Граф коммитов

25 Коммитов

Автор SHA1 Сообщение Дата
Radim Krčmář a3e1311549 KVM: i8254: remove pit and kvm from kvm_kpit_state
kvm isn't ever used and pit can be accessed with container_of.
If you *really* need kvm, pit_state_to_pit(ps)->kvm.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04 09:30:12 +01:00
Radim Krčmář 71474e2f0f KVM: i8254: remove notifiers from PIT discard policy
Discard policy doesn't rely on information from notifiers, so we don't
need to register notifiers unconditionally.  We kept correct counts in
case userspace switched between policies during runtime, but that can be
avoided by reseting the state.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04 09:30:01 +01:00
Radim Krčmář b39c90b656 KVM: i8254: remove unnecessary uses of PIT state lock
- kvm_create_pit had to lock only because it exposed kvm->arch.vpit very
  early, but initialization doesn't use kvm->arch.vpit since the last
  patch, so we can drop locking.
- kvm_free_pit is only run after there are no users of KVM and therefore
  is the sole actor.
- Locking in kvm_vm_ioctl_reinject doesn't do anything, because reinject
  is only protected at that place.
- kvm_pit_reset isn't used anywhere and its locking can be dropped if we
  hide it.

Removing useless locking allows to see what actually is being protected
by PIT state lock (values accessible from the guest).

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04 09:29:58 +01:00
Radim Krčmář 09edea72b7 KVM: i8254: pass struct kvm_pit instead of kvm in PIT
This patch passes struct kvm_pit into internal PIT functions.
Those functions used to get PIT through kvm->arch.vpit, even though most
of them never used *kvm for other purposes.  Another benefit is that we
don't need to set kvm->arch.vpit during initialization.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04 09:29:55 +01:00
Radim Krčmář ddf54503e2 KVM: i8254: use atomic_t instead of pit.inject_lock
The lock was an overkill, the same can be done with atomics.

A mb() was added in kvm_pit_ack_irq, to pair with implicit barrier
between pit_timer_fn and pit_do_work.  The mb() prevents a race that
could happen if pending == 0 and irq_ack == 0:

  kvm_pit_ack_irq:                | pit_timer_fn:
   p = atomic_read(&ps->pending); |
                                  |  atomic_inc(&ps->pending);
                                  |  queue_work(pit_do_work);
                                  | pit_do_work:
                                  |  atomic_xchg(&ps->irq_ack, 0);
                                  |  return;
   atomic_set(&ps->irq_ack, 1);   |
   if (p == 0) return;            |

where the interrupt would not be delivered in this tick of pit_timer_fn.
PIT would have eventually delivered the interrupt, but we sacrifice
perofmance to make sure that interrupts are not needlessly delayed.

sfence isn't enough: atomic_dec_if_positive does atomic_read first and
x86 can reorder loads before stores.  lfence isn't enough: store can
pass lfence, turning it into a nop.  A compiler barrier would be more
than enough as CPU needs to stall for unbelievably long to use fences.

This patch doesn't do anything in kvm_pit_reset_reinject, because any
order of resets can race, but the result differs by at most one
interrupt, which is ok, because it's the same result as if the reset
happened at a slightly different time.  (Original code didn't protect
the reset path with a proper lock, so users have to be robust.)

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04 09:29:47 +01:00
Andre Przywara af669ac6dc KVM: move iodev.h from virt/kvm/ to include/kvm
iodev.h contains definitions for the kvm_io_bus framework. This is
needed both by the generic KVM code in virt/kvm as well as by
architecture specific code under arch/. Putting the header file in
virt/kvm and using local includes in the architecture part seems at
least dodgy to me, so let's move the file into include/kvm, so that a
more natural "#include <kvm/iodev.h>" can be used by all of the code.
This also solves a problem later when using struct kvm_io_device
in arm_vgic.h.
Fixing up the FSF address in the GPL header and a wrong include path
on the way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-03-26 21:43:12 +00:00
Avi Kivity 26ef19242f KVM: fold kvm_pit_timer into kvm_kpit_state
One structure nests inside the other, providing no value at all.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-08-01 00:21:07 -03:00
Avi Kivity 9d9d2239bd KVM: Simplify kvm_pit_timer
'timer_mode_mask' is unused
'tscdeadline' is unused
't_ops' only adds needless indirection
'vcpu' is unused

Remove.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-08-01 00:21:07 -03:00
Avi Kivity e9d90d472d KVM: Remove internal timer abstraction
kvm_timer_fn(), the sole inhabitant of timer.c, is only used by lapic.c. Move
it there to make it easier to hack on it.

struct kvm_timer is a thin wrapper around hrtimer, and only adds obfuscation.
Move near its two users (with different names) to prepare for simplification.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-08-01 00:21:06 -03:00
Jan Kiszka b6ddf05ff6 KVM: x86: Run PIT work in own kthread
We can't run PIT IRQ injection work in the interrupt context of the host
timer. This would allow the user to influence the handler complexity by
asking for a broadcast to a large number of VCPUs. Therefore, this work
was pushed into workqueue context in 9d244caf2e. However, this prevents
prioritizing the PIT injection over other task as workqueues share
kernel threads.

This replaces the workqueue with a kthread worker and gives that thread
a name in the format "kvm-pit/<owner-process-pid>". That allows to
identify and adjust the kthread priority according to the VM process
parameters.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-04-27 19:40:29 -03:00
Duan Jiong 49704f2658 KVM: remove useless function declaration kvm_inject_pit_timer_irqs()
Just remove useless function define kvm_inject_pit_timer_irqs() from
file arch/x86/kvm/i8254.h

Signed-off-by:Duan Jiong<djduanjiong@gmail.com>

Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:09 -04:00
Justin P. Mattock 0be839bfb4 KVM: Remove base_addresss in kvm_pit since it is unused
The patch below removes unsigned long base_addresss; in i8254.h
since it is unused.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-05-11 07:57:03 -04:00
Chris Lalancette 33572ac0ad KVM: x86: Introduce a workqueue to deliver PIT timer interrupts
We really want to "kvm_set_irq" during the hrtimer callback,
but that is risky because that is during interrupt context.
Instead, offload the work to a workqueue, which is a bit safer
and should provide most of the same functionality.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:49 +03:00
Thomas Gleixner fa8273e954 KVM: Convert i8254/i8259 locks to raw_spinlocks
The i8254/i8259 locks need to be real spinlocks on preempt-rt. Convert
them to raw_spinlock. No change for !RT kernels.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:12 -03:00
Beth Kon e9f4275732 KVM: PIT support for HPET legacy mode
When kvm is in hpet_legacy_mode, the hpet is providing the timer
interrupt and the pit should not be. So in legacy mode, the pit timer
is destroyed, but the *state* of the pit is maintained. So if kvm or
the guest tries to modify the state of the pit, this modification is
accepted, *except* that the timer isn't actually started. When we exit
hpet_legacy_mode, the current state of the pit (which is up to date
since we've been accepting modifications) is used to restart the pit
timer.

The saved_mode code in kvm_pit_load_count temporarily changes mode to
0xff in order to destroy the timer, but then restores the actual
value, again maintaining "current" state of the pit for possible later
reenablement.

[avi: add some reserved storage in the ioctl; make SET_PIT2 IOW]
[marcelo: fix memory corruption due to reserved storage]

Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:12 +03:00
Jan Kiszka c5ff41ce66 KVM: Allow PIT emulation without speaker port
The in-kernel speaker emulation is only a dummy and also unneeded from
the performance point of view. Rather, it takes user space support to
generate sound output on the host, e.g. console beeps.

To allow this, introduce KVM_CREATE_PIT2 which controls in-kernel
speaker port emulation via a flag passed along the new IOCTL. It also
leaves room for future extensions of the PIT configuration interface.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:41 +03:00
Marcelo Tosatti d3c7b77d1a KVM: unify part of generic timer handling
Hide the internals of vcpu awakening / injection from the in-kernel
emulated timers. This makes future changes in this logic easier and
decreases the distance to more generic timer handling.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:25 +03:00
Marcelo Tosatti 5a05d54554 KVM: PIT: remove unused scheduled variable
Unused.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:25 +03:00
Avi Kivity 4780c65904 KVM: Reset PIT irq injection logic when the PIT IRQ is unmasked
While the PIT is masked the guest cannot ack the irq, so the reinject logic
will never allow the interrupt to be injected.

Fix by resetting the reinjection counters on unmask.

Unbreaks Xen.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:03 +02:00
Marcelo Tosatti 52d939a0bf KVM: PIT: provide an option to disable interrupt reinjection
Certain clocks (such as TSC) in older 2.6 guests overaccount for lost
ticks, causing severe time drift. Interrupt reinjection magnifies the
problem.

Provide an option to disable it.

[avi: allow room for expansion in case we want to disable reinjection
      of other timers]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:55 +02:00
Sheng Yang 5550af4df1 KVM: Fix guest shared interrupt with in-kernel irqchip
Every call of kvm_set_irq() should offer an irq_source_id, which is
allocated by kvm_request_irq_source_id(). Based on irq_source_id, we
identify the irq source and implement logical OR for shared level
interrupts.

The allocated irq_source_id can be freed by kvm_free_irq_source_id().

Currently, we support at most sizeof(unsigned long) different irq sources.

[Amit: - rebase to kvm.git HEAD
       - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file
       - move kvm_request_irq_source_id to the update_irq ioctl]

[Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2008-10-28 14:21:34 +02:00
Marcelo Tosatti 3cf57fed21 KVM: PIT: fix injection logic and count
The PIT injection logic is problematic under the following cases:

1) If there is a higher priority vector to be delivered by the time
kvm_pit_timer_intr_post is invoked ps->inject_pending won't be set.
This opens the possibility for missing many PIT event injections (say if
guest executes hlt at this point).

2) ps->inject_pending is racy with more than two vcpus. Since there's no locking
around read/dec of pt->pending, two vcpu's can inject two interrupts for a single
pt->pending count.

Fix 1 by using an irq ack notifier: only reinject when the previous irq
has been acked. Fix 2 with appropriate locking around manipulation of
pending count and irq_ack by the injection / ack paths.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-10-15 10:15:17 +02:00
Sheng Yang 308b0f239e KVM: Add reset support for in kernel PIT
Separate the reset part and prepare for reset support.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:00:23 +03:00
Sheng Yang e0f63cb927 KVM: Add save/restore supporting of in kernel PIT
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:00:22 +03:00
Sheng Yang 7837699fa6 KVM: In kernel PIT model
The patch moves the PIT model from userspace to kernel, and increases
the timer accuracy greatly.

[marcelo: make last_injected_time per-guest]

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Tested-and-Acked-by: Alex Davis <alex14641@yahoo.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-27 12:00:21 +03:00