address we bind to ends up selecting a new port if
the user specified port 0.  This patch allows re-use of the
already selected port when the port from bindx was 0.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 13:55:20 -04:00
Wei Yongjun d99fa42963 SCTP: Use net_ratelimit to suppress error messages print too fast
When multi bundling SHUTDOWN-ACK message is received in ESTAB state,
this will cause "sctp protocol violation state" message print many times.
If SHUTDOWN-ACK is bundled 300 times in one packet, message will be
print 300 times. The same problem also exists when received unexpected
HEARTBEAT-ACK message which is bundled message times.

This patch used net_ratelimit() to suppress error messages print too fast.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 13:52:56 -04:00
Wei Yongjun 00f1c2df2a SCTP: Fix to encode PROTOCOL VIOLATION error cause correctly
PROTOCOL VIOLATION error cause in ABORT is bad encode when make abort
chunk. When SCTP encode ABORT chunk with PROTOCOL VIOLATION error cause,
it just add the error messages to PROTOCOL VIOLATION error cause, the
rest four bytes(struct sctp_paramhdr) is just add to the chunk, not
change the length of error cause. This cause the ABORT chunk to be a bad
format. The chunk is like this:

ABORT chunk
  Chunk type: ABORT (6)
  Chunk flags: 0x00
  Chunk length: 72 (*1)
  Protocol violation cause
    Cause code: Protocol violation (0x000d)
    Cause length: 62 (*2)
    Cause information: 5468652063756D756C61746976652074736E2061636B2062...
    Cause padding: 0000
[Needless] 00030010
Chunk Length(*1) = 72 but Cause length(*2) only 62, not include the
extend 4 bytes.
((72 - sizeof(chunk_hdr)) = 68) != (62 +3) / 4 * 4

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 13:50:48 -04:00
Wei Yongjun 8d614ade51 SCTP: Fix sctp_addto_chunk() to add pad with correct length
At function sctp_addto_chunk(), it do pad before add payload to chunk if
chunk length is not 4-byte alignment. But it do pad with a bad length.
This patch fixed this probleam.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-30 11:56:17 -04:00
Vlad Yasevich ab3e5e7b65 SCTP: Assign stream sequence numbers to the entire message
Currently we only assign the sequence number to a packet that
we are about to transmit.  This however breaks the Partial
Reliability extensions, because it's possible for us to
never transmit a packet, i.e. it expires before we get to send
it.  In such cases, if the message contained multiple SCTP
fragments, and we did manage to send the first part of the
message, the Stream sequence numbers would get into invalid
state and cause receiver to stall.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-29 13:34:34 -04:00
Vlad Yasevich ea2dfb3733 SCTP: properly clean up fragment and ordering queues during FWD-TSN.
When we recieve a FWD-TSN (meaning the peer has abandoned the data),
we need to clean up any partially received messages that may be
hanging out on the re-assembly or re-ordering queues.  This is
a MUST requirement that was not properly done before.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com.>
2007-08-29 13:34:33 -04:00
Wei Yongjun 5f8f1c3c87 SCTP: remove useless code in function sctp_init_cause
Some code in function sctp_init_cause() seem useless, this patch remove
them.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-02 10:56:07 -04:00
Wei Yongjun aecedeab6f SCTP: drop SACK if ctsn is not less than the next tsn of assoc
We need to drop the SACK if the peer is attempting to acknowledge
unset data, i.e.  the CTSN in the SACK is greater or equal to the
next TSN we will send.

Example:
Endpoint A                                      Endpoint B
                             <---------------   DATA (TSN=1)
SACK(TSN=1) ---------------> 
                             <---------------   DATA (TSN=2)
                             <---------------   DATA (TSN=3)
                             <---------------   DATA (TSN=4)
                             <---------------   DATA (TSN=5)
SACK(TSN=1000) --------------->
                             <---------------   DATA (TSN=6)
                             <---------------   DATA (TSN=7)

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-02 10:41:18 -04:00
Vlad Yasevich e4d1feab5d SCTP: IPv4 mapped addr not returned in SCTPv6 accept()
When issuing a connect call on an AF_INET6 sctp socket with
a IPv4-mapped destination, the peer address that is returned
by getpeeraddr() should be v4-mapped as well.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01 11:19:06 -04:00
Dave Johnson b225b884a1 SCTP: IPv4 mapped addr not returned in SCTPv6 accept()
An accept() call on a SCTPv6 socket that returns due to connection of
a IPv4 mapped peer will fill out the 'struct sockaddr' with a zero
IPv6 address instead of the IPv4 mapped address of the peer.

This is due to the v4mapped flag not getting copied into the new
socket on accept() as well as a missing check for INET6 socket type in
sctp_v4_to_sk_*addr().

Signed-off-by: Dave Johnson <djohnson@sw.starentnetworks.com>
Cc: Srinivas Akkipeddi <sakkiped@starentnetworks.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01 11:19:06 -04:00
Sebastian Siewior cc121fa87a sctp: fix shadow symbol in net/sctp/tsnmap.c
net/sctp/tsnmap.c:164:16: warning: symbol '_end' shadows an earlier one
include/asm-generic/sections.h:13:13: originally declared here

Renamed renamed _end to end_ and _start (for consistence).

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01 11:19:06 -04:00
Sebastian Siewior d6f9fdaf64 sctp: try to fix readlock
unlock the reader lock in error case.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01 11:19:06 -04:00
sebastian@breakpoint.cc c86dabcf00 sctp: remove shadowed symbols
Fixes the following sparse warnings:
net/sctp/sm_make_chunk.c:1457:9: warning: symbol 'len' shadows an earlier one
net/sctp/sm_make_chunk.c:1356:23: originally declared here
net/sctp/socket.c:1534:22: warning: symbol 'chunk' shadows an earlier one
net/sctp/socket.c:1387:20: originally declared here

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01 11:19:06 -04:00
sebastian@breakpoint.cc 0a5fcb9cf8 sctp: move global declaration to header file.
sctp_chunk_cachep & sctp_bucket_cachep is used module global, so move it
to a header file.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01 11:19:06 -04:00
sebastian@breakpoint.cc 046752104c sctp: make locally used function static
Forward declarion is static, the function itself is not. Make it
consistent.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-08-01 11:19:05 -04:00
Paul Mundt 20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
YOSHIFUJI Hideaki 9cbcbf4e01 [NET] SCTP: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2007-07-19 10:44:50 +09:00
Philippe De Muyter 56b3d975bb [NET]: Make all initialized struct seq_operations const.
Make all initialized struct seq_operations in net/ const

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 23:07:31 -07:00
Vlad Yasevich 1669d857a2 SCTP: Add scope_id validation for link-local binds
SCTP currently permits users to bind to link-local addresses,
but doesn't verify that the scope id specified at bind matches
the interface that the address is configured on.  It was report
that this can hang a system.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-05 17:40:15 -07:00
Vlad Yasevich f50f95cab7 SCTP: Check to make sure file is valid before setting timeout
In-kernel sockets created with sock_create_kern don't usually
have a file and file descriptor allocated to them.  As a result,
when SCTP tries to check the non-blocking flag, we Oops when
dereferencing a NULL file pointer.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-05 17:40:11 -07:00
Vlad Yasevich 3663c30660 SCTP: Fix thinko in sctp_copy_laddrs()
Correctly dereference bytes_copied in sctp_copy_laddrs().
I totally must have spaced when doing this.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-05 17:40:08 -07:00
Zach Brown 5131a184a3 SCTP: lock_sock_nested in sctp_sock_migrate
sctp_sock_migrate() grabs the socket lock on a newly allocated socket while
holding the socket lock on an old socket.  lockdep worries that this might
be a recursive lock attempt.

 task/3026 is trying to acquire lock:
  (sk_lock-AF_INET){--..}, at: [<ffffffff88105b8c>] sctp_sock_migrate+0x2e3/0x327 [sctp]
 but task is already holding lock:
  (sk_lock-AF_INET){--..}, at: [<ffffffff8810891f>] sctp_accept+0xdf/0x1e3 [sctp]

This patch tells lockdep that this locking is safe by using
lock_sock_nested().

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-26 09:29:09 -04:00
Neil Horman 186e234358 SCTP: Fix sctp_getsockopt_get_peer_addrs
This is the split out of the patch that we agreed I should split
out from my last patch.  It changes space_left to be computed in the same
way the to variable is.  I know we talked about changing space_left to an
int, but I think size_t is more appropriate, since we should never have
negative space in our buffer, and computing using offsetof means space_left
should now never drop below zero.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-19 09:47:32 -04:00
Neil Horman 408f22e81e SCTP: update sctp_getsockopt helpers to allow oversized buffers
I noted the other day while looking at a bug that was ostensibly
in some perl networking library, that we strictly avoid allowing getsockopt
operations to complete if we pass in oversized buffers.  This seems to make
libraries like Perl::NET malfunction since it seems to allocate oversized
buffers for use in several operations.  It also seems to be out of line with
the way udp, tcp and ip getsockopt routines handle buffer input (since the
*optlen pointer in both an input and an output and gets set to the length
of the data that we copy into the buffer).  This patch brings our getsockopt
helpers into line with other protocols, and allows us to accept oversized
buffers for our getsockopt operations.  Tested by me with good results.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-19 09:46:34 -04:00
Vlad Yasevich 06ad391919 [SCTP] Don't disable PMTU discovery when mtu is small
Right now, when we receive a mtu estimate smaller then minim
threshold in the ICMP message, we disable the path mtu discovery
on the transport.  This leads to the never increasing sctp fragmentation
point even when the real path mtu has increased.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2007-06-13 20:44:42 +00:00
Vlad Yasevich 8a4794914f [SCTP] Flag a pmtu change request
Currently, if the socket is owned by the user, we drop the ICMP
message.  As a result SCTP forgets that path MTU changed and
never adjusting it's estimate.  This causes all subsequent
packets to be fragmented.  With this patch, we'll flag the association
that it needs to udpate it's estimate based on the already updated
routing information.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13 20:44:42 +00:00
Vlad Yasevich c910b47e18 [SCTP] Update pmtu handling to be similar to tcp
Introduce new function sctp_transport_update_pmtu that updates
the transports and destination caches view of the path mtu.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13 20:44:42 +00:00
Vlad Yasevich fe979ac169 [SCTP] Fix leak in sctp_getsockopt_local_addrs when copy_to_user fails
If the copy_to_user or copy_user calls fail in sctp_getsockopt_local_addrs(),
the function should free locally allocated storage before returning error.
Spotted by Coverity.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13 20:44:41 +00:00
Vlad Yasevich 8b35805693 [SCTP]: Allow unspecified port in sctp_bindx()
Allow sctp_bindx() to accept multiple address with
unspecified port.  In this case, all addresses inherit
the first bound port.  We still catch full mis-matches.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13 20:44:41 +00:00
Vlad Yasevich d570ee490f [SCTP]: Correctly set daddr for IPv6 sockets during peeloff
During peeloff of AF_INET6 socket, the inet6_sk(sk)->daddr
wasn't set correctly since the code was assuming IPv4 only.
Now we use a correct call to set the destination address.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: Sridhar Samudrala <sri@us.ibm.com>
2007-06-13 20:44:41 +00:00
Bill Nottingham 75202e7689 [NET]: Fix comparisons of unsigned < 0.
Recent gcc versions emit warnings when unsigned variables are
compared < 0 or >= 0.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03 18:08:47 -07:00
Jan Engelhardt 29e32ccdec [SCTP]: Use menuconfig objects.
Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-24 16:36:48 -07:00
Vlad Yasevich ac40e41f4d [SCTP]: Do not include ABORT chunk header in the notification.
The socket API draft is unclear about whether to include the
chunk header or not.  Recent discussion on the sctp implementors
mailing list clarified that the chunk header shouldn't be included,
but the error parameter header still needs to be there.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:31 -07:00
Vlad Yasevich 70b57b814e [SCTP]: Correctly copy addresses in sctp_copy_laddrs
I broke the  non-wildcard case recently.  This is to fixes it.
Now, explictitly bound addresses can ge retrieved using the API.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:30 -07:00
Vlad Yasevich 8dc4984a6b [SCTP]: Prevent OOPS if hmac modules didn't load
SCTP was checking for NULL when trying to detect hmac
allocation failure where it should have been using IS_ERR.
Also, print a rate limited warning to the log telling the
user what happend.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 23:45:29 -07:00
Michael Opdenacker 59c51591a0 Fix occurrences of "the the "
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:57:56 +02:00