gnttab_end_foreign_access() is used to free a grant reference and
optionally to free the associated page. In case the grant is still in
use by the other side processing is being deferred. This leads to a
problem in case no page to be freed is specified by the caller: the
caller doesn't know that the page is still mapped by the other side
and thus should not be used for other purposes.
The correct way to handle this situation is to take an additional
reference to the granted page in case handling is being deferred and
to drop that reference when the grant reference could be freed
finally.
This requires that there are no users of gnttab_end_foreign_access()
left directly repurposing the granted page after the call, as this
might result in clobbered data or information leaks via the not yet
freed grant reference.
This is part of CVE-2022-23041 / XSA-396.
Reported-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V4:
- expand comment in header
V5:
- get page ref in case of kmalloc() failure, too
Remove gnttab_query_foreign_access(), as it is unused and unsafe to
use.
All previous use cases assumed a grant would not be in use after
gnttab_query_foreign_access() returned 0. This information is useless
in best case, as it only refers to a situation in the past, which could
have changed already.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add a new grant table function gnttab_try_end_foreign_access(), which
will remove and free a grant if it is not in use.
Its main use case is to either free a grant if it is no longer in use,
or to take some other action if it is still in use. This other action
can be an error exit, or (e.g. in the case of blkfront persistent grant
feature) some special handling.
This is CVE-2022-23036, CVE-2022-23038 / part of XSA-396.
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- new patch
V4:
- add comments to header (Jan Beulich)
It is better/preferred not to include file names in source files
because (a) they are not needed and (b) they can be incorrect,
so just delete this incorrect file name.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lore.kernel.org/r/20220130191705.24971-1-rdunlap@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYd729AAKCRCAXGG7T9hj
vmPzAP9MnRSseEV8C1t1naeW6W57DCQ9iTOXwC74q/5OxaINngEA7O2H6+FeRH63
lo3vOW/S2W8G+iqET5DQ9z3YDQnItww=
=Zlo8
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a fix for the Xen gntdev driver
- a fix for running as Xen dom0 booted via EFI and the EFI framebuffer
being located above 4GB
- a series for support of mapping other guest's memory by using zone
device when running as Xen guest on Arm
* tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
dt-bindings: xen: Clarify "reg" purpose
arm/xen: Read extended regions from DT and init Xen resource
xen/unpopulated-alloc: Add mechanism to use Xen resource
xen/balloon: Bring alloc(free)_xenballooned_pages helpers back
arm/xen: Switch to use gnttab_setup_auto_xlat_frames() for DT
xen/unpopulated-alloc: Drop check for virt_addr_valid() in fill_list()
xen/x86: obtain upper 32 bits of video frame buffer address for Dom0
xen/gntdev: fix unmap notification order
The main reason of this change is that unpopulated-alloc
code cannot be used in its current form on Arm, but there
is a desire to reuse it to avoid wasting real RAM pages
for the grant/foreign mappings.
The problem is that system "iomem_resource" is used for
the address space allocation, but the really unallocated
space can't be figured out precisely by the domain on Arm
without hypervisor involvement. For example, not all device
I/O regions are known by the time domain starts creating
grant/foreign mappings. And following the advise from
"iomem_resource" we might end up reusing these regions by
a mistake. So, the hypervisor which maintains the P2M for
the domain is in the best position to provide unused regions
of guest physical address space which could be safely used
to create grant/foreign mappings.
Introduce new helper arch_xen_unpopulated_init() which purpose
is to create specific Xen resource based on the memory regions
provided by the hypervisor to be used as unused space for Xen
scratch pages. If arch doesn't define arch_xen_unpopulated_init()
the default "iomem_resource" will be used.
Update the arguments list of allocate_resource() in fill_list()
to always allocate a region from the hotpluggable range
(maximum possible addressable physical memory range for which
the linear mapping could be created). If arch doesn't define
arch_get_mappable_range() the default range (0,-1) will be used.
The behaviour on x86 won't be changed by current patch as both
arch_xen_unpopulated_init() and arch_get_mappable_range()
are not implemented for it.
Also fallback to allocate xenballooned pages (balloon out RAM
pages) if we do not have any suitable resource to work with
(target_resource is invalid) and as the result we won't be able
to provide unpopulated pages on a request.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1639080336-26573-5-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
This patch rolls back some of the changes introduced by commit
121f2faca2 "xen/balloon: rename alloc/free_xenballooned_pages"
in order to make possible to still allocate xenballooned pages
if CONFIG_XEN_UNPOPULATED_ALLOC is enabled.
On Arm the unpopulated pages will be allocated on top of extended
regions provided by Xen via device-tree (the subsequent patches
will add required bits to support unpopulated-alloc feature on Arm).
The problem is that extended regions feature has been introduced
into Xen quite recently (during 4.16 release cycle). So this
effectively means that Linux must only use unpopulated-alloc on Arm
if it is running on "new Xen" which advertises these regions.
But, it will only be known after parsing the "hypervisor" node
at boot time, so before doing that we cannot assume anything.
In order to keep working if CONFIG_XEN_UNPOPULATED_ALLOC is enabled
and the extended regions are not advertised (Linux is running on
"old Xen", etc) we need the fallback to alloc_xenballooned_pages().
This way we wouldn't reduce the amount of memory usable (wasting
RAM pages) for any of the external mappings anymore (and eliminate
XSA-300) with "new Xen", but would be still functional ballooning
out RAM pages with "old Xen".
Also rename alloc(free)_xenballooned_pages to xen_alloc(free)_ballooned_pages
and make xen_alloc(free)_unpopulated_pages static inline in xen.h
if CONFIG_XEN_UNPOPULATED_ALLOC is disabled.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1639080336-26573-4-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The hypervisor has been supplying this information for a couple of major
releases. Make use of it. The need to set a flag in the capabilities
field also points out that the prior setting of that field from the
hypervisor interface's gbl_caps one was wrong, so that code gets deleted
(there's also no equivalent of this in native boot code).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/a3df8bf3-d044-b7bb-3383-cd5239d6d4af@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The Xen console driver is still vulnerable for an attack via excessive
number of events sent by the backend. Fix that by using a lateeoi event
channel.
For the normal domU initial console this requires the introduction of
bind_evtchn_to_irq_lateeoi() as there is no xenbus device available
at the time the event channel is bound to the irq.
As the decision whether an interrupt was spurious or not requires to
test for bytes having been read from the backend, move sending the
event into the if statement, as sending an event without having found
any bytes to be read is making no sense at all.
This is part of XSA-391
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
---
V2:
- slightly adapt spurious irq detection (Jan Beulich)
V3:
- fix spurious irq detection (Jan Beulich)
Add the definition of pvUSB protocol used between the pvUSB frontend in
a Xen domU and the pvUSB backend in a Xen driver domain (usually Dom0).
This header was originally provided by Fujitsu for Xen based on Linux
2.6.18.
Changes are:
- adapt to Linux kernel style guide
- use Xen namespace
- add lots of comments
- don't use kernel internal defines
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211123132048.5335-2-jgross@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When booting the xenbus driver will wait for PV devices to have
connected to their backends before continuing. The timeout is different
between essential and non-essential devices.
Non-essential devices are identified by their nodenames directly in the
xenbus driver, which requires to update this list in case a new device
type being non-essential is added (this was missed for several types
in the past).
In order to avoid this problem, add a "not_essential" flag to struct
xenbus_driver which can be set to "true" by the respective frontend.
Set this flag for the frontends currently regarded to be not essential
(vkbs and vfb) and use it for testing in the xenbus driver.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211022064800.14978-2-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
alloc_xenballooned_pages() and free_xenballooned_pages() are used as
direct replacements of xen_alloc_unpopulated_pages() and
xen_free_unpopulated_pages() in case CONFIG_XEN_UNPOPULATED_ALLOC isn't
defined.
Guard both functions with !CONFIG_XEN_UNPOPULATED_ALLOC and rename them
to the xen_*() variants they are replacing. This allows to remove some
ifdeffery from the xen.h header file. Adapt the prototype of the
functions to match.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211102092234.17852-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Put the definitions of the hypercalls usable only by pv guests inside
CONFIG_XEN_PV sections.
On Arm two dummy functions related to pv hypercalls can be removed.
While at it remove the no longer supported tmem hypercall definition.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211028081221.2475-3-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Xen-pciback driver was designed to be built for x86 only. But it
can also be used by other architectures, e.g. Arm.
Currently PCI backend implements multiple functionalities at a time,
such as:
1. It is used as a database for assignable PCI devices, e.g. xl
pci-assignable-{add|remove|list} manipulates that list. So, whenever
the toolstack needs to know which PCI devices can be passed through
it reads that from the relevant sysfs entries of the pciback.
2. It is used to hold the unbound PCI devices list, e.g. when passing
through a PCI device it needs to be unbound from the relevant device
driver and bound to pciback (strictly speaking it is not required
that the device is bound to pciback, but pciback is again used as a
database of the passed through PCI devices, so we can re-bind the
devices back to their original drivers when guest domain shuts down)
3. Device reset for the devices being passed through
4. Para-virtualised use-cases support
The para-virtualised part of the driver is not always needed as some
architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend
model for PCI device passthrough.
For such use-cases make the very first step in splitting the
xen-pciback driver into two parts: Xen PCI stub and PCI PV backend
drivers.
For that add new configuration options CONFIG_XEN_PCI_STUB and
CONFIG_XEN_PCIDEV_STUB, so the driver can be limited in its
functionality, e.g. no support for para-virtualised scenario.
x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND for the
fully featured backend driver.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211028143620.144936-1-andr2000@gmail.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Commit b24413180f ("License cleanup: add SPDX GPL-2.0 license
identifier to files with no license") was meant to do a tree-wide
cleanup for files without any license information by adding a SPDX
GPL-2.0 line to them.
Unfortunately this was applied even to several Xen-related headers
which have been originally under the MIT license, but obviously have
been copied to the Linux tree from the Xen project without keeping the
license boiler plate as required.
Correct that by changing the license of those files back to "MIT".
Some files still contain the MIT license text. Replace that by the
related SPDX line.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211015143312.29900-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The function doesn't use it and all of its callers say in a comment that
their respective arguments are to be non-NULL only in auto-translated
mode. Since xen_remap_domain_mfn_array() isn't supposed to be used by
non-PV, drop the parameter there as well. It was bogusly passed as non-
NULL (PRIV_VMA_LOCKED) by its only caller anyway. For
xen_remap_domain_gfn_range(), otoh, it's not clear at all why this
wouldn't want / might not need to gain auto-translated support down the
road, so the parameter is retained there despite now remaining unused
(and the only caller passing NULL); correct a respective comment as
well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/036ad8a2-46f9-ac3d-6219-bdc93ab9e10b@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The code is unreachable for HVM or PVH, and it also makes little sense
in auto-translated environments. On Arm, with
xen_{create,destroy}_contiguous_region() both being stubs, I have a hard
time seeing what good the Xen specific variant does - the generic one
ought to be fine for all purposes there. Still Arm code explicitly
references symbols here, so the code will continue to be included there.
Instead of making PCI_XEN's "select" conditional, simply drop it -
SWIOTLB_XEN will be available unconditionally in the PV case anyway, and
is - as explained above - dead code in non-PV environments.
This in turn allows dropping the stubs for
xen_{create,destroy}_contiguous_region(), the former of which was broken
anyway - it failed to set the DMA handle output.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Sync include/xen/interface/io/ring.h with Xen's newest version in
order to get the RING_COPY_RESPONSE() and RING_RESPONSE_PROD_OVERFLOW()
macros.
Note that this will correct the wrong license info by adding the
missing original copyright notice.
Signed-off-by: Juergen Gross <jgross@suse.com>
The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."
I recently receive a patch to explicitly add a new one.
Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.
It is even nicer if scripts/checkpatch.pl can check it.
If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.
[1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/
Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
Newer Xen versions expose two Xen feature flags to tell us if the domain
is directly mapped or not. Only when a domain is directly mapped it
makes sense to enable swiotlb-xen on ARM.
Introduce a function on ARM to check the new Xen feature flags and also
to deal with the legacy case. Call the function xen_swiotlb_detect.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 76fc253723 ("xen/acpi-stub: Disable it b/c the acpi_processor_add
is no longer called.") declared as BROKEN support for Xen ACPI stub (which
is required for xen-acpi-{cpu|memory}-hotplug) and suggested that this
is temporary and will be soon fixed. This was in March 2013.
Further, commit cfafae9403 ("xen: rename dom0_op to platform_op")
renamed an interface used by memory hotplug code without updating that
code (as it was BROKEN and therefore not compiled). This was
in November 2015 and has gone unnoticed for over 5 year.
It is now clear that this code is of no interest to anyone and therefore
should be removed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1618336344-3162-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Split xen_swiotlb_init into a normal an an early case. That makes both
much simpler and more readable, and also allows marking the early
code as __init and x86-only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
It's not helpful if every driver has to cook its own. Generalize
xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which
shouldn't have expanded to zero to begin with). Use the constants in
p2m.c and gntdev.c right away, and update field types where necessary so
they would match with the constants' types (albeit without touching
struct ioctl_gntdev_grant_ref's ref field, as that's part of the public
interface of the kernel and would require introducing a dependency on
Xen's grant_table.h public header).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/db7c38a5-0d75-d5d1-19de-e5fe9f0b9c48@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Add syfs nodes for each xenbus device showing event statistics (number
of events and spurious events, number of associated event channels)
and for setting a spurious event threshold in case a frontend is
sending too many events without being rogue on purpose.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210219154030.10892-7-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU. Instead of the complex
"fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an
rwlock so that page faults are concurrent, but the code that can run
against page faults is limited. Right now only page faults take the
lock for reading; in the future this will be extended to some
cases of page table destruction. I hope to switch the default MMU
around 5.12-rc3 (some testing was delayed due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmApSRgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOc7wf9FnlinKoTFaSk7oeuuhF/CoCVwSFs
Z9+A2sNI99tWHQxFR6dyDkEFeQoXnqSxfLHtUVIdH/JnTg0FkEvFz3NK+0PzY1PF
PnGNbSoyhP58mSBG4gbBAxdF3ZJZMB8GBgYPeR62PvMX2dYbcHqVBNhlf6W4MQK4
5mAUuAnbf19O5N267sND+sIg3wwJYwOZpRZB7PlwvfKAGKf18gdBz5dQ/6Ej+apf
P7GODZITjqM5Iho7SDm/sYJlZprFZT81KqffwJQHWFMEcxFgwzrnYPx7J3gFwRTR
eeh9E61eCBDyCTPpHROLuNTVBqrAioCqXLdKOtO5gKvZI3zmomvAsZ8uXQ==
=uFZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYCu8dgAKCRCAXGG7T9hj
vuxTAP0S1iJ6DR5Y2pdSy2dfxn/gItNqUlR7vbFdxgf/mBSNxAD/fxbtVWM1GuTs
3Fwz0T60BcxsHZXhDcPAA2cjoqORbQs=
=2b0M
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A series of Xen related security fixes, all related to limited error
handling in Xen backend drivers"
* tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkback: fix error handling in xen_blkbk_map()
xen-scsiback: don't "handle" error by BUG()
xen-netback: don't "handle" error by BUG()
xen-blkback: don't "handle" error by BUG()
xen/arm: don't ignore return errors from set_phys_to_machine
Xen/gntdev: correct error checking in gntdev_map_grant_pages()
Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()
Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()
Xen/x86: don't bail early from clear_foreign_p2m_mapping()
Pull networking updates from David Miller:
"Here is what we have this merge window:
1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.
2) Add RSS multi group support to octeontx2-pf driver, from Geetha
Sowjanya.
3) Add support for KS8851 PHY. From Marek Vasut.
4) Add support for GarfieldPeak bluetooth controller from Kiran K.
5) Add support for half-duplex tcan4x5x can controllers.
6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
Liew.
7) Rework RX port offload infrastructure, particularly wrt, UDP
tunneling, from Jakub Kicinski.
8) Add BCM72116 PHY support, from Florian Fainelli.
9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
Oltean.
10) Add support for picosecond rx delay in dwmac-meson8b chips. From
Martin Blumenstingl.
11) Support TSO on xfrm interfaces from Eyal Birger.
12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.
13) Support BCM4908 integrated switch, from Rafał Miłecki.
14) Support for directly accessing kernel module variables via module
BTF info, from Andrii Naryiko.
15) Add DASH (esktop and mobile Architecture for System Hardware)
support to r8169 driver, from Heiner Kallweit.
16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.
17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.
18) Support link aggregation in DSA, from Tobias Waldekranz.
19) Support for bitwidse atomics in bpf, from Brendan Jackman.
20) SmartEEE support in at803x driver, from Russell King.
21) Add support for flow based tunneling to GTP, from Pravin B Shelar.
22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.
23) TLS RX offload for bonding, from Tariq Toukan.
24) RX decap offklload support in mac80211, from Felix Fietkou.
25) devlink health saupport in octeontx2-af, from George Cherian.
26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung
27) Delegated actionss support in mptcp, from Paolo Abeni.
28) Support receive timestamping when doin zerocopy tcp receive. From
Arjun Ray.
29) HTB offload support for mlx5, from Maxim Mikityanskiy.
30) UDP GRO forwarding, from Maxim Mikityanskiy.
31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.
32) Weighted random twos choice algorithm for ipvs, from Darby Payne.
33) Fix netdev registration deadlock, from Johannes Berg.
34) Various conversions to new tasklet api, from EmilRenner Berthing.
35) Bulk skb allocations in veth, from Lorenzo Bianconi.
36) New ethtool interface for lane setting, from Danielle Ratson.
37) Offload failiure notifications for routes, from Amit Cohen.
38) BCM4908 support, from Rafał Miłecki.
39) Support several new iwlwifi chips, from Ihab Zhaika.
40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.
41) Support for mhi prrotocols, from Loic Poulain.
42) Optimize bpf program stats.
43) Implement RFC6056, for better port randomization, from Eric
Dumazet.
44) hsr tag offloading support from George McCollister.
45) Netpoll support in qede, from Bhaskar Upadhaya.
46) 2005/400g speed support in bonding 3ad mode, from Nikolay
Aleksandrov.
47) Netlink event support in mptcp, from Florian Westphal.
48) Better skbuff caching, from Alexander Lobakin.
49) MRP (Media Redundancy Protocol) offloading in DSA and a few
drivers, from Horatiu Vultur.
50) mqprio saupport in mvneta, from Maxime Chevallier.
51) Remove of_phy_attach, no longer needed, from Florian Fainelli"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
octeontx2-pf: Fix otx2_get_fecparam()
cteontx2-pf: cn10k: Prevent harmless double shift bugs
net: stmmac: Add PCI bus info to ethtool driver query output
ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
ptp: ptp_clockmatrix: Clean-up dev_*() messages.
ptp: ptp_clockmatrix: Remove unused header declarations.
ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
net: stmmac: dwmac-sun8i: Add a shutdown callback
net: stmmac: dwmac-sun8i: Minor probe function cleanup
net: stmmac: dwmac-sun8i: Use reset_control_reset
net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
net: stmmac: dwmac-sun8i: Return void from PHY unpower
r8169: use macro pm_ptr
net: mdio: Remove of_phy_attach()
net: mscc: ocelot: select PACKING in the Kconfig
net: re-solve some conflicts after net -> net-next merge
net: dsa: tag_rtl4_a: Support also egress tags
...
Failure of the kernel part of the mapping operation should also be
indicated as an error to the caller, or else it may assume the
respective kernel VA is okay to access.
Furthermore gnttab_map_refs() failing still requires recording
successfully mapped handles, so they can be unmapped subsequently. This
in turn requires there to be a way to tell full hypercall failure from
partial success - preset map_op status fields such that they won't
"happen" to look as if the operation succeeded.
Also again use GNTST_okay instead of implying its value (zero).
This is part of XSA-361.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
-----BEGIN PGP SIGNATURE-----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=6EwV
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
In order to support the possibility of per-device event channel
settings (e.g. lateeoi spurious event thresholds) add a xenbus device
pointer to struct irq_info() and modify the related event channel
binding interfaces to take the pointer to the xenbus device as a
parameter instead of the domain id of the other side.
While at it remove the stale prototype of bind_evtchn_to_irq_lateeoi().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After Commit 3499ba8198 ("xen: Fix event channel callback via
INTX/GSI"), xenbus_probe() will be called too early on Arm. This will
recent to a guest hang during boot.
If the hang wasn't there, we would have ended up to call
xenbus_probe() twice (the second time is in xenbus_probe_initcall()).
We don't need to initialize xenbus_probe() early for Arm guest.
Therefore, the call in xen_guest_init() is now removed.
After this change, there is no more external caller for xenbus_probe().
So the function is turned to a static one. Interestingly there were two
prototypes for it.
Cc: stable@vger.kernel.org
Fixes: 3499ba8198 ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Xen added this in 2015 (Xen 4.6). On x86_64 and Arm it fills what was
previously a 32-bit hole in the generic shared_info structure; on
i386 it had to go at the end of struct arch_shared_info.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
For a while, event channel notification via the PCI platform device
has been broken, because we attempt to communicate with xenstore before
we even have notifications working, with the xs_reset_watches() call
in xs_init().
We tend to get away with this on Xen versions below 4.0 because we avoid
calling xs_reset_watches() anyway, because xenstore might not cope with
reading a non-existent key. And newer Xen *does* have the vector
callback support, so we rarely fall back to INTX/GSI delivery.
To fix it, clean up a bit of the mess of xs_init() and xenbus_probe()
startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM
case, deferring it to be called from xenbus_probe() in the XS_HVM case
instead.
Then fix up the invocation of xenbus_probe() to happen either from its
device_initcall if the callback is available early enough, or when the
callback is finally set up. This means that the hack of calling
xenbus_probe() from a workqueue after the first interrupt, or directly
from the PCI platform device setup, is no longer needed.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
This commit adds a counter of pending messages for each watch in the
struct. It is used to skip unnecessary pending messages lookup in
'unregister_xenbus_watch()'. It could also be used in 'will_handle'
callback.
This is part of XSA-349
Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Some code does not directly make 'xenbus_watch' object and call
'register_xenbus_watch()' but use 'xenbus_watch_path()' instead. This
commit adds support of 'will_handle' callback in the
'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'.
This is part of XSA-349
Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
If handling logics of watch events are slower than the events enqueue
logic and the events can be created from the guests, the guests could
trigger memory pressure by intensively inducing the events, because it
will create a huge number of pending events that exhausting the memory.
Fortunately, some watch events could be ignored, depending on its
handler callback. For example, if the callback has interest in only one
single path, the watch wouldn't want multiple pending events. Or, some
watches could ignore events to same path.
To let such watches to volutarily help avoiding the memory pressure
situation, this commit introduces new watch callback, 'will_handle'. If
it is not NULL, it will be called for each new event just before
enqueuing it. Then, if the callback returns false, the event will be
discarded. No watch is using the callback for now, though.
This is part of XSA-349
Cc: stable@vger.kernel.org
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reported-by: Michael Kurth <mku@amazon.de>
Reported-by: Pawel Wieczorkiewicz <wipawel@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 9e2369c06c ("xen: add helpers to allocate unpopulated
memory") introduced usage of ZONE_DEVICE memory for foreign memory
mappings.
Unfortunately this collides with using page->lru for Xen backend
private page caches.
Fix that by using page->zone_device_data instead.
Cc: <stable@vger.kernel.org> # 5.9
Fixes: 9e2369c06c ("xen: add helpers to allocate unpopulated memory")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of having similar helpers in multiple backend drivers use
common helpers for caching pages allocated via gnttab_alloc_pages().
Make use of those helpers in blkback and scsiback.
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX5VVeQAKCRCAXGG7T9hj
voI0AQD3ol/EN9uHW1qKduBI/nl5tgv325Zri8CMu60kS45pgAD/ccUXRcHojs3l
YIfgcgT4qKQFWzv57Fc9FUBQJMahJgM=
=6ZgH
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a series for the Xen pv block drivers adding module parameters for
better control of resource usge
- a cleanup series for the Xen event driver
* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Documentation: add xen.fifo_events kernel parameter description
xen/events: unmask a fifo event channel only if it was masked
xen/events: only register debug interrupt for 2-level events
xen/events: make struct irq_info private to events_base.c
xen: remove no longer used functions
xen-blkfront: Apply changed parameter name to the document
xen-blkfront: add a parameter for disabling of persistent grants
xen-blkback: add a parameter for disabling of persistent grants
With the switch to the lateeoi model for interdomain event channels
some functions are no longer in use. Remove them.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX47RxAAKCRCAXGG7T9hj
vj7WAP94Cj5cQXPGaTD9GAVLVLgF6L2wPxUT1/gqLMulfRgHdAEAqVidg8fLhI6G
vgQiDwYp/svqZco2qA5i4YN+Xnr6Vg0=
=V/7G
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- A single patch to fix the Xen security issue XSA-331 (malicious
guests can DoS dom0 by triggering NULL-pointer dereferences or access
to stale data).
- A larger series to fix the Xen security issue XSA-332 (malicious
guests can DoS dom0 by sending events at high frequency leading to
dom0's vcpus being busy in IRQ handling for elongated times).
* tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: block rogue events for some time
xen/events: defer eoi in case of excessive number of events
xen/events: use a common cpu hotplug hook for event channels
xen/events: switch user event channels to lateeoi model
xen/pciback: use lateeoi irq binding
xen/pvcallsback: use lateeoi irq binding
xen/scsiback: use lateeoi irq binding
xen/netback: use lateeoi irq binding
xen/blkback: use lateeoi irq binding
xen/events: add a new "late EOI" evtchn framework
xen/events: fix race in evtchn_fifo_unmask()
xen/events: add a proper barrier to 2-level uevent unmasking
xen/events: avoid removing an event channel while handling it
In order to avoid tight event channel related IRQ loops add a new
framework of "late EOI" handling: the IRQ the event channel is bound
to will be masked until the event has been handled and the related
driver is capable to handle another event. The driver is responsible
for unmasking the event channel via the new function xen_irq_lateeoi().
This is similar to binding an event channel to a threaded IRQ, but
without having to structure the driver accordingly.
In order to support a future special handling in case a rogue guest
is sending lots of unsolicited events, add a flag to xen_irq_lateeoi()
which can be set by the caller to indicate the event was a spurious
one.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX1Rn1wAKCRCAXGG7T9hj
vlEjAQC/KGC3wYw5TweWcY48xVzgvued3JLAQ6pcDlOe6osd6AEAzZcZKgL948cx
oY0T98dxb/U+lUhbIzhpBr/30g8JbAQ=
=Xcxp
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"A small series for fixing a problem with Xen PVH guests when running
as backends (e.g. as dom0).
Mapping other guests' memory is now working via ZONE_DEVICE, thus not
requiring to abuse the memory hotplug functionality for that purpose"
* tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: add helpers to allocate unpopulated memory
memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC
xen/balloon: add header guard
To be used in order to create foreign mappings. This is based on the
ZONE_DEVICE facility which is used by persistent memory devices in
order to create struct pages and kernel virtual mappings for the IOMEM
areas of such devices. Note that on kernels without support for
ZONE_DEVICE Xen will fallback to use ballooned pages in order to
create foreign mappings.
The newly added helpers use the same parameters as the existing
{alloc/free}_xenballooned_pages functions, which allows for in-place
replacement of the callers. Once a memory region has been added to be
used as scratch mapping space it will no longer be released, and pages
returned are kept in a linked list. This allows to have a buffer of
pages and prevents resorting to frequent additions and removals of
regions.
If enabled (because ZONE_DEVICE is supported) the usage of the new
functionality untangles Xen balloon and RAM hotplug from the usage of
unpopulated physical memory ranges to map foreign pages, which is the
correct thing to do in order to avoid mappings of foreign pages depend
on memory hotplug.
Note the driver is currently not enabled on Arm platforms because it
would interfere with the identity mapping required on some platforms.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
In order to protect against the header being included multiple times
on the same compilation unit.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200901083326.21264-2-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Juergen Gross
Randy Dunlap
Linus Torvalds
Oleksandr Tyshchenko
Jan Beulich
Greg Kroah-Hartman
Oleksandr Andrushchenko
Stefano Stabellini
Masahiro Yamada
Boris Ostrovsky
Christoph Hellwig
Paolo Bonzini
Julien Grall
David Woodhouse
SeongJae Park
Masami Hiramatsu
Roger Pau Monne