Граф коммитов

1380 Коммитов

Автор SHA1 Сообщение Дата
Tejun Heo 22b886dd10 timers: Use proper base migration in add_timer_on()
Regardless of the previous CPU a timer was on, add_timer_on()
currently simply sets timer->flags to the new CPU.  As the caller must
be seeing the timer as idle, this is locally fine, but the timer
leaving the old base while unlocked can lead to race conditions as
follows.

Let's say timer was on cpu 0.

  cpu 0					cpu 1
  -----------------------------------------------------------------------------
  del_timer(timer) succeeds
					del_timer(timer)
					  lock_timer_base(timer) locks cpu_0_base
  add_timer_on(timer, 1)
    spin_lock(&cpu_1_base->lock)
    timer->flags set to cpu_1_base
    operates on @timer			  operates on @timer

This triggered with mod_delayed_work_on() which contains
"if (del_timer()) add_timer_on()" sequence eventually leading to the
following oops.

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810ca6e9>] detach_if_pending+0x69/0x1a0
  ...
  Workqueue: wqthrash wqthrash_workfunc [wqthrash]
  task: ffff8800172ca680 ti: ffff8800172d0000 task.ti: ffff8800172d0000
  RIP: 0010:[<ffffffff810ca6e9>]  [<ffffffff810ca6e9>] detach_if_pending+0x69/0x1a0
  ...
  Call Trace:
   [<ffffffff810cb0b4>] del_timer+0x44/0x60
   [<ffffffff8106e836>] try_to_grab_pending+0xb6/0x160
   [<ffffffff8106e913>] mod_delayed_work_on+0x33/0x80
   [<ffffffffa0000081>] wqthrash_workfunc+0x61/0x90 [wqthrash]
   [<ffffffff8106dba8>] process_one_work+0x1e8/0x650
   [<ffffffff8106e05e>] worker_thread+0x4e/0x450
   [<ffffffff810746af>] kthread+0xef/0x110
   [<ffffffff8185980f>] ret_from_fork+0x3f/0x70

Fix it by updating add_timer_on() to perform proper migration as
__mod_timer() does.

Reported-and-tested-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Worley <chris.worley@primarydata.com>
Cc: bfields@fieldses.org
Cc: Michael Skralivetsky <michael.skralivetsky@primarydata.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20151029103113.2f893924@tlielax.poochiereds.net
Link: http://lkml.kernel.org/r/20151104171533.GI5749@mtj.duckdns.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-04 20:23:19 +01:00
Linus Torvalds 7b2a4306f9 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "The timer departement provides:

   - More y2038 work in the area of ntp and pps.

   - Optimization of posix cpu timers

   - New time related selftests

   - Some new clocksource drivers

   - The usual pile of fixes, cleanups and improvements"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  timeconst: Update path in comment
  timers/x86/hpet: Type adjustments
  clocksource/drivers/armada-370-xp: Implement ARM delay timer
  clocksource/drivers/tango_xtal: Add new timer for Tango SoCs
  clocksource/drivers/imx: Allow timer irq affinity change
  clocksource/drivers/exynos_mct: Use container_of() instead of this_cpu_ptr()
  clocksource/drivers/h8300_*: Remove unneeded memset()s
  clocksource/drivers/sh_cmt: Remove unneeded memset() in sh_cmt_setup()
  clocksource/drivers/em_sti: Remove unneeded memset()s
  clocksource/drivers/mediatek: Use GPT as sched clock source
  clockevents/drivers/mtk: Fix spurious interrupt leading to crash
  posix_cpu_timer: Reduce unnecessary sighand lock contention
  posix_cpu_timer: Convert cputimer->running to bool
  posix_cpu_timer: Check thread timers only when there are active thread timers
  posix_cpu_timer: Optimize fastpath_timer_check()
  timers, kselftest: Add 'adjtick' test to validate adjtimex() tick adjustments
  timers: Use __fls in apply_slack()
  clocksource: Remove return statement from void functions
  net: sfc: avoid using timespec
  ntp/pps: use y2038 safe types in pps_event_time
  ...
2015-11-03 14:13:41 -08:00
Jason A. Donenfeld 03f136a207 timeconst: Update path in comment
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: hofrat@osadl.org
Link: http://lkml.kernel.org/r/1436894685-5868-1-git-send-email-Jason@zx2c4.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-26 10:06:06 +09:00
Thomas Gleixner b2c280bdd6 Merge branch 'fortglx/4.4/time' of https://git.linaro.org/people/john.stultz/linux into timers/core
Time updates from John Stultz:

     - More 2038 work from Arnd Bergmann around ntp and pps
2015-10-20 12:36:37 +02:00
Thomas Gleixner 56fd16caba timekeeping: Increment clock_was_set_seq in timekeeping_init()
timekeeping_init() can set the wall time offset, so we need to
increment the clock_was_set_seq counter. That way hrtimers will pick
up the early offset immediately. Otherwise on a machine which does not
set wall time later in the boot process the hrtimer offset is stale at
0 and wall time timers are going to expire with a delay of 45 years.

Fixes: 868a3e915f "hrtimer: Make offset update smarter"
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stefan Liebler <stli@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
2015-10-16 15:50:22 +02:00
Jason Low c8d75aa47d posix_cpu_timer: Reduce unnecessary sighand lock contention
It was found while running a database workload on large systems that
significant time was spent trying to acquire the sighand lock.

The issue was that whenever an itimer expired, many threads ended up
simultaneously trying to send the signal. Most of the time, nothing
happened after acquiring the sighand lock because another thread
had just already sent the signal and updated the "next expire" time.
The fastpath_timer_check() didn't help much since the "next expire"
time was updated after the threads exit fastpath_timer_check().

This patch addresses this by having the thread_group_cputimer structure
maintain a boolean to signify when a thread in the group is already
checking for process wide timers, and adds extra logic in the fastpath
to check the boolean.

Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: hideaki.kimura@hpe.com
Cc: terry.rudd@hpe.com
Cc: scott.norton@hpe.com
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1444849677-29330-5-git-send-email-jason.low2@hp.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-15 11:23:41 +02:00
Jason Low d5c373eb56 posix_cpu_timer: Convert cputimer->running to bool
In the next patch in this series, a new field 'checking_timer' will
be added to 'struct thread_group_cputimer'. Both this and the
existing 'running' integer field are just used as boolean values. To
save space in the structure, we can make both of these fields booleans.

This is a preparatory patch to convert the existing running integer
field to a boolean.

Suggested-by: George Spelvin <linux@horizon.com>
Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed: George Spelvin <linux@horizon.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: hideaki.kimura@hpe.com
Cc: terry.rudd@hpe.com
Cc: scott.norton@hpe.com
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1444849677-29330-4-git-send-email-jason.low2@hp.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-15 11:23:41 +02:00
Jason Low 934715a191 posix_cpu_timer: Check thread timers only when there are active thread timers
The fastpath_timer_check() contains logic to check for if any timers
are set by checking if !task_cputime_zero(). Similarly, we can do this
before calling check_thread_timers(). In the case where there
are only process-wide timers, this will skip all of the computations for
per-thread timers when there are no per-thread timers.

As suggested by George, we can put the task_cputime_zero() check in
check_thread_timers(), since that is more of an optization to the
function. Similarly, we move the existing check of cputimer->running
to check_process_timers().

Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: hideaki.kimura@hpe.com
Cc: terry.rudd@hpe.com
Cc: scott.norton@hpe.com
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1444849677-29330-3-git-send-email-jason.low2@hp.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-15 11:23:41 +02:00
Jason Low 7c177d994e posix_cpu_timer: Optimize fastpath_timer_check()
In fastpath_timer_check(), the task_cputime() function is always
called to compute the utime and stime values. However, this is not
necessary if there are no per-thread timers to check for. This patch
modifies the code such that we compute the task_cputime values only
when there are per-thread timers set.

Signed-off-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: George Spelvin <linux@horizon.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: hideaki.kimura@hpe.com
Cc: terry.rudd@hpe.com
Cc: scott.norton@hpe.com
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1444849677-29330-2-git-send-email-jason.low2@hp.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-15 11:23:41 +02:00
Ingo Molnar b9f27c0f4f Linux 4.3-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWGqXxAAoJEHm+PkMAQRiGP80H+wX+0PTYpCNaH09LpvlRVZvM
 vG3RnqIYQ8cyOrJJEoVqLznm4vRmw3GrbHxhzDEVrX1beXNVRJdqyZUOttQuDuyS
 A/NWGaZCcu45VcL08NVMCqYv9D7HwDxe5WOhXigo2QX4nlbmJsBoU24ibV35nGYT
 2xdhEwHIH3X+qlzp8Mya6mheYHO+eZ6C+jSy7dYjQoXto0Acz6SoGC6/lhsV4biw
 ENRTJY7y+wzG6ND2PrjF6QV0SwCDAU/f7KcYe01+wm74/uCLYgQuUOPRUeu6ydfN
 Li6CNwN8NzcimLTF4zmQWBte8SkQDVM9LeC8Eyoz2aUYzq7hf6fTfihmQSZnQtQ=
 =vDtg
 -----END PGP SIGNATURE-----

Merge tag 'v4.3-rc5' into timers/core, to pick up fixes before applying new changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-12 09:51:18 +02:00
Rasmus Villemoes 9fc4468d54 timers: Use __fls in apply_slack()
In apply_slack(), find_last_bit() is applied to a bitmask consisting
of precisely BITS_PER_LONG bits. Since mask is non-zero, we might as
well eliminate the function call and use __fls() directly. On x86_64,
this shaves 23 bytes of the only caller, mod_timer().

This also gets rid of Coverity CID 1192106, but that is a false
positive: Coverity is not aware that mask != 0 implies that
find_last_bit will not return BITS_PER_LONG.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1443771931-6284-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-11 22:13:46 +02:00
Guillaume Gomez cfed432d7f clocksource: Remove return statement from void functions
Signed-off-by: Guillaume Gomez <guillaume1.gomez@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/CAAOQCfSDgmqSWDBsetau%2ByF8x0%2BDagCF_pfFw0p5xH_BKkKEog@mail.gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-11 22:13:46 +02:00
Linus Torvalds 37cc7ab1d2 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
 "An abs64() fix in the watchdog driver, and two clocksource driver
  NO_IRQ assumption fixes"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Fix abs() usage w/ 64bit values
  clocksource/drivers/keystone: Fix bad NO_IRQ usage
  clocksource/drivers/rockchip: Fix bad NO_IRQ usage
2015-10-03 10:51:41 -04:00
John Stultz 67dfae0cd7 clocksource: Fix abs() usage w/ 64bit values
This patch fixes one cases where abs() was being used with 64-bit
nanosecond values, where the result may be capped at 32-bits.

This potentially could cause watchdog false negatives on 32-bit
systems, so this patch addresses the issue by using abs64().

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1442279124-7309-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02 22:53:01 +02:00
Arnd Bergmann 5fd96c421f ntp: use timespec64 in sync_cmos_clock
The sync_cmos_clock has one use of struct timespec, which we want to
eventually replace with timespec64 or similar in the kernel. There
is no way this one can overflow, but the conversion to timespec64
is trivial and has no other dependencies.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01 09:59:07 -07:00
Arnd Bergmann 071eee45b1 ntp/pps: replace getnstime_raw_and_real with 64-bit version
There is exactly one caller of getnstime_raw_and_real in the kernel,
which is the pps_get_ts function. This changes the caller and
the implementation to work on timespec64 types rather than timespec,
to avoid the time_t overflow on 32-bit architectures.

For consistency with the other new functions (ktime_get_seconds,
ktime_get_real_*, ...), I'm renaming the function to
ktime_get_raw_and_real_ts64.

We still need to convert from the internal 64-bit type to 32 bit
types in the caller, but this conversion is now pushed out from
getnstime_raw_and_real to pps_get_ts. A follow-up patch changes
the remaining pps code to completely avoid the conversion.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01 09:59:01 -07:00
Arnd Bergmann 7ec88e4be4 ntp/pps: use timespec64 for hardpps()
There is only one user of the hardpps function in the kernel, so
it makes sense to atomically change it over to using 64-bit
timestamps for y2038 safety. In the hardpps implementation,
we also need to change the pps_normtime structure, which is
similar to struct timespec and also requires a 64-bit
seconds portion.

This introduces two temporary variables in pps_kc_event() to
do the conversion, they will be removed again in the next step,
which seemed preferable to having a larger patch changing it
all at the same time.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01 09:57:59 -07:00
Dmitry Vyukov 3ed769bdb2 timers: Fix data race in timer_stats_account_timer()
timer_stats_account_timer() reads timer->start_site, then checks it
for NULL and then re-reads it again, while
timer_stats_timer_clear_start_info() can concurrently reset
timer->start_site to NULL. This should not lead to crashes, but can
double number of entries in timer stats as start_site is used during
comparison, the doubled entries will have unuseful NULL start_site.

Read timer->start_site only once in timer_stats_account_timer().

The data race was found with KernelThreadSanitizer (KTSAN).

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: andreyknvl@google.com
Cc: glider@google.com
Cc: kcc@google.com
Cc: ktsan@googlegroups.com
Cc: john.stultz@linaro.org
Link: http://lkml.kernel.org/r/1442584463-69553-1-git-send-email-dvyukov@google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-22 15:43:18 +02:00
Zhen Lei 571af55a31 time: Fix spelling in comments
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Xinwei Hu <huxinwei@huawei.com>
Cc: Xunlei Pang <pang.xunlei@linaro.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1440484973-13892-1-git-send-email-thunder.leizhen@huawei.com
[ Fixed yet another typo in one of the sentences fixed. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-22 12:54:23 +02:00
Linus Torvalds 1345df21ac Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
 "A fix for an abs()/abs64() bug that caused too slow NTP convergence on
  32-bit kernels, plus a removal of an obsolete clockevents driver
  facility after all users got converted during the merge window"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Remove unused set_mode() callback
  time: Fix timekeeping_freqadjust()'s incorrect use of abs() instead of abs64()
2015-09-17 10:55:25 -07:00
Viresh Kumar eef7635a22 clockevents: Remove unused set_mode() callback
All users are migrated to the per-state callbacks, get rid of the
unused interface and the core support code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linaro-kernel@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/fd60de14cf6d125489c031207567bb255ad946f6.1441943991.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-14 11:00:55 +02:00
John Stultz 2619d7e9c9 time: Fix timekeeping_freqadjust()'s incorrect use of abs() instead of abs64()
The internal clocksteering done for fine-grained error
correction uses a logarithmic approximation, so any time
adjtimex() adjusts the clock steering, timekeeping_freqadjust()
quickly approximates the correct clock frequency over a series
of ticks.

Unfortunately, the logic in timekeeping_freqadjust(), introduced
in commit:

  dc491596f6 ("timekeeping: Rework frequency adjustments to work better w/ nohz")

used the abs() function with a s64 error value to calculate the
size of the approximated adjustment to be made.

Per include/linux/kernel.h:

  "abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()".

Thus on 32-bit platforms, this resulted in the clocksteering to
take a quite dampended random walk trying to converge on the
proper frequency, which caused the adjustments to be made much
slower then intended (most easily observed when large
adjustments are made).

This patch fixes the issue by using abs64() instead.

Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
Tested-by: Nuno Goncalves <nunojpg@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: <stable@vger.kernel.org> # v3.17+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441840051-20244-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-13 10:30:47 +02:00
Frederic Weisbecker 7c8bb6cb95 nohz: Assert existing housekeepers when nohz full enabled
The code ensures that when nohz full is running, at least the
boot CPU serves as a housekeeper and it can't be later offlined.

Let's assert this assumption to make sure that we have CPUs to
handle unbound jobs like workqueues and timers while nohz full
CPUs run undisturbed.

Also improve the comments on housekeeper offlining prevention.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Vatika Harlalka <vatikaharlalka@gmail.com>
Link: http://lkml.kernel.org/r/1441119060-2230-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-02 10:33:22 +02:00
Linus Torvalds 5e359bf221 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Rather large, but nothing exiting:

   - new range check for settimeofday() to prevent that boot time
     becomes negative.
   - fix for file time rounding
   - a few simplifications of the hrtimer code
   - fix for the proc/timerlist code so the output of clock realtime
     timers is accurate
   - more y2038 work
   - tree wide conversion of clockevent drivers to the new callbacks"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits)
  hrtimer: Handle failure of tick_init_highres() gracefully
  hrtimer: Unconfuse switch_hrtimer_base() a bit
  hrtimer: Simplify get_target_base() by returning current base
  hrtimer: Drop return code of hrtimer_switch_to_hres()
  time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64()
  time: Introduce current_kernel_time64()
  time: Introduce struct itimerspec64
  time: Add the common weak version of update_persistent_clock()
  time: Always make sure wall_to_monotonic isn't positive
  time: Fix nanosecond file time rounding in timespec_trunc()
  timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers
  cris/time: Migrate to new 'set-state' interface
  kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
  xtensa/time: Migrate to new 'set-state' interface
  unicore/time: Migrate to new 'set-state' interface
  um/time: Migrate to new 'set-state' interface
  sparc/time: Migrate to new 'set-state' interface
  sh/localtimer: Migrate to new 'set-state' interface
  score/time: Migrate to new 'set-state' interface
  s390/time: Migrate to new 'set-state' interface
  ...
2015-09-01 14:04:50 -07:00
Linus Torvalds 65a99597f0 Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Ingo Molnar:
 "The main changes, mostly written by Frederic Weisbecker, include:

   - Fix some jiffies based cputime assumptions.  (No real harm because
     the concerned code isn't used by full dynticks.)

   - Simplify jiffies <-> usecs conversions.  Remove dead code.

   - Remove early hacks on nohz full code that avoided messing up idle
     nohz internals.  Now nohz integrates well full and idle and such
     hack have become needless.

   - Restart nohz full tick from irq exit.  (A simplification and a
     preparation for future optimization on scheduler kick to nohz
     full)

   - Code cleanups.

   - Tile driver isolation enhancement on top of nohz.  (Chris Metcalf)"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: Remove useless argument on tick_nohz_task_switch()
  nohz: Move tick_nohz_restart_sched_tick() above its users
  nohz: Restart nohz full tick from irq exit
  nohz: Remove idle task special case
  nohz: Prevent tilegx network driver interrupts
  alpha: Fix jiffies based cputime assumption
  apm32: Fix cputime == jiffies assumption
  jiffies: Remove HZ > USEC_PER_SEC special case
2015-08-31 21:04:24 -07:00
Linus Torvalds 7073bc6612 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main RCU changes in this cycle are:

   - the combination of tree geometry-initialization simplifications and
     OS-jitter-reduction changes to expedited grace periods.  These two
     are stacked due to the large number of conflicts that would
     otherwise result.

   - privatize smp_mb__after_unlock_lock().

     This commit moves the definition of smp_mb__after_unlock_lock() to
     kernel/rcu/tree.h, in recognition of the fact that RCU is the only
     thing using this, that nothing else is likely to use it, and that
     it is likely to go away completely.

   - documentation updates.

   - torture-test updates.

   - misc fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  rcu,locking: Privatize smp_mb__after_unlock_lock()
  rcu: Silence lockdep false positive for expedited grace periods
  rcu: Don't disable CPU hotplug during OOM notifiers
  scripts: Make checkpatch.pl warn on expedited RCU grace periods
  rcu: Update MAINTAINERS entry
  rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
  rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
  rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
  rcu: Make rcu_is_watching() really notrace
  cpu: Wait for RCU grace periods concurrently
  rcu: Create a synchronize_rcu_mult()
  rcu: Fix obsolete priority-boosting comment
  rcu: Use WRITE_ONCE in RCU_INIT_POINTER
  rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
  rcu: Add RCU-sched flavors of get-state and cond-sync
  rcu: Add fastpath bypassing funnel locking
  rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
  rcu: Pull out wait_event*() condition into helper function
  documentation: Describe new expedited stall warnings
  rcu: Add stall warnings to synchronize_sched_expedited()
  ...
2015-08-31 18:12:07 -07:00
Guenter Roeck 85e1cd6e76 hrtimer: Handle failure of tick_init_highres() gracefully
Commit 75e3b37d05 ("hrtimer: Drop return code of hrtimer_switch_to_hres()")
drops the return code of hrtimer_switch_to_hres(). While doing so, it also
drops the return statement itself on failure. This may cause a system hang.
Seen when running arm:multi_v7_defconfig in qemu with devicetree file
vexpress-v2p-ca9.

Fixes: 75e3b37d05 ("hrtimer: Drop return code of hrtimer_switch_to_hres()")
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/1440231047-16256-1-git-send-email-linux@roeck-us.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-22 10:57:50 +02:00
Thomas Gleixner 05ddaa4d6d Merge branch 'fortglx/4.3/time' of https://git.linaro.org/people/john.stultz/linux into timers/core
- A handful or y2038 related items
- A walltime to monotonic limit
- Small fixes for timespec_trunc() and timer_list output
2015-08-20 21:13:22 +02:00
Frederic Weisbecker b48362d8aa hrtimer: Unconfuse switch_hrtimer_base() a bit
The variable called "this_base" is confusing because its name suggests
it's of "struct hrtimer_clock_base" type, along with "base" and "new_base"
which doesn't help understanding this complicated function.

Make its name clearer and fix the misleading comment while at it.

[ tglx: Fixed the comment for real ]

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1439907509-9553-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-18 18:36:59 +02:00
Frederic Weisbecker 662b3e1946 hrtimer: Simplify get_target_base() by returning current base
Instead of fetching again the current cpu base, just take it from the
parameter.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1439907509-9553-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-18 18:36:59 +02:00
Eric Dumazet d0023a1448 timer: Write timer->flags atomically
lock_timer_base() cannot prevent the following :

CPU1 ( in __mod_timer()
timer->flags |= TIMER_MIGRATING;
spin_unlock(&base->lock);
base = new_base;
spin_lock(&base->lock);
// The next line clears TIMER_MIGRATING
timer->flags &= ~TIMER_BASEMASK;
                                  CPU2 (in lock_timer_base())
                                  see timer base is cpu0 base
                                  spin_lock_irqsave(&base->lock, *flags);
                                  if (timer->flags == tf)
                                       return base; // oops, wrong base
timer->flags |= base->cpu // too late

We must write timer->flags in one go, otherwise we can fool other cpus.

Fixes: bc7a34b8b9 ("timer: Reduce timer migration overhead if disabled")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Christopherson <jon@jons.org>
Cc: David Miller <davem@davemloft.net>
Cc: xen-devel@lists.xen.org
Cc: david.vrabel@citrix.com
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Link: http://lkml.kernel.org/r/1439831928.32680.11.camel@edumazet-glaptop2.roam.corp.google.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
2015-08-18 15:31:16 +02:00
Luiz Capitulino 75e3b37d05 hrtimer: Drop return code of hrtimer_switch_to_hres()
It's not checked by the caller.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Link: http://lkml.kernel.org/r/20150811164043.538241ef@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-17 23:19:03 +02:00
Baolin Wang 9ca3085060 time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64()
The conversion between struct timespec and jiffies is not year 2038
safe on 32bit systems. Introduce timespec64_to_jiffies() and
jiffies_to_timespec64() functions which use struct timespec64 to
make it ready for 2038 issue.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-08-17 11:25:41 -07:00
Baolin Wang 8758a240e2 time: Introduce current_kernel_time64()
The current_kernel_time() is not year 2038 safe on 32bit systems
since it returns a timespec value. Introduce current_kernel_time64()
which returns a timespec64 value.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-08-17 11:25:35 -07:00
Xunlei Pang 7494e9eede time: Add the common weak version of update_persistent_clock()
The weak update_persistent_clock64() calls update_persistent_clock(),
if the architecture defines an update_persistent_clock64() to replace
and remove its update_persistent_clock() version, when building the
kernel the linker will throw an undefined symbol error, that is, any
arch that switches to update_persistent_clock64() will have this issue.

To solve the issue, we add the common weak update_persistent_clock().

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-08-17 11:25:16 -07:00
Wang YanQing e1d7ba8735 time: Always make sure wall_to_monotonic isn't positive
Two issues were found on an IMX6 development board without an
enabled RTC device(resulting in the boot time and monotonic
time being initialized to 0).

Issue 1:exportfs -a generate:
       "exportfs: /opt/nfs/arm does not support NFS export"
Issue 2:cat /proc/stat:
       "btime 4294967236"

The same issues can be reproduced on x86 after running the
following code:
	int main(void)
	{
	    struct timeval val;
	    int ret;

	    val.tv_sec = 0;
	    val.tv_usec = 0;
	    ret = settimeofday(&val, NULL);
	    return 0;
	}

Two issues are different symptoms of same problem:
The reason is a positive wall_to_monotonic pushes boot time back
to the time before Epoch, and getboottime will return negative
value.

In symptom 1:
          negative boot time cause get_expiry() to overflow time_t
          when input expire time is 2147483647, then cache_flush()
          always clears entries just added in ip_map_parse.
In symptom 2:
          show_stat() uses "unsigned long" to print negative btime
          value returned by getboottime.

This patch fix the problem by prohibiting time from being set to a value which
would cause a negative boot time. As a result one can't set the CLOCK_REALTIME
time prior to (1970 + system uptime).

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wang YanQing <udknight@gmail.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-08-17 11:24:54 -07:00
Karsten Blees de4a95faf1 time: Fix nanosecond file time rounding in timespec_trunc()
timespec_trunc() avoids rounding if granularity <= nanoseconds-per-jiffie
(or TICK_NSEC). This optimization assumes that:

 1. current_kernel_time().tv_nsec is already rounded to TICK_NSEC (i.e.
    with HZ=1000 you'd get 1000000, 2000000, 3000000... but never 1000001).
    This is no longer true (probably since hrtimers introduced in 2.6.16).

 2. TICK_NSEC is evenly divisible by all possible granularities. This may
    be true for HZ=100, 250, 1000, but obviously not for HZ=300 /
    TICK_NSEC=3333333 (introduced in 2.6.20).

Thus, sub-second portions of in-core file times are not rounded to on-disk
granularity. I.e. file times may change when the inode is re-read from disk
or when the file system is remounted.

This affects all file systems with file time granularities > 1 ns and < 1s,
e.g. CEPH (1000 ns), UDF (1000 ns), CIFS (100 ns), NTFS (100 ns) and FUSE
(configurable from user mode via struct fuse_init_out.time_gran).

Steps to reproduce with e.g. UDF:

  $ dd if=/dev/zero of=udfdisk count=10000 && mkudffs udfdisk
  $ mkdir udf && mount udfdisk udf
  $ touch udf/test && stat -c %y udf/test
  2015-06-09 10:22:56.130006767 +0200
  $ umount udf && mount udfdisk udf
  $ stat -c %y udf/test
  2015-06-09 10:22:56.130006000 +0200

Remounting truncates the mtime to 1 µs.

Fix the rounding in timespec_trunc() and update the documentation.

timespec_trunc() is exclusively used to calculate inode's [acm]time (mostly
via current_fs_time()), and always with super_block.s_time_gran as second
argument. So this can safely be changed without side effects.

Note: This does _not_ fix the issue for FAT's 2 second mtime resolution,
as super_block.s_time_gran isn't prepared to handle different ctime /
mtime / atime resolutions nor resolutions > 1 second.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-08-17 11:23:46 -07:00
John Stultz 38bf985b05 timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers
I noticed for non-monotonic timers in timer_list, some of the
output looked a little confusing.

For example:
 #1: <0000000000000000>, posix_timer_fn, S:01, hrtimer_start_range_ns, leap-a-day/2360
 # expires at 1434412800000000000-1434412800000000000 nsecs [in 1434410725062375469 to 1434410725062375469 nsecs]

You'll note the relative time till the expiration "[in xxx to
yyy nsecs]" is incorrect. This is because its printing the delta
between CLOCK_MONOTONIC time to the CLOCK_REALTIME expiration.

This patch fixes this issue by adding the clock offset to the
"now" time which we use to calculate the delta.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-08-17 11:23:31 -07:00
Ingo Molnar 9b9412dc70 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:

  - The combination of tree geometry-initialization simplifications
    and OS-jitter-reduction changes to expedited grace periods.
    These two are stacked due to the large number of conflicts
    that would otherwise result.

    [ With one addition, a temporary commit to silence a lockdep false
      positive. Additional changes to the expedited grace-period
      primitives (queued for 4.4) remove the cause of this false
      positive, and therefore include a revert of this temporary commit. ]

  - Documentation updates.

  - Torture-test updates.

  - Miscellaneous fixes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-12 12:12:12 +02:00
Viresh Kumar ecbebcb868 kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
Migrate broadcast-hrtimer driver to the new 'set-state' interface
provided by clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-08-10 11:41:08 +02:00
Luiz Capitulino d74892c5b2 clockevents: Drop redundant cpumask check in tick_check_new_device()
The same check is performed by tick_check_percpu().

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Link: http://lkml.kernel.org/r/20150729151417.069d1bb0@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-01 12:00:13 +02:00
Frederic Weisbecker de734f89b6 nohz: Remove useless argument on tick_nohz_task_switch()
Leftover from early code.

Cc: Christoph Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-07-29 15:45:01 +02:00
Frederic Weisbecker 59d2c7ca49 nohz: Move tick_nohz_restart_sched_tick() above its users
Fix the function declaration/definition dance.

Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-07-29 15:45:01 +02:00
Frederic Weisbecker 73738a95d0 nohz: Restart nohz full tick from irq exit
Restart the tick when necessary from the irq exit path. It makes nohz
full more flexible, simplify the related IPIs and doesn't bring
significant overhead on irq exit.

In a longer term view, it will allow us to piggyback the nohz kick
on the scheduler IPI in the future instead of sending a dedicated IPI
that often doubles the scheduler IPI on task wakeup. This will require
more changes though including careful review of resched_curr() callers
to include nohz full needs.

Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-07-29 15:45:00 +02:00
Frederic Weisbecker 5944935943 nohz: Remove idle task special case
On nohz full early days, idle dynticks and full dynticks weren't well
integrated and we couldn't risk full dynticks calls on idle without
risking messing up tick idle statistics. This is why we prevented such
thing to happen.

Nowadays full dynticks and idle dynticks are better integrated and
interact without known issue.

So lets remove that.

Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-07-29 15:44:59 +02:00
Frederic Weisbecker e075867681 jiffies: Remove HZ > USEC_PER_SEC special case
HZ never goes much further 1000 and a bit. And if we ever reach one tick
per microsecond, we might be having a problem.

Lets stop maintaining this special case, just leave a paranoid check.

Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc; John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-07-29 15:44:57 +02:00
Thomas Gleixner 0f44705175 tick: Move the export of tick_broadcast_oneshot_control to the proper place
tick_broadcast_oneshot_control got moved from tick-broadcast to
tick-common, but the export stayed in the old place. Fix it up.

Fixes: f32dd11705 'tick/broadcast: Make idle check independent from mode and config'
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-14 12:01:04 +02:00
Thomas Gleixner c4d029f2d4 tick/broadcast: Prevent NULL pointer dereference
Dan reported that the recent changes to the broadcast code introduced
a potential NULL dereference.

Add the proper check.

Fixes: e045431190 "tick/broadcast: Sanity check the shutdown of the local clock_event"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-11 14:26:34 +02:00
Thomas Gleixner c428833481 tick/broadcast: Handle spurious interrupts gracefully
Andriy reported that on a virtual machine the warning about negative
expiry time in the clock events programming code triggered:

hpet: hpet0 irq 40 for MSI
hpet: hpet1 irq 41 for MSI
Switching to clocksource hpet
WARNING: at kernel/time/clockevents.c:239

[<ffffffff810ce6eb>] clockevents_program_event+0xdb/0xf0
[<ffffffff810cf211>] tick_handle_periodic_broadcast+0x41/0x50
[<ffffffff81016525>] timer_interrupt+0x15/0x20

When the second hpet is installed as a per cpu timer the broadcast
event is not longer required and stopped, which sets the next_evt of
the broadcast device to KTIME_MAX.

If after that a spurious interrupt happens on the broadcast device,
then the current code blindly handles it and tries to reprogram the
broadcast device afterwards, which adds the period to
next_evt. KTIME_MAX + period results in a negative expiry value
causing the WARN_ON in the clockevents code to trigger.

Add a proper check for the state of the broadcast device into the
interrupt handler and return if the interrupt is spurious.

[ Folded in pointer fix from Sudeep ]

Reported-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150705205221.802094647@linutronix.de
2015-07-07 18:46:48 +02:00
Thomas Gleixner d5113e13a5 tick/broadcast: Check for hrtimer broadcast active early
If the current cpu is the one which has the hrtimer based broadcast
queued then we better return busy immediately instead of going through
loops and hoops to figure that out.

[ Split out from a larger combo patch ]

Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:48 +02:00
Thomas Gleixner 0cc5281aa5 tick/broadcast: Return busy when IPI is pending
Tell the idle code not to go deep if the broadcast IPI is about to
arrive.

[ Split out from a larger combo patch ]

Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:48 +02:00
Thomas Gleixner d33257264b tick/broadcast: Return busy if periodic mode and hrtimer broadcast
If the system is in periodic mode and the broadcast device is hrtimer
based, return busy as we have no proper handling for this.

[ Split out from a larger combo patch ]

Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:48 +02:00
Thomas Gleixner e3ac79e087 tick/broadcast: Move the check for periodic mode inside state handling
We need to check more than the periodic mode for proper operation in
all runtime combinations. To avoid code duplication move the check
into the enter state handling.

No functional change.

[ Split out from a larger combo patch ]

Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:47 +02:00
Thomas Gleixner b78f3f3c89 tick/broadcast: Prevent deep idle if no broadcast device available
Add a check for a installed broadcast device to the oneshot control
function and return busy if not.

[ Split out from a larger combo patch ]

Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:47 +02:00
Thomas Gleixner f32dd11705 tick/broadcast: Make idle check independent from mode and config
Currently the broadcast busy check, which prevents the idle code from
going into deep idle, works only in one shot mode.

If NOHZ and HIGHRES are off (config or command line) there is no
sanity check at all, so under certain conditions cpus are allowed to
go into deep idle, where the local timer stops, and are not woken up
again because there is no broadcast timer installed or a hrtimer based
broadcast device is not evaluated.

Move tick_broadcast_oneshot_control() into the common code and provide
proper subfunctions for the various config combinations.

The common check in tick_broadcast_oneshot_control() is for the C3STOP
misfeature flag of the local clock event device. If its not set, idle
can proceed. If set, further checks are necessary.

Provide checks for the trivial cases:

 - If broadcast is disabled in the config, then return busy

 - If oneshot mode (NOHZ/HIGHES) is disabled in the config, return
   busy if the broadcast device is hrtimer based.

 - If oneshot mode is enabled in the config call the original
   tick_broadcast_oneshot_control() function. That function needs
   extra checks which will be implemented in seperate patches.

[ Split out from a larger combo patch ]

Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:47 +02:00
Thomas Gleixner e045431190 tick/broadcast: Sanity check the shutdown of the local clock_event
The broadcast code shuts down the local clock event unconditionally
even if no broadcast device is installed or if the broadcast device is
hrtimer based.

Add proper sanity checks.

[ Split out from a larger combo patch ]

Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:47 +02:00
Thomas Gleixner 8eb231261f tick/broadcast: Prevent hrtimer recursion
The hrtimer based broadcast vehicle can cause a hrtimer recursion
which went unnoticed until we changed the hrtimer expiry code to keep
track of the currently running timer.

local_timer_interrupt()
  local_handler()
    hrtimer_interrupt()
      expire_hrtimers()
        broadcast_hrtimer()
	  send_ipis()
	  local_handler()
	    hrtimer_interrupt()
	     ....

Solution is simple: Prevent the local handler call from the broadcast
code when the broadcast 'device' is hrtimer based.

[ Split out from a larger combo patch ]

Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>
Cc: Catalin Marinas <Catalin.Marinas@arm.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 18:46:47 +02:00
Viresh Kumar 7c4a976cd5 clockevents: Allow set-state callbacks to be optional
Its mandatory for the drivers to provide set_state_{oneshot|periodic}()
(only if related modes are supported) and set_state_shutdown() callbacks
today, if they are implementing the new set-state interface.

But this leads to unnecessary noop callbacks for drivers which don't
want to implement them. Over that, it will lead to a full function call
for nothing really useful.

Lets make all set-state callbacks optional.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1436256875-15562-1-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-07 10:44:45 +02:00
Paul E. McKenney d1ec4c34c7 rcu: Drop RCU_USER_QS in favor of NO_HZ_FULL
The RCU_USER_QS Kconfig parameter is now just a synonym for NO_HZ_FULL,
so this commit eliminates RCU_USER_QS, replacing all uses with NO_HZ_FULL.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-07-06 13:52:18 -07:00
Linus Torvalds 6ac15baacb Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "This contains:

   - a build regression fix introduced by the timeconst move

   - a hotplug regression fix introduced by the timer wheel diet

   - a cpu hotplug bug fix for the exynos clocksource driver"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Remove development rules from Kbuild/Makefile
  timer: Fix hotplug regression
  clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier
2015-07-01 15:44:18 -07:00
Linus Torvalds 02201e3f1b Minor merge needed, due to function move.
Main excitement here is Peter Zijlstra's lockless rbtree optimization to
 speed module address lookup.  He found some abusers of the module lock
 doing that too.
 
 A little bit of parameter work here too; including Dan Streetman's breaking
 up the big param mutex so writing a parameter can load another module (yeah,
 really).  Unfortunately that broke the usual suspects, !CONFIG_MODULES and
 !CONFIG_SYSFS, so those fixes were appended too.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVkgKHAAoJENkgDmzRrbjxQpwQAJVmBN6jF3SnwbQXv9vRixjH
 58V33sb1G1RW+kXxQ3/e8jLX/4VaN479CufruXQp+IJWXsN/CH0lbC3k8m7u50d7
 b1Zeqd/Yrh79rkc11b0X1698uGCSMlzz+V54Z0QOTEEX+nSu2ZZvccFS4UaHkn3z
 rqDo00lb7rxQz8U25qro2OZrG6D3ub2q20TkWUB8EO4AOHkPn8KWP2r429Axrr0K
 wlDWDTTt8/IsvPbuPf3T15RAhq1avkMXWn9nDXDjyWbpLfTn8NFnWmtesgY7Jl4t
 GjbXC5WYekX3w2ZDB9KaT/DAMQ1a7RbMXNSz4RX4VbzDl+yYeSLmIh2G9fZb1PbB
 PsIxrOgy4BquOWsJPm+zeFPSC3q9Cfu219L4AmxSjiZxC3dlosg5rIB892Mjoyv4
 qxmg6oiqtc4Jxv+Gl9lRFVOqyHZrTC5IJ+xgfv1EyP6kKMUKLlDZtxZAuQxpUyxR
 HZLq220RYnYSvkWauikq4M8fqFM8bdt6hLJnv7bVqllseROk9stCvjSiE3A9szH5
 OgtOfYV5GhOeb8pCZqJKlGDw+RoJ21jtNCgOr6DgkNKV9CX/kL/Puwv8gnA0B0eh
 dxCeB7f/gcLl7Cg3Z3gVVcGlgak6JWrLf5ITAJhBZ8Lv+AtL2DKmwEWS/iIMRmek
 tLdh/a9GiCitqS0bT7GE
 =tWPQ
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Main excitement here is Peter Zijlstra's lockless rbtree optimization
  to speed module address lookup.  He found some abusers of the module
  lock doing that too.

  A little bit of parameter work here too; including Dan Streetman's
  breaking up the big param mutex so writing a parameter can load
  another module (yeah, really).  Unfortunately that broke the usual
  suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
  appended too"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
  modules: only use mod->param_lock if CONFIG_MODULES
  param: fix module param locks when !CONFIG_SYSFS.
  rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
  module: add per-module param_lock
  module: make perm const
  params: suppress unused variable error, warn once just in case code changes.
  modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
  kernel/module.c: avoid ifdefs for sig_enforce declaration
  kernel/workqueue.c: remove ifdefs over wq_power_efficient
  kernel/params.c: export param_ops_bool_enable_only
  kernel/params.c: generalize bool_enable_only
  kernel/module.c: use generic module param operaters for sig_enforce
  kernel/params: constify struct kernel_param_ops uses
  sysfs: tightened sysfs permission checks
  module: Rework module_addr_{min,max}
  module: Use __module_address() for module_address_lookup()
  module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
  module: Optimize __module_address() using a latched RB-tree
  rbtree: Implement generic latch_tree
  seqlock: Introduce raw_read_seqcount_latch()
  ...
2015-07-01 10:49:25 -07:00
Thomas Gleixner 65f26062cd time: Remove development rules from Kbuild/Makefile
time.o gets rebuilt unconditionally due to a leftover Makefile rule
which was placed there for development purposes.

Remove it along with the commented out always rule in the toplevel
Kbuild file.

Fixes: 0a227985d4 'time: Move timeconst.h into include/generated'
Reported-by; Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
2015-07-01 09:57:35 +02:00
Thomas Gleixner 24bfcb1009 timer: Fix hotplug regression
The recent timer wheel rework removed the get/put_cpu_var() pair in
the hotplug migration code, which results in:

BUG: using smp_processor_id() in preemptible [00000000] code: hib.sh/2845
...
[<ffffffff810d4fa3>] timer_cpu_notify+0x53/0x12

That hunk is a leftover from an earlier iteration and went unnoticed
so far.

Restore the previous code which was obviously correct.

Fixes: 0eeda71bc3 'timer: Replace timer base by a cpu index'
Reported-and_tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-26 22:58:06 +02:00
Linus Torvalds 43c9fad942 Power management and ACPI material for v4.2-rc1
- ACPICA update to upstream revision 20150515 including basic
    support for ACPI 6 features: new ACPI tables introduced by
    ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
    other tables (DTRM, FADT, LPIT, MADT), new predefined names
    (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
    fixes and cleanups (Bob Moore, Lv Zheng).
 
  - ACPI device power management core code update to follow ACPI 6
    which reflects the ACPI device power management implementation
    in Windows (Rafael J Wysocki).
 
  - Rework of the backlight interface selection logic to reduce the
    number of kernel command line options and improve the handling
    of DMI quirks that may be involved in that and to make the
    code generally more straightforward (Hans de Goede).
 
  - Fixes for the ACPI Embedded Controller (EC) driver related to
    the handling of EC transactions (Lv Zheng).
 
  - Fix for a regression related to the ACPI resources management
    and resulting from a recent change of ACPI initialization code
    ordering (Rafael J Wysocki).
 
  - Fix for a system initialization regression related to ACPI
    introduced during the 3.14 cycle and caused by running the
    code that switches the platform over to the ACPI mode too
    early in the initialization sequence (Rafael J Wysocki).
 
  - Support for the ACPI _CCA device configuration object related
    to DMA cache coherence (Suravee Suthikulpanit).
 
  - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
 
  - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
 
  - ACPI processor driver cleanups (Hanjun Guo).
 
  - Cleanups and documentation update related to the ACPI device
    properties interface based on _DSD (Rafael J Wysocki).
 
  - ACPI device power management fixes (Rafael J Wysocki).
 
  - Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
    Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
 
  - Fix for a long-standing issue causing General Protection Faults
    to be generated occasionally on return to user space after resume
    from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
 
  - Fix to make the suspend core code return -EBUSY consistently in
    all cases when system suspend is aborted due to wakeup detection
    (Ruchi Kandoi).
 
  - Support for automated device wakeup IRQ handling allowing drivers
    to make their PM support more starightforward (Tony Lindgren).
 
  - New tracepoints for suspend-to-idle tracing and rework of the
    prepare/complete callbacks tracing in the PM core (Todd E Brandt,
    Rafael J Wysocki).
 
  - Wakeup sources framework enhancements (Jin Qian).
 
  - New macro for noirq system PM callbacks (Grygorii Strashko).
 
  - Assorted cleanups related to system suspend (Rafael J Wysocki).
 
  - cpuidle core cleanups to make the code more efficient (Rafael J
    Wysocki).
 
  - powernv/pseries cpuidle driver update (Shilpasri G Bhat).
 
  - cpufreq core fixes related to CPU online/offline that should
    reduce the overhead of these operations quite a bit, unless the
    CPU in question is physically going away (Viresh Kumar, Saravana
    Kannan).
 
  - Serialization of cpufreq governor callbacks to avoid race
    conditions in some cases (Viresh Kumar).
 
  - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
    Bhargava, Joe Konno).
 
  - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
    Holla, Felipe Balbi, Tang Yuantian).
 
  - Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
    Fabian Frederick, Wang Long).
 
  - New Device Tree bindings for representing Operating Performance
    Points (Viresh Kumar).
 
  - Updates for the common clock operations support code in the PM
    core (Rajendra Nayak, Geert Uytterhoeven).
 
  - PM domains core code update (Geert Uytterhoeven).
 
  - Intel Knights Landing support for the RAPL (Running Average Power
    Limit) power capping driver (Dasaratharaman Chandramouli).
 
  - Fixes related to the floor frequency setting on Atom SoCs in the
    RAPL power capping driver (Ajay Thomas).
 
  - Runtime PM framework documentation update (Ben Dooks).
 
  - cpupower tool fix (Herton R Krzesinski).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJViJdWAAoJEILEb/54YlRx/9gP/3gHoFevNRycvn0VpKqdufCI
 Mxy2LBBLlfyW2uD3+NvqvA2WWSo0Cs/LgXa04eAVxPdU7k48s8w+54U23wSouzjW
 gfwAmuHxzDR8v0h8X3h6BxNzmkIQHtmDcQlA/cZdHejY/UUw01yxRGNUUZDNbxlm
 WXn2nmlBLmGqXTYq0fpBV+3jicUghJqHHsBCqa3VR2yQioHMJG01F4UZMqYTZunN
 OIvDUghxByKz6alzdCqlLl1Y0exV6vwWUAzBsl1qHqmHu/bWFSZn3ujNNVrjqHhw
 Kl7/8dC2pQkv3Zo3gEVvfQ0onotwWZxGHzPQRdvmxvRnBunQVCi/wynx90yABX/r
 PPb/iBNV0mZskbF0zb0GZT3ZZWGA8Z0p3o5JQv2jV4m62qTzx8w50Y5kbn9N1WT+
 5bre7AVbVAlGonWszcS9iE+6TOboRz9OD1CCwPFXHItFutlBkau+1hHfFoLM0o9n
 LhpGuyszT/EUa1BHkLzuCckFqO2DpbF3N2CKmuTekw0CdgdsvRL2pRByuerk3j7R
 WQhlcvBq5YH6j43AuoEZKp8r1iN8oG/iqlrMYQaYWrW9hJaoQOoU8dGJxp/e7gKN
 r/qeYjETI+tIsjCbtH5WQzzxDI3gPISAYAtfqs7G34EEo+Lwp6kyRUAF4kDot2V3
 ZIyuKMmTu4cdwDETr/O+
 =7jTj
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "The rework of backlight interface selection API from Hans de Goede
  stands out from the number of commits and the number of affected
  places perspective.  The cpufreq core fixes from Viresh Kumar are
  quite significant too as far as the number of commits goes and because
  they should reduce CPU online/offline overhead quite a bit in the
  majority of cases.

  From the new featues point of view, the ACPICA update (to upstream
  revision 20150515) adding support for new ACPI 6 material to ACPICA is
  the one that matters the most as some new significant features will be
  based on it going forward.  Also included is an update of the ACPI
  device power management core to follow ACPI 6 (which in turn reflects
  the Windows' device PM implementation), a PM core extension to support
  wakeup interrupts in a more generic way and support for the ACPI _CCA
  device configuration object.

  The rest is mostly fixes and cleanups all over and some documentation
  updates, including new DT bindings for Operating Performance Points.

  There is one fix for a regression introduced in the 4.1 cycle, but it
  adds quite a number of lines of code, it wasn't really ready before
  Thursday and you were on vacation, so I refrained from pushing it on
  the last minute for 4.1.

  Specifics:

   - ACPICA update to upstream revision 20150515 including basic support
     for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
     XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
     FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
     _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
     Lv Zheng).

   - ACPI device power management core code update to follow ACPI 6
     which reflects the ACPI device power management implementation in
     Windows (Rafael J Wysocki).

   - rework of the backlight interface selection logic to reduce the
     number of kernel command line options and improve the handling of
     DMI quirks that may be involved in that and to make the code
     generally more straightforward (Hans de Goede).

   - fixes for the ACPI Embedded Controller (EC) driver related to the
     handling of EC transactions (Lv Zheng).

   - fix for a regression related to the ACPI resources management and
     resulting from a recent change of ACPI initialization code ordering
     (Rafael J Wysocki).

   - fix for a system initialization regression related to ACPI
     introduced during the 3.14 cycle and caused by running the code
     that switches the platform over to the ACPI mode too early in the
     initialization sequence (Rafael J Wysocki).

   - support for the ACPI _CCA device configuration object related to
     DMA cache coherence (Suravee Suthikulpanit).

   - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).

   - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).

   - ACPI processor driver cleanups (Hanjun Guo).

   - cleanups and documentation update related to the ACPI device
     properties interface based on _DSD (Rafael J Wysocki).

   - ACPI device power management fixes (Rafael J Wysocki).

   - assorted cleanups related to ACPI (Dominik Brodowski, Fabian
     Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).

   - fix for a long-standing issue causing General Protection Faults to
     be generated occasionally on return to user space after resume from
     ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).

   - fix to make the suspend core code return -EBUSY consistently in all
     cases when system suspend is aborted due to wakeup detection (Ruchi
     Kandoi).

   - support for automated device wakeup IRQ handling allowing drivers
     to make their PM support more starightforward (Tony Lindgren).

   - new tracepoints for suspend-to-idle tracing and rework of the
     prepare/complete callbacks tracing in the PM core (Todd E Brandt,
     Rafael J Wysocki).

   - wakeup sources framework enhancements (Jin Qian).

   - new macro for noirq system PM callbacks (Grygorii Strashko).

   - assorted cleanups related to system suspend (Rafael J Wysocki).

   - cpuidle core cleanups to make the code more efficient (Rafael J
     Wysocki).

   - powernv/pseries cpuidle driver update (Shilpasri G Bhat).

   - cpufreq core fixes related to CPU online/offline that should reduce
     the overhead of these operations quite a bit, unless the CPU in
     question is physically going away (Viresh Kumar, Saravana Kannan).

   - serialization of cpufreq governor callbacks to avoid race
     conditions in some cases (Viresh Kumar).

   - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
     Bhargava, Joe Konno).

   - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
     Holla, Felipe Balbi, Tang Yuantian).

   - assorted cleanups in cpufreq drivers and core (Shailendra Verma,
     Fabian Frederick, Wang Long).

   - new Device Tree bindings for representing Operating Performance
     Points (Viresh Kumar).

   - updates for the common clock operations support code in the PM core
     (Rajendra Nayak, Geert Uytterhoeven).

   - PM domains core code update (Geert Uytterhoeven).

   - Intel Knights Landing support for the RAPL (Running Average Power
     Limit) power capping driver (Dasaratharaman Chandramouli).

   - fixes related to the floor frequency setting on Atom SoCs in the
     RAPL power capping driver (Ajay Thomas).

   - runtime PM framework documentation update (Ben Dooks).

   - cpupower tool fix (Herton R Krzesinski)"

* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
  cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
  x86: Load __USER_DS into DS/ES after resume
  PM / OPP: Add binding for 'opp-suspend'
  PM / OPP: Allow multiple OPP tables to be passed via DT
  PM / OPP: Add new bindings to address shortcomings of existing bindings
  ACPI: Constify ACPI device IDs in documentation
  ACPI / enumeration: Document the rules regarding the PRP0001 device ID
  ACPI / video: Make acpi_video_unregister_backlight() private
  acpi-video-detect: Remove old API
  toshiba-acpi: Port to new backlight interface selection API
  thinkpad-acpi: Port to new backlight interface selection API
  sony-laptop: Port to new backlight interface selection API
  samsung-laptop: Port to new backlight interface selection API
  msi-wmi: Port to new backlight interface selection API
  msi-laptop: Port to new backlight interface selection API
  intel-oaktrail: Port to new backlight interface selection API
  ideapad-laptop: Port to new backlight interface selection API
  fujitsu-laptop: Port to new backlight interface selection API
  eeepc-laptop: Port to new backlight interface selection API
  dell-wmi: Port to new backlight interface selection API
  ...
2015-06-23 14:18:07 -07:00
Linus Torvalds 43224b96af Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "A rather largish update for everything time and timer related:

   - Cache footprint optimizations for both hrtimers and timer wheel

   - Lower the NOHZ impact on systems which have NOHZ or timer migration
     disabled at runtime.

   - Optimize run time overhead of hrtimer interrupt by making the clock
     offset updates smarter

   - hrtimer cleanups and removal of restrictions to tackle some
     problems in sched/perf

   - Some more leap second tweaks

   - Another round of changes addressing the 2038 problem

   - First step to change the internals of clock event devices by
     introducing the necessary infrastructure

   - Allow constant folding for usecs/msecs_to_jiffies()

   - The usual pile of clockevent/clocksource driver updates

  The hrtimer changes contain updates to sched, perf and x86 as they
  depend on them plus changes all over the tree to cleanup API changes
  and redundant code, which got copied all over the place.  The y2038
  changes touch s390 to remove the last non 2038 safe code related to
  boot/persistant clock"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  clocksource: Increase dependencies of timer-stm32 to limit build wreckage
  timer: Minimize nohz off overhead
  timer: Reduce timer migration overhead if disabled
  timer: Stats: Simplify the flags handling
  timer: Replace timer base by a cpu index
  timer: Use hlist for the timer wheel hash buckets
  timer: Remove FIFO "guarantee"
  timers: Sanitize catchup_timer_jiffies() usage
  hrtimer: Allow hrtimer::function() to free the timer
  seqcount: Introduce raw_write_seqcount_barrier()
  seqcount: Rename write_seqcount_barrier()
  hrtimer: Fix hrtimer_is_queued() hole
  hrtimer: Remove HRTIMER_STATE_MIGRATE
  selftest: Timers: Avoid signal deadlock in leap-a-day
  timekeeping: Copy the shadow-timekeeper over the real timekeeper last
  clockevents: Check state instead of mode in suspend/resume path
  selftests: timers: Add leap-second timer edge testing to leap-a-day.c
  ntp: Do leapsecond adjustment in adjtimex read path
  time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
  ntp: Introduce and use SECS_PER_DAY macro instead of 86400
  ...
2015-06-22 18:57:44 -07:00
Thomas Gleixner 683be13a28 timer: Minimize nohz off overhead
If nohz is disabled on the kernel command line the [hr]timer code
still calls wake_up_nohz_cpu() and tick_nohz_full_cpu(), a pretty
pointless exercise. Cache nohz_active in [hr]timer per cpu bases and
avoid the overhead.

Before:
  48.10%  hog       [.] main
  15.25%  [kernel]  [k] _raw_spin_lock_irqsave
   9.76%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.50%  [kernel]  [k] mod_timer
   6.44%  [kernel]  [k] lock_timer_base.isra.38
   3.87%  [kernel]  [k] detach_if_pending
   3.80%  [kernel]  [k] del_timer
   2.67%  [kernel]  [k] internal_add_timer
   1.33%  [kernel]  [k] __internal_add_timer
   0.73%  [kernel]  [k] timerfn
   0.54%  [kernel]  [k] wake_up_nohz_cpu

After:
  48.73%  hog       [.] main
  15.36%  [kernel]  [k] _raw_spin_lock_irqsave
   9.77%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.61%  [kernel]  [k] lock_timer_base.isra.38
   6.42%  [kernel]  [k] mod_timer
   3.90%  [kernel]  [k] detach_if_pending
   3.76%  [kernel]  [k] del_timer
   2.41%  [kernel]  [k] internal_add_timer
   1.39%  [kernel]  [k] __internal_add_timer
   0.76%  [kernel]  [k] timerfn

We probably should have a cached value for nohz full in the per cpu
bases as well to avoid the cpumask check. The base cache line is hot
already, the cpumask not necessarily.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.207378134@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:28 +02:00
Thomas Gleixner bc7a34b8b9 timer: Reduce timer migration overhead if disabled
Eric reported that the timer_migration sysctl is not really nice
performance wise as it needs to check at every timer insertion whether
the feature is enabled or not. Further the check does not live in the
timer code, so we have an extra function call which checks an extra
cache line to figure out that it is disabled.

We can do better and store that information in the per cpu (hr)timer
bases. I pondered to use a static key, but that's a nightmare to
update from the nohz code and the timer base cache line is hot anyway
when we select a timer base.

The old logic enabled the timer migration unconditionally if
CONFIG_NO_HZ was set even if nohz was disabled on the kernel command
line.

With this modification, we start off with migration disabled. The user
visible sysctl is still set to enabled. If the kernel switches to NOHZ
migration is enabled, if the user did not disable it via the sysctl
prior to the switch. If nohz=off is on the kernel command line,
migration stays disabled no matter what.

Before:
  47.76%  hog       [.] main
  14.84%  [kernel]  [k] _raw_spin_lock_irqsave
   9.55%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.71%  [kernel]  [k] mod_timer
   6.24%  [kernel]  [k] lock_timer_base.isra.38
   3.76%  [kernel]  [k] detach_if_pending
   3.71%  [kernel]  [k] del_timer
   2.50%  [kernel]  [k] internal_add_timer
   1.51%  [kernel]  [k] get_nohz_timer_target
   1.28%  [kernel]  [k] __internal_add_timer
   0.78%  [kernel]  [k] timerfn
   0.48%  [kernel]  [k] wake_up_nohz_cpu

After:
  48.10%  hog       [.] main
  15.25%  [kernel]  [k] _raw_spin_lock_irqsave
   9.76%  [kernel]  [k] _raw_spin_unlock_irqrestore
   6.50%  [kernel]  [k] mod_timer
   6.44%  [kernel]  [k] lock_timer_base.isra.38
   3.87%  [kernel]  [k] detach_if_pending
   3.80%  [kernel]  [k] del_timer
   2.67%  [kernel]  [k] internal_add_timer
   1.33%  [kernel]  [k] __internal_add_timer
   0.73%  [kernel]  [k] timerfn
   0.54%  [kernel]  [k] wake_up_nohz_cpu


Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:28 +02:00
Thomas Gleixner c74441a17e timer: Stats: Simplify the flags handling
Simplify the handling of the flag storage for the timer statistics. No
intermediate storage anymore. Just hand over the flags field.

I left the printout of 'deferrable' for now because changing this
would be an ABI update and I have no idea how strong people feel about
that. OTOH, I wonder whether we should kill the whole timer stats
stuff because all of that information can be retrieved via ftrace/perf
as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.046626248@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 0eeda71bc3 timer: Replace timer base by a cpu index
Instead of storing a pointer to the per cpu tvec_base we can simply
cache a CPU index in the timer_list and use that to get hold of the
correct per cpu tvec_base. This is only used in lock_timer_base() and
the slightly larger code is peanuts versus the spinlock operation and
the d-cache foot print of the timer wheel.

Aside of that this allows to get rid of following nuisances:

 - boot_tvec_base

   That statically allocated 4k bss data is just kept around so the
   timer has a home when it gets statically initialized. It serves no
   other purpose.

   With the CPU index we assign the timer to CPU0 at static
   initialization time and therefor can avoid the whole boot_tvec_base
   dance.  That also simplifies the init code, which just can use the
   per cpu base.

   Before:
     text	   data	    bss	    dec	    hex	filename
    17491	   9201	   4160	  30852	   7884	../build/kernel/time/timer.o
   After:
     text	   data	    bss	    dec	    hex	filename
    17440	   9193	      0	  26633	   6809	../build/kernel/time/timer.o

 - Overloading the base pointer with various flags

   The CPU index has enough space to hold the flags (deferrable,
   irqsafe) so we can get rid of the extra masking and bit fiddling
   with the base pointer.

As a benefit we reduce the size of struct timer_list on 64 bit
machines. 4 - 8 bytes, a size reduction up to 15% per struct timer_list,
which is a real win as we have tons of them embedded in other structs.

This changes also the newly added deferrable printout of the timer
start trace point to capture and print all timer->flags, which allows
us to decode the target cpu of the timer as well.

We might have used bitfields for this, but that would change the
static initializers and the init function for no value to accomodate
big endian bitfields.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Badhri Jagan Sridharan <Badhri@google.com>
Link: http://lkml.kernel.org/r/20150526224511.950084301@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 1dabbcec2c timer: Use hlist for the timer wheel hash buckets
This reduces the size of struct tvec_base by 50% and results in
slightly smaller code as well.

Before:
   struct tvec_base: size: 8256, cachelines: 129

   text	   data	    bss	    dec	    hex	filename
  17698	  13297	   8256	  39251	   9953	../build/kernel/time/timer.o

After:
  struct tvec_base: 4160, cachelines: 65

   text	   data	    bss	    dec	    hex	filename
  17491	   9201	   4160	  30852	   7884	../build/kernel/time/timer.o

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224511.854731214@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 1bd04bf6f6 timer: Remove FIFO "guarantee"
The FIFO guarantee is only there if two timers are queued into the
same bucket at the same jiffie on the same cpu:

 - The slack value depends on the delta between expiry and enqueue
   time, so the resulting expiry time can be different for timers
   which are queued in different jiffies.

 - Timers which are queued into the secondary array end up after a
   later queued timer which was queued into the primary array due to
   cascading.

 - Timers can end up on different cpus due to the NOHZ target moving
   around. Obviously there is no guarantee of expiry ordering between
   cpus.

So anything which relies on FIFO behaviour of the timer wheel is
broken already.

This is a preparatory patch for converting the timer wheel to hlist
which reduces the memory foot print of the wheel by 50%.

It's a seperate patch so any (unlikely to happen) regression caused by
this can be identified clearly.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Cc: George Spelvin <linux@horizon.com>
Link: http://lkml.kernel.org/r/20150526224511.757520403@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Thomas Gleixner 3bb475a344 timers: Sanitize catchup_timer_jiffies() usage
catchup_timer_jiffies() has been applied blindly to several functions
without looking for possible better ways to do it.

1) internal_add_timer()

   Move the update to base->all_timers before we actually insert the
   timer into the wheel.

2) detach_if_pending()

   Again the update to base->all_timers allows us to explicitely do
   the timer_jiffies update in place, if this was the last timer which
   got removed.

3) __run_timers()

   We only check on entry, which is silly, because base->timer_jiffies
   can be behind - especially on NOHZ kernels - and if there is a
   single deferrable timer somewhere between base->timer_jiffies and
   jiffies we expire it and then loop until base->timer_jiffies ==
   jiffies.

   Move it into the loop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224511.662994644@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Rafael J. Wysocki ab232ba570 Merge branches 'pm-sleep' and 'pm-runtime'
* pm-sleep:
  PM / sleep: trace_device_pm_callback coverage in dpm_prepare/complete
  PM / wakeup: add a dummy wakeup_source to record statistics
  PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPEND
  PM / sleep: Return -EBUSY from suspend_enter() on wakeup detection
  PM / tick: Add tracepoints for suspend-to-idle diagnostics
  PM / sleep: Fix symbol name in a comment in kernel/power/main.c
  leds / PM: fix hibernation on arm when gpio-led used with CPU led trigger
  ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  bus: omap_l3_noc: add missed callbacks for suspend-to-disk
  PM / sleep: Add macro to define common noirq system PM callbacks
  PM / sleep: Refine diagnostic messages in enter_state()
  PM / wakeup: validate wakeup source before activating it.

* pm-runtime:
  PM / Runtime: Update last_busy in rpm_resume
  PM / runtime: add note about re-calling in during device probe()
2015-06-19 01:18:02 +02:00
Peter Zijlstra 887d9dc989 hrtimer: Allow hrtimer::function() to free the timer
Currently an hrtimer callback function cannot free its own timer
because __run_hrtimer() still needs to clear HRTIMER_STATE_CALLBACK
after it. Freeing the timer would result in a clear use-after-free.

Solve this by using a scheme similar to regular timers; track the
current running timer in hrtimer_clock_base::running.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: ktkhai@parallels.com
Cc: rostedt@goodmis.org
Cc: juri.lelli@gmail.com
Cc: pang.xunlei@linaro.org
Cc: wanpeng.li@linux.intel.com
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: umgwanakikbuti@gmail.com
Link: http://lkml.kernel.org/r/20150611124743.471563047@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 00:09:56 +02:00
Peter Zijlstra 8edfb0362e hrtimer: Fix hrtimer_is_queued() hole
A queued hrtimer that gets restarted (hrtimer_start*() while
hrtimer_is_queued()) will briefly appear as unqueued/inactive, even
though the timer has always been active, we just moved it.

Close this hole by preserving timer->state in
hrtimer_start_range_ns()'s remove_hrtimer() call.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: ktkhai@parallels.com
Cc: rostedt@goodmis.org
Cc: juri.lelli@gmail.com
Cc: pang.xunlei@linaro.org
Cc: wanpeng.li@linux.intel.com
Cc: umgwanakikbuti@gmail.com
Link: http://lkml.kernel.org/r/20150611124743.175989138@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 00:09:56 +02:00
Oleg Nesterov c04dca02bc hrtimer: Remove HRTIMER_STATE_MIGRATE
I do not understand HRTIMER_STATE_MIGRATE. Unless I am totally
confused it looks buggy and simply unneeded.

migrate_hrtimer_list() sets it to keep hrtimer_active() == T, but this
is not enough: this can fool, say, hrtimer_is_queued() in
dequeue_signal().

Can't migrate_hrtimer_list() simply use HRTIMER_STATE_ENQUEUED?
This fixes the race and we can kill STATE_MIGRATE.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: ktkhai@parallels.com
Cc: rostedt@goodmis.org
Cc: juri.lelli@gmail.com
Cc: pang.xunlei@linaro.org
Cc: wanpeng.li@linux.intel.com
Cc: umgwanakikbuti@gmail.com
Link: http://lkml.kernel.org/r/20150611124743.072387650@infradead.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 00:09:56 +02:00
John Stultz 906c55579a timekeeping: Copy the shadow-timekeeper over the real timekeeper last
The fix in d151832650 (time: Move clock_was_set_seq update
before updating shadow-timekeeper) was unfortunately incomplete.

The main gist of that change was to do the shadow-copy update
last, so that any state changes were properly duplicated, and
we wouldn't accidentally have stale data in the shadow.

Unfortunately in the main update_wall_time() logic, we update
use the shadow-timekeeper to calculate the next update values,
then while holding the lock, copy the shadow-timekeeper over,
then call timekeeping_update() to do some additional
bookkeeping, (skipping the shadow mirror). The bug with this is
the additional bookkeeping isn't all read-only, and some
changes timkeeper state. Thus we might then overwrite this state
change on the next update.

To avoid this problem, do the timekeeping_update() on the
shadow-timekeeper prior to copying the full state over to
the real-timekeeper.

This avoids problems with both the clock_was_set_seq and
next_leap_ktime being overwritten and possibly the
fast-timekeepers as well.

Many thanks to Prarit for his rigorous testing, which discovered
this problem, along with Prarit and Daniel's work validating this
fix.

Reported-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434560753-7441-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18 09:27:02 +02:00
Viresh Kumar a9d20988ac clockevents: Check state instead of mode in suspend/resume path
CLOCK_EVT_MODE_* macros are present for backward compatibility (as most
of the drivers are still using old ->set_mode() interface).

These macro's shouldn't be used anymore in code, that is common to both
driver interfaces, i.e. ->set_mode() and ->set_state_*().

Drivers implementing ->set_state_*() interface, which have their
clkevt->mode set to 0 (clkevt device structures are normally globally
defined), will not participate in suspend/resume as they will always be
marked as UNUSED.

Fix this by checking state of the clockevent device instead of mode,
which is updated for both the interfaces.

Fixes: ac34ad27fc ("clockevents: Do not suspend/resume if unused")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: alexandre.belloni@free-electrons.com
Cc: sylvain.rochet@finsecur.com
Link: http://lkml.kernel.org/r/a1964eef6e8a47d02b1ff9083c6c91f73f0ff643.1434537215.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-18 09:27:02 +02:00
John Stultz 96efdcf2d0 ntp: Do leapsecond adjustment in adjtimex read path
Since the leapsecond is applied at tick-time, this means there is a
small window of time at the start of a leap-second where we cross into
the next second before applying the leap.

This patch modified adjtimex so that the leap-second is applied on the
second edge. Providing more correct leapsecond behavior.

This does make it so that adjtimex()'s returned time values can be
inconsistent with time values read from gettimeofday() or
clock_gettime(CLOCK_REALTIME,...)  for a brief period of one tick at
the leapsecond.  However, those other interfaces do not provide the
TIME_OOP time_state return that adjtimex() provides, which allows the
leapsecond to be properly represented. They instead only see a time
discontinuity, and cannot tell the first 23:59:59 from the repeated
23:59:59 leap second.

This seems like a reasonable tradeoff given clock_gettime() /
gettimeofday() cannot properly represent a leapsecond, and users
likely care more about performance, while folks who are using
adjtimex() more likely care about leap-second correctness.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434063297-28657-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12 11:15:49 +02:00
John Stultz 833f32d763 time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
Currently, leapsecond adjustments are done at tick time. As a result,
the leapsecond was applied at the first timer tick *after* the
leapsecond (~1-10ms late depending on HZ), rather then exactly on the
second edge.

This was in part historical from back when we were always tick based,
but correcting this since has been avoided since it adds extra
conditional checks in the gettime fastpath, which has performance
overhead.

However, it was recently pointed out that ABS_TIME CLOCK_REALTIME
timers set for right after the leapsecond could fire a second early,
since some timers may be expired before we trigger the timekeeping
timer, which then applies the leapsecond.

This isn't quite as bad as it sounds, since behaviorally it is similar
to what is possible w/ ntpd made leapsecond adjustments done w/o using
the kernel discipline. Where due to latencies, timers may fire just
prior to the settimeofday call. (Also, one should note that all
applications using CLOCK_REALTIME timers should always be careful,
since they are prone to quirks from settimeofday() disturbances.)

However, the purpose of having the kernel do the leap adjustment is to
avoid such latencies, so I think this is worth fixing.

So in order to properly keep those timers from firing a second early,
this patch modifies the ntp and timekeeping logic so that we keep
enough state so that the update_base_offsets_now accessor, which
provides the hrtimer core the current time, can check and apply the
leapsecond adjustment on the second edge. This prevents the hrtimer
core from expiring timers too early.

This patch does not modify any other time read path, so no additional
overhead is incurred. However, this also means that the leap-second
continues to be applied at tick time for all other read-paths.

Apologies to Richard Cochran, who pushed for similar changes years
ago, which I resisted due to the concerns about the performance
overhead.

While I suspect this isn't extremely critical, folks who care about
strict leap-second correctness will likely want to watch
this. Potentially a -stable candidate eventually.

Originally-suggested-by: Richard Cochran <richardcochran@gmail.com>
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434063297-28657-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12 11:15:49 +02:00
John Stultz 90bf361cea ntp: Introduce and use SECS_PER_DAY macro instead of 86400
Currently the leapsecond logic uses what looks like magic values.

Improve this by defining SECS_PER_DAY and using that macro
to make the logic more clear.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434063297-28657-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12 11:15:49 +02:00
John Stultz d151832650 time: Move clock_was_set_seq update before updating shadow-timekeeper
It was reported that 868a3e915f (hrtimer: Make offset
update smarter) was causing timer problems after suspend/resume.

The problem with that change is the modification to
clock_was_set_seq in timekeeping_update is done prior to
mirroring the time state to the shadow-timekeeper. Thus the
next time we do update_wall_time() the updated sequence is
overwritten by whats in the shadow copy.

This patch moves the shadow-timekeeper mirroring to the end
of the function, after all updates have been made, so all data
is kept in sync.

(This patch also affects the update_fast_timekeeper calls which
were also problematically done prior to the mirroring).

Reported-and-tested-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1434063297-28657-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-12 10:56:20 +02:00
Joe Perches 45bbfe64ea clocksource: Use current logging style
clocksource messages aren't prefixed in dmesg so it's a bit unclear
what subsystem emits the messages.

Use pr_fmt and pr_<level> to auto-prefix the messages appropriately.

Miscellanea:

o Remove "Warning" from KERN_WARNING level messages
o Align "timekeeping watchdog: " messages
o Coalesce formats
o Align multiline arguments

Signed-off-by: Joe Perches <joe@perches.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1432579795.2846.75.camel@perches.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-10 11:31:14 +02:00
Nicholas Mc Guire ae60d6a0e3 time: Refactor usecs_to_jiffies
Refactor the usecs_to_jiffies conditional code part in time.c and
jiffies.h putting it into conditional functions rather than #ifdefs
to improve readability. This is analogous to the msecs_to_jiffies()
cleanup in commit ca42aaf0c8 ("time: Refactor msecs_to_jiffies")

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Joe Perches <joe@perches.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andrew Hunter <ahh@google.com>
Cc: Paul Turner <pjt@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/1432832996-12129-1-git-send-email-hofrat@osadl.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-10 11:31:13 +02:00
Thomas Gleixner be3ef76e9d clockevents: Rename state to state_use_accessors
The only sensible way to make abuse of core internal fields obvious
and easy to grep for.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2015-06-02 16:56:42 +02:00
Thomas Gleixner 051ebd101b clockevents: Use set/get state helper functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2015-06-02 14:40:48 +02:00
Thomas Gleixner d7eb231c71 clockevents: Provide functions to set and get the state
We want to rename dev->state, so provide proper get and set
functions. Rename clockevents_set_state() to
clockevents_switch_state() to avoid confusion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
2015-06-02 14:40:47 +02:00
Viresh Kumar 472c4a9437 clockevents: Use helpers to check the state of a clockevent device
Use accessor functions to check the state of clockevent devices in
core code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/fa2b9869fd17f210eaa156ec2b594efd0230b6c7.1432192527.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-02 14:40:47 +02:00
Ingo Molnar f407a82586 Merge branch 'linus' into sched/core, to resolve conflict
Conflicts:
	arch/sparc/include/asm/topology_64.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-02 08:05:42 +02:00
Peter Zijlstra 7fc26327b7 seqlock: Introduce raw_read_seqcount_latch()
Because with latches there is a strict data dependency on the seq load
we can avoid the rmb in favour of a read_barrier_depends.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28 11:32:06 +09:30
Peter Zijlstra 6695b92a60 seqlock: Better document raw_write_seqcount_latch()
Improve the documentation of the latch technique as used in the
current timekeeping code, such that it can be readily employed
elsewhere.

Borrow from the comments in timekeeping and replace those with a
reference to this more generic comment.

Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-28 11:32:04 +09:30
Alexandre Belloni ac34ad27fc clockevents: Do not suspend/resume if unused
There is no point in calling suspend/resume for unused clockevents as
they are already stopped and disabled.

This is really important for AT91 as the hardware is a trainwreck and
takes ages to synchronize.

Reported-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1421399151-26800-1-git-send-email-alexandre.belloni@free-electrons.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-27 01:03:38 +02:00
Xunlei Pang e83d0a4106 time: Remove read_boot_clock()
Now that we have a read_boot_clock64() function available on every
architecture, and converted all the users to it, it's time to remove
the (now unused) read_boot_clock() completely from the kernel.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
[jstultz: Minor commit message tweak suggested by Ingo]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-05-22 10:36:29 -07:00
Badhri Jagan Sridharan 4e413e8526 tracing: timer: Add deferrable flag to timer_start
The timer_start event now shows whether the timer is
deferrable in case of a low-res timer. The debug_activate
function now includes a deferrable flag while calling
the trace_timer_start event.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
[jstultz: Fixed minor whitespace and grammer tweaks
 pointed out by Ingo]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-05-22 10:36:06 -07:00
John Stultz 57d05a93ad time: Rework debugging variables so they aren't global
Ingo suggested that the timekeeping debugging variables
recently added should not be global, and should be tied
to the timekeeper's read_base.

Thus this patch implements that suggestion.

This version is different from the earlier versions
as it keeps the variables in the timekeeper structure
rather then in the tkr.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-05-22 09:13:43 -07:00
Harald Geyer 6374f9124e timekeeping: Provide new API to get the current time resolution
This patch series introduces a new function
u32 ktime_get_resolution_ns(void)
which allows to clean up some driver code.

In particular the IIO subsystem has a function to provide timestamps for
events but no means to get their resolution. So currently the dht11 driver
tries to guess the resolution in a rather messy and convoluted way. We
can do much better with the new code.

This API is not designed to be exposed to user space.

This has been tested on i386, sunxi and mxs.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Harald Geyer <harald@ccbib.org>
[jstultz: Tweaked to make it build after upstream changes]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-05-22 09:12:28 -07:00
Sasha Levin 6f7d79849a time: Make sure tz_minuteswest is set to a valid value when setting time
Invalid values may overflow later, leading to undefined behaviour when
multiplied by 60 to get the amount of seconds.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-05-22 09:12:22 -07:00
Viresh Kumar d25408756a clockevents: Stop unused clockevent devices
To avoid getting spurious interrupts on a tickless CPU, clockevent
device can now be stopped by switching to ONESHOT_STOPPED state.

The natural place for handling this transition is tick_program_event().

On 'expires == KTIME_MAX', we skip programming the event and so we need
to fix such call sites as well, to always call tick_program_event()
irrespective of the expires value.

Once the clockevent device is required again, check if it was earlier
put into ONESHOT_STOPPED state. If yes, switch its state to ONESHOT
before programming its event.

To make sure we haven't missed any corner case, add a WARN() for the
case where we try to reprogram clockevent device while we aren't
configured in ONESHOT_STOPPED state.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5146b07be7f0bc497e0ebae036590ec2fa73e540.1428031396.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19 16:18:11 +02:00
Viresh Kumar 8fff52fd50 clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state
When no timers/hrtimers are pending, the expiry time is set to a
special value: 'KTIME_MAX'. This normally happens with
NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes.

When 'expiry == KTIME_MAX', we either cancel the 'tick-sched' hrtimer
(NOHZ_MODE_HIGHRES) or skip reprogramming clockevent device
(NOHZ_MODE_LOWRES).  But, the clockevent device is already
reprogrammed from the tick-handler for next tick.

As the clock event device is programmed in ONESHOT mode it will at
least fire one more time (unnecessarily). Timers on few
implementations (like arm_arch_timer, etc.) only support PERIODIC mode
and their drivers emulate ONESHOT over that. Which means that on these
platforms we will get spurious interrupts periodically (at last
programmed interval rate, normally tick rate).

In order to avoid spurious interrupts, the clockevent device should be
stopped or its interrupts should be masked.

A simple (yet hacky) solution to get this fixed could be: update
hrtimer_force_reprogram() to always reprogram clockevent device and
update clockevent drivers to STOP generating events (or delay it to
max time) when 'expires' is set to KTIME_MAX. But the drawback here is
that every clockevent driver has to be hacked for this particular case
and its very easy for new ones to miss this.

However, Thomas suggested to add an optional state ONESHOT_STOPPED to
solve this problem: lkml.org/lkml/2014/5/9/508.

This patch adds support for ONESHOT_STOPPED state in clockevents
core. It will only be available to drivers that implement the
state-specific callbacks instead of the legacy ->set_mode() callback.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/b8b383a03ac07b13312c16850b5106b82e4245b5.1428031396.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19 16:18:02 +02:00
Thomas Gleixner c3b5d3cea5 Merge branch 'linus' into timers/core
Make sure the upstream fixes are applied before adding further
modifications.
2015-05-19 16:12:32 +02:00
Nicholas Mc Guire ca42aaf0c8 time: Refactor msecs_to_jiffies
Refactor the msecs_to_jiffies conditional code part in time.c and 
jiffies.h putting it into conditional functions rather than #ifdefs
to improve readability.

[ tglx: Verified that there is no binary code change ]

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Joe Perches <joe@perches.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andrew Hunter <ahh@google.com>
Cc: Paul Turner <pjt@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/1431951554-5563-2-git-send-email-hofrat@osadl.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19 15:13:46 +02:00
Nicholas Mc Guire 0a227985d4 time: Move timeconst.h into include/generated
kernel/time/timeconst.h is moved to include/generated/ and generated 
by the top level Kbuild. This allows using timeconst.h in an earlier
build stage.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Joe Perches <joe@perches.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andrew Hunter <ahh@google.com>
Cc: Paul Turner <pjt@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/1431951554-5563-1-git-send-email-hofrat@osadl.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19 15:13:45 +02:00
Ingo Molnar a22ae71806 Linux 4.1-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVWh3TAAoJEHm+PkMAQRiG/kwH/2c9irodp2+M9OUnX2bfsBb6
 LnChiDpvkF5BB8jhP6d/XmvPp4NJzAbTxByhjdfb2E2HkorCUHCOIn2tI1TE2pUs
 2qjkOVH+XCzoV0goGtQjzK1ht8f2IrtlDiEjyRekK5cJHzhggb22QPtWL4npyd0O
 reDmG2jsRaF9POr9uLSFEv4CEnkksmRLUU0vuQX0TZeCJ41O7TXrkN/wKrLZ5mj4
 IWpqXQaSlrffq/T5HnVbXBxk3/T8QmhrIoppiMpV1mUVj0uTqlFRNi5qwT2Nit1h
 FVljWI4+WgOk3bf7fUlp+ahopjkTgu+GuXkiRP/pdgWNQO0cxCWSAzSndAlIIAE=
 =uOoJ
 -----END PGP SIGNATURE-----

Merge tag 'v4.1-rc4' into sched/core, before applying new patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19 08:37:30 +02:00
Rafael J. Wysocki 87e9b9f1d8 PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPEND
Since idle_should_freeze() is defined to always return 'false'
for CONFIG_SUSPEND unset, all of the code depending on it in
cpuidle_idle_call() is not necessary in that case.

Make that code depend on CONFIG_SUSPEND too to avoid building it
when it is not going to be used.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19 02:44:24 +02:00
Rafael J. Wysocki 75e0678e70 PM / tick: Add tracepoints for suspend-to-idle diagnostics
Add suspend/resume tracepoints to tick_freeze() and tick_unfreeze()
to catch when timekeeping is suspended and resumed during suspend-to-idle
so as to be able to check whether or not we enter the "frozen" state
and to measure the time spent in it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-15 00:26:06 +02:00
John Stultz f7bcb70eba ktime: Fix ktime_divns to do signed division
It was noted that the 32bit implementation of ktime_divns()
was doing unsigned division and didn't properly handle
negative values.

And when a ktime helper was changed to utilize
ktime_divns, it caused a regression on some IR blasters.
See the following bugzilla for details:
  https://bugzilla.redhat.com/show_bug.cgi?id=1200353

This patch fixes the problem in ktime_divns by checking
and preserving the sign bit, and then reapplying it if
appropriate after the division, it also changes the return
type to a s64 to make it more obvious this is expected.

Nicolas also pointed out that negative dividers would
cause infinite loops on 32bit systems, negative dividers
is unlikely for users of this function, but out of caution
this patch adds checks for negative dividers for both
32-bit (BUG_ON) and 64-bit(WARN_ON) versions to make sure
no such use cases creep in.

[ tglx: Hand an u64 to do_div() to avoid the compiler warning ]

Fixes: 166afb6451 'ktime: Sanitize ktime_to_us/ms conversion'
Reported-and-tested-by: Trevor Cordes <trevor@tecnopolis.ca>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1431118043-23452-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-13 10:19:35 +02:00
Linus Torvalds 95f3b1f4b1 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
 "A simple fix to actually shut down a detached device instead of
  keeping it active"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clockevents: Shutdown detached clockevent device
2015-05-09 14:57:49 -07:00
Jason Low 7110744516 sched, timer: Use the atomic task_cputime in thread_group_cputimer
Recent optimizations were made to thread_group_cputimer to improve its
scalability by keeping track of cputime stats without a lock. However,
the values were open coded to the structure, causing them to be at
a different abstraction level from the regular task_cputime structure.
Furthermore, any subsequent similar optimizations would not be able to
share the new code, since they are specific to thread_group_cputimer.

This patch adds the new task_cputime_atomic data structure (introduced in
the previous patch in the series) to thread_group_cputimer for keeping
track of the cputime atomically, which also helps generalize the code.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1430251224-5764-6-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08 12:17:46 +02:00
Jason Low 1018016c70 sched, timer: Replace spinlocks with atomics in thread_group_cputimer(), to improve scalability
While running a database workload, we found a scalability issue with itimers.

Much of the problem was caused by the thread_group_cputimer spinlock.
Each time we account for group system/user time, we need to obtain a
thread_group_cputimer's spinlock to update the timers. On larger systems
(such as a 16 socket machine), this caused more than 30% of total time
spent trying to obtain this kernel lock to update these group timer stats.

This patch converts the timers to 64-bit atomic variables and use
atomic add to update them without a lock. With this patch, the percent
of total time spent updating thread group cputimer timers was reduced
from 30% down to less than 1%.

Note: On 32-bit systems using the generic 64-bit atomics, this causes
sample_group_cputimer() to take locks 3 times instead of just 1 time.
However, we tested this patch on a 32-bit system ARM system using the
generic atomics and did not find the overhead to be much of an issue.
An explanation for why this isn't an issue is that 32-bit systems usually
have small numbers of CPUs, and cacheline contention from extra spinlocks
called periodically is not really apparent on smaller systems.

Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1430251224-5764-4-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08 12:15:31 +02:00
Jason Low 316c1608d1 sched, timer: Convert usages of ACCESS_ONCE() in the scheduler to READ_ONCE()/WRITE_ONCE()
ACCESS_ONCE doesn't work reliably on non-scalar types. This patch removes
the rest of the existing usages of ACCESS_ONCE() in the scheduler, and use
the new READ_ONCE() and WRITE_ONCE() APIs as appropriate.

Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Waiman Long <Waiman.Long@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1430251224-5764-2-git-send-email-jason.low2@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08 12:11:32 +02:00
Thomas Gleixner 6b442bc813 nohz: Fix !HIGH_RES_TIMERS hang
Simon Horman reported this crash on a system with
high-res timers disabled but nohz enabled:

  > ------------[ cut here ]------------
  > kernel BUG at kernel/irq_work.c:135!

    BUG_ON(!irqs_disabled());

So something enabled interrupts in the periodic tick handling machinery,
and that code path indeed has a local_irq_disable()/enable pair in
tick_nohz_switch_to_nohz() which causes havoc. Fix it.

This patch also fixes a +nohz -hrtimers hang reported by Ingo Molnar.

Reported-by: Simon Horman <horms@verge.net.au>
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1505071425520.4225@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-07 16:15:50 +02:00
Andreas Sandberg 38d23a6cc1 tick: hrtimer-broadcast: Prevent endless restarting when broadcast device is unused
The hrtimer callback in the hrtimer's tick broadcast code sometimes
incorrectly ends up scheduling events at the current tick causing the
kernel to hang servicing the same hrtimer forever. This typically
happens when a device is swapped out by
tick_install_broadcast_device(), which replaces the event handler with
clock_events_handle_noop() and sets the device mode to
CLOCK_EVT_MODE_UNUSED. If the timer is scheduled when this happens,
the next_event field will not be updated and the hrtimer ends up being
restarted at the current tick. To prevent this from happening, only
try to restart the hrtimer if the broadcast clock event device is in
one of the active modes and try to cancel the timer when entering the
CLOCK_EVT_MODE_UNUSED mode.

Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1429880765-5558-1-git-send-email-andreas.sandberg@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05 15:34:21 +02:00
Joonwoo Park 781978e6e1 timer: Use timer->base for flag checks
At present, internal_add_timer() examines flags with 'base' which doesn't
contain flags.  Examine with 'timer->base' to avoid unnecessary waking up
of nohz CPU when timer base has TIMER_DEFERRABLE set.

Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Cc: sboyd@codeaurora.org
Cc: skannan@codeaurora.org
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1430187709-21087-1-git-send-email-joonwoop@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05 10:40:43 +02:00
Preeti U Murthy 1ef09cd713 tick-broadcast: Fix the printing of broadcast masks
Today the number of bits of the broadcast masks that is output into
/proc/timer_list is sizeof(unsigned long). This means that on machines
with a larger number of CPUs, the bitmasks of CPUs beyond this range do
not appear.

Fix this by using bitmap printing through "%*pb" instead, so as to
output the broadcast masks for the range of nr_cpu_ids into
/proc/timer_list.

Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: peterz@infradead.org
Cc: linuxppc-dev@ozlabs.org
Cc: john.stultz@linaro.org
Link: http://lkml.kernel.org/r/20150428084520.3314.62668.stgit@preeti.in.ibm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05 10:35:58 +02:00
Thomas Gleixner 298dbd1c5c tick: broadcast: Simplify oneshot logic and shorten lock region
Simplify the oneshot logic by avoiding the reprogramming loops. That
also allows to call the cpu local handler outside of the
broadcast_lock held region.

Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05 10:25:23 +02:00
Thomas Gleixner 2951d5c031 tick: broadcast: Prevent livelock from event handler
With the removal of the hrtimer softirq the switch to highres/nohz
mode happens in the tick interrupt. That leads to a livelock when the
per cpu event handler is directly called from the broadcast handler
under broadcast lock because broadcast lock needs to be taken for the
highres/nohz switch as well.

Solve this by calling the cpu local handler outside the broadcast_lock
held region.

Fixes: c6eb3f70d4 "hrtimer: Get rid of hrtimer softirq"
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-05 10:25:23 +02:00
Viresh Kumar 149aabcc44 clockevents: Shutdown detached clockevent device
A clockevent device is marked DETACHED when it is replaced by another
clockevent device.

The device is shutdown properly for drivers that implement legacy
->set_mode() callback, as we call ->set_mode() for CLOCK_EVT_MODE_UNUSED
as well.

But for the new per-state callback interface, we skip shutting down the
device, as we thought its an internal state change. That wasn't correct.

The effect is that the device is left programmed in oneshot or periodic
mode.

Fall-back to 'case CLOCK_EVT_STATE_SHUTDOWN', to shutdown the device.

Fixes: bd624d75db "clockevents: Introduce mode specific callbacks"
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linaro-kernel@lists.linaro.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/eef0a91c51b74d4e52c8e5a95eca27b5a0563f07.1428650683.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24 21:01:48 +02:00
Peter Zijlstra 5de2755c8c hrtimer: Allow concurrent hrtimer_start() for self restarting timers
Because we drop cpu_base->lock around calling hrtimer::function, it is
possible for hrtimer_start() to come in between and enqueue the timer.

If hrtimer::function then returns HRTIMER_RESTART we'll hit the BUG_ON
because HRTIMER_STATE_ENQUEUED will be set.

Since the above is a perfectly valid scenario, remove the BUG_ON and
make the enqueue_hrtimer() call conditional on the timer not being
enqueued already.

NOTE: in that concurrent scenario its entirely common for both sites
to want to modify the hrtimer, since hrtimers don't provide
serialization themselves be sure to provide some such that the
hrtimer::function and the hrtimer_start() caller don't both try and
fudge the expiration state at the same time.

To that effect, add a WARN when someone tries to forward an already
enqueued timer, the most common way to change the expiry of self
restarting timers. Ideally we'd put the WARN in everything modifying
the expiry but most of that is inlines and we don't need the bloat.

Fixes: 2d44ae4d71 ("hrtimer: clean up cpu->base locking tricks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20150415113105.GT5029@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner 2ad5d3272d timer: Put usleep_range into the __sched section
do_usleep_range() and schedule_hrtimeout_range() are __sched as
well. So it makes no sense to have the exported function in a
different section.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.833709502@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner 6deba083e1 timer: Remove pointless return value of do_usleep_range()
The only user ignores it anyway and rightfully so.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.756060258@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner 19d9f4225d hrtimer: Avoid locking in hrtimer_cancel() if timer not active
We can do a lockless check for hrtimer_active before actually taking
the lock in hrtimer[_try_to]_cancel. This is useful for hotpath users
like nanosleep as they avoid the lock dance when the timer has
expired.

This is safe because active is true when the timer is enqueued or the
callback is running. Taking the hrtimer base lock does not protect
against concurrent hrtimer_start calls, the callsite has to do the
proper serialization itself.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.580273114@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner 61699e1307 hrtimer: Remove hrtimer_start() return value
No user was ever interested whether the timer was active or not when
it was started. All abusers of the return value are gone, so get rid
of it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.483556394@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner b8a62f1ff0 tick: broadcast-hrtimer: Remove overly clever return value abuse
The assignment of bc_moved in the conditional construct relies on the
fact that in the case of hrtimer_start() invocation the return value
is always 0. It took me a while to understand it.

We want to get rid of the hrtimer_start() return value. Open code the
logic which makes it readable as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203503.404751457@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner b193217e6d alarmtimer: Get rid of unused return value
We want to get rid of the hrtimer_start() return value and the alarm
timer return value is nowhere used. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20150414203503.243910615@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:52 +02:00
Thomas Gleixner 3f7b349ac1 hrtimer: Remove bogus hrtimer_active() check
The check for hrtimer_active() after starting the timer is
pointless. If the timer is inactive it has expired already and
therefor the task pointer is already NULL.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203502.907149271@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:51 +02:00
Thomas Gleixner 02a171af1a hrtimer: Make hrtimer_start() a inline wrapper
No point for an extra export just to set the extra argument of
hrtimer_start_range_ns() to 0.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203502.808544539@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:51 +02:00
Thomas Gleixner 58f1f803f1 hrtimer: Get rid of __hrtimer_start_range_ns()
No more callers. Remove the leftovers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203502.707871492@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:51 +02:00
Thomas Gleixner c1ad348b45 tick: Nohz: Rework next timer evaluation
The evaluation of the next timer in the nohz code is based on jiffies
while all the tick internals are nano seconds based. We have also to
convert hrtimer nanoseconds to jiffies in the !highres case. That's
just wrong and introduces interesting corner cases.

Turn it around and convert the next timer wheel timer expiry and the
rcu event to clock monotonic and base all calculations on
nanoseconds. That identifies the case where no timer is pending
clearly with an absolute expiry value of KTIME_MAX.

Makes the code more readable and gets rid of the jiffies magic in the
nohz code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Link: http://lkml.kernel.org/r/20150414203502.184198593@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner 157d29e101 tick: Sched: Restructure code
Get rid of one indentation level. Preparatory patch for a major
rework. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Link: http://lkml.kernel.org/r/20150414203502.101563235@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner 0ff53d0964 tick: sched: Force tick interrupt and get rid of softirq magic
We already got rid of the hrtimer reprogramming loops and hoops as
hrtimer now enforces an interrupt if the enqueued time is in the past.

Do the same for the nohz non highres mode. That gets rid of the need
to raise the softirq which only serves the purpose of getting the
machine out of the inner idle loop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Link: http://lkml.kernel.org/r/20150414203502.023464878@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner afc08b15cc tick: sched: Remove hrtimer_active() checks
hrtimer_start() enforces a timer interrupt if the timer is already
expired. Get rid of the checks and the forward loop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Link: http://lkml.kernel.org/r/20150414203501.943658239@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner c6eb3f70d4 hrtimer: Get rid of hrtimer softirq
hrtimer softirq is a leftover from the initial implementation and
serves only the purpose to handle the enqueueing of already expired
timers in the high resolution timer mode. We discussed whether we
change the return value and force all start sites to handle that the
timer is already expired, but that would be a Herculean task and I'm
not sure whether its a good idea to enforce that handling on
everyone.

A simpler solution is to enforce a timer interrupt instead of raising
and scheduling a softirq. Just use the existing infrastructure to do
so and remove all the softirq leftovers.

The HRTIMER softirq enum is now unused, but kept around because trace
parsers rely on the existing numbering.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203501.840834708@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner 895bdfa793 hrtimer: Keep pointer to first timer and simplify __remove_hrtimer()
__remove_hrtimer() needs to evaluate the expiry time to figure out
whether the timer which is removed is eventually the first expiring
timer on the cpu. Keep a pointer to it, which is lazily updated, so we
can avoid the evaluation dance and retrieve the information from there.

Generates slightly better code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203501.752838019@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner b97f44c9b6 hrtimer: Make use of timerqueue_add/del return values
Use the return value instead of reevaluating the information.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203501.658152945@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:50 +02:00
Thomas Gleixner 34aee88a02 hrtimer: Use cpu_base->active_base for hotpath iterators
The active_bases field is guaranteed to be in sync with the timerqueue
of the corresponding clock base. So we can use it for iterating over
the clock bases. This allows to break out early if no more active
clock bases are available and avoids touching the cache lines of
inactive clock bases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203501.322887675@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:49 +02:00
Thomas Gleixner e19ffe8be2 hrtimer: Use bits for various boolean indicators
No point in wasting 12 byte storage space. Generates better code as well.

Text size reduction:
       x8664 -64, i386 -16, ARM -132, ARM64 -0, power64 -48

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203501.227955358@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:49 +02:00
Thomas Gleixner 868a3e915f hrtimer: Make offset update smarter
On every tick/hrtimer interrupt we update the offset variables of the
clock bases. That's silly because these offsets change very seldom.

Add a sequence counter to the time keeping code which keeps track of
the offset updates (clock_was_set()). Have a sequence cache in the
hrtimer cpu bases to evaluate whether the offsets must be updated or
not. This allows us later to avoid pointless cacheline pollution.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20150414203501.132820245@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
2015-04-22 17:06:49 +02:00
Thomas Gleixner 21d6d52a1b hrtimer: Get rid of softirq time
The softirq time field in the clock bases is an optimization from the
early days of hrtimers. It provides a coarse "jiffies" like time
mostly for self rearming timers.

But that comes with a price:
    - Larger code size
    - Extra storage space
    - Duplicated functions with really small differences
   
The benefit of this is optimization is marginal for contemporary
systems.

Consolidate everything on the high resolution timer
implementation. This makes further optimizations possible.

Text size reduction:
       x8664 -95, i386 -356, ARM -148, ARM64 -40, power64 -16

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203501.039977424@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:49 +02:00
Thomas Gleixner a6ffebce7f hrtimer: Make the statistics fields smaller
No point in having usigned long for /proc/timer_list statistics. Make
them unsigned int.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203500.959773467@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:49 +02:00
Thomas Gleixner 056a3cacbc hrtimer: Get rid of hrtimer_get_res()
The resolution is directly accessible now. So its simpler just to fill
in the values of the timespec and be done with it.

Text size reduction (combined with "hrtimer: Get rid of the resolution
field in hrtimer_clock_base"):
       x8664 -61, i386 -221, ARM -60, power64 -48

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203500.879888080@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:49 +02:00
Thomas Gleixner 398ca17fb5 hrtimer: Get rid of the resolution field in hrtimer_clock_base
The field has no value because all clock bases have the same
resolution. The resolution only changes when we switch to high
resolution timer mode. We can evaluate that from a single static
variable as well. In the !HIGHRES case its simply a constant.

Export the variable, so we can simplify the usage sites.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20150414203500.645454122@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:48 +02:00
Viresh Kumar d9f0acdeef hrtimer: Update active_bases before calling hrtimer_force_reprogram()
'active_bases' indicates which clock-base have active timer. The
intention of this bit field was to avoid evaluating inactive bases. It
was introduced with the introduction of the BOOTTIME and TAI clock
bases, but it was never brought into full use.

We want to use it now, but in __remove_hrtimer() the update happens
after the calling hrtimer_force_reprogram() which has to evaluate all
clock bases for the next expiring timer. So in case the last timer of
a clock base got removed we still see the active bit and therefor
evaluate the clock base for no value. There are further optimizations
possible when active_bases is updated in the right place.

Move the update before the call to hrtimer_force_reprogram()

[ tglx: Massaged changelog ]

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linaro-kernel@lists.linaro.org
Link: http://lkml.kernel.org/r/20150414203500.533438642@linutronix.de
Link: http://lkml.kernel.org/r/c7c8ebcd9ed88bb09d76059c745a1fafb48314e7.1428039899.git.viresh.kumar@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:48 +02:00
Thomas Gleixner 91e5a2170e hrtimer: Document hrtimer_forward[_now]() proper
Document the calling context conditions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150413210035.178751779@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 17:06:48 +02:00
Thomas Gleixner 51a03393ba timekeeping: Remove stale function prototype
commit 61edec81d2 "timekeeping: Simplify timekeeping_clocktai()"
implemented timekeeping_clocktai() as an inline function, but left the
old extern prototype in the header file. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 12:03:39 +02:00
Joe Perches 7de4e74430 timer_list: Reduce SEQ_printf footprint
This macro can be converted to a static function to reduce
object size.

(x86-64 defconfig)
$ size kernel/time/timer_list.o*
   text	   data	    bss	    dec	    hex	filename
   6583	      8	      0	   6591	   19bf	kernel/time/timer_list.o.old
   4647	      8	      0	   4655	   122f	kernel/time/timer_list.o.new

Signed-off-by: Joe Perches <joe@perches.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1429295958.2850.104.camel@perches.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-22 12:03:39 +02:00
Linus Torvalds 1fc149933f Char/Misc driver patches for 4.1-rc1
Here's the big char/misc driver patchset for 4.1-rc1.
 
 Lots of different driver subsystem updates here, nothing major, full
 details are in the shortlog below.
 
 All of this has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlU2IMEACgkQMUfUDdst+yloDQCfbyIRL23WVAn9ckQse/y8gbjB
 OT4AoKTJbwndDP9Kb/lrj2tjd9QjNVrC
 =xhen
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver patchset for 4.1-rc1.

  Lots of different driver subsystem updates here, nothing major, full
  details are in the shortlog.

  All of this has been in linux-next for a while"

* tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits)
  mei: trace: remove unused TRACE_SYSTEM_STRING
  DTS: ARM: OMAP3-N900: Add lis3lv02d support
  Documentation: DT: lis302: update wakeup binding
  lis3lv02d: DT: add wakeup unit 2 and wakeup threshold
  lis3lv02d: DT: use s32 to support negative values
  Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case
  Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case
  mei: replace check for connection instead of transitioning
  mei: use mei_cl_is_connected consistently
  mei: fix mei_poll operation
  hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg()
  Drivers: hv: hv_balloon: survive ballooning request with num_pages=0
  Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function
  Drivers: hv: hv_balloon: do not online pages in offline blocks
  hv: remove the per-channel workqueue
  hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind()
  hv: run non-blocking message handlers in the dispatch tasklet
  coresight: moving to new "hwtracing" directory
  coresight-tmc: Adding a status interface to sysfs
  coresight: remove the unnecessary configuration coresight-default-sink
  ...
2015-04-21 09:42:58 -07:00
Rafael J. Wysocki def747087e timers/PM: Drop unnecessary braces from tick_freeze()
Some braces in tick_freeze() are not necessary, so drop them.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: peterz@infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1534128.H5hN3KBFB4@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 15:15:52 +02:00
Rafael J. Wysocki 422fe7502e timers/PM: Fix up tick_unfreeze()
A recent conflict resolution has left tick_resume() in
tick_unfreeze() which leads to an unbalanced execution of
tick_resume_broadcast() every time that function runs.

Fix that by replacing the tick_resume() in tick_unfreeze()
with tick_resume_local() as appropriate.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: boris.ostrovsky@oracle.com
Cc: david.vrabel@citrix.com
Cc: konrad.wilk@oracle.com
Cc: peterz@infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8099075.V0LvN3pQAV@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 15:15:51 +02:00
Thomas Gleixner 347c6f6dda timekeeping: Get rid of stale comment
Arch specific management of xtime/jiffies/wall_to_monotonic is
gone for quite a while. Zap the stale comment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/2422730.dmO29q661S@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:37 +02:00
Thomas Gleixner a49b116dcb clockevents: Cleanup dead cpu explicitely
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.

Split out the cleanup function for a dead cpu and invoke it
directly from the cpu down code. Make it conditional on
CPU_HOTPLUG as well.

Temporary change, will be refined in the future.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebased, added clockevents_notify() removal ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1735025.raBZdQHM3m@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:37 +02:00
Thomas Gleixner 52c063d1ad clockevents: Make tick handover explicit
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.

Split out the tick_handover call and invoke it explicitely from
the hotplug code. Temporary solution will be cleaned up in later
patches.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebase ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1658173.RkEEILFiQZ@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:36 +02:00
Rafael J. Wysocki ffa48c0d76 clockevents: Remove broadcast oneshot control leftovers
Now that all users are converted over to explicit calls into the
clockevents state machine, remove the notification chain leftovers.

Original-from: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/14018863.NQUzkFuafr@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:36 +02:00
Thomas Gleixner 1fe5d5c3c9 clockevents: Provide explicit broadcast oneshot control functions
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.

Split out the broadcast oneshot control into a separate function
and provide inline helpers. Switch clockevents_notify() over.
This will go away once all callers are converted.

This also gets rid of the nested locking of clockevents_lock and
broadcast_lock. The broadcast oneshot control functions do not
require clockevents_lock. Only the managing functions
(setup/shutdown/suspend/resume of the broadcast device require
clockevents_lock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Link: http://lkml.kernel.org/r/13000649.8qZuEDV0OA@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:33 +02:00
Thomas Gleixner 89feddbfe7 clockevents: Remove the broadcast control leftovers
All users converted. Remove the notify leftovers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/2076318.76XJZ8QYP3@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:33 +02:00
Thomas Gleixner 592a438ff3 clockevents: Provide explicit broadcast control functions
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call. We are way better off to have explicit
calls instead of this monstrosity.

Split out the broadcast control into a separate function and
provide inline helpers. Switch clockevents_notify() over. This
will go away once all callers are converted.

This also gets rid of the nested locking of clockevents_lock and
broadcast_lock. The broadcast control functions do not require
clockevents_lock. Only the managing functions
(setup/shutdown/suspend/resume of the broadcast device require
clockevents_lock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Lindgren <tony@atomide.com>
Link: http://lkml.kernel.org/r/8086559.ttsuS0n1Xr@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:44:31 +02:00
John Stultz 8e56f33f84 clocksource: Improve comment explaining clocks_calc_max_nsecs()'s 50% safety margin
Ingo noted that the description of clocks_calc_max_nsecs()'s
50% safety margin was somewhat circular. So this patch tries
to improve the comment to better explain what we mean by the
50% safety margin and why we need it.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-20-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:18:35 +02:00
Xunlei Pang 0fa88cb4b8 time, drivers/rtc: Don't bother with rtc_resume() for the nonstop clocksource
If a system does not provide a persistent_clock(), the time
will be updated on resume by rtc_resume(). With the addition
of the non-stop clocksources for suspend timing, those systems
set the time on resume in timekeeping_resume(), but may not
provide a valid persistent_clock().

This results in the rtc_resume() logic thinking no one has set
the time and it then will over-write the suspend time again,
which is not necessary and only increases clock error.

So, fix this for rtc_resume().

This patch also improves the name of persistent_clock_exist to
make it more grammatical.

Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-19-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:18:34 +02:00
Xunlei Pang 264bb3f79f time: Fix a bug in timekeeping_suspend() with no persistent clock
When there's no persistent clock, normally
timekeeping_suspend_time should always be zero, but this can
break in timekeeping_suspend().

At T1, there was a system suspend, so old_delta was assigned T1.
After some time, one time adjustment happened, and xtime got the
value of T1-dt(0s<dt<2s). Then, there comes another system
suspend soon after this adjustment, obviously we will get a
small negative delta_delta, resulting in a negative
timekeeping_suspend_time.

This is problematic, when doing timekeeping_resume() if there is
no nonstop clocksource for example, it will hit the else leg and
inject the improper sleeptime which is the wrong logic.

So, we can solve this problem by only doing delta related code
when the persistent clock is existent. Actually the code only
makes sense for persistent clock cases.

Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-18-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:18:33 +02:00
Xunlei Pang 7f2981393a time: Don't build timekeeping_inject_sleeptime64() if no one uses it
timekeeping_inject_sleeptime64() is only used by RTC
suspend/resume, so add build dependencies on the necessary RTC
related macros.

Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
[ Improve commit message clarity. ]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-16-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:18:31 +02:00
Xunlei Pang 3c00a1fe84 time: Add y2038 safe update_persistent_clock64()
As part of addressing in-kernel y2038 issues, this patch adds
update_persistent_clock64() and replaces all the call sites of
update_persistent_clock() with this function. This is a __weak
implementation, which simply calls the existing y2038 unsafe
update_persistent_clock().

This allows architecture specific implementations to be
converted independently, and eventually y2038-unsafe
update_persistent_clock() can be removed after all its
architecture specific implementations have been converted to
update_persistent_clock64().

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:18:20 +02:00
Xunlei Pang 2ee9663200 time: Add y2038 safe read_persistent_clock64()
As part of addressing in-kernel y2038 issues, this patch adds
read_persistent_clock64() and replaces all the call sites of
read_persistent_clock() with this function. This is a __weak
implementation, which simply calls the existing y2038 unsafe
read_persistent_clock().

This allows architecture specific implementations to be
converted independently, and eventually the y2038 unsafe
read_persistent_clock() can be removed after all its
architecture specific implementations have been converted to
read_persistent_clock64().

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:18:19 +02:00
Xunlei Pang 9a806ddbb9 time: Add y2038 safe read_boot_clock64()
As part of addressing in-kernel y2038 issues, this patch adds
read_boot_clock64() and replaces all the call sites of
read_boot_clock() with this function. This is a __weak
implementation, which simply calls the existing y2038 unsafe
read_boot_clock().

This allows architecture specific implementations to be
converted independently, and eventually the y2038 unsafe
read_boot_clock() can be removed after all its architecture
specific implementations have been converted to
read_boot_clock64().

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03 08:18:18 +02:00
Peter Zijlstra 3650b57fdf timer: Further simplify the SMP and HOTPLUG logic
Remove one CONFIG_HOTPLUG_CPU #ifdef in trade for introducing one
CONFIG_SMP #ifdef.

The CONFIG_SMP ifdef avoids declaring the per-CPU __tvec_bases storage
on UP systems since they already have boot_tvec_bases.

Also (re)add a runtime check on the base alignment -- for the paranoid
amongst us :-)

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/fdd2d35e169bdc554ffa3fe77f77716298c75ada.1427814611.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 17:46:21 +02:00
Viresh Kumar 8def906044 timer: Don't initialize 'tvec_base' on hotplug
There is no need to call init_timers_cpu() on every CPU hotplug event,
there is not much we need to reset.

 - Timer-lists are already empty at the end of migrate_timers().
 - timer_jiffies will be refreshed while adding a new timer, after the
   CPU is online again.
 - active_timers and all_timers can be reset from migrate_timers().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/54a1c30ea7b805af55beb220cadf5a07a21b0a4d.1427814611.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 17:46:01 +02:00
Peter Zijlstra b337a9380f timer: Allocate per-cpu tvec_base's statically
Memory for the 'tvec_base' array is allocated separately for the boot CPU (statically)
and non-boot CPUs (dynamically).

The reason is because __TIMER_INITIALIZER() needs to set ->base to a
valid pointer (because we've made NULL special, hint: lock_timer_base())
and we cannot get a compile time pointer to per-cpu entries because we
don't know where we'll map the section, even for the boot cpu.

This can be simplified a bit by statically allocating per-cpu memory.
The only disadvantage is that memory for one of the structures will stay
unused, i.e. for the boot CPU, which uses boot_tvec_bases.

This will also guarantee that tvec_base is cacheline aligned. Even
though tvec_base has ____cacheline_aligned stuck on, kzalloc_node() does
not actually respect that (but guarantees a minimum u64 alignment).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/17cdf560f2727f687ab159707d0aa591f8a2f82d.1427814611.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 17:46:00 +02:00
Preeti U Murthy 345527b1ed clockevents: Fix cpu_down() race for hrtimer based broadcasting
It was found when doing a hotplug stress test on POWER, that the
machine either hit softlockups or rcu_sched stall warnings.  The
issue was traced to commit:

  7cba160ad7 ("powernv/cpuidle: Redesign idle states management")

which exposed the cpu_down() race with hrtimer based broadcast mode:

  5d1638acb9 ("tick: Introduce hrtimer based broadcast")

The race is the following:

Assume CPU1 is the CPU which holds the hrtimer broadcasting duty
before it is taken down.

	CPU0					CPU1

	cpu_down()				take_cpu_down()
						disable_interrupts()

	cpu_die()

	while (CPU1 != CPU_DEAD) {
		msleep(100);
		switch_to_idle();
		stop_cpu_timer();
		schedule_broadcast();
	}

	tick_cleanup_cpu_dead()
		take_over_broadcast()

So after CPU1 disabled interrupts it cannot handle the broadcast
hrtimer anymore, so CPU0 will be stuck forever.

Fix this by explicitly taking over broadcast duty before cpu_die().

This is a temporary workaround. What we really want is a callback
in the clockevent device which allows us to do that from the dying
CPU by pushing the hrtimer onto a different cpu. That might involve
an IPI and is definitely more complex than this immediate fix.

Changelog was picked up from:

    https://lkml.org/lkml/2015/2/16/213

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: mpe@ellerman.id.au
Cc: nicolas.pitre@linaro.org
Cc: peterz@infradead.org
Cc: rjw@rjwysocki.net
Fixes: http://linuxppc.10917.n7.nabble.com/offlining-cpus-breakage-td88619.html
Link: http://lkml.kernel.org/r/20150330092410.24979.59887.stgit@preeti.in.ibm.com
[ Merged it to the latest timer tree, renamed the callback, tidied up the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 14:25:39 +02:00
Ingo Molnar 3ae7a93916 tick: Further simplify tick-internal.h
Move the broadcasting related section to the GENERIC_CLOCKEVENTS=y
section - this also solves build failures on architectures that
don't use generic clockevents yet.

Also standardize include file style to make it easier to read, and
use nesting depth aware preprocessor directives to make future merges
easier.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-02 11:26:35 +02:00
Thomas Gleixner 7270d11c56 arm/bL_switcher: Kill tick suspend hackery
Use the new tick_suspend/resume_local() and get rid of the
homebrewn implementation of these in the ARM bL switcher.  The
check for the cpumask is completely pointless.  There is no harm
to suspend a per cpu tick device unconditionally.  If that's a
real issue then we fix it proper at the core level and not with
some completely undocumented hacks in some random core code.

Move the tick internals to the core code, now that this nuisance
is gone.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ rjw: Rebase, changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/1655112.Ws17YsMfN7@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:23:00 +02:00
Thomas Gleixner f46481d0a7 tick/xen: Provide and use tick_suspend_local() and tick_resume_local()
Xen calls on every cpu into tick_resume() which is just wrong.
tick_resume() is for the syscore global suspend/resume
invocation. What XEN really wants is a per cpu local resume
function.

Provide a tick_resume_local() function and use it in XEN.

Also provide a complementary tick_suspend_local() and modify
tick_unfreeze() and tick_freeze(), respectively, to use the
new local tick resume/suspend functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Combined two patches, rebased, modified subject/changelog. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1698741.eezk9tnXtG@vostro.rjw.lan
[ Merged to latest timers/core. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:23:00 +02:00
Thomas Gleixner 080873ce2d tick: Make tick_resume_broadcast_oneshot() static
Solely used in tick-broadcast.c and the return value is
hardcoded 0. Make it static and void.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1689058.QkHYDJSRKu@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:22:59 +02:00
Thomas Gleixner 4ffee521f3 clockevents: Make suspend/resume calls explicit
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call.

We are way better off to have explicit calls instead of this
monstrosity. Split out the suspend/resume() calls and invoke
them directly from the call sites.

No locking required at this point because these calls happen
with interrupts disabled and a single cpu online.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebased on top of 4.0-rc5. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/713674030.jVm1qaHuPf@vostro.rjw.lan
[ Rebased on top of latest timers/core. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:22:59 +02:00
Thomas Gleixner db6f672ef1 clockevents: Remove extra local_irq_save() in clockevents_exchange_device()
Called with 'clockevents_lock' held and interrupts disabled
already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/51005827.yXt5tjZMBs@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:22:59 +02:00
Thomas Gleixner c1797baf68 tick: Move core only declarations and functions to core
No point to expose everything to the world. People just believe
such functions can be abused for whatever purposes. Sigh.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebased on top of 4.0-rc5 ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/28017337.VbCUc39Gme@vostro.rjw.lan
[ Merged to latest timers/core ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:22:58 +02:00
Thomas Gleixner b7475eb599 tick: Simplify tick-internal.h
tick-internal.h is pretty confusing as a lot of the stub inlines
are there several times.

Distangle the maze and make clear functional sections.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/16068264.vcNp79HLaT@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:22:58 +02:00
Thomas Gleixner bfb83b2751 tick: Move clocksource related stuff to timekeeping.h
Move clocksource related stuff to timekeeping.h and remove the
pointless include from ntp.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/2714218.nM5AEfAHj0@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:22:58 +02:00
Thomas Gleixner 9f083b74df clockevents: Remove CONFIG_GENERIC_CLOCKEVENTS_BUILD
This option was for simpler migration to the clock events code.
Most architectures have been converted and the option has been
disfunctional as a standalone option for quite some time. Remove
it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5021859.jl9OC1medj@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-01 14:22:57 +02:00
Ingo Molnar c5e77f5216 Linux 4.0-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVGHwjAAoJEHm+PkMAQRiG8rcIAJ6cEJ6mbqLpyz5XrGf4yNp0
 +wG/QlEpT8rgrxe9wSjB3lfW3kR2Pe69b9fVVCdiklygdkmva5vfmDrVGGzYfe3M
 QrFSSlMVBplvh6IiM/L1mVMtr3DSmCO23YZZ9R5b7FoEYatNHRpNWBCBpuXpd4aD
 sLuIvO3L/S7LqeOAFkkYWv6AuL9umicmjR8u+nsmCSRJom7At/aJ6R66WIp9vxho
 Rn7r6wcUk6B2Q/gYNjdSE8SIwdyKhuBGyvqQ9U9s6Btg9DQfM/b0vG5kw9hqeAq/
 9445jqVDP1whA2vz6GjnvltidxrqRvuDPBwzOnFmY5U+KZz4lS3x2mnWAAJ3xWs=
 =TqVJ
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc6' into timers/core, before applying new patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 09:08:13 +02:00
Viresh Kumar de81e64b25 clockevents: Don't validate dev->mode against CLOCK_EVT_MODE_UNUSED for new interface
It was a requirement in the legacy interface that drivers must
initialize ->mode field to 'CLOCK_EVT_MODE_UNUSED'. This field
isn't used anymore by the new interface and so should be only
checked for the legacy interface.

Probably it can be dropped as well as core doesn't rely on it
anymore, but lets keep it to support legacy interface.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: linaro-networking@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/c6604fa1a77fe1fc8dcab87769857228fb1dadd5.1425037853.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 10:26:20 +01:00
Viresh Kumar 77e32c89a7 clockevents: Manage device's state separately for the core
'enum clock_event_mode' is used for two purposes today:

 - to pass mode to the driver of clockevent device::set_mode().

 - for managing state of the device for clockevents core.

For supporting new modes/states we have moved away from the
legacy set_mode() callback to new per-mode/state callbacks. New
modes/states shouldn't be exposed to the legacy (now OBSOLOTE)
callbacks and so we shouldn't add new states to 'enum
clock_event_mode'.

Lets have separate enums for the two use cases mentioned above.
Keep using the earlier enum for legacy set_mode() callback and
mark it OBSOLETE. And add another enum to clearly specify the
possible states of a clockevent device.

This also renames the newly added per-mode callbacks to reflect
state changes.

We haven't got rid of 'mode' member of 'struct
clock_event_device' as it is used by some of the clockevent
drivers and it would automatically die down once we migrate
those drivers to the new interface. It ('mode') is only updated
now for the drivers using the legacy interface.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: linaro-networking@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/b6b0143a8a57bd58352ad35e08c25424c879c0cb.1425037853.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 10:26:19 +01:00
Viresh Kumar 554ef3876c clockevents: Handle tick device's resume separately
Upcoming patch will redefine possible states of a clockevent
device. The RESUME mode is a special case only for tick's
clockevent devices. In future it can be replaced by ->resume()
callback already available for clockevent devices.

Lets handle it separately so that clockevents_set_mode() only
handles states valid across all devices. This also renames
set_mode_resume() to tick_resume() to make it more explicit.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: linaro-networking@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/c1b0112410870f49e7bf06958e1483eac6c15e20.1425037853.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 10:26:19 +01:00
Peter Zijlstra f09cb9a180 time: Introduce tk_fast_raw
Add the NMI safe CLOCK_MONOTONIC_RAW accessor..

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150319093400.562746929@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 09:45:09 +01:00
Peter Zijlstra 4498e7467e time: Parametrize all tk_fast_mono users
In preparation for more tk_fast instances, remove all hard-coded
tk_fast_mono references.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150319093400.484279927@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 09:45:08 +01:00
Peter Zijlstra 4a4ad80d32 time: Add timerkeeper::tkr_raw
Introduce tkr_raw and make use of it.

  base_raw -> tkr_raw.base
  clock->{mult,shift} -> tkr_raw.{mult.shift}

Kill timekeeping_get_ns_raw() in favour of
timekeeping_get_ns(&tkr_raw), this removes all mono_raw special
casing.

Duplicate the updates to tkr_mono.cycle_last into tkr_raw.cycle_last,
both need the same value.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150319093400.422589590@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 09:45:07 +01:00
Peter Zijlstra 876e78818d time: Rename timekeeper::tkr to timekeeper::tkr_mono
In preparation of adding another tkr field, rename this one to
tkr_mono. Also rename tk_read_base::base_mono to tk_read_base::base,
since the structure is not specific to CLOCK_MONOTONIC and the mono
name got added to the tk_read_base instance.

Lots of trivial churn.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150319093400.344679419@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 09:45:06 +01:00
Ingo Molnar 32fea568ae timers, sched/clock: Clean up the code a bit
Trivial cleanups, to improve the readability of the generic sched_clock() code:

 - Improve and standardize comments
 - Standardize the coding style
 - Use vertical spacing where appropriate
 - etc.

No code changed:

  md5:
    19a053b31e0c54feaeff1492012b019a  sched_clock.o.before.asm
    19a053b31e0c54feaeff1492012b019a  sched_clock.o.after.asm

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 08:34:01 +01:00
Daniel Thompson 1809bfa44e timers, sched/clock: Avoid deadlock during read from NMI
Currently it is possible for an NMI (or FIQ on ARM) to come in
and read sched_clock() whilst update_sched_clock() has locked
the seqcount for writing. This results in the NMI handler
locking up when it calls raw_read_seqcount_begin().

This patch fixes the NMI safety issues by providing banked clock
data. This is a similar approach to the one used in Thomas
Gleixner's 4396e058c52e("timekeeping: Provide fast and NMI safe
access to CLOCK_MONOTONIC").

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1427397806-20889-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 08:34:00 +01:00
Daniel Thompson 9fee69a8c8 timers, sched/clock: Remove redundant notrace from update function
Currently update_sched_clock() is marked as notrace but this
function is not called by ftrace. This is trivially fixed by
removing the mark up.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1427397806-20889-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 08:33:59 +01:00
Daniel Thompson 13dbeb384d timers, sched/clock: Remove suspend from clock_read_data()
Currently cd.read_data.suspended is read by the hotpath function
sched_clock(). This variable need not be accessed on the
hotpath. In fact, once it is removed, we can remove the
conditional branches from sched_clock() and install a dummy
read_sched_clock function to suspend the clock.

The new master copy of the function pointer
(actual_read_sched_clock) is introduced and is used for all
reads of the clock hardware except those within sched_clock
itself.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1427397806-20889-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 08:33:58 +01:00
Daniel Thompson cf7c9c1707 timers, sched/clock: Optimize cache line usage
Currently sched_clock(), a very hot code path, is not optimized
to minimise its cache profile. In particular:

  1. cd is not ____cacheline_aligned,

  2. struct clock_data does not distinguish between hotpath and
     coldpath data, reducing locality of reference in the hotpath,

  3. Some hotpath data is missing from struct clock_data and is marked
     __read_mostly (which more or less guarantees it will not share a
     cache line with cd).

This patch corrects these problems by extracting all hotpath
data into a separate structure and using ____cacheline_aligned
to ensure the hotpath uses a single (64 byte) cache line.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1427397806-20889-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 08:33:57 +01:00
Daniel Thompson 8710e91402 timers, sched/clock: Match scope of read and write seqcounts
Currently the scope of the raw_write_seqcount_begin/end() in
sched_clock_register() far exceeds the scope of the read section
in sched_clock(). This gives the impression of safety during
cursory review but achieves little.

Note that this is likely to be a latent issue at present because
sched_clock_register() is typically called before we enable
interrupts, however the issue does risk bugs being needlessly
introduced as the code evolves.

This patch fixes the problem by increasing the scope of the read
locking performed by sched_clock() to cover all data modified by
sched_clock_register.

We also improve clarity by moving writes to struct clock_data
that do not impact sched_clock() outside of the critical
section.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
[ Reworked it slightly to apply to tip/timers/core]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1427397806-20889-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-27 08:33:56 +01:00
Preeti U Murthy a127d2bcf1 timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
The hrtimer mode of broadcast queues hrtimers in the idle entry
path so as to wakeup cpus in deep idle states. The associated
call graph is :

	cpuidle_idle_call()
	|____ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, ....))
	     |_____tick_broadcast_set_event()
		   |____clockevents_program_event()
			|____bc_set_next()

The hrtimer_{start/cancel} functions call into tracing which uses RCU.
But it is not legal to call into RCU in cpuidle because it is one of the
quiescent states. Hence protect this region with RCU_NONIDLE which informs
RCU that the cpu is momentarily non-idle.

As an aside it is helpful to point out that the clock event device that is
programmed here is not a per-cpu clock device; it is a
pseudo clock device, used by the broadcast framework alone.
The per-cpu clock device programming never goes through bc_set_next().

Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linuxppc-dev@ozlabs.org
Cc: mpe@ellerman.id.au
Cc: tglx@linutronix.de
Link: http://lkml.kernel.org/r/20150318104705.17763.56668.stgit@preeti.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-23 10:50:05 +01:00
John Stultz fba9e07208 clocksource: Rename __clocksource_updatefreq_*() to __clocksource_update_freq_*()
Ingo requested this function be renamed to improve readability,
so I've renamed __clocksource_updatefreq_scale() as well as the
__clocksource_updatefreq_hz/khz() functions to avoid
squishedtogethernames.

This touches some of the sh clocksources, which I've not tested.

The arch/arm/plat-omap change is just a comment change for
consistency.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-13-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:08 +01:00
John Stultz 8cc8c525ad clocksource: Add some debug info about clocksources being registered
Print the mask, max_cycles, and max_idle_ns values for
clocksources being registered.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-12-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:07 +01:00
John Stultz f8935983f1 clocksource: Mostly kill clocksource_register()
A long running project has been to clean up remaining uses
of clocksource_register(), replacing it with the simpler
clocksource_register_khz/hz() functions.

However, there are a few cases where we need to self-define
our mult/shift values, so switch the function to a more
obviously internal __clocksource_register() name, and
consolidate much of the internal logic so we don't have
duplication.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-10-git-send-email-john.stultz@linaro.org
[ Minor cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:06 +01:00
John Stultz 0b046b217a clocksource: Improve clocksource watchdog reporting
The clocksource watchdog reporting has been less helpful
then desired, as it just printed the delta between
the two clocksources. This prevents any useful analysis
of why the skew occurred.

Thus this patch tries to improve the output when we
mark a clocksource as unstable, printing out the cycle
last and now values for both the current clocksource
and the watchdog clocksource. This will allow us to see
if the result was due to a false positive caused by
a problematic watchdog.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-9-git-send-email-john.stultz@linaro.org
[ Minor cleanups of kernel messages. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:06 +01:00
John Stultz 4ca22c2648 timekeeping: Add warnings when overflows or underflows are observed
It was suggested that the underflow/overflow protection
should probably throw some sort of warning out, rather
than just silently fixing the issue.

So this patch adds some warnings here. The flag variables
used are not protected by locks, but since we can't print
from the reading functions, just being able to say we
saw an issue in the update interval is useful enough,
and can be slightly racy without real consequence.

The big complication is that we're only under a read
seqlock, so the data could shift under us during
our calculation to see if there was a problem. This
patch avoids this issue by nesting another seqlock
which allows us to snapshot the just required values
atomically. So we shouldn't see false positives.

I also added some basic rate-limiting here, since
on one build machine w/ skewed TSCs it was fairly
noisy at bootup.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-8-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:05 +01:00
John Stultz 057b87e316 timekeeping: Try to catch clocksource delta underflows
In the case where there is a broken clocksource
where there are multiple actual clocks that
aren't perfectly aligned, we may see small "negative"
deltas when we subtract 'now' from 'cycle_last'.

The values are actually negative with respect to the
clocksource mask value, not necessarily negative
if cast to a s64, but we can check by checking the
delta to see if it is a small (relative to the mask)
negative value (again negative relative to the mask).

If so, we assume we jumped backwards somehow and
instead use zero for our delta.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-7-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:05 +01:00
John Stultz a558cd021d timekeeping: Add checks to cap clocksource reads to the 'max_cycles' value
When calculating the current delta since the last tick, we
currently have no hard protections to prevent a multiplication
overflow from occuring.

This patch introduces infrastructure to allow a cap that
limits the clocksource read delta value to the 'max_cycles' value,
which is where an overflow would occur.

Since this is in the hotpath, it adds the extra checking under
CONFIG_DEBUG_TIMEKEEPING=y.

There was some concern that capping time like this could cause
problems as we may stop expiring timers, which could go circular
if the timer that triggers time accumulation were mis-scheduled
too far in the future, which would cause time to stop.

However, since the mult overflow would result in a smaller time
value, we would effectively have the same problem there.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:07:04 +01:00
John Stultz 3c17ad19f0 timekeeping: Add debugging checks to warn if we see delays
Recently there's been requests for better sanity
checking in the time code, so that it's more clear
when something is going wrong, since timekeeping issues
could manifest in a large number of strange ways in
various subsystems.

Thus, this patch adds some extra infrastructure to
add a check to update_wall_time() to print two new
warnings:

 1) if we see the call delayed beyond the 'max_cycles'
    overflow point,

 2) or if we see the call delayed beyond the clocksource's
    'max_idle_ns' value, which is currently 50% of the
    overflow point.

This extra infrastructure is conditional on
a new CONFIG_DEBUG_TIMEKEEPING option, also
added in this patch - default off.

Tested this a bit by halting qemu for specified
lengths of time to trigger the warnings.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-5-git-send-email-john.stultz@linaro.org
[ Improved the changelog and the messages a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-13 08:06:58 +01:00
John Stultz fb82fe2fe8 clocksource: Add 'max_cycles' to 'struct clocksource'
In order to facilitate clocksource validation, add a
'max_cycles' field to the clocksource structure which
will hold the maximum cycle value that can safely be
multiplied without potentially causing an overflow.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426133800-29329-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-12 10:16:38 +01:00