The double ifdefs (one for the variable declaration and
one around the code) are quite aesthetically displeasing.
Factor this code out into a helper for easier wrapping.
This will become even more ugly when another skb ext
comparison is added in the future.
The resulting machine code looks the same, the compiler
seems to try to use %rax more and some blocks more around
but I haven't spotted minor differences.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRO control block (NAPI_GRO_CB) is currently at its maximum size.
This commit reduces its size by putting two groups of fields that are
used only at different times into a union.
Specifically, the fields frag0 and frag0_len are the fields that make up
the frag0 optimisation mechanism, which is used during the initial
parsing of the SKB.
The fields last and age are used after the initial parsing, while the
SKB is stored in the GRO list, waiting for other packets to arrive.
There was one location in dev_gro_receive that modified the frag0 fields
after setting last and age. I changed this accordingly without altering
the code behaviour.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230601161407.GA9253@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most users use __skb_frag_set_page()/skb_frag_off_set()/
skb_frag_size_set() to fill the page desc for a skb frag.
Introduce skb_frag_fill_page_desc() to do that.
net/bpf/test_run.c does not call skb_frag_off_set() to
set the offset, "copy_from_user(page_address(page), ...)"
and 'shinfo' being part of the 'data' kzalloced in
bpf_test_init() suggest that it is assuming offset to be
initialized as zero, so call skb_frag_fill_page_desc()
with offset being zero for this case.
Also, skb_frag_set_page() is not used anymore, so remove
it.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__kfree_skb_defer() uses the old naming where "defer" meant
slab bulk free/alloc APIs. In the meantime we also made
__kfree_skb_defer() feed the per-NAPI skb cache, which
implies bulk APIs. So take away the 'defer' and add 'napi'.
While at it add a drop reason. This only matters on the
tx_action path, if the skb has a frag_list. But getting
rid of a SKB_DROP_REASON_NOT_SPECIFIED seems like a net
benefit so why not.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230420020005.815854-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to Eric's IPv6 BIG TCP, this patch is to enable IPv4 BIG TCP.
Firstly, allow sk->sk_gso_max_size to be set to a value greater than
GSO_LEGACY_MAX_SIZE by not trimming gso_max_size in sk_trim_gso_size()
for IPv4 TCP sockets.
Then on TX path, set IP header tot_len to 0 when skb->len > IP_MAX_MTU
in __ip_local_out() to allow to send BIG TCP packets, and this implies
that skb->len is the length of a IPv4 packet; On RX path, use skb->len
as the length of the IPv4 packet when the IP header tot_len is 0 and
skb->len > IP_MAX_MTU in ip_rcv_core(). As the API iph_set_totlen() and
skb_ip_totlen() are used in __ip_local_out() and ip_rcv_core(), we only
need to update these APIs.
Also in GRO receive, add the check for ETH_P_IP/IPPROTO_TCP, and allows
the merged packet size >= GRO_LEGACY_MAX_SIZE in skb_gro_receive(). In
GRO complete, set IP header tot_len to 0 when the merged packet size
greater than IP_MAX_MTU in iph_set_totlen() so that it can be processed
on RX path.
Note that by checking skb_is_gso_tcp() in API iph_totlen(), it makes
this implementation safe to use iph->len == 0 indicates IPv4 BIG TCP
packets.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GSO should not merge page pool recycled frames with standard reference
counted frames. Traditionally this didn't occur, at least not often.
However as we start looking at adding support for wireless adapters there
becomes the potential to mix the two due to A-MSDU repartitioning frames in
the receive path. There are possibly other places where this may have
occurred however I suspect they must be few and far between as we have not
seen this issue until now.
Fixes: 53e0961da1 ("page_pool: add frag page recycling support in page pool")
Reported-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/167475990764.1934330.11960904198087757911.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jaroslav reported a recent throughput regression with virtio_net
caused by blamed commit.
It is unclear if DODGY GSO packets coming from user space
can be accepted by GRO engine in the future with minimal
changes, and if there is any expected gain from it.
In the meantime, make sure to detect and flush DODGY packets.
Fixes: 5eddb24901 ("gro: add support of (hw)gro packets to gro stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can remove a conditional test in gro_list_prepare()
by comparing vlan_all fields of the two skbs.
Notes:
While comparing the vlan_proto is not strictly needed,
because part of the following compare_ether_header() call,
using 32bit word is actually faster than using 16bit values.
napi_reuse_skb() makes sure to clear skb->vlan_all,
as it already calls __vlan_hwaccel_clear_tag()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After searching for a protocol handler in dev_gro_receive, checking for
failure is redundant. Skip the failure code after finding the
corresponding handler.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221108123320.GA59373@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current GRO stack only supports incoming packets containing
one frame/MSS.
This patch changes GRO to accept packets that are already GRO.
HW-GRO (aka RSC for some vendors) is very often limited in presence
of interleaved packets. Linux SW GRO stack can complete the job
and provide larger GRO packets, thus reducing rate of ACK packets
and cpu overhead.
This also means BIG TCP can still be used, even if HW-GRO/RSC was
able to cook ~64 KB GRO packets.
v2: fix logic in tcp_gro_receive()
Only support TCP for the moment (Paolo)
Co-Developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the gro_max_size to exceed a value larger than 65536.
There weren't really any external limitations that prevented this other
than the fact that IPv4 only supports a 16 bit length field. Since we have
the option of adding a hop-by-hop header for IPv6 we can allow IPv6 to
exceed this value and for IPv4 and non-TCP flows we can cap things at 65536
via a constant rather than relying on gro_max_size.
[edumazet] limit GRO_MAX_SIZE to (8 * 65535) to avoid overflows.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.
This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.
Fixes: c35fe4106b ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
While inspecting some perf report, I noticed that the compiler
emits suboptimal code for the napi CB initialization, fetching
and storing multiple times the memory for flags bitfield.
This is with gcc 10.3.1, but I observed the same with older compiler
versions.
We can help the compiler to do a nicer work clearing several
fields at once using an u32 alias. The generated code is quite
smaller, with the same number of conditional.
Before:
objdump -t net/core/gro.o | grep " F .text"
0000000000000bb0 l F .text 0000000000000357 dev_gro_receive
After:
0000000000000bb0 l F .text 000000000000033c dev_gro_receive
v1 -> v2:
- use struct_group (Alexander and Alex)
RFC -> v1:
- use __struct_group to delimit the zeroed area (Alexander)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 5e10da5385 ("skbuff: allow 'slow_gro' for skb
carring sock reference") and commit af352460b4 ("net: fix GRO
skb truesize update") the truesize of the skb with stolen head is
properly updated by the GRO engine, we don't need anymore resetting
it at recycle time.
v1 -> v2:
- clarify the commit message (Alexander)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet suggested to allow users to modify max GRO packet size.
We have seen GRO being disabled by users of appliances (such as
wifi access points) because of claimed bufferbloat issues,
or some work arounds in sch_cake, to split GRO/GSO packets.
Instead of disabling GRO completely, one can chose to limit
the maximum packet size of GRO packets, depending on their
latency constraints.
This patch adds a per device gro_max_size attribute
that can be changed with ip link command.
ip link set dev eth0 gro_max_size 16000
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move gro code and data from net/core/dev.c to net/core/gro.c
to ease maintenance.
gro_normal_list() and gro_normal_one() are inlined
because they are called from both files.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/core/gro.c will contain all core gro functions,
to shrink net/core/skbuff.c and net/core/dev.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski
Eric Dumazet
Richard Gobert
Yunsheng Lin
Xin Long
Alexander Duyck
Coco Li
Steffen Klassert
Paolo Abeni