This fixes "void function return statements are not generally useful"
checkpatch.pl warning slicoss.c
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch for the slicoss.c file that fixes four instances
of the following warning:
WARNING: else is not generally useful after a break or return
Signed-off-by: Vincent Heuken <me@vincentheuken.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First, don't print pci device information or driver prefixes, this
is already printed by dev_err. Next, don't report error messages
via dev_err when the failing function already reports all errors
via dev_err.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the private linked list of netdev structs. This list isn't
being used anyway.
This patch has no noticable effect.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
slic_config_get() can fail. Change the return type from void to
int and handle the error in slic_card_init(). So now, instead of
silently failing (and then timing out waiting for the config data),
the driver will fail loudly at request time.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove fail_on_bad_eeprom, which was always 0 and thus being used
to ignore incorrect checksumming. This means devices with corrupt
eeprom will now cause the driver to fail.
Since fail_on_bad_eeprom was the last member in use of struct
slic_reg_params, remove that struct altogether.
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite slic_eeprom_cksum() to fix bugs and make readable. This patch
technically has no effect on the user as failed eeprom checksums are
ignored anyway.
The original implementation had the following issues:
1. 2 of the 3 unrolled loops had the following bug:
while ((len -= 32) >= 0) {
[...]
sum += w[15];
w = (u16 *)((ulong) w + 16); /* verify */
}
This processes 32-bytes of data but only increments the word
pointer by 16 bytes. Fixing both of these bugs seems to fix
slic_eeprom_cksum().
2. Non-descriptive variable names, use of unions, and macros that
change local state make the code difficult to read.
3. The checksum loop is unrolled which makes the code harder to
reason about while providing small performance improvement:
- max eeprom length is 0x80 bytes (MAX_EECODE_SIZE), that's
only 0x40 iterations
- checksum is only computed during pci probe(), so not very
often
Tested on Mojave card
Signed-off-by: David Matlack <matlackdavid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a use-after-free bug that causes a null pointer
dereference in slic_entry_halt.
Since unregister_netdev() will ultimately call slic_entry_halt (the
net_device ndo_stop() virtual function for this device), we should
call it before freeing the memory used by slic_entry_halt.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a bug that only manifests when the physical address of
the interrupt status register is >4GB. Specifically, the driver was only
telling the device about the lower 32 bits of the ISR. This patch adds
the upper 32 bits.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a memory leak in slic_card_init. If the driver fails
to poll for an interrupt after requesting config data from the device
the dma memory is never freed.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the TODO file, this patch removes the gratuitous debug
infrastructure. As an extra incentive for removing this code,
the debugfs files are not cleaned up properly. For example, if
register_netdev() fails in slic_entry_probe() then all debugfs
files get left behind, even after the driver module is unloaded.
Touching these files quickly leads to an oops.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes two fields from the private "struct adapter".
Specifically,
memorybase duplicate of slic_regs
memorylength written once and never read. This field is trivially
computed with pci_resource_len if it's ever needed in
the future.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes two free-after-free bugs in slic_entry_remove.
Specifically, slic_unmap_mmio_space() iounmaps adapter->slic_regs,
which is the same region of memory as dev->base_addr (iounmap-ed
a few lines later).
Next, both release_mem_region() and pci_release_regions() are called
on the same pci_dev struct.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a use-after-free bug that can cause a kernel
oops. If slic_card_init fails then slic_entry_probe (the pci
probe() function for this device) will return error without
cleaning up memory.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following smatch warning:
slicoss/slicoss.c:1429 slic_cmdq_addcmdpage() error: we previously assumed 'pslic_handle' could be null
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure iounmap is always called after ioremap when module loading
fails. Also remove a call to release_mem_region because that region is
never reserved in the first place.
Fixes the following issue reported by Coccinelle:
drivers/staging/slicoss/slicoss.c:3727:1-7: ERROR: missing iounmap; ioremap on line 3661 and execution via conditional on line 3677
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves the macro "SLIC_GET_SLIC_HANDLE(_adapter, _pslic_handle)" to inline
in slicoss.c since it has been used only once.
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed unnecessary line continuations in slicoss.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
This patch removes unused macro in slicoss.c as mentioned in TODO tasks.
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
This patch fixes the following checkpatch.pl issues in slicoss.c
WARNING: unnecessary whitespace before a quoted newline in slicoss.c
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl issues in slicoss.c
WARNING: quoted string split across lines
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl issues in slic.h:
WARNING: line over 80 characters
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding a MAINTAINERS entry with content from the README.
Move the TODO items from the README to a separate TODO file.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not call kfree() till timer function is finished.
[This was found using grep. Compiled tested only]
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: Joe Perches <joe@perches.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
And use the normal is_<foo>_ether_addr functions and ETH_ALEN too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning in slicoss.c-
WARNING: quoted string split across lines
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning in slicoss.c:
WARNING: Too many leading tabs - consider code refactoring
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning in slicoss.c:
WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then
pr_debug(... to printk(KERN_DEBUG ...
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warning in slicoss.c:
WARNING: debugfs_remove(NULL) is safe this check is probably not
required
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Preliminary to removing compare_ether_addr altogether:
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.
Additionally:
Used is_zero_ether_addr, removed now unused variable
Converted uses of &foo[0] to foo
Done via cocci script: (and a little typing)
$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
- !compare_ether_addr(a, b)
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- compare_ether_addr(a, b)
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) == 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !ether_addr_equal(a, b) != 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) == 0
+ !ether_addr_equal(a, b)
@@
expression a,b;
@@
- ether_addr_equal(a, b) != 0
+ ether_addr_equal(a, b)
@@
expression a,b;
@@
- !!ether_addr_equal(a, b)
+ ether_addr_equal(a, b)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some fields in "edata" which have not been cleared. One
example is edata.cmd. It leaks uninitialized stack information to the
user.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliminate some warnings by casting to unsigned long before
casting a dma_addr_t value to a pointer.
btw:
Does slicoss always work on x86-32?
Is a pshmem guaranteed to be accessible
by a 32 bit address?
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of performing the hash calculation for the mac address by ourself, we
can simply reuse ether_crc and shift only the result according to our
needs.
The code was tested against the previous implementation by verifying both
implementations against each other in userspace for 16200000000 different
mac addresses, changing the vendor bits of the mac address first.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
smatch complains about a possible buffer overflow
slicoss.c:3651 slic_card_locate() error: buffer overflow
'physcard->adapter' 4 <= 4
If the for loop is not exited prematurely i++ is executed after the last
iteration and thus i can be 4, which is out of bounds for
physcard->adapter.
-> Add check for this condition and simplify the if statement by
inverting the condition.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc complains about an undefined operation:
slicoss.c:1417:19: warning: operation on 'rspq->pageindex' may be
undefined [-Wsequence-point]
The intended operation was (probably) to retrieve the pageindex + 1 and let
it wrap around if it reaches the num_pages.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skbtype is assigned once to NORMAL_ETHFRAME and then checked if it is
NORMAL_ETHFRAME -> remove the checks.
This also gets rid of the (false positive) smatch warning:
slicoss.c:2829 slic_xmit_start() error: potential NULL dereference
'hcmd'.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch complains that the variable adapter is dereferenced before it is
checked:
slicoss.c:906 slic_timer_load_check() warn: variable dereferenced before
check 'adapter' (see line 904)
-> move the assignment after the check.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes all instances of
"Please, no spaces at start of a new line"
"Please, no spaces before tabs"
Please note that I probably got the warning names wrong,
but they should be close enough for usage here :)
Additional post-commit note: There is one comment on line 230ish in slic.h
that appears to have lost it's formatting. It was fine when I was working
in Geany, but it caught my eye in the below diff. Sorry if it actually happened!
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The errors fixed are all instances of
"ERROR: do not use assignment in if condition"
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I'm assuming that "CRC shit reg" is referencing the CRC register/registry.
Please ignore this patch if "shit" is actually in context
Signed-off-by: Cruz Julian Bishop <cruzjbishop@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
slic_card_locate does a kzalloc of physcard, and if it fails,
in my previous patch i returned -ENOMEM, but left the driver leak
the memory if card_hostid == SLIC_HOSTID_DEFAULT,
fix this memory leak if the above condition is true
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this function memset's the cmdqmem, instead do it in slic_cmdq_init.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dilek Uzulmez
Quentin Lambert
Joe Perches
Vincent Heuken
David Matlack
David Matlack
Monam Agarwal
Kristina Martšenko
Gulsah Kose
Kirill Tkhai
Jingoo Han
Rashika Kheria
Wei Yongjun
Dan Carpenter
Peter Huewe
Cruz Julian Bishop
Bill Pemberton
Devendra Naga