The code tests the dma address which legitimately can be 0.
The code should test the kernel logical address to avoid leaking eager
buffer allocations that happen to map to a dma address of 0.
Fixes: 60368186fd ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled")
Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following sparse warning:
drivers/infiniband/hw/bnxt_re/qplib_fp.c:1260:26: sparse: warning: incorrect type in assignment (different base types)
Fixes: 0e938533d9 ("RDMA/bnxt_re: Remove dynamic pkey table")
Link: https://lore.kernel.org/r/20211205204537.14184-1-kamalheib1@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The struct member variable create_flags is assigned twice. Remove the
unnecessary assignment.
Fixes: ece9ca97cc ("RDMA/uverbs: Do not check the input length on create_cq/qp paths")
Link: https://lore.kernel.org/r/20211207064607.541695-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is more general for ARM device drivers to use the device attribute to
map PCI BAR spaces.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20211206133652.27476-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In 'pvrdma_uar_table_init()', the 'tbl->table' bitmap has just been
allocated, so no concurrent accesses can occur.
The other accesses to the 'tbl->table' bitmap are protected by the
'tbl->lock' spinlock, so no concurrent accesses can happen.
So prefer the non-atomic '__[set|clear]_bit()' functions to save a few
cycles.
Link: https://lore.kernel.org/r/271b0e2c316e2b4cf34ac6fbca0701edd2d882ec.1637870667.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With preemption enabled (CONFIG_DEBUG_PREEMPT=y), the following appeared
when rnbd client tries to map remote block device.
BUG: using smp_processor_id() in preemptible [00000000] code: bash/1733
caller is debug_smp_processor_id+0x17/0x20
CPU: 0 PID: 1733 Comm: bash Not tainted 5.16.0-rc1 #5
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x78
dump_stack+0x10/0x12
check_preemption_disabled+0xe4/0xf0
debug_smp_processor_id+0x17/0x20
rtrs_clt_update_all_stats+0x3b/0x70 [rtrs_client]
rtrs_clt_read_req+0xc3/0x380 [rtrs_client]
? rtrs_clt_init_req+0xe3/0x120 [rtrs_client]
rtrs_clt_request+0x1a7/0x320 [rtrs_client]
? 0xffffffffc0ab1000
send_usr_msg+0xbf/0x160 [rnbd_client]
? rnbd_clt_put_sess+0x60/0x60 [rnbd_client]
? send_usr_msg+0x160/0x160 [rnbd_client]
? sg_alloc_table+0x27/0xb0
? sg_zero_buffer+0xd0/0xd0
send_msg_sess_info+0xe9/0x180 [rnbd_client]
? rnbd_clt_put_sess+0x60/0x60 [rnbd_client]
? blk_mq_alloc_tag_set+0x2ef/0x370
rnbd_clt_map_device+0xba8/0xcd0 [rnbd_client]
? send_msg_open+0x200/0x200 [rnbd_client]
rnbd_clt_map_device_store+0x3e5/0x620 [rnbd_client
To supress the calltrace, let's call get_cpu_ptr/put_cpu_ptr pair in
rtrs_clt_update_rdma_stats to disable preemption when accessing per-cpu
variable.
While at it, let's make the similar change in rtrs_clt_update_wc_stats.
And for rtrs_clt_inc_failover_cnt, though it was only called inside rcu
section, but it still can be preempted in case CONFIG_PREEMPT_RCU is
enabled, so change it to {get,put}_cpu_ptr pair either.
Link: https://lore.kernel.org/r/20211128133501.38710-1-guoqing.jiang@linux.dev
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RoCE spec requires RoCE devices to support only the default pkey.
However the bnxt_re driver maintains a 0xFFFF entry pkey table and uses
only the first entry. Remove the pkey table and hard code a table of
length one hard wired with the default pkey.
Link: https://lore.kernel.org/r/20211125033615.483750-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the addrconf_addr_eui48() helper function to set the sys_image_guid,
Also make sure the GUID is valid EUI-64 identifier.
Link: https://lore.kernel.org/r/20211124102336.427637-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The type of min_latency is ktime_t, so use KTIME_MAX to initialize the
initial value.
Fixes: dc3b66a0ce ("RDMA/rtrs-clt: Add a minimum latency multipath policy")
Link: https://lore.kernel.org/r/20211124081040.19533-1-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Guoqing Jiang <Guoqing.Jiang@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The existing tests are a little hard to comprehend. Use
check_add_overflow() instead.
Fixes: 04ded16724 ("RDMA/cma: Verify private data length")
Link: https://lore.kernel.org/r/1637661978-18770-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid
some open-coded arithmetic in allocator arguments.
Using the 'zalloc' version of the allocator also saves a now useless
'bitmap_zero()' call.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
While at it, remove an extra space in a statement just a few lines above.
Link: https://lore.kernel.org/r/e396c4aa16cd8945d43877570a8f6d926cea555a.1637789139.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In 'mthca_buddy_init()', the 'buddy->bits[n]' bitmap has just been
allocated, so no concurrent accesses can occur.
The other accesses to the 'buddy->bits[n]' bitmap are protected by the
'buddy->lock' spinlock, so no concurrent accesses can occur.
So prefer the non-atomic '__[set|clear]_bit()' functions to save a few
cycles.
Link: https://lore.kernel.org/r/a19b88ccdbc03972fd97306b998731814283041f.1637785902.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid
some open-coded arithmetic in allocator arguments.
Using the 'zalloc' version of the allocator also saves a now useless
'bitmap_zero()' call.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Link: https://lore.kernel.org/r/ea9031e28f453bc179033740f66f0c19293fcf0b.1637785902.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When hns_roce_v2_destroy_qp() is called, the brief calling process of the
driver is as follows:
......
hns_roce_v2_destroy_qp
hns_roce_v2_qp_modify
hns_roce_cmd_mbox
hns_roce_qp_destroy
If hns_roce_cmd_mbox() detects that the hardware is being reset during the
execution of the hns_roce_cmd_mbox(), the driver will not be able to get
the return value from the hardware (the firmware cannot respond to the
driver's mailbox during the hardware reset phase).
The driver needs to wait for the hardware reset to complete before
continuing to execute hns_roce_qp_destroy(), otherwise it may happen that
the driver releases the resources but the hardware is still accessing. In
order to fix this problem, HNS RoCE needs to add a piece of code to wait
for the hardware reset to complete.
The original interface get_hw_reset_stat() is the instantaneous state of
the hardware reset, which cannot accurately reflect whether the hardware
reset is completed, so it needs to be replaced with the ae_dev_reset_cnt
interface.
The sign that the hardware reset is complete is that the return value of
the ae_dev_reset_cnt interface is greater than the original value
reset_cnt recorded by the driver.
Fixes: 6a04aed6af ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Link: https://lore.kernel.org/r/20211123142402.26936-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
is_reset is used to indicate whether the hardware starts to reset. When
hns_roce_hw_v2_reset_notify_down() is called, the hardware has not yet
started to reset. If is_reset is set at this time, all mailbox operations
of resource destroy actions will be intercepted by driver. When the driver
cleans up resources, but the hardware is still accessed, the following
errors will appear:
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000003f
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0800
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043e
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0800
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000020880000436
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50a0880
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000043a
arm-smmu-v3 arm-smmu-v3.2.auto: 0x00000000a50e0840
hns3 0000:35:00.0: INT status: CMDQ(0x0) HW errors(0x0) other(0x0)
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
hns3 0000:35:00.0: received unknown or unhandled event of vector0
arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000350100000010
{34}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7
is_reset will be set correctly in check_aedev_reset_status(), so the
setting in hns_roce_hw_v2_reset_notify_down() should be deleted.
Fixes: 726be12f5c ("RDMA/hns: Set reset flag when hw resetting")
Link: https://lore.kernel.org/r/20211123084809.37318-1-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For the case of IB_MR_TYPE_DM the mr does doesn't have a umem, even though
it is a user MR. This causes function mlx5_free_priv_descs() to think that
it is a kernel MR, leading to wrongly accessing mr->descs that will get
wrong values in the union which leads to attempt to release resources that
were not allocated in the first place.
For example:
DMA-API: mlx5_core 0000:08:00.1: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=0 bytes]
WARNING: CPU: 8 PID: 1021 at kernel/dma/debug.c:961 check_unmap+0x54f/0x8b0
RIP: 0010:check_unmap+0x54f/0x8b0
Call Trace:
debug_dma_unmap_page+0x57/0x60
mlx5_free_priv_descs+0x57/0x70 [mlx5_ib]
mlx5_ib_dereg_mr+0x1fb/0x3d0 [mlx5_ib]
ib_dereg_mr_user+0x60/0x140 [ib_core]
uverbs_destroy_uobject+0x59/0x210 [ib_uverbs]
uobj_destroy+0x3f/0x80 [ib_uverbs]
ib_uverbs_cmd_verbs+0x435/0xd10 [ib_uverbs]
? uverbs_finalize_object+0x50/0x50 [ib_uverbs]
? lock_acquire+0xc4/0x2e0
? lock_acquired+0x12/0x380
? lock_acquire+0xc4/0x2e0
? lock_acquire+0xc4/0x2e0
? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs]
? lock_release+0x28a/0x400
ib_uverbs_ioctl+0xc0/0x140 [ib_uverbs]
? ib_uverbs_ioctl+0x7c/0x140 [ib_uverbs]
__x64_sys_ioctl+0x7f/0xb0
do_syscall_64+0x38/0x90
Fix it by reorganizing the dereg flow and mlx5_ib_mr structure:
- Move the ib_umem field into the user MRs structure in the union as it's
applicable only there.
- Function mlx5_ib_dereg_mr() will now call mlx5_free_priv_descs() only
in case there isn't udata, which indicates that this isn't a user MR.
Fixes: f18ec42231 ("RDMA/mlx5: Use a union inside mlx5_ib_mr")
Link: https://lore.kernel.org/r/66bb1dd253c1fd7ceaa9fc411061eefa457b86fb.1637581144.git.leonro@nvidia.com
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On error handling path in rxe_qp_from_init() qp->sq.queue is freed and
then rxe_create_qp() will drop last reference to this object. qp clean up
function will try to free this queue one time and it causes UAF bug.
Fix it by zeroing queue pointer after freeing queue in rxe_qp_from_init().
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/20211121202239.3129-1-paskripkin@gmail.com
Reported-by: syzbot+aab53008a5adf26abe91@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set the RDMA protocol to use at driver bind time based on the ice PF's
rdma_mode flag.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Each member of Array[][] should be initialized on a separate line.
Link: https://lore.kernel.org/r/20211119140208.40416-7-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The type of the variable participating in the shift operation should be an
unsigned type instead of a signed type.
Link: https://lore.kernel.org/r/20211119140208.40416-5-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There should be a space between the code and the comment on the right.
Link: https://lore.kernel.org/r/20211119140208.40416-4-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The print format should be consistent with the variable type.
Link: https://lore.kernel.org/r/20211119140208.40416-3-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hex printf format should be "0xff" instead of "ff".
Link: https://lore.kernel.org/r/20211119140208.40416-2-liangwenpeng@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RXE_POOL_ALIGN is only used in rxe_pool.c so move RXE_POOL_ALIGN to
rxe_pool.c from rxe_pool.h. RXE_POOL_CACHE_FLAGS is never used so it is
deleted from rxe_pool.h
Link: https://lore.kernel.org/r/20211103050241.61293-8-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_pool.c currently there are many cases where it is necessary to
compute the offset from a pool element struct to the object containing it
in a type independent way where the offset is different for each type. By
saving a pointer to the object when they are created extra work can be
saved.
Link: https://lore.kernel.org/r/20211103050241.61293-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_pool.c copy remaining pool setup parameters from rxe_pool_info into
rxe_pool. This saves looking up rxe_pool_info in the performance path.
Link: https://lore.kernel.org/r/20211103050241.61293-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently three different names are used to describe rxe pool elements.
They are referred to as entries, elems or pelems. This patch chooses one
'elem' and changes the other ones.
Link: https://lore.kernel.org/r/20211103050241.61293-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Most of the locks in the rxe driver are _irqsave/restore locks but in fact
there are no interrupt threads that run rxe code or share data with
rxe. There are softirq threads and data sharing so the appropriate lock
type is _bh. This patch replaces all irqsave type locks with bh type
locks.
Link: https://lore.kernel.org/r/20211103050241.61293-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the unnecessary "umem_pd" variable. And usnic_uiom_alloc_pd()
never returns NULL so remove the NULL check.
Link: https://lore.kernel.org/r/20211118113924.GH1147@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the addrconf_addr_eui48() helper function to set the GUIDs, Also make
sure the GUIDs are valid EUI-64 identifiers.
Link: https://lore.kernel.org/r/20211118100456.45423-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'cmdq->cmdq_bitmap' bitmap is 'rcfw->cmdq_depth' bits long. The size
stored in 'cmdq->bmap_size' is the size of the bitmap in bytes.
Remove this erroneous 'bmap_size' and use 'rcfw->cmdq_depth' directly in
'bnxt_qplib_disable_rcfw_channel()'. Otherwise some error messages may be
missing.
Other uses of 'cmdq_bitmap' already take into account 'rcfw->cmdq_depth'
directly.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/47ed717c3070a1d0f53e7b4c768a4fd11caf365d.1636707421.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the addrconf_addr_eui48() helper function to set the GUIDs for both
RoCE and iWARP modes, Also make sure the GUIDs are valid EUI-64
identifiers.
Link: https://lore.kernel.org/r/20211107212227.44610-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When optional counter support was added the allocation of the memory
holding the counter descriptors was not cleared properly. This caused
WARN_ON()s in the IB/sysfs code to be hit.
This is because the uninitialized memory made some of the counters wrongly
look like optional counters. Use kzalloc.
While here change the sizeof() calls to use the pointer rather than the
name of the type.
WARNING: CPU: 0 PID: 32644 at drivers/infiniband/core/sysfs.c:1064 ib_setup_port_attrs+0x7e1/0x890 [ib_core]
CPU: 0 PID: 32644 Comm: kworker/0:2 Tainted: G S W 5.15.0+ #36
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
Workqueue: events work_for_cpu_fn
RIP: 0010:ib_setup_port_attrs+0x7e1/0x890 [ib_core]
RSP: 0018:ffffc90006ea3c40 EFLAGS: 00010202
RAX: 0000000000000068 RBX: ffff888106ad8000 RCX: 0000000000000138
RDX: ffff888126c84c00 RSI: ffff888103c41000 RDI: 0000000000000124
RBP: ffff88810f63a801 R08: ffff888126c8a000 R09: 0000000000000001
R10: ffffffffa09acf20 R11: 0000000000000065 R12: ffff88810f63a800
R13: ffff88810f63a800 R14: ffff88810f63a8e0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff888667a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005590102cb078 CR3: 000000000240a003 CR4: 00000000001706f0
Call Trace:
ib_register_device.cold.44+0x23e/0x2d0 [ib_core]
rvt_register_device+0xfa/0x230 [rdmavt]
hfi1_register_ib_device+0x623/0x690 [hfi1]
init_one.cold.36+0x2d1/0x49b [hfi1]
local_pci_probe+0x45/0x80
work_for_cpu_fn+0x16/0x20
process_one_work+0x1b1/0x360
worker_thread+0x1d4/0x3a0
kthread+0x11a/0x140
ret_from_fork+0x22/0x30
Fixes: 5e2ddd1e59 ("RDMA/counter: Add optional counter support")
Link: https://lore.kernel.org/r/20211115200913.124104.47770.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Preset both receive and send CQ pointers prior to call to the drivers and
overwrite it later again till the mlx4 is going to be changed do not
overwrite ibqp properties.
This change is needed for mlx5, because in case of QP creation failure, it
will go to the path of QP destroy which relies on proper CQ pointers.
BUG: KASAN: use-after-free in create_qp.cold+0x164/0x16e [mlx5_ib]
Write of size 8 at addr ffff8880064c55c0 by task a.out/246
CPU: 0 PID: 246 Comm: a.out Not tainted 5.15.0+ #291
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
create_qp.cold+0x164/0x16e [mlx5_ib]
mlx5_ib_create_qp+0x358/0x28a0 [mlx5_ib]
create_qp.part.0+0x45b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 246:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0xa4/0xd0
create_qp.part.0+0x92/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 246:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x10c/0x150
slab_free_freelist_hook+0xb4/0x1b0
kfree+0xe7/0x2a0
create_qp.part.0+0x52b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2dbb2e2cbb1efb188a500e5634be1d71956424ce.1636631035.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
A typical collection of patches this cycle, mostly fixing with a few new
features:
- Fixes from static tools. clang warnings, dead code, unused variable,
coccinelle sweeps, etc
- Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1, mlx5,
irdma, qedr
- rtrs ULP bug fixes an improvments
- Additional counters for bnxt_re
- Support verbs CQ notifications in EFA
- Continued reworking and fixing of rxe
- netlink control to enable/disable optional device counters
- rxe now can use AH objects for its UD path, fixing various bugs in the
process
- Add DMABUF support to EFA
-----BEGIN PGP SIGNATURE-----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=CxD0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A typical collection of patches this cycle, mostly fixing with a few
new features:
- Fixes from static tools. clang warnings, dead code, unused
variable, coccinelle sweeps, etc
- Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1,
mlx5, irdma, qedr
- rtrs ULP bug fixes an improvments
- Additional counters for bnxt_re
- Support verbs CQ notifications in EFA
- Continued reworking and fixing of rxe
- netlink control to enable/disable optional device counters
- rxe now can use AH objects for its UD path, fixing various bugs in
the process
- Add DMABUF support to EFA"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (103 commits)
RDMA/core: Require the driver to set the IOVA correctly during rereg_mr
RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback
RDMA/irdma: optimize rx path by removing unnecessary copy
RDMA/qed: Use helper function to set GUIDs
RDMA/hns: Use the core code to manage the fixed mmap entries
IB/opa_vnic: Rebranding of OPA VNIC driver to Cornelis Networks
IB/qib: Rebranding of qib driver to Cornelis Networks
IB/hfi1: Rebranding of hfi1 driver to Cornelis Networks
RDMA/bnxt_re: Use helper function to set GUIDs
RDMA/bnxt_re: Fix kernel panic when trying to access bnxt_re_stat_descs
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
RDMA/hns: Fix initial arm_st of CQ
RDMA/rxe: Make rxe_type_info static const
RDMA/rxe: Use 'bitmap_zalloc()' when applicable
RDMA/rxe: Save a few bytes from struct rxe_pool
RDMA/irdma: Remove the unused variable local_qp
RDMA/core: Fix missed initialization of rdma_hw_stats::lock
RDMA/efa: Add support for dmabuf memory regions
RDMA/umem: Allow pinned dmabuf umem usage
...
If the driver returns a new MR during rereg it has to fill it with the
IOVA from the proper source. If IB_MR_REREG_TRANS is set then the IOVA is
cmd.hca_va, otherwise the IOVA comes from the old MR. mlx5 for example has
two calls inside rereg_mr:
return create_real_mr(new_pd, umem, mr->ibmr.iova,
new_access_flags);
and
return create_real_mr(new_pd, new_umem, iova, new_access_flags);
Unconditionally overwriting the iova in the newly allocated MR will
corrupt the iova if the first path is used.
Remove the redundant initializations from ib_uverbs_rereg_mr().
Fixes: 6e0954b11c ("RDMA/uverbs: Allow drivers to create a new HW object during rereg_mr")
Link: https://lore.kernel.org/r/4b0a31bbc372842613286a10d7a8cbb0ee6069c7.1635400472.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to return always zero for function which is not
supported, especially since 0 is the wrong return code.
Link: https://lore.kernel.org/r/20211102073054.410838-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Patches held over for a possible rc8.
* for-rc:
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
RDMA/hns: Fix initial arm_st of CQ
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF/AjYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1hkIAJ6sFDbvb4M4LMwf
Slh2NVL9o5sLMBDzVwnVlyMSKDbMn1WBKreGssaLgZjGDc74lxsdSmw5l9MZm0JN
xlq95Q6XFiuu+0qDHPWwfDz3JFO4TqW2ZLLPWk9NnkNbRXqccSrlVRi1RpgE1t3/
NUtS8CQLu6A2BYMc6mkk3aV6IwSNKOkWbM5eBHSvU4j8B6lLbNQop0AfO/wyY1xB
U6LiVE1RpN/b7Yv+75ITtNzuHzVIBx6305FvSnOlKbMKKvIClt96Vd2OeuoEkK+6
wGU8JraB1+fc0GckAhynNrjWQWdvi0MAhFWWEJxjS20OGcV1rXDduNfkVNauO1Zn
+dNyJ3s=
=g9fz
-----END PGP SIGNATURE-----
Merge tag 'v5.15' into rdma.git for-next
Pull in the accepted for-rc patches as the next merge needs a newer base.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the function irdma_post_recv, the function irdma_copy_sg_list is
not needed since the struct irdma_sge and ib_sge have the similar
member variables. The struct irdma_sge can be replaced with the
struct ib_sge totally.
This can increase the rx performance of irdma.
Link: https://lore.kernel.org/r/20211030104226.253346-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new implementation for mmap by using the new mmap entry API. This
makes way for further use of the dynamic mmap allocator in this driver.
Link: https://lore.kernel.org/r/20211028105640.1056-1-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The upper limit of MAX_LP_MSG_LEN on HIP08 is 64K, and the upper limit on
HIP09 is 16K. Regardless of whether it is HIP08 or HIP09, only 16K will be
used. In order to ensure compatibility, it is unified to 16K.
Setting MAX_LP_MSG_LEN to 16K will not cause performance loss on HIP08.
Fixes: fbed9d2be2 ("RDMA/hns: Fix configuration of ack_req_freq in QPC")
Link: https://lore.kernel.org/r/20211029100537.27299-1-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We set the init CQ status to ARMED before. As a result, an unexpected CEQE
would be reported. Therefore, the init CQ status should be set to no_armed
rather than REG_NXT_CEQE.
Fixes: a5073d6054 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/20211029095846.26732-1-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make struct rxe_type_info static const and local to the only uses. Moves
a bit of data to text.
$ size drivers/infiniband/sw/rxe/rxe_pool.o* (defconfig w/ infiniband swe)
text data bss dec hex filename
4456 12 0 4468 1174 drivers/infiniband/sw/rxe/rxe_pool.o.new
3817 652 0 4469 1175 drivers/infiniband/sw/rxe/rxe_pool.o.old
Link: https://lore.kernel.org/r/166b715d71f98336e8ecab72b0dbdd266eee9193.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'index.table' is a bitmap. So use 'bitmap_zalloc()' to simplify code,
improve the semantic and avoid some open-coded arithmetic in allocator
arguments.
Using 'bitmap_zalloc()' also allows the removal of a now useless
'bitmap_zero()'.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Link: https://lore.kernel.org/r/4a3e11d45865678d570333d1962820eb13168848.1635093628.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the member variable local_qp is not used, remove it.
Link: https://lore.kernel.org/r/20211027175457.201822-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
alloc_and_bind() creates a new rdma_hw_stats structure but misses
initializing the mutex lock.
This causes debug kernel failures:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 4 PID: 64464 at kernel/locking/mutex.c:575 __mutex_lock+0x9c3/0x12b0
Call Trace:
fill_res_counter_entry+0x6ee/0x1020 [ib_core]
res_get_common_dumpit+0x907/0x10a0 [ib_core]
nldev_stat_get_dumpit+0x20a/0x290 [ib_core]
netlink_dump+0x451/0x1040
__netlink_dump_start+0x583/0x830
rdma_nl_rcv_msg+0x3f3/0x7c0 [ib_core]
rdma_nl_rcv+0x264/0x410 [ib_core]
netlink_unicast+0x433/0x700
netlink_sendmsg+0x707/0xbf0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Instead of requiring all users to open code initialization of the lock put
it in the general rdma_alloc_hw_stats_struct() function and remove
duplicates.
Fixes: c4ffee7c9b ("RDMA/netlink: Implement counter dumpit calback")
Link: https://lore.kernel.org/r/4a22986c4685058d2c735d91703ee7d865815bb9.1635237668.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement a dmabuf importer for the EFA driver. As ODP is not supported,
the pinned dmabuf are used to prevent the move_notify callback from being
called.
Link: https://lore.kernel.org/r/20211012120903.96933-4-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce ib_umem_dmabuf_get_pinned() which allows the driver to get a
dmabuf umem which is pinned and does not require move_notify callback
implementation.
The returned umem is pinned and DMA mapped like standard cpu umems, and is
released through ib_umem_release() (incl. unpinning and unmapping).
Link: https://lore.kernel.org/r/20211012120903.96933-3-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to return always zero for function which is not
supported, especially since 0 is the wrong return code.
Fixes: a7efd7773e ("qedr: Add support for PD,PKEY and CQ verbs")
Link: https://lore.kernel.org/r/20211025062632.3960-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The spin lock in struct irdma_qp_uk is not used. So remove it.
Link: https://lore.kernel.org/r/20211021230612.153812-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
netdev->dev_addr will become const soon, make sure drivers propagate the
qualifier.
Link: https://lore.kernel.org/r/20211019182604.1441387-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 406f42fa0d ("net-next: When a bond have a massive amount of
VLANs...") introduced a rbtree for faster Ethernet address look up. To
maintain netdev->dev_addr in this tree we need to make all the writes to
it got through appropriate helpers.
Link: https://lore.kernel.org/r/20211019182604.1441387-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx5_ib_fs_add_op_fc/mlx5_ib_fs_remove_op_fc functions are only
available when user access is enabled, without that we run into a link
error:
ERROR: modpost: "mlx5_ib_fs_add_op_fc" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined!
ERROR: modpost: "mlx5_ib_fs_remove_op_fc" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined!
Conditionally compiling the newly added code section makes it build,
though this is probably not a correct fix.
Fixes: a29b934ceb ("RDMA/mlx5: Add modify_op_stat() support")
Link: https://lore.kernel.org/r/20211019061602.3062196-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to better track where in the kernel the dma-buf code is used,
put the symbols in the namespace DMA_BUF and modify all users of the
symbols to properly import the namespace to not break the build at the
same time.
Now the output of modinfo shows the use of these symbols, making it
easier to watch for users over time:
$ modinfo drivers/misc/fastrpc.ko | grep import
import_ns: DMA_BUF
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.
* branch 'mlx5_mkey':
RDMA/mlx5: Attach ndescs to mlx5_ib_mkey
RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib
RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key
RDMA/mlx5: Remove pd from struct mlx5_core_mkey
RDMA/mlx5: Remove size from struct mlx5_core_mkey
RDMA/mlx5: Remove iova from struct mlx5_core_mkey
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The 'struct attribute' flex array contains some struct lock_class_key's
which become big when lockdep is turned on. Big enough that some drivers
will not load when CONFIG_PROVE_LOCKING=y because they cannot allocate
enough memory:
WARNING: CPU: 36 PID: 8 at mm/page_alloc.c:5350 __alloc_pages+0x27e/0x3e0
Call Trace:
kmalloc_order+0x2a/0xb0
kmalloc_order_trace+0x19/0xf0
__kmalloc+0x231/0x270
ib_setup_port_attrs+0xd8/0x870 [ib_core]
ib_register_device+0x419/0x4e0 [ib_core]
bnxt_re_task+0x208/0x2d0 [bnxt_re]
Link: https://lore.kernel.org/r/20211019002656.17745-1-wangyugui@e16-tech.com
Signed-off-by: wangyugui <wangyugui@e16-tech.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_uk_cq_init always returns 0, so make it void and delete
all the return value checks.
Link: https://lore.kernel.org/r/20211019153717.3836-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When irdma_ws_add fails, irdma_ws_remove is used to cleanup the leaf node.
This lead to holding the qos mutex twice in the QP resume path. Fix this
by avoiding the call to irdma_ws_remove and unwinding the error in
irdma_ws_add. This skips the call to irdma_tc_in_use function which is not
needed in the error unwind cases.
Fixes: 3ae331c751 ("RDMA/irdma: Add QoS definitions")
Link: https://lore.kernel.org/r/20211019151654.1943-2-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently VLAN is reported in UD work completion when VLAN id is zero,
i.e. no VLAN case.
Report VLAN in UD work completion only when VLAN id is non-zero.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20211019151654.1943-1-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Device's QP memory should only be allocated and released by IB layer.
This patch removes the redundant release of the device's qp memory and
uses completion APIs to make sure that .destroy_qp() only return, when qp
reference becomes 0.
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/20211019082212.7052-1-pkushwaha@marvell.com
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A small series to clean up the mlx5 mkey code across the mlx5_core and
InfiniBand.
* branch 'mlx5_mkey':
RDMA/mlx5: Attach ndescs to mlx5_ib_mkey
RDMA/mlx5: Move struct mlx5_core_mkey to mlx5_ib
RDMA/mlx5: Replace struct mlx5_core_mkey by u32 key
RDMA/mlx5: Remove pd from struct mlx5_core_mkey
RDMA/mlx5: Remove size from struct mlx5_core_mkey
RDMA/mlx5: Remove iova from struct mlx5_core_mkey
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Generalize the use of ndescs by adding it to mlx5_ib_mkey.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Move mlx5_core_mkey struct to mlx5_ib, as the mlx5_core doesn't use it
at this point.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
In mlx5_core and vdpa there is no use of mlx5_core_mkey members except
for the key itself.
As preparation for moving mlx5_core_mkey to mlx5_ib, the occurrences of
struct mlx5_core_mkey in all modules except for mlx5_ib are replaced by
a u32 key.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
There is no read of mkey->pd, only write. Remove it.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
mkey->size is already stored in ibmr->length, no need to store it here.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
iova is already stored in ibmr->iova, no need to store it here.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
struct device supports attribute groups directly but does not support
struct device_attribute directly. Hence switch to attribute groups.
Link: https://lore.kernel.org/r/20211012233558.4066756-5-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.
Link: https://lore.kernel.org/r/20211007202923.2174984-6-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Return negative -ENOMEM instead of positive ENOMEM. Returning a postive
value will cause an Oops because it becomes an ERR_PTR() in the
create_qp() function.
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/20211013080645.GD6010@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sc_disable() after having disabled the send context wakes up any waiters
by calling hfi1_qp_wakeup() while holding the waitlock for the sc.
This is contrary to the model for all other calls to hfi1_qp_wakeup()
where the waitlock is dropped and a local is used to drive calls to
hfi1_qp_wakeup().
Fix by moving the sc->piowait into a local list and driving the wakeup
calls from the list.
Fixes: 099a884ba4 ("IB/hfi1: Handle wakeup of orphaned QPs for pio")
Link: https://lore.kernel.org/r/20211013141852.128104.2682.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Overflowing either addrlimit or bytes_togo can allow userspace to trigger
a buffer overflow of kernel memory. Check for overflows in all the places
doing math on user controlled buffers.
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Link: https://lore.kernel.org/r/20211012175519.7298.77738.stgit@awfm-01.cornelisnetworks.com
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add code to rxe_get_av in rxe_av.c to use the AH index in UD send WQEs to
lookup the kernel AH. For old user providers continue to use the AV passed
in WQEs. Move setting pkt->rxe to before the call to rxe_get_av() to get
access to the AH pool.
Link: https://lore.kernel.org/r/20211007204051.10086-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pd field in struct rxe_ah is redundant with the pd field in the
rdma-core's ib_ah. Eliminate the pd field in rxe_ah and add an inline to
extract the pd from the ibah field.
Link: https://lore.kernel.org/r/20211007204051.10086-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make changes to rdma_user_rxe.h to allow indexing AH objects, passing the
index in UD send WRs to the driver and returning the index to the rxe
provider.
Modify rxe_create_ah() to add an index to AH when created and if called
from a new user provider return it to user space. If called from an old
provider mark the AH as not having a useful index. Modify rxe_destroy_ah
to drop the index before deleting the object.
Link: https://lore.kernel.org/r/20211007204051.10086-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make changes to rxe_param.h and rxe_pool.c to allow indexing of AH
objects. Valid indices are non-zero so older providers can be detected.
Link: https://lore.kernel.org/r/20211007204051.10086-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the struct rxe_av av from struct rxe_send_wqe to struct rxe_send_wr
placing it in wr.ud at the same offset as it was previously. This has the
effect of increasing the size of struct rxe_send_wr while keeping the size
of struct rxe_send_wqe the same. This better reflects the use of this
field which is only used for UD sends. This change has no effect on ABI
compatibility so the modified rxe driver will operate with older versions
of rdma-core.
Link: https://lore.kernel.org/r/20211007204051.10086-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.
Fixes: c1c9850112 ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_cqp_up_map_cmd() is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-5-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_get_hw_addr() is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_sc_send_lsmm_nostag is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_uk_mw_bind is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-2-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Link: https://lore.kernel.org/r/ca7bac6e6c9c5cc8d04eec3944edb13de0e381a3.1633874776.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pointer err_str is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.
Link: https://lore.kernel.org/r/20211007173942.21933-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replacing kmalloc/kfree/dma_map_single/dma_unmap_single() with
dma_alloc_coherent/dma_free_coherent() helps to reduce code size, and
simplify the code, and coherent DMA will not clear the cache every time.
The SOC that this driver supports does not have incoherent DMA, so this
makes the code follow the DMA API properly with no performance
impact. Currently there are missing dma sync calls around the DMA
transfers.
Link: https://lore.kernel.org/r/20210926061116.282-1-caihuoqing@baidu.com
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Wenpeng Liang <liangwenpeng@huawei.com>
Tested-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When get_hw_stats is called, query and return the optional counter
statistic as well.
Link: https://lore.kernel.org/r/20211008122439.166063-14-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support for ib callback modify_op_stat() to add or remove an optional
counter. When adding, a steering flow table is created with a rule that
catches and counts all the matching packets. When removing, the table and
flow counter are destroyed.
Link: https://lore.kernel.org/r/20211008122439.166063-13-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Adding steering infrastructure for adding and removing optional counter.
This allows to add and remove the counters dynamically in order not to
hurt performance.
Link: https://lore.kernel.org/r/20211008122439.166063-12-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add optional counter support when allocate and initialize hw_stats
structure. Optional counters have IB_STAT_FLAG_OPTIONAL flag set and are
disabled by default.
Link: https://lore.kernel.org/r/20211008122439.166063-11-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Provide an option to allow users to enable/disable optional counters
through RDMA netlink. Limiting it to users with ADMIN capability only.
Examples:
1. Enable optional counters cc_rx_ce_pkts and cc_rx_cnp_pkts (and
disable all others):
$ sudo rdma statistic set link rocep8s0f0/1 optional-counters \
cc_rx_ce_pkts,cc_rx_cnp_pkts
2. Remove all optional counters:
$ sudo rdma statistic unset link rocep8s0f0/1 optional-counters
Link: https://lore.kernel.org/r/20211008122439.166063-10-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to allow expansion of the set command with more set options, take
the set mode out of the main set function.
Link: https://lore.kernel.org/r/20211008122439.166063-9-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch adds the ability to get the name, index and status of all
counters for each link through RDMA netlink. This can be used for
user-space to get the current optional-counter mode.
Examples:
$ rdma statistic mode
link rocep8s0f0/1 optional-counters cc_rx_ce_pkts
$ rdma statistic mode supported
link rocep8s0f0/1 supported optional-counters cc_rx_ce_pkts,cc_rx_cnp_pkts,cc_tx_cnp_pkts
link rocep8s0f1/1 supported optional-counters cc_rx_ce_pkts,cc_rx_cnp_pkts,cc_tx_cnp_pkts
Link: https://lore.kernel.org/r/20211008122439.166063-8-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An optional counter is a driver-specific counter that may be dynamically
enabled/disabled. This enhancement allows drivers to expose counters
which are, for example, mutually exclusive and cannot be enabled at the
same time, counters that might degrades performance, optional debug
counters, etc.
Optional counters are marked with IB_STAT_FLAG_OPTIONAL flag. They are not
exported in sysfs, and must be at the end of all stats, otherwise the
attr->show() in sysfs would get wrong indexes for hwcounters that are
behind optional counters.
Link: https://lore.kernel.org/r/20211008122439.166063-7-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a bitmap in rdma_hw_stat structure, with each bit indicates whether
the corresponding counter is currently disabled or not. By default
hwcounters are enabled.
Link: https://lore.kernel.org/r/20211008122439.166063-6-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new API rdma_free_hw_stats_struct to pair with
rdma_alloc_hw_stats_struct (which is also de-inlined).
This will be useful when there are more alloc/free works in following
patches.
Link: https://lore.kernel.org/r/20211008122439.166063-5-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a counter statistic descriptor structure in rdma_hw_stats. In addition
to the counter name, more meta-information will be added. This code
extension is needed for optional-counter support in the following patches.
Link: https://lore.kernel.org/r/20211008122439.166063-4-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch adds support for CQ notifications through the standard verbs
api.
In order to achieve that, a new event queue (EQ) object is introduced,
which is in charge of reporting completion events to the driver. On
driver load, EQs are allocated and their affinity is set to a single
cpu. When a user app creates a CQ with a completion channel, the
completion vector number is converted to a EQ number, which is in charge
of reporting the CQ events.
In addition, the CQ creation admin command now returns an offset for the
CQ doorbell, which is mapped to the userspace provider and is used to arm
the CQ when requested by the user.
The EQs use a single doorbell (located on the registers BAR), which
encodes the EQ number and arm as part of the doorbell value. The EQs are
polled by the driver on each new EQE, and arm it when the poll is
completed.
Link: https://lore.kernel.org/r/20211003105605.29222-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As ibv_poll_cq()'s manual said, only partial attributes are valid when
completion status != IBV_WC_SUCCESS.
Link: https://lore.kernel.org/r/20210930094813.226888-4-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The is_user members of struct rxe_sq/rxe_rq/rxe_srq are unsed since
commit ae6e843fe0 ("RDMA/rxe: Add memory barriers to kernel queues").
In this case, it is fine to remove them directly.
Link: https://lore.kernel.org/r/20210930094813.226888-2-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, the driver doesn't set the PCP-based priority for DCT, hence
DCT response packets are transmitted without user priority.
Fix it by setting user provided priority in the eth_prio field in the DCT
context, which in turn sets the value in the transmitted packet.
Fixes: 776a3906b6 ("IB/mlx5: Add support for DC target QP")
Link: https://lore.kernel.org/r/5fd2d94a13f5742d8803c218927322257d53205c.1633512672.git.leonro@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The valid bit for extended CQE's written by HW is retrieved from the
incorrect quad-word. This leads to missed completions for any UD traffic
particularly after a wrap-around.
Get the valid bit for extended CQE's from the correct quad-word in the
descriptor.
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Link: https://lore.kernel.org/r/20211005182302.374-1-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are a couple of subtle error path bugs related to mapping the sgls:
- In rdma_rw_ctx_init(), dma_unmap would be called with an sg that could
have been incremented from the original call, as well as an nents that
is the dma mapped entries not the original number of nents called when
mapped.
- Similarly in rdma_rw_ctx_signature_init, both sg and prot_sg were
unmapped with the incorrect number of nents.
To fix this, switch to the sgtable interface for mapping which
conveniently stores the original nents for unmapping. This will get
cleaned up further once the dma mapping interface supports P2PDMA and
pci_p2pdma_map_sg() can be removed.
Fixes: 0e353e34e1 ("IB/core: add RW API support for signature MRs")
Fixes: a060b5629a ("IB/core: generic RDMA READ/WRITE API")
Link: https://lore.kernel.org/r/20211001213215.3761-1-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx4_mac_to_u64() predates and opencodes ether_addr_to_u64().
It doesn't make the argument constant so it'll be problematic
when dev->dev_addr becomes a const. Convert to the generic helper.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Control IRQ is the first IRQ vector. This complicates handling of
completion irqs as we need to offset them by one.
in the next patch, there are scenarios where completion and control EQs
will share the same irq. for example: functions with single IRQ. To ease
such scenarios, we shift control IRQ to the end of the irq array.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, if a cache entry is empty, the driver will try to take MRs
from larger cache entries. This behavior consumes a lot of memory.
In addition, when searching for an mkey in an entry, the entry is locked.
When using a multithreaded application with the old behavior, the threads
will block each other more often, which can hurt performance as can be
seen in the table below.
Therefore, avoid it by creating a new mkey when the requested cache entry
is empty.
The test was performed on a machine with
Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz 44 cores.
Here are the time measures for allocating MRs of 2^6 pages. The search in
the cache started from entry 6.
+------------+---------------------+---------------------+
| | Old behavior | New behavior |
| +----------+----------+----------+----------+
| | 1 thread | 5 thread | 1 thread | 5 thread |
+============+==========+==========+==========+==========+
| 1,000 MRs | 14 ms | 30 ms | 14 ms | 80 ms |
+------------+----------+----------+----------+----------+
| 10,000 MRs | 135 ms | 6 sec | 173 ms | 880 ms |
+------------+----------+----------+----------+----------+
|100,000 MRs | 11.2 sec | 57 sec | 1.74 sec | 8.8 sec |
+------------+----------+----------+----------+----------+
Link: https://lore.kernel.org/r/71af2770c737b936f7b10f457f0ef303ffcf7ad7.1632644527.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This commit divides the sysfs entry cpu_migration into 2 different entries
One for "from cpus" and the other for "to cpus".
Link: https://lore.kernel.org/r/20210922125333.351454-8-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allowing these characters in sessname can lead to unexpected results,
particularly because / is used as a separator between files in a path, and
. points to the current directory.
Link: https://lore.kernel.org/r/20210922125333.351454-7-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The same code snip used twice, to avoid duplicate, replace it with a
destroy_cq helper.
Link: https://lore.kernel.org/r/20210922125333.351454-6-haris.iqbal@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
if (con->cid >= con->sess->irq_con_num) check can be replaced with a
is_pollqueue helper.
Link: https://lore.kernel.org/r/20210922125333.351454-5-haris.iqbal@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When testing with poll mode, it will fail and lead to warning below on
client side:
$ echo "sessname=bla path=gid:fe80::2:c903:4e:d0b3@gid:fe80::2:c903:8:ca17 device_path=/dev/nullb2 nr_poll_queues=-1" | \
sudo tee /sys/devices/virtual/rnbd-client/ctl/map_device
rnbd_client L597: Mapping device /dev/nullb2 on session bla, (access_mode: rw, nr_poll_queues: 8)
WARNING: CPU: 3 PID: 9886 at drivers/infiniband/core/cq.c:447 ib_cq_pool_get+0x26f/0x2a0 [ib_core]
The problem is in case of poll queue, we need to still call
ib_alloc_cq/ib_free_cq, we can't use cq_poll api for poll queue.
As both client and server use shared function from rtrs, set irq_con_num
to con_num on server side, which is number of total connection of the
session, this way we can differ if the rtrs_con requires pollqueue.
Following up patches will replace the duplicate code with helpers.
Link: https://lore.kernel.org/r/20210922125333.351454-4-haris.iqbal@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since we have changed all sysfs show functions to use sysfs_emit, we do
not require the len (PAGE_SIZE) in our helper print functions. So remove
it from the function parameter.
Link: https://lore.kernel.org/r/20210922125333.351454-3-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sysfs_emit function was added to be aware of the PAGE_SIZE maximum of the
temporary buffer used for outputting sysfs content, so there is no
possible overruns. So replace the uses of any s*printf functions for the
sysfs show functions with sysfs_emit.
Link: https://lore.kernel.org/r/20210922125333.351454-2-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Two list heads in the rdma_id_private are being used for multiple
purposes, to save a few bytes of memory. Give the different purposes
different names and union the memory that is clearly exclusive.
list splits into device_item and listen_any_item. device_item is threaded
onto the cma_device's list and listen_any goes onto the
listen_any_list. IDs doing any listen cannot have devices.
listen_list splits into listen_item and listen_list. listen_list is on the
parent listen any rdma_id_private and listen_item is on child listen that
is bound to a specific cma_dev.
Which name should be used in which case depends on the state and other
factors of the rdma_id_private. Remap all the confusing references to make
sense with the new names, so at least there is some hope of matching the
necessary preconditions with each access.
Link: https://lore.kernel.org/r/0-v1-a5ead4a0c19d+c3a-cma_list_head_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmFaG98eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGosAH/jqy5B2BIEE39O+8
QTr3vO54SyRRuY/d98wZ+O4SPjfqfpCHuyjKt9YJpEdmzH754NC9gSPOOBegnvHI
DfrWaivmJ5mdjN2h7+JVqjs58krUv98wWNa5xfvqUp5H7wF3WQg3AxsaMKS1PePD
kFHfeFbxsg2gYhyhPK6gHtwLn6dEsx9bGny2bKvCh6KuJQEiUXoEcgnFzjFgLNxp
T5zI1cNSCNUzwRIe+vqQRlfVR2JlSI4tiy0zNJWy9dQ5Z4HOSbFcEz5Df2N7qNYn
/MqruaASmyREgo9yLHpR1BSyzrea8MCckY04ycYqKZb7gDwcrpAe4QVw2I/Fuzu9
q//PV4I=
=+mYg
-----END PGP SIGNATURE-----
Merge tag 'v5.15-rc4' into rdma.get for-next
Merged due to dependencies in following patches.
Conflict in drivers/infiniband/hw/hfi1/ipoib_tx.c resolved by hand to take
the %p change and txq stats rename together.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In our internal testing we have found that default maximum values are too
small. Ideally there should be no limits, but since maximum values are
reported via ibv_query_device, we have to return some value. So, the
default maximums have been changed to large values.
Link: https://lore.kernel.org/r/20210915011220.307585-1-Rao.Shoaib@oracle.com
Signed-off-by: Rao Shoaib <Rao.Shoaib@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in
structures, functions, variables and defines in FW HSI (Hardware
Software Interface).
The new FW version introduced a generic naming convention in HSI
in-which the same code will be used across different versions
for simpler maintainability. It also eases in providing support for
new features.
With this patch every "_e4" or "e4_" prefix or suffix is not needed
anymore and it will be removed.
Reviewed-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error returns for various cases detected by get_prefetchable_mr() get
confused as it flows back to userspace. Properly label each error path and
flow the error code properly back to the system call.
Link: https://lore.kernel.org/r/20210928170846.GA1721590@nvidia.com
Suggested-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
This is short series for mlx5 from Meir that adds a DevX UID to the UAR.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* mellanox/mlx5-next:
IB/mlx5: Enable UAR to have DevX UID
net/mlx5: Add uid field to UAR allocation structures
UID field was added to alloc_uar and dealloc_uar PRM command, to specify
DevX UID for UAR. This change enables firmware validating user access to
its own UAR resources.
For the kernel allocated UARs the UID will stay 0 as of today.
Signed-off-by: Meir Lichtinger <meirl@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
1) Replace (RXE_READ_MASK | RXE_WRITE_MASK) with RXE_READ_OR_WRITE_MASK.
2) Change (RXE_READ_MASK | RXE_WRITE_OR_SEND) to RXE_READ_OR_WRITE_MASK
because we don't need to check RETH for RXE_SEND_MASK.
Link: https://lore.kernel.org/r/20210914080253.1145353-2-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make use of the struct_size() and flex_array_size() helpers instead of
open-coded versions, in order to avoid any potential type mistakes or
integer overflows that, in the worse scenario, could lead to heap
overflows.
Link: https://lore.kernel.org/r/20210927225333.GA192634@embeddedor
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These traces are used to debugging ring issues.
The ipoib_txreq needed to be moved to a header file to allow access from
the trace header file.
The trace changes include:
- new producer/consumer traces
- new allocation deallocation traces
- additional fidelity for SDMA engine prints
Fixes: 4bd00b55c9 ("IB/hfi1: Add AIP tx traces")
Link: https://lore.kernel.org/r/20210913132852.131370.9664.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The atomic is not needed.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210913132847.131370.54250.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch moves fields in the ring and creates a line for the producer
and the consumer.
The adds a consumer side variable that tracks the ring avail so that the
code doesn't have the read the other cacheline to get a count for every
packet. A read now only occurs when the avail is at 0.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210913132842.131370.15636.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The txq has the backpointer, so this is a micro optimization for the tx
path.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210913132836.131370.89704.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pointer math in this statemet does a divide;
struct hfi1_ipoib_txq *txq = &priv->txqs[napi - priv->tx_napis];
Elminate the divide by embedding the struct napi_strut in the txq and
getting the txq with a container_of() using the newly embedded napi.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210913132831.131370.3993.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch removes kmem cache allocation and deallocation in favor of
having the ipoib_txreq in the ring.
The consumer is now the packet sending side allocating tx descriptors from
ring and the producer is the napi interrupt handling freeing tx
descriptors.
The locks are now eliminated because the napi tx lock insures a single
consumer and the napi handling insures a single producer.
The napi poll is converted to memory poll looking for items that have been
marked completed.
Fixes: d99dc602e2 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20210913132826.131370.4397.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the CQE size of the user space is not the size supported by the
hardware, the creation of CQ should be stopped.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The size of CQE is different for different versions of hardware, so the
driver needs to specify the size of CQE explicitly.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pointers should be printed with %p or %px rather than cast to 'unsigned
long long' and printed with %llx. Change %llx to %p to print the secured
pointer.
Fixes: 042a00f93a ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev")
Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Usnic VF doesn't need lock in atomic context to create QPs, so it is safe
to use mutex instead of spinlock. Such change fixes the following smatch
error.
Smatch static checker warning:
lib/kobject.c:289 kobject_set_name_vargs()
warn: sleeping in atomic context
Fixes: 514aee660d ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2a0e295786c127e518ebee8bb7cafcb819a625f6.1631520231.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Local and remote invalidate operations are not allowed by IBA for MRs
created by (re)register memory verbs. This patch checks the MR type in
rxe_invalidate_mr().
Link: https://lore.kernel.org/r/20210914164206.19768-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For fast memory regions create duplicate mapping tables so ib_map_mr_sg()
can build a new mapping table which is then swapped into place
synchronously with the execution of an IB_WR_REG_MR work request.
Currently the rxe driver uses the same table for receiving RDMA operations
and for building new tables in preparation for reusing the MR. This
exposes users to potentially incorrect results.
Link: https://lore.kernel.org/r/20210914164206.19768-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Separate software and simulated hardware lkeys and rkeys for MRs and MWs.
This makes struct ib_mr and struct ib_mw isolated from hardware changes
triggered by executing work requests.
This change fixes a bug seen in blktest.
Link: https://lore.kernel.org/r/20210914164206.19768-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Eliminate RXE_MR_STATE_ZOMBIE which is not compatible with IBA.
RXE_MR_STATE_INVALID is better.
Replace RXE_MR_TYPE_XXX by IB_MR_TYPE_XXX which covers all the needed
types.
Link: https://lore.kernel.org/r/20210914164206.19768-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Earlier patches added memory barriers to protect user space to kernel
space communications. The user space queues were previously shown to have
occasional memory synchonization errors which were removed by adding
smp_load_acquire, smp_store_release barriers. This patch extends that to
the case where queues are used between kernel space threads.
This patch also extends the queue types to include kernel ULP queues which
access the other end of the queues in kernel verbs calls like poll_cq and
post_send/recv.
Link: https://lore.kernel.org/r/20210914164206.19768-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
gcc 8.3 and 5.4 throw this:
In function 'modify_qp_init_to_rtr',
././include/linux/compiler_types.h:322:38: error: call to '__compiletime_assert_1859' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
[..]
drivers/infiniband/hw/hns/hns_roce_common.h:91:52: note: in expansion of macro 'FIELD_PREP'
*((__le32 *)ptr + (field_h) / 32) |= cpu_to_le32(FIELD_PREP( \
^~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write'
#define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val)
^~~~~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4412:2: note: in expansion of macro 'hr_reg_write'
hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini);
Because gcc has miscalculated the constantness of lp_pktn_ini:
mtu = ib_mtu_enum_to_int(ib_mtu);
if (WARN_ON(mtu < 0)) [..]
lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu);
Since mtu is limited to {256,512,1024,2048,4096} lp_pktn_ini is between 4
and 8 which is compatible with the 4 bit field in the FIELD_PREP.
Work around this broken compiler by adding a 'can never be true'
constraint on lp_pktn_ini's value which clears out the problem.
Fixes: f0cb411aad ("RDMA/hns: Use new interface to modify QP context")
Link: https://lore.kernel.org/r/0-v1-c773ecb137bc+11f-hns_gcc8_jgg@nvidia.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The FSM can run in a circle allowing rdma_resolve_ip() to be called twice
on the same id_priv. While this cannot happen without going through the
work, it violates the invariant that the same address resolution
background request cannot be active twice.
CPU 1 CPU 2
rdma_resolve_addr():
RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY
rdma_resolve_ip(addr_handler) #1
process_one_req(): for #1
addr_handler():
RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND
mutex_unlock(&id_priv->handler_mutex);
[.. handler still running ..]
rdma_resolve_addr():
RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY
rdma_resolve_ip(addr_handler)
!! two requests are now on the req_list
rdma_destroy_id():
destroy_id_handler_unlock():
_destroy_id():
cma_cancel_operation():
rdma_addr_cancel()
// process_one_req() self removes it
spin_lock_bh(&lock);
cancel_delayed_work(&req->work);
if (!list_empty(&req->list)) == true
! rdma_addr_cancel() returns after process_on_req #1 is done
kfree(id_priv)
process_one_req(): for #2
addr_handler():
mutex_lock(&id_priv->handler_mutex);
!! Use after free on id_priv
rdma_addr_cancel() expects there to be one req on the list and only
cancels the first one. The self-removal behavior of the work only happens
after the handler has returned. This yields a situations where the
req_list can have two reqs for the same "handle" but rdma_addr_cancel()
only cancels the first one.
The second req remains active beyond rdma_destroy_id() and will
use-after-free id_priv once it inevitably triggers.
Fix this by remembering if the id_priv has called rdma_resolve_ip() and
always cancel before calling it again. This ensures the req_list never
gets more than one item in it and doesn't cost anything in the normal flow
that never uses this strange error path.
Link: https://lore.kernel.org/r/0-v1-3bc675b8006d+22-syz_cancel_uaf_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: e51060f08a ("IB: IP address based RDMA connection manager")
Reported-by: syzbot+dc3dfba010d7671e05f5@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the state is not idle then rdma_bind_addr() will immediately fail and
no change to global state should happen.
For instance if the state is already RDMA_CM_LISTEN then this will corrupt
the src_addr and would cause the test in cma_cancel_operation():
if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev)
To view a mangled src_addr, eg with a IPv6 loopback address but an IPv4
family, failing the test.
This would manifest as this trace from syzkaller:
BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26
Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204
CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
__list_add_valid+0x93/0xa0 lib/list_debug.c:26
__list_add include/linux/list.h:67 [inline]
list_add_tail include/linux/list.h:100 [inline]
cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline]
rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751
ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102
ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732
vfs_write+0x28e/0xa30 fs/read_write.c:603
ksys_write+0x1ee/0x250 fs/read_write.c:658
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Which is indicating that an rdma_id_private was destroyed without doing
cma_cancel_listens().
Instead of trying to re-use the src_addr memory to indirectly create an
any address build one explicitly on the stack and bind to that as any
other normal flow would do.
Link: https://lore.kernel.org/r/0-v1-9fbb33f5e201+2a-cma_listen_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 732d41c545 ("RDMA/cma: Make the locking for automatic state transition more clear")
Reported-by: syzbot+6bb0528b13611047209c@syzkaller.appspotmail.com
Tested-by: Hao Sun <sunhao.th@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the retry counter exceeds, as the remote QP didn't send any Ack or
Nack an asynchronous event (AE) for too many retries is generated. Add
code to handle the AE and set the correct IB WC error code
IB_WC_RETRY_EXC_ERR.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210916191222.824-4-shiraz.saleem@intel.com
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Due to duplicate reset flags, CQP commands are processed during reset.
This leads CQP failures such as below:
irdma0: [Delete Local MAC Entry Cmd Error][op_code=49] status=-27 waiting=1 completion_err=0 maj=0x0 min=0x0
Remove the redundant flag and set the correct reset flag so CPQ is paused
during reset
Fixes: 8498a30e1b ("RDMA/irdma: Register auxiliary driver and implement private channel OPs")
Link: https://lore.kernel.org/r/20210916191222.824-2-shiraz.saleem@intel.com
Reported-by: LiLiang <liali@redhat.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.
Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
FRMR WQE requires to provide the log2 value of the PBL and page size. Use
the standard ilog2() to calculate the log2 value
Link: https://lore.kernel.org/r/1631709163-2287-11-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use GFP_KERNEL instead of GFP_ATOMIC while allocating control path
structures which will be only called from non atomic context
Link: https://lore.kernel.org/r/1631709163-2287-10-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the FRMR is allocated with single page, driver is attempting to
create a level 0 HWQ and not allocating any page because the nopte field
is set. This causes the crash during post_send as the pbl is not
populated.
To avoid this crash, check for the nopte bit during HWQ creation with
single page and create a level 1 page table and populate the pbl address
correctly.
Link: https://lore.kernel.org/r/1631709163-2287-9-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fill the missing parameters for the FW command while querying SRQ.
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1631709163-2287-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HW can support multiple page sizes. Enable bits for enabling sizes from 4k
to 1G by reporting page_size_cap.
Link: https://lore.kernel.org/r/1631709163-2287-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver has 1ms delay between the polling for atomic command completion.
Polling immediately after issuing command usually doesn't report any
completions. So all commands in the blocking path needs two iterations. So
effectively 1ms spend on each command. HW requires much lesser time for
each command. So reduce the delay to 1us and increase the iteration count
to wait for the same time.
Link: https://lore.kernel.org/r/1631709163-2287-5-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use separate buffers for the request and response data. Eventhough the
response data is not used, providing the correct length is appropriate.
Link: https://lore.kernel.org/r/1631709163-2287-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update a statistics counter name as the interface structure got updated.
Fixes: 9d6b648c31 ("bnxt_en: Update firmware interface spec to 1.10.1.65.")
Link: https://lore.kernel.org/r/1631709163-2287-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement extended statistics counters for newer adapters. Check if the FW
support for this command and issue the FW command only if is
supported. Includes code re-organization to handle extended stats. Also,
add AH and PD software counters.
Link: https://lore.kernel.org/r/1631709163-2287-2-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If cma_listen_on_all() fails it leaves the per-device ID still on the
listen_list but the state is not set to RDMA_CM_ADDR_BOUND.
When the cmid is eventually destroyed cma_cancel_listens() is not called
due to the wrong state, however the per-device IDs are still holding the
refcount preventing the ID from being destroyed, thus deadlocking:
task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084
Call Trace:
__schedule+0x29a/0x780
? free_unref_page_commit+0x9b/0x110
schedule+0x3c/0xa0
schedule_timeout+0x215/0x2b0
? __flush_work+0x19e/0x1e0
wait_for_completion+0x8d/0xf0
_destroy_id+0x144/0x210 [rdma_cm]
ucma_close_id+0x2b/0x40 [rdma_ucm]
__destroy_id+0x93/0x2c0 [rdma_ucm]
? __xa_erase+0x4a/0xa0
ucma_destroy_id+0x9a/0x120 [rdma_ucm]
ucma_write+0xb8/0x130 [rdma_ucm]
vfs_write+0xb4/0x250
ksys_write+0xb5/0xd0
? syscall_trace_enter.isra.19+0x123/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Ensure that cma_listen_on_all() atomically unwinds its action under the
lock during error.
Fixes: c80a0c52d8 ("RDMA/cma: Add missing error handling of listen_id")
Link: https://lore.kernel.org/r/20210913093344.17230-1-thomas.liu@ucloud.cn
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210831083223.65797-1-weijunji@bytedance.com
Signed-off-by: Junji Wei <weijunji@bytedance.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ROCE uses IGMP for Multicast instead of the native Infiniband system where
joins are required in order to post messages on the Multicast group. On
Ethernet one can send Multicast messages to arbitrary addresses without
the need to subscribe to a group.
So ROCE correctly does not send IGMP joins during rdma_join_multicast().
F.e. in cma_iboe_join_multicast() we see:
if (addr->sa_family == AF_INET) {
if (gid_type == IB_GID_TYPE_ROCE_UDP_ENCAP) {
ib.rec.hop_limit = IPV6_DEFAULT_HOPLIMIT;
if (!send_only) {
err = cma_igmp_send(ndev, &ib.rec.mgid,
true);
}
}
} else {
So the IGMP join is suppressed as it is unnecessary.
However no such check is done in destroy_mc(). And therefore leaving a
sendonly multicast group will send an IGMP leave.
This means that the following scenario can lead to a multicast receiver
unexpectedly being unsubscribed from a MC group:
1. Sender thread does a sendonly join on MC group X. No IGMP join
is sent.
2. Receiver thread does a regular join on the same MC Group x.
IGMP join is sent and the receiver begins to get messages.
3. Sender thread terminates and destroys MC group X.
IGMP leave is sent and the receiver no longer receives data.
This patch adds the same logic for sendonly joins to destroy_mc() that is
also used in cma_iboe_join_multicast().
Fixes: ab15c95a17 ("IB/core: Support for CMA multicast join flags")
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2109081340540.668072@gentwo.de
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
clang becomes confused due to the comparison to NULL in a integer constant
expression context:
>> drivers/infiniband/hw/qib/qib_sysfs.c:413:1: error: static_assert expression is not an integral constant expression
QIB_DIAGC_ATTR(rc_resends);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_sysfs.c:406:16: note: expanded from macro 'QIB_DIAGC_ATTR'
static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL); \
Nathan found __same_type that solves this problem nicely, so use it instead.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An important error case regression fixes in mlx5:
- Wrong size used when computing the error path smaller allocation request
leads to corruption
- Confusing but ultimately harmless alignment mis-calculation
- Static checker warnings:
Null pointer subtraction in qib
kcalloc in bnxt_re
Missing static on global variable in hfi1
-----BEGIN PGP SIGNATURE-----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=Sg6A
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"I don't usually send a second PR in the merge window, but the fix to
mlx5 is significant enough that it should start going through the
process ASAP. Along with it comes some of the usual -rc stuff that
would normally wait for a -rc2 or so.
Summary:
Important error case regression fixes in mlx5:
- Wrong size used when computing the error path smaller allocation
request leads to corruption
- Confusing but ultimately harmless alignment mis-calculation
Static checker warning fixes:
- NULL pointer subtraction in qib
- kcalloc in bnxt_re
- Missing static on global variable in hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/hfi1: make hist static
RDMA/bnxt_re: Prefer kcalloc over open coded arithmetic
IB/qib: Fix null pointer subtraction compiler warning
RDMA/mlx5: Fix xlt_chunk_align calculation
RDMA/mlx5: Fix number of allocated XLT entries
This symbol is not used outside of trace.c, so marks it static.
Fix the following sparse warning:
drivers/infiniband/hw/hfi1/trace.c:491:23: warning: symbol 'hist' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1630921723-21545-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As noted in the "Deprecated Interfaces, Language Features, Attributes, and
Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead to
values wrapping around and a smaller allocation being made than the caller
was expecting. Using those allocations could lead to linear overflows of
heap memory and other misbehaviors.
In this case this is not actually dynamic sizes: both sides of the
multiplication are constant values. However it is best to refactor this
anyway, just to keep the open-coded math idiom out of code.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
Also, remove the unnecessary initialization of the sqp_tbl variable since
it is set a few lines later.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://lore.kernel.org/r/20210905081812.17113-1-len.baker@gmx.com
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
>> drivers/infiniband/hw/qib/qib_sysfs.c:411:1: warning: performing pointer subtraction with a null pointer has undefined behavior
+[-Wnull-pointer-subtraction]
QIB_DIAGC_ATTR(rc_resends);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_sysfs.c:408:51: note: expanded from macro 'QIB_DIAGC_ATTR'
.counter = &((struct qib_ibport *)0)->rvp.n_##N - (u64 *)0, \
Use offsetof and accomplish the type check using static_assert.
Fixes: 4a7aaf88c8 ("RDMA/qib: Use attributes for the port sysfs")
Link: https://lore.kernel.org/r/0-v1-43ae3c759177+65-qib_type_jgg@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The XLT chunk alignment depends on ent_size not sizeof(ent_size) aka
sizeof(size_t). The incoming ent_size is either 8 or 16, so the
miscalculation when 16 is required is only an over-alignment and
functional harmless.
Fixes: 8010d74b99 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()")
Link: https://lore.kernel.org/r/20210908081849.7948-2-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In commit 8010d74b99 ("RDMA/mlx5: Split the WR setup out of
mlx5_ib_update_xlt()") the allocation logic was split out of
mlx5_ib_update_xlt() and the logic was changed to enable better OOM
handling. Sadly this change introduced a miscalculation of the number of
entries that were actually allocated when under memory pressure where it
can actually become 0 which on s390 lets dma_map_single() fail.
It can also lead to corruption of the free pages list when the wrong
number of entries is used in the calculation of sg->length which is used
as argument for free_pages().
Fix this by using the allocation size instead of misusing get_order(size).
Cc: stable@vger.kernel.org
Fixes: 8010d74b99 ("RDMA/mlx5: Split the WR setup out of mlx5_ib_update_xlt()")
Link: https://lore.kernel.org/r/20210908081849.7948-1-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs core
code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation
-----BEGIN PGP SIGNATURE-----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=ZwOe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
From Maor Gottlieb
====================
Fix the use of nents and orig_nents in the sg table append helpers. The
nents should be used by the DMA layer to store the number of DMA mapped
sges, the orig_nents is the number of CPU sges.
Since the sg append logic doesn't always create a SGL with exactly
orig_nents entries store a total_nents as well to allow the table to be
properly free'd and reorganize the freeing logic to share across all the
use cases.
====================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* 'sg_nents':
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
In order to create DCS QPs, we don't need to rely on both
log_max_dci_stream_channels and log_max_dci_errored_streams capabilities.
Fixes: 11656f593a ("RDMA/mlx5: Add DCS offload support")
Link: https://lore.kernel.org/r/3e7b3363fd73686176cc584295e86832a7cf99b2.1630320354.git.leonro@nvidia.com
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB specification, the destination qpn is allowed to be
filled into the qpc only when the qp transitions from Init to RTR, so this
code is unused.
Link: https://lore.kernel.org/r/1629985056-57004-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The resp passed to the user space represents the enable flag of qp,
incomplete assignment will cause some features of the user space to be
disabled.
Fixes: 90ae0b57e4 ("RDMA/hns: Combine enable flags of qp")
Fixes: aba457ca89 ("RDMA/hns: Support owner mode doorbell")
Link: https://lore.kernel.org/r/1629985056-57004-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dip_idx and dgid should be a one-to-one mapping relationship, but when
qp_num loops back to the start number, it may happen that two different
dgid are assiociated to the same dip_idx incorrectly.
One solution is to store the qp_num that is not assigned to dip_idx in an
array. When a dip_idx needs to be allocated to a new dgid, an spare qp_num
is extracted and assigned to dip_idx.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the dgid-dip_idx mapping relationship exists, dip should be assigned.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dip_idx is associated with qp_num whose data type is u32. However, dip_idx
is incorrectly defined as u8 data in the hns_roce_dip struct, which leads
to data truncation during value assignment.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/1629884592-23424-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Junxian Huang <huangjunxian4@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In RNR NAK screnario, according to the specification, when no credit is
available, only the first fragment of the send request can be sent. The
LSN(Limit Sequence Number) field should be 0 or the entire packet will be
resent.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1629883169-2306-1-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A MAD packet is sent as an unreliable datagram (UD). SA requests are sent
as MAD packets. As such, SA requests or responses may be silently dropped.
IB Core's MAD layer has a timeout and retry mechanism, which amongst
other, is used by RDMA CM. But it is not used by SA queries. The lack of
retries of SA queries leads to long specified timeout, and error being
returned in case of packet loss. The ULP or user-land process has to
perform the retry.
Fix this by taking advantage of the MAD layer's retry mechanism.
First, a check against a zero timeout is added in rdma_resolve_route(). In
send_mad(), we set the MAD layer timeout to one tenth of the specified
timeout and the number of retries to 10. The special case when timeout is
less than 10 is handled.
With this fix:
# ucmatose -c 1000 -S 1024 -C 1
runs stable on an Infiniband fabric. Without this fix, we see an
intermittent behavior and it errors out with:
cmatose: event: RDMA_CM_EVENT_ROUTE_ERROR, error: -110
(110 is ETIMEDOUT)
Link: https://lore.kernel.org/r/1628784755-28316-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This allows using the normal sg_table APIs and makes all the code
cleaner. Remove sgt, nents and nmapd from ib_umem.
Link: https://lore.kernel.org/r/20210824142531.3877007-4-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
orig_nents should represent the number of entries with pages,
but __sg_alloc_table_from_pages sets orig_nents as the number of
total entries in the table. This is wrong when the API is used for
dynamic allocation where not all the table entries are mapped with
pages. It wasn't observed until now, since RDMA umem who uses this
API in the dynamic form doesn't use orig_nents implicit or explicit
by the scatterlist APIs.
Fix it by changing the append API to track the SG append table
state and have an API to free the append table according to the
total number of entries in the table.
Now all APIs set orig_nents as number of enries with pages.
Fixes: 07da1223ec ("lib/scatterlist: Add support in dynamic allocation of SG table from pages")
Link: https://lore.kernel.org/r/20210824142531.3877007-3-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
RDMA is the only in-kernel user that uses __sg_alloc_table_from_pages to
append pages dynamically. In the next patch. That mode will be extended
and that function will get more parameters. So separate it into a unique
function to make such change more clear.
Link: https://lore.kernel.org/r/20210824142531.3877007-2-maorg@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to support more coalesce parameters through netlink,
add two new parameter kernel_coal and extack for .set_coalesce
and .get_coalesce, then some extra info can return to user with
the netlink API.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The resources that use the hns bitmap interface: qp, cq, mr, pd, xrcd,
uar, srq, have been changed to IDA interfaces, and the unused hns' own
bitmap interfaces need to be deleted.
Link: https://lore.kernel.org/r/1629336980-17499-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch srq index allocation and release from hns' own bitmap interface to
IDA interface.
Link: https://lore.kernel.org/r/1629336980-17499-3-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Switch uar index allocation and release from hns' own bitmap interface to
IDA interface.
Link: https://lore.kernel.org/r/1629336980-17499-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ownerbit mode is for external card mode. Make it controlled by the
firmware.
Fixes: aba457ca89 ("RDMA/hns: Support owner mode doorbell")
Link: https://lore.kernel.org/r/1629539607-33217-4-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ support un-interrupt mode only, and firmware ignores this mode flag,
so remove it.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1629539607-33217-2-git-send-email-liangwenpeng@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The vector field naming is quite confusing, it is better referred to as
irqn.
Link: https://lore.kernel.org/r/20210811151131.39138-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cpu field in efa_irq struct is unused, remove it.
Link: https://lore.kernel.org/r/20210811151131.39138-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Casting to (void) does nothing, remove them.
Link: https://lore.kernel.org/r/20210806112112.124313-7-haris.iqbal@ionos.com
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There are mis-match at counting inflight IO after changing the multipath
policy.
For example, we started fio test with round-robin policy and then we
changed the policy to min-inflight. IOs created under the RR policy is
finished under the min-inflight policy and inflight counter only
decreased. So the counter would be negative value. And also we started
fio test with min-inflight policy and changed the policy to the
round-robin. IOs created under the min-inflight policy increased the
inflight IO counter but the inflight IO counter was not decreased because
the policy was the round-robin when IO was finished.
So it should count IOs only if the IO is created under the min-inflight
policy. It should not care the policy when the IO is finished.
This patch adds a field mp_policy in struct rtrs_clt_io_req and stores the
multipath policy when an object of rtrs_clt_io_req is created. Then
rtrs-clt checks the mp_policy of only struct rtrs_clt_io_req instead of
the struct rtrs_clt.
Link: https://lore.kernel.org/r/20210806112112.124313-6-haris.iqbal@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The IO performance test with fio after swapping the likely and unlikely
macros in all if-statement shows no difference. They do not help for the
performance of rtrs.
Thanks to Haakon Bugge for the test scenario.
The fio test did random read on 32 rnbd devices and 64 processes.
Test environment:
- Intel(R) Xeon(R) Gold 6130 CPU @ 2.10GHz
- 376G memory
- kernel version: 5.4.86
- gcc version: gcc (Debian 8.3.0-6) 8.3.0
- Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5]
Test result:
- before swapping: IOPS=829k, BW=3239MiB/s
- after swapping: IOPS=829k, BW=3238MiB/s
- remove all (un)likely: IOPS=829k, BW=3238MiB/s
Link: https://lore.kernel.org/r/20210806112112.124313-5-haris.iqbal@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The two functions are unused, so just remove them.
Link: https://lore.kernel.org/r/20210806112112.124313-3-haris.iqbal@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When all the paths are removed for a session, the addition of the first
path is like a new session for the storage server.
Hence, for_new_clt has to be set to 1.
Link: https://lore.kernel.org/r/20210806112112.124313-2-haris.iqbal@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Mike Marciniszyn
Kamal Heib
Christophe JAILLET
Colin Ian King
Zhu Yanjun
Yixing Liu
Jiapeng Chong
Guoqing Jiang
Christoph Hellwig
Jakub Kicinski
Jack Wang
Håkon Bugge
Yangyang Li
Alaa Hleihel
Pavel Skripkin
Shiraz Saleem
Xinhao Liu
Xinhao Liu
Bob Pearson
Dan Carpenter
Leon Romanovsky
Changcheng Deng
Dennis Dalessandro
Linus Torvalds
Aharon Landau
Jason Gunthorpe
Chengchang Tang
Scott Breyer
Alok Prasad
Haoyue Xu
Joe Perches
Mark Zhang
Gal Pressman
Saeed Mahameed
Arnd Bergmann
Greg Kroah-Hartman
wangyugui
Mustafa Ismail
Prabhakar Kushwaha
Bart Van Assche
Colin Ian King
Cai Huoqing
Xiao Yang
Patrisious Haddad
Andy Shevchenko
Logan Gunthorpe
Dmitry Bogdanov
Shay Drory
Md Haris Iqbal
Rao Shoaib
Shai Malin
Meir Lichtinger
Gustavo A. R. Silva
Wenpeng Liang
Guo Zhi
Sindhu Devale
Selvin Xavier
Edwin Peer
Tao Liu
Zhu Yanjun
Junji Wei
Christoph Lameter
Len Baker
Niklas Schnelle
Lior Nahmanson
Weihang Li
Junxian Huang
Shaokun Zhang
Maor Gottlieb
Yufeng Mo
Lang Cheng
Li Zhijian
Gioh Kim