Граф коммитов

4713 Коммитов

Автор SHA1 Сообщение Дата
Ming Lei 83c9c54716 fs: move guard_bio_eod() after bio_set_op_attrs
Commit 85a8ce62c2 ("block: add bio_truncate to fix guard_bio_eod")
adds bio_truncate() for handling bio EOD. However, bio_truncate()
doesn't use the passed 'op' parameter from guard_bio_eod's callers.

So bio_trunacate() may retrieve wrong 'op', and zering pages may
not be done for READ bio.

Fixes this issue by moving guard_bio_eod() after bio_set_op_attrs()
in submit_bh_wbc() so that bio_truncate() can always retrieve correct
op info.

Meantime remove the 'op' parameter from guard_bio_eod() because it isn't
used any more.

Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Fixes: 85a8ce62c2 ("block: add bio_truncate to fix guard_bio_eod")
Signed-off-by: Ming Lei <ming.lei@redhat.com>

Fold in kerneldoc and bio_op() change.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-09 08:16:12 -07:00
Ming Lei 429120f3df block: fix splitting segments on boundary masks
We ran into a problem with a mpt3sas based controller, where we would
see random (and hard to reproduce) file corruption). The issue seemed
specific to this controller, but wasn't specific to the file system.
After a lot of debugging, we find out that it's caused by segments
spanning a 4G memory boundary. This shouldn't happen, as the default
setting for segment boundary masks is 4G.

Turns out there are two issues in get_max_segment_size():

1) The default segment boundary mask is bypassed

2) The segment start address isn't taken into account when checking
   segment boundary limit

Fix these two issues by removing the bypass of the segment boundary
check even if the mask is set to the default value, and taking into
account the actual start address of the request when checking if a
segment needs splitting.

Cc: stable@vger.kernel.org # v5.1+
Reviewed-by: Chris Mason <clm@fb.com>
Tested-by: Chris Mason <clm@fb.com>
Fixes: dcebd75592 ("block: use bio_for_each_bvec() to compute multi-page bvec count")
Signed-off-by: Ming Lei <ming.lei@redhat.com>

Dropped const on the page pointer, ppc page_to_phys() doesn't mark the
page as const...

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-30 08:51:18 -07:00
Ming Lei 85a8ce62c2 block: add bio_truncate to fix guard_bio_eod
Some filesystem, such as vfat, may send bio which crosses device boundary,
and the worse thing is that the IO request starting within device boundaries
can contain more than one segment past EOD.

Commit dce30ca9e3 ("fs: fix guard_bio_eod to check for real EOD errors")
tries to fix this issue by returning -EIO for this situation. However,
this way lets fs user code lose chance to handle -EIO, then sync_inodes_sb()
may hang for ever.

Also the current truncating on last segment is dangerous by updating the
last bvec, given bvec table becomes not immutable any more, and fs bio
users may not retrieve the truncated pages via bio_for_each_segment_all() in
its .end_io callback.

Fixes this issue by supporting multi-segment truncating. And the
approach is simpler:

- just update bio size since block layer can make correct bvec with
the updated bio size. Then bvec table becomes really immutable.

- zero all truncated segments for read bio

Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Fixed-by: dce30ca9e3 ("fs: fix guard_bio_eod to check for real EOD errors")
Reported-by: syzbot+2b9e54155c8c25d8d165@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-28 09:44:56 -07:00
Arnd Bergmann b2c0fcd287 compat_ioctl: block: handle Persistent Reservations
These were added to blkdev_ioctl() in linux-5.5 but not
blkdev_compat_ioctl, so add them now.

Cc: <stable@vger.kernel.org> # v4.4+
Fixes: bbd3e06436 ("block: add an API for Persistent Reservations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fold in followup patch from Arnd with missing pr.h header include.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-21 07:26:56 -07:00
Arnd Bergmann 4b43f31d65 compat_ioctl: block: handle add zone open, close and finish ioctl
These were added to blkdev_ioctl() in linux-5.5 but not
blkdev_compat_ioctl, so add them now.

Fixes: e876df1fe0 ("block: add zone open, close and finish ioctl support")
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-21 07:26:41 -07:00
Arnd Bergmann 21d3734091 compat_ioctl: block: handle BLKGETZONESZ/BLKGETNRZONES
These were added to blkdev_ioctl() in v4.20 but not blkdev_compat_ioctl,
so add them now.

Cc: <stable@vger.kernel.org> # v4.20+
Fixes: 72cd87576d ("block: Introduce BLKGETZONESZ ioctl")
Fixes: 65e4e3eee8 ("block: Introduce BLKGETNRZONES ioctl")
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-21 07:26:41 -07:00
Arnd Bergmann 673bdf8ce0 compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE
These were added to blkdev_ioctl() but not blkdev_compat_ioctl,
so add them now.

Cc: <stable@vger.kernel.org> # v4.10+
Fixes: 3ed05a987e ("blk-zoned: implement ioctls")
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-21 07:26:40 -07:00
Yang Yingliang 3b7995a98a block: fix memleak when __blk_rq_map_user_iov() is failed
When I doing fuzzy test, get the memleak report:

BUG: memory leak
unreferenced object 0xffff88837af80000 (size 4096):
  comm "memleak", pid 3557, jiffies 4294817681 (age 112.499s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    20 00 00 00 10 01 00 00 00 00 00 00 01 00 00 00   ...............
  backtrace:
    [<000000001c894df8>] bio_alloc_bioset+0x393/0x590
    [<000000008b139a3c>] bio_copy_user_iov+0x300/0xcd0
    [<00000000a998bd8c>] blk_rq_map_user_iov+0x2f1/0x5f0
    [<000000005ceb7f05>] blk_rq_map_user+0xf2/0x160
    [<000000006454da92>] sg_common_write.isra.21+0x1094/0x1870
    [<00000000064bb208>] sg_write.part.25+0x5d9/0x950
    [<000000004fc670f6>] sg_write+0x5f/0x8c
    [<00000000b0d05c7b>] __vfs_write+0x7c/0x100
    [<000000008e177714>] vfs_write+0x1c3/0x500
    [<0000000087d23f34>] ksys_write+0xf9/0x200
    [<000000002c8dbc9d>] do_syscall_64+0x9f/0x4f0
    [<00000000678d8e9a>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

If __blk_rq_map_user_iov() is failed in blk_rq_map_user_iov(),
the bio(s) which is allocated before this failing will leak. The
refcount of the bio(s) is init to 1 and increased to 2 by calling
bio_get(), but __blk_rq_unmap_user() only decrease it to 1, so
the bio cannot be freed. Fix it by calling blk_rq_unmap_user().

Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20 11:52:01 -07:00
Bart Van Assche b3c6a59975 block: Fix a lockdep complaint triggered by request queue flushing
Avoid that running test nvme/012 from the blktests suite triggers the
following false positive lockdep complaint:

============================================
WARNING: possible recursive locking detected
5.0.0-rc3-xfstests-00015-g1236f7d60242 #841 Not tainted
--------------------------------------------
ksoftirqd/1/16 is trying to acquire lock:
000000000282032e (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

but task is already holding lock:
00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&fq->mq_flush_lock)->rlock);
  lock(&(&fq->mq_flush_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

1 lock held by ksoftirqd/1/16:
 #0: 00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

stack backtrace:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3-xfstests-00015-g1236f7d60242 #841
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 dump_stack+0x67/0x90
 __lock_acquire.cold.45+0x2b4/0x313
 lock_acquire+0x98/0x160
 _raw_spin_lock_irqsave+0x3b/0x80
 flush_end_io+0x4e/0x1d0
 blk_mq_complete_request+0x76/0x110
 nvmet_req_complete+0x15/0x110 [nvmet]
 nvmet_bio_done+0x27/0x50 [nvmet]
 blk_update_request+0xd7/0x2d0
 blk_mq_end_request+0x1a/0x100
 blk_flush_complete_seq+0xe5/0x350
 flush_end_io+0x12f/0x1d0
 blk_done_softirq+0x9f/0xd0
 __do_softirq+0xca/0x440
 run_ksoftirqd+0x24/0x50
 smpboot_thread_fn+0x113/0x1e0
 kthread+0x121/0x140
 ret_from_fork+0x3a/0x50

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20 11:52:01 -07:00
Bart Van Assche c44a4edb20 block: Fix the type of 'sts' in bsg_queue_rq()
This patch fixes the following sparse warnings:

block/bsg-lib.c:269:19: warning: incorrect type in initializer (different base types)
block/bsg-lib.c:269:19:    expected int sts
block/bsg-lib.c:269:19:    got restricted blk_status_t [usertype]
block/bsg-lib.c:286:16: warning: incorrect type in return expression (different base types)
block/bsg-lib.c:286:16:    expected restricted blk_status_t
block/bsg-lib.c:286:16:    got int [assigned] sts

Cc: Martin Wilck <mwilck@suse.com>
Fixes: d46fe2cb2d ("block: drop device references in bsg_queue_rq()")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-20 11:52:01 -07:00
Roman Penyaev c58c1f8343 block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT
Non-mq devs do not honor REQ_NOWAIT so give a chance to the caller to repeat
request gracefully on -EAGAIN error.

The problem is well reproduced using io_uring:

   mkfs.ext4 /dev/ram0
   mount /dev/ram0 /mnt

   # Preallocate a file
   dd if=/dev/zero of=/mnt/file bs=1M count=1

   # Start fio with io_uring and get -EIO
   fio --rw=write --ioengine=io_uring --size=1M --direct=1 --name=job --filename=/mnt/file

Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17 09:01:43 -07:00
Tejun Heo d7bd15a138 iocost: over-budget forced IOs should schedule async delay
When over-budget IOs are force-issued through root cgroup,
iocg_kick_delay() adjusts the async delay accordingly but doesn't
actually schedule async throttle for the issuing task.  This bug is
pretty well masked because sooner or later the offending threads are
gonna get directly throttled on regular IOs or have async delay
scheduled by mem_cgroup_throttle_swaprate().

However, it can affect control quality on filesystem metadata heavy
operations.  Let's fix it by invoking blkcg_schedule_throttle() when
iocg_kick_delay() says async delay is needed.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Cc: stable@vger.kernel.org
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-16 16:10:17 -07:00
Linus Torvalds f1fcd7786e for-linus-20191212
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3y54EQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpqJuD/93LZmzS5UEWrNLkRaAaCyAy40MPxuXRZEp
 42yk7cvAT4OcCr+W6nkAgG6IHGRXOz8QvOzt0P5/HfugpNlB2oz5a/6+TiTtcZTt
 YNt0Z4yuBMU5SXIIxc3lUMcJGxslzOr+L+9ZXD4u5UqIdG1fSrECAexSCrlmmTwu
 Fx02TakDc/bbUYDfLAQD1+/Z066rp1ZWDkjXqA4kUvbFzt8F7qEOc1Evq47SuR7d
 Iw0bM3LVASXwTq2lRc1bFFL2glku6wwkccjwdyjSrQmK4+8LhF396fQGtXuj0Mrs
 OzuWhaOoGhan7dpj1D8e4tqugflQy9rv9bcy6Z9PjBY+VauuFdgPr3iFcwPaPbXm
 17ir4y7xJJxXlhZl/Bn06KIB2h+nLWDIaundFys5JnMmTiZvWIgSJ6Q3gWtMxgfH
 zWZLMw/UtRAmjHhLqvGsMaBTfgKX5ATpMbfGeZeXheVtVaOgGTunXunT56o7oRHB
 q4XWZqbydsYyHBUhgSzhBr03i67wbotxtebqg9VZ0UD8XM4iM8Kor/DleK03oUqD
 DsltKF66NAGNeOcV3TNzJuXHyF6S/vZdO7JdFHY29+pdljoTj5GB88+W9CbhwQRe
 WiKVpq7sAe/bh0wtqrD+QCByjSNSVU62kVgRhfqms47804j/vNqNvOKaC5UWTd0I
 2LG4jfSbeg==
 =hmxJ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20191212' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - stable fix for the bi_size overflow. Not a corruption issue, but a
   case wher we could merge but disallowed (Andreas)

 - NVMe pull request via Keith, with various fixes.

 - MD pull request from Song.

 - Merge window regression fix for the rq passthrough stats (Logan)

 - Remove unused blkcg_drain_queue() function (Guoqing)

* tag 'for-linus-20191212' of git://git.kernel.dk/linux-block:
  blk-cgroup: remove blkcg_drain_queue
  block: fix NULL pointer dereference in account statistics with IDE
  md: make sure desc_nr less than MD_SB_DISKS
  md: raid1: check rdev before reference in raid1_sync_request func
  raid5: need to set STRIPE_HANDLE for batch head
  block: fix "check bi_size overflow before merge"
  nvme/pci: Fix read queue count
  nvme/pci Limit write queue sizes to possible cpus
  nvme/pci: Fix write and poll queue types
  nvme/pci: Remove last_cq_head
  nvme: Namepace identification descriptor list is optional
  nvme-fc: fix double-free scenarios on hw queues
  nvme: else following return is not needed
  nvme: add error message on mismatching controller ids
  nvme_fc: add module to ops template to allow module references
  nvmet-loop: Avoid preallocating big SGL for data
  nvme-fc: Avoid preallocating big SGL for data
  nvme-rdma: Avoid preallocating big SGL for data
2019-12-13 14:27:19 -08:00
Guoqing Jiang 5addeae1be blk-cgroup: remove blkcg_drain_queue
Since blk_drain_queue had already been removed, so this function
is not needed anymore.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-12 09:26:55 -07:00
Logan Gunthorpe ecb6186cf7 block: fix NULL pointer dereference in account statistics with IDE
The IDE driver creates some passthru requests which never get
submitted to the block layer in such a way that blk_account_io_start()
gets called. However, the driver still calls __blk_mq_end_request() in
ide_end_rq() which will call blk_account_io_completion() which tries
to dereferences req->part which is never set. See ide_prep_sense() for
an example of where these requests come from.

To fix this, blk_account_io_completion() and blk_account_io_done()
should do nothing if req->part is not set.

The back trace of this bug is:

    BUG: kernel NULL pointer dereference, address: 000002ac
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    *pde = 00000000
    Oops: 0002 [#1]
    CPU: 0 PID: 237 Comm: kworker/0:1H Not tainted
    5.4.0-rc2-00011-g48d9b0d43105e #1
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1
    04/01/2014
    Workqueue: kblockd drive_rq_insert_work
    EIP: blk_account_io_completion+0x7a/0xf0
    Code: 89 54 24 08 31 d2 89 4c 24 04 31 c9 c7 04 24 02 00 00 00 c1 ee
    09 e8 f5 21 a6 ff e8 70 5c a7 ff 8b 53 60 8d 04 bd 00 00 00 00 <01> b4
    02 ac 02 00 00 8b 9a 88 02 00 00 85 db 74 11 85 d2 74 51 8b
    EAX: 00000000 EBX: f5b80000 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: 00000000 EBP: f3031e70 ESP: f3031e54
    DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010046
    CR0: 80050033 CR2: 000002ac CR3: 03c25000 CR4: 000406d0
    Call Trace:
     <IRQ>
      blk_update_request+0x85/0x420
      ide_end_rq+0x38/0xa0
      ide_complete_rq+0x3d/0x70
      cdrom_newpc_intr+0x258/0xba0
      ide_intr+0x135/0x250
      __handle_irq_event_percpu+0x3e/0x250
      handle_irq_event_percpu+0x1f/0x50
      handle_irq_event+0x32/0x60
      handle_level_irq+0x6c/0x110
      handle_irq+0x72/0xa0
      </IRQ>
      do_IRQ+0x45/0xad
      common_interrupt+0x115/0x11c

Fixes: 48d9b0d431 ("block: account statistics for passthrough requests")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-12 08:12:50 -07:00
Andreas Gruenbacher cc90bc6842 block: fix "check bi_size overflow before merge"
This partially reverts commit e3a5d8e386.

Commit e3a5d8e386 ("check bi_size overflow before merge") adds a bio_full
check to __bio_try_merge_page.  This will cause __bio_try_merge_page to fail
when the last bi_io_vec has been reached.  Instead, what we want here is only
the bi_size overflow check.

Fixes: e3a5d8e386 ("block: check bi_size overflow before merge")
Cc: stable@vger.kernel.org # v5.4+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-09 22:04:35 -07:00
Pankaj Bharadiya c593642c8b treewide: Use sizeof_field() macro
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09 10:36:44 -08:00
Justin Tee ece841abbe block: fix memleak of bio integrity data
7c20f11680 ("bio-integrity: stop abusing bi_end_io") moves
bio_integrity_free from bio_uninit() to bio_integrity_verify_fn()
and bio_endio(). This way looks wrong because bio may be freed
without calling bio_endio(), for example, blk_rq_unprep_clone() is
called from dm_mq_queue_rq() when the underlying queue of dm-mpath
is busy.

So memory leak of bio integrity data is caused by commit 7c20f11680.

Fixes this issue by re-adding bio_integrity_free() to bio_uninit().

Fixes: 7c20f11680 ("bio-integrity: stop abusing bi_end_io")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by Justin Tee <justin.tee@broadcom.com>

Add commit log, and simplify/fix the original patch wroten by Justin.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-05 11:38:36 -07:00
Hou Tao 08802ed665 bfq-iosched: Ensure bio->bi_blkg is valid before using it
bio->bi_blkg will be NULL when the issue of the request
has bypassed the block layer as shown in the following oops:

 Internal error: Oops: 96000005 [#1] SMP
 CPU: 17 PID: 2996 Comm: scsi_id Not tainted 5.4.0 #4
 Call trace:
  percpu_counter_add_batch+0x38/0x4c8
  bfqg_stats_update_legacy_io+0x9c/0x280
  bfq_insert_requests+0xbac/0x2190
  blk_mq_sched_insert_request+0x288/0x670
  blk_execute_rq_nowait+0x140/0x178
  blk_execute_rq+0x8c/0x140
  sg_io+0x604/0x9c0
  scsi_cmd_ioctl+0xe38/0x10a8
  scsi_cmd_blk_ioctl+0xac/0xe8
  sd_ioctl+0xe4/0x238
  blkdev_ioctl+0x590/0x20e0
  block_ioctl+0x60/0x98
  do_vfs_ioctl+0xe0/0x1b58
  ksys_ioctl+0x80/0xd8
  __arm64_sys_ioctl+0x40/0x78
  el0_svc_handler+0xc4/0x270

so ensure its validity before using it.

Fixes: fd41e60331 ("bfq-iosched: stop using blkg->stat_bytes and ->stat_ios")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-05 07:10:09 -07:00
Christoph Hellwig 6c6b354914 block: set the zone size in blk_revalidate_disk_zones atomically
The current zone revalidation code has a major problem in that it
doesn't update the zone size and q->nr_zones atomically, leading
to a short window where an out of bounds access to the zone arrays
is possible.

To fix this move the setting of the zone size into the crticial
sections blk_revalidate_disk_zones so that it gets updated together
with the zone bitmaps and q->nr_zones.  This also slightly simplifies
the caller as it deducts the zone size from the report_zones.

This change also allows to check for a power of two zone size in generic
code.

Reported-by: Hans Holmberg <hans@owltronix.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03 10:18:22 -07:00
Christoph Hellwig ae58954d87 block: don't handle bio based drivers in blk_revalidate_disk_zones
bio based drivers only need to update q->nr_zones.  Do that manually
instead of overloading blk_revalidate_disk_zones to keep that function
simpler for the next round of changes that will rely even more on the
request based functionality.

Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03 08:51:25 -07:00
Christoph Hellwig e94f581944 block: allocate the zone bitmaps lazily
Allocate the conventional zone bitmap and the sequential zone locking
bitmap only when we find a zone of the respective type.  This avoids
wasting memory on the conventional zone bitmap for devices that only
have sequential zones, and will also prepare for other future changes.

Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03 08:51:25 -07:00
Christoph Hellwig f216fdd77b block: replace seq_zones_bitmap with conv_zones_bitmap
Invert the meaning of seq_zones_bitmap by keeping a bitmap of
conventional zones.  This allows not having a bitmap for devices
that do not have conventional zones.

Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03 08:51:25 -07:00
Christoph Hellwig 9b38bb4b1e block: simplify blkdev_nr_zones
Simplify the arguments to blkdev_nr_zones by passing a gendisk instead
of the block_device and capacity.  This also removes the need for
__blkdev_nr_zones as all callers are outside the fast path and can
deal with the additional branch.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03 08:51:24 -07:00
Christoph Hellwig bb55628288 block: remove the empty line at the end of blk-zoned.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03 08:51:24 -07:00
Linus Torvalds 0da522107e compat_ioctl: remove most of fs/compat_ioctl.c
As part of the cleanup of some remaining y2038 issues, I came to
 fs/compat_ioctl.c, which still has a couple of commands that need support
 for time64_t.
 
 In completely unrelated work, I spent time on cleaning up parts of this
 file in the past, moving things out into drivers instead.
 
 After Al Viro reviewed an earlier version of this series and did a lot
 more of that cleanup, I decided to try to completely eliminate the rest
 of it and move it all into drivers.
 
 This series incorporates some of Al's work and many patches of my own,
 but in the end stops short of actually removing the last part, which is
 the scsi ioctl handlers. I have patches for those as well, but they need
 more testing or possibly a rewrite.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdsHCdAAoJEJpsee/mABjZtYkP/1JGl3jFv3Iq/5BCdPkaePP1
 RtMJRNfURgK3GeuHUui330PvVjI/pLWXU/VXMK2MPTASpJLzYz3uCaZrpVWEMpDZ
 +ImzGmgJkITlW1uWU3zOcQhOxTyb1hCZ0Ci+2xn9QAmyOL7prXoXCXDWv3h6iyiF
 lwG+nW+HNtyx41YG+9bRfKNoG0ZJ+nkJ70BV6u0acQHXWn7Xuupa9YUmBL87hxAL
 6dlJfLTJg6q8QSv/Q6LxslfWk2Ti8OOJZOwtFM5R8Bgl0iUcvshiRCKfv/3t9jXD
 dJNvF1uq8z+gracWK49Qsfq5dnZ2ZxHFUo9u0NjbCrxNvWH/sdvhbaUBuJI75seH
 VIznCkdxFhrqitJJ8KmxANxG08u+9zSKjSlxG2SmlA4qFx/AoStoHwQXcogJscNb
 YIXYKmWBvwPzYu09QFAXdHFPmZvp/3HhMWU6o92lvDhsDwzkSGt3XKhCJea4DCaT
 m+oCcoACqSWhMwdbJOEFofSub4bY43s5iaYuKes+c8O261/Dwg6v/pgIVez9mxXm
 TBnvCsotq5m8wbwzv99eFqGeJH8zpDHrXxEtRR5KQqMqjLq/OQVaEzmpHZTEuK7n
 e/V/PAKo2/V63g4k6GApQXDxnjwT+m0aWToWoeEzPYXS6KmtWC91r4bWtslu3rdl
 bN65armTm7bFFR32Avnu
 =lgCl
 -----END PGP SIGNATURE-----

Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
 "As part of the cleanup of some remaining y2038 issues, I came to
  fs/compat_ioctl.c, which still has a couple of commands that need
  support for time64_t.

  In completely unrelated work, I spent time on cleaning up parts of
  this file in the past, moving things out into drivers instead.

  After Al Viro reviewed an earlier version of this series and did a lot
  more of that cleanup, I decided to try to completely eliminate the
  rest of it and move it all into drivers.

  This series incorporates some of Al's work and many patches of my own,
  but in the end stops short of actually removing the last part, which
  is the scsi ioctl handlers. I have patches for those as well, but they
  need more testing or possibly a rewrite"

* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
  scsi: sd: enable compat ioctls for sed-opal
  pktcdvd: add compat_ioctl handler
  compat_ioctl: move SG_GET_REQUEST_TABLE handling
  compat_ioctl: ppp: move simple commands into ppp_generic.c
  compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
  compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
  compat_ioctl: unify copy-in of ppp filters
  tty: handle compat PPP ioctls
  compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
  compat_ioctl: handle SIOCOUTQNSD
  af_unix: add compat_ioctl support
  compat_ioctl: reimplement SG_IO handling
  compat_ioctl: move WDIOC handling into wdt drivers
  fs: compat_ioctl: move FITRIM emulation into file systems
  gfs2: add compat_ioctl support
  compat_ioctl: remove unused convert_in_user macro
  compat_ioctl: remove last RAID handling code
  compat_ioctl: remove /dev/raw ioctl translation
  compat_ioctl: remove PCI ioctl translation
  compat_ioctl: remove joystick ioctl translation
  ...
2019-12-01 13:46:15 -08:00
Linus Torvalds 7e5192b93c for-5.5/disk-revalidate-20191122
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3YA5sQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgplFxEACM7CwrWsullPX6b3j62NW6VepU5JQdzwVW
 S+bmLpb8Z2I4wzEnaVuWAY5hEhGaS9NFtQLdBG0W0YOzH7sweNmL38dZfCE4+oFj
 ZwytpXQQhAQUwkgANJCpNfzDymHduPsTz7RYqRr1plmhna1KC/dnhuMwg8lVOBf5
 myWjqcCHxxoQn6KFqcX9/Azz29ZrgzV28lOnZdiw9yoTjraBmS/ymx4woaa3pc2v
 UNw0Cgx53vHENJzEL9FNSxc0ENZq/bQhpDolnc2AlPGy9+vPg4afMitJb60KTT7r
 HpDcLGkYAIKLrfk8DUmFW8lZhWsxTchXvK2+zwQV7nXMcdUgGN/G3HTIdvWEHFv8
 oGbPB8cfdA2vNC9QAybwWEum/S0H/GfYsBVplNCUCdFXE7yj1cbKD5dPfCyIvmPz
 BjgMae5vH/KoH+vNdZ8NL5oFz2eFC3rLxa/Ss78pcEoBdiiV3WQHPv9MBmn/OQ/v
 CeUAM7omyWpbv3lcByNzIOkeeO3m6Ne28EpEMc2pzLnDPu2btvSyetdO488DE+7O
 MNfApZULVX91W7jWnhM5GR+1SJTdEXZnoxnFV+J/j4deog5vUR7Dt1VkujpUILfL
 7jMl3erF6C53wNrc465z8iLRp1ZM+aTpwatXXRfucNXeomExKK9zF+/+O1ACckUB
 jWDCR9NTcw==
 =e5Lx
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block

Pull disk revalidation updates from Jens Axboe:
 "This continues the work that Jan Kara started to thoroughly cleanup
  and consolidate how we handle rescans and revalidations"

* tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block:
  block: move clearing bd_invalidated into check_disk_size_change
  block: remove (__)blkdev_reread_part as an exported API
  block: fix bdev_disk_changed for non-partitioned devices
  block: move rescan_partitions to fs/block_dev.c
  block: merge invalidate_partitions into rescan_partitions
  block: refactor rescan_partitions
2019-11-25 11:37:01 -08:00
Linus Torvalds 464a47f45d for-5.5/zoned-20191122
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3YAiAQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpsJRD/wNfUGWVdIckw7iiFNuuipKBEy0Nd2VLt0B
 I+pVW/YjDsG2oxWXWPs5Nxc7ca2A8EzRXcWP0xEjBfOCcBh/9mULi1flkLRoWKcq
 v/OuTVif3ATvgJcwNkbMcoi0bYA/VwKi2dWC6ALhDDmZhyMTLeE362oIeOUNNnl6
 GM8CGZHaRfmBzcH5t+WnxiS6rBlt5iwFJ35EvZo3GMXGGiLGlryxEXPAwZrf4haA
 Z4atNinKcNXhb80LWHo23aK3bpnaumwKP4BPuLEyvnjS4iU8SeYTXy+w5yq1BE+h
 HBP5s3no/mPiBAG8b6EZXqOJUGlN596AQfNLu7vCR78tmImZF0jKRFsHEAaKXf+B
 1yRgZi7J+gV0qzK/Ufulg43vItk5/sTzEuV9YLfCpKTr14MFcWw908BAqaI5Kk1K
 e8uGqnb2KbZOLTW4QdPvpWg3eYtqEoluSoZUQ5elHxqQZ4MSZ1lK78FF1TeaW/pw
 sYH+v6rsWoVjEcFSwGoaaOMravzU4MKtavNAZrTJwKZx7qCqkwmi3R1k8WF6KsSV
 rTRAzUC1wpTdSOm1MYPMMKM/h5+BJRSJ/RjljOF4fXLnvpD5q0lequCWjrrEzc6c
 HPRKIgSBq7S620A19QD8UxwvZJ8bOivESqr0bux29v1Vpf7vJBrRMng8nLUrXfJs
 jdma5mK1UA==
 =/G9l
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block

Pull zoned block device update from Jens Axboe:
 "Enhancements and improvements to the zoned device support"

* tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block:
  scsi: sd_zbc: Remove set but not used variable 'buflen'
  block: rework zone reporting
  scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer()
  null_blk: Add zone_nr_conv to features
  null_blk: clean up report zones
  null_blk: clean up the block device operations
  block: Remove partition support for zoned block devices
  block: Simplify report zones execution
  block: cleanup the !zoned case in blk_revalidate_disk_zones
  block: Enhance blk_revalidate_disk_zones()
2019-11-25 11:22:37 -08:00
Linus Torvalds ff6814b078 for-5.5/block-20191121
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3WxrEQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpuH5D/9qQKfIIuQDUNO4Xx+dIHimTDCrfiEOeO9e
 CRaMuSj+yMxLDMwfX8RnDmR17H3ZVoiIY1CT24U9ZkA5iDjeAH4xmzkH30US7LR7
 /64YVZTxB0OrWppRK8RiIhaJJZDQ6+HPUQsn6PRaLVuFHi2unMoTQnj/ZQKz03QA
 Pl8Xx7qBtH1JwYCzQ21f/uryAcNg9eWabRLN2f1uiOXLmvRxOfh6Z/iaezlaZlmL
 qeJdcdLjjvOgOPwEOfNjfS6pd+XBz3gdEhn0l+11nHITxWZmVBwsWTKyUQlCmKnl
 yuCWDVyx5d6zCnlrLYG0l2Fn2lr9SwAkdkq3YAKV03hA/6s6P9q9bm31VvOf828x
 7gmr4YVz68y7H9bM0QAHCvDpjll0aIEUw6XFzSOCDtZ9B6/pppYQWzMU71J05eyF
 8DOKv2M2EVNLUjf6u0RDyolnWGU0kIjt5ryWE3OsGcezAVa2wYstgUJTKbrn1YgT
 j+4KTpaI+sg8GKDFauvxcSa6gwoRp6jweFNW+7vC090/shXmrGmVLOnQZKRuHho/
 O4W8y/1/deM8CCIAETpiNxA8RV5U/EZygrFGDFc7yzTtVDGHY356M/B4Bmm2qkVu
 K3WgeZp8Fc0lH0QF6Pp9ZlBkZEpGNCAPVsPkXIsxQXbctftkn3KY//uIubfpFEB1
 PpHSicvkww==
 =HYYq
 -----END PGP SIGNATURE-----

Merge tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block

Pull core block updates from Jens Axboe:
 "Due to more granular branches, this one is small and will be followed
  with other core branches that add specific features. I meant to just
  have a core and drivers branch, but external dependencies we ended up
  adding a few more that are also core.

  The changes are:

   - Fixes and improvements for the zoned device support (Ajay, Damien)

   - sed-opal table writing and datastore UID (Revanth)

   - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun)

   - Improvements to the block stats tracking (Pavel)

   - Fix for overruning sysfs buffer for large number of CPUs (Ming)

   - Optimization for small IO (Ming, Christoph)

   - Fix typo in RWH lifetime hint (Eugene)

   - Dead code removal and documentation (Bart)

   - Reduction in memory usage for queue and tag set (Bart)

   - Kerneldoc header documentation (André)

   - Device/partition revalidation fixes (Jan)

   - Stats tracking for flush requests (Konstantin)

   - Various other little fixes here and there (et al)"

* tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits)
  Revert "block: split bio if the only bvec's length is > SZ_4K"
  block: add iostat counters for flush requests
  block,bfq: Skip tracing hooks if possible
  block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
  blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1
  block: Don't disable interrupts in trigger_softirq()
  sbitmap: Delete sbitmap_any_bit_clear()
  blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
  block: split bio if the only bvec's length is > SZ_4K
  block: still try to split bio if the bvec crosses pages
  blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT
  blk-cgroup: reimplement basic IO stats using cgroup rstat
  blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive()
  blk-throtl: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: stop using blkg->stat_bytes and ->stat_ios
  bfq-iosched: relocate bfqg_*rwstat*() helpers
  block: add zone open, close and finish ioctl support
  block: add zone open, close and finish operations
  block: Simplify REQ_OP_ZONE_RESET_ALL handling
  block: Remove REQ_OP_ZONE_RESET plugging
  ...
2019-11-25 10:59:41 -08:00
Jens Axboe 1e279153df Revert "block: split bio if the only bvec's length is > SZ_4K"
We really don't need this, as the slow path will do the right thing
anyway.

This reverts commit 6952a7f844.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21 10:16:12 -07:00
Konstantin Khlebnikov b686631865 block: add iostat counters for flush requests
Requests that triggers flushing volatile writeback cache to disk (barriers)
have significant effect to overall performance.

Block layer has sophisticated engine for combining several flush requests
into one. But there is no statistics for actual flushes executed by disk.
Requests which trigger flushes usually are barriers - zero-size writes.

This patch adds two iostat counters into /sys/class/block/$dev/stat and
/proc/diskstats - count of completed flush requests and their total time.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-21 09:06:47 -07:00
Dmitry Monakhov 40d47c155e block,bfq: Skip tracing hooks if possible
In most cases blk_tracing is not active, but  bfq_log_bfqq macro
generate pid_str unconditionally, which result in significant overhead.

## Test
modprobe null_blk
echo bfq > /sys/block/nullb0/queue/scheduler
fio --name=t --ioengine=libaio --direct=1 --filename=/dev/nullb0 \
   --runtime=30 --time_based=1 --rw=write --iodepth=128 --bs=4k

# Results
|        | baseline | w/ patch | gain |
| iops   | 113.19K  | 126.42K  | +11% |

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-20 16:10:29 -07:00
Revanth Rajashekar c6da429ea9 block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64'
In function 'activate_lsp', rather than hard-coding the short atom
header(0x83), we need to let the function 'add_short_atom_header' append
the header based on the parameter being appended.

The parameter has been defined in Section 3.1.2.1 of
https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage-Opal_Feature_Set_Single_User_Mode_v1-00_r1-00-Final.pdf

Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-18 09:49:15 -07:00
Sebastian Andrzej Siewior de678bc63c block: Don't disable interrupts in trigger_softirq()
trigger_softirq() is always invoked as a SMP-function call which is
always invoked with disables interrupts.

Don't disable interrupt in trigger_softirq() because interrupts are
already disabled.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-18 07:29:22 -07:00
Jiufei Xue 8b37bc277f iocost: check active_list of all the ancestors in iocg_activate()
There is a bug that checking the same active_list over and over again
in iocg_activate(). The intention of the code was checking whether all
the ancestors and self have already been activated. So fix it.

Fixes: 7caa47151a ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 13:56:54 -07:00
Christoph Hellwig f0b870df80 block: remove (__)blkdev_reread_part as an exported API
In general drivers should never mess with partition tables directly.
Unfortunately s390 and loop do for somewhat historic reasons, but they
can use bdev_disk_changed directly instead when we export it as they
satisfy the sanity checks we have in __blkdev_reread_part.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>	[dasd]
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:43:59 -07:00
Christoph Hellwig 142fe8f4bb block: fix bdev_disk_changed for non-partitioned devices
We still have to set the capacity to 0 if invalidating or call
revalidate_disk if not even if the disk has no partitions.  Fix
that by merging rescan_partitions into bdev_disk_changed and just
stubbing out blk_add_partitions and blk_drop_partitions for
non-partitioned devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:43:53 -07:00
Christoph Hellwig a1548b6744 block: move rescan_partitions to fs/block_dev.c
Large parts of rescan_partitions aren't about partitions, and
moving it to block_dev.c will allow for some further cleanups by
merging it into its only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:43:21 -07:00
Christoph Hellwig 6917d06899 block: merge invalidate_partitions into rescan_partitions
A lot of the logic in invalidate_partitions and rescan_partitions is
shared.  Merge the two functions to simplify things.  There is a small
behavior change in that we now send the kevent change notice also if we
were not invalidating but no partitions were found, which seems like
the right thing to do.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:42:41 -07:00
Christoph Hellwig f902b02600 block: refactor rescan_partitions
Split out a helper that adds one single partition, and another one
calling that dealing with the parsed_partitions state.  This makes
it much more obvious how we clean up all state and start again when
using the rescan label.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:40:55 -07:00
Paolo Valente 478de3380c block, bfq: deschedule empty bfq_queues not referred by any process
Since commit 3726112ec7 ("block, bfq: re-schedule empty queues if
they deserve I/O plugging"), to prevent the service guarantees of a
bfq_queue from being violated, the bfq_queue may be left busy, i.e.,
scheduled for service, even if empty (see comments in
__bfq_bfqq_expire() for details). But, if no process will send
requests to the bfq_queue any longer, then there is no point in
keeping the bfq_queue scheduled for service.

In addition, keeping the bfq_queue scheduled for service, but with no
process reference any longer, may cause the bfq_queue to be freed when
descheduled from service. But this is assumed to never happen, and
causes a UAF if it happens. This, in turn, caused crashes [1, 2].

This commit fixes this issue by descheduling an empty bfq_queue when
it remains with not process reference.

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1767539
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205447

Fixes: 3726112ec7 ("block, bfq: re-schedule empty queues if they deserve I/O plugging")
Reported-by: Chris Evich <cevich@redhat.com>
Reported-by: Patrick Dung <patdung100@gmail.com>
Reported-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Thorsten Schubert <tschubert@bafh.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-14 07:00:54 -07:00
John Garry cb711b91a3 blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()
These functions are not referenced, so delete them.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13 12:50:38 -07:00
Christoph Hellwig d41003513e block: rework zone reporting
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:12:07 -07:00
Damien Le Moal 5eac3eb30c block: Remove partition support for zoned block devices
No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.

This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.

For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().

Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:57 -07:00
Damien Le Moal ceeb373aa6 block: Simplify report zones execution
All kernel users of blkdev_report_zones() as well as applications use
through ioctl(BLKZONEREPORT) expect to potentially get less zone
descriptors than requested. As such, the use of the internal report
zones command execution loop implemented by blk_report_zones() is
not necessary and can even be harmful to performance by causing the
execution of inefficient small zones report command to service the
reminder of a requested zone array.

This patch removes blk_report_zones(), simplifying the code. Also
remove a now incorrect comment in dm_blk_report_zones().

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier Gonzalez <javier@javigon.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:56 -07:00
Christoph Hellwig c98c3d09fc block: cleanup the !zoned case in blk_revalidate_disk_zones
blk_revalidate_disk_zones is never called for non-zoned devices.  Just
return early and warn instead of trying to handle this case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:54 -07:00
Damien Le Moal d9dd73087a block: Enhance blk_revalidate_disk_zones()
For ZBC and ZAC zoned devices, the scsi driver revalidation processing
implemented by sd_revalidate_disk() includes a call to
sd_zbc_read_zones() which executes a full disk zone report used to
check that all zones of the disk are the same size. This processing is
followed by a call to blk_revalidate_disk_zones(), used to initialize
the device request queue zone bitmaps (zone type and zone write lock
bitmaps). To do so, blk_revalidate_disk_zones() also executes a full
device zone report to obtain zone types. As a result, the entire
zoned block device revalidation process includes two full device zone
report.

By moving the zone size checks into blk_revalidate_disk_zones(), this
process can be optimized to a single full device zone report, leading to
shorter device scan and revalidation times. This patch implements this
optimization, reducing the original full device zone report implemented
in sd_zbc_check_zones() to a single, small, report zones command
execution to obtain the size of the first zone of the device. Checks
whether all zones of the device are the same size as the first zone
size are moved to the generic blk_check_zone() function called from
blk_revalidate_disk_zones().

This optimization also has the following benefits:
1) fewer memory allocations in the scsi layer during disk revalidation
   as the potentailly large buffer for zone report execution is not
   needed.
2) Implement zone checks in a generic manner, reducing the burden on
   device driver which only need to obtain the zone size and check that
   this size is a power of 2 number of LBAs. Any new type of zoned
   block device will benefit from this.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:52 -07:00
Junichi Nomura e3a5d8e386 block: check bi_size overflow before merge
__bio_try_merge_page() may merge a page to bio without bio_full() check
and cause bi_size overflow.

The overflow typically ends up with sd_init_command() warning on zero
segment request with call trace like this:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 1986 at drivers/scsi/scsi_lib.c:1025 scsi_init_io+0x156/0x180
    CPU: 2 PID: 1986 Comm: kworker/2:1H Kdump: loaded Not tainted 5.4.0-rc7 #1
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:scsi_init_io+0x156/0x180
    RSP: 0018:ffffa11487663bf0 EFLAGS: 00010246
    RAX: 00000000002be0a0 RBX: ffff8e6e9ff30118 RCX: 0000000000000000
    RDX: 00000000ffffffe1 RSI: 0000000000000000 RDI: ffff8e6e9ff30118
    RBP: ffffa11487663c18 R08: ffffa11487663d28 R09: ffff8e6e9ff30150
    R10: 0000000000000001 R11: 0000000000000000 R12: ffff8e6e9ff30000
    R13: 0000000000000001 R14: ffff8e74a1cf1800 R15: ffff8e6e9ff30000
    FS:  0000000000000000(0000) GS:ffff8e6ea7680000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fff18cf0fe8 CR3: 0000000659f0a001 CR4: 00000000001606e0
    Call Trace:
     sd_init_command+0x326/0xb40 [sd_mod]
     scsi_queue_rq+0x502/0xaa0
     ? blk_mq_get_driver_tag+0xe7/0x120
     blk_mq_dispatch_rq_list+0x256/0x5a0
     ? elv_rb_del+0x24/0x30
     ? deadline_remove_request+0x7b/0xc0
     blk_mq_do_dispatch_sched+0xa3/0x140
     blk_mq_sched_dispatch_requests+0xfb/0x170
     __blk_mq_run_hw_queue+0x81/0x130
     blk_mq_run_work_fn+0x1b/0x20
     process_one_work+0x179/0x390
     worker_thread+0x4f/0x3e0
     kthread+0x105/0x140
     ? max_active_store+0x80/0x80
     ? kthread_bind+0x20/0x20
     ret_from_fork+0x35/0x40
    ---[ end trace f9036abf5af4a4d3 ]---
    blk_update_request: I/O error, dev sdd, sector 2875552 op 0x1:(WRITE) flags 0x0 phys_seg 0 prio class 0
    XFS (sdd1): writeback error on sector 2875552

__bio_try_merge_page() should check the overflow before actually doing
merge.

Fixes: 07173c3ec2 ("block: enable multipage bvecs")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 07:26:27 -07:00
Ming Lei 6952a7f844 block: split bio if the only bvec's length is > SZ_4K
64K PAGE_SIZE is popular on ARM64 or other ARCHs, and 64K has been big
enough to break some devices probably, so change the logic to split bio
if the only bvec's length is > SZ_4K instead of PAGE_SIZE.

Fixes: fa53228721 (block: avoid blk_bio_segment_split for small I/O operations)
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08 06:59:51 -07:00
Ming Lei 59db8ba2f6 block: still try to split bio if the bvec crosses pages
Some device may set segment boundary as PAGE_SIZE - 1. If the bvec
crosses pages, and meantime its length is <= PAGE_SIZE, we still need
to split the bvec into 2 segments.

Fixes this issue by still splitting bio if the single bvec crosses
pages.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: fa53228721 (block: avoid blk_bio_segment_split for small I/O operations)
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-08 06:59:49 -07:00