Граф коммитов

17523 Коммитов

Автор SHA1 Сообщение Дата
Takashi Iwai 276ab336b4 ALSA: hda - Improve loopback path lookups for AD1983
AD1983 has flexible loopback routes and the generic parser would take
wrong path confusingly instead of taking individual paths via NID 0x0c
and 0x0d.  For avoiding it, limit the connections at these widgets so
that the parser can think more straightforwardly.  This fixes the
regression of the missing line-in loopback on Dell machine.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05 08:49:41 +01:00
Takashi Iwai c20f31ec42 ALSA: hda - Fix missing VREF setup for Mac Pro 1,1
Mac Pro 1,1 with ALC889A codec needs the VREF setup on NID 0x18 to
VREF50, in order to make the speaker working.  The same fixup was
already needed for MacBook Air 1,1, so we can reuse it.

Reported-by: Nicolai Beuermann <mail@nico-beuermann.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05 07:38:07 +01:00
Takashi Iwai c7579fed1f ALSA: hda - Add missing mixer widget for AD1983
The mixer widget on AD1983 at NID 0x0e was missing in the commit
[f2f8be43c5c9: ALSA: hda - Add aamix NID to AD codecs].

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05 07:30:50 +01:00
Takashi Iwai d3c56568f4 ALSA: hda/realtek - Avoid invalid COEFs for ALC271X
We've seen often problems after suspend/resume on Acer Aspire One
AO725 with ALC271X codec as reported in kernel bugzilla, and it turned
out that some COEFs doesn't work and triggers the codec communication
stall.

Since these magic COEF setups are specific to ALC269VB for some PLL
configurations, the machine works even without these manual
adjustment.  So, let's simply avoid applying them for ALC271X.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-05 07:17:49 +01:00
Takashi Iwai 4528eb19b0 ALSA: hda - Fix silent output on Toshiba Satellite L40
Toshiba Satellite L40 with AD1986A codec requires the EAPD of NID 0x1b
to be constantly on, otherwise the output doesn't work.
Unlike most of other AD1986A machines, EAPD is correctly implemented
in HD-audio manner (that is, bit set = amp on), so we need to clear
the inv_eapd flag in the fixup, too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67481
Cc: <stable@vger.kernel.org> [v3.11+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-04 07:39:06 +01:00
Takashi Iwai 4fa71c1550 ALSA: usb-audio: Add missing kconfig dependecy
The commit 44dcbbb1cd introduced the usage of bitreverse helpers but
forgot to add the dependency.  This patch adds the selection for
CONFIG_BITREVERSE.

Fixes: 44dcbbb1cd ('ALSA: snd-usb: add support for bit-reversed byte formats')
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-03 09:42:45 +01:00
Linus Torvalds 14864a52cd sound fixes for 3.14-rc1
The big chunks here are the updates for oxygen driver for Xonar DG
 devices, which were slipped from the previous pull request.  They are
 device-specific and thus not too dangerous.
 
 Other than that, all patches are small bug fixes, mainly for Samsung
 build fixes, a few HD-audio enhancements, and other misc ASoC fixes.
 (And this time ASoC merge is less than Octopus, lucky seven :)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS69k+AAoJEGwxgFQ9KSmk6pMQAIbo4mBrMzdkt7elEErpdpDj
 4P11/owXL+/gD+fTVXyTubvalXN9MATUWnHbLqi9qTYWx7u/RjnP32PQ0aMSyq1r
 PJq99Or+H+H2ui1dTsgIg2A8pYvbeuzU+Y7UcTusy9IolZNvKTNHVJRL79QQzNrp
 JTX220K4wLAjrl96fOtJ2gpABSej2kLdJ8Tj+YE7eMzySw+nS18nwoca2l3GPcR4
 qAyDQ0owgOWmBBaExSAgC9ck0l6NVSAba9r1ub156Szf0htmv5+pHqv3JJjKVTc/
 NmD/XVZxT7jEucPb6tAvmSfAqQBm97mX3nXVKQd3+QlH3pRI0pifS4ZOgRqJUZr/
 XZnM5lB17kd7XCBqnik+Nk9EmBRgF5ASRatVE+Mg469i9GBzqQOv0NTEsqL+Vhmb
 6tng5hBOV8o3v4/Z3uPVMtTEP+UYj+d8YseleNV5OI7dfjqQPZHWTeCllKl42Rra
 Ui5P1V1i1KD2jgiqbLR4XYmkMbXY31o5I6BvKb1iJ2jVn0igtrFpcD28Z+ufENLk
 /618pjpJH9WswwzYTAB1lijbM2Wuh7KF/UwsA02OyT4glwVYkMjEYQybpeQQ31sA
 vNiOLiy0epAw/8FBvg2nVl8n5EdFCiLlczqFhcabBEvO/RAqg4w9ipUBlR6OMo0+
 JQTwuvLLjyimHkQdUcmO
 =QB98
 -----END PGP SIGNATURE-----

Merge tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "The big chunks here are the updates for oxygen driver for Xonar DG
  devices, which were slipped from the previous pull request.  They are
  device-specific and thus not too dangerous.

  Other than that, all patches are small bug fixes, mainly for Samsung
  build fixes, a few HD-audio enhancements, and other misc ASoC fixes.
  (And this time ASoC merge is less than Octopus, lucky seven :)"

* tag 'sound-fix-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (42 commits)
  ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled
  ALSA: hda - add headset mic detect quirks for another Dell laptop
  ALSA: oxygen: Xonar DG(X): cleanup and minor changes
  ALSA: oxygen: Xonar DG(X): modify high-pass filter control
  ALSA: oxygen: Xonar DG(X): modify input select functions
  ALSA: oxygen: Xonar DG(X): modify capture volume functions
  ALSA: oxygen: Xonar DG(X): use headphone volume control
  ALSA: oxygen: Xonar DG(X): modify playback output select
  ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2
  ALSA: oxygen: Xonar DG(X): move the mixer code into another file
  ALSA: oxygen: modify CS4245 register dumping function
  ALSA: oxygen: modify adjust_dg_dac_routing function
  ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters function
  ALSA: oxygen: Xonar DG(X): modify initialization functions
  ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functions
  ALSA: oxygen: additional definitions for the Xonar DG/DGX card
  ALSA: oxygen: change description of the xonar_dg.c file
  ALSA: oxygen: export oxygen_update_dac_routing symbol
  ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING register
  ALSA: oxygen: modify the SPI writing function
  ...
2014-01-31 15:38:09 -08:00
Stephen Warren 75fae117a5 ALSA: hda/hdmi - allow PIN_OUT to be dynamically enabled
Commit 384a48d715 "ALSA: hda: HDMI: Support codecs with fewer cvts
than pins" dynamically enabled each pin widget's PIN_OUT only when the
pin was actively in use. This was required on certain NVIDIA CODECs for
correct operation. Specifically, if multiple pin widgets each had their
mux input select the same audio converter widget and each pin widget had
PIN_OUT enabled, then only one of the pin widgets would actually receive
the audio, and often not the one the user wanted!

However, this apparently broke some Intel systems, and commit
6169b67361 "ALSA: hda - Always turn on pins for HDMI/DP" reverted the
dynamic setting of PIN_OUT. This in turn broke the afore-mentioned NVIDIA
CODECs.

This change supports either dynamic or static handling of PIN_OUT,
selected by a flag set up during CODEC initialization. This flag is
enabled for all recent NVIDIA GPUs.

Reported-by: Uosis <uosisl@gmail.com>
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-31 17:57:02 +01:00
Hui Wang 5e87d58071 ALSA: hda - add headset mic detect quirks for another Dell laptop
When we plug a 3-ring headset on the Dell machine (Vendor ID:
0x10ec0255, Subsystem ID: 0x1028064d), the headset mic can't be
detected, after apply this patch, the headset mic can work well.

BugLink: https://bugs.launchpad.net/bugs/1260303
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Doro Wu <fan-cheng.wu@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-30 12:21:30 +01:00
Takashi Iwai 77d531bfda Merge branch 'xonar-dg' of git://git.alsa-project.org/alsa-kprivate into for-next
This completes the hardware support for the Asus Xonar DG/DGX cards,
and makes them actually usable.

This is v4 of Roman's patch set with some small formatting changes.
2014-01-30 12:12:27 +01:00
Linus Torvalds ca2a650f3d Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dma updates from Vinod Koul:
 - new driver for BCM2835 used in R-pi
 - new driver for MOXA ART
 - dma_get_any_slave_channel API for DT based systems
 - minor fixes and updates spread acrooss driver

[ The fsl-ssi dual fifo mode support addition clashed badly with the
  other changes to fsl-ssi that came in through the sound merge.  I did
  a very rough cut at fixing up the conflict, but Nicolin Chen (author
  of both sides) will need to verify and check things ]

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: mmp_pdma: fix mismerge
  dma: pl08x: Export pl08x_filter_id
  acpi-dma: align documentation with kernel-doc format
  dma: fix vchan_cookie_complete() debug print
  DMA: dmatest: extend the "device" module parameter to 32 characters
  drivers/dma: fix error return code
  dma: omap: Set debug level to debugging messages
  dmaengine: fix kernel-doc style typos for few comments
  dma: tegra: add support for Tegra148/124
  dma: dw: use %pad instead of casting dma_addr_t
  dma: dw: join split up messages
  dma: dw: fix style of multiline comment
  dmaengine: k3dma: fix sparse warnings
  dma: pl330: Use dma_get_slave_channel() in the of xlate callback
  dma: pl330: Differentiate between submitted and issued descriptors
  dmaengine: sirf: Add device_slave_caps interface
  DMA: Freescale: change BWC from 256 bytes to 1024 bytes
  dmaengine: Add MOXA ART DMA engine driver
  dmaengine: Add DMA_PRIVATE to BCM2835 driver
  dma: imx-sdma: Assign a default script number for ROM firmware cases
  ...
2014-01-29 20:27:23 -08:00
Roman Volkov 3f49a66f6c ALSA: oxygen: Xonar DG(X): cleanup and minor changes
Remove old SPI control functions, change anti-pop init
sequence, remove some garbage from structures. The 'Apply' functions
must be called at the mixer initialization, otherwise
mixer settings sometimes will not be applied at startup.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:53 +01:00
Roman Volkov fc114e9fba ALSA: oxygen: Xonar DG(X): modify high-pass filter control
Change the 'put' function of the high-pass filter control to use the new
SPI functions.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:52 +01:00
Roman Volkov 70e0d82d5e ALSA: oxygen: Xonar DG(X): modify input select functions
First of all, we should not touch the GPIOs. They are not
for selecting the capture source, but they seems just enable
the whole audio input curcuit. The 'put' function calls the
'apply' functions to change register values. Change the order
of capture sources.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:51 +01:00
Roman Volkov cf218b2ef3 ALSA: oxygen: Xonar DG(X): modify capture volume functions
Modify the input_vol_* functions to use the new SPI routines,
There is a new applying function that will be called when
the capture source changed.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:51 +01:00
Roman Volkov c754639a29 ALSA: oxygen: Xonar DG(X): use headphone volume control
I tried both variants: volume control and impedance selector.
In the first case one minus is that we can't change the
volume of multichannel output without additional software
volume control. However, I am using this variant for the
last three months and this seems good. All multichannel
speaker systems have internal amplifier with the
volume control included, but not all headphones have
this regulator. In the second case, my software volume
control does not save the value after reboot.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:50 +01:00
Roman Volkov 2809cb84d1 ALSA: oxygen: Xonar DG(X): modify playback output select
Change the order of elements in the output select control. This will
reduce the number of relay switches. Change 'put' function to call the
oxygen_update_dac_routing() function. Otherwise multichannel playback
does not work. Also there is a new function to apply settings, this
prevents from duplicating the code.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:50 +01:00
Roman Volkov 3dd77654fb ALSA: oxygen: Xonar DG(X): capture from I2S channel 1, not 2
Actually CS4245 connected to the I2S channel 1 for
capture, not channel 2. Otherwise capturing and
playback does not work for CS4245.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:49 +01:00
Roman Volkov 041f26b625 ALSA: oxygen: Xonar DG(X): move the mixer code into another file
Moving the mixer code away makes things easier. The mixer
will control the driver, so the functions of the
driver need to be non-static.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:49 +01:00
Roman Volkov 06f70d0da0 ALSA: oxygen: modify CS4245 register dumping function
Change the function to read the data from the new shadow buffer.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:48 +01:00
Roman Volkov 1f91ecc14d ALSA: oxygen: modify adjust_dg_dac_routing function
When selecting the audio output destinations (headphones,
FP headphones, multichannel output), the channel routing
should be changed depending on what destination selected.
Also unnecessary I2S channels are digitally muted. This
function called when the user selects the destination
in the ALSA mixer.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:48 +01:00
Roman Volkov fddc106bc3 ALSA: oxygen: Xonar DG(X): modify DAC/ADC parameters function
When selecting the audio sample rate for CS4245,
the MCLK divider should also be changed.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:47 +01:00
Roman Volkov 3c1611ddd1 ALSA: oxygen: Xonar DG(X): modify initialization functions
Change CS4245 initialization: different sequence and GPIO values,
according to datasheets and reverse-engineering information.
Change cleanup/resume/suspend functions, since they use
initialization.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:47 +01:00
Roman Volkov bed61935cc ALSA: oxygen: Xonar DG(X): add new CS4245 SPI functions
Add the new SPI write and read functions. The SPI read function
is used for creating initial registers dump and may be used for
debugging purposes. SPI operations are cached, so there is a new
function to manage the cache (shadow). I have to remove
the shift from the CS4245_SPI_* constants, since when
we are performing the reading, we need to shift by 8 instead
of 16.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:46 +01:00
Roman Volkov ddd624c332 ALSA: oxygen: additional definitions for the Xonar DG/DGX card
Add additional constants to the xonar_dg.h file:
capture and playback sources. Move GPIO_* constants and the
dg struct to the header file from the xonar_dg.c file.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:46 +01:00
Roman Volkov c4d4390c58 ALSA: oxygen: change description of the xonar_dg.c file
Add some additional information in comments and my copyright.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:45 +01:00
Roman Volkov e9c2f10b43 ALSA: oxygen: export oxygen_update_dac_routing symbol
When the user switches the output from stereo to multichannel
or vice versa, the driver needs to update the channel routing.
Instead of creating additional subroutines, I better export existing
oxygen_update_dac_routing symbol from the oxygen mixer
and call this function. It calls model.adjust_dac_routing()
and my function does the work.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:45 +01:00
Roman Volkov 079e0cb776 ALSA: oxygen: add mute mask for the OXYGEN_PLAY_ROUTING register
The Xonar DG/DGX driver needs this mask to mute unnecessary
channels.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:44 +01:00
Roman Volkov 303cff30d3 ALSA: oxygen: modify the SPI writing function
Modify the oxygen_write_spi() function to use the newly
introduced oxygen_wait_spi() function. Change return value
from void to int, so it can return error codes. Older
drivers just ignore that return value, new drivers can
check this value. We need to wait AFTER
initiating the SPI transaction, otherwise read
operation will not work.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:44 +01:00
Roman Volkov 10dd44dc88 ALSA: oxygen: add the separate SPI waiting function
The oxygen_wait_spi() function now performs waiting when the
SPI bus completes a transaction. Introduce the timeout error
checking and increase timeout to 200 from 40.

Signed-off-by: Roman Volkov <v1ron@mail.ru>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2014-01-29 20:45:43 +01:00
David Henningsson cd262518a3 ALSA: hda - Add parameter for dumping processing coefficients
Processing coefficients are often a vital part of the codec's configuration,
so dumping them can be important. However, because they are undocumented and
secret, we do not want to enable this for all codecs by default.

Therefore instead add this as a debugging parameter.

I have prepared for codecs that want to enable this by default by the extra
dump_coef bitfield, but unsure if we want to do that as long as the
(unlikely, but still) race remains.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-29 16:39:13 +01:00
Takashi Iwai a31886669f ASoC: Fixes for v3.14
A few fixes, all in drivers.  Nothing stands out particularly, the
 biggest set of fixes is some build coverage issues from Sachin.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS5+nmAAoJELSic+t+oim9aMEQAIdCxUw2kZBkvJx+P2Zoncid
 u56PW1BeYd5NnRfU/XsVNI6F2RGRwzTY5yFKHZ5fc1E0PObRJ4USWPcbR9V8eVQj
 6NDP/b01iKbTJvjWVJYyIsn/690PnwPCcb9Zu8SPtry+BcMRpM53Mfkg5T+zHkNm
 e4dTPFmy8O1m+RI2XT6Zi4YoxkF8HwsFtPbQhu5ASsL5WpdD1q4w+oL861/e0Kpo
 2j3kBWkPjj8msDFeTbA7nXPWQrOx5TF9x5Z0stOnqt0G9rOOvtbnH1cd3xyMqK7+
 eM8kMstmhChW/mrxPYJwh6NMFWaBnAtqZ6eHZNCDXJhdQ3tZtPCcqaHLgFONPKyu
 /OkxvlzN5P1OyLvSofaWO1nWf+D833pMGCknSNxuS7WXfVHYCJ7WPIKqNbDT4r0C
 E0czsKcTFq7D24F8TNm6YTIakhbA3hpETCZRXAkIuEII2vmgORzomx6y65JPQc2M
 Igya0bgzU5pV8lx/02UtrzaXvYwb89/DdMmp4gM5CGdepiRWMSx+j/Ao40vlEGHC
 ZNm7P6MsG2D1h/GgyEV6yH3PnSxZgY5Vxm/9CNDfJss155B5wowKR70RI5nk3NIS
 d/tuRpuiMWeC+wLemBAW5wudYaeLPVZIQ+NLjty/8agFn843ePKpCNnhyaPmhekx
 l7yUEfUoA1yDQiDJysVD
 =ayMS
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.14

A few fixes, all in drivers.  Nothing stands out particularly, the
biggest set of fixes is some build coverage issues from Sachin.
2014-01-29 07:35:19 +01:00
Mark Brown e65523ca79 Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fsl', 'asoc/fix/omap', 'asoc/fix/samsung', 'asoc/fix/simple', 'asoc/fix/tlv320aic32x4' and 'asoc/fix/wm5100' into asoc-linus 2014-01-27 18:18:36 +00:00
Markus Pargmann 609e6025b8 ASoC: tlv320aic32x4: Fix MICPGA input configuration
Currently the Negative Terminal Input Routing Configuration is only set
when there is a special routing configuration. If we don't use one of
the inputs IN1 or IN2 as negative terminal input, the PGA and recording
does not work.

This patch adds a route from CM1L/CM1R to the PGA as negative input by
default. With this configuration the PGA can amplify all input signals
and line-in/mic works again.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-27 18:13:44 +00:00
Markus Pargmann b44aa40f87 ASoC: tlv320aic32x4: Fix mono playback
Playback of a mono stream should output the same stream on both
channels. At the moment only the left analog signal is valid, the right
one is just noise.

This patch maps the left digital channel onto both DACs when receiving a
mono stream.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-27 18:13:40 +00:00
Adrien Vergé e7729a4153 ALSA: hda - Fix silent output on MacBook Air 1,1
Similarly to other Apple products, MBA 1,1 needs a specific quirk.
Pin 0x18 must be set to VREF_50 to have sound output.  This was no
longer done since commit 1a97b7f, resulting in a mute built-in speaker.

This patch corrects the regression by creating a fixup for the MBA 1,1.

Fixes: 1a97b7f227 ("ALSA: hda/realtek - Remove the last static quirks for ALC882")
Cc: <stable@vger.kernel.org> [v3.4+]
Tested-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-25 09:17:34 +01:00
Sachin Kamat 4c021cc5a4 ASoC: samsung: Remove dma.h inclusion
mach/dma.h is not referenced by this file. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-24 13:18:06 +00:00
Sachin Kamat 57e33781ce ASoC: samsung: Add NULL check in i2s.c
'res' could be NULL from one of the operations above (line 1243). Thus
check 'res' for NULL before releasing the region to avoid null pointer
dereference.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-24 13:18:03 +00:00
Sachin Kamat 9b35a7b65f ASoC: Samsung: Fix build error due to missing dependency
Depend on MFD_ARIZONA to avoid the following build errors:

sound/soc/codecs/arizona.c:218: undefined reference to `arizona_request_irq'
sound/soc/codecs/arizona.c:226: undefined reference to `arizona_request_irq'
sound/soc/codecs/arizona.c:1719: undefined reference to `arizona_request_irq'

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-24 13:16:53 +00:00
Linus Torvalds f2c73464d7 ARM: SoC cleanups for 3.14
This is the branch where we usually queue up cleanup efforts, moving
 drivers out of the architecture directory, header file restructuring,
 etc. Sometimes they tangle with new development so it's hard to keep it
 strictly to cleanups.
 
 Some of the things included in this branch are:
 
 * Atmel SAMA5 conversion to common clock
 * Reset framework conversion for tegra platforms
  - Some of this depends on tegra clock driver reworks that are shared with Mike
    Turquette's clk tree.
 * Tegra DMA refactoring, which are shared branches with the DMA tree.
 * Removal of some header files on exynos to prepare for multiplatform
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4Vf7AAoJEIwa5zzehBx3f9UP/jwMlbfbSZHfNQ/QG0SqZ9RD
 zvddyDMHY/qXnzgF3Dax+JR9BDDVy8AlQe713FCoiHJZggWRAbbavkx8gxITDrZQ
 6NYaEkkuVxqyM8APl3PwMqYm8UZ8MUf4lCltlOA4jkesY9vue91AFnfyKh2CvHrn
 Leg4XT6mFzf/vYDL6RbvTz/Qr253uv3KvYBxkeiRNa0Y7OXRemEXSOfgxh0YGxUl
 LZ2IWQFOh/DH4kaeQI8V4G67X3ceHiFyhCnl0CPwfxaZaNBVaxvIFgIUTdetS6Sb
 zcXa029tE/Dfsr55vZAv9LUHEipCSOeE5rn2EJWehTWyM7vJ42Eozqgh+zfCjXS7
 Ib6g2npsvIluQit/RdITu44h5yZlrQsLgKTGJ8jjXqbT4HQ/746W8b/TP0YLtbw7
 N8oqr7k4vsZyF0dAYZQtfQUZeGISz67UbFcdzl9tmYOR7HFuAYkAQYst77zkVJf8
 om59BAYYTG5FNjQ4I9AKUfJzxXYveI6AKpXSCCZiahpFM2D1CJIzp9Wi0GwK1HRR
 sFVWhS0dajvz63pVVC2tw5Sq4J7onRRNGIXFPoE5fkmlelm0/q0zzGjw3Z0nTqbZ
 8zxuwuy2FfPJK11GbUAIhAgn1sCLYyAhl6IE+FsanGeMOSGIMrH0v5/HphAxoCXt
 BvqMDogyLoGPce1Gm3pJ
 =3CcT
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
  ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
  ...
2014-01-23 18:36:55 -08:00
Sachin Kamat 4a9eee01b8 ASoC: samsung: Fix Kconfig dependency
Select S3C24XX_DMA instead of S3C2410_DMA to avoid following dependency issues
and build errors:

warning: (CPU_S3C2410 && CPU_S3C2442 && SND_SOC_SAMSUNG && SND_S3C24XX_I2S && SND_S3C2412_SOC_I2S && SND_SOC_SAMSUNG_SMDK2443_WM9710 && SND_SOC_SAMSUNG_LN2440SBC_ALC650) selects S3C2410_DMA which has unmet direct dependencies (ARCH_S3C24XX && S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442))
warning: (CPU_S3C2410 && CPU_S3C2442 && SND_SOC_SAMSUNG && SND_S3C24XX_I2S && SND_S3C2412_SOC_I2S && SND_SOC_SAMSUNG_SMDK2443_WM9710 && SND_SOC_SAMSUNG_LN2440SBC_ALC650) selects S3C2410_DMA which has unmet direct dependencies (ARCH_S3C24XX && S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442))

arch/arm/mach-s3c24xx/built-in.o: In function `s3c2410_dma_add':
arch/arm/mach-s3c24xx/dma-s3c2410.c:134: undefined reference to `s3c2410_dma_init'
arch/arm/mach-s3c24xx/dma-s3c2410.c:135: undefined reference to `s3c24xx_dma_order_set'
arch/arm/mach-s3c24xx/dma-s3c2410.c:136: undefined reference to `s3c24xx_dma_init_map'
arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops'
sound/soc/samsung/s3c24xx-i2s.c:293: undefined reference to `s3c2410_dma_ctrl'
arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops'
arch/arm/plat-samsung/include/plat/dma-ops.h:60: undefined reference to `s3c_dma_get_ops'
sound/built-in.o: In function `s3c2412_i2s_trigger':
sound/soc/samsung/s3c-i2s-v2.c:432: undefined reference to `s3c2410_dma_ctrl'

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 12:23:02 +00:00
Sachin Kamat 0cf0f17440 ASoC: wm5100: Export wm5100_detect
Export the symbol so that it is accessible to modules. Fixes the
following error:

ERROR: "wm5100_detect" [sound/soc/samsung/snd-soc-lowland.ko] undefined!

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 12:22:11 +00:00
Takashi Iwai deb6596f16 ALSA: Refactor slot assignment code
There are two loops that are almost identical but only with different
checks.  Refactor them with a simple helper, and give a bit more
comments what's doing there.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-23 11:45:24 +01:00
Dan Carpenter 4c3773eda4 ALSA: bits vs bytes bug in snd_card_create()
The test here is intended intended to prevent shift wrapping bugs when
we do "1U << idx2".  We should consider the number of bits in a u32
instead of the number of bytes.

[fix another chunk similarly by tiwai]

Fixes: 7bb2491b35 ('ALSA: Add kconfig to specify the max card numbers')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-23 10:50:36 +01:00
Sachin Kamat f83183ca3c ASoC: samsung: smdk_wm8994: Fix build error
Fixes the following build error and warning when OF is not defined:
sound/soc/samsung/smdk_wm8994.c:191:23: error: ‘samsung_wm8994_of_match’ undeclared (first use in this function)
sound/soc/samsung/smdk_wm8994.c:47:32: warning: ‘smdk_board_data’ defined but not used [-Wunused-variable]

of_match_ptr() is used so that samsung_wm8994_of_match gets dropped (as unused)
by the compiler when OF is not defined.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-22 17:13:45 +00:00
Sachin Kamat 9eeb95727c ASoC: Samsung: s3c-i2s-v2: Fix build error
Fixes the following error introduced by commit eca3b01d08
("ASoC: switch over to use snd_soc_register_component() on s3c i2s"):
sound/soc/samsung/s3c-i2s-v2.c:732:32: error: ‘drv’ undeclared (first use in this function)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-22 17:13:45 +00:00
Sachin Kamat abffae647e ASoC: samsung: Fix build regressions due to gpio re-org
Recent changes through commits c67d0f2926 ("ARM: s3c24xx: get rid
of custom <mach/gpio.h>"), b0161caa72 ("ARM: S3C[24|64]xx: move includes
back under <mach/> scope"), 364374121b ("ARM: s3c24xx: explicit
dependency on <plat/gpio-cfg.h>") and 41c3548e6d ("ARM: s3c64xx: get rid
of custom <mach/gpio.h>") caused build regressions due to broken
dependencies. Fix the following errors by including the necessary header
files explicitly:

sound/soc/samsung/h1940_uda1380.c:56:3: error: implicit declaration of function ‘S3C2410_GPG’
sound/soc/samsung/h1940_uda1380.c:149:18: error: ‘S3C_GPIO_END’ undeclared (first use in this function)
sound/soc/samsung/h1940_uda1380.c:234:21: error: ‘S3C_GPIO_END’ undeclared (first use in this function)
sound/soc/samsung/h1940_uda1380.c:270:12: error: ‘S3C_GPIO_END’ undeclared (first use in this function)
sound/soc/samsung/neo1973_wm8753.c:239:2: error: implicit declaration of function ‘S3C2410_GPJ’
sound/soc/samsung/rx1950_uda1380.c:67:3: error: implicit declaration of function ‘S3C2410_GPG’
sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘s3c_gpio_cfgall_range’
sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘S3C2410_GPE’
sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘S3C_GPIO_SFN’
sound/soc/samsung/s3c2412-i2s.c:87:10: error: ‘S3C_GPIO_PULL_NONE’ undeclared
sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘s3c_gpio_cfgall_range’
sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘S3C2410_GPE’
sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘S3C_GPIO_SFN’
sound/soc/samsung/s3c24xx-i2s.c:395:10: error: ‘S3C_GPIO_PULL_NONE’ undeclared
sound/soc/samsung/smartq_wm8987.c:112:3: error: implicit declaration of function ‘S3C64XX_GPL’

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-22 17:13:45 +00:00
Takashi Iwai 2387083157 ALSA: hda - Apply +5dB output amp on ASUS Zenbook UX31A
ASUS Zenbook UX31A has yet another problem -- softer output level than
others.  According to the measurement, the peak output difference
between 31A and 31E is 5dB.  As ALC269VB has a COEF for the class-D
pre-amp, let's apply it for +5dB.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-22 08:32:02 +01:00
Takashi Iwai b75b1518a5 ALSA: cs46xx: Fix memory leak at destructor
The release of module object itself was forgotten.
Spotted by COVERIY CID 1162828.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-22 07:44:27 +01:00
Linus Torvalds ac26663572 MFD changes due for the v3.14 merge window
New drivers
  - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger
  - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator
 
 Existing driver adaptions
  - Expansion of Wolfson Arizona DSP and High-Pass filter controls
  - TI TWL6040 default Regmap support and Regcache addition/bypass
  - Some nice Smatch catch fixes
  - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
  - ChromeOS EC timing (delay) adaptions and added dependency on OF
  - Many constifications of 'struct {mfd_cell,regmap_irq,et. al}'
  - Watchdog support added for NVIDIA AS3722
  - Convert functions to static in TI AM335x
  - Realigned previously defeated functionality in TI AM335x
  - IIO ADC-TSC concurrency dead-lock/timeout resolution
  - Addition of Power Management and Clock support for Samsung core
  - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
  - Greater use of irqdomain functionality in ST-E AB8500
  - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
  - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
  - Device Tree documentation added for TI/Nat Semi LP3943
  - Version detection and voltage tables for TI TPS6586x PMIC devices
  - Simplification of Freescale MC13XXX (de-)initialisation routines
  - Clean-up and simplification of the Realtek parent driver
  - Added support for RTL8402 Realtek PCI-Express card reader
  - Resource leak fix for Maxim 77686
  - Possible suspend BUG() fix in OMAP USB TLL
  - Support for new Wolfson WM5110 Revision (D)
  - Testing of automatic assignment of of_node in mfd_add_device()
    - Reversion of the above when it started to cause issues
  - Remove legacy Platform Data from;
               TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
  - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal,
               unused uninitialised warning mitigation, error message clarity,
               removal of redundant/duplicate checks, licensing (GPL -> GPL2),
               coding consistency, duplicate function declaration, ret checks,
               commit corrections, redundant of_match_ptr() helper removal,
               spelling, #if-deffery removal and header guards name changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIbBAABAgAGBQJS3pLGAAoJEFGvii+H/HdhmkkP93Hrd9FBjVpmUQcOrghFDd//
 vte2LVDovXDcwm7i+BdZNG3+2aWtliTQXIw8PaAziUTwMlDNtT2B6GBFnIff4aXB
 Em/Oh6Je7r1gom1gMPCuefRrInTk0xEXy9Oazp4Hn4in71T+8PHNlEHdxEojakEm
 H5FnjAfgISEsA5twSyO9efVLNqPd3UQqg3O571oKwfuSED70YSCW2Yyaoiz4pnE5
 0WwZ9cel+sP7CIuyuR4TumUSDeBIAnYnZWqjqXZ1ueMWcm2RNVqeFrt/w0uoZjOA
 yBg8ZMfkBcePd6qnifqVqagRW/jW1bxmUeIHkp0bWeMqWN6Yyypitz8ZW+Qi7Swa
 OcmgM9V7OW1WG9FF7HoLbYHIPzmBb6duGtcCfAir4m8HJjyPfTuJpOshBW1F3+VG
 yEf5a1fj2NO34kvIbLec2f7MveIMmZxzWaoOx+ET9/WPknilifgyp7eDH24pQwI4
 5Lo5Z5uAfBCT3roOzHxCLl2nVXQoC66iTwdnneiEOn4rB/ApjfGVvGGd0VT6TD+g
 z3RqxpTdkd0AtjfeF778uTDBEKu7HZkqmlBP8HKWCBEAzqcKg7BpjYw0ajgmVwKr
 QiuBuWcEZ/2vVt8Qot7y5Vx89Q4AQwOqc24SldtQLu46iPAuKt+GizzHRw3IxBiQ
 VU9Aq/VoaTHBLS91tDE=
 =PuTE
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...
2014-01-21 10:58:17 -08:00