Граф коммитов

439 Коммитов

Автор SHA1 Сообщение Дата
Dean Nelson e54af724c1 [IA64-SGI] fixes for XPC disengage and open/close protocol
This patch addresses a few issues with the open/close protocol that
were revealed by the newly added disengage functionality combined
with more extensive testing.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-25 16:27:37 -07:00
hawkes@sgi.com ddf6d0a00c [IA64] another place to use for_each_cpu_mask() in arch/ia64
In arch/ia64 change the explicit use of a for-loop using NR_CPUS into the
general for_each_online_cpu() construct.  This widens the scope of potential
future optimizations of the general constructs, as well as takes advantage
of the existing optimizations of first_cpu() and next_cpu(), which is
advantageous when the true CPU count is much smaller than NR_CPUS.

Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-25 15:12:05 -07:00
hawkes@sgi.com dc565b525d [IA64] wider use of for_each_cpu_mask() in arch/ia64
In arch/ia64 change the explicit use of for-loops and NR_CPUS into the
general for_each_cpu() or for_each_online_cpu() constructs, as
appropriate.  This widens the scope of potential future optimizations
of the general constructs, as well as takes advantage of the existing
optimizations of first_cpu() and next_cpu().

Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-25 15:10:08 -07:00
H. J. Lu 9c184a073b [IA64] Fix 2.6 kernel for the new ia64 assembler
The new ia64 assembler uses slot 1 for the offset of a long (2-slot)
instruction and the old assembler uses slot 2. The 2.6 kernel assumes
slot 2 and won't boot when the new assembler is used:

http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433

This patch will work with either slot 1 or 2.

Patch provided by H.J. Lu

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-25 15:05:45 -07:00
Siddha, Suresh B ce6e71ad48 [IA64] fix siblings field value in /proc/cpuinfo
Fix the "siblings" field value in /proc/cpuinfo so that it now shows the
number of siblings as seen by OS, instead of what is available from
hardware perspective.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-25 15:00:36 -07:00
Peter Chubb b6a7e1ecef [IA64] Allow simulator to use bigger disks
The simscsi code at present overflows an int if it's given a large
disk image.  The attached patch increases the possible size to 128G.
While it's unlikely that anyone will want to use SKI with such a
large drive, the same framework is currently being used for various
virtualisation experiments.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-25 14:36:55 -07:00
Tony Luck 9cec58dc13 Update from upstream with manual merge of Yasunori Goto's
changes to swiotlb.c made in commit 281dd25cdc
since this file has been moved from arch/ia64/lib/swiotlb.c to
lib/swiotlb.c

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-20 10:41:44 -07:00
Yasunori Goto 281dd25cdc [PATCH] swiotlb: make sure initial DMA allocations really are in DMA memory
This introduces a limit parameter to the core bootmem allocator; The new
parameter indicates that physical memory allocated by the bootmem
allocator should be within the requested limit.

We also introduce alloc_bootmem_low_pages_limit, alloc_bootmem_node_limit,
alloc_bootmem_low_pages_node_limit apis, but alloc_bootmem_low_pages_limit
is the only api used for swiotlb.

The existing alloc_bootmem_low_pages() api could instead have been
changed and made to pass right limit to the core allocator.  But that
would make the patch more intrusive for 2.6.14, as other arches use
alloc_bootmem_low_pages().  We may be done that post 2.6.14 as a
cleanup.

With this, swiotlb gets memory within 4G for both x86_64 and ia64
arches.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:11:33 -07:00
Bryan Sutula 76e677e25d [IA64] Avoid kernel hang during CMC interrupt storm
I've noticed a kernel hang during a storm of CMC interrupts, which was
tracked down to the continual execution of the interrupt handler.

There's code in the CMC handler that's supposed to disable CMC
interrupts and switch to polling mode when it sees a bunch of CMCs.
Because disabling CMCs across all CPUs isn't safe in interrupt context,
the disable is done with a schedule_work().  But with continual CMC
interrupts, the schedule_work() never gets executed.

The following patch immediately disables CMC interrupts for the current
CPU.  This then allows (at least) one CPU to ignore CMC interrupts,
execute the schedule_work() code, and disable CMC interrupts on the rest
of the CPUs.

Acked-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Bryan Sutula <Bryan.Sutula@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-06 15:04:11 -07:00
Bob Picco 1e5c936e3c [PATCH] V5 ia64 SPARSEMEM - gensparse_defconfig
gensparse_defconfig is a config generated file for SPARSEMEM and GENERIC
kernel configuration (defconfig).

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-04 13:22:07 -07:00
Bob Picco 2d4b1fa234 [PATCH] V5 ia64 SPARSEMEM - SPARSEMEM code changes
This patch is the minimal set of changes required by ia64 to use SPARSEMEM.

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-04 13:21:38 -07:00
Bob Picco c678796cab [PATCH] V5 ia64 SPARSEMEM - eliminate contig_page_data
For FLATMEM contig_page_data has been made transparent to the arch code.
This patch conforms to that change.

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-04 13:20:23 -07:00
Bob Picco da9577c531 [PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile
The patch modifies the Kconfig file to introduce the new memory model
options and other related SPARSEMEM changes.  There is also a minor change
in the Makefile.

Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-04 13:19:30 -07:00
John W. Linville 6c654b5fdf [PATCH] swiotlb: move from arch/ia64/lib/ to lib/
The swiotlb implementation is shared by both IA-64 and EM64T. However,
the source itself lives under arch/ia64. This patch moves swiotlb.c
from arch/ia64/lib to lib/ and fixes-up the appropriate Makefile and
Kconfig files. No actual changes are made to swiotlb.c.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-29 14:42:42 -07:00
Tony Luck d719948e62 [IA64] end of kernel 'data' is at _end, not _edata
/proc/iomem describes a block of memory as "Kernel data",
but the end address is derived from "_edata".  The kernel
actually has many other sections beyond _edata.  Get the
real end address from _end.

Acked-by: Khalid Aziz <khalid_aziz@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-28 16:09:46 -07:00
Mark Maule 61b9cf7c6c [IA64-SGI] fix sn_pci_legacy_read/fix sn_pci_legacy_write
This patch adds a #define for SN_SAL_IOIF_PCI_SAFE and makes that the
preferred method of implementing sn_pci_legacy_read() and
sn_pci_legacy_write().

This SAL call has been present in SGI proms since version 4.10.  If the
SN_SAL_IOIF_PCI_SAFE call fails, revert to the previous code for compatability
with older proms.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-23 11:21:59 -07:00
Bjorn Helgaas 463eb29740 [IA64] respect ACPI producer/consumer flag for PCI root bridges
Address space resources for ACPI devices have a producer/consumer
flag.  All devices "consume" the indicated address space.  If the
resource is marked as a "producer", the range is also passed on
to child devices.

We currently ignore this flag when setting up MMIO and I/O port
windows for PCI root bridges, so we could mistakenly interpret
a "consumed-only" range, like CSR space for the device itself,
as a window that is routed to children.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-23 10:50:09 -07:00
Hidetoshi Seto 4881e2cd25 [IA64] MCA recovery verify pfn_valid
Verify the pfn is valid before calling pfn_to_page(),
and cut isolation message if nothing was done.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-22 13:27:59 -07:00
Keith Owens 20bb86852a [IA64] Wire in the MCA/INIT handler stacks
Wire the MCA/INIT handler stacks into DTR[2] and track them in
IA64_KR(CURRENT_STACK).  This gives the MCA/INIT handler stacks the
same TLB status as normal kernel stacks.  Reload the old CURRENT_STACK
data on return from OS to SAL.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-22 13:24:19 -07:00
Peter Chubb 83a78d9ba7 [IA64] Fix simscsi for new SCSI midlayer
The sd driver now uses scsi_execute_req() for almost everything.
scsi_execute_req() converts requests into scatterlists.

Fix the HP SCSI disk simulator to understand scatterlists for
more commands.

Without this patch the current kernel will not boot on the simulator
(the disks are always detected as having no sectors, and so cannot be
mounted).

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-22 10:42:39 -07:00
Bjorn Helgaas 650316f122 [IA64] move ACPI IOSAPIC locality domain mapping from pci.c to acpi.c
Move acpi_map_iosapics() from pci.c to acpi.c, since it doesn't
have anything to do with PCI.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-19 15:57:48 -07:00
Bjorn Helgaas 44c451208d [IA64] ia64: add ar.k0 usage note
Update comment about how ar.k0 is used.  Make the initialization the
same as in start_secondary() (no functional change, just make it look
more similar).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-19 15:55:48 -07:00
Khalid Aziz be379124c0 [IA64] include EFI memory information in /proc/iomem
User mode kexec tools expect to find information about physical
memory in /proc/iomem (as they do on x86) to validate the addresses
that the new kernel will use.

Signed-off-by: Khalid Aziz <khalid.aziz@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-19 15:42:36 -07:00
Dipankar Sarma 4fb3a53860 [PATCH] files: fix preemption issues
With the new fdtable locking rules, you have to protect fdtable with either
->file_lock or rcu_read_lock/unlock().  There are some places where we
aren't doing either.  This patch fixes those places.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:02 -07:00
Jack Steiner 54703d3678 [IA64] Increase max NR_CPUS on IA64 from 512 to 1024
This patch increases the maximum number of cpus supported on IA64
to 1024. No changes are made to the default SSI size. The patch
simply allows specifying up to 1024p.

There are certainly scaling (& other) issues that also need to be
addressed!!!  Additional patches will follow.....

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-16 11:51:27 -07:00
Hidetoshi Seto 20305e5972 [IA64] mca_drv cleanup
There were some trailing white spaces, long lines, brackets in
weird style etc.  This patch cleans them up.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-16 10:39:40 -07:00
Peter Chubb 24b8e0cc09 [IA64] Remove warnings for gcc 4.0 IA64 compilation.
This patch removes some compilation warnings, mostly
trivially. acpi.c fix also noted by Kenji Kaneshige.

Signed-off-by; Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-16 09:45:27 -07:00
Jack Steiner 24ee0a6d7b [IA64] Cleanup use of various #defines related to nodes
Some of the SN code & #defines related to compact nodes & IO discovery
have gotten stale over the years. This patch attempts to clean them up.
Some of the various SN MAX_xxx #defines were also unclear & misused.

The primary changes are:

	- use MAX_NUMNODES. This is the generic linux #define for the number
	  of nodes that are known to the generic kernel. Arrays & loops
	  for constructs that are 1:1 with linux-defined nodes should
	  use the linux #define - not an SN equivalent.

	- use MAX_COMPACT_NODES for MAX_NUMNODES + NUM_TIOS. This is the
	  number of nodes in the SSI system. Compact nodes are a hack to
	  get around the IA64 architectural limit of 256 nodes. Large SGI
	  systems have more than 256 nodes. When we upgrade to ACPI3.0,
	  I _hope_ that all nodes will be real nodes that are known to
	  the generic kernel. That will allow us to delete the notion
	  of "compact nodes".

	- add MAX_NUMALINK_NODES for the total number of nodes that
	  are in the numalink domain - all partitions.

	- simplified (understandable) scan_for_ionodes()

	- small amount of cleanup related to cnodes

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-15 16:31:12 -07:00
Bjorn Helgaas f2b518d716 [IA64] Update default configs
PNP and PNPACPI turned on

    i8042 recently changed from ACPI to PNP detection.  Without PNP, it
    probes legacy I/O ports for the keyboard controller, which causes an
    MCA on HP boxes.

    Also, I'm about to remove 8250_acpi.c, so we'll need PNP to detect
    non-PCI serial ports.  Until 8250_acpi.c is removed, some systems
    will see serial ports reported twice (once from 8250_acpi.c and again
    from 8250_pnp.c).  This is harmless.

    PNPACPI is still marked EXPERIMENTAL, but I'm not aware of any
    outstanding issues on ia64.

IDE_GENERIC turned off (except for SGI simulator, all ia64 IDE is PCI)

    ide-generic probes compiled-in legacy I/O ports for IDE devices, which
    again causes an MCA.  It would be nicer to just get rid of all the
    legacy junk from include/asm-ia64/ide.h, but that is a bit riskier
    because it could break ide-cs and the HDIO_REGISTER_HWIF ioctl
    (http://www.ussg.iu.edu/hypermail/linux/kernel/0508.2/0049.html).

Here's the essence of the patch:

    -# CONFIG_PNP is not set
    +CONFIG_PNP=y
    +CONFIG_PNPACPI=y

    -CONFIG_IDE_GENERIC=y
    +# CONFIG_IDE_GENERIC is not set

Tested on tiger, bigsur, and zx1.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-15 14:34:31 -07:00
David S. Miller 4db2ce0199 [LIB]: Consolidate _atomic_dec_and_lock()
Several implementations were essentialy a common piece of C code using
the cmpxchg() macro.  Put the implementation in one spot that everyone
can share, and convert sparc64 over to using this.

Alpha is the lone arch-specific implementation, which codes up a
special fast path for the common case in order to avoid GP reloading
which a pure C version would require.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-14 21:47:01 -07:00
Alex Williamson 0b9afede3d [IA64] more robust zx1/sx1000 machvec support
Machine vector selection has always been a bit of a hack given how
early in system boot it needs to be done.  Services like ACPI namespace
are not available and there are non-trivial problems to moving them to
early boot.  However, there's no reason we can't change to a different
machvec later in boot when the services we need are available.  By
adding a entry point for later initialization of the swiotlb, we can add
an error path for the hpzx1 machevec initialization and fall back to the
DIG machine vector if IOMMU hardware isn't found in the system.  Since
ia64 uses 4GB for zone DMA (no ISA support), it's trivial to allocate a
contiguous range from the slab for bounce buffer usage.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-14 16:22:11 -07:00
Tony Luck deb75f3c29 Pull fix-offsets-h into release branch 2005-09-14 14:14:45 -07:00
Hugh Dickins 2fd4ef85e0 [PATCH] error path in setup_arg_pages() misses vm_unacct_memory()
Pavel Emelianov and Kirill Korotaev observe that fs and arch users of
security_vm_enough_memory tend to forget to vm_unacct_memory when a
failure occurs further down (typically in setup_arg_pages variants).

These are all users of insert_vm_struct, and that reservation will only
be unaccounted on exit if the vma is marked VM_ACCOUNT: which in some
cases it is (hidden inside VM_STACK_FLAGS) and in some cases it isn't.

So x86_64 32-bit and ppc64 vDSO ELFs have been leaking memory into
Committed_AS each time they're run.  But don't add VM_ACCOUNT to them,
it's inappropriate to reserve against the very unlikely case that gdb
be used to COW a vDSO page - we ought to do something about that in
do_wp_page, but there are yet other inconsistencies to be resolved.

The safe and economical way to fix this is to let insert_vm_struct do
the security_vm_enough_memory check when it finds VM_ACCOUNT is set.

And the MIPS irix_brk has been calling security_vm_enough_memory before
calling do_brk which repeats it, doubly accounting and so also leaking.
Remove that, and all the fs and arch calls to security_vm_enough_memory:
give it a less misleading name later on.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14 11:18:13 -07:00
Tony Luck 82f1b07b9a [IA64] fix circular dependency on generation of asm-offsets.h
Fix?  One ugly hack is replaced by a different ugly hack.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-13 08:50:39 -07:00
Tsuneo.Yoshioka@f-secure.com 83b942bd34 [PATCH] x86-64: Fix 32bit sendfile
If we use 64bit kernel on ia64/x86_64/s390 architecture, and we run
32bit binary on 32bit compatibility mode, sendfile system call seems be
not set offset argument.

This is because sendfile's return value is not zero but the code regards
the result by return value is zero or not.

This problem will be affect to ia64/x86_64/s390 and not affect to other
architecture does not affect other architecture (mips/parisc/ppc64/sparc64).

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 10:49:57 -07:00
Linus Torvalds 357d596bd5 Merge branch 'release' of master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6 2005-09-11 15:51:40 -07:00
Tony Luck d67eb16f5d Pull sn-features into release branch 2005-09-11 14:34:23 -07:00
Tony Luck c85b2a5fe2 Pull sim-fixes into release branch 2005-09-11 14:27:15 -07:00
Keith Owens 49a28cc8fd [IA64] MCA/INIT: remove obsolete unwind code
Delete the special case unwind code that was only used by the old
MCA/INIT handler.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11 14:09:34 -07:00
Keith Owens 05f335ea04 [IA64] MCA/INIT: remove the physical mode path from minstate.h
Remove the physical mode path from minstate.h.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11 14:09:12 -07:00
Keith Owens 7f613c7d22 [PATCH] MCA/INIT: use per cpu stacks
The bulk of the change.  Use per cpu MCA/INIT stacks.  Change the SAL
to OS state (sos) to be per process.  Do all the assembler work on the
MCA/INIT stacks, leaving the original stack alone.  Pass per cpu state
data to the C handlers for MCA and INIT, which also means changing the
mca_drv interfaces slightly.  Lots of verification on whether the
original stack is usable before converting it to a sleeping process.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11 14:08:41 -07:00
Keith Owens 289d773ee8 [IA64] MCA/INIT: avoid reading INIT record during INIT event
Reading the INIT record from SAL during the INIT event has proved to be
unreliable, and a source of hangs during INIT processing.  The new
MCA/INIT handlers remove the need to get the INIT record from SAL.
Change salinfo.c so mca.c can just flag that a new record is available,
without having to read the record during INIT processing.  This patch
can be applied without the new MCA/INIT handlers.

Also clean up some usage of NR_CPUS which should have been using
cpu_online().

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11 14:02:43 -07:00
Sam Ravnborg 5bb7826900 kbuild: rename prepare to archprepare to fix dependency chain
When introducing the generic asm-offsets.h support the dependency
chain for the prepare targets was changed. All build scripts expecting
include/asm/asm-offsets.h to be made when using the prepare target would broke.
With the limited number of prepare targets left in arch Makefiles
the trivial solution was to introduce a new arch specific target: archprepare

The dependency chain looks like this now:

prepare
  |
  +--> prepare0
         |
         +--> archprepare
                |
		+--> scripts_basic
                +--> prepare1
                       |
                       +---> prepare2
                               |
                               +--> prepare3

So prepare 3 is processed before prepare2 etc.
This guaantees that the asm symlink, version.h, scripts_basic
are all updated before archprepare is processed.

prepare0 which build the asm-offsets.h file will need the
actions performed by archprepare.

The head target is now named prepare, because users scripts will most
likely use that target, but prepare-all has been kept for compatibility.
Updated Documentation/kbuild/makefiles.txt.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-11 22:30:22 +02:00
Ingo Molnar fb1c8f93d8 [PATCH] spinlock consolidation
This patch (written by me and also containing many suggestions of Arjan van
de Ven) does a major cleanup of the spinlock code.  It does the following
things:

 - consolidates and enhances the spinlock/rwlock debugging code

 - simplifies the asm/spinlock.h files

 - encapsulates the raw spinlock type and moves generic spinlock
   features (such as ->break_lock) into the generic code.

 - cleans up the spinlock code hierarchy to get rid of the spaghetti.

Most notably there's now only a single variant of the debugging code,
located in lib/spinlock_debug.c.  (previously we had one SMP debugging
variant per architecture, plus a separate generic one for UP builds)

Also, i've enhanced the rwlock debugging facility, it will now track
write-owners.  There is new spinlock-owner/CPU-tracking on SMP builds too.
All locks have lockup detection now, which will work for both soft and hard
spin/rwlock lockups.

The arch-level include files now only contain the minimally necessary
subset of the spinlock code - all the rest that can be generalized now
lives in the generic headers:

 include/asm-i386/spinlock_types.h       |   16
 include/asm-x86_64/spinlock_types.h     |   16

I have also split up the various spinlock variants into separate files,
making it easier to see which does what. The new layout is:

   SMP                         |  UP
   ----------------------------|-----------------------------------
   asm/spinlock_types_smp.h    |  linux/spinlock_types_up.h
   linux/spinlock_types.h      |  linux/spinlock_types.h
   asm/spinlock_smp.h          |  linux/spinlock_up.h
   linux/spinlock_api_smp.h    |  linux/spinlock_api_up.h
   linux/spinlock.h            |  linux/spinlock.h

/*
 * here's the role of the various spinlock/rwlock related include files:
 *
 * on SMP builds:
 *
 *  asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the
 *                        initializers
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  asm/spinlock.h:       contains the __raw_spin_*()/etc. lowlevel
 *                        implementations, mostly inline assembly code
 *
 *   (also included on UP-debug builds:)
 *
 *  linux/spinlock_api_smp.h:
 *                        contains the prototypes for the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 *
 * on UP builds:
 *
 *  linux/spinlock_type_up.h:
 *                        contains the generic, simplified UP spinlock type.
 *                        (which is an empty structure on non-debug builds)
 *
 *  linux/spinlock_types.h:
 *                        defines the generic type and initializers
 *
 *  linux/spinlock_up.h:
 *                        contains the __raw_spin_*()/etc. version of UP
 *                        builds. (which are NOPs on non-debug, non-preempt
 *                        builds)
 *
 *   (included on UP-non-debug builds:)
 *
 *  linux/spinlock_api_up.h:
 *                        builds the _spin_*() APIs.
 *
 *  linux/spinlock.h:     builds the final spin_*() APIs.
 */

All SMP and UP architectures are converted by this patch.

arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via
crosscompilers.  m32r, mips, sh, sparc, have not been tested yet, but should
be mostly fine.

From: Grant Grundler <grundler@parisc-linux.org>

  Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU).
  Builds 32-bit SMP kernel (not booted or tested).  I did not try to build
  non-SMP kernels.  That should be trivial to fix up later if necessary.

  I converted bit ops atomic_hash lock to raw_spinlock_t.  Doing so avoids
  some ugly nesting of linux/*.h and asm/*.h files.  Those particular locks
  are well tested and contained entirely inside arch specific code.  I do NOT
  expect any new issues to arise with them.

 If someone does ever need to use debug/metrics with them, then they will
  need to unravel this hairball between spinlocks, atomic ops, and bit ops
  that exist only because parisc has exactly one atomic instruction: LDCW
  (load and clear word).

From: "Luck, Tony" <tony.luck@intel.com>

   ia64 fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjanv@infradead.org>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se>
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:21 -07:00
Linus Torvalds 486a153f0e Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild 2005-09-09 15:46:49 -07:00
Ingo Molnar a9f6a0dd54 [PATCH] more SPIN_LOCK_UNLOCKED -> DEFINE_SPINLOCK conversions
This converts the final 20 DEFINE_SPINLOCK holdouts.  (another 580 places
are already using DEFINE_SPINLOCK).  Build tested on x86.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:48 -07:00
Dipankar Sarma badf16621c [PATCH] files: break up files struct
In order for the RCU to work, the file table array, sets and their sizes must
be updated atomically.  Instead of ensuring this through too many memory
barriers, we put the arrays and their sizes in a separate structure.  This
patch takes the first step of putting the file table elements in a separate
structure fdtable that is embedded withing files_struct.  It also changes all
the users to refer to the file table using files_fdtable() macro.  Subsequent
applciation of RCU becomes easier after this.

Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:55 -07:00
Chen, Kenneth W 383f2835eb [PATCH] Prefetch kernel stacks to speed up context switch
For architecture like ia64, the switch stack structure is fairly large
(currently 528 bytes).  For context switch intensive application, we found
that significant amount of cache misses occurs in switch_to() function.
The following patch adds a hook in the schedule() function to prefetch
switch stack structure as soon as 'next' task is determined.  This allows
maximum overlap in prefetch cache lines for that structure.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:31 -07:00
Sam Ravnborg 39e01cb874 kbuild: ia64 use generic asm-offsets.h support
Delete obsolete stuff from arch Makefile
Rename file to asm-offsets.h
The trick used in the arch Makefile to circumvent the circular
dependency is kept.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 22:03:13 +02:00
Tony Luck 1fa9295728 [IA64] Need to include <asm/sn/io.h> in a few more places.
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-09 11:41:12 -07:00
Tony Luck 344a076110 [IA64] Manual merge fix for 3 files
arch/ia64/Kconfig
	arch/ia64/kernel/acpi.c
	include/asm-ia64/irq.h

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-08 14:27:13 -07:00
Jack Steiner 9b17e7e74e [IA64] Increase max physical address for SN platforms
Increase the value for the maximum physical address on SN systems.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-08 13:53:38 -07:00
Dean Nelson 408865ce48 [IA64] ensure XPC and XPNET are loaded on sn2 platforms only
These are SN2 only drivers.  They should have platform checks to prevent
them from doing evil stuff in GENERIC kernels.

Signed-off-by: Martin Hicks <mort@sgi.com>
Acked-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-08 13:53:09 -07:00
Martin Hicks 087f902686 [IA64] defconfig: turn off QLOGIC_FC
Turn off the QLOGIC_FC driver.  Supposedly qla2xxx should support
these devices.  Do any ia64 machines have one of these devices as
the boot device?

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-08 13:48:50 -07:00
Tony Luck d8c97d5f3a [IA64] simplified efi memory map parsing
New version leaves the original memory map unmodified.
Also saves any granule trimmings for use by the uncached
memory allocator.

Inspired by Khalid Aziz (various traces of his patch still
remain).  Fixes to uncached_build_memmap() and sn2 testing
by Martin Hicks.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-08 12:39:59 -07:00
Len Brown 64e47488c9 Merge linux-2.6 with linux-acpi-2.6 2005-09-08 01:45:47 -04:00
viro@ZenIV.linux.org.uk e72225d160 [PATCH] bogus #if (simserial)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:17:34 -07:00
Keshavamurthy Anil S deac66ae45 [PATCH] kprobes: fix bug when probed on task and isr functions
This patch fixes a race condition where in system used to hang or sometime
crash within minutes when kprobes are inserted on ISR routine and a task
routine.

The fix has been stress tested on i386, ia64, pp64 and on x86_64.  To
reproduce the problem insert kprobes on schedule() and do_IRQ() functions
and you should see hang or system crash.

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:01 -07:00
Keshavamurthy Anil S 661e5a3d99 [PATCH] Kprobes/IA64: fix race when break hits and kprobe not found
This patch addresses a potential race condition for a case where Kprobe has
been removed right after another CPU has taken a break hit.

The way this is addressed here is when the CPU that has taken a break hit
does not find its corresponding kprobe, then we check to see if the
original instruction got replaced with other than break.  If it got
replaced with other than break instruction, then we continue to execute
from the replaced instruction, else if we find that it is still a break,
then we let the kernel handle this, as this might be the break instruction
inserted by other than kprobe(may be kernel debugger).

Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:00 -07:00
Prasanna S Panchamukhi 1f7ad57b75 [PATCH] Kprobes: prevent possible race conditions ia64 changes
This patch contains the ia64 architecture specific changes to prevent the
possible race conditions.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:58:00 -07:00
Pekka Enberg f96cb1f058 [PATCH] IA64: convert kcalloc to kzalloc
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:45 -07:00
Miklos Szeredi e922efc342 [PATCH] remove duplicated sys_open32() code from 64bit archs
64 bit architectures all implement their own compatibility sys_open(),
when in fact the difference is simply not forcing the O_LARGEFILE
flag.  So use the a common function instead.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:43 -07:00
John Hawkes 9c1cfda20a [PATCH] cpusets: Move the ia64 domain setup code to the generic code
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:40 -07:00
John Hawkes f68f447e83 [PATCH] ia64 cpuset + build_sched_domains() mangles structures
I've already sent this to the maintainers, and this is now being sent to a
larger community audience.  I have fixed a problem with the ia64 version of
build_sched_domains(), but a similar fix still needs to be made to the
generic build_sched_domains() in kernel/sched.c.

The "dynamic sched domains" functionality has recently been merged into
2.6.13-rcN that sees the dynamic declaration of a cpu-exclusive (a.k.a.
"isolated") cpuset and rebuilds the CPU Scheduler sched domains and sched
groups to separate away the CPUs in this cpu-exclusive cpuset from the
remainder of the non-isolated CPUs.  This allows the non-isolated CPUs to
completely ignore the isolated CPUs when doing load-balancing.

Unfortunately, build_sched_domains() expects that a sched domain will
include all the CPUs of each node in the domain, i.e., that no node will
belong in both an isolated cpuset and a non-isolated cpuset.  Declaring a
cpuset that violates this presumption will produce flawed data structures
and will oops the kernel.

To trigger the problem (on a NUMA system with >1 CPUs per node):
   cd /dev/cpuset
   mkdir newcpuset
   cd newcpuset
   echo 0 >cpus
   echo 0 >mems
   echo 1 >cpu_exclusive

I have fixed this shortcoming for ia64 NUMA (with multiple CPUs per node).
A similar shortcoming exists in the generic build_sched_domains() (in
kernel/sched.c) for NUMA, and that needs to be fixed also.  The fix
involves dynamically allocating sched_group_nodes[] and
sched_group_allnodes[] for each invocation of build_sched_domains(), rather
than using global arrays for these structures.  Care must be taken to
remember kmalloc() addresses so that arch_destroy_sched_domains() can
properly kfree() the new dynamic structures.

Signed-off-by: John Hawkes <hawkes@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:39 -07:00
Ashok Raj 54d5d42404 [PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity
When handling writes to /proc/irq, current code is re-programming rte
entries directly. This is not recommended and could potentially cause
chipset's to lockup, or cause missing interrupts.

CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the
interrupt is pending. The same needs to be done for /proc/irq handling as well.
Otherwise user space irq balancers are really not doing the right thing.

- Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for
  lack of a generic name.
- added move_irq out of IRQ_BALANCE, and added this same to X86_64
- Added new proc handler for write, so we can do deferred write at irq
  handling time.
- Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead
  it now shows only active cpu masks, or exactly what was set.
- Provided a common move_irq implementation, instead of duplicating
  when using generic irq framework.

Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off.
Tested UP builds as well.

MSI testing: tbd: I have cards, need to look for a x-over cable, although I
did test an earlier version of this patch.  Will test in a couple days.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Zwane Mwaikambo <zwane@holomorphy.com>
Grudgingly-acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:15 -07:00
Mark Maule 5fbcf9a5c6 [IA64-SGI] volatile semantics in places where it seems necessary
Resend using accessors instead of volatile qualifiers per hch comments, and
easier to understand convenience macros per rja comments.

Patch to apply volatile semantics when accessing MMR's in various SN files.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-07 16:23:41 -07:00
Kenji Kaneshige 697eaad417 [IA64] Minor cleanups - remove CONFIG_ACPI_DEALLOCATE_IRQ
The config option 'CONFIG_ACPI_DEALLOCATE_IRQ' is no longer
needed. This patch removes it.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-07 14:00:08 -07:00
Chen, Kenneth W 0232622324 [IA64] minor performance tune-up in ia64_switch_to
The reenabling of psr.ic should really belong to dtr mapping code block.
It make the fall through code fast since it doesn't need to execute the
predicated-off instruction.  Logically make more sense as well since psr.ic
was turned off in .map code block.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-07 13:56:23 -07:00
Chen, Kenneth W 295bd89279 [IA64] make exception handler in copy_user more robust
The exception handler in copy user always expects fault occurs only on
user space address and the fall back recovery code is written with that
very assumption in mind.  Recent source code inspection revealed that
while it worked splendid and to the expectation under normal circumstances,
It broke down under unexpected condition where some address calculation
might go outside the legal address range the original copy_user was
called for.  This patch is to make copy_user exception handler more robust
and to prevent potential memory corruption.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-07 08:53:16 -07:00
Dean Nelson a607c38971 [IA64-SGI] get XPC to cleanly disengage from remote memory references
When XPC is being shutdown (i.e., rmmod, reboot) it doesn't ensure that
other partitions with whom it was connected have completely disengaged
from any attempt at cross-partition memory references. This can lead to
MCAs in any of these other partitions when the partition is reset.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-06 16:15:38 -07:00
Kiyoshi Ueda 63028aa7f5 [IA64] page_not_present fault in region 5 is normal
When copying data from user-space to kernel-space by __copy_user(),
a page_not_present fault sometimes occurs at vmalloced kernel address
because of VHPT pre-fetching.

Ignore the page_not_present fault in ia64_do_page_fault() before
jumping into exception handlers.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-06 16:06:58 -07:00
Bruce Losure 25732ad493 [IA64] Altix patch for fpga reset
1) workaround a h/w reset issue
2) to improve the determination of FPGA-based h/w in
   the arch/ia64/sn/kernel/tiocx code.

Signed-off-by: Bruce Losure <blosure@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-06 14:16:01 -07:00
Len Brown 129521dcc9 Merge linux-2.6 into linux-acpi-2.6 test 2005-09-03 02:44:09 -04:00
Martin Hicks a994018a5f [IA64] uncached allocator: use generic (not sn2 specific) functions
Change sn2-specific calls into generic functions.  Without this change
the uncached allocator will not work on non-sn2 platforms.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31 14:18:04 -07:00
Jack Steiner a1cddb8892 [IA64-SGI] Add new vendor-specific SAL calls for:
- notifying the PROM of specific features that are supported by the OS.
  This is used to enable PROM feature if and only if the corresponding
  feature is implemented in the OS

- fetch feature sets that are supported by the current PROM. This allows
  the OS to selectively enable features when the PROM support is available.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31 11:00:53 -07:00
Peter Chubb 6cf07a8cc8 [IA64] Fix nasty VMLPT problem...
I've solved the problem I was having with the simulator and not
booting Debian.

The problem is that the number of bits for the virtual linear array
short-format VHPT (Virtually mapped linear page table, VMLPT for
short) is being tested incorrectly. 

There are two problems:
      1. The PAL call that should tell the kernel the size of the
      virtual address space isn't implemented for the simulator, so
      the kernel uses the default 50.  This is addressed separately
      in dc90e95f31

      2.  In arch/ia64/mm/init.c there's code to calcualte the size
      of the VMLPT based on the number of implemented virtual address
      bits and the page size.  It checks to see if the VMLPT base
      address overlaps the top of the mapped region, but this check
      doesn't allow for the address space hole, and in fact will
      never trigger.

Here's an alternative test and panic, that I think is more accurate.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31 08:35:22 -07:00
Peter Chubb 714d2dc149 [IA64] Allow /proc/pal/cpu0/vm_info under the simulator
Not all of the PAL VM calls are implemented for the SKI simulator.
Don't just give up if one fails, print information from the calls
that succeed.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31 08:34:51 -07:00
Peter Chubb dc90e95f31 [IA64] Add PAL_VM_SUMMARY/PAL_MEM_ATTRIB to bootloader for SKI
This patch implements PAL_VM_SUMMARY (and PAL_MEM_ATTRIB for good
measure) and pretends that the simulated machine is a McKinley.

Some extra comments and clean-up by Tony Luck.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-31 08:32:03 -07:00
Tony Luck 288ceb8f14 Auto-update from upstream 2005-08-30 09:30:09 -07:00
Tony Luck 3290580285 Pull rationalise-regions into release branch 2005-08-29 15:50:32 -07:00
Tony Luck bcdd3a9114 Pull ngam-maule-steiner into release branch 2005-08-29 15:48:51 -07:00
Tony Luck b946ecbb11 Pull pending-2.6.14 into release branch 2005-08-29 15:48:23 -07:00
Tony Luck 7115c13bd6 Pull acpi-p-state into release branch 2005-08-29 14:15:10 -07:00
Tony Luck 7d2e423add Pull asm-segment into release branch 2005-08-29 14:14:40 -07:00
Tony Luck 3ec8a773d2 Pull swiotlb-size into release branch 2005-08-29 14:14:18 -07:00
Len Brown 27a639a92d Auto-update from upstream 2005-08-29 17:02:17 -04:00
Steven Rostedt 69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00
Kenneth Chen f8220c7f15 [IA64] Delete erroneous copy_page.o in global lib-y list
copy_page.o appeared twice in arch/ia64/lib/Makefile. The
one in global lib-y is wrong where it should be just in
lib-$(CONFIG_ITANIUM).

Both copy_page.o and copy_page_mck.o are build for Itanium2
processor and the link order will pick up the low performing
copy_page function (originally written for itanium processor).
In this case, we really want the copy_page_mck.o for optimized
version.

Signed-off-by: Kenneth Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 16:01:25 -07:00
Venkatesh Pallipadi 4db8699bcf [IA64] Add ACPI based P-state support
Patch to support P-state transitions on ia64. This driver is based on ACPI,
and uses the ACPI processor driver interface to find out the P-state support
information for the processor. This driver plugs into generic cpufreq
infrastructure.

Once this driver is loaded successfully, ondemand/userspace governor can be
used to change the CPU frequency dynamically based on load or on request from
userspace process.

Refer :
ACPI specification -
      http://www.acpi.info
P-state related PAL calls -
      http://developer.intel.com/design/itanium/downloads/24869909.pdf

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 15:09:24 -07:00
Russ Anderson d1e079b3fc [IA64-SGI] fix bte_copy() calling smp_processor_id() while preemptible
bte_copy() calls calls smp_processor_id(), which will get flagged if
preemption if enabled.  raw_smp_processor_id() is used instead 
because we are just using it to pick a BTE interface and are not 
tied to a specific cpu.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 15:01:37 -07:00
Mark Maule 8409668b56 [IA64] altix: Abstract irq_affinity at the sn pci provider
Altix patch to abstract irq_affinity down to the pci provider level since
different SGI hardware implements this in different ways.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26 12:09:01 -07:00
Len Brown 09d4a80e66 Merge HEAD from ../from-linus 2005-08-25 12:45:49 -04:00
Len Brown d0d59b98d7 [IA64] fix allnoconfig build
cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25 12:42:52 -04:00
Len Brown 6153df7b2f [ACPI] delete CONFIG_ACPI_PCI
Delete the ability to build an ACPI kernel that does
not include PCI support.  When such a machine is created
and it requires a tuned kernel, send a patch.

http://bugzilla.kernel.org/show_bug.cgi?id=1364

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25 12:40:44 -04:00
Len Brown eb7b6b3264 [ACPI] IA64-related ACPI Kconfig fixes
Build issues were mostly in the ACPI=n case -- don't do that.
Select ACPI from IA64_GENERIC.
Add some missing dependencies on ACPI.

Mark BLACKLIST_YEAR and some laptop-only ACPI drivers
as X86-only.  Let me know when you get an IA64 Laptop.

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25 12:14:20 -04:00
Russ Anderson 5b9021bc58 [IA64] SGI SN remove redundant partition SAL call
Clean up of SGI SN partitioning related code.
The SN_SAL_GET_SN_INFO SAL call returns the partition ID, making
the SN_SAL_SYSCTL_PARTITION_GET SAL call redundant.  Remove sn_partid
and use sn_partition_id.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:26:13 -07:00
Mark Goodwin 5390970d1c [IA64] - SGI SN hwperf enhancements -
Update the SN pci device info to use the nearest node function
to allocate driver memory on the nearest node (rather than
defaulting to node 0).

Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:25:21 -07:00
Mark Goodwin 60a3ba0bb4 [IA64] - SGI SN hwperf enhancements -
Add a new exported function for determining the nearest node
with CPUs for I/O nodes and fix a bug where the hwperf dynamic
misc device was being registered before misc_init(). 

Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:24:42 -07:00
Mark Goodwin ecc3c30ae3 [IA64] - SGI SN hwperf enhancements - export_pci_topology
Bugfix to export PCI topology information in /proc/sgi_sn/sn_topology.

Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 16:23:39 -07:00
Peter Chubb 0a41e25011 [IA64] Rationalise Region Definitions
Currently, region numbers are defined in several files, with several 
names.  For example, we have REGION_KERNEL in asm/page.h and 
RGN_KERNEL in pgtable.h 
 
We also have address definitions that should depend on the 
RGN_XXX macros, but are currently just long constants. 
 
The following patch reorganises all the definitions so that they have 
the same form (RGN_XXX), are in one place, and that addresses that 
depend on RGN_XXX are derived from them. 

(This is a necessary but not sufficient patch to allow UML-like 
operation on IA64). 

Thanks to David Mosberger for catching the change I missed in mmu_context.h.
 
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> 
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 15:35:41 -07:00
Adrian Bunk 38d26b9f57 [IA64] arch/ia64/hp/sim/boot/fw-emu.c: remove egcs workaround
Kernel 2.6 doesn't support egcs, and I didn't find any user of this 
function.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 14:50:37 -07:00
Kumar Gala a877bd36f7 [IA64] remove use of asm/segment.h
Removed IA64 architecture specific users of asm/segment.h
The removal of asm-ia64/segment.h itself can wait until all
of the kernel source has been purged of references.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-24 13:23:30 -07:00
Keith Owens 41290c1464 [PATCH] Export pcibios_bus_to_resource
pcibios_bus_to_resource is exported on all architectures except ia64
and sparc.  Add exports for the two missing architectures.  Needed when
Yenta socket support is compiled as a module.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24 10:22:44 -07:00
Len Brown 76f5858482 [ACPI] delete CONFIG_ACPI_BUS
it is a synonym for CONFIG_ACPI

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:11:34 -04:00
Len Brown 8466361ad5 [ACPI] delete CONFIG_ACPI_INTERPRETER
it is a synonym for CONFIG_ACPI

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:10:43 -04:00
Len Brown 888ba6c62b [ACPI] delete CONFIG_ACPI_BOOT
it has been a synonym for CONFIG_ACPI since 2.6.12

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:08:54 -04:00
Len Brown 84ffa74752 Merge from-linus to-akpm 2005-08-23 22:12:23 -04:00
Peter Chubb a4cce10492 [IA64] Fix simulator boot (for real this time).
Thanks to Stephane, we've now worked out the real cause of the
`Linux  will not boot on simulator' problem.  Turns out it's a stack
overflow because the stack pointer wasn't being initialised properly
in boot_head.S (it was being initialised to the lowest instead of the
highest address of the stack, so the first push started to overwrite
data in the BSS).

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23 07:41:56 -07:00
Tony Luck 62d75f3753 [IA64] backout incorrect fix for simulator boot issue
Earlier fix in 4aec0fb122 just
masked the real problem.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-23 07:39:15 -07:00
Tony Luck 034e5356a4 Pull prarit-bus-sysdata into release branch 2005-08-23 07:27:28 -07:00
Alex Williamson e8579e72ca [IA64, X86_64] fix swiotlb sizing
Fix swiotlb sizing to match what the comments and the kernel
parameters documentation indicate.  Given a default 16k page size kernel
(ia64) and a 2k swiotlb page size, we're off by a multiple of 8 trying
to size the swiotlb.  When specified on the boot line, the swiotlb is
made 8x bigger than requested.  When left to the default value, it's 8x
smaller than the comments indicate.  For x86_64 the multiplier would be
2x.  The patch below fixes this.  Now, what's a good default swiotlb
size?  Apparently we don't really need 64MB.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-18 16:33:28 -07:00
Ian Wienand 4aec0fb122 [IA64] Simulator bootloader fails with gcc 4
After building a fresh tree with gcc 4 I can't boot the simulator as
the bootloader loader dies with 

loading /home/ianw/kerntest/kerncomp//build/sim_defconfig/vmlinux...
failed to read phdr

After some investigation I believe this is do with differences between
the alignment of variables on the stack between gcc 3 and 4 and the
ski simulator.  If you trace through with the simulator you can see
that the disk_stat structure value returned from the SSC_WAIT_COMPLETION
call seems to be only half loaded.  I guess it doesn't like the alignment
of the input.

Signed-off-by: Ian Wienand <ianw@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-18 14:10:41 -07:00
Jack Steiner 470ceb05d9 [IA64-SGI] - New SN hardware support - ptc_fixes
Shub2 provides a much improved mechanism for issuing internode
TLB purges. Add code to support the newer mechanism. There is also 
some debug code (disabled) that is useful for testing.

Collect statistics on the number, type & duration of TLB purges.
This data will be useful for making future improvements in the algorithms.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:32:24 -07:00
Jack Steiner 68b9753f47 [IA64-SGI] - New SN hardware support - cpu_relax
Add a few missing calls to "hint @pause".

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:31:53 -07:00
Jack Steiner 7e95b9d6e2 [IA64-SGI] - New SN hardware support - bte_fixes
Change the BTE driver so that it works for both shub1 and
shub2. Most of the changes are related to the number of cores
that use the BTE engine, to the MMR addresses of various
shub registers, and to using the correct processor or network
physical address.

Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:31:14 -07:00
Jack Steiner 1007d02160 [IA64-SGI] - New SN hardware support - no_wars
Disable some shub1-specific code when running on systems with shub2.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:30:44 -07:00
Jack Steiner 2fdbb590e4 [IA64-SGI] - New SN hardware support - boot_init_shub2
Update the addresses of the pio_write_status_addr so that
they are correct for newer processors. Shub2 did not number
the threads in the order that I had expected.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:30:14 -07:00
Jack Steiner 0aa2c72e59 [IA64-SGI] - New SN hardware support - use_alias_space
Use local SHUB alias space when referencing MMRs that are known
to be node local. There is a slight performance benefit & code 
simplification.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 15:29:43 -07:00
Tony Luck c149ec05dc [IA64] Updated tiger defconfig
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-17 10:24:17 -07:00
Peter Chubb 7f09d6f935 [IA64] Updated zx1 defconfig
Just `make oldconfig' doesn't help for the zx1 defconfig ---
because we need the MPT Fusion drivers, which are picked up as not
selected.
Tested on HP ZX2000 and ZX2600.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 17:34:31 -07:00
Greg Edwards 7b1a843f46 [IA64] Refresh arch/ia64/configs/sn2_defconfig.
Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 16:26:36 -07:00
Keith Owens 71841b8fe7 [IA64] Initialize some spinlocks
Some IA64 spinlocks are not being initialized, make it so.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 15:33:26 -07:00
Prarit Bhargava c1ffb910f7 [IA64]: SN fix bus->sysdata pointer and memory cleanups
The main issue is that bus_fixup calls may potentially call
functions that require a valid bus->sysdata pointer.  Since
this is the case, we must set the bus->sysdata pointer before
calling the bus_fixup functions.  The remaining changes are
simple fixes to make sure memory is cleaned up in the function.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16 15:24:48 -07:00
Tony Luck f7001e8f1f Auto-update from upstream 2005-08-16 11:29:57 -07:00
John Hawkes 367ae3cd74 [PATCH] fix for ia64 sched-domains code
Fix for ia64 sched domain building triggered by cpuset code.

Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 08:54:00 -07:00
MAEDA Naoaki 702c7e7626 [ACPI] fix ia64 build issues resulting from Lindent and merge
Signed-off-by: MAEDA Naoaki <maeda.naoaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Brown, Len <len.brown@intel.com>
2005-08-15 22:26:06 -04:00
Christoph Hellwig 85f265d887 [IA64] update CONFIG_PCI description
The current one doesn't even make sense anymore on i386 where it
apparently came from.

Follow-up wordsmithing by Matthew Wilcox and Tony Luck.


Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-15 15:03:12 -07:00
Mark Maule c9221da9f2 [IA64-SGI] sn pci provider for TIOCE (pci
Altix patch to add an SN pci provider for TIOCE, which is SGI's 
PCI Express implementation.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:56:31 -07:00
Mark Maule 5b53ed1f2e [IA64-SGI] add support for TIO huge-window
Altix patch to add TIO "huge-window" address support to sn_dma_flush().

Update copyright in affected files.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:37:13 -07:00
Mark Maule 735e60f4c6 [IA64-SGI] abstract force_interrupt() mechanism
Altix patch to abstract the force_interrupt() mechanism away from the
pcibr provider.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:36:39 -07:00
Mark Maule 89963d16dc [IA64-SGI] altix: cosmetic rename of SGI_PCIBR_ERROR
Cosmetic altix patch to rename SGI_PCIBR_ERROR to something more generic and
remove a duplicate #define.

Signed-off-by: Mark Maule <maule@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:36:00 -07:00
Colin Ngam 674c6479b7 [IA64-SGI] Altix only: Add PCI Domain number support.
This patch enables PCI Domain numbering on Altix.

Signed-off-by: Colin Ngam <cngam@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-11 15:35:13 -07:00
Len Brown 95f193aa4f Merge ../to-linus 2005-08-11 00:56:08 -04:00
stephane.eranian@hp.com 6bf11e8c70 [IA64] fix perfmon context load
The PFM_LOAD_CONTEXT may fail silently and cause a session
to remain reserved even though it should not. This can happen
when the commands succeeds in reserving the session but fails
when it actually tries to attach to the load_pid. In that case,
the command has failed but will return 0. More importantly,
the session will remain reserved. This patch fixes the problem.

Signed-off-by: <stephane.eranian@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-10 16:21:58 -07:00
Ken Chen fb573856b2 [IA64] fix nohalt boot option
this changeset broke the "nohalt" kernel boot option.
  8df5a500a3

default_idle() is looking at new variable can_do_pal_halt.  However,
that variable did not get cleared upon "nohalt" boot option.  Result
is that "nohalt" option is ignored until perfmon is exercised.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-08 15:39:47 -07:00
Len Brown 4be44fcd3b [ACPI] Lindent all ACPI files
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05 00:45:14 -04:00
Len Brown 1d492eb413 [ACPI] Merge acpi-2.6.12 branch into 2.6.13-rc3
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05 00:31:42 -04:00
Kenji Kaneshige 14454a1b3f [ACPI] iosapic_register_intr() now returns error instead of panic
error condition is passed along by acpi_register_gsi().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04 22:25:48 -04:00
Kenji Kaneshige 1f3a6a1577 [ACPI] acpi_register_gsi() can return error
Current acpi_register_gsi() function has no way to indicate errors to its
callers even though acpi_register_gsi() can fail to register gsi because of
some reasons (out of memory, lack of interrupt vectors, incorrect BIOS, and so
on).  As a result, caller of acpi_register_gsi() cannot handle the case that
acpi_register_gsi() fails.  I think failure of acpi_register_gsi() should be
handled properly.

This series of patches changes acpi_register_gsi() to return negative value on
error, and also changes callers of acpi_register_gsi() to handle failure of
acpi_register_gsi().

This patch changes the type of return value of acpi_register_gsi() from
"unsigned int" to "int" to indicate an error.  If acpi_register_gsi() fails to
register gsi, it returns negative value.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-04 22:12:08 -04:00
Ingo Molnar 6cb54819d7 [PATCH] remove sys_set_zone_reclaim()
This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 10:03:56 -07:00
Keith Owens b833961bd3 [IA64] unwind.c uses wrong unat from switch_stack
unwind.c can read the wrong unat bits from switch_stack.
sw->caller_unat is the value of ar.unat when the task was blocked.
sw->ar_unat is the value of ar.unat after doing st8.spill for r4-7.
IOW, ar_unat is caller_unat with 4 bits changed.

unw_access_gr() uses sw->ar_unat for r4-7 (correct), but it also uses
sw->ar_unat for other scratch registers (incorrect).  sw->ar_unat
should only be used for r4-7, everything else should use
sw->caller_unat, unless modified by unwind info.  Using sw->ar_unat
risks picking up the 4 bits that were overwritten when r4-7 were saved.

Also this line is wrong
	unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_UNAT);
and should be
	unw.sw_off[unw.preg_index[UNW_REG_PFS]] = SW(AR_PFS);

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-27 14:18:08 -07:00
Robert Love d108919b2b [IA64] inotify: ia64 syscalls.
Attached patch adds the inotify syscalls to ia64.

Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-27 10:46:12 -07:00
Steven Rostedt d46523ea32 [PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO
Here's the patch again to fix the code to handle if the values between
MAX_USER_RT_PRIO and MAX_RT_PRIO are different.

Without this patch, an SMP system will crash if the values are
different.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 15:40:00 -07:00
Eric W. Biederman 59586e5a26 [PATCH] Don't export machine_restart, machine_halt, or machine_power_off.
machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with.  Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:42 -07:00
Ian Wienand 46906c4415 [IA64] Fix undefined reference to can_cpei_retarget for simulator
The simulator build doesn't turn on ACPI, so doesn't have a definition
of can_cpei_retarget.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-14 09:21:47 -07:00
Tony Luck 99ad25a313 Auto merge with /home/aegl/GIT/linus 2005-07-13 12:15:43 -07:00
Dean Nelson 59a0a8aa6a [IA64] fix call of smp_processor_id() by XPC while
XPC calls smp_processor_id() twice from xpc_setup_infrastructure() with
preemption enabled, which gets flagged if 'DEBUG_PREEMPT=y'. This patch
replaces the two calls to smp_processor_id() by a single call to
raw_smp_processor_id() since any CPU within the partition will do.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-13 11:52:45 -07:00
Christoph Lameter 7c2a6c62c0 [IA64] Altix pcibus_to_node implementation
The Altix subarch does not provide node information via ACPI. Instead hooks
are used to fixup pci structures. This patch determines the nodes for Altix
PCI busses.

Remote Bridges:
---------------
Altix supports remote I/O nodes without memory or processors but with bridges.
The TIOCA type of bridge is an AGP bridge and the PROM provides information
about the closest node. That information will be returned by pcibus_to_node.

The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a
closest node id. pcibus_to_node will return -1 for devices on those bridges
meaning that device control structures may be allocated on any node.

Safeguard:
----------
Should the fixups result in invalid node information for a pci controller then
a warning will be printed and pcibus_to_node will return -1.


This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that
dma_alloc_coherent will now use alloc_pages_node to allocate memory local to
the node that the PCI device is connected to.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 16:12:55 -07:00
Zoltan Menyhart 08357f82d4 [IA64] improve flush_icache_range()
Check with PAL to see what the i-cache line size is for
each level of the cache, and so use the correct stride
when flushing the cache.

Acked-by: David Mosberger
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12 15:33:18 -07:00
Len Brown 5028770a42 [ACPI] merge acpi-2.6.12 branch into latest Linux 2.6.13-rc...
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 17:21:56 -04:00