While checking/updating status for tcp ses, smb ses or tcon,
we take GlobalMid_Lock. This doesn't make any sense.
Replaced it with cifs_tcp_ses_lock.
Ideally, we should take a spin lock per struct.
But since tcp ses, smb ses and tcon objects won't add up to a lot,
I think there should not be too much contention.
Also, in few other places, these are checked without locking.
Added locking for these.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With the new per-channel bitmask for reconnect, we have an option to
reconnect the tcp session associated with the channel without reconnecting
the smb session. i.e. if there are still channels to operate on, we can
continue to use the smb session and tcon.
However, there are cases where it makes sense to reconnect the smb session
even when there are active channels underneath. For example for
SMB session expiry.
With this patch, we'll have an option to do either, and use the correct
option for specific cases.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
chan_count keeps track of the total number of channels.
Since at least the primary channel will always be connected,
this value can never go below 1. Warn if that happens.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use ses->chans_need_reconnect bitmask to print the connection
status of each channel under an SMB session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We use the concept of "binding" when one of the secondary channel
is in the process of connecting/reconnecting to the server. Till this
binding process completes, and the channel is bound to an existing session,
we redirect traffic from other established channels on the binding channel,
effectively blocking all traffic till individual channels get reconnected.
With my last set of commits, we can get rid of this binding serialization.
We now have a bitmap of connection states for each channel. We will use
this bitmap instead for tracking channel status.
Having a bitmap also now enables us to keep the session alive, as long
as even a single channel underneath is alive.
Unfortunately, this also meant that we need to supply the tcp connection
info for the channel during all negotiate and session setup functions.
These changes have resulted in a slightly bigger code churn.
However, I expect perf and robustness improvements in the mchan scenario
after this change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We needed a way to identify the channels under the smb session
which are in reconnect, so that the traffic to other channels
can continue. So I replaced the bool need_reconnect with
a bitmask identifying all the channels that need reconnection
(named chans_need_reconnect). When a channel needs reconnection,
the bit corresponding to the index of the server in ses->chans
is used to set this bitmask. Checking if no channels or all
the channels need reconnect then becomes very easy.
Also wrote some helper macros for checking and setting the bits.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The pointer p is being assigned with a value that is never read. The
pointer is being re-assigned a different value inside the do-while
loop. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
mount.cifs can pass a device with multiple delimiters in it. This will
cause rename(2) to fail with ENOENT.
V2:
- Make sanitize_path more readable.
- Fix multiple delimiters between UNC and prepath.
- Avoid a memory leak if a bad user starts putting a lot of delimiters
in the path on purpose.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2031200
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11+
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We have a cyclic dependency between fscache super cookie
and root inode cookie. The super cookie relies on
tcon->resource_id, which gets populated from the root inode
number. However, fetching the root inode initializes inode
cookie as a child of super cookie, which is yet to be populated.
resource_id is only used as auxdata to check the validity of
super cookie. We can completely avoid setting resource_id to
remove the circular dependency. Since vol creation time and
vol serial numbers are used for auxdata, we should be fine.
Additionally, there will be auxiliary data check for each
inode cookie as well.
Fixes: 5bf91ef03d ("cifs: wait for tcon resource_id before getting fscache super")
CC: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Update module_put_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of module_put_and_exit are causing the current kthread to exit
so this change makes it clear what is happening. There is no
functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Warn on the lack of key exchange during NTLMSSP authentication rather
than aborting it as there are some servers that do not set it in
CHALLENGE message.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.
Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use. Also addresses minor problem found
by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals. We want to keep it alive as long as mount is active
and can be refreshed. For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.
Fixes: c88f7dcd6d ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is clearer to initialize rc at the beginning of the function.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recently, a new field got added to the smb3_fs_context struct
named server_hostname. While creating extra channels, pick up
this field from primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recent fix to maintain a nosharesock state on the
server struct caused a regression. It updated this
field in the old tcp session, and not the new one.
This caused the multichannel scenario to misbehave.
Fixes: c9f1c19cf7 (cifs: nosharesock should not share socket with future sessions)
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use new cifs_ses_mark_for_reconnect() helper to mark all session
channels for reconnect instead of duplicating it in different places.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Updates to the srv_count field are protected elsewhere
with the cifs_tcp_ses_lock spinlock. Add one missing place
(cifs_get_tcp_sesion).
CC: Shyam Prasad N <sprasad@microsoft.com>
Addresses-Coverity: 1494149 ("Data Race Condition")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is better to print debug messages outside of the chan_lock
spinlock where possible.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Addresses-Coverity: 1493854 ("Thread deadlock")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We allocate index cookies for each connection from the client.
However, we don't need this index for each channel in case of
multichannel. So making sure that we avoid creating duplicate
cookies by instantiating only for primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Today, we don't have any way to get the smb session for any
of the secondary channels. Introducing a pointer to the primary
server from server struct of any secondary channel. The value will
be NULL for the server of the primary channel. This will enable us
to get the smb session for any channel.
This will be needed for some of the changes that I'm planning
to make soon.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Introducing a new spin lock to protect all the channel related
fields in a cifs_ses struct. This lock should be taken
whenever dealing with the channel fields, and should be held
only for very short intervals which will not sleep.
Currently, all channel related fields in cifs_ses structure
are protected by session_mutex. However, this mutex is held for
long periods (sometimes while waiting for a reply from server).
This makes the codepath quite tricky to change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In cifs_get_smb_ses, if we find an existing matching session,
we should not send a negotiate request for the session if a
session reconnect is not necessary.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were calling cifs_fscache_get_super_cookie after tcon but before
we queried the info (QFS_Info) we need to initialize the cookie
properly. Also includes an additional check suggested by Paulo
to make sure we don't initialize super cookie twice.
Suggested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Ensure that share and prefix variables are set to NULL after kfree()
when looping through DFS targets in __tree_connect_dfs_target().
Also, get rid of @ref in __tree_connect_dfs_target() and just pass a
boolean to indicate whether we're handling link targets or not.
Fixes: c88f7dcd6d ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although unlikely for it to be possible for rsp to be null here,
the check is safer to add, and quiets a Coverity warning.
Addresses-Coverity: 1437501 ("Explicit Null dereference")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In dequeue_mid we can log an error while holding a spinlock,
GlobalMid_Lock. Coverity notes that the error logging
also grabs a lock so it is cleaner (and a bit safer) to
release the GlobalMid_Lock before logging the warning.
Addresses-Coverity: 1507573 ("Thread deadlock")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although unlikely to be possible for rsp to be null here,
the check is safer to add, and quiets a Coverity warning.
Addresses-Coverity: 1420428 ("Explicit null dereferenced")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although unlikely to be possible for rsp to be null here,
the check is safer to add, and quiets a Coverity warning.
Addresses-Coverity: 1418458 ("Explicit null dereferenced")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although unlikely for it to be possible for rsp to be null here,
the check is safer to add, and quiets a Coverity warning.
Addresses-Coverity: 1443909 ("Explicit Null dereference")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix warning caused by recent changes to the dfs code:
symbol 'tree_connect_dfs_target' was not declared. Should it be static?
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mounting a dfs link that has nested links was already supported at
mount(2), so make it work over reconnect as well.
Make the following case work:
* mount //root/dfs/link /mnt -o ...
- final share: /server/share
* in server settings
- change target folder of /root/dfs/link3 to /server/share2
- change target folder of /root/dfs/link2 to /root/dfs/link3
- change target folder of /root/dfs/link to /root/dfs/link2
* mount -o remount,... /mnt
- refresh all dfs referrals
- mark current connection for failover
- cifs_reconnect() reconnects to root server
- tree_connect()
* checks that /root/dfs/link2 is a link, then chase it
* checks that root/dfs/link3 is a link, then chase it
* finally tree connect to /server/share2
If the mounted share is no longer accessible and a reconnect had been
triggered, the client will retry it from both last referral
path (/root/dfs/link3) and original referral path (/root/dfs/link).
Any new referral paths found while chasing dfs links over reconnect,
it will be updated to TCP_Server_Info::leaf_fullpath, accordingly.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linux allows doing a flush/fsync on a file open for read-only,
but the protocol does not allow that. If the file passed in
on the flush is read-only try to find a writeable handle for
the same inode, if that is not possible skip sending the
fsync call to the server to avoid breaking the apps.
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Suggested-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
For smb2_compound_op, it is possible to pass a ref to
an already open file. We should be passing it whenever possible.
i.e. if a matching handle is already kept open.
If we don't do that, we will end up breaking leases for files
kept open on the same client.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With commit 506c1da44f ("cifs: use the expiry output of dns_query to
schedule next resolution") and after triggering the first reconnect,
the next async dns resolution of tcp server's hostname would be
scheduled based on dns_resolver's key expiry default, which happens to
default to 5s on most systems that use key.dns_resolver for upcall.
As per key.dns_resolver.conf(5):
default_ttl=<number>
The number of seconds to set as the expiration on a cached
record. This will be overridden if the program manages to re-
trieve TTL information along with the addresses (if, for exam-
ple, it accesses the DNS directly). The default is 5 seconds.
The value must be in the range 1 to INT_MAX.
Make the next async dns resolution no shorter than 120s as we do not
want to be upcalling too often.
Cc: stable@vger.kernel.org
Fixes: 506c1da44f ("cifs: use the expiry output of dns_query to schedule next resolution")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make two separate functions that handle dfs and non-dfs reconnect
logics since cifs_reconnect() became way too complex to handle both.
While at it, add some documentation.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert list_for_each{,_safe} to list_for_each_entry{,_safe} in
cifs_mark_tcp_ses_conns_for_reconnect() function.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Create cifs_mark_tcp_ses_conns_for_reconnect() helper to mark all
sessions and tcons for reconnect when reconnecting tcp server.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reorder the parameters in seq_printf() to correctly print header
flags.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During the ntlmssp session setup (authenticate phases)
send the client workstation info. This can make debugging easier on
servers.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Today, when a new mount is done with nosharesock, we ensure
that we don't select an existing matching session. However,
we don't mark the connection as nosharesock, which means that
those could be shared with future sessions.
Fixed it with this commit. Also printing this info in DebugData.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=ibss
-----END PGP SIGNATURE-----
Merge tag '5.16-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- reconnect fix for stable
- minor mount option fix
- debugging improvement for (TCP) connection issues
- refactoring of common code to help ksmbd
* tag '5.16-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace points for socket connection
cifs: Move SMB2_Create definitions to the shared area
cifs: Move more definitions into the shared area
cifs: move NEGOTIATE_PROTOCOL definitions out into the common area
cifs: Create a new shared file holding smb2 pdu definitions
cifs: add mount parameter tcpnodelay
cifs: To match file servers, make sure the server hostname matches
Move all SMB2_Create definitions (except contexts) into the shared area.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move SMB2_SessionSetup, SMB2_Close, SMB2_Read, SMB2_Write and
SMB2_ChangeNotify commands into smbfs_common/smb2pdu.h
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This file will contain all the definitions we need for SMB2 packets
and will follow the naming convention of MS-SMB2.PDF as closely
as possible to make it easier to cross-reference beween the definitions
and the standard.
The content of this file will mostly consist of migration of existing
definitions in the cifs/smb2.pdu.h and ksmbd/smb2pdu.h files
with some additional tweaks as the two files have diverged.
This patch introduces the new smbfs_common/smb2pdu.h file
and migrates the SMB2 header as well as TREE_CONNECT and TREE_DISCONNECT
to the shared file.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although corking and uncorking the socket (which cifs.ko already
does) should usually have the desired benefit, using the new
tcpnodelay mount option causes tcp_sock_set_nodelay() to be set
on the socket which may be useful in order to ensure that we don't
ever have cases where the network stack is waiting on sending an
SMB request until multiple SMB requests have been added to the
send queue (since this could lead to long latencies).
To enable it simply append "tcpnodelay" it to the mount options
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We generally rely on a bunch of factors to differentiate between servers.
For example, IP address, port etc.
For certain server types (like Azure), it is important to make sure
that the server hostname matches too, even if the both hostnames currently
resolve to the same IP address.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Although very unlikely that the tlink pointer would be null in this case,
get_next_mid function can in theory return null (but not an error)
so need to check for null (not for IS_ERR, which can not be returned
here).
Address warning:
fs/smbfs_client/connect.c:2392 cifs_match_super()
warn: 'tlink' isn't an ERR_PTR
Pointed out by Dan Carpenter via smatch code analysis tool
CC: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Address warning:
fs/smbfs_client/misc.c:273 header_assemble()
warn: variable dereferenced before check 'treeCon->ses->server'
Pointed out by Dan Carpenter via smatch code analysis tool
Although the check is likely unneeded, adding it makes the code
more consistent and easier to read, as the same check is
done elsewhere in the function.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Address warning:
fs/smbfs_client/smb2pdu.c:2425 create_sd_buf()
warn: struct type mismatch 'smb3_acl vs cifs_acl'
Pointed out by Dan Carpenter via smatch code analysis tool
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Clear CIFS_INO_MODIFIED_ATTR bit from inode flags after
updating mtime and ctime
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Steve French <stfrench@microsoft.com>
Deal with some warnings generated from make W=1:
(1) Add/remove/fix kerneldoc parameters descriptions.
(2) Turn cifs' rqst_page_get_length()'s banner comment into a kerneldoc
comment. It should probably be prefixed with "cifs_" though.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The problem is the mismatched types between "ctx->total_len" which is
an unsigned int, "rc" which is an int, and "ctx->rc" which is a
ssize_t. The code does:
ctx->rc = (rc == 0) ? ctx->total_len : rc;
We want "ctx->rc" to store the negative "rc" error code. But what
happens is that "rc" is type promoted to a high unsigned int and
'ctx->rc" will store the high positive value instead of a negative
value.
The fix is to change "rc" from an int to a ssize_t.
Fixes: c610c4b619 ("CIFS: Add asynchronous write support through kernel AIO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Close file immediately when lock is set.
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Below traces are observed during fsstress and system got hung.
[ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s!
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During unlink/rename instead of closing all the deferred handles
under tcon, close only handles under the requested dentry.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Correct kernel-doc comments pointed out by the
automated kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
checkpatch complains about source files with filenames (e.g. in
these cases just below the SPDX header in comments at the top of
various files in fs/cifs). It also is helpful to change this now
so will be less confusing when the parent directory is renamed
e.g. from fs/cifs to fs/smb_client (or fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cached root file was not being completely invalidated sometimes.
Reproducing:
- With a DFS share with 2 targets, one disabled and one enabled
- start some I/O on the mount
# while true; do ls /mnt/dfs; done
- at the same time, disable the enabled target and enable the disabled
one
- wait for DFS cache to expire
- on reconnect, the previous cached root handle should be invalid, but
open_cached_dir_by_dentry() will still try to use it, but throws a
use-after-free warning (kref_get())
Make smb2_close_cached_fid() invalidate all fields every time, but only
send an SMB2_close() when the entry is still valid.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The FSCTL definitions are in smbfsctl.h which should be
shared by client and server. Move the updated version of
smbfsctl.h into smbfs_common and have the client code use
it (subsequent patch will change the server to use this
common version of the header).
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As we move to common code between client and server, we have
been asked to make the names less confusing, and refer less
to "cifs" and more to words which include "smb" instead to
e.g. "smbfs" for the client (we already have "ksmbd" for the
kernel server, and "smbd" for the user space Samba daemon).
So to be more consistent in the naming of common code between
client and server and reduce the risk of merge conflicts as
more common code is added - rename "cifs_common" to
"smbfs_common" (in future releases we also will rename
the fs/cifs directory to fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add some missing defines used by ksmbd to the client
version of smbfsctl.h, and add a missing newer define
mentioned in the protocol definitions (MS-FSCC).
This will also make it easier to move to common code.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=d9f7
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French:
"Eleven cifs/smb3 client fixes:
- mostly restructuring to allow disabling less secure algorithms
(this will allow eventual removing rc4 and md4 from general use in
the kernel)
- four fixes, including two for stable
- enable r/w support with fscache and cifs.ko
I am working on a larger set of changes (the usual ... multichannel,
auth and signing improvements), but wanted to get these in earlier to
reduce chance of merge conflicts later in the merge window"
* tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not leak EDEADLK to dgetents64 for STATUS_USER_SESSION_DELETED
cifs: add cifs_common directory to MAINTAINERS file
cifs: cifs_md4 convert to SPDX identifier
cifs: create a MD4 module and switch cifs.ko to use it
cifs: fork arc4 and create a separate module for it for cifs and other users
cifs: remove support for NTLM and weaker authentication algorithms
cifs: enable fscache usage even for files opened as rw
oid_registry: Add OIDs for missing Spnego auth mechanisms to Macs
smb3: fix posix extensions mount option
cifs: fix wrong release in sess_alloc_buffer() failed path
CIFS: Fix a potencially linear read overflow
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmTZcACgkQnJ2qBz9k
QNkkmAgArW6XoF1CePds/ZaC9vfg/nk66/zVo0n+J8xXjMWAPxcKbWFfV0uWVixq
yk4lcLV47a2Mu/B/1oLNd3vrSmhwU+srWqNwOFn1nv+lP/6wJqr8oztRHn/0L9Q3
ZSRrukSejbQ6AvTL/WzTNnCjjCc2ne3Kyko6W41aU6uyJuzhSM32wbx7qlV6t54Z
iint9OrB4gM0avLohNafTUq6I+tEGzBMNwpCG/tqCmkcvDcv3rTDVAnPSCTm0Tx2
hdrYDcY/rLxo93pDBaW1rYA/fohR+mIVye6k2TjkPAL6T1x+rxeT5qnc+YijH5yF
sFPDhlD+ZsfOLi8stWXLOJ+8+gLODg==
=pDBR
-----END PGP SIGNATURE-----
Merge tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs hole punching vs cache filling race fixes from Jan Kara:
"Fix races leading to possible data corruption or stale data exposure
in multiple filesystems when hole punching races with operations such
as readahead.
This is the series I was sending for the last merge window but with
your objection fixed - now filemap_fault() has been modified to take
invalidate_lock only when we need to create new page in the page cache
and / or bring it uptodate"
* tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
filesystems/locking: fix Malformed table warning
cifs: Fix race between hole punch and page fault
ceph: Fix race between hole punch and page fault
fuse: Convert to using invalidate_lock
f2fs: Convert to using invalidate_lock
zonefs: Convert to using invalidate_lock
xfs: Convert double locking of MMAPLOCK to use VFS helpers
xfs: Convert to use invalidate_lock
xfs: Refactor xfs_isilocked()
ext2: Convert to using invalidate_lock
ext4: Convert to use mapping->invalidate_lock
mm: Add functions to lock invalidate_lock for two mappings
mm: Protect operations adding pages to page cache with invalidate_lock
documentation: Sync file_operations members with reality
mm: Fix comments mentioning i_mutex
RHBZ: 1994393
If we hit a STATUS_USER_SESSION_DELETED for the Create part in the
Create/QueryDirectory compound that starts a directory scan
we will leak EDEADLK back to userspace and surprise glibc and the application.
Pick this up initiate_cifs_search() and retry a small number of tries before we
return an error to userspace.
Cc: stable@vger.kernel.org
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MD4 support will likely be removed from the crypto directory, but
is needed for compression of NTLMSSP in SMB3 mounts.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can not drop ARC4 and basically destroy CIFS connectivity for
almost all CIFS users so create a new forked ARC4 module that CIFS and other
subsystems that have a hard dependency on ARC4 can use.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
for SMB1.
This removes the dependency to DES.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
So far, the fscache implementation we had supports only
a small set of use cases. Particularly for files opened
with O_RDONLY.
This commit enables it even for rw based file opens. It
also enables the reuse of cached data in case of mount
option (cache=singleclient) where it is guaranteed that
this is the only client (and server) which operates on
the files. There's also a single line change in fscache.c
to get around a bug seen in fscache.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were incorrectly initializing the posix extensions in the
conversion to the new mount API.
CC: <stable@vger.kernel.org> # 5.11+
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated.
Also, the strnlen() call does not avoid the read overflow in the strlcpy
function when a not NUL-terminated string is passed.
So, replace this block by a call to kstrndup() that avoids this type of
overflow and does the same.
Fixes: 066ce68994 ("cifs: rename cifs_strlcpy_to_host and make it use new functions")
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
During unlink/rename/lease break, deferred work for close is
scheduled immediately but in an asynchronous manner which might
lead to race with actual(unlink/rename) commands.
This change will schedule close synchronously which will avoid
the race conditions with other commands.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Steve French <stfrench@microsoft.com>
When rename is executed on directory which has files for which
close is deferred, then rename will fail with EACCES.
This patch will try to close all deferred files when EACCES is received
and retry rename on a directory.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Cc: stable@vger.kernel.org # 5.13
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1972502
PATH_MAX is 4096 but PAGE_SIZE can be >4096 on some architectures
such as ppc and would thus write beyond the end of the actual object.
Cc: <stable@vger.kernel.org>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Suggested-by: Brian foster <bfoster@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to follow the rule earlier that the create SD context
always be a multiple of 8. However, with the change:
cifs: refactor create_sd_buf() and and avoid corrupting the buffer
...we recompute the length, and we failed that rule.
Fixing that with this change.
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We lost parsing of backupuid in the switch to new mount API.
Add it back.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Clang detected a problem with rc possibly being unitialized
(when length is zero) in a recently added fallocate code path.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
readpage was calculating the offset of the page incorrectly
for the case of large swapcaches.
loff_t offset = (loff_t)page->index << PAGE_SHIFT;
As pointed out by Matthew Wilcox, this needs to use
page_file_offset() to calculate the offset instead.
Pages coming from the swap cache have page->index set
to their index within the swapcache, not within the backing
file. For a sufficiently large swapcache, we could have
overlapping values of page->index within the same backing file.
Suggested by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the conditional checking for out_data_len and skipping the fallocate
if it is 0. This is wrong will actually change any legitimate the fallocate
where the entire region is unallocated into a no-op.
Additionally, before allocating the range, if FALLOC_FL_KEEP_SIZE is set then
we need to clamp the length of the fallocate region as to not extend the size of the file.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 CIFSPOSIXDelFile. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711519 ("Out of bounds write")
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 CIFSPOSIXCreate. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711518 ("Out of bounds write")
Signed-off-by: Steve French <stfrench@microsoft.com>
When remouting a DFS share, force a new DFS referral of the path and
if the currently cached targets do not match any of the new targets or
there was no cached targets, then mark it for reconnect.
For example:
$ mount //dom/dfs/link /mnt -o username=foo,password=bar
$ ls /mnt
oldfile.txt
change target share of 'link' in server settings
$ mount /mnt -o remount,username=foo,password=bar
$ ls /mnt
newfile.txt
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We only allow sending single credit writes through the SMB2_write() synchronous
api so split this into smaller chunks.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reported-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make sure that we do not share tcp sessions of dfs mounts when
mounting regular shares that connect to same server. DFS connections
rely on a single instance of tcp in order to do failover properly in
cifs_reconnect().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When sending the compression context to some servers, they rejected
the SMB3.1.1 negotiate protocol because they expect the compression
context to have a data length of a multiple of 8.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We have a few ref counters srv_count, ses_count and
tc_count which we use for ref counting. Added a WARN_ON
during the decrement of each of these counters to make
sure that they don't go below their minimum values.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although it is unlikely to be have ended up with a null
session pointer calling cifs_try_adding_channels in cifs_mount.
Coverity correctly notes that we are already checking for
it earlier (when we return from do_dfs_failover), so at
a minimum to clarify the code we should make sure we also
check for it when we exit the loop so we don't end up calling
cifs_try_adding_channels or mount_setup_tlink with a null
ses pointer.
Addresses-Coverity: 1505608 ("Derefernce after null check")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When there is no cached DFS referral of tcon->dfs_path, then reconnect
to same share.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Because the out of range assignment to bit fields
are compiler-dependant, the fields could have wrong
value.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213565
cruid should only be used for the initial mount and after this we should use the current
users credentials.
Ignore the original cruid mount argument when creating a new context for a multiuser mount
following a DFS link.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11+
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We recently fixed DNS resolution of the server hostname during reconnect.
However, server IP address may change, even when the old one continues
to server (although sub-optimally).
We should schedule the next DNS resolution based on the TTL of
the DNS record used for the last resolution. This way, we resolve the
server hostname again when a DNS record expires.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Steve French <stfrench@microsoft.com>
Cifs has a following race between hole punching and page fault:
CPU1 CPU2
smb3_fallocate()
smb3_punch_hole()
truncate_pagecache_range()
filemap_fault()
- loads old data into the
page cache
SMB2_ioctl(..., FSCTL_SET_ZERO_DATA, ...)
And now we have stale data in the page cache. Fix the problem by locking
out faults (as well as reads) using mapping->invalidate_lock while hole
punch is running.
CC: Steve French <sfrench@samba.org>
CC: linux-cifs@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().
Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Support for faster packet signing (using GMAC instead of CMAC) can
now be negotiated to some newer servers, including Windows.
See MS-SMB2 section 2.2.3.17.
This patch adds support for sending the new negotiate context
with the first of three supported signing algorithms (AES-CMAC)
and decoding the response. A followon patch will add support
for sending the other two (including AES-GMAC, which is fastest)
and changing the signing algorithm used based on what was
negotiated.
To allow the client to request GMAC signing set module parameter
"enable_negotiate_signing" to 1.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use the nice helpers to initialize and the uid/gid/cred_uid when passed as mount arguments.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 PosixLock. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711520 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 RenameOpenFile. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711521 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 SetFileDisposition (which is used to
unlink a file by setting the delete on close flag). This
changeset doesn't change the address but makes it slightly
clearer.
Addresses-Coverity: 711524 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the header
structure rather than from the beginning of the struct plus
4 bytes) for setting the file size using SMB1. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711525 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although it compiles, the test robot correctly noted:
'cifsacl.h' file not found with <angled> include; use "quotes" instead
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for doing SetPathInfo (setattr) when using the Unix
extensions. This doesn't change the address but makes it
slightly clearer.
Addresses-Coverity: 711528 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for creating SMB1 symlinks when using the Unix
extensions. This doesn't change the address but
makes it slightly clearer.
Addresses-Coverity: 711530 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes). This doesn't change the address but
makes it slightly clearer.
Addresses-Coverity: 711529 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were three places where we were not taking the spinlock
around updates to server->tcpStatus when it was being modified.
To be consistent (also removes Coverity warning) and to remove
possibility of race best to lock all places where it is updated.
Two of the three were in initialization of the field and can't
race - but added lock around the other.
Addresses-Coverity: 1399512 ("Data race condition")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
There was one place where we weren't locking CurrentMid, and although
likely to be safe since even without the lock since it is during
negotiate protocol, it is more consistent to lock it in this last remaining
place, and avoids confusing Coverity warning.
Addresses-Coverity: 1486665 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
In the other places where we update ses->status we protect the
updates via GlobalMid_Lock. So to be consistent add the same
locking around it in cifs_put_smb_ses where it was missing.
Addresses-Coverity: 1268904 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
We weren't checking if tcon is null before setting dfs path,
although we check for null tcon in an earlier assignment statement.
Addresses-Coverity: 1476411 ("Dereference after null check")
Signed-off-by: Steve French <stfrench@microsoft.com>
dacl_ptr can be null so we must check for it everywhere it is
used in build_sec_desc.
Addresses-Coverity: 1475598 ("Explicit null dereference")
Signed-off-by: Steve French <stfrench@microsoft.com>
in cifs_do_create we check if newinode is valid before referencing it
but are missing the check in one place in fs/cifs/dir.c
Addresses-Coverity: 1357292 ("Dereference after null check")
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In both these cases sid_to_id unconditionally returned success, and
used the default uid/gid for the mount, so setting rc is confusing
and simply gets overwritten (set to 0) later in the function.
Addresses-Coverity: 1491672 ("Unused value")
Signed-off-by: Steve French <stfrench@microsoft.com>
The recently updated MS-SMB2 (June 2021) added protocol definitions
for a new level 60 for query directory (FileIdExtdDirectoryInformation).
Signed-off-by: Steve French <stfrench@microsoft.com>
This code sets "ses" to NULL which will lead to a NULL dereference on
the second iteration through the loop.
Fixes: 85346c17e425 ("cifs: convert list_for_each to entry variant in smb2misc.c")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were two places where we weren't checking for error
(e.g. ERESTARTSYS) while waiting for rdma resolution.
Addresses-Coverity: 1462165 ("Unchecked return value")
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring fields.
Instead of using memcpy to read across multiple struct members, just
perform per-member assignments as already done for other members.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although we may need this in some cases in the future, remove the
currently unused, non-compounded version of POSIX query info,
SMB11_posix_query_info (instead smb311_posix_query_path_info is now
called e.g. when revalidating dentries or retrieving info for getattr)
Addresses-Coverity: 1495708 ("Resource leaks")
Signed-off-by: Steve French <stfrench@microsoft.com>
We were trying to fill in uninitialized file attributes in the error case.
Addresses-Coverity: 139689 ("Uninitialized variables")
Signed-off-by: Steve French <stfrench@microsoft.com>
Although in practice this can not occur (since IPv4 and IPv6 are the
only two cases currently supported), it is cleaner to avoid uninitialized
variable warnings.
Addresses smatch warning:
fs/cifs/cifs_swn.c:468 cifs_swn_store_swn_addr() error: uninitialized symbol 'port'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
CC: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
tcon can not be null in SMB2_tcon function so the check
is not relevant and removing it makes Coverity happy.
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Addresses-Coverity: 13250131 ("Dereference before null check")
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SPDX license identifier and replace license boilerplate.
Corrects various checkpatch errors with the older format for
noting the LGPL license.
Signed-off-by: Steve French <stfrench@microsoft.com>
convert list_for_each() to list_for_each_entry() where
applicable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
convert list_for_each() to list_for_each_entry() where
applicable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In posix_info_parse() we call posix_info_sid_size twice for each of the owner and the group
sid. The first time to check that it is valid, i.e. >= 0 and the second time
to just pass it in as a length to memcpy().
As this is a pure function we know that it can not be negative the second time and this
is technically a false warning in coverity.
However, as it is a pure function we are just wasting cycles by calling it a second time.
Record the length from the first time we call it and save some cycles as well as make
Coverity happy.
Addresses-Coverity-ID: 1491379 ("Argument can not be negative")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
According to the investigation performed by Jacob Shivers at Red Hat,
cifs_lookup and cifs_readdir leak EAGAIN when the user session is
deleted on the server. Fix this issue by implementing a retry with
limits, as is implemented in cifs_revalidate_dentry_attr.
Reproducer based on the work by Jacob Shivers:
~~~
$ cat readdir-cifs-test.sh
#!/bin/bash
# Install and configure powershell and sshd on the windows
# server as descibed in
# https://docs.microsoft.com/en-us/windows-server/administration/openssh/openssh_overview
# This script uses expect(1)
USER=dude
SERVER=192.168.0.2
RPATH=root
PASS='password'
function debug_funcs {
for line in $@ ; do
echo "func $line +p" > /sys/kernel/debug/dynamic_debug/control
done
}
function setup {
echo 1 > /proc/fs/cifs/cifsFYI
debug_funcs wait_for_compound_request \
smb2_query_dir_first cifs_readdir \
compound_send_recv cifs_reconnect_tcon \
generic_ip_connect cifs_reconnect \
smb2_reconnect_server smb2_reconnect \
cifs_readv_from_socket cifs_readv_receive
tcpdump -i eth0 -w cifs.pcap host 192.168.2.182 & sleep 5
dmesg -C
}
function test_call {
if [[ $1 == 1 ]] ; then
tracer="strace -tt -f -s 4096 -o trace-$(date -Iseconds).txt"
fi
# Change the command here to anything appropriate
$tracer ls $2 > /dev/null
res=$?
if [[ $1 == 1 ]] ; then
if [[ $res == 0 ]] ; then
1>&2 echo success
else
1>&2 echo "failure ($res)"
fi
fi
}
mountpoint /mnt > /dev/null || mount -t cifs -o username=$USER,pass=$PASS //$SERVER/$RPATH /mnt
test_call 0 /mnt/
/usr/bin/expect << EOF
set timeout 60
spawn ssh $USER@$SERVER
expect "yes/no" {
send "yes\r"
expect "*?assword" { send "$PASS\r" }
} "*?assword" { send "$PASS\r" }
expect ">" { send "powershell close-smbsession -force\r" }
expect ">" { send "exit\r" }
expect eof
EOF
sysctl -w vm.drop_caches=2 > /dev/null
sysctl -w vm.drop_caches=2 > /dev/null
setup
test_call 1 /mnt/
~~~
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Interlink is a special type of DFS link that resolves to a different
DFS domain-based namespace. To determine whether it is an interlink
or not, check if ReferralServers and StorageServers bits are set to 1
and 0 respectively in ReferralHeaderFlags, as specified in MS-DFSC
3.1.5.4.5 Determining Whether a Referral Response is an Interlink.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Decode negTokenInit with lib/asn1_decoder. For that,
add OIDs in linux/oid_registry.h and a negTokenInit
ASN1 file, "spnego_negtokeninit.asn1".
And define decoder's callback functions, which
are the gssapi_this_mech for checking SPENGO oid and
the neg_token_init_mech_type for getting authentication
mechanisms supported by a server.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When refreshing the DFS cache, keep SMB2 IOCTL calls as much outside
critical sections as possible and avoid read/write starvation when
getting new DFS referrals by using broken or slow connections.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When we lookup an smb session based on session id,
we did not up the ref-count for the session. This can
potentially cause issues if the session is freed from under us.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
It isn't enough to have unshared tcons because multiple DFS mounts can
connect to same target server and failover to different servers, so we
can't use a single tcp server for such cases.
For the simplest solution, use nosharesock option to achieve that.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We don't want to refresh the dfs cache in very short intervals, so
setting a minimum interval of 2 minutes is OK.
If it needs to be refreshed immediately, one could have the cache
cleared with
$ echo 0 > /proc/fs/cifs/dfscache
and then remounting the dfs share.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix cache lookup and hash calculations when handling paths with
different cases.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert all dfs paths to dfs cache's local codepage (@cache_cp) and
avoid mixing them with different charsets.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
At every mount, keep all sessions alive that were used for chasing the
DFS referrals as long as the dfs mounts are active.
Use those sessions in DFS cache to refresh all active tcons as well as
cached entries. They will be managed by a list of mount_group
structures that will be indexed by a randomly generated uuid at mount
time, so we can put all the sessions related to specific dfs mounts
and avoid leaking them.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
@noreq param isn't used anywhere, so just remove it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On session close, the IPC is closed and the server must release all
tcons of the session. It doesn't matter if we send a ipc close or
not.
Besides, it will make the server to not close durable and resilient
files on session close, as specified in MS-SMB2 3.3.5.6 Receiving an
SMB2 LOGOFF Request.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1866684
We don't have a real fallocate in the SMB2 protocol so we used to emulate fallocate
by simply switching the file to become non-sparse. But as that could potantially consume
a lot more data than we intended to fallocate (large sparse file and fallocating a thin
slice in the middle) we would only do this IFF the fallocate request was for virtually
the entire file.
This patch improves this and starts allowing us to fallocate smaller chunks of a file by
overwriting the region with 0, for the parts that are unallocated.
The method used is to first query the server for FSCTL_QUERY_ALLOCATED_RANGES to find what
is unallocated in the fallocate range and then to only overwrite-with-zero the unallocated
ranges to fill in the holes.
As overwriting-with-zero is different from just allocating blocks, and potentially much
more expensive, we limit this to only allow fallocate ranges up to 1Mb in size.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add description for `cifs_compose_mount_options` to fix the W=1 warnings:
fs/cifs/cifs_dfs_ref.c:139: warning: Function parameter or
member 'devname' not described in 'cifs_compose_mount_options'
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The variable rc is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The only usage of cifs_genl_ops[] is to assign its address to the ops
field in the genl_family struct, which is a pointer to const. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
is_sysvol_or_netlogon() is never used, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use %pI6 for IPv6 addresses
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We missed using the variable length string macros in several
tracepoints. Fixed them in this change.
There's probably more useful macros that we can use to print
others like flags etc. But I'll submit sepawrate patches for
those at a future date.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.12
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3.0 doesn't have encryption negotiate context but simply uses
the SMB2_GLOBAL_CAP_ENCRYPTION flag.
When that flag is present in the neg response cifs.ko uses AES-128-CCM
which is the only cipher available in this context.
cipher_type was set to the server cipher only when parsing encryption
negotiate context (SMB3.1.1).
For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1
for AES-128-CCM.
Fix this by checking for SMB3.0 and encryption capability and setting
cipher_type appropriately.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When smb2 lease parameter is disabled on server. Server grants
batch oplock instead of RHW lease by default on open, inode page cache
needs to be zapped immediatley upon close as cache is not valid.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Removed oplock_break_received flag which was added to achieve
synchronization between oplock handler and open handler by earlier commit.
It is not needed because there is an existing lock open_file_lock to achieve
the same. find_readable_file takes open_file_lock and then traverses the
openFileList. Similarly, cifs_oplock_break while closing the deferred
handle (i.e cifsFileInfo_put) takes open_file_lock and then sends close
to the server.
Added comments for better readability.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.
Fixes: 9bf0c9cd43 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to
0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting
it incorrectly).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Deadstore detected by Lukas Bulwahn's CodeChecker Tool (ELISA group).
line 741 struct cifsInodeInfo *cinode;
line 747 cinode = CIFS_I(d_inode(cfile->dentry));
could be deleted.
cinode on filesystem should not be deleted when files are closed,
they are representations of some data fields on a physical disk,
thus no further action is required.
The virtual inode on vfs will be handled by vfs automatically,
and the denotation is inode, which is different from the cinode.
Signed-off-by: wenhuizhang <wenhui@gwmail.gwu.edu>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.
See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to
advertise CAP_MULTICHANNEL capability when establishing multiple
channels has been requested by the user doing the mount. See MS-SMB2
sections 2.2.3 and 3.2.5.2
Without setting it there is some risk that multichannel could fail
if the server interpreted the field strictly.
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=BFOj
-----END PGP SIGNATURE-----
Merge tag '5.13-rc-smb3-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Ten CIFS/SMB3 changes - including two marked for stable - including
some important multichannel fixes, as well as support for handle
leases (deferred close) and shutdown support:
- some important multichannel fixes
- support for handle leases (deferred close)
- shutdown support (which is also helpful since it enables multiple
xfstests)
- enable negotiating stronger encryption by default (GCM256)
- improve wireshark debugging by allowing more options for root to
dump decryption keys
SambaXP and the SMB3 Plugfest test event are going on now so I am
expecting more patches over the next few days due to extra testing
(including more multichannel fixes)"
* tag '5.13-rc-smb3-part2' of git://git.samba.org/sfrench/cifs-2.6:
fs/cifs: Fix resource leak
Cifs: Fix kernel oops caused by deferred close for files.
cifs: fix regression when mounting shares with prefix paths
cifs: use echo_interval even when connection not ready.
cifs: detect dead connections only when echoes are enabled.
smb3.1.1: allow dumping keys for multiuser mounts
smb3.1.1: allow dumping GCM256 keys to improve debugging of encrypted shares
cifs: add shutdown support
cifs: Deferred close for files
smb3.1.1: enable negotiating stronger encryption by default
The -EIO error return path is leaking memory allocated
to page. Fix this by moving the allocation block after
the check of cifs_forced_shutdown.
Addresses-Coverity: ("Resource leak")
Fixes: 087f757b01 ("cifs: add shutdown support")
Signed-off-by: Khaled ROMDHANI <khaledromdhani216@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix regression issue caused by deferred close for files.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The commit 315db9a05b ("cifs: fix leak in cifs_smb3_do_mount() ctx")
revealed an existing bug when mounting shares that contain a prefix
path or DFS links.
cifs_setup_volume_info() requires the @devname to contain the full
path (UNC + prefix) to update the fs context with the new UNC and
prepath values, however we were passing only the UNC
path (old_ctx->UNC) in @device thus discarding any prefix paths.
Instead of concatenating both old_ctx->{UNC,prepath} and pass it in
@devname, just keep the dup'ed values of UNC and prepath in
cifs_sb->ctx after calling smb3_fs_context_dup(), and fix
smb3_parse_devname() to correctly parse and not leak the new UNC and
prefix paths.
Cc: <stable@vger.kernel.org> # v5.11+
Fixes: 315db9a05b ("cifs: fix leak in cifs_smb3_do_mount() ctx")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the tcp connection is not ready to send requests,
we keep retrying echo with an interval of zero.
This seems unnecessary, and this fix changes the interval
between echoes to what is specified as echo_interval.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can detect server unresponsiveness only if echoes are enabled.
Echoes can be disabled under two scenarios:
1. The connection is low on credits, so we've disabled echoes/oplocks.
2. The connection has not seen any request till now (other than
negotiate/sess-setup), which is when we enable these two, based on
the credits available.
So this fix will check for dead connection, only when echo is enabled.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
CC: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
When mounted multiuser it is hard to dump keys for the other sessions
which makes it hard to debug using network traces (e.g. using wireshark).
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Previously we were only able to dump CCM or GCM-128 keys (see "smbinfo keys" e.g.)
to allow network debugging (e.g. wireshark) of mounts to SMB3.1.1 encrypted
shares. But with the addition of GCM-256 support, we have to be able to dump
32 byte instead of 16 byte keys which requires adding an additional ioctl
for that.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Various filesystem support the shutdown ioctl which is used by various
xfstests. The shutdown ioctl sets a flag on the superblock which
prevents open, unlink, symlink, hardlink, rmdir, create etc.
on the file system until unmount and remounted. The two flags supported
in this patch are:
FSOP_GOING_FLAGS_LOGFLUSH and FSOP_GOING_FLAGS_NOLOGFLUSH
which require very little other than blocking new operations (since
we do not cache writes to metadata on the client with cifs.ko).
FSOP_GOING_FLAGS_DEFAULT is not supported yet, but could be added in
the future but would need to call syncfs or equivalent to write out
pending data on the mount.
With this patch various xfstests now work including tests 043 through
046 for example.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
When file is closed, SMB2 close request is not sent to server
immediately and is deferred for acregmax defined interval. When file is
reopened by same process for read or write, the file handle
is reused if an oplock is held.
When client receives a oplock/lease break, file is closed immediately
if reference count is zero, else oplock is downgraded.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that stronger encryption (gcm256) has been more broadly
tested, and confirmed to work with multiple servers (Windows
and Azure for example), enable it by default. Although gcm256 is
the second choice we offer (after gcm128 which should be faster),
this change allows mounts to server which are configured to
require the strongest encryption to work (without changing a module
load parameter).
Signed-off-by: Steve French <stfrench@microsoft.com>
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Pull vfs inode type handling updates from Al Viro:
"We should never change the type bits of ->i_mode or the method tables
(->i_op and ->i_fop) of a live inode.
Unfortunately, not all filesystems took care to prevent that"
* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spufs: fix bogosity in S_ISGID handling
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
openpromfs: don't do unlock_new_inode() until the new inode is set up
hostfs_mknod(): don't bother with init_special_inode()
cifs: have cifs_fattr_to_inode() refuse to change type on live inode
cifs: have ->mkdir() handle race with another client sanely
do_cifs_create(): don't set ->i_mode of something we had not created
gfs2: be careful with inode refresh
ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
vboxsf: don't allow to change the inode type
afs: Fix updating of i_mode due to 3rd party change
ceph: don't allow type or device number to change on non-I_NEW inodes
ceph: fix up error handling with snapdirs
new helper: inode_wrong_type()
In some cases readahead of more than the read size can help
(to allow parallel i/o of read ahead which can improve performance).
Ceph introduced a mount parameter "rasize" to allow controlling this.
Add mount parameter "rasize" to allow control of amount of readahead
requested of the server. If rasize not set, rasize defaults to
negotiated rsize as before.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For servers which don't support copy_range (SMB3 CopyChunk), the
logging of:
CIFS: VFS: \\server\share refcpy ioctl error -95 getting resume key
can fill the client logs and make debugging real problems more
difficult. Change the -EOPNOTSUPP on copy_range to a "warn once"
Signed-off-by: Steve French <stfrench@microsoft.com>
pfid is being set to tcon->crfid.fid and they are copied in each other
multiple times. Remove the memcopy between same pointers - memory
locations.
Addresses-Coverity: ("Overlapped copy")
Fixes: 9e81e8ff74 ("cifs: return cached_fid from open_shroot")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If smb3_notify() is called at mount point of CIFS, build_path_from_dentry()
returns the pointer to kmalloc-ed memory with terminating zero (this is
empty FileName to be passed to SMB2 CREATE request). This pointer is assigned
to the `path` variable.
Then `path + 1` (to skip first backslash symbol) is passed to
cifs_convert_path_to_utf16(). This is incorrect for empty path and causes
out-of-bound memory access.
Get rid of this "increase by one". cifs_convert_path_to_utf16() already
contains the check for leading backslash in the path.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212693
CC: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
* rqst[1,2,3] is allocated in vars
* each rqst->rq_iov is also allocated in vars or using pooled memory
SMB2_open_free, SMB2_ioctl_free, SMB2_query_info_free are iterating on
each rqst after vars has been freed (use-after-free), and they are
freeing the kvec a second time (double-free).
How to trigger:
* compile with KASAN
* mount a share
$ smbinfo quota /mnt/foo
Segmentation fault
$ dmesg
==================================================================
BUG: KASAN: use-after-free in SMB2_open_free+0x1c/0xa0
Read of size 8 at addr ffff888007b10c00 by task python3/1200
CPU: 2 PID: 1200 Comm: python3 Not tainted 5.12.0-rc6+ #107
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x93/0xc2
print_address_description.constprop.0+0x18/0x130
? SMB2_open_free+0x1c/0xa0
? SMB2_open_free+0x1c/0xa0
kasan_report.cold+0x7f/0x111
? smb2_ioctl_query_info+0x240/0x990
? SMB2_open_free+0x1c/0xa0
SMB2_open_free+0x1c/0xa0
smb2_ioctl_query_info+0x2bf/0x990
? smb2_query_reparse_tag+0x600/0x600
? cifs_mapchar+0x250/0x250
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_strndup_to_utf16+0x12c/0x1c0
? rwlock_bug.part.0+0x60/0x60
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_convert_path_to_utf16+0xf8/0x140
? smb2_check_message+0x6f0/0x6f0
cifs_ioctl+0xf18/0x16b0
? smb2_query_reparse_tag+0x600/0x600
? cifs_readdir+0x1800/0x1800
? selinux_bprm_creds_for_exec+0x4d0/0x4d0
? do_user_addr_fault+0x30b/0x950
? __x64_sys_openat+0xce/0x140
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdcf1f4ba87
Code: b3 66 90 48 8b 05 11 14 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 13 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffef1ce7748 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000c018cf07 RCX: 00007fdcf1f4ba87
RDX: 0000564c467c5590 RSI: 00000000c018cf07 RDI: 0000000000000003
RBP: 00007ffef1ce7770 R08: 00007ffef1ce7420 R09: 00007fdcf0e0562b
R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000004018
R13: 0000000000000001 R14: 0000000000000003 R15: 0000564c467c5590
Allocated by task 1200:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7a/0x90
smb2_ioctl_query_info+0x10e/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 1200:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xe5/0x110
slab_free_freelist_hook+0x53/0x130
kfree+0xcc/0x320
smb2_ioctl_query_info+0x2ad/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888007b10c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes inside of
512-byte region [ffff888007b10c00, ffff888007b10e00)
The buggy address belongs to the page:
page:0000000044e14b75 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7b10
head:0000000044e14b75 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffffea000015f500 0000000400000004 ffff888001042c80
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888007b10b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888007b10b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888007b10c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888007b10c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888007b10d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Can aid in making mount problems easier to diagnose
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This makes the errors accessible from userspace via dmesg and
the fs_context fd.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add fs_context param to parsing helpers to be able to log into it in
next patch.
Make some helper static as they are not used outside of fs_context.c
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This new helper will be used in the fs_context mount option parsing
code. It log errors both in:
* the fs_context log queue for userspace to read
* kernel printk buffer (dmesg, old behaviour)
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Emulated via server side copy and setsize for
SMB3 and later. In the future we could compound
this (and/or optionally use DUPLICATE_EXTENTS
if supported by the server).
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Emulated for SMB3 and later via server side copy
and setsize. Eventually this could be compounded.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Needed for the final patch in the directory caching series
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
and clear the timestamp when we receive a lease break.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Needed for subsequent patches in the directory caching
series.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to hold both a reference for the root/superblock as well as the directory that we
are caching. We need to drop these references before we call kill_anon_sb().
At this point, the root and the cached dentries are always the same but this will change
once we start caching other directories as well.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
And use this to only allow to take out a shared handle once the mount has completed and the
sb becomes available.
This will become important in follow up patches where we will start holding a reference to the
directory dentry for the shared handle during the lifetime of the handle.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
These functions will eventually be used to cache any directory, not just the root
so change the names.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move the check for the directory path into the open_shroot() function
but still fail for any non-root directories.
This is preparation for later when we will start using the cache also
for other directories than the root.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N
David Howells
Colin Ian King
Thiago Rafael Becker
Eric W. Biederman
Paulo Alcantara
Steve French
Linus Torvalds
Ronnie Sahlberg
Jens Axboe
Dan Carpenter
Rohith Surabattula
Enzo Matsumiya
Ding Hui
Len Baker
Hyunchul Lee
Jan Kara
Kees Cook
Baokun Li
Colin Ian King
Rikard Falkeborn
YueHaibing
Aurelien Aptel
Jiapeng Chong
wenhuizhang
Khaled ROMDHANI
David Disseldorp
Muhammad Usama Anjum
Paul Aurich
Eugene Korenevsky