Граф коммитов

14 Коммитов

Автор SHA1 Сообщение Дата
Nobuhiro Iwamatsu aeedfe7f89 rtc: rx8010: Fix return code for rx8010_probe
In the current code, the return value of devm_request_threaded_irq may be
returned. This fixes it.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20191217121231.2698817-2-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:16:23 +01:00
Alexandre Belloni 8049c11399 rtc: rx8010: return meaningful value for RTC_VL_READ
RX8010_FLAG_VLF means the voltage dropped too low and data has been lost.

Link: https://lore.kernel.org/r/20191214220259.621996-18-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:45 +01:00
Alexandre Belloni 894b043200 rtc: rx8010: remove RTC_VL_CLR handling
Remove RTC_VL_CLR handling because it is a disservice to userspace as it
removes the important information that the RTC data is invalid. This may
lead userspace to set an invalid system time later on.

Link: https://lore.kernel.org/r/20191214220259.621996-17-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:44 +01:00
Linus Torvalds edafb6fe42 RTC for 5.3
Drivers:
  - ds1307: properly handle oscillator failure flags
  - imx-sc: alarm support
  - pcf2123: alarm support, correct offset handling
  - sun6i: add R40 support
  - simplify getting the adapter of an i2c client
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl0tl5UACgkQ2wIijOdR
 NOVMig/8C7o1tBpm1Kfs3GYjZ5o2SI7m6425OypONOa9U2rFVnFHxVogtIHTC7wa
 SXVFdV+L/MT/xHEbQ3Mfv36cRB0h3Q89NqcVWFkjSGvoqliTIA2F2zsLDHYLDyEO
 AdOc8ztzrTCmlPjrg7d64qxA/l/dPChIhDW1nsMTJY7EXO0lBywcEP0KQsnOrjzD
 lNDskhLuYaL0h1OL2KSrx/81ZZW1MXEyTU5nl4e2JowVYFB0f75P7h79MChmjM35
 wE5WVDH8LqhYHOoVR9fW5sjRpNgdKfFsH8Sh5DGVU3jLGA72v0Eo/c1BHHegumoI
 6X+09nv9D3j4l2z5on5TzXMhvwuLdZQ2VRBdpI1XcVjtYA18UTIXZA8wDRgLTb3b
 MZE31s1WM0vxSiGyaL+hfI9APfX0xSd+BIqVvxhUVPvCGCwWvfLJgQfmlsW4eWOk
 LdmifkLb0Mjf+ym+WH8GvXND+ZeNJ9eUUwVZkGHPhb6SfkLiEAnw3f1czOT1fLDR
 q6i0hG9/+BsiwZMCJt86rDZd1D51FjkNzUH1d///iURvaDhoi41nKaFR45kc5Foc
 WVmnWDWw1yg7K6kUQ3kXsyBkbw0jhdCXGN539rrvbElyL5e5XDUo+3gAEi25CkVe
 DCpxICWO+jvOrjJBHdH3T3HJDa7NbFXWkXOwLXe5M42q7rrgZwY=
 =aJ54
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A quiet cycle this time.

   - ds1307: properly handle oscillator failure flags

   - imx-sc: alarm support

   - pcf2123: alarm support, correct offset handling

   - sun6i: add R40 support

   - simplify getting the adapter of an i2c client"

* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
  rtc: wm831x: Add IRQF_ONESHOT flag
  rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
  rtc: pcf2123: Fix build error
  rtc: interface: Change type of 'count' from int to u64
  rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
  rtc: pcf8563: Fix interrupt trigger method
  rtc: pcf2123: fix negative offset rounding
  rtc: pcf2123: add alarm support
  rtc: pcf2123: use %ptR
  rtc: pcf2123: port to regmap
  rtc: pcf2123: remove sysfs register view
  rtc: rx8025: simplify getting the adapter of a client
  rtc: rx8010: simplify getting the adapter of a client
  rtc: rv8803: simplify getting the adapter of a client
  rtc: m41t80: simplify getting the adapter of a client
  rtc: fm3130: simplify getting the adapter of a client
  rtc: tegra: Drop MODULE_ALIAS
  rtc: sun6i: Add R40 compatible
  dt-bindings: rtc: sun6i: Add the R40 RTC compatible
  dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
  ...
2019-07-17 10:03:50 -07:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Wolfram Sang 9d085c5420 rtc: rx8010: simplify getting the adapter of a client
We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-09 16:48:08 +02:00
Alexandre Belloni 22652ba724 rtc: stop validating rtc_time in .read_time
The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it just before returning from the callback.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02 10:09:58 +01:00
Akshay Bhat 804a6cfeb5 rtc: rx8010: Fix for incorrect return value
The err variable is not being reset after a successful read. Explicitly
return 0 at the end of function call to account for all return paths.

Reported-by: Jens-Peter Oswald <oswald@lre.de>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-09 01:16:35 +01:00
Akshay Bhat abf57f73ef rtc: rx8010: Specify correct address for RX8010_RESV31
Define for reserved register 31 had the incorrect address. Specify
the correct address.

Reported-by: Jens-Peter Oswald <oswald@lre.de>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08 07:52:25 +01:00
Akshay Bhat e0b6576fcd rtc: rx8010: Remove duplicate define
Remove duplicate define for RX8010_YEAR

Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08 07:52:25 +01:00
Javier Martinez Canillas 81b779ce5f rtc: rx8010: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:21 +01:00
Fabien Lahoudere 666b5d1e9f rtc: rx8010: change lock mechanism
Remove spinlock and use the "rtc->ops_lock" from RTC subsystem instead.
spin_lock_irqsave() is not needed here because we do not have hard IRQs.

This patch fixes the following issue:

root@GE004097290448 b850v3:~# hwclock --systohc
root@GE004097290448 b850v3:~# hwclock --systohc
root@GE004097290448 b850v3:~# hwclock --systohc
root@GE004097290448 b850v3:~# hwclock --systohc
root@GE004097290448 b850v3:~# hwclock --systohc
[   82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855
[   82.113660]  lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1
[   82.121329] CPU: 0 PID: 855 Comm: hwclock Not tainted 4.8.0-00042-g09d5410-dirty #20
[   82.129078] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[   82.135609] Backtrace:
[   82.138090] [<8010d378>] (dump_backtrace) from [<8010d5c0>] (show_stack+0x20/0x24)
[   82.145664]  r7:ec936000 r6:600a0013 r5:00000000 r4:81031680
[   82.151402] [<8010d5a0>] (show_stack) from [<80401518>] (dump_stack+0xb4/0xe8)
[   82.158636] [<80401464>] (dump_stack) from [<8017b8b0>] (spin_dump+0x84/0xcc)
[   82.165775]  r10:00000000 r9:ec936000 r8:81056090 r7:600a0013 r6:edb4899c r5:edb4899c
[   82.173691]  r4:e5033e00 r3:00000000
[   82.177308] [<8017b82c>] (spin_dump) from [<8017bcb0>] (do_raw_spin_unlock+0x108/0x130)
[   82.185314]  r5:edb4899c r4:edb4899c
[   82.188938] [<8017bba8>] (do_raw_spin_unlock) from [<8094b93c>] (_raw_spin_unlock_irqrestore+0x34/0x54)
[   82.198333]  r5:edb4899c r4:600a0013
[   82.201953] [<8094b908>] (_raw_spin_unlock_irqrestore) from [<8065b090>] (rx8010_set_time+0x14c/0x188)
[   82.211261]  r5:00000020 r4:edb48990
[   82.214882] [<8065af44>] (rx8010_set_time) from [<80653fe4>] (rtc_set_time+0x70/0x104)
[   82.222801]  r7:00000051 r6:edb39da0 r5:edb39c00 r4:ec937e8c
[   82.228535] [<80653f74>] (rtc_set_time) from [<80655774>] (rtc_dev_ioctl+0x3c4/0x674)
[   82.236368]  r7:00000051 r6:7ecf1b74 r5:00000000 r4:edb39c00
[   82.242106] [<806553b0>] (rtc_dev_ioctl) from [<80284034>] (do_vfs_ioctl+0xa4/0xa6c)
[   82.249851]  r8:00000003 r7:80284a40 r6:ed1e9c80 r5:edb44e60 r4:7ecf1b74
[   82.256642] [<80283f90>] (do_vfs_ioctl) from [<80284a40>] (SyS_ioctl+0x44/0x6c)
[   82.263953]  r10:00000000 r9:ec936000 r8:7ecf1b74 r7:4024700a r6:ed1e9c80 r5:00000003
[   82.271869]  r4:ed1e9c80
[   82.274432] [<802849fc>] (SyS_ioctl) from [<80108520>] (ret_fast_syscall+0x0/0x1c)
[   82.282005]  r9:ec936000 r8:801086c4 r7:00000036 r6:00000000 r5:00000003 r4:0008e1bc
root@GE004097290448 b850v3:~#
Message from syslogd@GE004097290448 at Dec  3 11:17:08 ...
 kernel:[   82.108175] BUG: spinlock wrong CPU on CPU#0, hwclock/855

Message from syslogd@GE004097290448 at Dec  3 11:17:08 ...
 kernel:[   82.113660]  lock: 0xedb4899c, .magic: dead4ead, .owner: hwclock/855, .owner_cpu: 1
hwclock --systohc
root@GE004097290448 b850v3:~#

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-04 23:39:15 +01:00
Uwe Kleine-König 56d86a7e79 rtc: simplify implementations of read_alarm
Since commit d68778b80d ("rtc: initialize output parameter for read
alarm to "uninitialized"") there is no need to explicitly set
unsupported members to -1. So drop the respective assignments from
drivers.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-09 10:24:45 +02:00
Akshay Bhat ed13d89b08 rtc: Add Epson RX8010SJ RTC driver
This driver supports the following functions:
 - reading and setting time
 - alarms when connected to an IRQ
 - reading and clearing the voltage low flags

Datasheet:
http://www.epsondevice.com/docs/qd/en/DownloadServlet?id=ID000956
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11 20:19:59 +01:00