Граф коммитов

479 Коммитов

Автор SHA1 Сообщение Дата
Davidlohr Bueso 53dad6d3a8 ipc: fix race with LSMs
Currently, IPC mechanisms do security and auditing related checks under
RCU.  However, since security modules can free the security structure,
for example, through selinux_[sem,msg_queue,shm]_free_security(), we can
race if the structure is freed before other tasks are done with it,
creating a use-after-free condition.  Manfred illustrates this nicely,
for instance with shared mem and selinux:

 -> do_shmat calls rcu_read_lock()
 -> do_shmat calls shm_object_check().
     Checks that the object is still valid - but doesn't acquire any locks.
     Then it returns.
 -> do_shmat calls security_shm_shmat (e.g. selinux_shm_shmat)
 -> selinux_shm_shmat calls ipc_has_perm()
 -> ipc_has_perm accesses ipc_perms->security

shm_close()
 -> shm_close acquires rw_mutex & shm_lock
 -> shm_close calls shm_destroy
 -> shm_destroy calls security_shm_free (e.g. selinux_shm_free_security)
 -> selinux_shm_free_security calls ipc_free_security(&shp->shm_perm)
 -> ipc_free_security calls kfree(ipc_perms->security)

This patch delays the freeing of the security structures after all RCU
readers are done.  Furthermore it aligns the security life cycle with
that of the rest of IPC - freeing them based on the reference counter.
For situations where we need not free security, the current behavior is
kept.  Linus states:

 "... the old behavior was suspect for another reason too: having the
  security blob go away from under a user sounds like it could cause
  various other problems anyway, so I think the old code was at least
  _prone_ to bugs even if it didn't have catastrophic behavior."

I have tested this patch with IPC testcases from LTP on both my
quad-core laptop and on a 64 core NUMA server.  In both cases selinux is
enabled, and tests pass for both voluntary and forced preemption models.
While the mentioned races are theoretical (at least no one as reported
them), I wanted to make sure that this new logic doesn't break anything
we weren't aware of.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 09:36:53 -07:00
Davidlohr Bueso 20b8875abc ipc: drop ipc_lock_check
No remaining users, we now use ipc_obtain_object_check().

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:45 -07:00
Davidlohr Bueso 7a25dd9e04 ipc, shm: drop shm_lock_check
This function was replaced by a the lockless shm_obtain_object_check(),
and no longer has any users.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:44 -07:00
Davidlohr Bueso 32a2750010 ipc: drop ipc_lock_by_ptr
After previous cleanups and optimizations, this function is no longer
heavily used and we don't have a good reason to keep it.  Update the few
remaining callers and get rid of it.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:44 -07:00
Davidlohr Bueso 530fcd16d8 ipc, shm: guard against non-existant vma in shmdt(2)
When !CONFIG_MMU there's a chance we can derefence a NULL pointer when the
VM area isn't found - check the return value of find_vma().

Also, remove the redundant -EINVAL return: retval is set to the proper
return code and *only* changed to 0, when we actually unmap the segments.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:44 -07:00
Davidlohr Bueso 05603c44a7 ipc: document general ipc locking scheme
As suggested by Andrew, add a generic initial locking scheme used
throughout all sysv ipc mechanisms.  Documenting the ids rwsem, how rcu
can be enough to do the initial checks and when to actually acquire the
kern_ipc_perm.lock spinlock.

I found that adding it to util.c was generic enough.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:43 -07:00
Davidlohr Bueso 4718787d1f ipc,msg: drop msg_unlock
There is only one user left, drop this function and just call
ipc_unlock_object() and rcu_read_unlock().

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:42 -07:00
Davidlohr Bueso d9a605e40b ipc: rename ids->rw_mutex
Since in some situations the lock can be shared for readers, we shouldn't
be calling it a mutex, rename it to rwsem.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:42 -07:00
Davidlohr Bueso c2c737a046 ipc,shm: shorten critical region for shmat
Similar to other system calls, acquire the kern_ipc_perm lock after doing
the initial permission and security checks.

[sasha.levin@oracle.com: dont leave do_shmat with rcu lock held]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:42 -07:00
Davidlohr Bueso f42569b138 ipc,shm: cleanup do_shmat pasta
Clean up some of the messy do_shmat() spaghetti code, getting rid of
out_free and out_put_dentry labels.  This makes shortening the critical
region of this function in the next patch a little easier to do and read.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:42 -07:00
Davidlohr Bueso 2caacaa82a ipc,shm: shorten critical region for shmctl
With the *_INFO, *_STAT, IPC_RMID and IPC_SET commands already optimized,
deal with the remaining SHM_LOCK and SHM_UNLOCK commands.  Take the
shm_perm lock after doing the initial auditing and security checks.  The
rest of the logic remains unchanged.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:41 -07:00
Davidlohr Bueso c97cb9ccab ipc,shm: make shmctl_nolock lockless
While the INFO cmd doesn't take the ipc lock, the STAT commands do acquire
it unnecessarily.  We can do the permissions and security checks only
holding the rcu lock.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:39 -07:00
Davidlohr Bueso 68eccc1dc3 ipc,shm: introduce shmctl_nolock
Similar to semctl and msgctl, when calling msgctl, the *_INFO and *_STAT
commands can be performed without acquiring the ipc object.

Add a shmctl_nolock() function and move the logic of *_INFO and *_STAT out
of msgctl().  Since we are just moving functionality, this change still
takes the lock and it will be properly lockless in the next patch.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:39 -07:00
Davidlohr Bueso 3b1c4ad377 ipc: drop ipcctl_pre_down
Now that sem, msgque and shm, through *_down(), all use the lockless
variant of ipcctl_pre_down(), go ahead and delete it.

[akpm@linux-foundation.org: fix function name in kerneldoc, cleanups]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:39 -07:00
Davidlohr Bueso 79ccf0f8c8 ipc,shm: shorten critical region in shmctl_down
Instead of holding the ipc lock for the entire function, use the
ipcctl_pre_down_nolock and only acquire the lock for specific commands:
RMID and SET.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:39 -07:00
Davidlohr Bueso 8b8d52ac38 ipc,shm: introduce lockless functions to obtain the ipc object
This is the third and final patchset that deals with reducing the amount
of contention we impose on the ipc lock (kern_ipc_perm.lock).  These
changes mostly deal with shared memory, previous work has already been
done for semaphores and message queues:

  http://lkml.org/lkml/2013/3/20/546 (sems)
  http://lkml.org/lkml/2013/5/15/584 (mqueues)

With these patches applied, a custom shm microbenchmark stressing shmctl
doing IPC_STAT with 4 threads a million times, reduces the execution
time by 50%.  A similar run, this time with IPC_SET, reduces the
execution time from 3 mins and 35 secs to 27 seconds.

Patches 1-8: replaces blindly taking the ipc lock for a smarter
combination of rcu and ipc_obtain_object, only acquiring the spinlock
when updating.

Patch 9: renames the ids rw_mutex to rwsem, which is what it already was.

Patch 10: is a trivial mqueue leftover cleanup

Patch 11: adds a brief lock scheme description, requested by Andrew.

This patch:

Add shm_obtain_object() and shm_obtain_object_check(), which will allow us
to get the ipc object without acquiring the lock.  Just as with other
forms of ipc, these functions are basically wrappers around
ipc_obtain_object*().

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:38 -07:00
Linus Torvalds c7c4591db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace changes from Eric Biederman:
 "This is an assorted mishmash of small cleanups, enhancements and bug
  fixes.

  The major theme is user namespace mount restrictions.  nsown_capable
  is killed as it encourages not thinking about details that need to be
  considered.  A very hard to hit pid namespace exiting bug was finally
  tracked and fixed.  A couple of cleanups to the basic namespace
  infrastructure.

  Finally there is an enhancement that makes per user namespace
  capabilities usable as capabilities, and an enhancement that allows
  the per userns root to nice other processes in the user namespace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns:  Kill nsown_capable it makes the wrong thing easy
  capabilities: allow nice if we are privileged
  pidns: Don't have unshare(CLONE_NEWPID) imply CLONE_THREAD
  userns: Allow PR_CAPBSET_DROP in a user namespace.
  namespaces: Simplify copy_namespaces so it is clear what is going on.
  pidns: Fix hang in zap_pid_ns_processes by sending a potentially extra wakeup
  sysfs: Restrict mounting sysfs
  userns: Better restrictions on when proc and sysfs can be mounted
  vfs: Don't copy mount bind mounts of /proc/<pid>/ns/mnt between namespaces
  kernel/nsproxy.c: Improving a snippet of code.
  proc: Restrict mounting the proc filesystem
  vfs: Lock in place mounts from more privileged users
2013-09-07 14:35:32 -07:00
Manfred Spraul bebcb928c8 ipc/msg.c: Fix lost wakeup in msgsnd().
The check if the queue is full and adding current to the wait queue of
pending msgsnd() operations (ss_add()) must be atomic.

Otherwise:
 - the thread that performs msgsnd() finds a full queue and decides to
   sleep.
 - the thread that performs msgrcv() first reads all messages from the
   queue and then sleeps, because the queue is empty.
 - the msgrcv() calls do not perform any wakeups, because the msgsnd()
   task has not yet called ss_add().
 - then the msgsnd()-thread first calls ss_add() and then sleeps.

Net result: msgsnd() and msgrcv() both sleep forever.

Observed with msgctl08 from ltp with a preemptible kernel.

Fix: Call ipc_lock_object() before performing the check.

The patch also moves security_msg_queue_msgsnd() under ipc_lock_object:
 - msgctl(IPC_SET) explicitely mentions that it tries to expunge any
   pending operations that are not allowed anymore with the new
   permissions.  If security_msg_queue_msgsnd() is called without locks,
   then there might be races.
 - it makes the patch much simpler.

Reported-and-tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: stable@vger.kernel.org  # for 3.11
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-03 10:42:56 -07:00
Eric W. Biederman c7b96acf14 userns: Kill nsown_capable it makes the wrong thing easy
nsown_capable is a special case of ns_capable essentially for just CAP_SETUID and
CAP_SETGID.  For the existing users it doesn't noticably simplify things and
from the suggested patches I have seen it encourages people to do the wrong
thing.  So remove nsown_capable.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-08-30 23:44:11 -07:00
Svenning Sørensen 368ae537e0 IPC: bugfix for msgrcv with msgtyp < 0
According to 'man msgrcv': "If msgtyp is less than 0, the first message of
the lowest type that is less than or equal to the absolute value of msgtyp
shall be received."

Bug: The kernel only returns a message if its type is 1; other messages
with type < abs(msgtype) will never get returned.

Fix: After having traversed the list to find the first message with the
lowest type, we need to actually return that message.

This regression was introduced by commit daaf74cf08 ("ipc: refactor
msg list search into separate function")

Signed-off-by: Svenning Soerensen <sss@secomea.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-28 19:26:38 -07:00
Manfred Spraul 758a6ba39e ipc/sem.c: rename try_atomic_semop() to perform_atomic_semop(), docu update
Cleanup: Some minor points that I noticed while writing the previous
patches

1) The name try_atomic_semop() is misleading: The function performs the
   operation (if it is possible).

2) Some documentation updates.

No real code change, a rename and documentation changes.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Manfred Spraul d12e1e50e4 ipc/sem.c: replace shared sem_otime with per-semaphore value
sem_otime contains the time of the last semaphore operation that
completed successfully.  Every operation updates this value, thus access
from multiple cpus can cause thrashing.

Therefore the patch replaces the variable with a per-semaphore variable.
The per-array sem_otime is only calculated when required.

No performance improvement on a single-socket i3 - only important for
larger systems.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Manfred Spraul f269f40ad5 ipc/sem.c: always use only one queue for alter operations
There are two places that can contain alter operations:
 - the global queue: sma->pending_alter
 - the per-semaphore queues: sma->sem_base[].pending_alter.

Since one of the queues must be processed first, this causes an odd
priorization of the wakeups: complex operations have priority over
simple ops.

The patch restores the behavior of linux <=3.0.9: The longest waiting
operation has the highest priority.

This is done by using only one queue:
 - if there are complex ops, then sma->pending_alter is used.
 - otherwise, the per-semaphore queues are used.

As a side effect, do_smart_update_queue() becomes much simpler: no more
goto logic.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Manfred Spraul 1a82e9e1d0 ipc/sem: separate wait-for-zero and alter tasks into seperate queues
Introduce separate queues for operations that do not modify the
semaphore values.  Advantages:

 - Simpler logic in check_restart().
 - Faster update_queue(): Right now, all wait-for-zero operations are
   always tested, even if the semaphore value is not 0.
 - wait-for-zero gets again priority, as in linux <=3.0.9

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Manfred Spraul f5c936c0f2 ipc/sem.c: cacheline align the semaphore structures
As now each semaphore has its own spinlock and parallel operations are
possible, give each semaphore its own cacheline.

On a i3 laptop, this gives up to 28% better performance:

  #semscale 10 | grep "interleave 2"
  - before:
  Cpus 1, interleave 2 delay 0: 36109234 in 10 secs
  Cpus 2, interleave 2 delay 0: 55276317 in 10 secs
  Cpus 3, interleave 2 delay 0: 62411025 in 10 secs
  Cpus 4, interleave 2 delay 0: 81963928 in 10 secs

  -after:
  Cpus 1, interleave 2 delay 0: 35527306 in 10 secs
  Cpus 2, interleave 2 delay 0: 70922909 in 10 secs <<< + 28%
  Cpus 3, interleave 2 delay 0: 80518538 in 10 secs
  Cpus 4, interleave 2 delay 0: 89115148 in 10 secs <<< + 8.7%

i3, with 2 cores and with hyperthreading enabled.  Interleave 2 in order
use first the full cores.  HT partially hides the delay from cacheline
trashing, thus the improvement is "only" 8.7% if 4 threads are running.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Manfred Spraul 196aa0132f ipc/util.c, ipc_rcu_alloc: cacheline align allocation
Enforce that ipc_rcu_alloc returns a cacheline aligned pointer on SMP.

Rationale:

The SysV sem code tries to move the main spinlock into a seperate
cacheline (____cacheline_aligned_in_smp).  This works only if
ipc_rcu_alloc returns cacheline aligned pointers.  vmalloc and kmalloc
return cacheline algined pointers, the implementation of ipc_rcu_alloc
breaks that.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Davidlohr Bueso 9ad66ae65f ipc: remove unused functions
We can now drop the msg_lock and msg_lock_check functions along with a
bogus comment introduced previously in semctl_down.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso 41a0d523d0 ipc,msg: shorten critical region in msgrcv
do_msgrcv() is the last msg queue function that abuses the ipc lock Take
it only when needed when actually updating msq.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso 3dd1f784ed ipc,msg: shorten critical region in msgsnd
do_msgsnd() is another function that does too many things with the ipc
object lock acquired.  Take it only when needed when actually updating
msq.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso ac0ba20ea6 ipc,msg: make msgctl_nolock lockless
While the INFO cmd doesn't take the ipc lock, the STAT commands do
acquire it unnecessarily.  We can do the permissions and security checks
only holding the rcu lock.

This function now mimics semctl_nolock().

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso a5001a0d97 ipc,msg: introduce lockless functions to obtain the ipc object
Add msq_obtain_object() and msq_obtain_object_check(), which will allow
us to get the ipc object without acquiring the lock.  Just as with
semaphores, these functions are basically wrappers around
ipc_obtain_object*().

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso 2cafed30f1 ipc,msg: introduce msgctl_nolock
Similar to semctl, when calling msgctl, the *_INFO and *_STAT commands
can be performed without acquiring the ipc object.

Add a msgctl_nolock() function and move the logic of *_INFO and *_STAT
out of msgctl().  This change still takes the lock and it will be
properly lockless in the next patch

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso 15724ecb7e ipc,msg: shorten critical region in msgctl_down
Instead of holding the ipc lock for the entire function, use the
ipcctl_pre_down_nolock and only acquire the lock for specific commands:
RMID and SET.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso 7b4cc5d841 ipc: move locking out of ipcctl_pre_down_nolock
This function currently acquires both the rw_mutex and the rcu lock on
successful lookups, leaving the callers to explicitly unlock them,
creating another two level locking situation.

Make the callers (including those that still use ipcctl_pre_down())
explicitly lock and unlock the rwsem and rcu lock.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso cf9d5d78d0 ipc: close open coded spin lock calls
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso 1ca7003ab4 ipc: introduce ipc object locking helpers
Simple helpers around the (kern_ipc_perm *)->lock spinlock.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:27 -07:00
Davidlohr Bueso dbfcd91f06 ipc: move rcu lock out of ipc_addid
This patchset continues the work that began in the sysv ipc semaphore
scaling series, see

  https://lkml.org/lkml/2013/3/20/546

Just like semaphores used to be, sysv shared memory and msg queues also
abuse the ipc lock, unnecessarily holding it for operations such as
permission and security checks.

This patchset mostly deals with mqueues, and while shared mem can be
done in a very similar way, I want to get these patches out in the open
first.  It also does some pending cleanups, mostly focused on the two
level locking we have in ipc code, taking care of ipc_addid() and
ipcctl_pre_down_nolock() - yes there are still functions that need to be
updated as well.

This patch:

Make all callers explicitly take and release the RCU read lock.

This addresses the two level locking seen in newary(), newseg() and
newqueue().  For the last two, explicitly unlock the ipc object and the
rcu lock, instead of calling the custom shm_unlock and msg_unlock
functions.  The next patch will deal with the open coded locking for
->perm.lock

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:26 -07:00
Andrew Morton c103a4dc4a ipc/shmc.c: eliminate ugly 80-col tricks
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:26 -07:00
Jeff Layton 79f6530cb5 audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record
The old audit PATH records for mq_open looked like this:

  type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023

...with the audit related changes that went into 3.7, they now look like this:

  type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"

Both of these look wrong to me.  As Steve Grubb pointed out:

 "What we need is 1 PATH record that identifies the MQ.  The other PATH
  records probably should not be there."

Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting.  With this change, we get
a single PATH record that looks more like this:

  type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
  dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
  obj=unconfined_u:object_r:user_tmpfs_t:s0

In order to do this, a new audit_inode_parent_hidden() function is
added.  If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:19 -07:00
Manfred Spraul ab465df9dd ipc/sem.c: Fix missing wakeups in do_smart_update_queue()
do_smart_update_queue() is called when an operation (semop,
semctl(SETVAL), semctl(SETALL), ...) modified the array.  It must check
which of the sleeping tasks can proceed.

do_smart_update_queue() missed a few wakeups:
 - if a sleeping complex op was completed, then all per-semaphore queues
   must be scanned - not only those that were modified by *sops
 - if a sleeping simple op proceeded, then the global queue must be
   scanned again

And:
 - the test for "|sops == NULL) before scanning the global queue is not
   required: If the global queue is empty, then it doesn't need to be
   scanned - regardless of the reason for calling do_smart_update_queue()

The patch is not optimized, i.e.  even completing a wait-for-zero
operation causes a rescan.  This is done to keep the patch as simple as
possible.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-26 15:14:51 -07:00
Li Zefan 091d0d55b2 shm: fix null pointer deref when userspace specifies invalid hugepage size
Dave reported an oops triggered by trinity:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: newseg+0x10d/0x390
  PGD cf8c1067 PUD cf8c2067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU: 2 PID: 7636 Comm: trinity-child2 Not tainted 3.9.0+#67
  ...
  Call Trace:
    ipcget+0x182/0x380
    SyS_shmget+0x5a/0x60
    tracesys+0xdd/0xe2

This bug was introduced by commit af73e4d950 ("hugetlbfs: fix mmap
failure in unaligned size request").

Reported-by: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Zefan <lizfan@huawei.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-09 14:22:47 -07:00
Rik van Riel de2657f94a ipc,sem: fix semctl(..., GETNCNT)
The semctl GETNCNT returns the number of semops waiting for the
specified semaphore to become nonzero.  After commit 9f1bc2c902
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.

In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-09 14:17:47 -07:00
Rik van Riel ebc2e5e6a4 ipc,sem: fix semctl(..., GETZCNT)
The semctl GETZCNT returns the number of semops waiting for the
specified semaphore to become zero.  After commit 9f1bc2c902
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.

In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.

This bug broke dbench; it works again with this patch applied.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Kent Overstreet <koverstreet@google.com>
Tested-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-09 14:17:47 -07:00
Naoya Horiguchi af73e4d950 hugetlbfs: fix mmap failure in unaligned size request
The current kernel returns -EINVAL unless a given mmap length is
"almost" hugepage aligned.  This is because in sys_mmap_pgoff() the
given length is passed to vm_mmap_pgoff() as it is without being aligned
with hugepage boundary.

This is a regression introduced in commit 40716e2924 ("hugetlbfs: fix
alignment of huge page requests"), where alignment code is pushed into
hugetlb_file_setup() and the variable len in caller side is not changed.

To fix this, this patch partially reverts that commit, and adds
alignment code in caller side.  And it also introduces hstate_sizelog()
in order to get proper hstate to specified hugepage size.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881

[akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: <iceman_dvd@yahoo.com>
Cc: Steven Truelove <steven.truelove@utoronto.ca>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 18:38:27 -07:00
Linus Torvalds 941b0304a7 ipc: simplify rcu_read_lock() in semctl_nolock()
This trivially combines two rcu_read_lock() calls in both sides of a
if-statement into one single one in front of the if-statement.

Split out as an independent cleanup from the previous commit.

Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-04 17:24:59 -07:00
Linus Torvalds c728b9c87b ipc: simplify semtimedop/semctl_main() common error path handling
With various straight RCU lock/unlock movements, one common exit path
pattern had become

	rcu_read_unlock();
	goto out_wakeup;

and in fact there were no cases where we wanted to exit to out_wakeup
_without_ releasing the RCU read lock.

So replace that pattern with "goto out_rcu_wakeup", and remove the old
out_wakeup.

Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-04 17:21:58 -07:00
Linus Torvalds 321310ced2 ipc: move sem_obtain_lock() rcu locking into the only caller
sem_obtain_lock() was another of those functions that returned with the
RCU lock held for reading in the success case.  Move the RCU locking to
the caller (semtimedop()), making it more obvious.  We already did RCU
locking elsewhere in that function.

Side note: why does semtimedop() re-do the semphore lookup after the
sleep, rather than just getting a reference to the semaphore it already
looked up originally?

Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-04 17:20:14 -07:00
Linus Torvalds fbfd1d2862 ipc: fix double sem unlock in semctl error path
Fix another ipc locking buglet introduced by the scalability patches:
when semctl_down() was changed to delay the semaphore locking, one error
path for security_sem_semctl() went through the semaphore unlock logic
even though the semaphore had never been locked.

Introduced by commit 16df3674ef ("ipc,sem: do not hold ipc lock more
than necessary")

Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-04 17:19:59 -07:00
Linus Torvalds 4091fd942e ipc: move the rcu_read_lock() from sem_lock_and_putref() into callers
This is another ipc semaphore locking cleanup, trying to make the
locking more straightforward.  We move the rcu read locking into the
callers of sem_lock_and_putref(), which in general means that we now
mostly do the rcu_read_lock() and rcu_read_unlock() in the same
function.

Mostly.  We still have the ipc_addid/newary/freeary mess, and things
like ipcctl_pre_down_nolock().

Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-04 17:19:39 -07:00
Linus Torvalds 73b29505c3 ipc: sem_putref() does not need the semaphore lock any more
ipc_rcu_putref() uses atomics for the refcount, and the games to lock
and unlock the semaphore just to try to keep the reference counting
working are no longer useful.

Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-04 11:24:21 -07:00