- Fix some missing-prototype warnings
- Fix user events struct args (did not include size of struct)
When creating a user event, the "struct" keyword is to denote
that the size of the field will be passed in. But the parsing
failed to handle this case.
- Add selftest to struct sizes for user events
- Fix sample code for direct trampolines.
The sample code for direct trampolines attached to handle_mm_fault().
But the prototype changed and the direct trampoline sample code
was not updated. Direct trampolines needs to have the arguments correct
otherwise it can fail or crash the system.
- Remove unused ftrace_regs_caller_ret() prototype.
- Quiet false positive of FORTIFY_SOURCE
Due to backward compatibility, the structure used to save stack traces
in the kernel had a fixed size of 8. This structure is exported to
user space via the tracing format file. A change was made to allow
more than 8 functions to be recorded, and user space now uses the
size field to know how many functions are actually in the stack.
But the structure still has size of 8 (even though it points into
the ring buffer that has the required amount allocated to hold a
full stack. This was fine until the fortifier noticed that the
memcpy(&entry->caller, stack, size) was greater than the 8 functions
and would complain at runtime about it. Hide this by using a pointer
to the stack location on the ring buffer instead of using the address
of the entry structure caller field.
- Fix a deadloop in reading trace_pipe that was caused by a mismatch
between ring_buffer_empty() returning false which then asked to
read the data, but the read code uses rb_num_of_entries() that
returned zero, and causing a infinite "retry".
- Fix a warning caused by not using all pages allocated to store
ftrace functions, where this can happen if the linker inserts a bunch of
"NULL" entries, causing the accounting of how many pages needed
to be off.
- Fix histogram synthetic event crashing when the start event is
removed and the end event is still using a variable from it.
- Fix memory leak in freeing iter->temp in tracing_release_pipe()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZLBF6hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkswAP4mhdoFFfNosM7+Sh/R4t31IxKZApm9
M2Hf9jgvJ7b65AD/VV1XfO6skw2+5Yn9S4UyNE2MQaYxPwWpONcNFUzZ3Q8=
=Nb+7
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix some missing-prototype warnings
- Fix user events struct args (did not include size of struct)
When creating a user event, the "struct" keyword is to denote that
the size of the field will be passed in. But the parsing failed to
handle this case.
- Add selftest to struct sizes for user events
- Fix sample code for direct trampolines.
The sample code for direct trampolines attached to handle_mm_fault().
But the prototype changed and the direct trampoline sample code was
not updated. Direct trampolines needs to have the arguments correct
otherwise it can fail or crash the system.
- Remove unused ftrace_regs_caller_ret() prototype.
- Quiet false positive of FORTIFY_SOURCE
Due to backward compatibility, the structure used to save stack
traces in the kernel had a fixed size of 8. This structure is
exported to user space via the tracing format file. A change was made
to allow more than 8 functions to be recorded, and user space now
uses the size field to know how many functions are actually in the
stack.
But the structure still has size of 8 (even though it points into the
ring buffer that has the required amount allocated to hold a full
stack.
This was fine until the fortifier noticed that the
memcpy(&entry->caller, stack, size) was greater than the 8 functions
and would complain at runtime about it.
Hide this by using a pointer to the stack location on the ring buffer
instead of using the address of the entry structure caller field.
- Fix a deadloop in reading trace_pipe that was caused by a mismatch
between ring_buffer_empty() returning false which then asked to read
the data, but the read code uses rb_num_of_entries() that returned
zero, and causing a infinite "retry".
- Fix a warning caused by not using all pages allocated to store ftrace
functions, where this can happen if the linker inserts a bunch of
"NULL" entries, causing the accounting of how many pages needed to be
off.
- Fix histogram synthetic event crashing when the start event is
removed and the end event is still using a variable from it
- Fix memory leak in freeing iter->temp in tracing_release_pipe()
* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak of iter->temp when reading trace_pipe
tracing/histograms: Add histograms to hist_vars if they have referenced variables
tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
ring-buffer: Fix deadloop issue on reading trace_pipe
tracing: arm64: Avoid missing-prototype warnings
selftests/user_events: Test struct size match cases
tracing/user_events: Fix struct arg size match check
x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
arm64: ftrace: Add direct call trampoline samples support
samples: ftrace: Save required argument registers in sample trampolines
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZK/pZgAKCRCAXGG7T9hj
vmQlAQD/xi8BUlCe0a7l6kf7+nMkOWmvpVIrmdxrqQ1Wj4c9FAEA0FuI+XXz2sow
ov+il7z3UnViGsieeSHTW+Gxdn6Blgc=
=LzAo
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a cleanup of the Xen related ELF-notes
- a fix for virtio handling in Xen dom0 when running Xen in a VM
* tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent
x86/Xen: tidy xen-head.S
- sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
- sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
- sh: mach-highlander: Handle virq offset in cascaded IRL demux
- sh: mach-r2d: Handle virq offset in cascaded IRL demux
-----BEGIN PGP SIGNATURE-----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=9yTF
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh fixes from John Paul Adrian Glaubitz:
"The sh updates introduced multiple regressions.
In particular, the change a8ac296114 ("sh: Avoid using IRQ0 on SH3
and SH4") causes several boards to hang during boot due to incorrect
IRQ numbers.
Geert Uytterhoeven has contributed patches that handle the virq offset
in the IRQ code for the dreamcast, highlander and r2d boards while
Artur Rojek has contributed a patch which handles the virq offset for
the hd64461 companion chip"
* tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
sh: mach-highlander: Handle virq offset in cascaded IRL demux
sh: mach-r2d: Handle virq offset in cascaded IRL demux
- Don't require quirk to use duplicate namespace identifiers
(Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)
-----BEGIN PGP SIGNATURE-----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=focK
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.5-2023-07-13' of git://git.infradead.org/nvme into block-6.5
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.5
- Don't require quirk to use duplicate namespace identifiers
(Christoph, Sagi)
- One more BOGUS_NID quirk (Pankaj)
- IO timeout and error hanlding fixes for PCI (Keith)
- Enhanced metadata format mask fix (Ankit)
- Association race condition fix for fibre channel (Michael)
- Correct debugfs error checks (Minjie)
- Use PAGE_SECTORS_SHIFT where needed (Damien)
- Reduce kernel logs for legacy nguid attribute (Keith)
- Use correct dma direction when unmapping metadata (Ming)"
* tag 'nvme-6.5-2023-07-13' of git://git.infradead.org/nvme:
nvme-pci: fix DMA direction of unmapping integrity data
nvme: don't reject probe due to duplicate IDs for single-ported PCIe devices
nvme: ensure disabling pairs with unquiesce
nvme-fc: fix race between error recovery and creating association
nvme-fc: return non-zero status code when fails to create association
nvme: fix parameter check in nvme_fault_inject_init()
nvme: warn only once for legacy uuid attribute
nvme: fix the NVME_ID_NS_NVM_STS_MASK definition
nvmet: use PAGE_SECTORS_SHIFT
nvme: add BOGUS_NID quirk for Samsung SM953
The iocost rely on rq start_time_ns and alloc_time_ns to tell saturation
state of the block device. Most of the time request is allocated after
rq_qos_throttle() and its alloc_time_ns or start_time_ns won't be affected.
But for plug batched allocation introduced by the commit 47c122e35d
("block: pre-allocate requests if plug is started and is a batch"), we can
rq_qos_throttle() after the allocation of the request. This is what the
blk_mq_get_cached_request() does.
In this case, the cached request alloc_time_ns or start_time_ns is much
ahead if blocked in any qos ->throttle().
Fix it by setting alloc_time_ns and start_time_ns to now when the allocated
request is actually used.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230710105516.2053478-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An otherwise correct change to the atomic operations uncovered an
existing bug in the sparc __arch_xchg() function, which is calls
__xchg_called_with_bad_pointer() when its arguments are unknown at
compile time:
ERROR: modpost: "__xchg_called_with_bad_pointer" [lib/atomic64_test.ko] undefined!
This now happens because gcc determines that it's better to not inline the
function. Avoid this by just marking the function as __always_inline
to force the compiler to do the right thing here.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/c525adc9-6623-4660-8718-e0c9311563b8@roeck-us.net/
Fixes: d12157efc8 ("locking/atomic: make atomic*_{cmp,}xchg optional")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230628094938.2318171-1-arnd@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Since the string API is tightly coupled with FORTIFY_SOURCE, I am
offering myself up as maintainer for it. Thankfully Andy is already a
reviewer and can keep me on the straight and narrow.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230712194625.never.252-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This reverts commit 2e9906f84f.
It was turned out that commit 2e9906f84f ("tracing: Add "(fault)"
name injection to kernel probes") did not work correctly and probe
events still show just '(fault)' (instead of '"(fault)"'). Also,
current '(fault)' is more explicit that it faulted.
This also moves FAULT_STRING macro to trace.h so that synthetic
event can keep using it, and uses it in trace_probe.c too.
Link: https://lore.kernel.org/all/168908495772.123124.1250788051922100079.stgit@devnote2/
Link: https://lore.kernel.org/all/20230706230642.3793a593@rorschach.local.home/
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
DMA direction should be taken in dma_unmap_page() for unmapping integrity
data.
Fix this DMA direction, and reported in Guangwu's test.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: 4aedb70543 ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
While duplicate IDs are still very harmful, including the potential to easily
see changing devices in /dev/disk/by-id, it turn out they are extremely
common for cheap end user NVMe devices.
Relax our check for them for so that it doesn't reject the probe on
single-ported PCIe devices, but prints a big warning instead. In doubt
we'd still like to see quirk entries to disable the potential for
changing supposed stable device identifier links, but this will at least
allow users how have two (or more) of these devices to use them without
having to manually add a new PCI ID entry with the quirk through sysfs or
by patching the kernel.
Fixes: 2079f41ec6 ("nvme: check that EUI/GUID/UUID are globally unique")
Cc: stable@vger.kernel.org # 6.0+
Co-developed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
ceph_frame_desc::fd_lens is an int array. decode_preamble() thus
effectively casts u32 -> int but the checks for segment lengths are
written as if on unsigned values. While reading in HELLO or one of the
AUTH frames (before authentication is completed), arithmetic in
head_onwire_len() can get duped by negative ctrl_len and produce
head_len which is less than CEPH_PREAMBLE_LEN but still positive.
This would lead to a buffer overrun in prepare_read_control() as the
preamble gets copied to the newly allocated buffer of size head_len.
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Thelford Williams <thelford@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Pedro Tammela says:
====================
net/sched: fixes for sch_qfq
Patch 1 fixes a regression introduced in 6.4 where the MTU size could be
bigger than 'lmax'.
Patch 3 fixes an issue where the code doesn't account for qdisc_pkt_len()
returning a size bigger then 'lmax'.
Patches 2 and 4 are selftests for the issues above.
====================
Link: https://lore.kernel.org/r/20230711210103.597831-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped
by the QFQ qdisc as it can't handle such lengths.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.
Consider the following code in net/sched/sch_qfq.c:
static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
unsigned int len = qdisc_pkt_len(skb), gso_segs;
// ...
if (unlikely(cl->agg->lmax < len)) {
pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
cl->agg->lmax, len, cl->common.classid);
err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
if (err) {
cl->qstats.drops++;
return qdisc_drop(skb, sch, to_free);
}
// ...
}
Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.
This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.
A user may choose virtually any size using such a table.
As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------
We can create the issue with the following commands:
tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2
This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
QFQ only supports a certain bound of MTU size so make sure
we check for this requirement in the tests.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
25369891fc deletes a check for the case where no 'lmax' is
specified which 3037933448 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.
Fixes: 25369891fc ("net/sched: sch_qfq: refactor parsing of netlink parameters")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A recent change to start counting SuperH IRQ #s from 16 breaks support
for the Hitachi HD64461 companion chip.
Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
accommodate for the new virq numbering rules.
Fixes: a8ac296114 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to
an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL
interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon
Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does
not take into account the new virq offset, the interrupt is no longer
translated, leading to an unhandled interrupt.
Fix this by taking into account the virq offset when translating
cascaded IRL interrupts.
Fixes: a8ac296114 ("sh: Avoid using IRQ0 on SH3 and SH4")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Use new cifs_smb_ses_inc_refcount() helper to get an active reference
of @ses and @ses->dfs_root_ses (if set). This will prevent
@ses->dfs_root_ses of being put in the next call to cifs_put_smb_ses()
and thus potentially causing an use-after-free bug.
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
pSMB->hdr.Protocol is an array of size 4 bytes, hence when the compiler
analyzes this line of code
parm_data = ((char *) &pSMB->hdr.Protocol) + offset;
it legitimately complains about the fact that offset points outside the
bounds of the array. Notice that the compiler gives priority to the object
as an array, rather than merely the address of one more byte in a structure
to wich offset should be added (which seems to be the actual intention of
the original implementation).
Fix this by explicitly instructing the compiler to treat the code as a
sequence of bytes in struct smb_com_transaction2_spi_req, and not as an
array accessed through pointer notation.
Notice that ((char *)pSMB) + sizeof(pSMB->hdr.smb_buf_length) points to
the same address as ((char *) &pSMB->hdr.Protocol), therefore this results
in no differences in binary output.
Fixes the following -Wstringop-overflow warnings when built s390
architecture with defconfig (GCC 13):
CC [M] fs/smb/client/cifssmb.o
In function 'cifs_init_ace',
inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2987:31: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2987 | cifs_ace->cifs_e_perm = local_ace->e_perm;
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
In file included from fs/smb/client/cifssmb.c:27:
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [7, 11] into destination object 'Protocol' of size 4
384 | __u8 Protocol[4];
| ^~~~~~~~
In function 'cifs_init_ace',
inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2988:30: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2988 | cifs_ace->cifs_e_tag = local_ace->e_tag;
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [6, 10] into destination object 'Protocol' of size 4
384 | __u8 Protocol[4];
| ^~~~~~~~
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/310
Fixes: dc1af4c4b4 ("cifs: implement set acl method")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=Mt88
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2023-07-12
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 7 files changed, 93 insertions(+), 28 deletions(-).
The main changes are:
1) Fix max stack depth check for async callbacks, from Kumar.
2) Fix inconsistent JIT image generation, from Björn.
3) Use trusted arguments in XDP hints kfuncs, from Larysa.
4) Fix memory leak in cpu_map_update_elem, from Pu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: use trusted arguments in XDP hints kfuncs
bpf: cpumap: Fix memory leak in cpu_map_update_elem
riscv, bpf: Fix inconsistent JIT image generation
selftests/bpf: Add selftest for check_stack_max_depth bug
bpf: Fix max stack depth check for async callbacks
====================
Link: https://lore.kernel.org/r/20230712223045.40182-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c
should return negative error code instead of a positive value count.
Fix this bug by returning correct error code.
Fixes: e3ec7017f6 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/tencent_AD09A61BC4DA92AD1EB0790F5C850E544D07@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some device types like TXGBE_ID_XAUI, *checksum computed in
txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the
limit on the size of *checksum.
Fixes: 049fe53653 ("net: txgbe: Add operations to interact with firmware")
Fixes: 5e2ea7801f ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One fix:
- During the 6.4 cycle my fpu support work broke ABI compatibility in
the sigcontext struct. This was noticed by musl libc developers after
the release. This fix restores the ABI.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmSvDJwACgkQw7McLV5m
J+TdnxAArceU5fQKKtUH+jC2TDVlHFk/6rO9RyEHTxjMLqrACBsIsrbL30B2FfKC
l6vXak/miglOkLxFcGxfd87sgQI2s5esY51tfzRL45yN8fgVtEy0V0m52odB5kFL
GT+tVaKcCjb9nZVUgD62KSYQCP7TghSIlvOM5LGVIEtfgWfnulJZiuV5PMBMJwUi
em1oLmaMXGw5tzZK9P+7WdGcEz9R1iXTDH4SG6Y9J82unFOJd9lvcG0fsA4wkzSg
syvk/rk+WTePQfpgjCHyti/rdx3uhTcvTsFk91lCZCaZnSQtP9ZsZnSv06+T79ir
Tbdo+sKBOiGJ0XqDv3aRQ6qiJeiRs1CoFufMOgC6wTNJONzXF/T7cFjT87Ku49Zm
fn6jnPh0Ne4T16De9e59rn4CxDEVoBcVPOmuEYs0XzaseMHGc1sTAruuE1RaIHu0
QmIoUbbdw0W2nj/65BDO2XuhUf7GpL/8BkjxZvF+U5WO30KyUyu5Wt9OB8hpzoqS
3hlncLRI6/HO6mb5zwBx98BDSr4GEuUOYQMte5lLfxpSAJPCNzBm27oDEjnTgDf3
uWilzFOuKYF4iI4a7qYuCL0crMvxO9zR+mZInqp3F/1bDfkA/FFYYDFWiOJBoYNL
yo2bUf2QzvOeYnGG/Vr3rND0r/TZSaoDdfXrKgtt6uuguvOTCWw=
=f5OV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC fix from Stafford Horne:
- During the 6.4 cycle my fpu support work broke ABI compatibility in
the sigcontext struct. This was noticed by musl libc developers after
the release. This fix restores the ABI.
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI
Hist triggers can have referenced variables without having direct
variables fields. This can be the case if referenced variables are added
for trigger actions. In this case the newly added references will not
have field variables. Not taking such referenced variables into
consideration can result in a bug where it would be possible to remove
hist trigger with variables being refenced. This will result in a bug
that is easily reproducable like so
$ cd /sys/kernel/tracing
$ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events
$ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger
$ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger
$ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger
[ 100.263533] ==================================================================
[ 100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180
[ 100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439
[ 100.266320]
[ 100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4
[ 100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[ 100.268561] Call Trace:
[ 100.268902] <TASK>
[ 100.269189] dump_stack_lvl+0x4c/0x70
[ 100.269680] print_report+0xc5/0x600
[ 100.270165] ? resolve_var_refs+0xc7/0x180
[ 100.270697] ? kasan_complete_mode_report_info+0x80/0x1f0
[ 100.271389] ? resolve_var_refs+0xc7/0x180
[ 100.271913] kasan_report+0xbd/0x100
[ 100.272380] ? resolve_var_refs+0xc7/0x180
[ 100.272920] __asan_load8+0x71/0xa0
[ 100.273377] resolve_var_refs+0xc7/0x180
[ 100.273888] event_hist_trigger+0x749/0x860
[ 100.274505] ? kasan_save_stack+0x2a/0x50
[ 100.275024] ? kasan_set_track+0x29/0x40
[ 100.275536] ? __pfx_event_hist_trigger+0x10/0x10
[ 100.276138] ? ksys_write+0xd1/0x170
[ 100.276607] ? do_syscall_64+0x3c/0x90
[ 100.277099] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 100.277771] ? destroy_hist_data+0x446/0x470
[ 100.278324] ? event_hist_trigger_parse+0xa6c/0x3860
[ 100.278962] ? __pfx_event_hist_trigger_parse+0x10/0x10
[ 100.279627] ? __kasan_check_write+0x18/0x20
[ 100.280177] ? mutex_unlock+0x85/0xd0
[ 100.280660] ? __pfx_mutex_unlock+0x10/0x10
[ 100.281200] ? kfree+0x7b/0x120
[ 100.281619] ? ____kasan_slab_free+0x15d/0x1d0
[ 100.282197] ? event_trigger_write+0xac/0x100
[ 100.282764] ? __kasan_slab_free+0x16/0x20
[ 100.283293] ? __kmem_cache_free+0x153/0x2f0
[ 100.283844] ? sched_mm_cid_remote_clear+0xb1/0x250
[ 100.284550] ? __pfx_sched_mm_cid_remote_clear+0x10/0x10
[ 100.285221] ? event_trigger_write+0xbc/0x100
[ 100.285781] ? __kasan_check_read+0x15/0x20
[ 100.286321] ? __bitmap_weight+0x66/0xa0
[ 100.286833] ? _find_next_bit+0x46/0xe0
[ 100.287334] ? task_mm_cid_work+0x37f/0x450
[ 100.287872] event_triggers_call+0x84/0x150
[ 100.288408] trace_event_buffer_commit+0x339/0x430
[ 100.289073] ? ring_buffer_event_data+0x3f/0x60
[ 100.292189] trace_event_raw_event_sys_enter+0x8b/0xe0
[ 100.295434] syscall_trace_enter.constprop.0+0x18f/0x1b0
[ 100.298653] syscall_enter_from_user_mode+0x32/0x40
[ 100.301808] do_syscall_64+0x1a/0x90
[ 100.304748] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 100.307775] RIP: 0033:0x7f686c75c1cb
[ 100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48
[ 100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021
[ 100.321200] RAX: ffffffffffffffda RBX: 000055f566469ea0 RCX: 00007f686c75c1cb
[ 100.324631] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 000000000000000a
[ 100.328104] RBP: 00007ffc60137ac0 R08: 00007f686c818460 R09: 000000000000000a
[ 100.331509] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009
[ 100.334992] R13: 0000000000000007 R14: 000000000000000a R15: 0000000000000007
[ 100.338381] </TASK>
We hit the bug because when second hist trigger has was created
has_hist_vars() returned false because hist trigger did not have
variables. As a result of that save_hist_vars() was not called to add
the trigger to trace_array->hist_vars. Later on when we attempted to
remove the first histogram find_any_var_ref() failed to detect it is
being used because it did not find the second trigger in hist_vars list.
With this change we wait until trigger actions are created so we can take
into consideration if hist trigger has variable references. Also, now we
check the return value of save_hist_vars() and fail trigger creation if
save_hist_vars() fails.
Link: https://lore.kernel.org/linux-trace-kernel/20230712223021.636335-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------
Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.
[1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/
v1 -> v2: Fix commit message
Fixes: d4b36210c2 ("net: pkt_sched: PIE AQM scheme")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENA adapters on our instances occasionally reset. Once recently
logged a UBSAN failure to console in the process:
UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117
Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017
Workqueue: ena ena_fw_reset_device [ena]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
? __const_udelay+0x43/0x50
ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena]
wait_for_reset_state+0x54/0xa0 [ena]
ena_com_dev_reset+0xc8/0x110 [ena]
ena_down+0x3fe/0x480 [ena]
ena_destroy_device+0xeb/0xf0 [ena]
ena_fw_reset_device+0x30/0x50 [ena]
process_one_work+0x22b/0x3d0
worker_thread+0x4d/0x3f0
? process_one_work+0x3d0/0x3d0
kthread+0x12a/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Apparently, the reset delays are getting so large they can trigger a
UBSAN panic.
Looking at the code, the current timeout is capped at 5000us. Using a
base value of 100us, the current code will overflow after (1<<29). Even
at values before 32, this function wraps around, perhaps
unintentionally.
Cap the value of the exponent used for this backoff at (1<<16) which is
larger than currently necessary, but large enough to support bigger
values in the future.
Cc: stable@vger.kernel.org
Fixes: 4bb7f4cf60 ("net: ena: reduce driver load time")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20230711013621.GE1926@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
stripped all function/variable suffixes started with '.' regardless
of whether those suffixes are generated at LTO mode or not. In fact,
as far as I know, in LTO mode, when a static function/variable is
promoted to the global scope, '.llvm.<...>' suffix is added.
The existing mechanism breaks live patch for a LTO kernel even if
no <symbol>.llvm.<...> symbols are involved. For example, for the following
kernel symbols:
$ grep bpf_verifier_vlog /proc/kallsyms
ffffffff81549f60 t bpf_verifier_vlog
ffffffff8268b430 d bpf_verifier_vlog._entry
ffffffff8282a958 d bpf_verifier_vlog._entry_ptr
ffffffff82e12a1f d bpf_verifier_vlog.__already_done
'bpf_verifier_vlog' is a static function. '_entry', '_entry_ptr' and
'__already_done' are static variables used inside 'bpf_verifier_vlog',
so llvm promotes them to file-level static with prefix 'bpf_verifier_vlog.'.
Note that the func-level to file-level static function promotion also
happens without LTO.
Given a symbol name 'bpf_verifier_vlog', with LTO kernel, current mechanism will
return 4 symbols to live patch subsystem which current live patching
subsystem cannot handle it. With non-LTO kernel, only one symbol
is returned.
In [1], we have a lengthy discussion, the suggestion is to separate two
cases:
(1). new symbols with suffix which are generated regardless of whether
LTO is enabled or not, and
(2). new symbols with suffix generated only when LTO is enabled.
The cleanup_symbol_name() should only remove suffixes for case (2).
Case (1) should not be changed so it can work uniformly with or without LTO.
This patch removed LTO-only suffix '.llvm.<...>' so live patching and
tracing should work the same way for non-LTO kernel.
The cleanup_symbol_name() in scripts/kallsyms.c is also changed to have the same
filtering pattern so both kernel and kallsyms tool have the same
expectation on the order of symbols.
[1] https://lore.kernel.org/live-patching/20230615170048.2382735-1-song@kernel.org/T/#u
Fixes: 6eb4bd92c1 ("kallsyms: strip LTO suffixes from static functions")
Reported-by: Song Liu <song@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628181926.4102448-1-yhs@fb.com
Signed-off-by: Kees Cook <keescook@chromium.org>
- Fix handling of non-unique pin control configuration subnode names
on the RZ/V2M and RZ/G2L SoC families.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZK6cTAAKCRCKwlD9ZEnx
cPlbAPwKp2wIc7pN6vWsepYxPqIdQ5QVL1erZmJiTq+9ePde4AEAyhpMwlJjF7me
4xTv3b9roIyAH0kygOwO9CwWs43cGwg=
=W2Ae
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-fixes-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.5
- Fix handling of non-unique pin control configuration subnode names
on the RZ/V2M and RZ/G2L SoC families.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Debounce handling is done in two different entry points in the driver.
Unify this to make sure that it's always handled the same.
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-5-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl-amd currently tries to program bit 19 of all GPIOs to select
either a 4kΩ or 8hΩ pull up, but this isn't what bit 19 does. Bit
19 is marked as reserved, even in the latest platforms documentation.
Drop this programming functionality.
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-4-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm. This issue doesn't happen on
Windows.
Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.
```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{ // Pin list
0x0007
}
```
On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.
To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.
Reported-by: Nik P <npliashechnikov@gmail.com>
Reported-by: Nathan Schulte <nmschulte@gmail.com>
Reported-by: Friedrich Vock <friedrich.vock@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's uncommon to use debounce on any other pin, but technically
we should only set debounce to 0 when working off GPIO0.
Cc: stable@vger.kernel.org
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 968ab92616 ("pinctrl: amd: Detect internal GPIO0 debounce handling")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230705133005.577-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The stack_trace event is an event created by the tracing subsystem to
store stack traces. It originally just contained a hard coded array of 8
words to hold the stack, and a "size" to know how many entries are there.
This is exported to user space as:
name: kernel_stack
ID: 4
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int size; offset:8; size:4; signed:1;
field:unsigned long caller[8]; offset:16; size:64; signed:0;
print fmt: "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n",i
(void *)REC->caller[0], (void *)REC->caller[1], (void *)REC->caller[2],
(void *)REC->caller[3], (void *)REC->caller[4], (void *)REC->caller[5],
(void *)REC->caller[6], (void *)REC->caller[7]
Where the user space tracers could parse the stack. The library was
updated for this specific event to only look at the size, and not the
array. But some older users still look at the array (note, the older code
still checks to make sure the array fits inside the event that it read.
That is, if only 4 words were saved, the parser would not read the fifth
word because it will see that it was outside of the event size).
This event was changed a while ago to be more dynamic, and would save a
full stack even if it was greater than 8 words. It does this by simply
allocating more ring buffer to hold the extra words. Then it copies in the
stack via:
memcpy(&entry->caller, fstack->calls, size);
As the entry is struct stack_entry, that is created by a macro to both
create the structure and export this to user space, it still had the caller
field of entry defined as: unsigned long caller[8].
When the stack is greater than 8, the FORTIFY_SOURCE code notices that the
amount being copied is greater than the source array and complains about
it. It has no idea that the source is pointing to the ring buffer with the
required allocation.
To hide this from the FORTIFY_SOURCE logic, pointer arithmetic is used:
ptr = ring_buffer_event_data(event);
entry = ptr;
ptr += offsetof(typeof(*entry), caller);
memcpy(ptr, fstack->calls, size);
Link: https://lore.kernel.org/all/20230612160748.4082850-1-svens@linux.ibm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230712105235.5fc441aa@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As comments in ftrace_process_locs(), there may be NULL pointers in
mcount_loc section:
> Some architecture linkers will pad between
> the different mcount_loc sections of different
> object files to satisfy alignments.
> Skip any NULL pointers.
After commit 20e5227e9f ("ftrace: allow NULL pointers in mcount_loc"),
NULL pointers will be accounted when allocating ftrace pages but skipped
before adding into ftrace pages, this may result in some pages not being
used. Then after commit 706c81f87f ("ftrace: Remove extra helper
functions"), warning may occur at:
WARN_ON(pg->next);
To fix it, only warn for case that no pointers skipped but pages not used
up, then free those unused pages after releasing ftrace_lock.
Link: https://lore.kernel.org/linux-trace-kernel/20230712060452.3175675-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 706c81f87f ("ftrace: Remove extra helper functions")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The simple_write_to_buffer() function is designed to handle partial
writes. It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied. This code doesn't check the
return properly. We only know that the first byte is written, the rest
of the buffer might be uninitialized.
There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function. Just use memdup_user() and copy the whole
buffer.
Fixes: d3cbb907ae ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Misc. small fixes and hw-id additions.
The following is an automated git shortlog grouped by driver:
Move s2idle quirk from thinkpad-acpi to amd-pmc:
- Move s2idle quirk from thinkpad-acpi to amd-pmc
dell-ddv:
- Fix mangled list in documentation
- Improve error handling
int3472/discrete:
- set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
platform/x86/amd:
- pmf: Add new ACPI ID AMDI0103
- pmc: Add new ACPI ID AMDI000A
- pmc: Apply nvme quirk to HP 15s-eq2xxx
platform/x86/intel/tpmi:
- Prevent overflow for cap_offset
touchscreen_dmi:
- Add info for the Archos 101 Cesium Educ tablet
wmi:
- Replace open coded guid_parse_and_compare()
- Break possible infinite loop when parsing GUID
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmSufa8UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xNAAf/Z2LnAAGSq6oKO7x9dLxQeuub/Fbn
cMkPlk56gNYJCI0mIuW+cIBf5HOJhgu3oxCvDgbFS+3m2pziB+0nkA5ZdVxeR4na
yRfPzMLg4PuZKbcBzeboNLGlawdHM09J69brfQTao1PLr1iO8qztEk8qGOgyb4Yc
IWtyw5b3ZVQ+sZrdln2ouDMgAMvFYPyJWgZOZOSWfnR6d5AZK3Zvnevqa606NPsA
+ueor3AegQjwJ/uSXw6fpmjnru5XZWEiu08cZifqZbsNS9ExyWNeG51zbF9WjCMi
R8qYkcp6odbWdFzLDW8DELxGctfttlTs5fiTQ/DEn2nyLLNAnLDpEMwZuw==
=f0+L
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"
* tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
platform/x86: dell-ddv: Fix mangled list in documentation
platform/x86: dell-ddv: Improve error handling
platform/x86/amd: pmf: Add new ACPI ID AMDI0103
platform/x86/amd: pmc: Add new ACPI ID AMDI000A
platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
platform/x86/intel/tpmi: Prevent overflow for cap_offset
platform/x86: wmi: Replace open coded guid_parse_and_compare()
platform/x86: wmi: Break possible infinite loop when parsing GUID
- Fix fprobe's rethook release timing issue(1). Release rethook after
ftrace_ops is unregistered so that the rethook is not accessed after
free.
- Fix fprobe's rethook access timing issue(2). Stop rethook before
ftrace_ops is unregistered so that the rethook is NOT keep using
after exiting the unregister_fprobe().
- Fix eprobe cleanup logic. If it attaches to multiple events and failes
to enable one of them, rollback all enabled events correctly.
- Fix fprobe to unlock ftrace recursion lock correctly when it missed
by another running kprobe.
- Cleanup kprobe to remove unnecessary NULL.
- Cleanup kprobe to remove unnecessary 0 initializations.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmStawEbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bMBkIAJYun4zeXsFeUUNVZMP8
UlcyBt/uiB1Ch/t1T1wc55plWIDAvUfN+FEltwhb6MJsQgWEjKJxNcH+oquQeqSH
OkUvV6a8BR73FWbCt1Tm2MQKEG1RHC1R4JCj5GCzP93rQSCnmvr0c1yb6+JKQRx4
aPgWUjDm9vhYlOXS6heHo0hf0MbXDl1kqHjvMU2MXUMk7NtQ2JEo1Whikf7Drl6D
ufNqV54GmtuJhgIWAqSk+qWresRvXy0/5i4ONK1Kmq+pdhssjZ4KFsWFQTIkQzdU
nP8t2EfOp3aglx7ANvEJ+COfFNi0aMnHVBo7BbzsOy7Cq7IZTfD6zOTYSfylGGdA
Uw4=
=RBbc
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Fix fprobe's rethook release issues:
- Release rethook after ftrace_ops is unregistered so that the
rethook is not accessed after free.
- Stop rethook before ftrace_ops is unregistered so that the
rethook is NOT used after exiting unregister_fprobe()
- Fix eprobe cleanup logic. If it attaches to multiple events and
failes to enable one of them, rollback all enabled events correctly.
- Fix fprobe to unlock ftrace recursion lock correctly when it missed
by another running kprobe.
- Cleanup kprobe to remove unnecessary NULL.
- Cleanup kprobe to remove unnecessary 0 initializations.
* tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free()
kernel: kprobes: Remove unnecessary ‘0’ values
kprobes: Remove unnecessary ‘NULL’ values from correct_ret_addr
fprobe: add unlock to match a succeeded ftrace_test_recursion_trylock
kernel/trace: Fix cleanup logic of enable_trace_eprobe
fprobe: Release rethook after the ftrace_ops is unregistered
-----BEGIN PGP SIGNATURE-----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=Syiu
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)
- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
Bergmann)
- a quick HID kselftests script fix for our CI to be happy (Benjamin
Tissoires)
- various fixes and additions of device IDs
* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Fix for shift-out-of-bounds
HID: amd_sfh: Rename the float32 variable
HID: input: fix mapping for camera access keys
HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
HID: hyperv: avoid struct memcpy overrun warning
selftests: hid: fix vmtests.sh not running make headers
Linus Torvalds
Jens Axboe
Chengming Zhou
Arnd Bergmann
Kees Cook
Masami Hiramatsu (Google)
Ming Lei
Christoph Hellwig
Zheng Yejian
Ilya Dryomov
Paolo Abeni
Pedro Tammela
Artur Rojek
Geert Uytterhoeven
Paulo Alcantara
Gustavo A. R. Silva
Jakub Kicinski
Felix Fietkau
Zhang Shurong
Jiawen Wu
Mohamed Khalfella
Krister Johansen
Yonghong Song
Linus Walleij
Mario Limonciello
Steven Rostedt (Google)
Karol Herbst
Dan Carpenter