Граф коммитов

1170 Коммитов

Автор SHA1 Сообщение Дата
Andrew Lunn 0d21cdaa9b batman-adv: NETIF_F_NETNS_LOCAL feature to prevent netns moves
The batX soft interface should not be moved between network name
spaces. This is similar to bridges, bonds, tunnels, which are not
allowed to move between network namespaces.

Suggested-by: Daniel Ehlers <danielehlers@mindeye.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Antonio Quartulli <a@unstable.cc>
Reviewed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10 18:26:44 +08:00
Sven Eckelmann 7142fc1072 batman-adv: Remove hdr_size skb size check in batadv_interface_rx
The callers of batadv_interface_rx have to make sure that enough data can
be pulled from the skb when they read the batman-adv header. The only two
functions using it are either calling pskb_may_pull with hdr_size directly
(batadv_recv_bcast_packet) or indirectly via batadv_check_unicast_packet
(batadv_recv_unicast_packet).

Reported-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10 18:26:43 +08:00
Sven Eckelmann 6535db56d5 batman-adv: Remove unused parameter recv_if of batadv_interface_rx
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10 18:26:43 +08:00
David S. Miller 5332174a83 In this pull request you have:
- two changes to the MAINTAINERS file where one marks our mailing list
   as moderated and the other adds a missing documentation file
 - kernel-doc fixes
 - code refactoring and various cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXKRJdAAoJEJ4aZjxxc6bKSVEP/1Ky6O7+oanpsjjwUiZDMj0W
 KPtoPQ/VsJxu51e0OYi78jHtGned7xV+FLyFx1k8BwLPThYtd8ysDVqMqFAmXsRh
 JPOT+7Y+lf8/FBUYdKyJcsaoqAeRPXnY+p0vE7woLaxk+GOiWpOIip73nisgu9gy
 NxfmgJ77WjEV2v6IiD4djfYmZqOOvCF6IGWkubtc0WZdg5ma/2u7vYEDBy3yjN/b
 og/5joT3GZC8K6X8BabxNSLDER+qs489a6rOUGoRK4NCU3LhELAywuAws30nPrB/
 vFJ6BvEEzkaGcXJViSFelb9zsi4ngwvY9OPQnFCmOicDzJN7jqdV6yXcnSLurph1
 sDR+1+k1f63czCJpG8Uhj+8SaQO7P8T9A5nL1UKwhdCOENCuj8Vtp5y4S2A3bOSe
 jEv1dy9FC3yaPvtkyUN+wOuDerPoJr5pFuVRz2RGyeFSMxs+RPBLYf/D0+x1om9A
 Vz63ecsygk7S7qGNXHUbQvX5Q5Kv5f4y4XjvmrH3rBq+T/WC6V5vbkTo8L4CapX9
 KNffNGl1RWqHz/TVLSrQmlHc9zNM/Rg0am2MIxplGfP0rQSUNob/qjD50KPJSLF/
 M8tmOBSCNAxzlfAwcn+VJLq+xt6Mr2mkhwZZPYGQPno8JJqCMq52k4w1AQvbv+eI
 sxgFGvTq1WACUDx03vyx
 =qoV3
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
pull request: batman-adv 20160504

In this pull request you have:
- two changes to the MAINTAINERS file where one marks our mailing list
  as moderated and the other adds a missing documentation file
- kernel-doc fixes
- code refactoring and various cleanups
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04 16:21:08 -04:00
Florian Westphal 860e9538a9 treewide: replace dev->trans_start update with helper
Replace all trans_start updates with netif_trans_update helper.
change was done via spatch:

struct net_device *d;
@@
- d->trans_start = jiffies
+ netif_trans_update(d)

Compile tested only.

Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: linux-xtensa@linux-xtensa.org
Cc: linux1394-devel@lists.sourceforge.net
Cc: linux-rdma@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: MPT-FusionLinux.pdl@broadcom.com
Cc: linux-scsi@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-hams@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: linux-bluetooth@vger.kernel.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04 14:16:49 -04:00
Sven Eckelmann 64ae744553 batman-adv: Split batadv_iv_ogm_orig_del_if function
batadv_iv_ogm_orig_del_if handles two different buffers bcast_own and
bcast_own_sum which should be resized. The error handling two for
allocating these buffers causes the complexity of this function. This can
be avoided completely when the function is split into a main function
handling the locking, freeing and call of the subfunctions.

The subfunction can then independently handle the resize of the buffers.
This also allows to easily reuse the old buffer (which always is larger) in
case a smaller buffer could not be allocated without increasing the code
complexity.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Simon Wunderlich 86de37c1fb batman-adv: Merge batadv_v_ogm_orig_update into batadv_v_ogm_route_update
Since batadv_v_ogm_orig_update() was only called from one place and the
calling function became very short, merge these two functions together.

This should also reflect the protocol description of B.A.T.M.A.N. V
better.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Simon Wunderlich efcc9d3069 batman-adv: move and restructure batadv_v_ogm_forward
To match our code better to the protocol description of B.A.T.M.A.N. V,
move batadv_v_ogm_forward() out into batadv_v_ogm_process_per_outif()
and move all checks directly deciding whether the OGM should be
forwarded into batadv_v_ogm_forward().

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Simon Wunderlich 121bdca0d4 batman-adv: fix debuginfo macro style issue
Structure initialization within the macros should follow the general
coding style used in the kernel: put the initialization of the first
variable and the closing brace on a separate line.

Reported-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Sven Eckelmann 6fc77a5486 batman-adv: Fix function names on new line starting with '*'
Some really long function names in batman-adv require a newline between
return type and the function name. This has lead to some lines starting
with *batadv_...

This * belongs to the return type and thus should be on the same line as
the return type.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Sven Eckelmann f298cb94d6 batman-adv: Add kernel-doc for batadv_interface_rx
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Sven Eckelmann 98a5b1d88c batman-adv: Fix kerneldoc for batadv_compare_claim
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Sven Eckelmann d3abce780d batman-adv: Fix checkpatch warning about 'unsigned' type
checkpatch.pl warns about the use of 'unsigned' as a short form for
'unsigned int'.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Antonio Quartulli 6d030de89f batman-adv: fix wrong names in kerneldoc
Signed-off-by: Antonio Quartulli <a@unstable.cc>
[sven@narfation.org: Fix additional names]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-04 02:22:03 +08:00
Geliang Tang 4ba4bc0f74 batman-adv: use to_delayed_work
Use to_delayed_work() instead of open-coding it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Geliang Tang fb1f23eab6 batman-adv: use list_for_each_entry_safe
Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Antonio Quartulli <a@unstable.cc>
Reviewed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Antonio Quartulli 925a6f3790 batman-adv: use static string for table headers
Use a static string when showing table headers rather then
a nonsense parametric one with fixed arguments.

It is easier to grep and it does not need to be recomputed
at runtime each time.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-04 02:22:03 +08:00
Simon Wunderlich 565489df24 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04 02:22:03 +08:00
Sven Eckelmann abe59c6522 batman-adv: Fix reference counting of hardif_neigh_node object for neigh_node
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held
an implicit reference to it. But this reference was never stored in form of
a pointer in the batadv_neigh_node itself. Instead
batadv_neigh_node_release depends on a consistent state of
hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the
batadv_hardif_neigh_node object which it has a reference for. But
batadv_hardif_neigh_get cannot guarantee that because it is working only
with rcu_read_lock on this list. It can therefore happen that a neigh_addr
is in this list twice or that batadv_hardif_neigh_get cannot find the
batadv_hardif_neigh_node for an neigh_addr due to some other list
operations taking place at the same time.

Instead add a batadv_hardif_neigh_node pointer directly in
batadv_neigh_node which will be used for the reference counter decremented
on release of batadv_neigh_node.

Fixes: cef63419f7 ("batman-adv: add list of unique single hop neighbors per hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29 19:46:11 +08:00
Sven Eckelmann a33d970d0b batman-adv: Fix reference counting of vlan object for tt_local_entry
The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an
implicit reference to it. But this reference was never stored in form of a
pointer in the tt_local_entry itself. Instead batadv_tt_local_remove,
batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend
on a consistent state of bat_priv->softif_vlan_list and that
batadv_softif_vlan_get always returns the batadv_softif_vlan object which
it has a reference for. But batadv_softif_vlan_get cannot guarantee that
because it is working only with rcu_read_lock on this list. It can
therefore happen that an vid is in this list twice or that
batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to
some other list operations taking place at the same time.

Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry
which will be used for the reference counter decremented on release of
batadv_tt_local_entry.

Fixes: 35df3b298f ("batman-adv: fix TT VLAN inconsistency on VLAN re-add")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29 19:46:11 +08:00
Antonio Quartulli b6cf5d499f batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP event
At the moment there is no explicit reactivation of an hard-interface
upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is
reactivated as soon as the next OGM is scheduled for sending, but this
mechanism does not work with B.A.T.M.A.N. V. The latter does not rely
on the same scheduling mechanism as its predecessor and for this reason
the hard-interface remains deactivated forever after being brought down
once.

This patch fixes the reactivation mechanism by adding a new routing API
which explicitly allows each algorithm to perform any needed operation
upon interface re-activation.

Such API is optional and is implemented by B.A.T.M.A.N. V only and it
just takes care of setting the iface status to ACTIVE

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29 19:46:11 +08:00
Antonio Quartulli 2871734e85 batman-adv: fix DAT candidate selection (must use vid)
Now that DAT is VLAN aware, it must use the VID when
computing the DHT address of the candidate nodes where
an entry is going to be stored/retrieved.

Fixes: be1db4f661 ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Antonio Quartulli <a@unstable.cc>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29 19:46:10 +08:00
Linus Lüssing c4fdb6cff2 batman-adv: Fix broadcast/ogm queue limit on a removed interface
When removing a single interface while a broadcast or ogm packet is
still pending then we will free the forward packet without releasing the
queue slots again.

This patch is supposed to fix this issue.

Fixes: 6d5808d4ae ("batman-adv: Add missing hardif_free_ref in forw_packet_free")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24 15:41:56 +08:00
Sven Eckelmann d1a65f1741 batman-adv: Reduce refcnt of removed router when updating route
_batadv_update_route rcu_derefences orig_ifinfo->router outside of a
spinlock protected region to print some information messages to the debug
log. But this pointer is not checked again when the new pointer is assigned
in the spinlock protected region. Thus is can happen that the value of
orig_ifinfo->router changed in the meantime and thus the reference counter
of the wrong router gets reduced after the spinlock protected region.

Just rcu_dereferencing the value of orig_ifinfo->router inside the spinlock
protected region (which also set the new pointer) is enough to get the
correct old router object.

Fixes: e1a5382f97 ("batman-adv: Make orig_node->router an rcu protected pointer")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24 15:41:25 +08:00
Sven Eckelmann f2d23861b8 batman-adv: Deactivate TO_BE_ACTIVATED hardif on shutdown
The shutdown of an batman-adv interface can happen with one of its slave
interfaces still being in the BATADV_IF_TO_BE_ACTIVATED state. A possible
reason for it is that the routing algorithm BATMAN_V was selected and
batadv_schedule_bat_ogm was not yet called for this interface. This slave
interface still has to be set to BATADV_IF_INACTIVE or the batman-adv
interface will never reduce its usage counter and thus never gets shutdown.

This problem can be simulated via:

    $ modprobe dummy
    $ modprobe batman-adv routing_algo=BATMAN_V
    $ ip link add bat0 type batadv
    $ ip link set dummy0 master bat0
    $ ip link set dummy0 up
    $ ip link del bat0
    unregister_netdevice: waiting for bat0 to become free. Usage count = 3

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24 15:40:23 +08:00
Marek Lindner e48474ed8a batman-adv: init neigh node last seen field
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24 15:39:19 +08:00
Sven Eckelmann c78296665c batman-adv: Check skb size before using encapsulated ETH+VLAN header
The encapsulated ethernet and VLAN header may be outside the received
ethernet frame. Thus the skb buffer size has to be checked before it can be
parsed to find out if it encapsulates another batman-adv packet.

Fixes: 420193573f ("batman-adv: softif bridge loop avoidance")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-24 15:37:21 +08:00
Arnd Bergmann fb653ebddc batman-adv: clarify CFG80211 dependency
The driver calls cfg80211_get_station, which may be part of a
module, so we must not enable BATMAN_ADV_BATMAN_V if
BATMAN_ADV=y and CFG80211=m:

net/built-in.o: In function `batadv_v_elp_get_throughput':
(text+0x5c62c): undefined reference to `cfg80211_get_station'

This clarifies the dependency to cover all combinations.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c833484e5f ("batman-adv: ELP - compute the metric based on the estimated throughput")
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02 13:45:47 -05:00
Simon Wunderlich 97575407e9 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-29 16:25:08 +08:00
Linus Luessing 626d23e83c batman-adv: B.A.T.M.A.N. V - implement bat_neigh_print API
Lists all neighbours detected by the Echo Locating Protocol
(ELP) and their throughput metric.

Initially Developed by Linus during a 6 months trainee study
period in Ascom (Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29 16:25:08 +08:00
Antonio Quartulli 261e264db6 batman-adv: B.A.T.M.A.N. V - implement bat_orig_print API
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:25:07 +08:00
Antonio Quartulli 9786906022 batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:25:07 +08:00
Antonio Quartulli 8d2d499e08 batman-adv: ELP - send unicast ELP packets for throughput sampling
In case of an unused wireless link, the mac80211 throughput estimation
won't get updated further. Consequently, the reported throughput metric
will become obsolete.

With this patch unicast sampling is introduced by periodically sending
unicast ELP packets to each neighbor on idle WiFi links. These sampling
packets will fill an entire frame, so that the measurement is as
reliable as possible

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:25:07 +08:00
Antonio Quartulli c833484e5f batman-adv: ELP - compute the metric based on the estimated throughput
In case of wireless interface retrieve the throughput by
querying cfg80211. To perform this call a separate work
must be scheduled because the function may sleep and this
is not allowed within an RCU protected context (RCU in this
case is used to iterate over all the neighbours).

Use ethtool to retrieve information about an Ethernet link
like HALF/FULL_DUPLEX and advertised bandwidth (e.g.
100/10Mbps).

The metric is updated each time a new ELP packet is sent,
this way it is possible to timely react to a metric
variation which can imply (for example) a neighbour
disconnection.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:25:06 +08:00
Antonio Quartulli 95d392784d batman-adv: keep track of when unicast packets are sent
To enable ELP to send probing packets over wireless links
only if needed, batman-adv must keep track of the last time
it sent a unicast packet towards every neighbour.

For this purpose a 2 main changes are introduced:
1) a new member of the elp_neigh_node structure stores the
   last time a unicast packet was sent towards this neighbour;
2) a wrapper function for sending unicast packets is
   implemented. This function will simply update the member
   describe din point 1) and then forward the packet to the
   real sending routine.

Point 2) implies that any code-path leading to a unicast
sending now has to use the new wrapper.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:32 +08:00
Antonio Quartulli 0b5ecc6811 batman-adv: add throughput override attribute to hard_ifaces
This attribute is exported to user space to disable the link
throughput auto-detection by setting a fixed value.
The throughput override value is used when batman-adv is
computing the link throughput towards a neighbour.

If the value is set to 0 then batman-adv will try to detect
the throughput by itself.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:32 +08:00
Antonio Quartulli 9323158ef9 batman-adv: OGMv2 - implement originators logic
Add the support for recognising new originators in the
network and rebroadcast their OGMs.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:31 +08:00
Antonio Quartulli 0da0035942 batman-adv: OGMv2 - add basic infrastructure
This is the initial implementation of the new OGM protocol
(version 2). It has been designed to work on top of the
newly added ELP.

In the previous version the OGM protocol was used to both
measure link qualities and flood the network with the metric
information. In this version the protocol is in charge of
the latter task only, leaving the former to ELP.

This means being able to decouple the interval used by the
neighbor discovery from the OGM broadcasting, which revealed
to be costly in dense networks and needed to be relaxed so
leading to a less responsive routing protocol.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:31 +08:00
Linus Luessing 7f136cd491 batman-adv: ELP - adding sysfs parameter for elp interval
This parameter can be set individually on each interface and
allows the configuration of the elp interval for the link
quality measurements during runtime. Usually it is desirable
to set it to a higher (= slower) value on interfaces which
have a more static characteristic (e.g. wired interfaces)
or very dense neighbourhoods to reduce overhead.

Developed by Linus during a 6 months trainee study period in
Ascom (Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
[antonio@open-mesh.com: respin on top of the latest master]
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29 16:05:30 +08:00
Linus Luessing 162bd64c24 batman-adv: ELP - creating neighbor structures
Initially developed by Linus during a 6 months trainee study
period in Ascom (Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29 16:05:30 +08:00
Linus Luessing d6f94d91f7 batman-adv: ELP - adding basic infrastructure
The B.A.T.M.A.N. protocol originally only used a single
message type (called OGM) to determine the link qualities to
the direct neighbors and spreading these link quality
information through the whole mesh. This procedure is
summarized on the BATMAN concept page and explained in
details in the RFC draft published in 2008.

This approach was chosen for its simplicity during the
protocol design phase and the implementation. However, it
also bears some drawbacks:

 *  Wireless interfaces usually come with some packet loss,
    therefore a higher broadcast rate is desirable to allow
    a fast reaction on flaky connections.
    Other interfaces of the same host might be connected to
    Ethernet LANs / VPNs / etc which rarely exhibit packet
    loss would benefit from a lower broadcast rate to reduce
    overhead.
 *  It generally is more desirable to detect local link
    quality changes at a faster rate than propagating all
    these changes through the entire mesh (the far end of
    the mesh does not need to care about local link quality
    changes that much). Other optimizations strategies, like
    reducing overhead, might be possible if OGMs weren't
    used for all tasks in the mesh at the same time.

As a result detecting local link qualities shall be handled
by an independent message type, ELP, whereas the OGM message
type remains responsible for flooding the mesh with these
link quality information and determining the overall path
transmit qualities.

Developed by Linus during a 6 months trainee study period in
Ascom (Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29 16:05:29 +08:00
Linus Luessing 0744ff8fa8 batman-adv: Add hard_iface specific sysfs wrapper macros for UINT
This allows us to easily add a sysfs parameter for an
unsigned int later, which is not for a batman mesh interface
(e.g. bat0), but for a common interface instead. It allows
reading and writing an atomic_t in hard_iface (instead of
bat_priv compared to the mesh variant).

Developed by Linus during a 6 months trainee study period in
Ascom (Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
[antonio@open-mesh.com: rename functions and move macros]
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29 16:05:29 +08:00
Sven Eckelmann 7e2366c626 batman-adv: Rename batadv_tt_orig_list_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:51:01 +08:00
Sven Eckelmann 5dafd8a6cc batman-adv: Rename batadv_tt_global_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:51:01 +08:00
Sven Eckelmann 95c0db90c7 batman-adv: Rename batadv_tt_local_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:51:00 +08:00
Sven Eckelmann 21754e2501 batman-adv: Rename batadv_orig_node_vlan *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:50:58 +08:00
Sven Eckelmann 5fff28255f batman-adv: Rename batadv_nc_path *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:11 +08:00
Sven Eckelmann 27ad7545bb batman-adv: Rename batadv_nc_node *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:11 +08:00
Sven Eckelmann 9c3bf08189 batman-adv: Rename batadv_softif_vlan *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:10 +08:00
Sven Eckelmann 4a13147cb5 batman-adv: Rename batadv_tvlv_container *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:10 +08:00
Sven Eckelmann ba610043af batman-adv: Rename batadv_tvlv_handler *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:09 +08:00
Sven Eckelmann 3a01743ddf batman-adv: Rename batadv_gw_node *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:49:06 +08:00
Sven Eckelmann a6416f9ffc batman-adv: Rename batadv_dat_entry *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:28 +08:00
Sven Eckelmann 321e3e0884 batman-adv: Rename batadv_claim *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:27 +08:00
Sven Eckelmann c8b86c1241 batman-adv: Rename batadv_backbone_gw *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:27 +08:00
Sven Eckelmann accadc35a1 batman-adv: Rename batadv_hardif_neigh *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:26 +08:00
Sven Eckelmann 35f94779c9 batman-adv: Rename batadv_orig_ifinfo *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:26 +08:00
Sven Eckelmann 044fa3ae12 batman-adv: Rename batadv_neigh_ifinfo *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:25 +08:00
Sven Eckelmann 25bb250996 batman-adv: Rename batadv_neigh_node *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:25 +08:00
Sven Eckelmann 82047ad7fe batman-adv: Rename batadv_hardif *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:24 +08:00
Sven Eckelmann 5d9673109c batman-adv: Rename batadv_orig_node *_free_ref function to *_put
The batman-adv source code is the only place in the kernel which uses the
*_free_ref naming scheme for the *_put functions. Changing it to *_put
makes it more consistent and makes it easier to understand the connection
to the *_get functions.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23 13:48:24 +08:00
Antonio Quartulli e9ccd7e39c batman-adv: remove unused BATADV_BONDING_TQ_THRESHOLD constant
BATADV_BONDING_TQ_THRESHOLD is not used anymore since the implementation
of the bat_neigh_is_similar_or_better() API function.
Such function uses the more generic BATADV_TQ_SIMILARITY_THRESHOLD
constant.

Therefore, remove definition of the unused BATADV_BONDING_TQ_THRESHOLD
constant.

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-23 13:48:23 +08:00
David S. Miller b633353115 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/bcm7xxx.c
	drivers/net/phy/marvell.c
	drivers/net/vxlan.c

All three conflicts were cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23 00:09:14 -05:00
Andrew Lunn 1bc4e2b000 batman-adv: Avoid endless loop in bat-on-bat netdevice check
batman-adv checks in different situation if a new device is already on top
of a different batman-adv device. This is done by getting the iflink of a
device and all its parent. It assumes that this iflink is always a parent
device in an acyclic graph. But this assumption is broken by devices like
veth which are actually a pair of two devices linked to each other. The
recursive check would therefore get veth0 when calling dev_get_iflink on
veth1. And it gets veth0 when calling dev_get_iflink with veth1.

Creating a veth pair and loading batman-adv freezes parts of the system

    ip link add veth0 type veth peer name veth1
    modprobe batman-adv

An RCU stall will be detected on the system which cannot be fixed.

    INFO: rcu_sched self-detected stall on CPU
            1: (5264 ticks this GP) idle=3e9/140000000000001/0
    softirq=144683/144686 fqs=5249
             (t=5250 jiffies g=46 c=45 q=43)
    Task dump for CPU 1:
    insmod          R  running task        0   247    245 0x00000008
     ffffffff8151f140 ffffffff8107888e ffff88000fd141c0 ffffffff8151f140
     0000000000000000 ffffffff81552df0 ffffffff8107b420 0000000000000001
     ffff88000e3fa700 ffffffff81540b00 ffffffff8107d667 0000000000000001
    Call Trace:
     <IRQ>  [<ffffffff8107888e>] ? rcu_dump_cpu_stacks+0x7e/0xd0
     [<ffffffff8107b420>] ? rcu_check_callbacks+0x3f0/0x6b0
     [<ffffffff8107d667>] ? hrtimer_run_queues+0x47/0x180
     [<ffffffff8107cf9d>] ? update_process_times+0x2d/0x50
     [<ffffffff810873fb>] ? tick_handle_periodic+0x1b/0x60
     [<ffffffff810290ae>] ? smp_trace_apic_timer_interrupt+0x5e/0x90
     [<ffffffff813bbae2>] ? apic_timer_interrupt+0x82/0x90
     <EOI>  [<ffffffff812c3fd7>] ? __dev_get_by_index+0x37/0x40
     [<ffffffffa0031f3e>] ? batadv_hard_if_event+0xee/0x3a0 [batman_adv]
     [<ffffffff812c5801>] ? register_netdevice_notifier+0x81/0x1a0
    [...]

This can be avoided by checking if two devices are each others parent and
stopping the check in this situation.

Fixes: b7eddd0b39 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[sven@narfation.org: rewritten description, extracted fix]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-16 22:16:33 +08:00
Sven Eckelmann 3db152093e batman-adv: Only put orig_node_vlan list reference when removed
The batadv_orig_node_vlan reference counter in batadv_tt_global_size_mod
can only be reduced when the list entry was actually removed. Otherwise the
reference counter may reach zero when batadv_tt_global_size_mod is called
from two different contexts for the same orig_node_vlan but only one
context is actually removing the entry from the list.

The release function for this orig_node_vlan is not called inside the
vlan_list_lock spinlock protected region because the function
batadv_tt_global_size_mod still holds a orig_node_vlan reference for the
object pointer on the stack. Thus the actual release function (when
required) will be called only at the end of the function.

Fixes: 7ea7b4a142 ("batman-adv: make the TT CRC logic VLAN specific")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-16 17:52:26 +08:00
Sven Eckelmann c18bdd018e batman-adv: Only put gw_node list reference when removed
The batadv_gw_node reference counter in batadv_gw_node_update can only be
reduced when the list entry was actually removed. Otherwise the reference
counter may reach zero when batadv_gw_node_update is called from two
different contexts for the same gw_node but only one context is actually
removing the entry from the list.

The release function for this gw_node is not called inside the list_lock
spinlock protected region because the function batadv_gw_node_update still
holds a gw_node reference for the object pointer on the stack. Thus the
actual release function (when required) will be called only at the end of
the function.

Fixes: bd3524c14b ("batman-adv: remove obsolete deleted attribute for gateway node")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-16 17:52:25 +08:00
Sven Eckelmann 92dcdf09a1 batman-adv: Convert batadv_tt_common_entry to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:06 +08:00
Sven Eckelmann 7c12439115 batman-adv: Convert batadv_orig_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:06 +08:00
Sven Eckelmann 161a3be932 batman-adv: Convert batadv_orig_node_vlan to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:05 +08:00
Sven Eckelmann 7a659d5694 batman-adv: Convert batadv_hard_iface to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:05 +08:00
Sven Eckelmann 77ae32e898 batman-adv: Convert batadv_neigh_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:04 +08:00
Sven Eckelmann a6ba0d340d batman-adv: Convert batadv_orig_ifinfo to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:04 +08:00
Sven Eckelmann 962c68328b batman-adv: Convert batadv_neigh_ifinfo to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:03 +08:00
Sven Eckelmann 6e8ef69dd4 batman-adv: Convert batadv_tt_orig_list_entry to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:03 +08:00
Sven Eckelmann 32836f56f8 batman-adv: Convert batadv_tvlv_handler to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:03 +08:00
Sven Eckelmann f7157dd135 batman-adv: Convert batadv_tvlv_container to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:02 +08:00
Sven Eckelmann 68a6722cc4 batman-adv: Convert batadv_dat_entry to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:02 +08:00
Sven Eckelmann 727e0cd59e batman-adv: Convert batadv_nc_path to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:01 +08:00
Sven Eckelmann daf99b4810 batman-adv: Convert batadv_nc_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:01 +08:00
Sven Eckelmann 71b7e3d316 batman-adv: Convert batadv_bla_claim to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:00 +08:00
Sven Eckelmann 06e56ded86 batman-adv: Convert batadv_bla_backbone_gw to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:00 +08:00
Sven Eckelmann 6be4d30c18 batman-adv: Convert batadv_softif_vlan to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:59 +08:00
Sven Eckelmann e7aed321b8 batman-adv: Convert batadv_gw_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:59 +08:00
Sven Eckelmann 90f564dff4 batman-adv: Convert batadv_hardif_neigh_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:58 +08:00
Sven Eckelmann dded069224 batman-adv: Add lockdep assert for container_list_lock
The batadv_tvlv_container* functions state in their kernel-doc that they
require tvlv.container_list_lock. Add an assert to automatically detect
when this might have been ignored by the caller.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:58 +08:00
Simon Wunderlich 81f0268350 batman-adv: add seqno maximum age and protection start flag parameters
To allow future use of the window protected function with different
maximum sequence numbers, add a parameter to set this value which
was previously hardcoded. Another parameter added for future use is a
flag to return whether the protection window has started.

While at it, also fix the kerneldoc.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:57 +08:00
Sven Eckelmann 140ed8e87c batman-adv: Drop reference to netdevice on last reference
The references to the network device should be dropped inside the release
function for batadv_hard_iface similar to what is done with the batman-adv
internal datastructures.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:57 +08:00
Sven Eckelmann 7b5e739619 batman-adv: Switch to HTTPS version of links
open-mesh.org and its subdomains can only be accessed via HTTPS. HTTP-only
requests are currently redirected automatically to HTTPS but references in
the source code should be only https.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-03 09:54:39 +08:00
Sven Eckelmann 0046b0402a batman-adv: update copyright years for 2016
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:55:10 +08:00
Sven Eckelmann ec9b83ca5f batman-adv: Fix kernel-doc for batadv_claim_free_ref
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:55:09 +08:00
Simon Wunderlich 600184b705 batman-adv: add kerneldoc for batadv_iv_ogm_aggr_packet
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:55:09 +08:00
Antonio Quartulli a14c131d8c batman-adv: add kernel doc for AP isolation attributes in bat_priv
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:34 +08:00
Antonio Quartulli d15cd6221c batman-adv: fix kerneldoc for TT functions
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:33 +08:00
Antonio Quartulli fe13c2aadf batman-adv: fix kerneldoc for DAT functions
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:33 +08:00
Simon Wunderlich 04e14be65b batman-adv: Update/repair bridge loop avoidance kerneldoc
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:32 +08:00
Sven Eckelmann 672e797850 batman-adv: Fix kerneldoc of network-coding functions
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:32 +08:00
Sven Eckelmann 7afcbbef64 batman-adv: Fix kerneldoc of main functions
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:31 +08:00
Sven Eckelmann 62fe710f6e batman-adv: Fix kerneldoc parsing of return description
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:31 +08:00
Marek Lindner d1f6825067 batman-adv: kernel doc readability updates
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:30 +08:00
Sven Eckelmann f34ac9d4ec batman-adv: Drop invalid kerneldoc for variable batadv_vlan_attrs
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:29 +08:00
Sven Eckelmann e51f0397de batman-adv: Fix names in kerneldoc of functions
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:29 +08:00
Sven Eckelmann 42ea22fe2c batman-adv: Remove kerneldoc for missing parameters
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:28 +08:00
Sven Eckelmann 6f68b00271 batman-adv: Fix kerneldoc parsing of structs/enums
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:40:28 +08:00
Sven Eckelmann 42eff6a617 batman-adv: Drop immediate orig_node free function
It is not allowed to free the memory of an object which is part of a list
which is protected by rcu-read-side-critical sections without making sure
that no other context is accessing the object anymore. This usually happens
by removing the references to this object and then waiting until the rcu
grace period is over and no one (allowedly) accesses it anymore.

But the _now functions ignore this completely. They free the object
directly even when a different context still tries to access it. This has
to be avoided and thus these functions must be removed and all functions
have to use batadv_orig_node_free_ref.

Fixes: 72822225bd ("batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:50:00 +08:00
Sven Eckelmann b4d922cfc9 batman-adv: Drop immediate batadv_hard_iface free function
It is not allowed to free the memory of an object which is part of a list
which is protected by rcu-read-side-critical sections without making sure
that no other context is accessing the object anymore. This usually happens
by removing the references to this object and then waiting until the rcu
grace period is over and no one (allowedly) accesses it anymore.

But the _now functions ignore this completely. They free the object
directly even when a different context still tries to access it. This has
to be avoided and thus these functions must be removed and all functions
have to use batadv_hardif_free_ref.

Fixes: 89652331c0 ("batman-adv: split tq information in neigh_node struct")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:49:51 +08:00
Sven Eckelmann ae3e1e36e3 batman-adv: Drop immediate neigh_ifinfo free function
It is not allowed to free the memory of an object which is part of a list
which is protected by rcu-read-side-critical sections without making sure
that no other context is accessing the object anymore. This usually happens
by removing the references to this object and then waiting until the rcu
grace period is over and no one (allowedly) accesses it anymore.

But the _now functions ignore this completely. They free the object
directly even when a different context still tries to access it. This has
to be avoided and thus these functions must be removed and all functions
have to use batadv_neigh_ifinfo_free_ref.

Fixes: 89652331c0 ("batman-adv: split tq information in neigh_node struct")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:49:38 +08:00
Sven Eckelmann f638969287 batman-adv: Drop immediate batadv_hardif_neigh_node free function
It is not allowed to free the memory of an object which is part of a list
which is protected by rcu-read-side-critical sections without making sure
that no other context is accessing the object anymore. This usually happens
by removing the references to this object and then waiting until the rcu
grace period is over and no one (allowedly) accesses it anymore.

But the _now functions ignore this completely. They free the object
directly even when a different context still tries to access it. This has
to be avoided and thus these functions must be removed and all functions
have to use batadv_hardif_neigh_free_ref.

Fixes: cef63419f7 ("batman-adv: add list of unique single hop neighbors per hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:49:28 +08:00
Sven Eckelmann 2baa753c27 batman-adv: Drop immediate batadv_neigh_node free function
It is not allowed to free the memory of an object which is part of a list
which is protected by rcu-read-side-critical sections without making sure
that no other context is accessing the object anymore. This usually happens
by removing the references to this object and then waiting until the rcu
grace period is over and no one (allowedly) accesses it anymore.

But the _now functions ignore this completely. They free the object
directly even when a different context still tries to access it. This has
to be avoided and thus these functions must be removed and all functions
have to use batadv_neigh_node_free_ref.

Fixes: 89652331c0 ("batman-adv: split tq information in neigh_node struct")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:49:16 +08:00
Sven Eckelmann deed96605f batman-adv: Drop immediate batadv_orig_ifinfo free function
It is not allowed to free the memory of an object which is part of a list
which is protected by rcu-read-side-critical sections without making sure
that no other context is accessing the object anymore. This usually happens
by removing the references to this object and then waiting until the rcu
grace period is over and no one (allowedly) accesses it anymore.

But the _now functions ignore this completely. They free the object
directly even when a different context still tries to access it. This has
to be avoided and thus these functions must be removed and all functions
have to use batadv_orig_ifinfo_free_ref.

Fixes: 7351a4822d ("batman-adv: split out router from orig_node")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:49:05 +08:00
Sven Eckelmann 44e8e7e91d batman-adv: Avoid recursive call_rcu for batadv_nc_node
The batadv_nc_node_free_ref function uses call_rcu to delay the free of the
batadv_nc_node object until no (already started) rcu_read_lock is enabled
anymore. This makes sure that no context is still trying to access the
object which should be removed. But batadv_nc_node also contains a
reference to orig_node which must be removed.

The reference drop of orig_node was done in the call_rcu function
batadv_nc_node_free_rcu but should actually be done in the
batadv_nc_node_release function to avoid nested call_rcus. This is
important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will
not detect the inner call_rcu as relevant for its execution. Otherwise this
barrier will most likely be inserted in the queue before the callback of
the first call_rcu was executed. The caller of rcu_barrier will therefore
continue to run before the inner call_rcu callback finished.

Fixes: d56b1705e2 ("batman-adv: network coding - detect coding nodes and remove these after timeout")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:48:41 +08:00
Sven Eckelmann 63b3992722 batman-adv: Avoid recursive call_rcu for batadv_bla_claim
The batadv_claim_free_ref function uses call_rcu to delay the free of the
batadv_bla_claim object until no (already started) rcu_read_lock is enabled
anymore. This makes sure that no context is still trying to access the
object which should be removed. But batadv_bla_claim also contains a
reference to backbone_gw which must be removed.

The reference drop of backbone_gw was done in the call_rcu function
batadv_claim_free_rcu but should actually be done in the
batadv_claim_release function to avoid nested call_rcus. This is important
because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not
detect the inner call_rcu as relevant for its execution. Otherwise this
barrier will most likely be inserted in the queue before the callback of
the first call_rcu was executed. The caller of rcu_barrier will therefore
continue to run before the inner call_rcu callback finished.

Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-16 22:48:29 +08:00
Sven Eckelmann bab7c6c3de batman-adv: Fix list removal of batadv_hardif_neigh_node
The neigh_list with batadv_hardif_neigh_node objects is accessed with only
rcu_read_lock in batadv_hardif_neigh_get and batadv_iv_neigh_print. Thus it
is not allowed to kfree the object before the rcu grace period ends (which
may still protects context accessing this object). Therefore the object has
first to be removed from the neigh_list and then it has either wait with
synchronize_rcu or call_rcu till the grace period ends before it can be
freed.

Fixes: cef63419f7 ("batman-adv: add list of unique single hop neighbors per hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-13 19:28:27 +08:00
Simon Wunderlich af63cf51b7 batman-adv: fix lockdep splat when doing mcast_free
While testing, we got something like this:

WARNING: CPU: 0 PID: 238 at net/batman-adv/multicast.c:142 batadv_mcast_mla_tt_retract+0x94/0x205 [batman_adv]()
[...]
Call Trace:
[<ffffffff815fc597>] dump_stack+0x4b/0x64
[<ffffffff810b34dc>] warn_slowpath_common+0xbc/0x120
[<ffffffffa0024ec5>] ? batadv_mcast_mla_tt_retract+0x94/0x205 [batman_adv]
[<ffffffff810b3705>] warn_slowpath_null+0x15/0x20
[<ffffffffa0024ec5>] batadv_mcast_mla_tt_retract+0x94/0x205 [batman_adv]
[<ffffffffa00273fe>] batadv_mcast_free+0x36/0x39 [batman_adv]
[<ffffffffa0020c77>] batadv_mesh_free+0x7d/0x13f [batman_adv]
[<ffffffffa0036a6b>] batadv_softif_free+0x15/0x25 [batman_adv]
[...]

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-13 19:26:25 +08:00
David S. Miller 9d367eddf3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/bonding/bond_main.c
	drivers/net/ethernet/mellanox/mlxsw/spectrum.h
	drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c

The bond_main.c and mellanox switch conflicts were cases of
overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11 23:55:43 -05:00
Sven Eckelmann ed21d170e8 batman-adv: Add kerneldoc for batadv_neigh_node::refcount
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Sven Eckelmann 8a3719a184 batman-adv: Remove kerneldoc for missing struct members
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Sven Eckelmann 006a199d5d batman-adv: Fix kerneldoc member names in for main structs
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Sven Eckelmann 426fc6c811 batman-adv: Fix kernel-doc parsing of main structs
kernel-doc is not able to skip an #ifdef between the kernel documentation
block and the start of the struct. Moving the #ifdef before the kernel doc
block avoids this problem

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Markus Elfring e087f34f28 batman-adv: Split a condition check
Let us split a check for a condition at the beginning of the
batadv_is_ap_isolated() function so that a direct return can be performed
in this function if the variable "vlan" contained a null pointer.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Markus Elfring f75a33aeed batman-adv: Delete an unnecessary check before the function call "batadv_softif_vlan_free_ref"
The batadv_softif_vlan_free_ref() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Markus Elfring 8bbb7cb232 batman-adv: Less checks in batadv_tvlv_unicast_send()
* Let us return directly if a call of the batadv_orig_hash_find() function
  returned a null pointer.

* Omit the initialisation for the variable "skb" at the beginning.

* Replace an assignment by a call of the kfree_skb() function
  and delete the affected variable "ret" then.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Markus Elfring c799443ee1 batman-adv: Delete unnecessary checks before the function call "kfree_skb"
The kfree_skb() function tests whether its argument is NULL and then
returns immediately. Thus the test around the calls is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Sven Eckelmann d737ccbed3 batman-adv: Add function to convert string to batadv throughput
The code to convert the throughput information from a string to the
batman-adv internal (100Kibit/s) representation is duplicated in
batadv_parse_gw_bandwidth. Move this functionality to its own function
batadv_parse_throughput to reduce the code complexity.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Simon Wunderlich 9e728e8438 batman-adv: only call post function if something changed
Currently, the post function is also called on errors or if there were
no changes, which is redundant for the functions currently using these
facilities.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Simon Wunderlich e1544f3c87 batman-adv: increase BLA wait periods to 6
If networks take a long time to come up, e.g. due to lossy links, then
the bridge loop avoidance wait time to suppress broadcasts may not wait
long enough and detect a backbone before the mesh is brought up.
Increasing the wait period further to 60 seconds makes this scenario
less likely.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Simon Wunderlich d68081a240 batman-adv: purge bridge loop avoidance when its disabled
When bridge loop avoidance is disabled through sysfs, the internal
datastructures are not disabled, but only BLA operations are disabled.
To be sure that they are removed, purge the data immediately. That is
especially useful if a firmwares network state is changed, and the BLA
wait periods should restart on the new network.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Marek Lindner 143d157c9e batman-adv: remove leftovers of unused BATADV_PRIMARIES_FIRST_HOP flag
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Sven Eckelmann 008a374487 batman-adv: Fix lockdep annotation of batadv_tlv_container_remove
The function handles tlv containers and not tlv handlers. Thus the
lockdep_assert_held has to check for the container_list lock.

Fixes: 2c72d655b0 ("batman-adv: Annotate deleting functions with external lock via lockdep")
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Simon Wunderlich 4a4d045eb2 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09 20:56:00 +08:00
Sven Eckelmann 13bbdd370f batman-adv: Fix invalid read while copying bat_iv.bcast_own
batadv_iv_ogm_orig_del_if removes a part of the bcast_own which previously
belonged to the now removed interface. This is done by copying all data
which comes before the removed interface and then appending all the data
which comes after the removed interface.

The address calculation for the position of the data which comes after the
removed interface assumed that the bat_iv.bcast_own is a pointer to a
single byte datatype. But it is a pointer to unsigned long and thus the
calculated position was wrong off factor sizeof(unsigned long).

Fixes: 83a8342678a0 ("more basic routing code added (forwarding packets /
bitarray added)")

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-07 14:24:05 +08:00
David S. Miller b3e0d3d7ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17 22:08:28 -05:00
Simon Wunderlich 5a1dd8a477 batman-adv: lock crc access in bridge loop avoidance
We have found some networks in which nodes were constantly requesting
other nodes BLA claim tables to synchronize, just to ask for that again
once completed. The reason was that the crc checksum of the asked nodes
were out of sync due to missing locking and multiple writes to the same
crc checksum when adding/removing entries. Therefore the asked nodes
constantly reported the wrong crc, which caused repeating requests.

To avoid multiple functions changing a backbone gateways crc entry at
the same time, lock it using a spinlock.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Tested-by: Alfons Name <AlfonsName@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 15:17:09 +08:00
Sven Eckelmann c05a57f6fb batman-adv: Fix typo 'wether' -> 'whether'
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 15:17:09 +08:00
Sven Eckelmann 01f6b5c76a batman-adv: Use chain pointer when purging fragments
The chain pointer was already created in batadv_frag_purge_orig to make the
checks more readable. Just use the chain pointer everywhere instead of
having the same dereference + array access in the most lines of this
function.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 15:17:09 +08:00
Simon Wunderlich ad7e2c466d batman-adv: unify flags access style in tt global add
This should slightly improve readability

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 15:17:08 +08:00
Simon Wunderlich c169c59dd5 batman-adv: detect local excess vlans in TT request
If the local representation of the global TT table of one originator has
more VLAN entries than the respective TT update, there is some
inconsistency present. By detecting and reporting this inconsistency,
the global table gets updated and the excess VLAN will get removed in
the process.

Reported-by: Alessandro Bolletta <alessandro@mediaspot.net>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 15:17:08 +08:00
Simon Wunderlich 18165f6f65 batman-adv: rename equiv/equal or better to similar or better
Since the function applies a threshold and also slightly worse
values are accepted, ''equal or better'' does not represent the
intention of the function. ''Similar or better'' represents that better.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 00:21:42 +08:00
Marek Lindner 4ff1e2a738 batman-adv: update last seen field of single hop originators
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 00:21:42 +08:00
Marek Lindner 7587405ab9 batman-adv: export single hop neighbor list via debugfs
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 00:21:42 +08:00
Marek Lindner 8248a4c7c8 batman-adv: add bat_hardif_neigh_init algo ops call
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 00:21:41 +08:00
Marek Lindner cef63419f7 batman-adv: add list of unique single hop neighbors per hard-interface
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-16 00:21:41 +08:00
Sven Eckelmann b7fe3d4f4a batman-adv: Fix invalid stack access in batadv_dat_select_candidates
batadv_dat_select_candidates provides an u32 to batadv_hash_dat but it
needs a batadv_dat_entry with at least ip and vid filled in.

Fixes: 3e26722bc9f2 ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-07 22:40:21 +08:00
Marek Lindner 4c71895830 batman-adv: fix erroneous client entry duplicate detection
The translation table implementation, namely batadv_compare_tt(),
is used to compare two client entries and deciding if they are the
holding the same information. Each client entry is identified by
its mac address and its VLAN id (VID).
Consequently, batadv_compare_tt() has to not only compare the mac
addresses but also the VIDs.

Without this fix adding a new client entry that possesses the same
mac address as another client but operates on a different VID will
fail because both client entries will considered identical.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-07 22:40:21 +08:00
Simon Wunderlich a6cb390940 batman-adv: avoid keeping false temporary entry
In the case when a temporary entry is added first and a proper tt entry
is added after that, the temporary tt entry is kept in the orig list.
However the temporary flag is removed at this point, and therefore the
purge function can not find this temporary entry anymore.

Therefore, remove the previous temp entry before adding the new proper
one.

This case can happen if a client behind a given originator moves before
the TT announcement is sent out. Other than that, this case can also be
created by bogus or malicious payload frames for VLANs which are not
existent on the sending originator.

Reported-by: Alessandro Bolletta <alessandro@mediaspot.net>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-07 21:58:14 +08:00
Simon Wunderlich 437bb0e645 batman-adv: fix speedy join for DAT cache replies
DAT Cache replies are answered on behalf of other clients which are not
connected to the answering originator. Therefore, we shouldn't add these
clients to the answering originators TT table through speed join to
avoid bogus entries.

Reported-by: Alessandro Bolletta <alessandro@mediaspot.net>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-12-07 21:58:14 +08:00
Andrew Lunn a1a66b1100 batman-adv: Act on NETDEV_*_TYPE_CHANGE events
A network interface can change type. It may change from a type which
batman does not support, e.g. hdlc, to one it does, e.g. hdlc-eth.
When an interface changes type, it sends two notifications. Handle
these notifications.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05 17:41:42 -05:00
Jiri Pirko 29bf24afb2 net: add possibility to pass information about upper device via notifier
Sometimes the drivers and other code would find it handy to know some
internal information about upper device being changed. So allow upper-code
to pass information down to notifier listeners during linking.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:25 -05:00
Jiri Pirko 6dffb0447c net: propagate upper priv via netdev_master_upper_dev_link
Eliminate netdev_master_upper_dev_link_private and pass priv directly as
a parameter of netdev_master_upper_dev_link.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:25 -05:00
Marek Lindner ed29266347 batman-adv: turn batadv_neigh_node_get() into local function
commit c214ebe1eb29 ("batman-adv: move neigh_node list add into
batadv_neigh_node_new()") removed external calls to
batadv_neigh_node_get().

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:34 +02:00
Sven Eckelmann 7bca68c784 batman-adv: Add lower layer needed_(head|tail)room to own ones
The maximum of hard_header_len and maximum of all needed_(head|tail)room of
all slave interfaces of a batman-adv device must be used to define the
batman-adv device needed_(head|tail)room. This is required to avoid too
small buffer problems when these slave devices try to send the encapsulated
packet in a tx path without the possibility to resize the skbuff.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:34 +02:00
Antonio Quartulli a5256f7e74 batman-adv: don't access unregistered net_device object
In batadv_hardif_disable_interface() there is a call to
batadv_softif_destroy_sysfs() which in turns invokes
unregister_netdevice() on the soft_iface.
After this point we cannot rely on the soft_iface object
anymore because it might get free'd by the netdev periodic
routine at any time.

For this reason the netdev_upper_dev_unlink(.., soft_iface) call
is moved before the invocation of batadv_softif_destroy_sysfs() so
that we can be sure that the soft_iface object is still valid.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-08-27 20:15:33 +02:00
Simon Wunderlich 07c48eca16 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:33 +02:00
Simon Wunderlich 1e3b4669e7 batman-adv: fix gateway client style issues
commit 0511575c4d03 ("batman-adv: remove obsolete deleted attribute for
gateway node") incorrectly added an empy line and forgot to remove an
include.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:32 +02:00
Marek Lindner 3f32f8a687 batman-adv: rearrange batadv_neigh_node_new() arguments to follow convention
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:32 +02:00
Simon Wunderlich bd3524c14b batman-adv: remove obsolete deleted attribute for gateway node
With rcu, the gateway node deleted attribute is not needed anymore. In
fact, it may delay the free of the gateway node and its referenced
structures. Therefore remove it altogether and simplify purging as well.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:32 +02:00
Marek Lindner 741aa06bfb batman-adv: move neigh_node list add into batadv_neigh_node_new()
All batadv_neigh_node_* functions expect the neigh_node list item to be part
of the orig_node->neigh_list, therefore the constructor of said list item
should be adding the newly created neigh_node to the respective list.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:31 +02:00
Marek Lindner 39bf7618f0 batman-adv: remove redundant hard_iface assignment
The batadv_neigh_node_new() function already sets the hard_iface pointer.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:31 +02:00
Marek Lindner f729dc70da batman-adv: move hardif refcount inc to batadv_neigh_node_new()
The batadv_neigh_node cleanup function 'batadv_neigh_node_free_rcu()'
takes care of reducing the hardif refcounter, hence it's only logical
to assume the creating function of that same object
'batadv_neigh_node_new()' takes care of increasing the same refcounter.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27 20:15:30 +02:00
Marek Lindner 854d2a63de batman-adv: beautify supported routing algorithm list
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:24 +02:00
Sven Eckelmann 87b40f534d batman-adv: Fix conditional statements indentation
commit 29b9256e6631 ("batman-adv: consider outgoing interface in OGM
sending") incorrectly indented the interface check code.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:24 +02:00
Sven Eckelmann 5274cd68d7 batman-adv: Add lockdep_asserts for documented external locks
Some functions already have documentation about locks they require inside
their kerneldoc header. These can be directly tested during runtime using
the lockdep asserts.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:23 +02:00
Sven Eckelmann 2c72d655b0 batman-adv: Annotate deleting functions with external lock via lockdep
Functions which use (h)list_del* are requiring correct locking when they
operate on global lists. Most of the time the search in the list and the
delete are done in the same function. All other cases should have it
visible that they require a special lock to avoid race conditions.

Lockdep asserts can be used to check these problem during runtime when the
lockdep functionality is enabled.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:23 +02:00
Marek Lindner 7c26a53ba5 batman-adv: convert bat_priv->tt.req_list to hlist
Since the list's tail is never accessed using a double linked list head
wastes memory.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:22 +02:00
Sven Eckelmann 0b8336f5fc batman-adv: Fix gw_bandwidth calculation on 32 bit systems
The TVLV for the gw_bandwidth stores everything as u32. But the
gw_bandwidth reads the signed long which limits the maximum value to
(2 ** 31 - 1) on systems with 4 byte long. Also the input value is always
converted from either Mibit/s or Kibit/s to 100Kibit/s. This reduces the
values even further when the user sets it via the default unit Kibit/s. It
may even cause an integer overflow and end up with a value the user never
intended.

Instead read the values as u64, check for possible overflows, do the unit
adjustments and then reduce the size to u32.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:22 +02:00
Sven Eckelmann 77927b7d9d batman-adv: Return EINVAL on invalid gw_bandwidth change
Invalid speed settings by the user are currently acknowledged as correct
but not stored. Instead the return of the store operation of the file
"gw_bandwidth" should indicate that the given value is not acceptable.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:21 +02:00
Marek Lindner a121048a89 batman-adv: prevent potential hlist double deletion
The hlist_del_rcu() call in batadv_tt_global_size_mod() does not check
if the element still is part of the list prior to deletion. The atomic
list counter should prevent the worst but converting to
hlist_del_init_rcu() ensures the element can't be deleted more than
once.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:21 +02:00
Marek Lindner d0fa4f3f5b batman-adv: convert orig_node->vlan_list to hlist
Since the list's tail is never accessed using a double linked list head
wastes memory.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:20 +02:00
Sven Eckelmann 2bdd1888f1 batman-adv: Remove batadv_ types forward declarations
main.h is included in every file and is the only way to access types.h.
This makes forward declarations for all types defined in types.h
unnecessary.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:20 +02:00
Marek Lindner 383b863620 batman-adv: rename batadv_new_tt_req_node to batadv_tt_req_node_new
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:19 +02:00
Marek Lindner 433ff98f3f batman-adv: update kernel doc of batadv_tt_global_del_orig_entry()
The updated kernel doc & additional comment shall prevent accidental
copy & paste errors or calling the function without the required
precautions.

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:19 +02:00
Sven Eckelmann 4f248cff9e batman-adv: Remove multiple assignment per line
The Linux CodingStyle disallows multiple assignments in a single line.
(see chapter 1)

Reported-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:18 +02:00
Sven Eckelmann 34473822da batman-adv: Fix kerneldoc over 80 column lines
Kerneldoc required single line documentation in the past (before 2009).
Therefore, the 80 columns limit per line check of checkpatch was disabled
for kerneldoc. But kerneldoc is not excluded anymore from it and checkpatch
now enabled the check again.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:18 +02:00
Sven Eckelmann 6b5e971a28 batman-adv: Replace C99 int types with kernel type
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the
standard C99 types u?int(8|16|32|64)_t are objected by some people and even
checkpatch now warns about using them.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:17 +02:00
David S. Miller dc25b25897 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/qmi_wwan.c

Overlapping additions of new device IDs to qmi_wwan.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-21 11:44:04 -07:00
Sven Eckelmann fd7dec25a1 batman-adv: Fix memory leak on tt add with invalid vlan
The object tt_local is allocated with kmalloc and not initialized when the
function batadv_tt_local_add checks for the vlan. But this function can
only cleanup the object when the (not yet initialized) reference counter of
the object is 1. This is unlikely and thus the object would leak when the
vlan could not be found.

Instead the uninitialized object tt_local has to be freed manually and the
pointer has to set to NULL to avoid calling the function which would try to
decrement the reference counter of the not existing object.

CID: 1316518
Fixes: 354136bcc3 ("batman-adv: fix kernel crash due to missing NULL checks")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 19:08:23 -07:00
Phil Sutter cdf7370391 net: batman-adv: convert to using IFF_NO_QUEUE
Signed-off-by: Phil Sutter <phil@nwl.cc>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 11:55:07 -07:00
David S. Miller c1f066d4ee Included changes:
- avoid integer overflow in GW selection routine
 - prevent race condition by making capability bit changes atomic (use
   clear/set/test_bit)
 - fix synchronization issue in mcast tvlv handler
 - fix crash on double list removal of TT Request objects
 - fix leak by puring packets enqueued for sending upon iface removal
 - ensure network header pointer is set in skb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVzlUGAAoJEOb/4TMchkvfy9EQAJ0DBKdTqiuWwNQzZ9ghCeLi
 Njgwyq4WdvZXp8vIj9cq0AR1JsFvH9fGp4BlLE8pGsQyxURiWQmR/Jurvb0UGMhM
 SPVvl/b0nnCrRu937UcVEiq6wRrFwEr1fYfL45fY0c1eTkXSu/54iEURDvWlkpyX
 COB4cuydoPY6O2LGiPRsGlOGTYbQ/u89G1HyxFr9Ch2IVRMPVXB6zuI7puuEg2ee
 EwgI2IGO/GHHaScbXQpVy+bL6XL/OcQ4nCrYeaNpwbOKAOfGabNzfVncSCLRKMSW
 jZh5D3cG3AKGUPeooEtd8yGgNG3SSVNTXt7CL+WOM7/2EKvYeNdJFaQzbdZQEtT0
 begOcUJ2K0yas/iExqYXtEPFCWXhjuzrb4u6wu5psGgu3zt1nltpCkplDEMcSEia
 C+dYE5r/JM2S1lsFclnjz+rBXu4ZfCUvV0q+50+lGiWPhfemM2M2XqJNcay0ioSm
 radSwMe549sh6r3ajwdxF5z66tU94PERMMxVxJ9Z3gmHUZ56phxEe6X0xBO91bhW
 aSCcFr6PQMxmfwanLj5Ydxm5MPHdDXF84YPMTFcGb4ya9ZWWURGNq7Sr85Ek7N6W
 5DIA8F8/vsgaXYUn011aBu4q1mm5ZsTs9nR3MAxchAuuu3sTBOkd/BecS4T7CEOE
 IHnbxsJxXReJ/aCQFoks
 =ZEuN
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
Included changes:
- avoid integer overflow in GW selection routine
- prevent race condition by making capability bit changes atomic (use
  clear/set/test_bit)
- fix synchronization issue in mcast tvlv handler
- fix crash on double list removal of TT Request objects
- fix leak by puring packets enqueued for sending upon iface removal
- ensure network header pointer is set in skb
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-17 14:31:42 -07:00
Linus Lüssing 53cf037bf8 batman-adv: Fix potentially broken skb network header access
The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They
need a correctly set skb network header.

Unfortunately we cannot rely on the device drivers to set it for us.
Therefore setting it in the beginning of the according ndo_start_xmit
handler.

Fixes: 1d8ab8d3c1 ("batman-adv: Modified forwarding behaviour for multicast packets")
Fixes: ab49886e3d ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:52:10 +02:00
Simon Wunderlich 3f1e08d0ae batman-adv: remove broadcast packets scheduled for purged outgoing if
When an interface is purged, the broadcast packets scheduled for this
interface should get purged as well.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:52:09 +02:00
Marek Lindner 1f15510164 batman-adv: protect tt request from double deletion
The list_del() calls were changed to list_del_init() to prevent
an accidental double deletion in batadv_tt_req_node_new().

Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:52:09 +02:00
Linus Lüssing 8a4023c5b5 batman-adv: Fix potential synchronization issues in mcast tvlv handler
So far the mcast tvlv handler did not anticipate the processing of
multiple incoming OGMs from the same originator at the same time. This
can lead to various issues:

* Broken refcounting: For instance two mcast handlers might both assume
  that an originator just got multicast capabilities and will together
  wrongly decrease mcast.num_disabled by two, potentially leading to
  an integer underflow.

* Potential kernel panic on hlist_del_rcu(): Two mcast handlers might
  one after another try to do an
  hlist_del_rcu(&orig->mcast_want_all_*_node). The second one will
  cause memory corruption / crashes.
  (Reported by: Sven Eckelmann <sven@narfation.org>)

Right in the beginning the code path makes assumptions about the current
multicast related state of an originator and bases all updates on that. The
easiest and least error prune way to fix the issues in this case is to
serialize multiple mcast handler invocations with a spinlock.

Fixes: 60432d756c ("batman-adv: Announce new capability via multicast TVLV")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:52:08 +02:00
Linus Lüssing 9c936e3f4c batman-adv: Make MCAST capability changes atomic
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One
OGM handler might undo the set/clear of a specific bit from another
handler run in between.

Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions.

Fixes: 60432d756c ("batman-adv: Announce new capability via multicast TVLV")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:51:40 +02:00
Linus Lüssing ac4eebd484 batman-adv: Make TT capability changes atomic
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One
OGM handler might undo the set/clear of a specific bit from another
handler run in between.

Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions.

Fixes: e17931d1a6 ("batman-adv: introduce capability initialization bitfield")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:50:43 +02:00
Linus Lüssing 4635469f5c batman-adv: Make NC capability changes atomic
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One
OGM handler might undo the set/clear of a specific bit from another
handler run in between.

Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions.

Fixes: 3f4841ffb3 ("batman-adv: tvlv - add network coding container")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:50:43 +02:00
Linus Lüssing 65d7d46050 batman-adv: Make DAT capability changes atomic
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One
OGM handler might undo the set/clear of a specific bit from another
handler run in between.

Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions.

Fixes: 17cf0ea455 ("batman-adv: tvlv - add distributed arp table container")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-14 22:50:42 +02:00
Ruben Wisniewski 571a963768 batman-adv: Avoid u32 overflow during gateway select
The gateway selection based on fast connections is using a single value
calculated from the average tq (0-255) and the download bandwidth (in
100Kibit). The formula for the first step (tq ** 2 * 10000 * bandwidth)
tends to overflow a u32 with low bandwidth settings like 50 [100KiBit]
and a tq value of over 92.

Changing this to a 64 bit unsigned integer allows to support a
bandwidth_down with up to ~2.8e10 [100KiBit] and a perfect tq of 255. This
is ~6.6 times higher than the maximum possible value of the gateway
announcement TVLV.

This problem only affects the non-default gw_sel_class 1.

Signed-off-by: Ruben Wisniewsi <ruben@vfn-nrw.de>
[sven@narfation.org: rewritten commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-11 18:10:04 +02:00
Sven Eckelmann e071d93eb4 batman-adv: Replace gw_reselect divisor with simple shift
The gw_factor is divided by BATADV_TQ_LOCAL_WINDOW_SIZE ** 2 * 64. But the
rest of the calculation has nothing to do with the tq window size and
therefore the calculation is just (tmp_gw_factor / (64 ** 3)).

Replace it with a simple shift to avoid a costly 64-bit divide when the
max_gw_factor is changed from u32 to u64. This type change is necessary
to avoid an overflow bug.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-11 18:10:04 +02:00
Simon Wunderlich 27a4d5efd4 batman-adv: initialize up/down values when adding a gateway
Without this initialization, gateways which actually announce up/down
bandwidth of 0/0 could be added. If these nodes get purged via
_batadv_purge_orig() later, the gw_node structure does not get removed
since batadv_gw_node_delete() updates the gw_node with up/down
bandwidth of 0/0, and the updating function then discards the change
and does not free gw_node.

This results in leaking the gw_node structures, which references other
structures: gw_node -> orig_node -> orig_node_ifinfo -> hardif. When
removing the interface later, the open reference on the hardif may cause
hangs with the infamous "unregister_netdevice: waiting for mesh1 to
become free. Usage count = 1" message.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-05 00:31:47 +02:00
Marek Lindner ef72706a05 batman-adv: protect tt_local_entry from concurrent delete events
The tt_local_entry deletion performed in batadv_tt_local_remove() was neither
protecting against simultaneous deletes nor checking whether the element was
still part of the list before calling hlist_del_rcu().

Replacing the hlist_del_rcu() call with batadv_hash_remove() provides adequate
protection via hash spinlocks as well as an is-element-still-in-hash check to
avoid 'blind' hash removal.

Fixes: 068ee6e204 ("batman-adv: roaming handling mechanism redesign")
Reported-by: alfonsname@web.de
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-05 00:31:47 +02:00
Marek Lindner 354136bcc3 batman-adv: fix kernel crash due to missing NULL checks
batadv_softif_vlan_get() may return NULL which has to be verified
by the caller.

Fixes: 35df3b298f ("batman-adv: fix TT VLAN inconsistency on VLAN re-add")
Reported-by: Ryan Thompson <ryan@eero.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-05 00:31:46 +02:00
Antonio Quartulli f202a666e9 batman-adv: avoid DAT to mess up LAN state
When a node running DAT receives an ARP request from the LAN for the
first time, it is likely that this node will request the ARP entry
through the distributed ARP table (DAT) in the mesh.

Once a DAT reply is received the asking node must check if the MAC
address for which the IP address has been asked is local. If it is, the
node must drop the ARP reply bceause the client should have replied on
its own locally.

Forwarding this reply means fooling any L2 bridge (e.g. Ethernet
switches) lying between the batman-adv node and the LAN. This happens
because the L2 bridge will think that the client sending the ARP reply
lies somewhere in the mesh, while this node is sitting in the same LAN.

Reported-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-05 00:31:46 +02:00
Antonio Quartulli 94d1dd8731 batman-adv: change the MAC of each VLAN upon ndo_set_mac_address
The MAC address of the soft-interface is used to initialise
the "non-purge" TT entry of each existing VLAN. Therefore
when the user invokes ndo_set_mac_address() all the
"non-purge" TT entries have to be updated, not only the one
belonging to the non-tagged network.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:20 +02:00
Sven Eckelmann 7dac6d9391 batman-adv: Remove unused post-VLAN ethhdr in batadv_gw_dhcp_recipient_get
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:20 +02:00
Sven Eckelmann a2f2b6cd41 batman-adv: Clarify calculation precedence for '&' and '?'
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:19 +02:00
Sven Eckelmann 1e2c2a4fe4 batman-adv: Add required includes to all files
The header files could not be build indepdent from each other. This is
happened because headers didn't include the files for things they've used.
This was problematic because the success of a build depended on the
knowledge about the right order of local includes.

Also source files were not including everything they've used explicitly.
Instead they required that transitive includes are always stable. This is
problematic because some transitive includes are not obvious, depend on
config settings and may not be stable in the future.

The order for include blocks are:

 * primary headers (main.h and the *.h file of a *.c file)
 * global linux headers
 * required local headers
 * extra forward declarations for pointers in function/struct declarations

The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h.
This header file is shared with userspace applications like batctl and must
therefore build together with userspace applications. The header
linux/bitops.h is not part of the uapi headers and linux/if_ether.h
conflicts with the musl implementation of netinet/if_ether.h. The
maintainers rejected the use of __KERNEL__ preprocessor checks and thus
these two headers are only in main.h. All files using packet.h first have
to include main.h to work correctly.

Reported-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:19 +02:00
Antonio Quartulli bcef1f3c49 batman-adv: add bat_neigh_free API
This API has to be used to let any routing protocol free
neighbor specific allocated resources

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:18 +02:00
Antonio Quartulli 6f70eb7552 batman-adv: split name from variable for uint mesh attributes
Some mesh attributes are behind substructs in the
batadv_priv object and for this reason the name cannot be
used anymore to refer to them.

This patch allows to specify the variable name where the
attribute is stored inside batadv_priv instead of using the
name

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:18 +02:00
Sven Eckelmann 36fd61cb80 batman-adv: Use common Jenkins Hash implementation
An unoptimized version of the Jenkins one-at-a-time hash function is used
and partially copied all over the code wherever an hashtable is used.
Instead the optimized version shared between the whole kernel should be
used to reduce code duplication and use better optimized code.

Only the DAT code must use the old implementation because it is used as
distributed hash function which has to be common for all nodes.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:17 +02:00
Markus Pargmann f372d09059 batman-adv: Remove unnecessary ret variable in algo_register
Remove ret variable and all jumps.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 15:57:25 +02:00
Markus Pargmann 9fb6c6519b batman-adv: Remove unnecessary ret variable
We can avoid this indirect return variable by directly returning the
error values.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 15:57:24 +02:00
Markus Pargmann f2d5cf2add batman-adv: main, batadv_compare_eth return bool
Declare the returntype of batadv_compare_eth as bool.
The function called inside this helper function
(ether_addr_equal_unaligned) also uses bool as return value, so there is
no need to return int.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 15:57:24 +02:00
Markus Pargmann e8ad3b1acf batman-adv: main, Convert is_my_mac() to bool
It is much clearer to see a bool type as return value than 'int' for
functions that are supposed to return true or false.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 15:57:24 +02:00
Sven Eckelmann a0c77227ff batman-adv: Remove unnecessary check for orig_ifinfo not NULL
orig_ifinfo is dereferenced multiple times in batadv_iv_ogm_update_seqnos
before the check for NULL is done. The function also exists at the
beginning when orig_ifinfo would have been NULL. This makes the check at
the end unnecessary and only confuses the reader/code analyzers.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 15:57:23 +02:00
Markus Pargmann 21102626da batman-adv: types, Fix comment on bcast_own
batadv_orig_bat_iv->bcast_own is actually not a bitfield, it is an
array. Adjust the comment accordingly.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 15:57:23 +02:00
Markus Pargmann d491dbb68b batman-adv: iv_ogm, fix comment function name
This is a small copy paste fix for batadv_ing_buffer_avg.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 10:58:32 +02:00
Markus Pargmann 6c4a1622e2 batman-adv: iv_ogm, fix coding style
The kernel coding style says, that there should not be multiple
assignments in one row.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 10:58:31 +02:00
Markus Pargmann 9f52ee19c3 batman-adv: iv_ogm, Fix dup_status comment
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 10:58:31 +02:00
Markus Pargmann 23badd6dbe batman-adv: iv_ogm_orig_update, style, add missing brackets
CodingStyle describes that either none or both branches of a conditional
have to have brackets.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 10:58:31 +02:00
Markus Pargmann 564891510e batman-adv: iv_ogm_queue_add, Simplify expressions
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 10:58:30 +02:00
Markus Pargmann 940d156f52 batman-adv: iv_ogm_aggregate_new, simplify error handling
It is just a bit easier to put the error handling at one place and let
multiple error paths use the same calls.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03 10:58:30 +02:00
Antonio Quartulli 8ea64e2708 batman-adv: Use common declaration order in *_send_skb_(packet|unicast)
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2015-05-29 10:13:37 +02:00
Markus Pargmann 01b97a3eed batman-adv: iv_ogm_orig_update, remove unnecessary brackets
Remove these unnecessary brackets inside a condition.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:37 +02:00
Markus Pargmann 8f34b38878 batman-adv: iv_ogm_can_aggregate, code readability
This patch tries to increase code readability by negating the first if
block and rearranging some of the other conditional blocks. This way we
save an indentation level, we also save some allocation that is not
necessary for one of the conditions.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:37 +02:00
Marek Lindner fc1f869366 batman-adv: checkpatch - spaces preferred around that '*'
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:37 +02:00
Marek Lindner 00f548bf54 batman-adv: checkpatch - comparison to NULL could be rewritten
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:37 +02:00
Sven Eckelmann dab7b62190 batman-adv: Use safer default config for optional features
The current default settings for optional features in batman-adv seems to
be based around the idea that the user only compiles what he requires. They
will automatically enabled when they are compiled in. For example the
network coding part of batman-adv is by default disabled in the out-of-tree
module but will be enabled when the code is compiled during the module
build.

But distributions like Debian just enable all features of the batman-adv
kernel module and hope that more experimental features or features with
possible negative effects have to be enabled using some runtime
configuration interface.

The network_coding feature can help in specific setups but also has
drawbacks and is not disabled by default in the out-of-tree module.
Disabling by default in the runtime config seems to be also quite sane.

The bridge_loop_avoidance is the only feature which is disabled by default
but may be necessary even in simple setups. Packet loops may even be
created during the initial node setup when this is not enabled. This is
different than STP on bridges because mesh is usually used on Adhoc WiFi.
Having two nodes (by accident) in the same LAN segment and in the same mesh
network is rather common in this situation.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:36 +02:00
Markus Pargmann de12baece9 batman-adv: iv_ogm_send_to_if, declare char* as const
This string pointer is later assigned to a constant string, so it should
be defined constant at the beginning.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:36 +02:00
Markus Pargmann 9fd9b19ea0 batman-adv: iv_ogm_aggr_packet, bool return value
This function returns bool values, so it should be defined to return
them instead of the whole int range.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:36 +02:00
Markus Pargmann 42d9f2cbd4 batman-adv: iv_ogm_iface_enable, direct return values
Directly return error values. No need to use a return variable.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:36 +02:00
Markus Pargmann 9fc1883ef2 batman-adv: Makefile, Sort alphabetically
The whole Makefile is sorted, just the multicast rule is not at the
right position.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:36 +02:00
Markus Pargmann 16b9ce83fb batman-adv: tvlv realloc, move error handling into if block
Instead of hiding the normal function flow inside an if block, we should
just put the error handling into the if block.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:36 +02:00
Markus Pargmann 9bb218828c batman-adv: debugfs, avoid compiling for !DEBUG_FS
Normally the debugfs framework will return error pointer with -ENODEV
for function calls when DEBUG_FS is not set.

batman does not notice this error code and continues trying to create
debugfs files and executes more code. We can avoid this code execution
by disabling compiling debugfs.c when DEBUG_FS is not set.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:35 +02:00
Sven Eckelmann 83e8b87721 batman-adv: Use only queued fragments when merging
The fragment queueing code now validates the total_size of each fragment,
checks when enough fragments are queued to allow to merge them into a
single packet and if the fragments have the correct size. Therefore, it is
not required to have any other parameter for the merging function than a
list of queued fragments.

This change should avoid problems like in the past when the different skb
from the list and the function parameter were mixed incorrectly.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:35 +02:00
Sven Eckelmann 53e771457e batman-adv: Check total_size when queueing fragments
The fragmentation code was replaced in
610bfc6bc9 ("batman-adv: Receive fragmented
packets and merge") by an implementation which handles the queueing+merging
of fragments based on their size and the total_size of the non-fragmented
packet. This total_size is announced by each fragment. The new
implementation doesn't check if the the total_size information of the
packets inside one chain is consistent.

This is consistency check is recommended to allow using any of the packets
in the queue to decide whether all fragments of a packet are received or
not.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:35 +02:00
Sven Eckelmann 9f6446c7f9 batman-adv: update copyright years for 2015
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:35 +02:00
Simon Wunderlich 70e717762d batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2015-05-29 10:13:35 +02:00
Nicolas Dichtel a54acb3a6f dev: introduce dev_get_iflink()
The goal of this patch is to prepare the removal of the iflink field. It
introduces a new ndo function, which will be implemented by virtual interfaces.

There is no functional change into this patch. All readers of iflink field
now call dev_get_iflink().

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 14:04:59 -04:00
Joe Perches 92b8391750 batman-adv: Fix use of seq_has_overflowed()
net-next commit 6d91147d18 ("batman-adv: Remove uses of return value
of seq_printf") incorrectly changed the overflow occurred return from
-1 to 1.  Change it back so that the test of batadv_write_buffer_text's
return value in batadv_gw_client_seq_print_text works properly.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 17:00:08 -05:00
Joe Perches 6d91147d18 batman-adv: Remove uses of return value of seq_printf
This function is soon going to return void so remove the
return value use.

Convert the return value to test seq_has_overflowed() instead.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 15:18:26 -05:00
Markus Pargmann 9535395640 batman-adv: Kconfig, Add missing DEBUG_FS dependency
BATMAN_ADV_DEBUG is using debugfs files for the debugging log. So it
depends on DEBUG_FS which is missing as dependency in the Kconfig file.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 22:17:11 +01:00
Simon Wunderlich dcba6c9b45 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:58 +01:00
Antonio Quartulli 3f68785e61 batman-adv: fix misspelled words
Reported-by: checkpatch
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07 17:21:57 +01:00
Martin Hundebøll e0d9677ea3 batman-adv: clear control block of received socket buffers
Since other network components (and some drivers) uses the control block
provided in skb's, the network coding feature might wrongly assume that
an SKB has been decoded, and thus not try to code it with another packet
again. This happens for instance when batman-adv is running on a bridge device.

Fix this by clearing the control block for every received SKB.

Introduced by 3c12de9a5c
("batman-adv: network coding - code and transmit packets if possible")
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:57 +01:00
Antonio Quartulli 32db6aaafe batman-adv: checkpatch - remove unnecessary parentheses
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07 17:21:56 +01:00
Antonio Quartulli 8a3f8b6ac5 batman-adv: checkpatch - Please don't use multiple blank lines
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07 17:21:56 +01:00
Antonio Quartulli aa143d2837 batman-adv: checkpatch - Please use a blank line after declarations
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07 17:21:55 +01:00
Antonio Quartulli 9687a31c84 batman-adv: checkpatch - No space is necessary after a cast
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07 17:21:55 +01:00
Antonio Quartulli 24820df144 batman-adv: checkpatch - else is not generally useful after a break or return
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07 17:21:55 +01:00
Martin Hundebøll a0e2877505 batman-adv: kernel doc fixes for main.{c, h}
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:54 +01:00
Martin Hundebøll ba97abb863 batman-adv: kernel doc fix for distributed-arp-table.h
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:54 +01:00
Martin Hundebøll e335718988 batman-adv: kernel doc fixes for bridge_loop_avoidance.c
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Acked-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:54 +01:00
Martin Hundebøll 95298a91f9 batman-adv: kernel doc fixes for bat_iv_ogm.c
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:53 +01:00
Simon Wunderlich 320b936678 batman-adv: remove obsolete variable primary_iface from orig_node
This variable became obsolete when changing to the new bonding mechanism
based on the multi interface optimization. Since its not used anywhere,
remove it.

Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:53 +01:00
Antonio Quartulli 193924472a batman-adv: avoid useless return in void functions
Cc: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07 17:21:52 +01:00
Linus Lüssing 9d31b3ce81 batman-adv: fix potential TT client + orig-node memory leak
This patch fixes a potential memory leak which can occur once an
originator times out. On timeout the according global translation table
entry might not get purged correctly. Furthermore, the non purged TT
entry will cause its orig-node to leak, too. Which additionally can lead
to the new multicast optimization feature not kicking in because of a
therefore bogus counter.

In detail: The batadv_tt_global_entry->orig_list holds the reference to
the orig-node. Usually this reference is released after
BATADV_PURGE_TIMEOUT through: _batadv_purge_orig()->
batadv_purge_orig_node()->batadv_update_route()->_batadv_update_route()->
batadv_tt_global_del_orig() which purges this global tt entry and
releases the reference to the orig-node.

However, if between two batadv_purge_orig_node() calls the orig-node
timeout grew to 2*BATADV_PURGE_TIMEOUT then this call path isn't
reached. Instead the according orig-node is removed from the
originator hash in _batadv_purge_orig(), the batadv_update_route()
part is skipped and won't be reached anymore.

Fixing the issue by moving batadv_tt_global_del_orig() out of the rcu
callback.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-06 11:07:01 +01:00
Linus Lüssing a5164886b0 batman-adv: fix multicast counter when purging originators
When purging an orig_node we should only decrease counter tracking the
number of nodes without multicast optimizations support if it was
increased through this orig_node before.

A not yet quite initialized orig_node (meaning it did not have its turn
in the mcast-tvlv handler so far) which gets purged would not adhere to
this and will lead to a counter imbalance.

Fixing this by adding a check whether the orig_node is mcast-initalized
before decreasing the counter in the mcast-orig_node-purging routine.

Introduced by 60432d756c
("batman-adv: Announce new capability via multicast TVLV")

Reported-by: Tobias Hachmer <tobias@hachmer.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-06 11:06:04 +01:00
Linus Lüssing e8829f007e batman-adv: fix counter for multicast supporting nodes
A miscounting of nodes having multicast optimizations enabled can lead
to multicast packet loss in the following scenario:

If the first OGM a node receives from another one has no multicast
optimizations support (no multicast tvlv) then we are missing to
increase the counter. This potentially leads to the wrong assumption
that we could safely use multicast optimizations.

Fixings this by increasing the counter if the initial OGM has the
multicast TVLV unset, too.

Introduced by 60432d756c
("batman-adv: Announce new capability via multicast TVLV")

Reported-by: Tobias Hachmer <tobias@hachmer.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-06 11:05:42 +01:00
Martin Hundebøll f44d54077a batman-adv: fix lock class for decoding hash in network-coding.c
batadv_has_set_lock_class() is called with the wrong hash table as first
argument (probably due to a copy-paste error), which leads to false
positives when running with lockdep.

Introduced-by: 612d2b4fe0
("batman-adv: network coding - save overheard and tx packets for decoding")

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-06 11:05:12 +01:00
Linus Lüssing 2c667a339c batman-adv: fix delayed foreign originator recognition
Currently it can happen that the reception of an OGM from a new
originator is not being accepted. More precisely it can happen that
an originator struct gets allocated and initialized
(batadv_orig_node_new()), even the TQ gets calculated and set correctly
(batadv_iv_ogm_calc_tq()) but still the periodic orig_node purging
thread will decide to delete it if it has a chance to jump between
these two function calls.

This is because batadv_orig_node_new() initializes the last_seen value
to zero and its caller (batadv_iv_ogm_orig_get()) makes it visible to
other threads by adding it to the hash table already.
batadv_iv_ogm_calc_tq() will set the last_seen variable to the correct,
current time a few lines later but if the purging thread jumps in between
that it will think that the orig_node timed out and will wrongly
schedule it for deletion already.

If the purging interval is the same as the originator interval (which is
the default: 1 second), then this game can continue for several rounds
until the random OGM jitter added enough difference between these
two (in tests, two to about four rounds seemed common).

Fixing this by initializing the last_seen variable of an orig_node
to the current time before adding it to the hash table.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-06 11:05:09 +01:00
Simon Wunderlich 329887ad13 batman-adv: fix and simplify condition when bonding should be used
The current condition actually does NOT consider bonding when the
interface the packet came in from is the soft interface, which is the
opposite of what it should do (and the comment describes). Fix that and
slightly simplify the condition.

Reported-by: Ray Gibson <booray@gmail.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-06 11:05:07 +01:00