Running posix CPU timers in hard interrupt context has a few downsides:
- For PREEMPT_RT it cannot work as the expiry code needs to take
sighand lock, which is a 'sleeping spinlock' in RT. The original RT
approach of offloading the posix CPU timer handling into a high
priority thread was clumsy and provided no real benefit in general.
- For fine grained accounting it's just wrong to run this in context of
the timer interrupt because that way a process specific CPU time is
accounted to the timer interrupt.
- Long running timer interrupts caused by a large amount of expiring
timers which can be created and armed by unpriviledged user space.
There is no hard requirement to expire them in interrupt context.
If the signal is targeted at the task itself then it won't be delivered
before the task returns to user space anyway. If the signal is targeted at
a supervisor process then it might be slightly delayed, but posix CPU
timers are inaccurate anyway due to the fact that they are tied to the
tick.
Provide infrastructure to schedule task work which allows splitting the
posix CPU timer code into a quick check in interrupt context and a thread
context expiry and signal delivery function. This has to be enabled by
architectures as it requires that the architecture specific KVM
implementation handles pending task work before exiting to guest mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200730102337.783470146@linutronix.de
posix cpu timers do not handle the death of a process well.
This is most clearly seen when a multi-threaded process calls exec from a
thread that is not the leader of the thread group. The posix cpu timer code
continues to pin the old thread group leader and is unable to find the
siglock from there.
This results in posix_cpu_timer_del being unable to delete a timer,
posix_cpu_timer_set being unable to set a timer. Further to compensate for
the problems in posix_cpu_timer_del on a multi-threaded exec all timers
that point at the multi-threaded task are stopped.
The code for the timers fundamentally needs to check if the target
process/thread is alive. This needs an extra level of indirection. This
level of indirection is already available in struct pid.
So replace cpu.task with cpu.pid to get the needed extra layer of
indirection.
In addition to handling things more cleanly this reduces the amount of
memory a timer can pin when a process exits and then is reaped from
a task_struct to the vastly smaller struct pid.
Fixes: e0a7021710 ("posix-cpu-timers: workaround to suppress the problems with mt exec")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87wo86tz6d.fsf@x220.int.ebiederm.org
The head pointer in struct cpu_timer is checked to be NULL in
posix_cpu_timer_del() when the delete raced with the exit cleanup. The
works correctly as long as the timer is actually dequeued via
posix_cpu_timers_exit*().
But if the timer was dequeued due to expiry the head pointer is still set
and triggers the warning.
In fact keeping the head pointer around after any dequeue is pointless as
is has no meaning at all after that.
Clear the head pointer always on dequeue and remove the unused requeue
function while at it.
Fixes: 60bda037f1 ("posix-cpu-timers: Utilize timerqueue for storage")
Reported-by: syzbot+55acd54b57bb4b3840a4@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190905120539.707986830@linutronix.de
The rework of the posix-cpu-timers patch series dropped the empty
declaration of struct cpu_timer for the CONFIG_POSIX_TIMERS=n case which
causes the build to fail:
./include/linux/posix-timers.h:218:20: error: field 'cpu' has incomplete type
Add it back.
Fixes: 60bda037f1 ("posix-cpu-timers: Utilize timerqueue for storage")
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Using a linear O(N) search for timer insertion affects execution time and
D-cache footprint badly with a larger number of timers.
Switch the storage to a timerqueue which is already used for hrtimers and
alarmtimers. It does not affect the size of struct k_itimer as it.alarm is
still larger.
The extra list head for the expiry list will go away later once the expiry
is moved into task work context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908272129220.1939@nanos.tec.linutronix.de
Deactivation of the expiry cache is done by setting all clock caches to
0. That requires to have a check for zero in all places which update the
expiry cache:
if (cache == 0 || new < cache)
cache = new;
Use U64_MAX as the deactivated value, which allows to remove the zero
checks when updating the cache and reduces it to the obvious check:
if (new < cache)
cache = new;
This also removes the weird workaround in do_prlimit() which was required
to convert a RLIMIT_CPU value of 0 (immediate expiry) to 1 because handing
in 0 to the posix CPU timer code would have effectively disarmed it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190821192922.275086128@linutronix.de
Now that the abused struct task_cputime is gone, it's more natural to
bundle the expiry cache and the list head of each clock into a struct and
have an array of those structs.
Follow the hrtimer naming convention of 'bases' and rename the expiry cache
to 'nextevt' and adapt all usage sites.
Generates also better code .text size shrinks by 80 bytes.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908262021140.1939@nanos.tec.linutronix.de
The last users of the magic struct cputime based expiry cache are
gone. Remove the leftovers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190821192921.790209622@linutronix.de
The last users of the odd define based renaming of struct task_cputime
members are gone. Good riddance.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190821192921.499058279@linutronix.de
Using struct task_cputime for the expiry cache is a pretty odd choice and
comes with magic defines to rename the fields for usage in the expiry
cache.
struct task_cputime is basically a u64 array with 3 members, but it has
distinct members.
The expiry cache content is different than the content of task_cputime
because
expiry[PROF] = task_cputime.stime + task_cputime.utime
expiry[VIRT] = task_cputime.utime
expiry[SCHED] = task_cputime.sum_exec_runtime
So there is no direct mapping between task_cputime and the expiry cache and
the #define based remapping is just a horrible hack.
Having the expiry cache array based allows further simplification of the
expiry code.
To avoid an all in one cleanup which is hard to review add a temporary
anonymous union into struct task_cputime which allows array based access to
it. That requires to reorder the members. Add a build time sanity check to
validate that the members are at the same place.
The union and the build time checks will be removed after conversion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190821192921.105793824@linutronix.de
The expiry cache belongs into the posix_cputimers container where the other
cpu timers information is.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190821192921.014444012@linutronix.de
Per task/process data of posix CPU timers is all over the place which
makes the code hard to follow and requires ifdeffery.
Create a container to hold all this information in one place, so data is
consolidated and the ifdeffery can be confined to the posix timer header
file and removed from places like fork.
As a first step, move the cpu_timers list head array into the new struct
and clean up the initializers and simplify fork. The remaining #ifdef in
fork will be removed later.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190821192920.819418976@linutronix.de
- Rename struct siginfo to kernel_siginfo as that is used and required
- Add a forward declaration for task_struct and remove sched.h include
- Remove timex.h include as it is not needed
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.472005793@linutronix.de
Timer deletion on PREEMPT_RT is prone to priority inversion and live
locks. The hrtimer code has a synchronization mechanism for this. Posix CPU
timers will grow one.
But that mechanism cannot be invoked while holding the k_itimer lock
because that can deadlock against the running timer callback. So the lock
must be dropped which allows the timer to be freed.
The timer free can be prevented by taking RCU readlock before dropping the
lock, but because the rcu_head is part of the 'it' union a concurrent free
will overwrite the hrtimer on which the task is trying to synchronize.
Move the rcu_head out of the union to prevent this.
[ tglx: Fixed up kernel-doc. Rewrote changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.965541887@linutronix.de
Posix CPU timers store the interval in private storage for historical
reasons (it_interval used to be a non scalar representation on 32bit
systems). This is gone and there is no reason for duplicated storage
anymore.
Use it_interval everywhere.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H.J. Lu" <hjl.tools@gmail.com>
Link: https://lkml.kernel.org/r/20190111133500.945255655@linutronix.de
Linus recently observed that if we did not worry about the padding
member in struct siginfo it is only about 48 bytes, and 48 bytes is
much nicer than 128 bytes for allocating on the stack and copying
around in the kernel.
The obvious thing of only adding the padding when userspace is
including siginfo.h won't work as there are sigframe definitions in
the kernel that embed struct siginfo.
So split siginfo in two; kernel_siginfo and siginfo. Keeping the
traditional name for the userspace definition. While the version that
is used internally to the kernel and ultimately will not be padded to
128 bytes is called kernel_siginfo.
The definition of struct kernel_siginfo I have put in include/signal_types.h
A set of buildtime checks has been added to verify the two structures have
the same field offsets.
To make it easy to verify the change kernel_siginfo retains the same
size as siginfo. The reduction in size comes in a following change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
Shifting a negative signed number is undefined behavior. Looking at the
macros MAKE_PROCESS_CPUCLOCK and FD_TO_CLOCKID, it seems that the
subexpression:
(~(clockid_t) (pid) << 3)
where clockid_t resolves to a signed int, which once negated, is
undefined behavior to shift the value of if the results thus far are
negative.
It was further suggested to make these macros into inline functions.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Link: https://lkml.kernel.org/r/1514517100-18051-1-git-send-email-nick.desaulniers@gmail.com
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we change the user space type for the timerfd and posix timer
functions to newer data types, we need some form of conversion
helpers to avoid duplicating that logic.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Turn restart_block.nanosleep.{rmtp,compat_rmtp} into a tagged union (kind =
1 -> native, kind = 2 -> compat, kind = 0 -> nothing) and make the places
doing actual copyout handle compat as well as native (that will become a
helper in the next commit). Result: compat wrappers, messing with
reassignments, etc. are gone.
[ tglx: Folded in a variant of Peter Zijlstras enum patch ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170607084241.28657-6-viro@ZenIV.linux.org.uk
Keep track of the activation state of posix timers. This is a preparatory
change for making common_timer_get() usable by both hrtimer and alarm timer
implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.967783982@linutronix.de
That function is a misnomer. Rename it with a proper prefix to
posixtimer_rearm().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.811362578@linutronix.de
Having the k_clock pointer in the k_itimer struct avoids the lookup in
several code pathes and makes the next steps of unification of the hrtimer
and alarmtimer based posix timers simpler.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.641222072@linutronix.de
Preparatory patch to unify the alarm timer and hrtimer based posix interval
timer handling.
The interval is used as a criteria for rearming decisions so moving it out
of the clock specific data structures allows later unification.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.563922908@linutronix.de
None of these declarations is required outside of kernel/time. Move them to
an internal header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170530211656.394803853@linutronix.de
As a preparation for further changes, cleanup the formatting of the
k_itimer structure and add kernel doc comments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.316574129@linutronix.de
After removing mmtimer, the mmtimer struct can be removed from the k_itimer
struct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Russ Anderson <rja@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Nate Zimmer <nzimmer@sgi.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170526130534.GE30788@hpe.com
There are no more modular users providing a posix clock. The register
function is now pointless so the posix clock array can be initialized
statically at compile time and the array including the various k_clock
structs can be marked 'const'.
Inspired by changes in the Grsecurity patch set, but done proper.
[ tglx: Massaged changelog and fixed the POSIX_TIMER=n case ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Link: http://lkml.kernel.org/r/20170526090311.3377-3-hch@lst.de
struct timespec is not y2038 safe on 32 bit machines. Replace uses of
struct timespec with struct timespec64 in the kernel.
The syscall interfaces themselves will be changed in a separate series.
Note that the restart_block parameter for nanosleep has also been left
unchanged and will be part of syscall series noted above.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: y2038@lists.linaro.org
Cc: john.stultz@linaro.org
Cc: arnd@arndb.de
Link: http://lkml.kernel.org/r/1490555058-4603-8-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
struct timespec is not y2038 safe on 32 bit machines. Replace uses of
struct timespec with struct timespec64 in the kernel.
struct itimerspec internally uses struct timespec. Use struct itimerspec64
which uses struct timespec64.
The syscall interfaces themselves will be changed in a separate series.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: y2038@lists.linaro.org
Cc: john.stultz@linaro.org
Cc: arnd@arndb.de
Link: http://lkml.kernel.org/r/1490555058-4603-7-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
struct timespec is not y2038 safe on 32 bit machines. Replace uses of
struct timespec with struct timespec64 in the kernel. The syscall
interfaces themselves will be changed in a separate series.
The clock_getres() interface has also been changed to use timespec64 even
though this particular interface is not affected by the y2038 problem. This
helps verification for internal kernel code for y2038 readiness by getting
rid of time_t/ timeval/ timespec completely.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: y2038@lists.linaro.org
Cc: john.stultz@linaro.org
Cc: arnd@arndb.de
Link: http://lkml.kernel.org/r/1490555058-4603-5-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the new nsec based cputime accessors as part of the whole cputime
conversion from cputime_t to nsecs.
Also convert itimers to use nsec based internal counters. This simplifies
it and removes the whole game with error/inc_error which served to deal
with cputime_t random granularity.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1485832191-26889-20-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the new nsec based cputime accessors as part of the whole cputime
conversion from cputime_t to nsecs.
Also convert posix-cpu-timers to use nsec based internal counters to
simplify it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Link: http://lkml.kernel.org/r/1485832191-26889-19-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of providing asynchronous checks for the nohz subsystem to verify
posix cpu timers tick dependency, migrate the latter to the new mask.
In order to keep track of the running timers and expose the tick
dependency accordingly, we must probe the timers queuing and dequeuing
on threads and process lists.
Unfortunately it implies both task and signal level dependencies. We
should be able to further optimize this and merge all that on the task
level dependency, at the cost of a bit of complexity and may be overhead.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The posix cpu timer expiry time is stored in a union of two types: a 64
bits field if we rely on scheduler precise accounting, or a cputime_t if
we rely on jiffies.
This results in quite some duplicate code and special cases to handle the
two types.
Just unify this into a single 64 bits field. cputime_t can always fit
into it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull 'full dynticks' support from Ingo Molnar:
"This tree from Frederic Weisbecker adds a new, (exciting! :-) core
kernel feature to the timer and scheduler subsystems: 'full dynticks',
or CONFIG_NO_HZ_FULL=y.
This feature extends the nohz variable-size timer tick feature from
idle to busy CPUs (running at most one task) as well, potentially
reducing the number of timer interrupts significantly.
This feature got motivated by real-time folks and the -rt tree, but
the general utility and motivation of full-dynticks runs wider than
that:
- HPC workloads get faster: CPUs running a single task should be able
to utilize a maximum amount of CPU power. A periodic timer tick at
HZ=1000 can cause a constant overhead of up to 1.0%. This feature
removes that overhead - and speeds up the system by 0.5%-1.0% on
typical distro configs even on modern systems.
- Real-time workload latency reduction: CPUs running critical tasks
should experience as little jitter as possible. The last remaining
source of kernel-related jitter was the periodic timer tick.
- A single task executing on a CPU is a pretty common situation,
especially with an increasing number of cores/CPUs, so this feature
helps desktop and mobile workloads as well.
The cost of the feature is mainly related to increased timer
reprogramming overhead when a CPU switches its tick period, and thus
slightly longer to-idle and from-idle latency.
Configuration-wise a third mode of operation is added to the existing
two NOHZ kconfig modes:
- CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
as a config option. This is the traditional Linux periodic tick
design: there's a HZ tick going on all the time, regardless of
whether a CPU is idle or not.
- CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
periodic tick when a CPU enters idle mode.
- CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
tick when a CPU is idle, also slows the tick down to 1 Hz (one
timer interrupt per second) when only a single task is running on a
CPU.
The .config behavior is compatible: existing !CONFIG_NO_HZ and
CONFIG_NO_HZ=y settings get translated to the new values, without the
user having to configure anything. CONFIG_NO_HZ_FULL is turned off by
default.
This feature is based on a lot of infrastructure work that has been
steadily going upstream in the last 2-3 cycles: related RCU support
and non-periodic cputime support in particular is upstream already.
This tree adds the final pieces and activates the feature. The pull
request is marked RFC because:
- it's marked 64-bit only at the moment - the 32-bit support patch is
small but did not get ready in time.
- it has a number of fresh commits that came in after the merge
window. The overwhelming majority of commits are from before the
merge window, but still some aspects of the tree are fresh and so I
marked it RFC.
- it's a pretty wide-reaching feature with lots of effects - and
while the components have been in testing for some time, the full
combination is still not very widely used. That it's default-off
should reduce its regression abilities and obviously there are no
known regressions with CONFIG_NO_HZ_FULL=y enabled either.
- the feature is not completely idempotent: there is no 100%
equivalent replacement for a periodic scheduler/timer tick. In
particular there's ongoing work to map out and reduce its effects
on scheduler load-balancing and statistics. This should not impact
correctness though, there are no known regressions related to this
feature at this point.
- it's a pretty ambitious feature that with time will likely be
enabled by most Linux distros, and we'd like you to make input on
its design/implementation, if you dislike some aspect we missed.
Without flaming us to crisp! :-)
Future plans:
- there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
the periodic tick altogether when there's a single busy task on a
CPU. We'd first like 1 Hz to be exposed more widely before we go
for the 0 Hz target though.
- once we reach 0 Hz we can remove the periodic tick assumption from
nr_running>=2 as well, by essentially interrupting busy tasks only
as frequently as the sched_latency constraints require us to do -
once every 4-40 msecs, depending on nr_running.
I am personally leaning towards biting the bullet and doing this in
v3.10, like the -rt tree this effort has been going on for too long -
but the final word is up to you as usual.
More technical details can be found in Documentation/timers/NO_HZ.txt"
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
sched: Keep at least 1 tick per second for active dynticks tasks
rcu: Fix full dynticks' dependency on wide RCU nocb mode
nohz: Protect smp_processor_id() in tick_nohz_task_switch()
nohz_full: Add documentation.
cputime_nsecs: use math64.h for nsec resolution conversion helpers
nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
nohz: Reduce overhead under high-freq idling patterns
nohz: Remove full dynticks' superfluous dependency on RCU tree
nohz: Fix unavailable tick_stop tracepoint in dynticks idle
nohz: Add basic tracing
nohz: Select wide RCU nocb for full dynticks
nohz: Disable the tick when irq resume in full dynticks CPU
nohz: Re-evaluate the tick for the new task after a context switch
nohz: Prepare to stop the tick on irq exit
nohz: Implement full dynticks kick
nohz: Re-evaluate the tick from the scheduler IPI
sched: New helper to prevent from stopping the tick in full dynticks
sched: Kick full dynticks CPU that have more than one task enqueued.
perf: New helper to prevent full dynticks CPUs from stopping tick
perf: Kick full dynticks CPU if events rotation is needed
...
Bring a new helper that the full dynticks infrastructure can
call in order to know if it can safely stop the tick from
the posix cpu timers subsystem point of view.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Currently kernel generates IDs for posix timers in a global manner --
there's a kernel-wide IDR tree from which IDs are created. This makes
it impossible to recreate a timer with a desired ID (in particular
this is done by the CRIU checkpoint-restore project) -- since these
IDs are global it may happen, that at the time we recreate a timer, the
ID we want for it is already busy by some other timer.
In order to address this, replace the IDR tree with a global hash
table for timers and makes timer IDs unique per signal_struct (to
which timers are linked anyway). With this, two timers belonging to
different processes may have equal IDs and we can recreate either of
them with the ID we want.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Matthew Helsley <matt.helsley@gmail.com>
Link: http://lkml.kernel.org/r/513D9FF5.9010004@parallels.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that periodic alarmtimers are managed by the handler function,
remove the period value from the alarm structure and let the handlers
manage the interval on their own.
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Ben Nagy reported a scalability problem with KVM/QEMU that hit very hard
a single spinlock (idr_lock) in posix-timers code, on its 48 core
machine.
Even on a 16 cpu machine (2x4x2), a single test can show 98% of cpu time
used in ticket_spin_lock, from lock_timer
Ref: http://www.spinics.net/lists/kvm/msg51526.html
Switching to RCU is quite easy, IDR being already RCU ready. idr_lock
should be locked only for an insert/delete, not a lookup.
Benchmark on a 2x4x2 machine, 16 processes calling timer_gettime().
Before :
real 1m18.669s
user 0m1.346s
sys 1m17.180s
After :
real 0m3.296s
user 0m1.366s
sys 0m1.926s
Reported-by: Ben Nagy <ben@iagu.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Ben Nagy <ben@iagu.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Richard Cochran <richard.cochran@omicron.at>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch exposes alarm-timers to userland via the posix clock
and timers interface, using two new clockids: CLOCK_REALTIME_ALARM
and CLOCK_BOOTTIME_ALARM. Both clockids behave identically to
CLOCK_REALTIME and CLOCK_BOOTTIME, respectively, but timers
set against the _ALARM suffixed clockids will wake the system if
it is suspended.
Some background can be found here:
https://lwn.net/Articles/429925/
The concept for Alarm-timers was inspired by the Android Alarm
driver (by Arve Hjønnevåg) found in the Android kernel tree.
See: http://android.git.kernel.org/?p=kernel/common.git;a=blob;f=drivers/rtc/alarm.c;h=1250edfbdf3302f5e4ea6194847c6ef4bb7beb1c;hb=android-2.6.36
While the in-kernel interface is pretty similar between
alarm-timers and Android alarm driver, the user-space interface
for the Android alarm driver is via ioctls to a new char device.
As mentioned above, I've instead chosen to export this functionality
via the posix interface, as it seemed a little simpler and avoids
creating duplicate interfaces to things like CLOCK_REALTIME and
CLOCK_MONOTONIC under alternate names (ie:ANDROID_ALARM_RTC and
ANDROID_ALARM_SYSTEMTIME).
The semantics of the Android alarm driver are different from what
this posix interface provides. For instance, threads other then
the thread waiting on the Android alarm driver are able to modify
the alarm being waited on. Also this interface does not allow
the same wakelock semantics that the Android driver provides
(ie: kernel takes a wakelock on RTC alarm-interupt, and holds it
through process wakeup, and while the process runs, until the
process either closes the char device or calls back in to wait
on a new alarm).
One potential way to implement similar semantics may be via
the timerfd infrastructure, but this needs more research.
There may also need to be some sort of sysfs system level policy
hooks that allow alarm timers to be disabled to keep them
from firing at inappropriate times (ie: laptop in a well insulated
bag, mid-flight).
CC: Arve Hjønnevåg <arve@android.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
This patch adds support for adding and removing posix clocks. The
clock lifetime cycle is patterned after usb devices. Each clock is
represented by a standard character device. In addition, the driver
may optionally implement custom character device operations.
The posix clock and timer system calls listed below now work with
dynamic posix clocks, as well as the traditional static clocks.
The following system calls are affected:
- clock_adjtime (brand new syscall)
- clock_gettime
- clock_getres
- clock_settime
- timer_create
- timer_delete
- timer_gettime
- timer_settime
[ tglx: Adapted to the posix-timer cleanup. Moved clock_posix_dynamic
to posix-clock.c and made all referenced functions static ]
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Acked-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <20110201134420.164172635@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename register_posix_clock() to posix_timers_register_clock(). That's
what the function really does. As a side effect this cleans up the
posix_clock namespace for the upcoming dynamic posix_clock
infrastructure.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Richard Cochran <richard.cochran@omicron.at>
Cc: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <alpine.LFD.2.00.1102021222240.31804@localhost6.localdomain6>
Extend the negative clockids which are currently used by posix cpu
timers to encode the PID with a file descriptor based type which
encodes the fd in the upper bits.
Originally-from: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <20110201134420.062860200@linutronix.de>
Thomas Gleixner
Eric W. Biederman
Sebastian Andrzej Siewior
Nick Desaulniers
Greg Kroah-Hartman
Deepa Dinamani
Al Viro
Christoph Hellwig
Dimitri Sivanich
Frederic Weisbecker
Linus Torvalds
Pavel Emelyanov
John Stultz
Eric Dumazet
Richard Cochran
Richard Cochran