[ Upstream commit 47d2668418 ]
When setting up DMA for a PCI device, we need to initialize its
iommu_fwspec with all possible alias RIDs (such as PCI bridges). To do
this we use pci_for_each_dma_alias() which calls
viot_pci_dev_iommu_init(). This function incorrectly initializes the
fwspec of the bridge instead of the device being configured. Fix it by
passing the original device as context to pci_for_each_dma_alias().
Fixes: 3cf485540e ("ACPI: Add driver for the VIOT table")
Link: https://lore.kernel.org/all/Y8qzOKm6kvhGWG1T@myrica
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2ccba9e8c ]
Two distinct pools of xfer descriptors are allocated at initialization
time: one (Tx) used to provide xfers to track commands and their replies
(or delayed replies) and another (Rx) to pick xfers from to be used for
processing notifications.
Such pools, though, are allocated globally to be used by the whole SCMI
instance, they are not allocated per-channel and as such the allocation of
notifications xfers cannot be simply skipped if no Rx channel was found for
the base protocol common channel, because there could be defined more
optional per-protocol dedicated channels that instead support Rx channels.
Change the conditional check to skip allocation for the notification pool
only if no Rx channel has been detected on any per-channel protocol at all.
Fixes: 4ebd8f6dea ("firmware: arm_scmi: Add receive buffer support for notifications")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230326203449.3492948-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a622310f7f ]
OMAP processors support 32 channels but there is no check or
inspect this except booting a device and looking at dmesg reports
of not available channels.
Recently some more subsystems with DMA (aes1+2) were added filling
the list of dma channels beyond the limit of 32 (even if other
parameters indicate 96 or 128 channels). This leads to random
subsystem failures i(e.g. mcbsp for audio) after boot or boot
messages that DMA can not be initialized.
Another symptom is that
/sys/kernel/debug/dmaengine/summary
has 32 entries and does not show all required channels.
Fix by disabling unused (on the GTA04 hardware) mcspi1...4.
Each SPI channel allocates 4 DMA channels rapidly filling
the available ones.
Disabling unused SPI modules on the OMAP3 SoC may also save
some energy (has not been checked).
Fixes: c312f06631 ("ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[re-enabled aes2, improved commit subject line]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-Id: <20230113211151.2314874-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dd8316037 ]
If spec_reg is equal to 'SDHCI_PRESENT_STATE', esdhc_readl_fixup()
fixes up register value and returns it immediately. As a result, the
further block
(spec_reg == SDHCI_PRESENT_STATE)
&&(esdhc->quirk_ignore_data_inhibit == true),
is never executed.
The patch merges the second block into the first one.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1f1929f3f2 ("mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data")
Signed-off-by: Georgii Kruglov <georgy.kruglov@yandex.ru>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230321203715.3975-1-georgy.kruglov@yandex.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 073828e954 ]
In ACPI systems, the OS can direct power management, as opposed to the
firmware. This OS-directed Power Management is called OSPM. Part of
telling the firmware that the OS going to direct power management is
making ACPI "_PDC" (Processor Driver Capabilities) calls. These _PDC
methods must be evaluated for every processor object. If these _PDC
calls are not completed for every processor it can lead to
inconsistency and later failures in things like the CPU frequency
driver.
In a Xen system, the dom0 kernel is responsible for system-wide power
management. The dom0 kernel is in charge of OSPM. However, the
number of CPUs available to dom0 can be different than the number of
CPUs physically present on the system.
This leads to a problem: the dom0 kernel needs to evaluate _PDC for
all the processors, but it can't always see them.
In dom0 kernels, ignore the existing ACPI method for determining if a
processor is physically present because it might not be accurate.
Instead, ask the hypervisor for this information.
Fix this by introducing a custom function to use when running as Xen
dom0 in order to check whether a processor object matches a CPU that's
online. Such checking is done using the existing information fetched
by the Xen pCPU subsystem, extending it to also store the ACPI ID.
This ensures that _PDC method gets evaluated for all physically online
CPUs, regardless of the number of CPUs made available to dom0.
Fixes: 5d554a7bb0 ("ACPI: processor: add internal processor_physically_present()")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4082b9f5ea ]
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC1_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:188:17: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC2_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:189:17: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: note: (near initialization for ‘xfm_regs[2].DCFE_MEM_LIGHT_SLEEP_CN
[100 lines snipped for brevity]
Fixes: ceb3cf476a ("drm/amd/display/dc/dce60/Makefile: Ignore -Woverride-init warning")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 010c8bbad2 ]
Downstream driver appears to not support preemption on A510 target,
trying to use one make device slow and fill log with rings related errors.
Set num_rings to 1 to disable preemption.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: e20c9284c8 ("drm/msm/adreno: Add support for Adreno 510 GPU")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/526898/
Link: https://lore.kernel.org/r/20230314221757.13096-1-a39.skl@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db7662d076 ]
The runtime PM status can only be updated while runtime PM is disabled.
Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.
Fixes: 2c087a3366 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524972/
Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b18299b33 ]
To avoid preventing the display from coming up before the rootfs is
mounted, without resorting to packing fw in the initrd, the GPU has
this limbo state where the device is probed, but we aren't ready to
start sending commands to it. This is particularly problematic for
a6xx, since the GMU (which requires fw to be loaded) is the one that
is controlling the power/clk/icc votes.
So defer enabling runpm until we are ready to call gpu->hw_init(),
as that is a point where we know we have all the needed fw and are
ready to start sending commands to the coproc's.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489337/
Link: https://lore.kernel.org/r/20220613182036.2567963-1-robdclark@gmail.com
Stable-dep-of: db7662d076 ("drm/msm/adreno: drop bogus pm_runtime_set_active()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfce6a12e5 ]
The control handler is leaked in some probe-time error paths, as well as
in the remove path. Fix it.
Fixes: 66d8c9d242 ("media: i2c: Add MAX9286 driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0285e134 ]
When dynamically switching lanes was removed, the intent of the code
was to check to make sure that higher speed items used 4 lanes, but
it had the unintended consequence of removing the slower speeds for
4-lane users.
This attempts to remedy this by doing a check to see that the
max frequency doesn't exceed the chip limit, and a second
check to make sure that the max bit-rate doesn't exceed the
number of lanes * max bit rate / lane.
Fixes: 9a0cdcd664 ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 781d32d1c9 ]
During normal restart of a system download bit should
be cleared irrespective of whether download mode is
set or not.
Fixes: 8c1b7dc9ba ("firmware: qcom: scm: Expose download-mode control")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1678979666-551-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eed9496a05 ]
The buf[4] value comes from the user via ts_play(). It is a value in
the u8 range. The final length we pass to av7110_ipack_instant_repack()
is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is
not negative. It's not clear that passing a negative len value does
anything bad necessarily, but it's not best practice.
With the new bounds checking the "if (!len)" condition is no longer
possible or required so remove that.
Fixes: fd46d16d60 ("V4L/DVB (11759): dvb-ttpci: Add TS replay capability")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2371adeab7 ]
Add the check for the return value of the create_workqueue
in order to avoid NULL pointer dereference.
Fixes: 28ffeebbb7 ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c1cdec319 ]
Thee maximum number of MCA banks is 64 (MAX_NR_BANKS), see
a0bc32b3ca ("x86/mce: Increase maximum number of banks to 64").
However, the bank_map which contains a bitfield of which banks to
initialize is of type unsigned int and that overflows when those bit
numbers are >= 32, leading to UBSAN complaining correctly:
UBSAN: shift-out-of-bounds in arch/x86/kernel/cpu/mce/amd.c:1365:38
shift exponent 32 is too large for 32-bit type 'int'
Change the bank_map to a u64 and use the proper BIT_ULL() macro when
modifying bits in there.
[ bp: Rewrite commit message. ]
Fixes: a0bc32b3ca ("x86/mce: Increase maximum number of banks to 64")
Signed-off-by: Muralidhara M K <muralimk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230127151601.1068324-1-muralimk@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b16b34e49 ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 93241840b6 ("ARM: dts: qcom: Add pcie nodes for ipq8064")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fafb7e5c0 ]
The current value for pci IO is problematic for ath10k wifi card
commonly connected to ipq8064 SoC.
The current value is probably a typo and is actually uncommon to find
1MB IO space even on a x86 arch. Also with recent changes to the pci
driver, pci1 and pci2 now fails to function as any connected device
fails any reg read/write. Reduce this to 64K as it should be more than
enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT
hardcoded for the ARM arch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-7-ansuelsmth@gmail.com
Stable-dep-of: 0b16b34e49 ("ARM: dts: qcom: ipq8064: Fix the PCI I/O port range")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2540279e9a ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 1875194032 ("ARM: dts: ipq4019: Add a few peripheral nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e115a4495d ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000, 0x64200000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: e53bdfc009 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf0ac10feb ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x0c200000, 0x0d200000, 0x0e200000) specified in the ranges property for
I/O region.
While at it, let's also align the entries.
Fixes: ed965ef892 ("arm64: dts: qcom: msm8996: add support to pcie")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75a6e1fdb3 ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI address
(0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 095bbdd9a5 ("arm64: dts: qcom: ipq6018: Add pcie support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e49eafefe5 ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x10200000, 0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses and align
them in a single line.
Fixes: 33057e1672 ("ARM: dts: ipq8074: Add pcie nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67aa109eee ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 42ad231338 ("arm64: dts: qcom: sdm845: Add second PCIe PHY and controller")
Fixes: 5c538e09cb ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e0a8e35d7 ]
Following sm8150/sm8250 update sdm845 capacity-dmips-mhz and
dynamic-power-coefficient based on the measurements [1], [2].
The energy model dynamic-power-coefficient values were calculated with
DPC = µW / MHz / V^2
for each OPP, and averaged across all OPPs within each cluster for the
final coefficient. Voltages were obtained from the qcom-cpufreq-hw
driver that reads voltages from the OSM LUT programmed into the SoC.
Normalized DMIPS/MHz capacity scale values for each CPU were calculated
from CoreMarks/MHz (CoreMark iterations per second per MHz), which
serves the same purpose. For each CPU, the final capacity-dmips-mhz
value is the C/MHz value of its maximum frequency normalized to
SCHED_CAPACITY_SCALE (1024) for the fastest CPU in the system.
For more details on measurement process see the commit message for the
commit 6aabed5526 ("arm64: dts: qcom: sm8250: Add CPU capacities and
energy model").
[1] https://github.com/kdrag0n/freqbench
[2] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main
Cc: Danny Lin <danny@kdrag0n.dev>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220315141104.730235-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ded8f22945 ]
As part of ARCH_BCM4908 to ARCH_BCMBCA migration, move the BCM4908 dts
files to bcmbca folder and use CONFIG_ARCH_BCMBCA to build all the
BCM4908 board dts. Delete bcm4908 folder and its makefile as well.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220803175455.47638-5-william.zhang@broadcom.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Stable-dep-of: 5cca024494 ("arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ba56aeb39 ]
Add DTS for ARMv8 based broadband SoC BCM4912. bcm4912.dtsi is the
SoC description DTS header and bcm94912.dts is a simple DTS file for
Broadcom BCM94912 Reference board that only enable the UART port.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Stable-dep-of: 5cca024494 ("arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0e68d354f ]
It's a home router based on BCM4908 SoC. It has: 1 GiB of RAM, 512 MiB
NAND flash, 6 Ethernet ports and 3 x BCM43684 (WiFi). One of Ethernet
ports is "2.5 G Multi-Gig port" that isn't described yet (it isn't known
how it's wired up).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Stable-dep-of: 5cca024494 ("arm64: dts: broadcom: bcmbca: bcm4908: fix NAND interrupt name")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f4b30a777 ]
According to latest errata of J721e [1], (i2024) 'MMCSD: Peripherals
Do Not Support HS400' which applies to MMCSD0 subsystem. Speed modes
supported has been already updated but missed dropping 'ti,strobe-sel'
property which is only required by HS400 speed mode.
Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e SoC.
[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf
Fixes: eb8f6194e8 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Diwakar Dhyani <d-dhyani@ti.com>
Reviewed-by: Nitin Yadav <n-yadav@ti.com>
Link: https://lore.kernel.org/r/20230203073724.29529-1-b-kapoor@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 691c1fcda5 ]
This is very close to a straight revert of commit 218320fec2
("regulator: core: Fix off-on-delay-us for always-on/boot-on
regulators"). We've identified that patch as causing a boot speed
regression on sc7180-trogdor boards. While boot speed certainly isn't
more important than making sure that power sequencing is correct,
looking closely at the original change it doesn't seem to have been
fully justified. It mentions "cycling issues" without describing
exactly what the issues were. That means it's possible that the
cycling issues were really a problem that should be fixed in a
different way.
Let's take a careful look at how we should handle regulators that have
an off-on-delay and that are boot-on or always-on. Linux currently
doesn't have any way to identify whether a GPIO regulator was already
on when the kernel booted. That means that when the kernel boots we
probe a regulator, see that it wants boot-on / always-on we, and then
turn the regulator on. We could be in one of two cases when we do
this:
a) The regulator might have been left on by the bootloader and we're
ensuring that it stays on.
b) The regulator might have been left off by the bootloader and we're
just now turning it on.
For case a) we definitely don't need any sort of delay. For case b) we
_might_ need some delay in case the bootloader turned the regulator
off _right_ before booting the kernel. To get the proper delay for
case b) then we can just assume a `last_off` of 0, which is what it
gets initialized to by default.
As per above, we can't tell whether we're in case a) or case b) so
we'll assume the longer delay (case b). This basically puts the code
to how it was before commit 218320fec2 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"). However, we add
one important change: we make sure that the delay is actually honored
if `last_off` is 0. Though the original "cycling issues" cited were
vague, I'm hopeful that this important extra change will be enough to
fix the issues that the initial commit mentioned.
With this fix, I've confined that on a sc7180-trogdor board the delay
at boot goes down from 500 ms to ~250 ms. That's not as good as the 0
ms that we had prior to commit 218320fec2 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"), but it's probably
safer because we don't know if the bootloader turned the regulator off
right before booting.
One note is that it's possible that we could be in a state that's not
a) or b) if there are other issues in the kernel. The only one I can
think of is related to pinctrl. If the pinctrl driver being used on a
board isn't careful about avoiding glitches when setting up a pin then
it's possible that setting up a pin could cause the regulator to "turn
off" briefly immediately before the regulator probes. If this is
indeed causing problems then the pinctrl driver should be fixed,
perhaps in a similar way to what was done in commit d21f4b7ffc
("pinctrl: qcom: Avoid glitching lines when we first mux to output")
Fixes: 218320fec2 ("regulator: core: Fix off-on-delay-us for always-on/boot-on regulators")
Cc: Christian Kohlschütter <christian@kohlschutter.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230313111806.1.I2eaad872be0932a805c239a7c7a102233fb0b03b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71b1e3ba3f ]
The current DRAM row address mapping arrays skx_{open,close}_row[]
only support ranks with sizes up to 16G. Decoding a rank address
to a DRAM row address for a 32G rank by using either one of the
above arrays by the skx_edac driver, will result in an overflow on
the array.
For a 32G rank, the most significant DRAM row address bit (the
bit17) is mapped from the bit34 of the rank address. Add this new
mapping item to both arrays to fix the overflow issue.
Fixes: 4ec656bdf4 ("EDAC, skx_edac: Add EDAC driver for Skylake")
Reported-by: Feng Xu <feng.f.xu@intel.com>
Tested-by: Feng Xu <feng.f.xu@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230211011728.71764-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b697569384 ]
According to KMS documentation, The driver must not release any shared
resources if active is set to false but enable still true.
Fixes: ccc862b957 ("drm/msm/dpu: Fix reservation failures in modeset")
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524726/
Link: https://lore.kernel.org/r/1677774797-31063-5-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 554edc3e92 ]
According to the RZ/G Series, 2nd Generation Hardware User’s Manual
Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: 231d8908a6 ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb76b0fae3 ]
According to the R-Car Series, 3rd Generation Hardware User’s Manual
Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power
supply, but use the common internal power supply (typical 1.03V).
Hence remove the "opp-microvolt" properties from the Operating
Performance Points table. They are optional, and unused, when none of
the CPU nodes is tied to a regulator using the "cpu-supply" property.
Fixes: dd7188eb4e ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e347bdf44 ]
Leaf Fn00000007 contains avx512bw at bit 26 and avx512vl at bit 28. This
is incorrect per the SDM. Correct avx512bw to be bit 30 and avx512lvl to
be bit 31.
Fixes: c6b2f240bf ("tools/x86: Add a kcpuid tool to show raw CPU features")
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-2-terry.bowman@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8e47884f1 ]
Currently we schedule a call to output_poll_execute from
drm_kms_helper_poll_enable for 10s in future. Later we try to replace
that in drm_helper_probe_single_connector_modes with a 0s schedule with
delayed_event set.
But as there is already a job in the queue this fails, and the immediate
job we wanted with delayed_event set doesn't occur until 10s later.
And that call acts as if connector state has changed, reprobing modes.
This has a side effect of waking up a display that has been blanked.
Make sure we cancel the old job before submitting the immediate one.
Fixes: 162b6a57ac ("drm/probe-helper: don't lose hotplug event")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[Maxime: Switched to mod_delayed_work]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 955df4f877 ]
In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.
Fixes: 45baa1d1fa ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Mogalapalli
Jean-Philippe Brucker
Cristian Marussi
H. Nikolaus Schaller
Dan Carpenter
Georgii Kruglov
Roger Pau Monne
Lee Jones
Adam Skladowski
Johan Hovold
Rob Clark
Laurent Pinchart
Adam Ford
Mukesh Ojha
Jiasheng Jiang
Muralidhara M K
Manivannan Sadhasivam
Christian Marangi
Dmitry Baryshkov
Konrad Dybcio
Rafał Miłecki
William Zhang
Anand Gore
Bhavya Kapoor
Douglas Anderson
Qiuxu Zhuo
Vinod Polimera
Geert Uytterhoeven
Miaoqian Lin
Terry Bowman
Dom Cobley
Maíra Canal
Jingbo Xu
Gao Xiang
Lino Sanfilippo