- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
These two clocks are now registered in the device tree as fixed clocks,
causing a regression in the driver as the clock already exists with
e.g. the name "pxo_board" as the MSM8660 GCC driver probes.
Fix this by just not hard-coding this anymore and everything works
like a charm.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: baecbda529 ("ARM: dts: qcom: msm8660: fix node names for fixed clocks")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221013140745.7801-1-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This PLL frequency needs a UL postfix to avoid compiler warnings on
32-bit architectures.
Fixes: 184fdd873d ("clk: qcom: Add global clock controller driver for SM6375")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
gcc_parent_data_15 and gcc_parent_map_15 are not used in this driver.
Remove them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20221003211438.25691-1-konrad.dybcio@somainline.org
Fixes: 184fdd873d ("clk: qcom: Add global clock controller driver for SM6375")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the driver to parent data API. From the Documentation pll8_vote
and pxo should be declared in the DTS so fw_name can be used instead of
parent_names. .name is changed to the legacy pxo_board following how
it's declared in other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220914144743.17369-2-ansuelsmth@gmail.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use parent_hws instead of hanving parent_data with just a single .hw
entry to speed up and simplify parent lookups.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928145609.375860-3-dmitry.baryshkov@linaro.org
The USB controllers on sm6350 do not retain the state when
the system goes into low power state and the GDSCs are
turned off.
This can be observed by the USB connection not coming back alive after
putting the device into suspend, essentially breaking USB.
Fix this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928132853.179425-1-luca.weiss@fairphone.com
Since commit d399723950 ("clk: qcom: gdsc: Fix the handling of
PWRSTS_RET support) retention mode can be used on sc8280xp to maintain
state during suspend instead of leaving the domain always on.
This is needed to eventually allow the parent CX domain to be powered
down during suspend.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220929161124.18138-1-johan+linaro@kernel.org
Since commit 7eb231c337 ("PM / Domains: Convert pm_genpd_init() to
return an error code") pm_genpd_init() can return an error which the
caller must handle.
The current error handling was also incomplete as the runtime PM and
regulator use counts were not balanced in all error paths.
Add the missing error handling to the GDSC initialisation to avoid
continuing as if nothing happened on errors.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220929155816.17425-1-johan+linaro@kernel.org
The USB controllers on sc7280 do not retain the state when
the system goes into low power state and the GDSCs are
turned off. This results in the controllers reinitializing and
re-enumerating all the connected devices (resulting in additional
delay while coming out of suspend)
Fix this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
Since sc7280 only supports cx (parent of usb gdscs) Retention, there
are no cxcs offsets mentioned in order to support the Retention
state.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920111517.10407-3-quic_rjendra@quicinc.com
The USB controller on sc7180 does not retain the state when
the system goes into low power state and the GDSC is
turned off. This results in the controller reinitializing and
re-enumerating all the connected devices (resulting in additional
delay while coming out of suspend)
Fix this by updating the .pwrsts for the USB GDSC so it only
transitions to retention state in low power.
Since sc7180 only supports cx (parent of usb gdsc) Retention, there
are no cxcs offsets mentioned in order to support the Retention
state.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920111517.10407-2-quic_rjendra@quicinc.com
GDSCs cannot be transitioned into a Retention state in SW.
When either the RETAIN_MEM bit, or both the RETAIN_MEM and
RETAIN_PERIPH bits are set, and the GDSC is left ON, the HW
takes care of retaining the memory/logic for the domain when
the parent domain transitions to power collapse/power off state.
On some platforms where the parent domains lowest power state
itself is Retention, just leaving the GDSC in ON (without any
RETAIN_MEM/RETAIN_PERIPH bits being set) will also transition
it to Retention.
The existing logic handling the PWRSTS_RET seems to set the
RETAIN_MEM/RETAIN_PERIPH bits if the cxcs offsets are specified
but then explicitly turns the GDSC OFF as part of _gdsc_disable().
Fix that by leaving the GDSC in ON state.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920111517.10407-1-quic_rjendra@quicinc.com
The Snapdragon 670 uses the RPMh mailbox for most of the clocks used in
SDM845 but omits two. Add clock data for SDM670 so the driver doesn't fail
to resolve a clock.
Link: 443bd8d6e2%5E%21/#F7
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220920223734.151135-3-mailingradian@gmail.com
The qcom2260 and sm6115 GCC drivers use a common modified DEFAULT and
BRAMMO alpha pll offsets. Move these common offsets to the shared place
to avoid duplication. The new layouts have a suffix EVO similar to LUCID
and RIVIAN.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220830075620.974009-4-iskren.chernev@gmail.com
The DEFAULT and BRAMMO PLL offsets are non-standard in downstream, but
currently only BRAMMO ones are overridden. Override DEFAULT ones too.
A very similar thing is happening in gcc-qcm2290 driver.
Fixes: cbe63bfdc5 ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Adam Skladowski <a_skl39@protonmail.com>
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220830075620.974009-2-iskren.chernev@gmail.com
PLLs can be kept in standby (default configuration) or in off mode
when disabled during power collapse. Hence add support for pll
disable off mode for lucid evo PLL.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220908222850.3552050-3-dmitry.baryshkov@linaro.org
Add support for the display clock controller found in SM6115/SM4250
based devices. This clock controller feeds the Multimedia Display
SubSystem (MDSS).
This driver is based upon one submitted for QCM2290.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220911164635.182973-3-a39.skl@gmail.com
Enabling PCIe GDSC retention to ensure controller and its
dependent clocks won't go down during system suspend.
Update the .pwrsts for PCIe GDSC so it only transitions
to RET in low power.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1663669347-29308-6-git-send-email-quic_krichai@quicinc.com
Change the qcom_cc_probe_by_index() call to qcom_cc_really_probe()
to avoid remapping of memory region for index 0, which is already
being done through qcom_cc_map().
Fixes: 7c6a6641c2 ("clk: qcom: lpass: Add support for resets & external mclk for SC7280")
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@baylibre.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1663673683-7018-1-git-send-email-quic_c_skakit@quicinc.com
Add support for IPQ8074 since it uses the same PLL setup, however it uses
slightly different Alpha PLL config.
Alpha PLL config was obtained by dumping PLL registers from a running
device.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-7-robimarko@gmail.com
Convert the driver to use OF match data for providing the Alpha PLL config
per compatible.
This is required for IPQ8074 support since it uses a different Alpha PLL
config.
While we are here rename "ipq_pll_config" to "ipq6018_pll_config" to make
it clear that it is for IPQ6018 only.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-5-robimarko@gmail.com
While fixing up the driver I noticed that my IPQ8074 board was hanging
after CPUFreq switched the frequency during boot, WDT would eventually
reset it.
So mark apcs_alias0_core_clk as critical since its the clock feeding the
CPU cluster and must never be disabled.
Fixes: 5e77b4ef1b ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-3-robimarko@gmail.com
While working on IPQ8074 APSS driver it was discovered that IPQ6018 and
IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is
currently broken.
More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux
clock.
However after debugging why it was always stuck at 800Mhz, it was figured
out that its not regmap_mux compatible at all.
It is a simple mux but it uses RCG2 register layout and control bits, so
utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not
having to provide a dummy frequency table.
While we are here, use ARRAY_SIZE for number of parents.
Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards.
Fixes: 5e77b4ef1b ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com
An RCG may act as a mux that switch between 2 parents.
This is the case on IPQ6018 and IPQ8074 where the APCS core clk that feeds
the CPU cluster clock just switches between XO and the PLL that feeds it.
Add the required ops to add support for this special configuration and use
the generic mux function to determine the rate.
This way we dont have to keep a essentially dummy frequency table to use
RCG2 as a mux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-1-robimarko@gmail.com
Use ARRAY_SIZE for num_parents instead of raw number to prevent any
confusion/mistake.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724182329.9891-4-ansuelsmth@gmail.com
Convert lcc-ipq806x driver to parent_data API.
Change parent_name for pll4 to pxo_board to prepare the future to
eventually drop the double pxo board clk.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724182329.9891-3-ansuelsmth@gmail.com
Don't store pointers to parents in struct clk_cpu_8996_pmux. Instead use
clk_hw_get_parent_by_index to fetch them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-6-dmitry.baryshkov@linaro.org
Rather than telling everybody that we are using PLL as a parent (and
using ACD clock instead) properly select ACD as a pmux parent clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-5-dmitry.baryshkov@linaro.org
Switch to using devres-managed version of clk_notifier_register(). This
allows us to drop driver's remove() callback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-3-dmitry.baryshkov@linaro.org
Replace parent_names in PLLs, secondary muxes and primary muxes with
parent_data. For primary muxes there were never any *cl_pll_acd clocks,
so instead of adding them, put the primary PLLs in both PLL_INDEX and
ACD_INDEX, then make sure ACD_INDEX is always picked over PLL_INDEX when
setting parent since we always want ACD when using the primary PLLs.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: switch to parent_hws for pmux clocks]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714100351.1834711-2-dmitry.baryshkov@linaro.org
There is nothing special about the secondary muxes, unlike the
primary muxes which need some extra logic to handle ACD and
switching between primary PLL and secondary mux sources. Turn
them into clk_regmap_mux and rename cpu_clk_msm8996_mux into
cpu_clk_msm8996_pmux to make it specific to primary muxes.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-5-y.oudjana@protonmail.com
The power cluster comes before the performance cluster. Make
everything in the driver follow this order.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-4-y.oudjana@protonmail.com
This will allow for adding them to clk_parent_data arrays
in an upcoming patch.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-3-y.oudjana@protonmail.com
The parent at this index is the secondary mux, which can connect
not only to primary PLL/2 but also to XO. Rename the index to SMUX_INDEX
to better reflect the parent.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220621160621.24415-2-y.oudjana@protonmail.com
The gfx3d clock is hand-crafting its own clk_rate_request in
clk_gfx3d_determine_rate to pass to the parent of that clock.
However, since the clk_rate_request is zero'd at creation, it will have
a max_rate of 0 which will break any code depending on the clock
boundaries.
That includes the recent commit 948fb0969e ("clk: Always clamp the
rounded rate") which will clamp the rate given to clk_round_rate() to
the current clock boundaries.
For the gfx3d clock, it means that since both the min_rate and max_rate
fields are set at zero, clk_round_rate() now always return 0.
Let's initialize the min_rate and max_rate fields properly for that
clock.
Fixes: 948fb0969e ("clk: Always clamp the rounded rate")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220816112530.1837489-25-maxime@cerno.tech
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The USB PHY on MSM8909 works with the driver used on MSM8916
(phy-qcom-usb-hs.c). When turning the PHY on/off it is first reset
using the standard reset controller API. On MSM8916 the reset is
provided by the USB driver (ci_hdrc_msm_por_reset() in ci_hdrc_msm.c).
While this seems to work on MSM8909 as well, the Qualcomm Linux sources
suggest that the PHY should be reset using the GCC_USB2_HS_PHY_ONLY_BCR
register instead. In general this is easy to set up in the device tree,
thanks to the standard reset controller API.
However, to conform to the specifications of the PHY the reset signal
should be asserted for at least 10 us. This is handled correctly on
MSM8916 in ci_hdrc_msm_por_reset(), but not within the GCC driver.
Fix this by making use of the new "udelay" field of qcom_reset_map
and set a delay of ~15 us between the assertion/deassertion of the
USB PHY reset signal.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220706134132.3623415-5-stephan.gerhold@kernkonzept.com
The amount of time required between asserting and deasserting the reset
signal can vary depending on the involved hardware component. Sometimes
1 us might not be enough and a larger delay is necessary to conform to
the specifications.
Usually this is worked around in the consuming drivers, by replacing
reset_control_reset() with a sequence of reset_control_assert(), waiting
for a custom delay, followed by reset_control_deassert().
However, in some cases the driver making use of the reset is generic and
can be used with different reset controllers. In this case the reset
time requirement is better handled directly by the reset controller
driver.
Make this possible by adding an "udelay" field to the qcom_reset_map
that allows setting a different reset delay (in microseconds).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com
The Global Clock Controller (GCC) in the MSM8909 SoC provides clocks,
resets and power domains for the various hardware blocks in the SoC.
Add a driver for it to make it possible to enable additional
functionality for the SoC.
Work on this driver was originally started independently by Dominik,
I picked it up and added missing clocks/resets, as well as various
cleanup to bring it into shape for mainline.
Co-developed-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220706134132.3623415-3-stephan.gerhold@kernkonzept.com
Stephen Boyd
Linus Walleij
Konrad Dybcio
Christian Marangi
Dmitry Baryshkov
Luca Weiss
Johan Hovold
Rajendra Nayak
Bjorn Andersson
Richard Acayan
Iskren Chernev
Adam Skladowski
Adam Skladowski
Krishna chaitanya chundru
Satya Priya
Robert Marko
Yassine Oudjana
Maxime Ripard
Stephan Gerhold