Граф коммитов

36 Коммитов

Автор SHA1 Сообщение Дата
David Howells 4a47132ff4 FS-Cache: Retain the netfs context in the retrieval op earlier
Now that the retrieval operation may be disposed of by fscache_put_operation()
before we actually set the context, the retrieval-specific cleanup operation
can produce a NULL-pointer dereference when it tries to unconditionally clean
up the netfs context.

Given that it is expected that we'll get at least as far as the place where we
currently set the context pointer and it is unlikely we'll go through the
error handling paths prior to that point, retain the context right from the
point that the retrieval op is allocated.

Concomitant to this, we need to retain the cookie pointer in the retrieval op
also so that we can call the netfs to release its context in the release
method.

In addition, we might now get into fscache_release_retrieval_op() with the op
only initialised.  To this end, set the operation to DEAD only after the
release method has been called and skip the n_pages test upon cleanup if the
op is still in the INITIALISED state.

Without these changes, the following oops might be seen:

	BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
	...
	RIP: 0010:[<ffffffffa0089c98>] fscache_release_retrieval_op+0xae/0x100
	...
	Call Trace:
	 [<ffffffffa0088560>] fscache_put_operation+0x117/0x2e0
	 [<ffffffffa008b8f5>] __fscache_read_or_alloc_pages+0x351/0x3ac
	 [<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
	 [<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
	 [<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
	 [<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
	 [<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
	 [<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
	 [<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
	 [<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
	 [<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
	 [<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
	 [<ffffffff811363be>] new_sync_read+0x78/0x9c
	 [<ffffffff81137164>] __vfs_read+0x13/0x38
	 [<ffffffff8113721e>] vfs_read+0x95/0x121
	 [<ffffffff811372f6>] SyS_read+0x4c/0x8a
	 [<ffffffff81557a52>] system_call_fastpath+0x12/0x17

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-04-02 14:28:53 +01:00
David Howells d3b97ca4a9 FS-Cache: The operation cancellation method needs calling in more places
Any time an incomplete operation is cancelled, the operation cancellation
function needs to be called to clean up.  This is currently being passed
directly to some of the functions that might want to call it, but not all.

Instead, pass the cancellation method pointer to the fscache_operation_init()
and have that cache it in the operation struct.  Further, plug in a dummy
cancellation handler if the caller declines to set one as this allows us to
call the function unconditionally (the extra overhead isn't worth bothering
about as we don't expect to be calling this typically).

The cancellation method must thence be called everywhere the CANCELLED state
is set.  Note that we call it *before* setting the CANCELLED state such that
the method can use the old state value to guide its operation.

fscache_do_cancel_retrieval() needs moving higher up in the sources so that
the init function can use it now.

Without this, the following oops may be seen:

	FS-Cache: Assertion failed
	FS-Cache: 3 == 0 is false
	------------[ cut here ]------------
	kernel BUG at ../fs/fscache/page.c:261!
	...
	RIP: 0010:[<ffffffffa0089c1b>]  fscache_release_retrieval_op+0x77/0x100
	 [<ffffffffa008853d>] fscache_put_operation+0x114/0x2da
	 [<ffffffffa008b8c2>] __fscache_read_or_alloc_pages+0x358/0x3b3
	 [<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
	 [<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
	 [<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
	 [<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
	 [<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
	 [<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
	 [<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
	 [<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
	 [<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
	 [<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
	 [<ffffffff811363be>] new_sync_read+0x78/0x9c
	 [<ffffffff81137164>] __vfs_read+0x13/0x38
	 [<ffffffff8113721e>] vfs_read+0x95/0x121
	 [<ffffffff811372f6>] SyS_read+0x4c/0x8a
	 [<ffffffff81557a52>] system_call_fastpath+0x12/0x17

The assertion is showing that the remaining number of pages (n_pages) is not 0
when the operation is being released.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-04-02 14:28:53 +01:00
David Howells 1339ec98e3 FS-Cache: Out of line fscache_operation_init()
Out of line fscache_operation_init() so that it can access internal FS-Cache
features, such as stats, in a later commit.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-04-02 14:28:53 +01:00
David Howells 8702152630 FS-Cache: fscache_object_is_dead() has wrong logic, kill it
fscache_object_is_dead() returns true only if the object is marked dead and
the cache got an I/O error.  This should be a logical OR instead.  Since two
of the callers got split up into handling for separate subcases, expand the
other callers and kill the function.  This is probably the right thing to do
anyway since one of the subcases isn't about the object at all, but rather
about the cache.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-04-02 14:28:53 +01:00
David Howells 30ceec6284 FS-Cache: When submitting an op, cancel it if the target object is dying
When submitting an operation, prefer to cancel the operation immediately
rather than queuing it for later processing if the object is marked as dying
(ie. the object state machine has reached the KILL_OBJECT state).

Whilst we're at it, change the series of related test_bit() calls into a
READ_ONCE() and bitwise-AND operators to reduce the number of load
instructions (test_bit() has a volatile address).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-04-02 14:28:53 +01:00
David Howells 182d919b84 FS-Cache: Count culled objects and objects rejected due to lack of space
Count the number of objects that get culled by the cache backend and the
number of objects that the cache backend declines to instantiate due to lack
of space in the cache.

These numbers are made available through /proc/fs/fscache/stats

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
2015-02-24 10:05:27 +00:00
David Howells 94d30ae90a FS-Cache: Provide the ability to enable/disable cookies
Provide the ability to enable and disable fscache cookies.  A disabled cookie
will reject or ignore further requests to:

	Acquire a child cookie
	Invalidate and update backing objects
	Check the consistency of a backing object
	Allocate storage for backing page
	Read backing pages
	Write to backing pages

but still allows:

	Checks/waits on the completion of already in-progress objects
	Uncaching of pages
	Relinquishment of cookies

Two new operations are provided:

 (1) Disable a cookie:

	void fscache_disable_cookie(struct fscache_cookie *cookie,
				    bool invalidate);

     If the cookie is not already disabled, this locks the cookie against other
     dis/enablement ops, marks the cookie as being disabled, discards or
     invalidates any backing objects and waits for cessation of activity on any
     associated object.

     This is a wrapper around a chunk split out of fscache_relinquish_cookie(),
     but it reinitialises the cookie such that it can be reenabled.

     All possible failures are handled internally.  The caller should consider
     calling fscache_uncache_all_inode_pages() afterwards to make sure all page
     markings are cleared up.

 (2) Enable a cookie:

	void fscache_enable_cookie(struct fscache_cookie *cookie,
				   bool (*can_enable)(void *data),
				   void *data)

     If the cookie is not already enabled, this locks the cookie against other
     dis/enablement ops, invokes can_enable() and, if the cookie is not an
     index cookie, will begin the procedure of acquiring backing objects.

     The optional can_enable() function is passed the data argument and returns
     a ruling as to whether or not enablement should actually be permitted to
     begin.

     All possible failures are handled internally.  The cookie will only be
     marked as enabled if provisional backing objects are allocated.

A later patch will introduce these to NFS.  Cookie enablement during nfs_open()
is then contingent on i_writecount <= 0.  can_enable() checks for a race
between open(O_RDONLY) and open(O_WRONLY/O_RDWR).  This simplifies NFS's cookie
handling and allows us to get rid of open(O_RDONLY) accidentally introducing
caching to an inode that's open for writing already.

One operation has its API modified:

 (3) Acquire a cookie.

	struct fscache_cookie *fscache_acquire_cookie(
		struct fscache_cookie *parent,
		const struct fscache_cookie_def *def,
		void *netfs_data,
		bool enable);

     This now has an additional argument that indicates whether the requested
     cookie should be enabled by default.  It doesn't need the can_enable()
     function because the caller must prevent multiple calls for the same netfs
     object and it doesn't need to take the enablement lock because no one else
     can get at the cookie before this returns.

Signed-off-by: David Howells <dhowells@redhat.com
2013-09-27 18:40:25 +01:00
David Howells 8fb883f3e3 FS-Cache: Add use/unuse/wake cookie wrappers
Add wrapper functions for dealing with cookie->n_active:

 (*) __fscache_use_cookie() to increment it.

 (*) __fscache_unuse_cookie() to decrement and test against zero.

 (*) __fscache_wake_unused_cookie() to wake up anyone waiting for it to reach
     zero.

The second and third are split so that the third can be done after cookie->lock
has been released in case the waiter wakes up whilst we're still holding it and
tries to get it.

We will need to wake-on-zero once the cookie disablement patch is applied
because it will then be possible to see n_active become zero without the cookie
being relinquished.

Also move the cookie usement out of fscache_attr_changed_op() and into
fscache_attr_changed() and the operation struct so that cookie disablement
will be able to track it.

Whilst we're at it, only increment n_active if we're about to do
fscache_submit_op() so that we don't have to deal with undoing it if anything
earlier fails.  Possibly this should be moved into fscache_submit_op() which
could look at FSCACHE_OP_UNUSE_COOKIE.

Signed-off-by: David Howells <dhowells@redhat.com>
2013-09-27 18:40:25 +01:00
David Howells da9803bc88 FS-Cache: Add interface to check consistency of a cached object
Extend the fscache netfs API so that the netfs can ask as to whether a cache
object is up to date with respect to its corresponding netfs object:

	int fscache_check_consistency(struct fscache_cookie *cookie)

This will call back to the netfs to check whether the auxiliary data associated
with a cookie is correct.  It returns 0 if it is and -ESTALE if it isn't; it
may also return -ENOMEM and -ERESTARTSYS.

The backends now have to implement a mandatory operation pointer:

	int (*check_consistency)(struct fscache_object *object)

that corresponds to the above API call.  FS-Cache takes care of pinning the
object and the cookie in memory and managing this call with respect to the
object state.

Original-author: Hongyi Jia <jiayisuse@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hongyi Jia <jiayisuse@gmail.com>
cc: Milosz Tanski <milosz@adfin.com>
2013-09-06 09:17:30 +01:00
David Howells 1bb4b7f98f FS-Cache: The retrieval remaining-pages counter needs to be atomic_t
struct fscache_retrieval contains a count of the number of pages that still
need some processing (n_pages).  This is decremented as the pages are
processed.

However, this needs to be atomic as fscache_retrieval_complete() (I think) just
occasionally may be called from cachefiles_read_backing_file() and
cachefiles_read_copier() simultaneously.

This happens when an fscache_read_or_alloc_pages() request containing a lot of
pages (say a couple of hundred) is being processed.  The read on each backing
page is dispatched individually because we need to insert a monitor into the
waitqueue to catch when the read completes.  However, under low-memory
conditions, we might be forced to wait in the allocator - and this gives the
I/O on the backing page a chance to complete first.

When the I/O completes, fscache_enqueue_retrieval() chucks the retrieval onto
the workqueue without waiting for the operation to finish the initial I/O
dispatch (we want to release any pages we can as soon as we can), thus both can
end up running simultaneously and potentially attempting to partially complete
the retrieval simultaneously (ENOMEM may occur, backing pages may already be in
the page cache).

This was demonstrated by parallelling the non-atomic counter with an atomic
counter and printing both of them when the assertion fails.  At this point, the
atomic counter has reached zero, but the non-atomic counter has not.

To fix this, make the counter an atomic_t.

This results in the following bug appearing

	FS-Cache: Assertion failed
	3 == 5 is false
	------------[ cut here ]------------
	kernel BUG at fs/fscache/operation.c:421!

or

	FS-Cache: Assertion failed
	3 == 5 is false
	------------[ cut here ]------------
	kernel BUG at fs/fscache/operation.c:414!

With a backtrace like the following:

RIP: 0010:[<ffffffffa0211b1d>] fscache_put_operation+0x1ad/0x240 [fscache]
Call Trace:
 [<ffffffffa0213185>] fscache_retrieval_work+0x55/0x270 [fscache]
 [<ffffffffa0213130>] ? fscache_retrieval_work+0x0/0x270 [fscache]
 [<ffffffff81090b10>] worker_thread+0x170/0x2a0
 [<ffffffff81096d10>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff810909a0>] ? worker_thread+0x0/0x2a0
 [<ffffffff81096966>] kthread+0x96/0xa0
 [<ffffffff8100c0ca>] child_rip+0xa/0x20
 [<ffffffff810968d0>] ? kthread+0x0/0xa0
 [<ffffffff8100c0c0>] ? child_rip+0x0/0x20

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
2013-06-19 14:16:47 +01:00
David Howells 1362729b16 FS-Cache: Simplify cookie retention for fscache_objects, fixing oops
Simplify the way fscache cache objects retain their cookie.  The way I
implemented the cookie storage handling made synchronisation a pain (ie. the
object state machine can't rely on the cookie actually still being there).

Instead of the the object being detached from the cookie and the cookie being
freed in __fscache_relinquish_cookie(), we defer both operations:

 (*) The detachment of the object from the list in the cookie now takes place
     in fscache_drop_object() and is thus governed by the object state machine
     (fscache_detach_from_cookie() has been removed).

 (*) The release of the cookie is now in fscache_object_destroy() - which is
     called by the cache backend just before it frees the object.

This means that the fscache_cookie struct is now available to the cache all the
way through from ->alloc_object() to ->drop_object() and ->put_object() -
meaning that it's no longer necessary to take object->lock to guarantee access.

However, __fscache_relinquish_cookie() doesn't wait for the object to go all
the way through to destruction before letting the netfs proceed.  That would
massively slow down the netfs.  Since __fscache_relinquish_cookie() leaves the
cookie around, in must therefore break all attachments to the netfs - which
includes ->def, ->netfs_data and any outstanding page read/writes.

To handle this, struct fscache_cookie now has an n_active counter:

 (1) This starts off initialised to 1.

 (2) Any time the cache needs to get at the netfs data, it calls
     fscache_use_cookie() to increment it - if it is not zero.  If it was zero,
     then access is not permitted.

 (3) When the cache has finished with the data, it calls fscache_unuse_cookie()
     to decrement it.  This does a wake-up on it if it reaches 0.

 (4) __fscache_relinquish_cookie() decrements n_active and then waits for it to
     reach 0.  The initialisation to 1 in step (1) ensures that we only get
     wake ups when we're trying to get rid of the cookie.

This leaves __fscache_relinquish_cookie() a lot simpler.


***
This fixes a problem in the current code whereby if fscache_invalidate() is
followed sufficiently quickly by fscache_relinquish_cookie() then it is
possible for __fscache_relinquish_cookie() to have detached the cookie from the
object and cleared the pointer before a thread is dispatched to process the
invalidation state in the object state machine.

Since the pending write clearance was deferred to the invalidation state to
make it asynchronous, we need to either wait in relinquishment for the stores
tree to be cleared in the invalidation state or we need to handle the clearance
in relinquishment.

Further, if the relinquishment code does clear the tree, then the invalidation
state need to make the clearance contingent on still having the cookie to hand
(since that's where the tree is rooted) and we have to prevent the cookie from
disappearing for the duration.

This can lead to an oops like the following:

BUG: unable to handle kernel NULL pointer dereference at 000000000000000c
...
RIP: 0010:[<ffffffff8151023e>] _spin_lock+0xe/0x30
...
CR2: 000000000000000c ...
...
Process kslowd002 (...)
....
Call Trace:
 [<ffffffffa01c3278>] fscache_invalidate_writes+0x38/0xd0 [fscache]
 [<ffffffff810096f0>] ? __switch_to+0xd0/0x320
 [<ffffffff8105e759>] ? find_busiest_queue+0x69/0x150
 [<ffffffff8110ddd4>] ? slow_work_enqueue+0x104/0x180
 [<ffffffffa01c1303>] fscache_object_slow_work_execute+0x5e3/0x9d0 [fscache]
 [<ffffffff81096b67>] ? bit_waitqueue+0x17/0xd0
 [<ffffffff8110e233>] slow_work_execute+0x233/0x310
 [<ffffffff8110e515>] slow_work_thread+0x205/0x360
 [<ffffffff81096ca0>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff8110e310>] ? slow_work_thread+0x0/0x360
 [<ffffffff81096936>] kthread+0x96/0xa0
 [<ffffffff8100c0ca>] child_rip+0xa/0x20
 [<ffffffff810968a0>] ? kthread+0x0/0xa0
 [<ffffffff8100c0c0>] ? child_rip+0x0/0x20

The parameter to fscache_invalidate_writes() was object->cookie which is NULL.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
2013-06-19 14:16:47 +01:00
David Howells caaef6900b FS-Cache: Fix object state machine to have separate work and wait states
Fix object state machine to have separate work and wait states as that makes
it easier to envision.

There are now three kinds of state:

 (1) Work state.  This is an execution state.  No event processing is performed
     by a work state.  The function attached to a work state returns a pointer
     indicating the next state to which the OSM should transition.  Returning
     NO_TRANSIT repeats the current state, but goes back to the scheduler
     first.

 (2) Wait state.  This is an event processing state.  No execution is
     performed by a wait state.  Wait states are just tables of "if event X
     occurs, clear it and transition to state Y".  The dispatcher returns to
     the scheduler if none of the events in which the wait state has an
     interest are currently pending.

 (3) Out-of-band state.  This is a special work state.  Transitions to normal
     states can be overridden when an unexpected event occurs (eg. I/O error).
     Instead the dispatcher disables and clears the OOB event and transits to
     the specified work state.  This then acts as an ordinary work state,
     though object->state points to the overridden destination.  Returning
     NO_TRANSIT resumes the overridden transition.

In addition, the states have names in their definitions, so there's no need for
tables of state names.  Further, the EV_REQUEUE event is no longer necessary as
that is automatic for work states.

Since the states are now separate structs rather than values in an enum, it's
not possible to use comparisons other than (non-)equality between them, so use
some object->flags to indicate what phase an object is in.

The EV_RELEASE, EV_RETIRE and EV_WITHDRAW events have been squished into one
(EV_KILL).  An object flag now carries the information about retirement.

Similarly, the RELEASING, RECYCLING and WITHDRAWING states have been merged
into an KILL_OBJECT state and additional states have been added for handling
waiting dependent objects (JUMPSTART_DEPS and KILL_DEPENDENTS).

A state has also been added for synchronising with parent object initialisation
(WAIT_FOR_PARENT) and another for initiating look up (PARENT_READY).

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
2013-06-19 14:16:47 +01:00
David Howells 493f7bc114 FS-Cache: Wrap checks on object state
Wrap checks on object state (mostly outside of fs/fscache/object.c) with
inline functions so that the mechanism can be replaced.

Some of the state checks within object.c are left as-is as they will be
replaced.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
2013-06-19 14:16:47 +01:00
David Howells 610be24ee4 FS-Cache: Uninline fscache_object_init()
Uninline fscache_object_init() so as not to expose some of the FS-Cache
internals to the cache backend.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
2013-06-19 14:16:47 +01:00
David Howells 1f372dff1d FS-Cache: Mark cancellation of in-progress operation
Mark as cancelled an operation that is in progress rather than pending at the
time it is cancelled, and call fscache_complete_op() to cancel an operation so
that blocked ops can be started.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-20 22:34:00 +00:00
David Howells 36a02de5d7 FS-Cache: Convert the object event ID #defines into an enum
Convert the fscache_object event IDs from #defines into an enum.  Also add an
extra label to the enum to carry the event count and redefine the event mask
in terms of that.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-20 22:08:05 +00:00
David Howells ef778e7ae6 FS-Cache: Provide proper invalidation
Provide a proper invalidation method rather than relying on the netfs retiring
the cookie it has and getting a new one.  The problem with this is that isn't
easy for the netfs to make sure that it has completed/cancelled all its
outstanding storage and retrieval operations on the cookie it is retiring.

Instead, have the cache provide an invalidation method that will cancel or wait
for all currently outstanding operations before invalidating the cache, and
will cause new operations to queue up behind that.  Whilst invalidation is in
progress, some requests will be rejected until the cache can stack a barrier on
the operation queue to cause new operations to be deferred behind it.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-20 22:04:07 +00:00
David Howells 9f10523f89 FS-Cache: Fix operation state management and accounting
Fix the state management of internal fscache operations and the accounting of
what operations are in what states.

This is done by:

 (1) Give struct fscache_operation a enum variable that directly represents the
     state it's currently in, rather than spreading this knowledge over a bunch
     of flags, who's processing the operation at the moment and whether it is
     queued or not.

     This makes it easier to write assertions to check the state at various
     points and to prevent invalid state transitions.

 (2) Add an 'operation complete' state and supply a function to indicate the
     completion of an operation (fscache_op_complete()) and make things call
     it.  The final call to fscache_put_operation() can then check that an op
     in the appropriate state (complete or cancelled).

 (3) Adjust the use of object->n_ops, ->n_in_progress, ->n_exclusive to better
     govern the state of an object:

	(a) The ->n_ops is now the number of extant operations on the object
	    and is now decremented by fscache_put_operation() only.

	(b) The ->n_in_progress is simply the number of objects that have been
	    taken off of the object's pending queue for the purposes of being
	    run.  This is decremented by fscache_op_complete() only.

	(c) The ->n_exclusive is the number of exclusive ops that have been
	    submitted and queued or are in progress.  It is decremented by
	    fscache_op_complete() and by fscache_cancel_op().

     fscache_put_operation() and fscache_operation_gc() now no longer try to
     clean up ->n_exclusive and ->n_in_progress.  That was leading to double
     decrements against fscache_cancel_op().

     fscache_cancel_op() now no longer decrements ->n_ops.  That was leading to
     double decrements against fscache_put_operation().

     fscache_submit_exclusive_op() now decides whether it has to queue an op
     based on ->n_in_progress being > 0 rather than ->n_ops > 0 as the latter
     will persist in being true even after all preceding operations have been
     cancelled or completed.  Furthermore, if an object is active and there are
     runnable ops against it, there must be at least one op running.

 (4) Add a remaining-pages counter (n_pages) to struct fscache_retrieval and
     provide a function to record completion of the pages as they complete.

     When n_pages reaches 0, the operation is deemed to be complete and
     fscache_op_complete() is called.

     Add calls to fscache_retrieval_complete() anywhere we've finished with a
     page we've been given to read or allocate for.  This includes places where
     we just return pages to the netfs for reading from the server and where
     accessing the cache fails and we discard the proposed netfs page.

The bugs in the unfixed state management manifest themselves as oopses like the
following where the operation completion gets out of sync with return of the
cookie by the netfs.  This is possible because the cache unlocks and returns
all the netfs pages before recording its completion - which means that there's
nothing to stop the netfs discarding them and returning the cookie.


FS-Cache: Cookie 'NFS.fh' still has outstanding reads
------------[ cut here ]------------
kernel BUG at fs/fscache/cookie.c:519!
invalid opcode: 0000 [#1] SMP
CPU 1
Modules linked in: cachefiles nfs fscache auth_rpcgss nfs_acl lockd sunrpc

Pid: 400, comm: kswapd0 Not tainted 3.1.0-rc7-fsdevel+ #1090                  /DG965RY
RIP: 0010:[<ffffffffa007050a>]  [<ffffffffa007050a>] __fscache_relinquish_cookie+0x170/0x343 [fscache]
RSP: 0018:ffff8800368cfb00  EFLAGS: 00010282
RAX: 000000000000003c RBX: ffff880023cc8790 RCX: 0000000000000000
RDX: 0000000000002f2e RSI: 0000000000000001 RDI: ffffffff813ab86c
RBP: ffff8800368cfb50 R08: 0000000000000002 R09: 0000000000000000
R10: ffff88003a1b7890 R11: ffff88001df6e488 R12: ffff880023d8ed98
R13: ffff880023cc8798 R14: 0000000000000004 R15: ffff88003b8bf370
FS:  0000000000000000(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000008ba008 CR3: 0000000023d93000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kswapd0 (pid: 400, threadinfo ffff8800368ce000, task ffff88003b8bf040)
Stack:
 ffff88003b8bf040 ffff88001df6e528 ffff88001df6e528 ffffffffa00b46b0
 ffff88003b8bf040 ffff88001df6e488 ffff88001df6e620 ffffffffa00b46b0
 ffff88001ebd04c8 0000000000000004 ffff8800368cfb70 ffffffffa00b2c91
Call Trace:
 [<ffffffffa00b2c91>] nfs_fscache_release_inode_cookie+0x3b/0x47 [nfs]
 [<ffffffffa008f25f>] nfs_clear_inode+0x3c/0x41 [nfs]
 [<ffffffffa0090df1>] nfs4_evict_inode+0x2f/0x33 [nfs]
 [<ffffffff810d8d47>] evict+0xa1/0x15c
 [<ffffffff810d8e2e>] dispose_list+0x2c/0x38
 [<ffffffff810d9ebd>] prune_icache_sb+0x28c/0x29b
 [<ffffffff810c56b7>] prune_super+0xd5/0x140
 [<ffffffff8109b615>] shrink_slab+0x102/0x1ab
 [<ffffffff8109d690>] balance_pgdat+0x2f2/0x595
 [<ffffffff8103e009>] ? process_timeout+0xb/0xb
 [<ffffffff8109dba3>] kswapd+0x270/0x289
 [<ffffffff8104c5ea>] ? __init_waitqueue_head+0x46/0x46
 [<ffffffff8109d933>] ? balance_pgdat+0x595/0x595
 [<ffffffff8104bf7a>] kthread+0x7f/0x87
 [<ffffffff813ad6b4>] kernel_thread_helper+0x4/0x10
 [<ffffffff81026b98>] ? finish_task_switch+0x45/0xc0
 [<ffffffff813abcdd>] ? retint_restore_args+0xe/0xe
 [<ffffffff8104befb>] ? __init_kthread_worker+0x53/0x53
 [<ffffffff813ad6b0>] ? gs_change+0xb/0xb

Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-20 21:58:26 +00:00
David Howells ef46ed888e FS-Cache: Make cookie relinquishment wait for outstanding reads
Make fscache_relinquish_cookie() log a warning and wait if there are any
outstanding reads left on the cookie it was given.

Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-20 21:58:25 +00:00
David Howells c4d6d8dbf3 CacheFiles: Fix the marking of cached pages
Under some circumstances CacheFiles defers the marking of pages with PG_fscache
so that it can take advantage of pagevecs to reduce the number of calls to
fscache_mark_pages_cached() and the netfs's hook to keep track of this.

There are, however, two problems with this:

 (1) It can lead to the PG_fscache mark being applied _after_ the page is set
     PG_uptodate and unlocked (by the call to fscache_end_io()).

 (2) CacheFiles's ref on the page is dropped immediately following
     fscache_end_io() - and so may not still be held when the mark is applied.
     This can lead to the page being passed back to the allocator before the
     mark is applied.

Fix this by, where appropriate, marking the page before calling
fscache_end_io() and releasing the page.  This means that we can't take
advantage of pagevecs and have to make a separate call for each page to the
marking routines.

The symptoms of this are Bad Page state errors cropping up under memory
pressure, for example:

BUG: Bad page state in process tar  pfn:002da
page:ffffea0000009fb0 count:0 mapcount:0 mapping:          (null) index:0x1447
page flags: 0x1000(private_2)
Pid: 4574, comm: tar Tainted: G        W   3.1.0-rc4-fsdevel+ #1064
Call Trace:
 [<ffffffff8109583c>] ? dump_page+0xb9/0xbe
 [<ffffffff81095916>] bad_page+0xd5/0xea
 [<ffffffff81095d82>] get_page_from_freelist+0x35b/0x46a
 [<ffffffff810961f3>] __alloc_pages_nodemask+0x362/0x662
 [<ffffffff810989da>] __do_page_cache_readahead+0x13a/0x267
 [<ffffffff81098942>] ? __do_page_cache_readahead+0xa2/0x267
 [<ffffffff81098d7b>] ra_submit+0x1c/0x20
 [<ffffffff8109900a>] ondemand_readahead+0x28b/0x29a
 [<ffffffff81098ee2>] ? ondemand_readahead+0x163/0x29a
 [<ffffffff810990ce>] page_cache_sync_readahead+0x38/0x3a
 [<ffffffff81091d8a>] generic_file_aio_read+0x2ab/0x67e
 [<ffffffffa008cfbe>] nfs_file_read+0xa4/0xc9 [nfs]
 [<ffffffff810c22c4>] do_sync_read+0xba/0xfa
 [<ffffffff81177a47>] ? security_file_permission+0x7b/0x84
 [<ffffffff810c25dd>] ? rw_verify_area+0xab/0xc8
 [<ffffffff810c29a4>] vfs_read+0xaa/0x13a
 [<ffffffff810c2a79>] sys_read+0x45/0x6c
 [<ffffffff813ac37b>] system_call_fastpath+0x16/0x1b

As can be seen, PG_private_2 (== PG_fscache) is set in the page flags.

Instrumenting fscache_mark_pages_cached() to verify whether page->mapping was
set appropriately showed that sometimes it wasn't.  This led to the discovery
that sometimes the page has apparently been reclaimed by the time the marker
got to see it.

Reported-by: M. Stevens <m@tippett.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
2012-12-20 21:54:30 +00:00
Joe Perches b9075fa968 treewide: use __printf not __attribute__((format(printf,...)))
Standardize the style for compiler based printf format verification.
Standardized the location of __printf too.

Done via script and a little typing.

$ grep -rPl --include=*.[ch] -w "__attribute__" * | \
  grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \
  xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }'

[akpm@linux-foundation.org: revert arch bits]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:54 -07:00
Amerigo Wang e50c1f609c fscache: remove dead code under CONFIG_WORKQUEUE_DEBUGFS
There is no CONFIG_WORKQUEUE_DEBUGFS any more, so this code is dead.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:44 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Tejun Heo d098adfb7d fscache: drop references to slow-work
fscache no longer uses slow-work.  Drop references to it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
2010-07-22 22:58:58 +02:00
Tejun Heo 8af7c12436 fscache: convert operation to use workqueue instead of slow-work
Make fscache operation to use only workqueue instead of combination of
workqueue and slow-work.  FSCACHE_OP_SLOW is dropped and
FSCACHE_OP_FAST is renamed to FSCACHE_OP_ASYNC and uses newly added
fscache_op_wq workqueue to execute op->processor().
fscache_operation_init_slow() is dropped and fscache_operation_init()
now takes @processor argument directly.

* Unbound workqueue is used.

* fscache_retrieval_work() is no longer necessary as OP_ASYNC now does
  the equivalent thing.

* sysctl fscache.operation_max_active added to control concurrency.
  The default value is nr_cpus clamped between 2 and
  WQ_UNBOUND_MAX_ACTIVE.

* debugfs support is dropped for now.  Tracing API based debug
  facility is planned to be added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
2010-07-22 22:58:47 +02:00
Tejun Heo 8b8edefa2f fscache: convert object to use workqueue instead of slow-work
Make fscache object state transition callbacks use workqueue instead
of slow-work.  New dedicated unbound CPU workqueue fscache_object_wq
is created.  get/put callbacks are renamed and modified to take
@object and called directly from the enqueue wrapper and the work
function.  While at it, make all open coded instances of get/put to
use fscache_get/put_object().

* Unbound workqueue is used.

* work_busy() output is printed instead of slow-work flags in object
  debugging outputs.  They mean basically the same thing bit-for-bit.

* sysctl fscache.object_max_active added to control concurrency.  The
  default value is nr_cpus clamped between 4 and
  WQ_UNBOUND_MAX_ACTIVE.

* slow_work_sleep_till_thread_needed() is replaced with fscache
  private implementation fscache_object_sleep_till_congested() which
  waits on fscache_object_wq congestion.

* debugfs support is dropped for now.  Tracing API based debug
  facility is planned to be added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
2010-07-22 22:58:34 +02:00
David Howells a53f4f9efa SLOW_WORK: CONFIG_SLOW_WORK_PROC should be CONFIG_SLOW_WORK_DEBUG
CONFIG_SLOW_WORK_PROC was changed to CONFIG_SLOW_WORK_DEBUG, but not in all
instances.  Change the remaining instances.  This makes the debugfs file
display the time mark and the owner's description again.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-29 09:14:47 -07:00
David Howells fee096deb4 CacheFiles: Catch an overly long wait for an old active object
Catch an overly long wait for an old, dying active object when we want to
replace it with a new one.  The probability is that all the slow-work threads
are hogged, and the delete can't get a look in.

What we do instead is:

 (1) if there's nothing in the slow work queue, we sleep until either the dying
     object has finished dying or there is something in the slow work queue
     behind which we can queue our object.

 (2) if there is something in the slow work queue, we return ETIMEDOUT to
     fscache_lookup_object(), which then puts us back on the slow work queue,
     presumably behind the deletion that we're blocked by.  We are then
     deferred for a while until we work our way back through the queue -
     without blocking a slow-work thread unnecessarily.

A backtrace similar to the following may appear in the log without this patch:

	INFO: task kslowd004:5711 blocked for more than 120 seconds.
	"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
	kslowd004     D 0000000000000000     0  5711      2 0x00000080
	 ffff88000340bb80 0000000000000046 ffff88002550d000 0000000000000000
	 ffff88002550d000 0000000000000007 ffff88000340bfd8 ffff88002550d2a8
	 000000000000ddf0 00000000000118c0 00000000000118c0 ffff88002550d2a8
	Call Trace:
	 [<ffffffff81058e21>] ? trace_hardirqs_on+0xd/0xf
	 [<ffffffffa011c4d8>] ? cachefiles_wait_bit+0x0/0xd [cachefiles]
	 [<ffffffffa011c4e1>] cachefiles_wait_bit+0x9/0xd [cachefiles]
	 [<ffffffff81353153>] __wait_on_bit+0x43/0x76
	 [<ffffffff8111ae39>] ? ext3_xattr_get+0x1ec/0x270
	 [<ffffffff813531ef>] out_of_line_wait_on_bit+0x69/0x74
	 [<ffffffffa011c4d8>] ? cachefiles_wait_bit+0x0/0xd [cachefiles]
	 [<ffffffff8104c125>] ? wake_bit_function+0x0/0x2e
	 [<ffffffffa011bc79>] cachefiles_mark_object_active+0x203/0x23b [cachefiles]
	 [<ffffffffa011c209>] cachefiles_walk_to_object+0x558/0x827 [cachefiles]
	 [<ffffffffa011a429>] cachefiles_lookup_object+0xac/0x12a [cachefiles]
	 [<ffffffffa00aa1e9>] fscache_lookup_object+0x1c7/0x214 [fscache]
	 [<ffffffffa00aafc5>] fscache_object_state_machine+0xa5/0x52d [fscache]
	 [<ffffffffa00ab4ac>] fscache_object_slow_work_execute+0x5f/0xa0 [fscache]
	 [<ffffffff81082093>] slow_work_execute+0x18f/0x2d1
	 [<ffffffff8108239a>] slow_work_thread+0x1c5/0x308
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffff810821d5>] ? slow_work_thread+0x0/0x308
	 [<ffffffff8104be91>] kthread+0x7a/0x82
	 [<ffffffff8100beda>] child_rip+0xa/0x20
	 [<ffffffff8100b87c>] ? restore_args+0x0/0x30
	 [<ffffffff8104be17>] ? kthread+0x0/0x82
	 [<ffffffff8100bed0>] ? child_rip+0x0/0x20
	1 lock held by kslowd004/5711:
	 #0:  (&sb->s_type->i_mutex_key#7/1){+.+.+.}, at: [<ffffffffa011be64>] cachefiles_walk_to_object+0x1b3/0x827 [cachefiles]

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:12:05 +00:00
David Howells a17754fb8c CacheFiles: Don't write a full page if there's only a partial page to cache
cachefiles_write_page() writes a full page to the backing file for the last
page of the netfs file, even if the netfs file's last page is only a partial
page.

This causes the EOF on the backing file to be extended beyond the EOF of the
netfs, and thus the backing file will be truncated by cachefiles_attr_changed()
called from cachefiles_lookup_object().

So we need to limit the write we make to the backing file on that last page
such that it doesn't push the EOF too far.

Also, if a backing file that has a partial page at the end is expanded, we
discard the partial page and refetch it on the basis that we then have a hole
in the file with invalid data, and should the power go out...  A better way to
deal with this could be to record a note that the partial page contains invalid
data until the correct data is written into it.

This isn't a problem for netfs's that discard the whole backing file if the
file size changes (such as NFS).

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:11:52 +00:00
David Howells 60d543ca72 FS-Cache: Start processing an object's operations on that object's death
Start processing an object's operations when that object moves into the DYING
state as the object cannot be destroyed until all its outstanding operations
have completed.

Furthermore, make sure that read and allocation operations handle being woken
up on a dead object.  Such events are recorded in the Allocs.abt and
Retrvls.abt statistics as viewable through /proc/fs/fscache/stats.

The code for waiting for object activation for the read and allocation
operations is also extracted into its own function as it is much the same in
all cases, differing only in the stats incremented.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:11:45 +00:00
David Howells 201a15428b FS-Cache: Handle pages pending storage that get evicted under OOM conditions
Handle netfs pages that the vmscan algorithm wants to evict from the pagecache
under OOM conditions, but that are waiting for write to the cache.  Under these
conditions, vmscan calls the releasepage() function of the netfs, asking if a
page can be discarded.

The problem is typified by the following trace of a stuck process:

	kslowd005     D 0000000000000000     0  4253      2 0x00000080
	 ffff88001b14f370 0000000000000046 ffff880020d0d000 0000000000000007
	 0000000000000006 0000000000000001 ffff88001b14ffd8 ffff880020d0d2a8
	 000000000000ddf0 00000000000118c0 00000000000118c0 ffff880020d0d2a8
	Call Trace:
	 [<ffffffffa00782d8>] __fscache_wait_on_page_write+0x8b/0xa7 [fscache]
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffffa0078240>] ? __fscache_check_page_write+0x63/0x70 [fscache]
	 [<ffffffffa00b671d>] nfs_fscache_release_page+0x4e/0xc4 [nfs]
	 [<ffffffffa00927f0>] nfs_release_page+0x3c/0x41 [nfs]
	 [<ffffffff810885d3>] try_to_release_page+0x32/0x3b
	 [<ffffffff81093203>] shrink_page_list+0x316/0x4ac
	 [<ffffffff8109372b>] shrink_inactive_list+0x392/0x67c
	 [<ffffffff813532fa>] ? __mutex_unlock_slowpath+0x100/0x10b
	 [<ffffffff81058df0>] ? trace_hardirqs_on_caller+0x10c/0x130
	 [<ffffffff8135330e>] ? mutex_unlock+0x9/0xb
	 [<ffffffff81093aa2>] shrink_list+0x8d/0x8f
	 [<ffffffff81093d1c>] shrink_zone+0x278/0x33c
	 [<ffffffff81052d6c>] ? ktime_get_ts+0xad/0xba
	 [<ffffffff81094b13>] try_to_free_pages+0x22e/0x392
	 [<ffffffff81091e24>] ? isolate_pages_global+0x0/0x212
	 [<ffffffff8108e743>] __alloc_pages_nodemask+0x3dc/0x5cf
	 [<ffffffff81089529>] grab_cache_page_write_begin+0x65/0xaa
	 [<ffffffff8110f8c0>] ext3_write_begin+0x78/0x1eb
	 [<ffffffff81089ec5>] generic_file_buffered_write+0x109/0x28c
	 [<ffffffff8103cb69>] ? current_fs_time+0x22/0x29
	 [<ffffffff8108a509>] __generic_file_aio_write+0x350/0x385
	 [<ffffffff8108a588>] ? generic_file_aio_write+0x4a/0xae
	 [<ffffffff8108a59e>] generic_file_aio_write+0x60/0xae
	 [<ffffffff810b2e82>] do_sync_write+0xe3/0x120
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffff810b18e1>] ? __dentry_open+0x1a5/0x2b8
	 [<ffffffff810b1a76>] ? dentry_open+0x82/0x89
	 [<ffffffffa00e693c>] cachefiles_write_page+0x298/0x335 [cachefiles]
	 [<ffffffffa0077147>] fscache_write_op+0x178/0x2c2 [fscache]
	 [<ffffffffa0075656>] fscache_op_execute+0x7a/0xd1 [fscache]
	 [<ffffffff81082093>] slow_work_execute+0x18f/0x2d1
	 [<ffffffff8108239a>] slow_work_thread+0x1c5/0x308
	 [<ffffffff8104c0f1>] ? autoremove_wake_function+0x0/0x34
	 [<ffffffff810821d5>] ? slow_work_thread+0x0/0x308
	 [<ffffffff8104be91>] kthread+0x7a/0x82
	 [<ffffffff8100beda>] child_rip+0xa/0x20
	 [<ffffffff8100b87c>] ? restore_args+0x0/0x30
	 [<ffffffff8102ef83>] ? tg_shares_up+0x171/0x227
	 [<ffffffff8104be17>] ? kthread+0x0/0x82
	 [<ffffffff8100bed0>] ? child_rip+0x0/0x20

In the above backtrace, the following is happening:

 (1) A page storage operation is being executed by a slow-work thread
     (fscache_write_op()).

 (2) FS-Cache farms the operation out to the cache to perform
     (cachefiles_write_page()).

 (3) CacheFiles is then calling Ext3 to perform the actual write, using Ext3's
     standard write (do_sync_write()) under KERNEL_DS directly from the netfs
     page.

 (4) However, for Ext3 to perform the write, it must allocate some memory, in
     particular, it must allocate at least one page cache page into which it
     can copy the data from the netfs page.

 (5) Under OOM conditions, the memory allocator can't immediately come up with
     a page, so it uses vmscan to find something to discard
     (try_to_free_pages()).

 (6) vmscan finds a clean netfs page it might be able to discard (possibly the
     one it's trying to write out).

 (7) The netfs is called to throw the page away (nfs_release_page()) - but it's
     called with __GFP_WAIT, so the netfs decides to wait for the store to
     complete (__fscache_wait_on_page_write()).

 (8) This blocks a slow-work processing thread - possibly against itself.

The system ends up stuck because it can't write out any netfs pages to the
cache without allocating more memory.

To avoid this, we make FS-Cache cancel some writes that aren't in the middle of
actually being performed.  This means that some data won't make it into the
cache this time.  To support this, a new FS-Cache function is added
fscache_maybe_release_page() that replaces what the netfs releasepage()
functions used to do with respect to the cache.

The decisions fscache_maybe_release_page() makes are counted and displayed
through /proc/fs/fscache/stats on a line labelled "VmScan".  There are four
counters provided: "nos=N" - pages that weren't pending storage; "gon=N" -
pages that were pending storage when we first looked, but weren't by the time
we got the object lock; "bsy=N" - pages that we ignored as they were actively
being written when we looked; and "can=N" - pages that we cancelled the storage
of.

What I'd really like to do is alter the behaviour of the cancellation
heuristics, depending on how necessary it is to expel pages.  If there are
plenty of other pages that aren't waiting to be written to the cache that
could be ejected first, then it would be nice to hold up on immediate
cancellation of cache writes - but I don't see a way of doing that.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:11:35 +00:00
David Howells 1bccf513ac FS-Cache: Fix lock misorder in fscache_write_op()
FS-Cache has two structs internally for keeping track of the internal state of
a cached file: the fscache_cookie struct, which represents the netfs's state,
and fscache_object struct, which represents the cache's state.  Each has a
pointer that points to the other (when both are in existence), and each has a
spinlock for pointer maintenance.

Since netfs operations approach these structures from the cookie side, they get
the cookie lock first, then the object lock.  Cache operations, on the other
hand, approach from the object side, and get the object lock first.  It is not
then permitted for a cache operation to get the cookie lock whilst it is
holding the object lock lest deadlock occur; instead, it must do one of two
things:

 (1) increment the cookie usage counter, drop the object lock and then get both
     locks in order, or

 (2) simply hold the object lock as certain parts of the cookie may not be
     altered whilst the object lock is held.

It is also not permitted to follow either pointer without holding the lock at
the end you start with.  To break the pointers between the cookie and the
object, both locks must be held.

fscache_write_op(), however, violates the locking rules: It attempts to get the
cookie lock without (a) checking that the cookie pointer is a valid pointer,
and (b) holding the object lock to protect the cookie pointer whilst it follows
it.  This is so that it can access the pending page store tree without
interference from __fscache_write_page().

This is fixed by splitting the cookie lock, such that the page store tracking
tree is protected by its own lock, and checking that the cookie pointer is
non-NULL before we attempt to follow it whilst holding the object lock.

The new lock is subordinate to both the cookie lock and the object lock, and so
should be taken after those.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:11:25 +00:00
David Howells 4fbf4291aa FS-Cache: Allow the current state of all objects to be dumped
Allow the current state of all fscache objects to be dumped by doing:

	cat /proc/fs/fscache/objects

By default, all objects and all fields will be shown.  This can be restricted
by adding a suitable key to one of the caller's keyrings (such as the session
keyring):

	keyctl add user fscache:objlist "<restrictions>" @s

The <restrictions> are:

	K	Show hexdump of object key (don't show if not given)
	A	Show hexdump of object aux data (don't show if not given)

And paired restrictions:

	C	Show objects that have a cookie
	c	Show objects that don't have a cookie
	B	Show objects that are busy
	b	Show objects that aren't busy
	W	Show objects that have pending writes
	w	Show objects that don't have pending writes
	R	Show objects that have outstanding reads
	r	Show objects that don't have outstanding reads
	S	Show objects that have slow work queued
	s	Show objects that don't have slow work queued

If neither side of a restriction pair is given, then both are implied.  For
example:

	keyctl add user fscache:objlist KB @s

shows objects that are busy, and lists their object keys, but does not dump
their auxiliary data.  It also implies "CcWwRrSs", but as 'B' is given, 'b' is
not implied.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:11:04 +00:00
David Howells 440f0affe2 FS-Cache: Annotate slow-work runqueue proc lines for FS-Cache work items
Annotate slow-work runqueue proc lines for FS-Cache work items.  Objects
include the object ID and the state.  Operations include the object ID, the
operation ID and the operation type and state.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:11:01 +00:00
David Howells 7394daa8c6 FS-Cache: Add use of /proc and presentation of statistics
Make FS-Cache create its /proc interface and present various statistical
information through it.  Also provide the functions for updating this
information.

These features are enabled by:

	CONFIG_FSCACHE_PROC
	CONFIG_FSCACHE_STATS
	CONFIG_FSCACHE_HISTOGRAM

The /proc directory for FS-Cache is also exported so that caching modules can
add their own statistics there too.

The FS-Cache module is loadable at this point, and the statistics files can be
examined by userspace:

	cat /proc/fs/fscache/stats
	cat /proc/fs/fscache/histogram

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:37 +01:00
David Howells 0dfc41d1ef FS-Cache: Add the FS-Cache cache backend API and documentation
Add the API for a generic facility (FS-Cache) by which caches may declare them
selves open for business, and may obtain work to be done from network
filesystems.  The header file is included by:

	#include <linux/fscache-cache.h>

Documentation for the API is also added to:

	Documentation/filesystems/caching/backend-api.txt

This API is not usable without the implementation of the utility functions
which will be added in further patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00