Граф коммитов

141 Коммитов

Автор SHA1 Сообщение Дата
Roel Kluin bd05f28e1a cfg80211: test before subtraction on unsigned
freq_diff is unsigned, so test before subtraction

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-06 15:54:32 -05:00
Luis R. Rodriguez 667ecd010d cfg80211: print correct intersected regulatory domain
When CONFIG_CFG80211_REG_DEBUG is enabled and an intersection
occurs we are printing the regulatory domain passed by CRDA
and indicating its the intersected regulatory domain. Lets fix
this and print the intersection as originally intended.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:46:43 -05:00
Luis R. Rodriguez 615aab4b75 cfg80211: Fix sanity check on 5 GHz when processing country IE
This fixes two issues with the sanity check loop when processing
the country IE:

1. Do not use frequency for the current subband channel check,
   this was a big fat typo.
2. Apply the 5 GHz 4-channel steps when considering max channel
   on each subband as was done with a recent patch.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29 15:46:43 -05:00
Luis R. Rodriguez 02e68a3da0 cfg80211: Fix parsed country IE info for 5 GHz
The country IE number of channels on 5 GHz specifies the number
of 5 GHz channels, not the number of sequential channel numbers.
For example, if in a country IEs if the first channel given is 36
and the number of channels passed is 4 then the individual channel
numbers defined for the 5 GHz PHY by these parameters

are: 36, 40, 44, 48
not: 36, 37, 38, 39

See: http://tinyurl.com/11d-clarification

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16 17:08:24 -05:00
Luis R. Rodriguez 0c7dc45d21 cfg80211: Fix regression with 11d on bands
This fixes a regression on disallowing bands introduced with the new
802.11d support. The issue is that IEEE-802.11 allows APs to send
a subset of what a country regulatory domain defines. This was clarified
in this document:

http://tinyurl.com/11d-clarification

As such it is possible, and this is what is done in practice, that a
single band 2.4 GHz AP will only send 2.4 GHz band regulatory information
through the 802.11 country information element and then the current
intersection with what CRDA provided yields a regulatory domain with
no 5 GHz information -- even though that country may actually allow
5 GHz operation. We correct this by only applying the intersection rules
on a channel if the the intersection yields a regulatory rule on the
same band the channel is on.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16 17:08:24 -05:00
Luis R. Rodriguez a92a3ce724 cfg80211: make handle_band() and handle_channel() wiphy specific
This allows us to make more wiphy specific judgements when
handling the channels later on.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-16 17:08:24 -05:00
Stephen Hemminger 148bc4303f wireless: convert wireless ioctl to net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-06 10:42:24 -08:00
Sujith 094d05dc32 mac80211: Fix HT channel selection
HT management is done differently for AP and STA modes, unify
to just the ->config() callback since HT is fundamentally a
PHY property and cannot be per-BSS.

Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote
the channel type ( NO_HT, HT20, HT40+, HT40- ).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19 15:22:54 -05:00
Henning Rogge 420e7fabd9 nl80211: Add signal strength and bandwith to nl80211station info
This patch adds signal strength and transmission bitrate
to the station_info of nl80211.

Signed-off-by: Henning Rogge <rogge@fgan.de>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-19 15:04:54 -05:00
Johannes Berg b143923689 mac80211/cfg80211: check endianness in sparse runs
Make sure sparse checks endianness when run on mac80211/cfg80211.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12 14:01:35 -05:00
Johannes Berg 306d6112f9 cfg80211: fix nl80211 frequency handling
Fix two small bugs with HT frequency setting:
 * HT is accepted even when the driver is incapable
 * HT40 is accepted when the driver cannot do 40 MHz
 (both on the selected band)

Also simplify the code a little.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12 13:48:25 -05:00
Nick Andrew 6c5cc8e051 wireless: Fix incorrect use of loose in wext.c
Fix incorrect use of loose in wext.c

It should be 'lose', not 'loose'.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-06 23:55:32 -08:00
Johannes Berg 0f70f39846 cfg80211: "fix" 11d oops
This "fixes" the 11d oops I was seeing. This needs some more work but I
cannot work on it now.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:46 -05:00
Johannes Berg 4a4f4d805d cfg80211: fix wiphy remove if no regulatory request
Fixes the segfault I just pointed out.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:35:45 -05:00
Johannes Berg e60c7744f8 cfg80211: handle SIOCGIWMODE/SIOCSIWMODE
further reducing wext code in mac80211.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:32:58 -05:00
Johannes Berg fee52678db cfg80211: handle SIOCGIWNAME
This patch moves the SIOCGIWNAME handling from mac80211 to cfg80211.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:32:13 -05:00
Jouni Malinen 72bdcf3438 nl80211: Add frequency configuration (including HT40)
This patch adds new NL80211_CMD_SET_WIPHY attributes
NL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow
userspace to set the operating channel (e.g., hostapd for AP mode).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:32:11 -05:00
Jouni Malinen bf8c1ac6d8 nl80211: Change max TX power to be in mBm instead of dBm
In order to be consistent with NL80211_ATTR_POWER_RULE_MAX_EIRP,
change NL80211_FREQUENCY_ATTR_MAX_TX_POWER to use mBm and U32 instead
of dBm and U8. This is a userspace interface change, but the previous
version had not yet been pushed upstream and there are no userspace
programs using this yet, so there is justification to get this change in
as long as it goes in before the previous version gets out.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:48 -05:00
Jouni Malinen e2f367f269 nl80211: Report max TX power in NL80211_BAND_ATTR_FREQS
This is useful information to provide for userspace (e.g., hostapd needs
this to generate Country IE).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26 09:47:41 -05:00
Luis R. Rodriguez 14b9815af3 cfg80211: add support for custom firmware regulatory solutions
This adds API to cfg80211 to allow wireless drivers to inform
us if their firmware can handle regulatory considerations *and*
they cannot map these regulatory domains to an ISO / IEC 3166
alpha2. In these cases we skip the first regulatory hint instead
of expecting the driver to build their own regulatory structure,
providing us with an alpha2, or using the reg_notifier().

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:27 -05:00
Luis R. Rodriguez 3f2355cb91 cfg80211/mac80211: Add 802.11d support
This adds country IE parsing to mac80211 and enables its usage
within the new regulatory infrastructure in cfg80211. We parse
the country IEs only on management beacons for the BSSID you are
associated to and disregard the IEs when the country and environment
(indoor, outdoor, any) matches the already processed country IE.

To avoid following misinformed or outdated APs we build and use
a regulatory domain out of the intersection between what the AP
provides us on the country IE and what CRDA is aware is allowed
on the same country.

A secondary device is allowed to follow only the same country IE
as it make no sense for two devices on a system to be in two
different countries.

In the case the AP is using country IEs for an incorrect country
the user may help compliance further by setting the regulatory
domain before or after the IE is parsed and in that case another
intersection will be performed.

CONFIG_WIRELESS_OLD_REGULATORY is supported but requires CRDA
present.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:26 -05:00
Luis R. Rodriguez 88dc1c3f7f cfg80211: mark regdomains with > NL80211_MAX_SUPP_REG_RULES invalid
Lets remain consistent and mark rds with > NL80211_MAX_SUPP_REG_RULES
number of reg rules as invalid in is_valid_rd().

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:25 -05:00
Luis R. Rodriguez 02ba0b3263 cfg80211: call_crda() won't tell us if CRDA was present
kobject_uevent_env() can return an error but it just tells us
if the uvent was built/sent or not, it doesn't tell us anything
about what happened in userspace, whether the udev rule was present
nor does it tell us if CRDA was present or not. So remove
the informative complaint about it assuming it will tell us
such things.

Note that you can determine if CRDA is present after loading cfg80211
by using:

is_old_static_regdom(cfg80211_regdomain)

but this doesn't account for possible user install after initial
boot, and also for when the user uses the static EU regulatory
domain.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:25 -05:00
Luis R. Rodriguez a01ddafd43 cfg80211: expect different rd in cfg80211 when intersecting
When intersecting it is possible that set_regdom() was called
with a regulatory domain which we'll only use as an aid to
build a final regulatory domain.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:24 -05:00
Luis R. Rodriguez b8295acdc3 cfg80211: separate intersection section in __set_regdom()
So far the __set_regdom() code is pretty generic as the
intersection case is fairly straight forward; this will however
change when 802.11d support is added so lets separate intersection
code for now in preparation for 802.11d support.

This patch only has slight functional changes.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:23 -05:00
Luis R. Rodriguez 8375af3ba2 cfg80211: remove switch from __set_regdom()
We have control over the REGDOM_SET_BY_* macros passed
so remove the switch.

This patch has no functional changes.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:22 -05:00
Luis R. Rodriguez 5203cdb6ad cfg80211: remove switch from __regulatory_hint()
We have complete control over REGDOM_SET_BY_* enum passed
down to __regulatory_hint() as such there is no need to
account for unexpected REGDOM_SET_BY_*'s, lets just remove
the switch statement as this code does not change and
won't change even when we add 802.11d support.

This patch has no functional changes.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:22 -05:00
Luis R. Rodriguez 91e9900418 cfg80211: mark negative frequencies as invalid
Regulatory rules with negative frequencies are now
marked as invalid in is_valid_reg_rule().

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-25 16:41:21 -05:00
Johannes Berg 4f6d4d1e36 wireless: clean up sysfs code using %pM
Remove converting the MAC address to a string by a direct byte
conversion and use %pM instead, since the code is now boilerplate
use a macro to define the show functions, and also use the shorter
__ATTR_RO macro to define the attributes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21 11:08:19 -05:00
John W. Linville 2ba4b32ecf lib80211: consolidate crypt init routines
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21 11:08:17 -05:00
John W. Linville 274bfb8dc5 lib80211: absorb crypto bits from net/ieee80211
These bits are shared already between ipw2x00 and hostap, and could
probably be shared both more cleanly and with other drivers.  This
commit simply relocates the code to lib80211 and adjusts the drivers
appropriately.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21 11:08:17 -05:00
Kay Sievers fb28ad3590 net: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 13:55:14 -08:00
Luis R. Rodriguez 5166ccd220 cfg80211: Add kdoc for struct regulatory_request
As regulatory_request gets bigger there will be more questions
of what things means, so clarify documenation for it and
keep track of the special alpha2 codes we use internally
and on the userspace regulatory agents.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:41 -05:00
Luis R. Rodriguez 9c96477d10 cfg80211: Add regulatory domain intersection capability
There are certain scenerios where we require intersecting
two regulatory domains. This adds intersection support.
When we enable 802.11d support we will use this to intersect
the regulatory domain from the AP's country IE and what our
regulatory agent believes is correct for a country.

This patch enables intersection for now in the case where
the last regdomain was set by a country IE which was parsed
and the user then wants to set the regulatory domain. Since
we don't support country IE parsing yet this code path will not
be hit, however this allows us to pave the way for 11d support.

Intersection code has been tested in userspace with CRDA.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:41 -05:00
Luis R. Rodriguez d71aaf6053 cfg80211: a reg rule is invalid if freq diff is 0
A regulatory rule is invalid when the frequency difference
between the end of the frequency range and the start is 0.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:41 -05:00
Jouni Malinen 318884875b nl80211: Add TX queue parameter configuration
Add a new attribute, NL80211_ATTR_WIPHY_TXQ_PARAMS, that can be used with
NL80211_CMD_SET_WIPHY for userspace (e.g., hostapd) to set TX queue
parameters (txop, cwmin, cwmax, aifs).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:40 -05:00
Jouni Malinen 90c97a040d nl80211: Add basic rate configuration for AP mode
Add a new attribute, NL80211_ATTR_BSS_BASIC_RATES, that can be used with
NL80211_CMD_SET_BSS for userspace (e.g., hostapd) to set which rates are
in the basic rate set.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:39 -05:00
Johannes Berg bd81525272 wireless: implement basic rate helper function
This adds a helper function that, given a bitmap of basic
rates and a bitrate returns the response rate for this rate.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:17:35 -05:00
Johannes Berg 2df78167ad wireless: fix a few sparse warnings
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10 15:10:17 -05:00
Johannes Berg 84fa4f43c4 wireless regulatory: move ignore_request
This function is only used once, move it closer to its caller.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:02:32 -04:00
Johannes Berg 2083c4997b wireless: clean up regulatory ignore_request function
This function has a few WARNs that may eventually trigger
when an AP sends rogue beacons, those must be removed. Some
of the comments in the function are also inappropriate as
this function is concerned with the global hint, not a per-
wiphy thing (which a multidomain flag on a wiphy would imply).

I'm convinced that we don't need to do anything to implement
multi-domain capability as 802.11-2007 specifies it because
it makes only two things mandatory:
 * starting of BSS/IBSS must have country information
   (this can easily be done with a mac80211 patch)
 * a STA must adopt the country information (we already have
   the framework for this)

But we don't have anything implemented anyway for now.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:02:31 -04:00
Johannes Berg be3d48106c wireless: remove struct regdom hinting
The code needs to be split out and cleaned up, so as a
first step remove the capability, to add it back in a
subsequent patch as a separate function. Also remove the
publically facing return value of the function and the
wiphy argument. A number of internal functions go from
being generic helpers to just being used for alpha2
setting.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:02:30 -04:00
Johannes Berg d2372b3152 wireless: make regdom passing semantics simpler
The regdom struct is given to the core, so it might as well
free it in error conditions.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:02:30 -04:00
Johannes Berg f3e63db2e5 wireless: remove write-only 'granted' variable
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:56 -04:00
John W. Linville 9387b7caf3 wireless: use individual buffers for printing ssid values
Also change escape_ssid to print_ssid to match print_mac semantics.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:50 -04:00
John W. Linville 2819f8ad6d wireless: escape_ssid should handle non-printables
Also use common backslash sequences like \t, \n, \r, and \\ as well as \0.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:49 -04:00
John W. Linville c5d3dce875 wireless: remove NETWORK_EMPTY_ESSID flag
It is unnecessary and of questionable value.  Also remove
is_empty_ssid, as it is also unnecessary.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:48 -04:00
John W. Linville 7e272fcff6 wireless: consolidate on a single escape_essid implementation
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:46 -04:00
Johannes Berg ac9440a4e4 wireless: fix EU check
http://en.wikipedia.org/wiki/De_Morgan%27s_laws is useful.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:44 -04:00
Johannes Berg f6037d09e2 wireless: get rid of pointless request list
We really only need to know the last request at each point in time.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31 19:00:43 -04:00