Граф коммитов

60 Коммитов

Автор SHA1 Сообщение Дата
Stephen Boyd 7fa50aa559 Merge branches 'clk-hisi-usb', 'clk-silent-bulk', 'clk-mtk-hdmi', 'clk-mtk-mali' and 'clk-imx6ul-ccosr' into clk-next
* clk-hisi-usb:
  clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC

* clk-silent-bulk:
  clk: bulk: silently error out on EPROBE_DEFER

* clk-mtk-hdmi:
  clk: mediatek: correct the clocks for MT2701 HDMI PHY module

* clk-mtk-mali:
  clk: mediatek: add g3dsys support for MT2701 and MT7623
  dt-bindings: reset: mediatek: add entry for Mali-450 node to refer
  dt-bindings: clock: mediatek: add entry for Mali-450 node to refer
  dt-bindings: clock: mediatek: add g3dsys bindings

* clk-imx6ul-ccosr:
  clk: imx: Add new clo01 and clo2 controlled by CCOSR
2018-06-04 12:27:40 -07:00
Sean Wang a11ca68969 clk: mediatek: add g3dsys support for MT2701 and MT7623
Add clock driver support for g3dsys on MT2701 and MT7623, which is
providing essential clock gate and reset controller to Mali-450.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15 15:21:36 -07:00
Ryder Lee bf61099a21 clk: mediatek: correct the clocks for MT2701 HDMI PHY module
The hdmitx_dig_cts clock signal is not a child of clk26m,
and the actual output of the PLL block is derived from
the tvdpll via a configurable PLL post-divider.

It is used as the PLL reference input to the HDMI PHY module.

Fixes: e986211827 ("clk: mediatek: Add MT2701 clock support")
Signed-off-by: Chunhui Dai <chunhui.dai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-15 15:17:49 -07:00
Stephen Boyd b03781920c Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and 'clk-renesas' into clk-next
* clk-mediatek:
  clk: mediatek: add audsys support for MT2701
  clk: mediatek: add devm_of_platform_populate() for MT7622 audsys
  dt-bindings: clock: mediatek: add audsys support for MT2701
  dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device
  clk: mediatek: update missing clock data for MT7622 audsys
  clk: mediatek: fix PWM clock source by adding a fixed-factor clock
  dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4

* clk-hisi:
  clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc()
  clk: hisilicon: mark wdt_mux_p[] as const
  clk: hisilicon: Mark phase_ops static
  clk: hi3798cv200: add emmc sample and drive clock
  clk: hisilicon: add hisi phase clock support
  clk: hi3798cv200: add COMBPHY0 clock support
  clk: hi3798cv200: fix define indentation
  clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK
  clk: hi3798cv200: correct IR clock parent
  clk: hi3798cv200: fix unregister call sequence in error path

* clk-allwinner:
  clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU
  clk: sunxi-ng: add support for the Allwinner H6 CCU
  dt-bindings: add device tree binding for Allwinner H6 main CCU
  clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks
  clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO
  clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate
  clk: sunxi-ng: h3: h5: Add minimal rate for video PLL
  clk: sunxi-ng: Add check for minimal rate to NM PLLs
  clk: sunxi-ng: Use u64 for calculation of nkmp rate
  clk: sunxi-ng: Mask nkmp factors when setting register
  clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name

* clk-ux500:
  clk: ux500: Drop AB8540/9540 support

* clk-renesas: (27 commits)
  clk: renesas: cpg-mssr: Adjust r8a77980 ifdef
  clk: renesas: rcar-gen3: Always use readl()/writel()
  clk: renesas: sh73a0: Always use readl()/writel()
  clk: renesas: rza1: Always use readl()/writel()
  clk: renesas: rcar-gen2: Always use readl()/writel()
  clk: renesas: r8a7740: Always use readl()/writel()
  clk: renesas: r8a73a4: Always use readl()/writel()
  clk: renesas: mstp: Always use readl()/writel()
  clk: renesas: div6: Always use readl()/writel()
  clk: fix false-positive Wmaybe-uninitialized warning
  clk: renesas: r8a77965: Replace DU2 clock
  clk: renesas: cpg-mssr: Add support for R-Car M3-N
  clk: renesas: cpg-mssr: add R8A77980 support
  dt-bindings: clock: add R8A77980 CPG core clock definitions
  clk: renesas: r8a7792: Add rwdt clock
  clk: renesas: r8a7794: Add rwdt clock
  clk: renesas: r8a7791/r8a7793: Add rwdt clock
  clk: renesas: r8a7790: Add rwdt clock
  clk: renesas: r8a7745: Add rwdt clock
  clk: renesas: r8a7743: Add rwdt clock
  ...
2018-04-06 13:21:57 -07:00
Ryder Lee b572f6393e clk: mediatek: add audsys support for MT2701
Add clock driver support for MT2701 audsys.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20 00:24:42 -07:00
Ryder Lee 037b21133e clk: mediatek: add devm_of_platform_populate() for MT7622 audsys
Add devm_of_platform_populate() to populate devices which are children
of the root node.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-20 00:24:33 -07:00
Weiyi Lu f72595cf44 clk: mediatek: update clock driver of MT2712
According to ECO design change,
1. add new clock mux data and change some
2. add new clock gate data and clock factor data
3. change status register offset of infra subsystem

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 14:37:40 -07:00
Ryder Lee 936ceb12c5 clk: mediatek: update missing clock data for MT7622 audsys
Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:40:57 -07:00
Sean Wang 89cd7aec21 clk: mediatek: fix PWM clock source by adding a fixed-factor clock
The clock for which all PWM devices on MT7623 or MT2701 actually depending
on has to be divided by four from its parent clock axi_sel in the clock
path prior to PWM devices.

Consequently, adding a fixed-factor clock axisel_d4 as one-fourth of
clock axi_sel allows that PWM devices can have the correct resolution
calculation.

Cc: stable@vger.kernel.org
Fixes: e986211827 ("clk: mediatek: Add MT2701 clock support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 13:25:30 -07:00
Sean Wang bc27360b3c clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
Changes from v1->v2:
Add 'select RESET_CONTROLLER' under COMMON_CLK_MEDIATEK and enable
reset.c to be built when COMMON_CLK_MEDIATEK is selected. That should
be quite reasonable because the reset controller is tightly embedded
inside and exported from these clock subsystems. At least it can be found
on infracfg and pericfg subsystem that both are really fundamental block
lots of devices must depend on.

commit 74cb0d6dde ("clk: mediatek: fixup test-building of MediaTek clock
drivers") can let the build system looking into the directory where the
clock drivers resides and then allow test-building the drivers.

But the change also gives rise to certain incorrect behavior which is
reset.c being built even not depending on either COMPILE_TEST or
ARCH_MEDIATEK alternative dependency. To get rid of reset.c being built
unexpectedly on the other platforms, it would be a good change that the
file should be built depending on its own specific configuration rather
than just on generic RESET_CONTROLLER one.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-10 13:41:15 -08:00
Sean Wang 5589818b2f clk: mediatek: Fix all warnings for missing struct clk_onecell_data
Even though the header file linux/clk-provider.h is already being properly
included in clk-mtk.h, the definition of struct clk_onecell_data still
must depend on CONFIG_COMMON_CLK defined and thus it's possible that
below build warnings occur when CONFIG_COMMON_CLK is not being selected.

Therefore, these functions which need struct clk_onecell_data without
declaring that structure first requires simply declaring that this struct
exists prior to referencing it in clk-mtk.h

Changes from v1->v2:
enhance v1 based on two useful solutions Jean Delvare kindly suggested.

All warnings (new ones prefixed by >>):

In file included from drivers/clk/mediatek/reset.c:22:0:
>>drivers/clk/mediatek/clk-mtk.h:44:19: warning: 'struct clk_onecell_data'
declared inside parameter list will not be visible outside of
this definition or declaration
  int num, struct clk_onecell_data *clk_data);
		  ^~~~~~~~~~~~~~~~
drivers/clk/mediatek/clk-mtk.h:63:19: warning: 'struct clk_onecell_data'
declared inside parameter list will not be visible outside of
this definition or declaration
  int num, struct clk_onecell_data *clk_data);
		  ^~~~~~~~~~~~~~~~
drivers/clk/mediatek/clk-mtk.h:145:10: warning: 'struct clk_onecell_data'
declared inside parameter list will not be visible outside of
this definition or declaration
  struct clk_onecell_data *clk_data);
	 ^~~~~~~~~~~~~~~~
drivers/clk/mediatek/clk-mtk.h:164:11: warning: 'struct clk_onecell_data'
declared inside parameter list will not be visible outside of
this definition or declaration
   struct clk_onecell_data *clk_data);
	  ^~~~~~~~~~~~~~~~
drivers/clk/mediatek/clk-mtk.h:190:12: warning: 'struct clk_onecell_data'
declared inside parameter list will not be visible outside of this
definition or declaration
    struct clk_onecell_data *clk_data);
	   ^~~~~~~~~~~~~~~~

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: kbuild-all@01.org
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-26 17:15:36 -08:00
Sean Wang 16a1ac19a0 clk: mediatek: group drivers under indpendent menu
Getting much MediaTek clock driver have been added to CCF, so it's
better adding the cleanup for grouping drivers under the independent
menu to simplify configuration selection. In addition, really trivial
fixups for typos are added in the same patch.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-21 16:43:35 -08:00
Linus Torvalds fc35c1966e We have two changes to the core framework this time around. The first being a
large change that introduces runtime PM support to the clk framework. Now we
 properly call runtime PM operations on the device providing a clk when the clk
 is in use. This helps on SoCs where the clks provided by a device need
 something to be powered on before using the clks, like power domains or
 regulators. It also helps power those things down when clks aren't in use. The
 other core change is a devm API addition for clk providers so we can get rid of
 a bunch of clk driver remove functions that are just doing
 of_clk_del_provider().
 
 Outside of the core, we have the usual addition of clk drivers and smattering
 of non-critical fixes to existing drivers. The biggest diff is support for
 Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch
 of data.
 
 By the way, we're trying something new here where we build the tree up with
 topic branches. We plan to work this into our workflow so that we don't step
 on each other's toes, and so the fixes branch can be merged on an as-needed
 basis.
 
 Core:
  - Runtime PM support for clk providers
  - devm API for of_clk_add_hw_provider()
 
 New Drivers:
  - Mediatek MT2712 and MT7622
  - Renesas R-Car V3M SoC
 
 Updates:
  - Runtime PM support for Samsung exynos5433/exynos4412 providers
  - Removal of clkdev aliases on Samsung SoCs
  - Convert clk-gpio to use gpio descriptors
  - Various driver cleanups to match kernel coding style
  - Amlogic Video Processing Unit VPU and VAPB clks
  - Sigma-delta modulation for Allwinner audio PLLs
  - Allwinner A83t Display clks
  - Support for the second display unit clock on Renesas RZ/G1E
  - Suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
  - New clock ids for Rockchip rk3188 and rk3368 SoCs
  - Various 'const' markings on clk_ops structures
  - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJaD3qRAAoJEK0CiJfG5JUlOLgQAKWekgG/IYgcPzPWDYfg8Hwr
 sVVUK7+q7TVfbHsbYVikJuUaxutKZ0onnrYmOalTTyyxqL2E1/rYScnxdYHfcwX8
 cyfHebRHsbh/Xg45ktwjzBkO49nwuppkpXd/V80GSBUZ+lsIVl5DUrrFAZdRUEdr
 CEsAsF9tEWIl+0gqXYNuiKBV7QAYv5BUPrbJQf0PwL6jX0OAhLv+ukfN8BdmYsOb
 rdoqhdgmyHkTuIMqsC/H2yP59aAKBse7wxIYebDiTdbPWfTkC9q927fTs4A02F6L
 sHfLvCpfuB4rOjXy6LSd1gMGWIcjotZai+idHBqtNLLVz6exF1QpUCp+pZjEULbA
 /Sx9lk8A3cYoa8pTu1NrrZbZX17iHkFswqMF3T20nhUN9+Ti597ZEbRcWDcoEZtw
 v2NznOTJ7Mm2SrNHOvDklstggNIGcwiAEePGMo7rJNEQZChpDjQj/gJWKzn0UwL4
 zfk+0EzoejPdvZ5FJUfmlr8Tqk53uw+y7/0xQ6gf8lDviTrzzoeXtJUyumGBiuGx
 RxFywf8n02oLYRJm5hu+0NkC+/bX0Lxg/kwiR6FLBFbBFgkWyp7FGcxhlm6ZiBfe
 0KkPciWslNavn5KhljIkZDbXymbvhhSr9uBEFsyeJueA5q7sSghWloL8Ag1cac3W
 e6swD1ngXtM/t5gjOLhR
 =hC7z
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "We have two changes to the core framework this time around.

  The first being a large change that introduces runtime PM support to
  the clk framework. Now we properly call runtime PM operations on the
  device providing a clk when the clk is in use. This helps on SoCs
  where the clks provided by a device need something to be powered on
  before using the clks, like power domains or regulators. It also helps
  power those things down when clks aren't in use.

  The other core change is a devm API addition for clk providers so we
  can get rid of a bunch of clk driver remove functions that are just
  doing of_clk_del_provider().

  Outside of the core, we have the usual addition of clk drivers and
  smattering of non-critical fixes to existing drivers. The biggest diff
  is support for Mediatek MT2712 and MT7622 SoCs, but those patches
  really just add a bunch of data.

  By the way, we're trying something new here where we build the tree up
  with topic branches. We plan to work this into our workflow so that we
  don't step on each other's toes, and so the fixes branch can be merged
  on an as-needed basis.

  Summary:

  Core:
   - runtime PM support for clk providers
   - devm API for of_clk_add_hw_provider()

  New Drivers:
   - Mediatek MT2712 and MT7622
   - Renesas R-Car V3M SoC

  Updates:
   - runtime PM support for Samsung exynos5433/exynos4412 providers
   - removal of clkdev aliases on Samsung SoCs
   - convert clk-gpio to use gpio descriptors
   - various driver cleanups to match kernel coding style
   - Amlogic Video Processing Unit VPU and VAPB clks
   - sigma-delta modulation for Allwinner audio PLLs
   - Allwinner A83t Display clks
   - support for the second display unit clock on Renesas RZ/G1E
   - suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
   - new clock ids for Rockchip rk3188 and rk3368 SoCs
   - various 'const' markings on clk_ops structures
   - RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
  clk: stm32h7: fix test of clock config
  clk: pxa: fix building on older compilers
  clk: sunxi-ng: a83t: Fix i2c buses bits
  clk: ti: dra7-atl-clock: fix child-node lookups
  clk: qcom: common: fix legacy board-clock registration
  clk: uniphier: fix DAPLL2 clock rate of Pro5
  clk: uniphier: fix parent of miodmac clock data
  clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
  clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
  clk: hi3660: fix incorrect uart3 clock freqency
  clk: kona-setup: Delete error messages for failed memory allocations
  ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
  clk: cdce925: remove redundant check for non-null parent_name
  clk: versatile: Improve sizeof() usage
  clk: versatile: Delete error messages for failed memory allocations
  clk: ux500: Improve sizeof() usage
  clk: ux500: Delete error messages for failed memory allocations
  clk: spear: Delete error messages for failed memory allocations
  clk: ti: Delete error messages for failed memory allocations
  clk: mmp: Adjust checks for NULL pointers
  ...
2017-11-17 20:04:24 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Sean Wang 2fc0a509e4 clk: mediatek: add clock support for MT7622 SoC
Add all supported clocks exported from every susbystem found on MT7622 SoC
such as topckgen, apmixedsys, infracfg, pericfg , pciessys, ssusbsys,
ethsys and audsys.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 01:10:12 -07:00
Chen Zhong c955bf3998 clk: mediatek: add the option for determining PLL source clock
Since the previous setup always sets the PLL using crystal 26MHz, this
doesn't always happen in every MediaTek platform. So the patch added
flexibility for assigning extra member for determining the PLL source
clock.

Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 01:07:51 -07:00
Arnd Bergmann 5ef288d42a clk: mediatek: mark mtk_infrasys_init_early __init
On gcc-4.6, we get a harmless link-time warning:

WARNING: vmlinux.o(.text.unlikely+0x196a0): Section mismatch in reference from the function mtk_infrasys_init_early() to the function .init.text:mtk_clk_register_cpumuxes()
The function mtk_infrasys_init_early() references
the function __init mtk_clk_register_cpumuxes().
This is often because mtk_infrasys_init_early lacks a __init
annotation or the annotation of mtk_clk_register_cpumuxes is wrong.

Newer compilers inline this function so they don't warn, but
marking it __init is the right solution for all versions.

Fixes: e986211827 ("clk: mediatek: Add MT2701 clock support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 01:06:15 -07:00
weiyi.lu@mediatek.com e2f744a82d clk: mediatek: Add MT2712 clock support
Add MT2712 clock support, include topckgen, apmixedsys,
infracfg, pericfg, mcucfg and subsystem clocks.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
[sboyd@codeaurora.org: Static on top_clk_data]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-11-02 01:02:53 -07:00
Rob Herring 1667393126 clk: Convert to using %pOF instead of full_name
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-21 15:49:54 -07:00
Sean Wang fa12167ced clk: mediatek: fixed static checker warning in clk_cpumux_get_parent call
Fixed the signedness bug returning '(-22)' on the return type as u8 with
removing the sanity checker in clk_cpumux_get_parent() since
clk_cpumux_set_parent() always ensures validity in clk_cpumux_get_parent()
got called.

Fixes: 1e17de9049 ("clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-07-17 18:17:28 -07:00
Sean Wang 567bf2ed86 clk: mediatek: export cpu multiplexer clock for MT8173 SoCs
The patch enables CPU multiplexer clock on MT8173 SoC which fixes up
cpufreq driver fails at acquiring intermediate clock source when driver
probe is called.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19 19:02:44 -07:00
Sean Wang 43ed50ee5a clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs
The patch enables CPU multiplexer clock on MT2701/MT7623 SoC which fixes
up cpufreq driver fails at acquiring intermediate clock source when driver
probe is called.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19 19:02:44 -07:00
Sean Wang 1e17de9049 clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work
This patch adds CPU multiplexer clocks which are essential for Mediatek
cpufreq driver. It would use the CPU clock multiplexer to switch to the
intermediate clock source temporarily and then wait for the primary clock
changing getting stable.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-06-19 19:02:43 -07:00
John Crispin db9c4a1e65 clk: mediatek: add mt2701 ethernet reset
The ethernet clock core has a reset register that is currently not exposed
to the user. Fix this by adding the missing registration code.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-21 19:20:33 -07:00
Kevin-CW Chen 96596aa066 clk: mediatek: add clk support for MT6797
Add MT6797 clock support, include topckgen, apmixedsys, infracfg
and subsystem clocks

Signed-off-by: Kevin-CW Chen <kevin-cw.chen@mediatek.com>
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-04-19 09:20:21 -07:00
Jean Delvare 3d21a4b646 clk: mediatek: Fix MT8135 dependencies
The MT8135 is a 32-bit SoC, so only propose it on ARM architecture,
not ARM64.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 234d511d8c ("clk: mediatek: Add hardware dependency")
Cc: Andreas Färber <afaerber@suse.de>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26 16:04:31 -08:00
Jean Delvare 6e9c0d5a33 clk: mediatek: Fix MT2701 dependencies
If I say "no" to "Clock driver for Mediatek MT2701", I don't want to
be asked individually about each sub-driver. No means no.

Additionally, this driver shouldn't be proposed at all on non-mediatek
builds, unless build-testing.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e986211827 ("clk: mediatek: Add MT2701 clock support")
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: James Liao <jamesjj.liao@mediatek.com>
Cc: Shunli Wang <shunli.wang@mediatek.com>
Cc: Erin Lo <erin.lo@mediatek.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-26 16:04:15 -08:00
Shunli Wang 8c1ee96a2f reset: mediatek: Add MT2701 reset driver
In infrasys and perifsys, there are many reset
control bits for kinds of modules. These bits are
used as actual reset controllers to be registered
into kernel's generic reset controller framework.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08 15:59:51 -08:00
Shunli Wang e986211827 clk: mediatek: Add MT2701 clock support
Add MT2701 clock support, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-08 15:59:49 -08:00
Jean Delvare 234d511d8c clk: mediatek: Add hardware dependency
Only propose the mediatek clock drivers on this platform, unless
build-testing.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Shunli Wang <shunli.wang@mediatek.com>
Cc: James Liao <jamesjj.liao@mediatek.com>
Cc: Erin Lo <erin.lo@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17 15:22:26 -07:00
Arvind Yadav af9083627b clk: mediatek: clk-mt8173: Unmap region obtained by of_iomap
Free memory mapping if init is not successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-21 01:06:07 -07:00
James Liao 2886c84681 clk: mediatek: Refine the makefile to support multiple clock drivers
Add a Kconfig to define clock configuration for each SoC, and
modify the Makefile to build drivers that only selected in config.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:18:38 -07:00
James Liao 928f3bfb81 clk: mediatek: remove __init from clk registration functions
Remove __init from functions that will be used by init functions
that support probe deferral.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-18 17:15:30 -07:00
Philipp Zabel ac4b128031 clk: mediatek: remove hdmitx_dig_cts from TOP clocks
The hdmitx_dig_cts clock signal is not a child of tvdpll_445p5m,
but is routed out of the HDMI PHY module.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-06 17:47:42 +02:00
Philipp Zabel 4585945bf1 clk: mediatek: Add hdmi_ref HDMI PHY PLL reference clock output
The configurable hdmi_ref output of the PLL block is derived from
the tvdpll_594m clock signal via a configurable PLL post-divider.
It is used as the PLL reference input to the HDMI PHY module.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-06 17:47:40 +02:00
Philipp Zabel 06445994fe clk: mediatek: make dpi0_sel propagate rate changes
This mux is supposed to select a fitting divider after the PLL
is already set to the correct rate.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-05-06 17:47:39 +02:00
Philipp Zabel f39bb4579c clk: mediatek: Make reset_control_ops const
The mtk_reset_ops structure is never modified. Make it const.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-29 16:29:19 -07:00
Stephen Boyd 3d08f1564b clk: mediatek: Remove CLK_IS_ROOT
This flag is a no-op now. Remove usage of the flag.

Acked-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-02 17:44:06 -08:00
James Liao 4974259e18 clk: mediatek: Fix memory leak on clock init fail
mtk_clk_register_composite() may leak memory due to some error
handling path don't free all allocated memory. This patch
free all pointers that may allocate memory before error return.
And it's safe because kfree() can handle NULL pointers.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29 13:02:51 -08:00
Geliang Tang 5fd9c05c84 clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h
to_clk_*(_hw) macros have been repeatedly defined in many places.
This patch moves all the to_clk_*(_hw) definitions in the common
clock framework to public header clk-provider.h, and drop the local
definitions.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29 12:59:50 -08:00
James Liao cdb2bab78a clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
Add REF2USB_TX clock support into MT8173 APMIXEDSYS. This clock
is needed by USB 3.0.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01 12:06:00 +08:00
James Liao 29859d9315 clk: mediatek: Add subsystem clocks of MT8173
Most multimedia subsystem clocks will be accessed by multiple
drivers, so it's a better way to manage these clocks in CCF.
This patch adds clock support for MM, IMG, VDEC, VENC and VENC_LT
subsystems.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01 12:04:50 +08:00
James Liao a4f7a15fed clk: mediatek: Fix rate and dependency of MT8173 clocks
Remove the dependency from clk_null, and give all root clocks a
typical rate, include clkph_mck_o, usb_syspll_125m and hdmitx_dig_cts.

dpi_ck was removed due to no clock reference to it.

Replace parent clock of infra_cpum with cpum_ck, which is an external
clock and can be defined in the device tree.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01 12:04:50 +08:00
James Liao 4fa043806a clk: mediatek: Add fixed clocks support for Mediatek SoC.
This patch adds fixed clocks support by using CCF fixed-rate
clock implementation.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01 12:04:49 +08:00
James Liao e02940fc9e clk: mediatek: Add __initdata and __init for data and functions
Add __init for clock registration functions, and add __initdata for
mtk_gate_regs initial structures.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01 12:04:49 +08:00
James Liao 07d130698b clk: mediatek: Remove unused code from MT8173.
Remove unused header files from MT8173, and remove unused
keywords from function declaration.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01 12:04:49 +08:00
James Liao 829f4912d1 clk: mediatek: Removed unused dpi_ck clock from MT8173
The dpi_ck clock can be removed because it not actually used
in topckgen and subsystems.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
2015-10-01 12:04:48 +08:00
Joe.C 2d61fe0fc7 clk: mediatek: add 13mhz clock for MT8173
Add 13mhz clock used by GPT timer in infracfg.

Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
2015-10-01 12:04:34 +08:00
Stephen Boyd 9cfad9bc47 Merge branch 'cleanup-clk-h-includes' into clk-next
* cleanup-clk-h-includes: (62 commits)
  clk: Remove clk.h from clk-provider.h
  clk: h8300: Remove clk.h and clkdev.h includes
  clk: at91: Include clk.h and slab.h
  clk: ti: Switch clk-provider.h include to clk.h
  clk: pistachio: Include clk.h
  clk: ingenic: Include clk.h
  clk: si570: Include clk.h
  clk: moxart: Include clk.h
  clk: cdce925: Include clk.h
  clk: Include clk.h in clk.c
  clk: zynq: Include clk.h
  clk: ti: Include clk.h
  clk: sunxi: Include clk.h and remove unused clkdev.h includes
  clk: st: Include clk.h
  clk: qcom: Include clk.h
  clk: highbank: Include clk.h
  clk: bcm: Include clk.h
  clk: versatile: Remove clk.h and clkdev.h includes
  clk: ux500: Remove clk.h and clkdev.h includes
  clk: tegra: Properly include clk.h
  ...
2015-07-28 11:59:09 -07:00
James Liao 75ce0cdb62 clk: mediatek: Add MT8173 MMPLL change rate support
MT8173 MMPLL frequency settings are different from common PLLs.
It needs different post divider settings for some ranges of frequency.
This patch add support for MT8173 MMPLL frequency setting by adding
div-rate table to lookup suitable post divider setting under a
specified frequency.

Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28 11:58:57 -07:00