Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.
Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression
Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
In the very rare case where the readdir reply contains multiple cookies
that map to the same hash value, we can end up deadlocking waiting for a
page lock that we already hold. In this case we should fail the page
lock by using grab_cache_page_nowait().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When I/O fails in one of the currently connected DFS targets, retry it
from other targets as specified in MS-DFSC "3.1.5.2 I/O Operation to
+Target Fails with an Error Other Than STATUS_PATH_NOT_COVERED."
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann Horn)
- Don't write past end of notes for regset gap in coredump (Rick Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=SyEY
-----END PGP SIGNATURE-----
Merge tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Execve and binfmt updates.
Eric and I have stepped up to be the active maintainers of this area,
so here's our first collection. The bulk of the work was in coredump
handling fixes; additional details are noted below:
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey
Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann
Horn)
- Don't write past end of notes for regset gap in coredump (Rick
Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)"
* tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Don't write past end of notes for regset gap
a.out: Stop building a.out/osf1 support on alpha and m68k
coredump: Don't compile flat_core_dump when coredumps are disabled
coredump: Use the vma snapshot in fill_files_note
coredump/elf: Pass coredump_params into fill_note_info
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump: Snapshot the vmas in do_coredump
coredump: Move definition of struct coredump_params into coredump.h
binfmt_elf: Introduce KUnit test
ELF: Properly redefine PT_GNU_* in terms of PT_LOOS
MAINTAINERS: Update execve entry with more details
exec: cleanup comments
fs/binfmt_elf: Refactor load_elf_binary function
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
binfmt: move more stuff undef CONFIG_COREDUMP
selftests/exec: Test for empty string on NULL argv
exec: Force single empty string when argv is empty
coredump: Also dump first pages of non-executable ELF libraries
ELF: fix overflow in total mapping size calculation
When the ring is exiting, as part of the shutdown, poll requests are
removed. But io_poll_remove_all() does not remove entries when finding
them, and since completions are done out-of-band, we can find and remove
the same entry multiple times.
We do guard the poll execution by poll ownership, but that does not
exclude us from reissuing a new one once the previous removal ownership
goes away.
This can race with poll execution as well, where we then end up seeing
req->apoll be NULL because a previous task_work requeue finished the
request.
Remove the poll entry when we find it and get ownership of it. This
prevents multiple invocations from finding it.
Fixes: aa43477b04 ("io_uring: poll rework")
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=PzC6
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/alloc-cleanups-2022-03-18' of git://git.kernel.dk/linux-block
Pull bio_alloc() cleanups from Jens Axboe:
"Filesystem cleanups to pass the bio op to bio_alloc() instead of
setting it just before bio submission".
* tag 'for-5.18/alloc-cleanups-2022-03-18' of git://git.kernel.dk/linux-block:
f2fs: pass the bio operation to bio_alloc_bioset
f2fs: don't pass a bio to f2fs_target_device
nilfs2: pass the operation to bio_alloc
ext4: pass the operation to bio_alloc
mpage: pass the operation to bio_alloc
-----BEGIN PGP SIGNATURE-----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=zzak
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/io_uring-statx-2022-03-18' of git://git.kernel.dk/linux-block
Pull io_uring statx fixes from Jens Axboe:
"On top of the main io_uring branch, this is to ensure that the
filename component of statx is stable after submit.
That requires a few VFS related changes"
* tag 'for-5.18/io_uring-statx-2022-03-18' of git://git.kernel.dk/linux-block:
io-uring: Make statx API stable
-----BEGIN PGP SIGNATURE-----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=OBma
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/io_uring-2022-03-18' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Fixes for current file position. Still doesn't have the f_pos_lock
sorted, but it's a step in the right direction (Dylan)
- Tracing updates (Dylan, Stefan)
- Improvements to io-wq locking (Hao)
- Improvements for provided buffers (me, Pavel)
- Support for registered file descriptors (me, Xiaoguang)
- Support for ring messages (me)
- Poll improvements (me)
- Fix for fixed buffers and non-iterator reads/writes (me)
- Support for NAPI on sockets (Olivier)
- Ring quiesce improvements (Usama)
- Misc fixes (Olivier, Pavel)
* tag 'for-5.18/io_uring-2022-03-18' of git://git.kernel.dk/linux-block: (42 commits)
io_uring: terminate manual loop iterator loop correctly for non-vecs
io_uring: don't check unrelated req->open.how in accept request
io_uring: manage provided buffers strictly ordered
io_uring: fold evfd signalling under a slower path
io_uring: thin down io_commit_cqring()
io_uring: shuffle io_eventfd_signal() bits around
io_uring: remove extra barrier for non-sqpoll iopoll
io_uring: fix provided buffer return on failure for kiocb_done()
io_uring: extend provided buf return to fails
io_uring: refactor timeout cancellation cqe posting
io_uring: normilise naming for fill_cqe*
io_uring: cache poll/double-poll state with a request flag
io_uring: cache req->apoll->events in req->cflags
io_uring: move req->poll_refs into previous struct hole
io_uring: make tracing format consistent
io_uring: recycle apoll_poll entries
io_uring: remove duplicated member check for io_msg_ring_prep()
io_uring: allow submissions to continue on error
io_uring: recycle provided buffers if request goes async
io_uring: ensure reads re-import for selected buffers
...
Currently, we use this undocumented macro to encode the minimum number
of blocks needed to replenish a completely empty AGFL when an AG is
nearly full. This has lead to confusion on the part of the maintainers,
so let's document what the value actually means, and move it to
xfs_alloc.c since it's not used outside of that module.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmIvta8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNAIhB/oDSva5FryAFExVuIB+mqRkbZO9kj6fy/5J
ctN9LEVO2GI/U1TVAUWop1lXmP8Kbq5UCZOAuY8sz7dAZs7NRUWkwTrXVhaTpi6L
oxCfu5Afu76d/TGgivNz+G7/ewIJRFj5zCPmHezLF9iiWPUkcAsP0XCp4a0iOjU4
04O4d7TL/ap9ujEes+U0oEXHnyDTPrVB2OVE316FKD1fgztcjVJ2U+TxX5O4xitT
PPIfeQCjQBq1B2OC1cptE3wpP+YEr9OZJbx+Ieweidy1CSInEy0nZ13tLoUnGPGU
KPhsvO9daUCbhbd5IDRBuXmTi/sHU4NIB8LNEVzT1mUPnU8pCizv
=ziGg
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
These functions are page cache functionality and don't need to be
declared in fs.h.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Add kernel-doc and return the number of pages removed in order to
get the statistics right in __invalidate_mapping_pages().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
This saves a lot of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
As bughunter reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215709
f2fs may hang when mounting a fuzzed image, the dmesg shows as below:
__filemap_get_folio+0x3a9/0x590
pagecache_get_page+0x18/0x60
__get_meta_page+0x95/0x460 [f2fs]
get_checkpoint_version+0x2a/0x1e0 [f2fs]
validate_checkpoint+0x8e/0x2a0 [f2fs]
f2fs_get_valid_checkpoint+0xd0/0x620 [f2fs]
f2fs_fill_super+0xc01/0x1d40 [f2fs]
mount_bdev+0x18a/0x1c0
f2fs_mount+0x15/0x20 [f2fs]
legacy_get_tree+0x28/0x50
vfs_get_tree+0x27/0xc0
path_mount+0x480/0xaa0
do_mount+0x7c/0xa0
__x64_sys_mount+0x8b/0xe0
do_syscall_64+0x38/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is cp_pack_total_block_count field in checkpoint was fuzzed
to one, as calcuated, two cp pack block locates in the same block address,
so then read latter cp pack block, it will block on the page lock due to
the lock has already held when reading previous cp pack block, fix it by
adding sanity check for cp_pack_total_block_count.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Changed a way of showing values of them to use strings.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a new mount option -- trunkdiscovery,notrunkdiscovery -- to
toggle whether or not the client will engage in actively discovery
of trunking locations.
v2 make notrunkdiscovery default
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 1976b2b314 ("NFSv4.1 query for fs_location attr on a new file system")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reset the last_readdir at the same time, and add a comment explaining
why we don't free last_readdir when dir_emit returns false.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If read_mapping_folio() fails then "inline_version" is printed without
being initialized.
[ jlayton: use CEPH_INLINE_NONE instead of "-1" ]
Fixes: 083db6fd3e ("ceph: uninline the data on a file opened for writing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make the math a bit simpler to understand (should not
affect execution speeds).
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Latencies are of type ktime_t, coverting from jiffies is incorrect.
Also, switch to "struct ceph_timespec" for r/w/m latencies.
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_find_inode() may will fail and return NULL.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_get_inode() will search for or insert a new inode into the
hash for the given vino, and return a reference to it. If new is
non-NULL, its reference is consumed.
We should release the reference when in error handing cases.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Without a full memory barrier between the store to the flags and the
load of the SQ tail the two operations can be reordered and this can
lead to a situation where the SQPOLL thread goes to sleep while the
application writes to the SQ tail and doesn't see the wakeup flag.
This memory barrier pairs with a full memory barrier in the application
between its store to the SQ tail and its load of the flags.
Signed-off-by: Almog Khaikin <almogkh@gmail.com>
Link: https://lore.kernel.org/r/20220321090059.46313-1-almogkh@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure that we call fsnotify_modify() if we write a file, and that we
do fsnotify_access() if we read it. This enables anyone using inotify
on the file to get notified.
Ditto for fallocate, ensure that fsnotify_modify() is called.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While the original code is valid, it is not the obvious choice for the
sizeof() call and in preparation to limit the scope of the list iterator
variable the sizeof should be changed to the size of the destination.
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use netif_is_bridge_port defined in <linux/netdevice.h> instead of
open-coding it.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Steve French <stfrench@microsoft.com>
I've been chasing a recent resurgence in generic/388 recovery
failure and/or corruption events. The events have largely been
uninitialised inode chunks being tripped over in log recovery
such as:
XFS (pmem1): User initiated shutdown received.
pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096
XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/xfs/xfs_fsops.c:500). Shutting down filesystem.
XFS (pmem1): Please unmount the filesystem and rectify the problem(s)
XFS (pmem1): Unmounting Filesystem
XFS (pmem1): Mounting V5 Filesystem
XFS (pmem1): Starting recovery (logdev: internal)
XFS (pmem1): bad inode magic/vsn daddr 8723584 #0 (magic=1818)
XFS (pmem1): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x851c80 xfs_inode_buf_verify
XFS (pmem1): Unmount and run xfs_repair
XFS (pmem1): First 128 bytes of corrupted metadata buffer:
00000000: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000010: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000020: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000030: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000040: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000050: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000060: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
00000070: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................
XFS (pmem1): metadata I/O error in "xlog_recover_items_pass2+0x52/0xc0" at daddr 0x851c80 len 32 error 117
XFS (pmem1): log mount/recovery failed: error -117
XFS (pmem1): log mount failed
There have been isolated random other issues, too - xfs_repair fails
because it finds some corruption in symlink blocks, rmap
inconsistencies, etc - but they are nowhere near as common as the
uninitialised inode chunk failure.
The problem has clearly happened at runtime before recovery has run;
I can see the ICREATE log item in the log shortly before the
actively recovered range of the log. This means the ICREATE was
definitely created and written to the log, but for some reason the
tail of the log has been moved past the ordered buffer log item that
tracks INODE_ALLOC buffers and, supposedly, prevents the tail of the
log moving past the ICREATE log item before the inode chunk buffer
is written to disk.
Tracing the fsstress processes that are running when the filesystem
shut down immediately pin-pointed the problem:
user shutdown marks xfs_mount as shutdown
godown-213341 [008] 6398.022871: console: [ 6397.915392] XFS (pmem1): User initiated shutdown received.
.....
aild tries to push ordered inode cluster buffer
xfsaild/pmem1-213314 [001] 6398.022974: xfs_buf_trylock: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 16 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_inode_item_push+0x8e
xfsaild/pmem1-213314 [001] 6398.022976: xfs_ilock_nowait: dev 259:1 ino 0x851c80 flags ILOCK_SHARED caller xfs_iflush_cluster+0xae
xfs_iflush_cluster() checks xfs_is_shutdown(), returns true,
calls xfs_iflush_abort() to kill writeback of the inode.
Inode is removed from AIL, drops cluster buffer reference.
xfsaild/pmem1-213314 [001] 6398.022977: xfs_ail_delete: dev 259:1 lip 0xffff88880247ed80 old lsn 7/20344 new lsn 7/21000 type XFS_LI_INODE flags IN_AIL
xfsaild/pmem1-213314 [001] 6398.022978: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 17 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_iflush_abort+0xd7
.....
All inodes on cluster buffer are aborted, then the cluster buffer
itself is aborted and removed from the AIL *without writeback*:
xfsaild/pmem1-213314 [001] 6398.023011: xfs_buf_error_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_ioend_fail+0x33
xfsaild/pmem1-213314 [001] 6398.023012: xfs_ail_delete: dev 259:1 lip 0xffff8888053efde8 old lsn 7/20344 new lsn 7/20344 type XFS_LI_BUF flags IN_AIL
The inode buffer was at 7/20344 when it was removed from the AIL.
xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_item_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_done+0x31
xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_relse+0x39
.....
Userspace is still running, doing stuff. an fsstress process runs
syncfs() or sync() and we end up in sync_fs_one_sb() which issues
a log force. This pushes on the CIL:
fsstress-213322 [001] 6398.024430: xfs_fs_sync_fs: dev 259:1 m_features 0x20000000019ff6e9 opstate (clean|shutdown|inodegc|blockgc) s_flags 0x70810000 caller sync_fs_one_sb+0x26
fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x0 caller xfs_fs_sync_fs+0x82
fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x5f caller xfs_log_force+0x7c
<...>-194402 [001] 6398.024467: kmem_alloc: size 176 flags 0x14 caller xlog_cil_push_work+0x9f
And the CIL fills up iclogs with pending changes. This picks up
the current tail from the AIL:
<...>-194402 [001] 6398.024497: xlog_iclog_get_space: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x0 flags caller xlog_write+0x149
<...>-194402 [001] 6398.024498: xlog_iclog_switch: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x700005408 flags caller xlog_state_get_iclog_space+0x37e
<...>-194402 [001] 6398.024521: xlog_iclog_release: dev 259:1 state XLOG_STATE_WANT_SYNC refcnt 1 offset 32256 lsn 0x700005408 flags caller xlog_write+0x5f9
<...>-194402 [001] 6398.024522: xfs_log_assign_tail_lsn: dev 259:1 new tail lsn 7/21000, old lsn 7/20344, last sync 7/21448
And it moves the tail of the log to 7/21000 from 7/20344. This
*moves the tail of the log beyond the ICREATE transaction* that was
at 7/20344 and pinned by the inode cluster buffer that was cancelled
above.
....
godown-213341 [008] 6398.027005: xfs_force_shutdown: dev 259:1 tag logerror flags log_io|force_umount file fs/xfs/xfs_fsops.c line_num 500
godown-213341 [008] 6398.027022: console: [ 6397.915406] pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096
godown-213341 [008] 6398.030551: console: [ 6397.919546] XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/
And finally the log itself is now shutdown, stopping all further
writes to the log. But this is too late to prevent the corruption
that moving the tail of the log forwards after we start cancelling
writeback causes.
The fundamental problem here is that we are using the wrong shutdown
checks for log items. We've long conflated mount shutdown with log
shutdown state, and I started separating that recently with the
atomic shutdown state changes in commit b36d4651e1 ("xfs: make
forced shutdown processing atomic"). The changes in that commit
series are directly responsible for being able to diagnose this
issue because it clearly separated mount shutdown from log shutdown.
Essentially, once we start cancelling writeback of log items and
removing them from the AIL because the filesystem is shut down, we
*cannot* update the journal because we may have cancelled the items
that pin the tail of the log. That moves the tail of the log
forwards without having written the metadata back, hence we have
corrupt in memory state and writing to the journal propagates that
to the on-disk state.
What commit b36d4651e1 makes clear is that log item state needs to
change relative to log shutdown, not mount shutdown. IOWs, anything
that aborts metadata writeback needs to check log shutdown state
because log items directly affect log consistency. Having them check
mount shutdown state introduces the above race condition where we
cancel metadata writeback before the log shuts down.
To fix this, this patch works through all log items and converts
shutdown checks to use xlog_is_shutdown() rather than
xfs_is_shutdown(), so that we don't start aborting metadata
writeback before we shut off journal writes.
AFAICT, this race condition is a zero day IO error handling bug in
XFS that dates back to the introduction of XLOG_IO_ERROR,
XLOG_STATE_IOERROR and XFS_FORCED_SHUTDOWN back in January 1997.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The AIL operates purely on log items, so it is a log centric
subsystem. Divorce it from the xfs_mount and instead have it pass
around xlog pointers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Log items belong to the log, not the xfs_mount. Convert the mount
pointer in the log item to a xlog pointer in preparation for
upcoming log centric changes to the log items.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
When the AIL tries to flush the CIL, it relies on the CIL push
ending up on stable storage without having to wait for and
manipulate iclog state directly. However, if there is already a
pending CIL push when the AIL tries to flush the CIL, it won't set
the cil->xc_push_commit_stable flag and so the CIL push will not
actively flush the commit record iclog.
generic/530 when run on a single CPU test VM can trigger this fairly
reliably. This test exercises unlinked inode recovery, and can
result in inodes being pinned in memory by ongoing modifications to
the inode cluster buffer to record unlinked list modifications. As a
result, the first inode unlinked in a buffer can pin the tail of the
log whilst the inode cluster buffer is pinned by the current
checkpoint that has been pushed but isn't on stable storage because
because the cil->xc_push_commit_stable was not set. This results in
the log/AIL effectively deadlocking until something triggers the
commit record iclog to be pushed to stable storage (i.e. the
periodic log worker calling xfs_log_force()).
The fix is two-fold - first we should always set the
cil->xc_push_commit_stable when xlog_cil_flush() is called,
regardless of whether there is already a pending push or not.
Second, if the CIL is empty, we should trigger an iclog flush to
ensure that the iclogs of the last checkpoint have actually been
submitted to disk as that checkpoint may not have been run under
stable completion constraints.
Reported-and-tested-by: Matthew Wilcox <willy@infradead.org>
Fixes: 0020a190cf ("xfs: AIL needs asynchronous CIL forcing")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_ail_push_all_sync() has a loop like this:
while max_ail_lsn {
prepare_to_wait(ail_empty)
target = max_ail_lsn
wake_up(ail_task);
schedule()
}
Which is designed to sleep until the AIL is emptied. When
xfs_ail_update_finish() moves the tail of the log, it does:
if (list_empty(&ailp->ail_head))
wake_up_all(&ailp->ail_empty);
So it will only wake up the sync push waiter when the AIL goes
empty. If, by the time the push waiter has woken, the AIL has more
in it, it will reset the target, wake the push task and go back to
sleep.
The problem here is that if the AIL is having items added to it
when xfs_ail_push_all_sync() is called, then they may get inserted
into the AIL at a LSN higher than the target LSN. At this point,
xfsaild_push() will see that the target is X, the item LSNs are
(X+N) and skip over them, hence never pushing the out.
The result of this the AIL will not get emptied by the AIL push
thread, hence xfs_ail_finish_update() will never see the AIL being
empty even if it moves the tail. Hence xfs_ail_push_all_sync() never
gets woken and hence cannot update the push target to capture the
items beyond the current target on the LSN.
This is a TOCTOU type of issue so the way to avoid it is to not
use the push target at all for sync pushes. We know that a sync push
is being requested by the fact the ail_empty wait queue is active,
hence the xfsaild can just set the target to max_ail_lsn on every
push that we see the wait queue active. Hence we no longer will
leave items on the AIL that are beyond the LSN sampled at the start
of a sync push.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
AIL flushing can get stuck here:
[316649.005769] INFO: task xfsaild/pmem1:324525 blocked for more than 123 seconds.
[316649.007807] Not tainted 5.17.0-rc6-dgc+ #975
[316649.009186] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[316649.011720] task:xfsaild/pmem1 state:D stack:14544 pid:324525 ppid: 2 flags:0x00004000
[316649.014112] Call Trace:
[316649.014841] <TASK>
[316649.015492] __schedule+0x30d/0x9e0
[316649.017745] schedule+0x55/0xd0
[316649.018681] io_schedule+0x4b/0x80
[316649.019683] xfs_buf_wait_unpin+0x9e/0xf0
[316649.021850] __xfs_buf_submit+0x14a/0x230
[316649.023033] xfs_buf_delwri_submit_buffers+0x107/0x280
[316649.024511] xfs_buf_delwri_submit_nowait+0x10/0x20
[316649.025931] xfsaild+0x27e/0x9d0
[316649.028283] kthread+0xf6/0x120
[316649.030602] ret_from_fork+0x1f/0x30
in the situation where flushing gets preempted between the unpin
check and the buffer trylock under nowait conditions:
blk_start_plug(&plug);
list_for_each_entry_safe(bp, n, buffer_list, b_list) {
if (!wait_list) {
if (xfs_buf_ispinned(bp)) {
pinned++;
continue;
}
Here >>>>>>
if (!xfs_buf_trylock(bp))
continue;
This means submission is stuck until something else triggers a log
force to unpin the buffer.
To get onto the delwri list to begin with, the buffer pin state has
already been checked, and hence it's relatively rare we get a race
between flushing and encountering a pinned buffer in delwri
submission to begin with. Further, to increase the pin count the
buffer has to be locked, so the only way we can hit this race
without failing the trylock is to be preempted between the pincount
check seeing zero and the trylock being run.
Hence to avoid this problem, just invert the order of trylock vs
pin check. We shouldn't hit that many pinned buffers here, so
optimising away the trylock for pinned buffers should not matter for
performance at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
After 963 iterations of generic/530, it deadlocked during recovery
on a pinned inode cluster buffer like so:
XFS (pmem1): Starting recovery (logdev: internal)
INFO: task kworker/8:0:306037 blocked for more than 122 seconds.
Not tainted 5.17.0-rc6-dgc+ #975
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/8:0 state:D stack:13024 pid:306037 ppid: 2 flags:0x00004000
Workqueue: xfs-inodegc/pmem1 xfs_inodegc_worker
Call Trace:
<TASK>
__schedule+0x30d/0x9e0
schedule+0x55/0xd0
schedule_timeout+0x114/0x160
__down+0x99/0xf0
down+0x5e/0x70
xfs_buf_lock+0x36/0xf0
xfs_buf_find+0x418/0x850
xfs_buf_get_map+0x47/0x380
xfs_buf_read_map+0x54/0x240
xfs_trans_read_buf_map+0x1bd/0x490
xfs_imap_to_bp+0x4f/0x70
xfs_iunlink_map_ino+0x66/0xd0
xfs_iunlink_map_prev.constprop.0+0x148/0x2f0
xfs_iunlink_remove_inode+0xf2/0x1d0
xfs_inactive_ifree+0x1a3/0x900
xfs_inode_unlink+0xcc/0x210
xfs_inodegc_worker+0x1ac/0x2f0
process_one_work+0x1ac/0x390
worker_thread+0x56/0x3c0
kthread+0xf6/0x120
ret_from_fork+0x1f/0x30
</TASK>
task:mount state:D stack:13248 pid:324509 ppid:324233 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x30d/0x9e0
schedule+0x55/0xd0
schedule_timeout+0x114/0x160
__down+0x99/0xf0
down+0x5e/0x70
xfs_buf_lock+0x36/0xf0
xfs_buf_find+0x418/0x850
xfs_buf_get_map+0x47/0x380
xfs_buf_read_map+0x54/0x240
xfs_trans_read_buf_map+0x1bd/0x490
xfs_imap_to_bp+0x4f/0x70
xfs_iget+0x300/0xb40
xlog_recover_process_one_iunlink+0x4c/0x170
xlog_recover_process_iunlinks.isra.0+0xee/0x130
xlog_recover_finish+0x57/0x110
xfs_log_mount_finish+0xfc/0x1e0
xfs_mountfs+0x540/0x910
xfs_fs_fill_super+0x495/0x850
get_tree_bdev+0x171/0x270
xfs_fs_get_tree+0x15/0x20
vfs_get_tree+0x24/0xc0
path_mount+0x304/0xba0
__x64_sys_mount+0x108/0x140
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
task:xfsaild/pmem1 state:D stack:14544 pid:324525 ppid: 2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x30d/0x9e0
schedule+0x55/0xd0
io_schedule+0x4b/0x80
xfs_buf_wait_unpin+0x9e/0xf0
__xfs_buf_submit+0x14a/0x230
xfs_buf_delwri_submit_buffers+0x107/0x280
xfs_buf_delwri_submit_nowait+0x10/0x20
xfsaild+0x27e/0x9d0
kthread+0xf6/0x120
ret_from_fork+0x1f/0x30
We have the mount process waiting on an inode cluster buffer read,
inodegc doing unlink waiting on the same inode cluster buffer, and
the AIL push thread blocked in writeback waiting for the inode
cluster buffer to become unpinned.
What has happened here is that the AIL push thread has raced with
the inodegc process modifying, committing and pinning the inode
cluster buffer here in xfs_buf_delwri_submit_buffers() here:
blk_start_plug(&plug);
list_for_each_entry_safe(bp, n, buffer_list, b_list) {
if (!wait_list) {
if (xfs_buf_ispinned(bp)) {
pinned++;
continue;
}
Here >>>>>>
if (!xfs_buf_trylock(bp))
continue;
Basically, the AIL has found the buffer wasn't pinned and got the
lock without blocking, but then the buffer was pinned. This implies
the processing here was pre-empted between the pin check and the
lock, because the pin count can only be increased while holding the
buffer locked. Hence when it has gone to submit the IO, it has
blocked waiting for the buffer to be unpinned.
With all executing threads now waiting on the buffer to be unpinned,
we normally get out of situations like this via the background log
worker issuing a log force which will unpinned stuck buffers like
this. But at this point in recovery, we haven't started the log
worker. In fact, the first thing we do after processing intents and
unlinked inodes is *start the log worker*. IOWs, we start it too
late to have it break deadlocks like this.
Avoid this and any other similar deadlock vectors in intent and
unlinked inode recovery by starting the log worker before we recover
intents and unlinked inodes. This part of recovery runs as though
the filesystem is fully active, so we really should have the same
infrastructure running as we normally do at runtime.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
We currently have a race where we recycle the selected buffer if poll
returns IO_APOLL_OK. But that's too late, as the poll could already be
triggering or have triggered. If that race happens, then we're putting a
buffer that's already being used.
Fix this by recycling before we arm poll. This does mean that we'll
sometimes almost instantly re-select the buffer, but it's rare enough in
testing that it should not pose a performance issue.
Fixes: b1c6264575 ("io_uring: recycle provided buffers if request goes async")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The cifs_demultiplexer_thread should only call cifs_reconnect.
If any other thread wants to trigger a reconnect, they can do
so by updating the server tcpStatus to CifsNeedReconnect.
The last patch attempted to use the same helper function for
both types of threads, but that causes other issues
with lock dependencies.
This patch creates a new helper for non-cifsd threads, that
will indicate to cifsd that the server needs reconnect.
Fixes: 2a05137a05 ("cifs: mark sessions for reconnection in helper function")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the spinlock around the tree traversal as we are calling possibly
sleeping functions.
We do not need a spinlock here as there will be no modifications to this
tree at this point.
This prevents warnings like this to occur in dmesg:
[ 653.774996] BUG: sleeping function called from invalid context at kernel/loc\
king/mutex.c:280
[ 653.775088] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1827, nam\
e: umount
[ 653.775152] preempt_count: 1, expected: 0
[ 653.775191] CPU: 0 PID: 1827 Comm: umount Tainted: G W OE 5.17.0\
-rc7-00006-g4eb628dd74df #135
[ 653.775195] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-\
1.fc33 04/01/2014
[ 653.775197] Call Trace:
[ 653.775199] <TASK>
[ 653.775202] dump_stack_lvl+0x34/0x44
[ 653.775209] __might_resched.cold+0x13f/0x172
[ 653.775213] mutex_lock+0x75/0xf0
[ 653.775217] ? __mutex_lock_slowpath+0x10/0x10
[ 653.775220] ? _raw_write_lock_irq+0xd0/0xd0
[ 653.775224] ? dput+0x6b/0x360
[ 653.775228] cifs_kill_sb+0xff/0x1d0 [cifs]
[ 653.775285] deactivate_locked_super+0x85/0x130
[ 653.775289] cleanup_mnt+0x32c/0x4d0
[ 653.775292] ? path_umount+0x228/0x380
[ 653.775296] task_work_run+0xd8/0x180
[ 653.775301] exit_to_user_mode_loop+0x152/0x160
[ 653.775306] exit_to_user_mode_prepare+0x89/0xd0
[ 653.775315] syscall_exit_to_user_mode+0x12/0x30
[ 653.775322] do_syscall_64+0x48/0x90
[ 653.775326] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 187af6e98b44e5d8f25e1d41a92db138eb54416f ("cifs: fix handlecache and multiuser")
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When session gets reconnected during mount then read size in super block fs context
gets set to zero and after negotiate, rsize is not modified which results in
incorrect read with requested bytes as zero. Fixes intermittent failure
of xfstest generic/240
Note that stable requires a different version of this patch which will be
sent to the stable mailing list.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ:1997367
When we collapse a range in smb3_collapse_range() we must make sure
we update the inode size and pagecache accordingly.
If not, both inode size and pagecahce may be stale until it is refreshed.
This can be demonstrated for the inode size by running :
xfs_io -i -f -c "truncate 320k" -c "fcollapse 64k 128k" -c "fiemap -v" \
/mnt/testfile
where we can see the result of stale data in the fiemap output.
The third line of the output is wrong, all this data should be truncated.
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: hole 128
1: [128..383]: 128..383 256 0x1
2: [384..639]: hole 256
And the correct output, when the inode size has been updated correctly should
look like this:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: hole 128
1: [128..383]: 128..383 256 0x1
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In multiuser each individual user has their own tcon structure for the
share and thus their own handle for a cached directory.
When we umount such a share we much make sure to release the pinned down dentry
for each such tcon and not just the master tcon.
Otherwise we will get nasty warnings on umount that dentries are still in use:
[ 3459.590047] BUG: Dentry 00000000115c6f41{i=12000000019d95,n=/} still in use\
(2) [unmount of cifs cifs]
...
[ 3459.590492] Call Trace:
[ 3459.590500] d_walk+0x61/0x2a0
[ 3459.590518] ? shrink_lock_dentry.part.0+0xe0/0xe0
[ 3459.590526] shrink_dcache_for_umount+0x49/0x110
[ 3459.590535] generic_shutdown_super+0x1a/0x110
[ 3459.590542] kill_anon_super+0x14/0x30
[ 3459.590549] cifs_kill_sb+0xf5/0x104 [cifs]
[ 3459.590773] deactivate_locked_super+0x36/0xa0
[ 3459.590782] cleanup_mnt+0x131/0x190
[ 3459.590789] task_work_run+0x5c/0x90
[ 3459.590798] exit_to_user_mode_loop+0x151/0x160
[ 3459.590809] exit_to_user_mode_prepare+0x83/0xd0
[ 3459.590818] syscall_exit_to_user_mode+0x12/0x30
[ 3459.590828] do_syscall_64+0x48/0x90
[ 3459.590833] entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=rhQe
-----END PGP SIGNATURE-----
Merge tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small fix for regression in multiuser mounts.
The additional improvements suggested by Ronnie to make the server and
session status handling code easier to read can wait for the 5.18
merge window."
* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix incorrect session setup check for multiuser mounts
The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.
Reported-by: Joel Jaeschke <joel.jaeschke@gmail.com>
Link: https://github.com/axboe/liburing/issues/549
Fixes: 16c8d2df7e ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In fill_thread_core_info() the ptrace accessible registers are collected
to be written out as notes in a core file. The note array is allocated
from a size calculated by iterating the user regset view, and counting the
regsets that have a non-zero core_note_type. However, this only allows for
there to be non-zero core_note_type at the end of the regset view. If
there are any gaps in the middle, fill_thread_core_info() will overflow the
note allocation, as it iterates over the size of the view and the
allocation would be smaller than that.
There doesn't appear to be any arch that has gaps such that they exceed
the notes allocation, but the code is brittle and tries to support
something it doesn't. It could be fixed by increasing the allocation size,
but instead just have the note collecting code utilize the array better.
This way the allocation can stay smaller.
Even in the case of no arch's that have gaps in their regset views, this
introduces a change in the resulting indicies of t->notes. It does not
introduce any changes to the core file itself, because any blank notes are
skipped in write_note_info().
In case, the allocation logic between fill_note_info() and
fill_thread_core_info() ever diverges from the usage logic, warn and skip
writing any notes that would overflow the array.
This fix is derrived from an earlier one[0] by Yu-cheng Yu.
[0] https://lore.kernel.org/lkml/20180717162502.32274-1-yu-cheng.yu@intel.com/
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220317192013.13655-4-rick.p.edgecombe@intel.com
Looks like a victim of too much copy/paste, we should not be looking
at req->open.how in accept. The point is to check CLOEXEC and error
out, which we don't invalid direct descriptors on exec. Hence any
attempt to get a direct descriptor with CLOEXEC is invalid.
No harm is done here, as req->open.how.flags overlaps with
req->accept.flags, but it's very confusing and might change if either of
those command structs are modified.
Fixes: aaa4db12ef ("io_uring: accept directly into fixed file table")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Let's enable GC_URGENT_HIGH mode during f2fs_disable_checkpoint(),
so that we can use SSR allocator for GCed data/node persistence,
it can improve the performance due to it avoiding migration of
data/node locates in selected target segment of SSR allocator.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When compressed file has blocks, f2fs_ioc_start_atomic_write will succeed,
but compressed flag will be remained in inode. If write partial compreseed
cluster and commit atomic write will cause data corruption.
This is the reproduction process:
Step 1:
create a compressed file ,write 64K data , call fsync(), then the blocks
are write as compressed cluster.
Step2:
iotcl(F2FS_IOC_START_ATOMIC_WRITE) --- this should be fail, but not.
write page 0 and page 3.
iotcl(F2FS_IOC_COMMIT_ATOMIC_WRITE) -- page 0 and 3 write as normal file,
Step3:
drop cache.
read page 0-4 -- Since page 0 has a valid block address, read as
non-compressed cluster, page 1 and 2 will be filled with compressed data
or zero.
The root cause is, after commit 7eab7a6968 ("f2fs: compress: remove
unneeded read when rewrite whole cluster"), in step 2, f2fs_write_begin()
only set target page dirty, and in f2fs_commit_inmem_pages(), we will write
partial raw pages into compressed cluster, result in corrupting compressed
cluster layout.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Fixes: 7eab7a6968 ("f2fs: compress: remove unneeded read when rewrite whole cluster")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to initialized sbi->gc_mode to GC_NORMAL explicitly.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When compiling with -Wformat, clang emits the following warnings:
fs/nfsd/flexfilelayout.c:120:27: warning: format specifies type 'unsigned
char' but the argument has type 'int' [-Wformat]
"%s.%hhu.%hhu", addr, port >> 8, port & 0xff);
~~~~ ^~~~~~~~~
%d
fs/nfsd/flexfilelayout.c:120:38: warning: format specifies type 'unsigned
char' but the argument has type 'int' [-Wformat]
"%s.%hhu.%hhu", addr, port >> 8, port & 0xff);
~~~~ ^~~~~~~~~~~
%d
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for ints and unsigned
ints.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Haynes <loghyr@hammerspace.com>
Workloads using provided buffers benefit from using and returning buffers
in the right order, and so does TLBs for that matter. Manage the internal
buffer list in a straight list, rather than use the head buffer as the
insertion node. Use a hashed list for the buffer group IDs instead of
xarray, the overhead is much lower this way. xarray provides internal
locking and other trickery that is handy for some uses cases, but
io_uring already locks internally for the buffer manipulation and needs
none of that.
This is good for about a 2% reduction in overhead, combination of the
improved management and the fact that the workload has an easier time
bundling back provided buffers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When renaming the whiteout file, the old whiteout file is not deleted.
Therefore, we add the old dentry size to the old dir like XFS.
Otherwise, an error may be reported due to `fscki->calc_sz != fscki->size`
in check_indes.
Fixes: 9e0a1fff8d ("ubifs: Implement RENAME_WHITEOUT")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails. That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.
Fix this issue by initializing filecheck kobj before setting s_root.
Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com
Fixes: 5f483c4abb ("ocfs2: add kobject for online file check")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need a mid level of gc urgent mode to do GC forcibly in a period
of given gc_urgent_sleep_time, but not like using greedy GC approach
and switching to SSR mode such as gc urgent high mode. This can be
used for more aggressive periodic storage clean up.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In lz4_decompress_pages(), if size of decompressed data is not equal to
expected one, we should print the size rather than size of target buffer
for decompressed data, fix it.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
iput() has already judged the incoming parameter, so there is
no need to repeat the judgment here.
Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
EROFS images should inherit modification time rather than change time,
since users and host tooling have no easy way to control change time.
To reflect the new timestamp meaning, i_ctime and i_ctime_nsec are
renamed to i_mtime and i_mtime_nsec.
Link: https://lore.kernel.org/r/20220311041829.3109511-1-dvander@google.com # v1
Signed-off-by: David Anderson <dvander@google.com>
[ Gao Xiang: update document as well. ]
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220317114959.106787-1-hsiangkao@linux.alibaba.com # v2
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
A recent change to how the SMB3 server (socket) and session status
is managed regressed multiuser mounts by changing the check
for whether session setup is needed to the socket (TCP_Server_info)
structure instead of the session struct (cifs_ses). Add additional
check in cifs_setup_sesion to fix this.
Fixes: 73f9bfbe3d ("cifs: maintain a state machine for tcp/smb/tcon sessions")
Reported-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add ->has_evfd flag, which is true IFF there is an eventfd attached, and
use it to hide io_eventfd_signal() into __io_commit_cqring_flush() and
combine fast checks in a single if. Also, gcc 11.2 wasn't inlining
io_cqring_ev_posted() without this change, so helps with that as well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f6168471997decded475a063f92915787975a30b.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_commit_cqring() is currently always under spinlock section, so it's
always better to keep it as slim as possible. Move
__io_commit_cqring_flush() out of it into ev_posted*(). If fast checks
do fail and this post-processing is required, we'll reacquire
->completion_lock, which is fine as we don't care about performance of
draining and offset timeouts.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ec4e81fd720d3bc7bca8cb9152e080dad1a052f1.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
smp_mb() in io_cqring_ev_posted_iopoll() is only there because of
waitqueue_active(). However, non-SQPOLL IOPOLL ring doesn't wake the CQ
and so the barrier there is useless. Kill it, it's usually pretty
expensive.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d72e8ef6f7a3f6a72e18fad8409f7d47afc8da7d.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's never a good idea to put provided buffers without notifying the
userspace, it'll lead to userspace leaks, so add io_put_kbuf() in
io_req_complete_failed(). The fail helper is called by all sorts of
requests, but it's still safe to do as io_put_kbuf() will return 0 in
for all requests that don't support and so don't expect provided buffers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a4880106fcf199d5810707fe2d17126fcdf18bc4.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_fill_cqe*() is not always the best way to post CQEs just because
there is enough of infrastructure on top. Replace a raw call to a
variant of it inside of io_timeout_cancel(), which also saves us some
bloating and might help with batching later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/46113ec4345764b4aef3b384ce38cceabaeedcbb.1647481208.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With commit "io_uring: cache req->apoll->events in req->cflags" applied,
we now have just io_poll_remove_entries() dipping into req->apoll when
it isn't strictly necessary.
Mark poll and double-poll with a flag, so we know if we need to look
at apoll->double_poll. This avoids pulling in those cachelines if we
don't need them. The common case is that the poll wake handler already
removed these entries while hot off the completion path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we arm poll on behalf of a different type of request, like a network
receive, then we allocate req->apoll as our poll entry. Running network
workloads shows io_poll_check_events() as the most expensive part of
io_uring, and it's all due to having to pull in req->apoll instead of
just the request which we have hot already.
Cache poll->events in req->cflags, which isn't used until the request
completes anyway. This isn't strictly needed for regular poll, where
req->poll.events is used and thus already hot, but for the sake of
unification we do it all around.
This saves 3-4% of overhead in certain request workloads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we mount a jffs2 image, assume that the first few blocks of
the image are normal and contain at least one xattr-related inode,
but the next block is abnormal. As a result, an error is returned
in jffs2_scan_eraseblock(). jffs2_clear_xattr_subsystem() is then
called in jffs2_build_filesystem() and then again in
jffs2_do_fill_super().
Finally we can observe the following report:
==================================================================
BUG: KASAN: use-after-free in jffs2_clear_xattr_subsystem+0x95/0x6ac
Read of size 8 at addr ffff8881243384e0 by task mount/719
Call Trace:
dump_stack+0x115/0x16b
jffs2_clear_xattr_subsystem+0x95/0x6ac
jffs2_do_fill_super+0x84f/0xc30
jffs2_fill_super+0x2ea/0x4c0
mtd_get_sb+0x254/0x400
mtd_get_sb_by_nr+0x4f/0xd0
get_tree_mtd+0x498/0x840
jffs2_get_tree+0x25/0x30
vfs_get_tree+0x8d/0x2e0
path_mount+0x50f/0x1e50
do_mount+0x107/0x130
__se_sys_mount+0x1c5/0x2f0
__x64_sys_mount+0xc7/0x160
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 719:
kasan_save_stack+0x23/0x60
__kasan_kmalloc.constprop.0+0x10b/0x120
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0x1c0/0x870
jffs2_alloc_xattr_ref+0x2f/0xa0
jffs2_scan_medium.cold+0x3713/0x4794
jffs2_do_mount_fs.cold+0xa7/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
Freed by task 719:
kmem_cache_free+0xcc/0x7b0
jffs2_free_xattr_ref+0x78/0x98
jffs2_clear_xattr_subsystem+0xa1/0x6ac
jffs2_do_mount_fs.cold+0x5e6/0x2253
jffs2_do_fill_super+0x383/0xc30
jffs2_fill_super+0x2ea/0x4c0
[...]
The buggy address belongs to the object at ffff8881243384b8
which belongs to the cache jffs2_xattr_ref of size 48
The buggy address is located 40 bytes inside of
48-byte region [ffff8881243384b8, ffff8881243384e8)
[...]
==================================================================
The triggering of the BUG is shown in the following stack:
-----------------------------------------------------------
jffs2_fill_super
jffs2_do_fill_super
jffs2_do_mount_fs
jffs2_build_filesystem
jffs2_scan_medium
jffs2_scan_eraseblock <--- ERROR
jffs2_clear_xattr_subsystem <--- free
jffs2_clear_xattr_subsystem <--- free again
-----------------------------------------------------------
An error is returned in jffs2_do_mount_fs(). If the error is returned
by jffs2_sum_init(), the jffs2_clear_xattr_subsystem() does not need to
be executed. If the error is returned by jffs2_build_filesystem(), the
jffs2_clear_xattr_subsystem() also does not need to be executed again.
So move jffs2_clear_xattr_subsystem() from 'out_inohash' to 'out_root'
to fix this UAF problem.
Fixes: aa98d7cf59 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
inode->i_mutex has been replaced with inode->i_rwsem long ago. Fix
comments still mentioning i_mutex.
Signed-off-by: hongnanli <hongnan.li@linux.alibaba.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This serves two purposes:
- We now have the last cacheline mostly unused for generic workloads,
instead of having to pull in the poll refs explicitly for workloads
that rely on poll arming.
- It shrinks the io_kiocb from 232 to 224 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With all implementations converted to ->dirty_folio, we can stop calling
this fallback method and remove it entirely.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a mechanical change.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
The comment about the page always being locked is wrong, so copy
the locking protection from __set_page_dirty_buffers(). That
means moving the call to nilfs_set_file_dirty() down the
function so as to not acquire a new dependency between the
mapping->private_lock and the ns_inode_lock. That might be a
harmless dependency to add, but it's not necessary.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This converts the remaining inode lookup part by using metabuf in a
straight-forward way. Except that it doesn't use kmap_atomic()
anymore since we now have to maintain two metabufs together.
After this patch, all uncompressed paths are handled with metabuf
instead of page structure.
Link: https://lore.kernel.org/r/20220316012246.95131-2-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, directory inodes are directly handled with page cache
interfaces.
In order to support sub-page directory blocks and folios, let's
convert them into the latest metabuf infrastructure as well and
this patch addresses the readdir case first.
Link: https://lore.kernel.org/r/20220316012246.95131-1-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Syzkaller hit 'WARNING: kobject bug in erofs_unregister_sysfs'. This bug
is triggered by injecting fault in kobject_init_and_add of
erofs_unregister_sysfs.
Fix this by adding sanity check for kobject in erofs_unregister_sysfs
Note that I've tested the patch and the crash does not occur any more.
Link: https://lore.kernel.org/r/20220315132814.12332-1-dzm91@hust.edu.cn
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Fixes: 168e9a7620 ("erofs: add sysfs interface")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Avoid the unnecessary tail recursion since it can be converted into
a loop directly in order to prevent potential stack overflow.
It's a pretty straightforward conversion.
Link: https://lore.kernel.org/r/20220310182743.102365-1-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Dan reported two smatch warnings [1],
.. warn: should '1 << lclusterbits' be a 64 bit type?
.. warn: should 'm->compressedlcs << lclusterbits' be a 64 bit type?
In practice, m_plen cannot be more than 1MiB due to on-disk constraint
for the compression mode, so we're always safe here.
In order to make static analyzers happy and not report again, let's
silence them instead.
[1] https://lore.kernel.org/r/202203091002.lJVzsX6e-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220310173448.19962-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Rename preload_compressed_pages() as z_erofs_bind_cache()
since we're trying to prepare for adapting folios.
Also, add a comment for the gfp setting. No logic changes.
Link: https://lore.kernel.org/r/20220301194951.106227-2-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Avoid `struct z_erofs_collector' since there is another context
structure called "struct z_erofs_decompress_frontend".
No logic changes.
Link: https://lore.kernel.org/r/20220301194951.106227-1-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The only change is that, meta buffers read cache page without __GFP_FS
flag, which shall not matter.
Link: https://lore.kernel.org/r/20220209060108.43051-7-jefflexu@linux.alibaba.com
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Commit 84c4e1f89f ("aio: simplify - and fix - fget/fput for io_submit()")
refactored aio_read() and some error cases into early return, which made
some intermediate assignment of the return variable needless.
Drop this needless assignment in aio_read().
No functional change. No change in resulting object code.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
separate the "cleanup" and "apply" codepaths (they have almost no overlap),
fold the "cleanup" into "prepare" (which eliminates the need of ->revert)
and make loops more idiomatic.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds commit_tid info in ext4_fc_commit_start/stop which is helpful
in debugging fast_commit issues.
For e.g. issues where due to jbd2 journal full commit, FC miss to commit
updates to a file.
Also improves TP_prink format string i.e. all ext4 and jbd2 trace events
starts with "dev MAjOR,MINOR". Let's follow the same convention while we
are still at it.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/ebcd6b9ab5b718db30f90854497886801ce38c63.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds commit_tid argument in ext4_fc_update_stats()
so that we can add this information too in jbd_debug logs.
This is also required in a later patch to pass the commit_tid info in
ext4_fc_commit_start/stop() trace events.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/dabda3f2919a60e01887e798bf5915216b451733.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds the transaction & inode tid info in trace events for
callers of ext4_fc_track_template(). This is helpful in debugging race
conditions where an inode could belong to two different transaction tids.
It also fixes the checkpatch warnings which says use tabs instead of
spaces.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c203c09dc11bb372803c430f621f25a4b8c2c8b4.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently ext4_fc_track_template() checks, whether the trace event
path belongs to replay or does sb has ineligible set, if yes it simply
returns. This patch pulls those checks before calling
ext4_fc_track_template() in the callers of ext4_fc_track_template().
[ Add checks to ext4_rename() which calls the __ext4_fc_track_*()
functions directly. -- TYT ]
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/3cd025d9c490218a92e6d8fb30b6123e693373e3.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
pstore_dump() is *always* invoked in atomic context (nowadays in an RCU
read-side critical section, before that under a spinlock).
It doesn't make sense to try to use semaphores here.
This is mostly a revert of commit ea84b580b9 ("pstore: Convert buf_lock
to semaphore"), except that two parts aren't restored back exactly as they
were:
- keep the lock initialization in pstore_register
- in efi_pstore_write(), always set the "block" flag to false
- omit "is_locked", that was unnecessary since
commit 959217c84c ("pstore: Actually give up during locking failure")
- fix the bailout message
The actual problem that the buggy commit was trying to address may have
been that the use of preemptible() in efi_pstore_write() was wrong - it
only looks at preempt_count() and the state of IRQs, but __rcu_read_lock()
doesn't touch either of those under CONFIG_PREEMPT_RCU.
(Sidenote: CONFIG_PREEMPT_RCU means that the scheduler can preempt tasks in
RCU read-side critical sections, but you're not allowed to actively
block/reschedule.)
Lockdep probably never caught the problem because it's very rare that you
actually hit the contended case, so lockdep always just sees the
down_trylock(), not the down_interruptible(), and so it can't tell that
there's a problem.
Fixes: ea84b580b9 ("pstore: Convert buf_lock to semaphore")
Cc: stable@vger.kernel.org
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220314185953.2068993-1-jannh@google.com
Particularly for networked workloads, io_uring intensively uses its
poll based backend to get a notification when data/space is available.
Profiling workloads, we see 3-4% of alloc+free that is directly attributed
to just the apoll allocation and free (and the rest being skb alloc+free).
For the fast path, we have ctx->uring_lock held already for both issue
and the inline completions, and we can utilize that to avoid any extra
locking needed to have a basic recycling cache for the apoll entries on
both the alloc and free side.
Double poll still requires an allocation. But those are rare and not
a fast path item.
With the simple cache in place, we see a 3-4% reduction in overhead for
the workload.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Smatch complains:
fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs()
warn: no lower bound on 'args->len'
Change the type to unsigned to prevent this issue.
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Removes several calls to __set_page_dirty_nobuffers(). Also turn the
PageSwapCache() case into a BUG() as there's no way for a swapcache page
to make it to a filesystem that doesn't use SWP_FS_OPS.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a trivial change.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This removes a call to __set_page_dirty_nobuffers().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
These filesystems use __set_page_dirty_nobuffers() either directly or
with a very thin wrapper; convert them en masse.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Optimise the non-DEBUG case to just call filemap_dirty_folio
directly. The DEBUG case doesn't actually compile, but convert
it to dirty_folio anyway.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Convert all users of fscache_set_page_dirty to use fscache_dirty_folio.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
OrangeFS launders its pages from a number of locations, so add a
small amount of folio usage to its callers where it makes sense.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
We don't need to use page_file_mapping() here because launder_folio
is never called for swap cache pages. We also don't need to
cast an loff_t in order to print it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Straightforward conversion although the helper functions still assume
a single page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Trivial conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a straightfoward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Print the folio index instead of the pointer, since this is more
useful. We also don't need to use page_file_mapping() as we do not
invalidate swapcache pages. Since this is the only caller of
nfs_wb_page_cancel(), convert it to nfs_wb_folio_cancel().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a minimal change which just accepts the new arguments and passes
the single struct page to the functions which do the work. There is
very little progress here toards making f2fs support large folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Extensive changes, but fairly mechanical.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
A straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
A straightforward conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Mostly a straightforward conversion. Delete the pointer from the
debugging output as this has no value.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
A lot of the underlying infrastructure in btrfs needs to be switched
over to folios, but this at least documents that invalidatepage can't
be passed a tail page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
We know the page is in the page cache, not the swap cache. If we ever
support folios larger than 2GB, afs_invalidate_dirty() will need to be
fixed, but that's a larger project.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Use folio->index instead of folio_index() because there's no way we're
writing a page from the swapcache to a directory.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This is a trivial conversion.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
We used to have to use noop_invalidatepage() to prevent
block_invalidatepage() from being called, but that behaviour is now gone.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Remove special-casing of a NULL invalidatepage, since there is no
more block_invalidatepage.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Use iomap_invalidate_folio() in all the iomap-based filesystems
and rename the iomap_invalidatepage tracepoint.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Instead of calling ->invalidatepage directly, use folio_invalidate().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Instead of calling ->invalidatepage directly, use folio_invalidate().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Instead of calling ->invalidatepage directly, use folio_invalidate().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
Commit 0bf6276392 ("x32: Warn and disable rather than error if
binutils too old") added a small test in arch/x86/Makefile because
binutils 2.22 or newer is needed to properly support elf32-x86-64. This
check is no longer necessary, as the minimum supported version of
binutils is 2.23, which is enforced at configuration time with
scripts/min-tool-version.sh.
Remove this check and replace all uses of CONFIG_X86_X32 with
CONFIG_X86_X32_ABI, as two symbols are no longer necessary.
[nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still
used, and simplify commit message to satisfy -tip requirements]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org
Since the uptodate property is maintained on a per-folio basis, the
is_partially_uptodate method should also take a folio. Fix the types
at the same time so it's clear that it returns true/false and takes
the count in bytes, not blocks.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
We have the struct file in generic_remap_file_range_prep() already;
we just need to pass it around instead of the inode.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
This tracepoint is defined to take an offset in the file, not an
offset in the folio.
Fixes: 1ac994525b ("iomap: Remove pgoff from tracepoints")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
The symbol xfs_name_dotdot is a global variable that the xfs codebase
uses here and there to look up directory dotdot entries. Currently it's
a non-const variable, which means that it's a mutable global variable.
So far nobody's abused this to cause problems, but let's use the
compiler to enforce that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Various directory functions do not modify their @name parameter,
so mark it const to make that clear. This will enable us to mark
the global xfs_name_dotdot variable as const to prevent mischief.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
XFS does not reserve quota for directory expansion when renaming
children into a directory. This means that we don't reject the
expansion with EDQUOT when we're at or near a hard limit, which means
that unprivileged userspace can use rename() to exceed quota.
Rename operations don't always expand the target directory, and we allow
a rename to proceed with no space reservation if we don't need to add a
block to the target directory to handle the addition. Moreover, the
unlink operation on the source directory generally does not expand the
directory (you'd have to free a block and then cause a btree split) and
it's probably of little consequence to leave the corner case that
renaming a file out of a directory can increase its size.
As with link and unlink, there is a further bug in that we do not
trigger the blockgc workers to try to clear space when we're out of
quota.
Because rename is its own special tricky animal, we'll patch xfs_rename
directly to reserve quota to the rename transaction. We'll leave
cleaning up the rest of xfs_rename for the metadata directory tree
patchset.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
XFS does not reserve quota for directory expansion when linking or
unlinking children from a directory. This means that we don't reject
the expansion with EDQUOT when we're at or near a hard limit, which
means that unprivileged userspace can use link()/unlink() to exceed
quota.
The fix for this is nuanced -- link operations don't always expand the
directory, and we allow a link to proceed with no space reservation if
we don't need to add a block to the directory to handle the addition.
Unlink operations generally do not expand the directory (you'd have to
free a block and then cause a btree split) and we can defer the
directory block freeing if there is no space reservation.
Moreover, there is a further bug in that we do not trigger the blockgc
workers to try to clear space when we're out of quota.
To fix both cases, create a new xfs_trans_alloc_dir function that
allocates the transaction, locks and joins the inodes, and reserves
quota for the directory. If there isn't sufficient space or quota,
we'll switch the caller to reservationless mode. This should prevent
quota usage overruns with the least restriction in functionality.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Combine if tests to reduce the indentation levels of the quota chown
calls in xfs_setattr_nonsize.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Filipe Manana pointed out that XFS' behavior w.r.t. setuid/setgid
revocation isn't consistent with btrfs[1] or ext4. Those two
filesystems use the VFS function setattr_copy to convey certain
attributes from struct iattr into the VFS inode structure.
Andrey Zhadchenko reported[2] that XFS uses the wrong user namespace to
decide if it should clear setgid and setuid on a file attribute update.
This is a second symptom of the problem that Filipe noticed.
XFS, on the other hand, open-codes setattr_copy in xfs_setattr_mode,
xfs_setattr_nonsize, and xfs_setattr_time. Regrettably, setattr_copy is
/not/ a simple copy function; it contains additional logic to clear the
setgid bit when setting the mode, and XFS' version no longer matches.
The VFS implements its own setuid/setgid stripping logic, which
establishes consistent behavior. It's a tad unfortunate that it's
scattered across notify_change, should_remove_suid, and setattr_copy but
XFS should really follow the Linux VFS. Adapt XFS to use the VFS
functions and get rid of the old functions.
[1] https://lore.kernel.org/fstests/CAL3q7H47iNQ=Wmk83WcGB-KBJVOEtR9+qGczzCeXJ9Y2KCV25Q@mail.gmail.com/
[2] https://lore.kernel.org/linux-xfs/20220221182218.748084-1-andrey.zhadchenko@virtuozzo.com/
Fixes: 7fa294c899 ("userns: Allow chown and setgid preservation")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
It's counter-intuitive (and wrong) to put the block group _before_ the
final usage in submit_eb_page. Fix it by re-ordering the call to
btrfs_put_block_group after its final reference. Also fix a minor typo
in 'implies'
Fixes: be1a1d7a5d ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Syzbot reported a possible use-after-free in printing information
in device_list_add.
Very similar with the bug fixed by commit 0697d9a610 ("btrfs: don't
access possibly stale fs_info data for printing duplicate device"),
but this time the use occurs in btrfs_info_in_rcu.
Call Trace:
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
btrfs_printk+0x395/0x425 fs/btrfs/super.c:244
device_list_add.cold+0xd7/0x2ed fs/btrfs/volumes.c:957
btrfs_scan_one_device+0x4c7/0x5c0 fs/btrfs/volumes.c:1387
btrfs_control_ioctl+0x12a/0x2d0 fs/btrfs/super.c:2409
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix this by modifying device->fs_info to NULL too.
Reported-and-tested-by: syzbot+82650a4e0ed38f218363@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a previous patch ("btrfs: extend locking to all space_info members
accesses") the locking for the space_info members was extended in
btrfs_preempt_reclaim_metadata_space because not all the member
accesses that needed locks were actually locked (bytes_pinned et al).
It was then suggested to also add a call to lockdep_assert_held to
need_preemptive_reclaim. This function also works with space_info
members. As of now, it has only two call sites which both hold the lock.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a bug report that a bitflip in the transid part of an extent
buffer makes btrfs to reject certain tree blocks:
BTRFS error (device dm-0): parent transid verify failed on 1382301696 wanted 262166 found 22
[CAUSE]
Note the failed transid check, hex(262166) = 0x40016, while
hex(22) = 0x16.
It's an obvious bitflip.
Furthermore, the reporter also confirmed the bitflip is from the
hardware, so it's a real hardware caused bitflip, and such problem can
not be detected by the existing tree-checker framework.
As tree-checker can only verify the content inside one tree block, while
generation of a tree block can only be verified against its parent.
So such problem remain undetected.
[FIX]
Although tree-checker can not verify it at write-time, we still have a
quick (but not the most accurate) way to catch such obvious corruption.
Function csum_one_extent_buffer() is called before we submit metadata
write.
Thus it means, all the extent buffer passed in should be dirty tree
blocks, and should be newer than last committed transaction.
Using that we can catch the above bitflip.
Although it's not a perfect solution, as if the corrupted generation is
higher than the correct value, we have no way to catch it at all.
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Link: https://lore.kernel.org/linux-btrfs/2dfcbc130c55cc6fd067b93752e90bd2b079baca.camel@scientia.org/
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@sus,ree.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is one oddball error handling of btrfs_read_buffer():
ret = btrfs_read_buffer(tmp, gen, parent_level - 1, &first_key);
if (!ret) {
*eb_ret = tmp;
return 0;
}
free_extent_buffer(tmp);
btrfs_release_path(p);
return -EIO;
While all other call sites check the error first. Unify the behavior.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We had an error handling pattern for read_tree_block() like this:
eb = read_tree_block();
if (IS_ERR(eb)) {
/*
* Handling error here
* Normally ended up with return or goto out.
*/
} else if (!extent_buffer_uptodate(eb)) {
/*
* Different error handling here
* Normally also ended up with return or goto out;
*/
}
This is fine, but if we want to add extra check for each
read_tree_block(), the existing if-else-if is not that expandable and
will take reader some seconds to figure out there is no extra branch.
Here we change it to a more common way, without the extra else:
eb = read_tree_block();
if (IS_ERR(eb)) {
/*
* Handling error here
*/
return eb or goto out;
}
if (!extent_buffer_uptodate(eb)) {
/*
* Different error handling here
*/
return eb or goto out;
}
This also removes some oddball call sites which uses some creative way
to check error.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_free_extent() does all of the hard work of updating the extent
ref items, and then at the end if we dropped the extent completely it
does the cleanup accounting work. We're going to only want to do that
work for metadata with extent tree v2, so extract this bit into its own
helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a remnant of the work I did for qgroups a long time ago to only
run for a block when we had dropped the last ref. We haven't done that
for years, but the code remains. Drop this remnant.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We duplicate this logic for both data and metadata, at this point we've
already done our type specific extent root operations, this is just
doing the accounting and removing the space from the free space tree.
Extract this common logic out into a helper.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Switch this to an ASSERT() and return the error in the normal case.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During log replay there is this pattern of running delayed items after
every inode unlink. To avoid repeating this several times, move the
logic into an helper function and use it instead of calling
btrfs_unlink_inode() followed by btrfs_run_delayed_items().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bytes_pinned is always accessed under space_info->lock, except in
btrfs_preempt_reclaim_metadata_space, however the other members are
accessed under that lock. The reserved member of the rsv's are also
partially accessed under a lock and partially not. Move all these
accesses into the same lock to ensure consistency.
This could potentially race and lead to a flush instead of a commit but
it's not a big problem as it's only for preemptive flush.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a hung_task issue with running generic/068 on an SMR
device. The hang occurs while a process is trying to thaw the
filesystem. The process is trying to take sb->s_umount to thaw the
FS. The lock is held by fsstress, which calls btrfs_sync_fs() and is
waiting for an ordered extent to finish. However, as the FS is frozen,
the ordered extents never finish.
Having an ordered extent while the FS is frozen is the root cause of
the hang. The ordered extent is initiated from btrfs_relocate_chunk()
which is called from btrfs_reclaim_bgs_work().
This commit adds sb_*_write() around btrfs_relocate_chunk() call
site. For the usual "btrfs balance" command, we already call it with
mnt_want_file() in btrfs_ioctl_balance().
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.13+
Link: https://github.com/naota/linux/issues/56
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we disallow reflink and dedupe if the two files aren't on the
same vfsmount. However we really only need to disallow it if they're
not on the same super block. It is very common for btrfs to have a main
subvolume that is mounted and then different subvolumes mounted at
different locations. It's allowed to reflink between these volumes, but
the vfsmount check disallows this. Instead fix dedupe to check for the
same superblock, and simply remove the vfsmount check for reflink as it
already does the superblock check.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The sb check is already done in do_clone_file_range, and the mnt check
(which will hopefully go away in a subsequent patch) is done in
ioctl_file_clone(). Remove the check in our code and put an ASSERT() to
make sure it doesn't change underneath us.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need a root here, we just need the btrfs_fs_info, we can just
get the specific roots we need from fs_info.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're passing a root around here, but we only really need the fs_info,
so fix up btrfs_clean_one_deleted_snapshot() to take an fs_info instead,
and then fix up all the callers appropriately.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a filesystem goes read-only due to an error, multiple errors tend
to be reported, some of which are knock-on failures. Logging fs_states,
in btrfs_handle_fs_error() and btrfs_printk() helps distinguish the
first error from subsequent messages which may only exist due to an
error state.
Under the new format, most initial errors will look like:
`BTRFS: error (device loop0) in ...`
while subsequent errors will begin with:
`error (device loop0: state E) in ...`
An initial transaction abort error will look like
`error (device loop0: state A) in ...`
and subsequent messages will contain
`(device loop0: state EA) in ...`
In addition to the error states we can also print other states that are
temporary, like remounting, device replace, or indicate a global state
that may affect functionality.
Now implemented:
E - filesystem error detected
A - transaction aborted
L - log tree errors
M - remounting in progress
R - device replace in progress
C - data checksums not verified (mounted with ignoredatacsums)
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Smatch complains about a possible dereference of a pointer that was not
initialized:
CC [M] fs/btrfs/reflink.o
CHECK fs/btrfs/reflink.c
fs/btrfs/reflink.c:533 btrfs_clone() error: potentially dereferencing uninitialized 'trans'.
This is because we are not dealing with the case where the type of a file
extent has an unexpected value (not regular, not prealloc and not inline),
in which case the transaction handle pointer is not initialized.
Such unexpected type should be impossible, except in case of some memory
corruption caused either by bad hardware or some software bug causing
something like a buffer overrun.
So ASSERT that if the extent type is neither regular nor prealloc, then
it must be inline. Bail out with -EUCLEAN and a warning in case it is
not. This silences smatch.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reflinking an inline extent, we assert that its file offset is 0 and
that its uncompressed length is not greater than the sector size. We then
return an error if one of those conditions is not satisfied. However we
use a return statement, which results in returning from btrfs_clone()
without freeing the path and buffer that were allocated before, as well as
not clearing the flag BTRFS_INODE_NO_DELALLOC_FLUSH for the destination
inode.
Fix that by jumping to the 'out' label instead, and also add a WARN_ON()
for each condition so that in case assertions are disabled, we get to
known which of the unexpected conditions triggered the error.
Fixes: a61e1e0df9 ("Btrfs: simplify inline extent handling when doing reflinks")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When an inode has a last_reflink_trans matching the current transaction,
we have to take special care when logging its checksums in order to
avoid getting checksum items with overlapping ranges in a log tree,
which could result in missing checksums after log replay (more on that
in the changelogs of commit 40e046acbd ("Btrfs: fix missing data
checksums after replaying a log tree") and commit e289f03ea7 ("btrfs:
fix corrupt log due to concurrent fsync of inodes with shared extents")).
We also need to make sure a full fsync will copy all old file extent
items it finds in modified leaves, because they might have been copied
from some other inode.
However once we fsync an inode, we don't need to keep paying the price of
that extra special care in future fsyncs done in the same transaction,
unless the inode is used for another reflink operation or the full sync
flag is set on it (truncate, failure to allocate extent maps for holes,
and other exceptional and infrequent cases).
So after we fsync an inode reset its last_unlink_trans to zero. In case
another reflink happens, we continue to update the last_reflink_trans of
the inode, just as before. Also set last_reflink_trans to the generation
of the last transaction that modified the inode whenever we need to set
the full sync flag on the inode, just like when we need to load an inode
from disk after eviction.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Doing a full fsync may require processing many leaves of metadata, which
can take some time and result in a task monopolizing a cpu for too long.
So add a cond_resched() after processing a leaf when doing a full fsync,
while not holding any locks on any tree (a subvolume or a log tree).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a full fsync, at copy_items(), we iterate over all extents and
then collect their checksums into a list. After copying all the extents to
the log tree, we then log all the previously collected checksums.
Before the previous patch in the series (subject "btrfs: stop copying old
file extents when doing a full fsync"), we had to do it this way, because
while we were iterating over the items in the leaf of the subvolume tree,
we were holding a write lock on a leaf of the log tree, so logging the
checksums for an extent right after we collected them could result in a
deadlock, in case the checksum items ended up in the same leaf.
However after the previous patch in the series we now do a first iteration
over all the items in the leaf of the subvolume tree before locking a path
in the log tree, so we can now log the checksums right after we have
obtained them. This avoids holding in memory all checksums for all extents
in the leaf while copying items from the source leaf to the log tree. The
amount of memory used to hold all checksums of the extents in a leaf can
be significant. For example if a leaf has 200 file extent items referring
to 1M extents, using the default crc32c checksums, would result in using
over 200K of memory (not accounting for the extra overhead of struct
btrfs_ordered_sum), with smaller or less extents it would be less, but
it could be much more with more extents per leaf and/or much larger
extents.
So change copy_items() to log the checksums for an extent after looking
them up, and then free their memory, as they are no longer necessary.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an inode in full sync mode, we go over every leaf that was
modified in the current transaction and has items associated to our inode,
and then copy all those items into the log tree. This includes copying
file extent items that were created and added to the inode in past
transactions, which is useless and only makes use more leaf space in the
log tree.
It's common to have a file with many file extent items spanning many
leaves where only a few file extent items are new and need to be logged,
and in such case we log all the file extent items we find in the modified
leaves.
So change the full sync behaviour to skip over file extent items that are
not needed. Those are the ones that match the following criteria:
1) Have a generation older than the current transaction and the inode
was not a target of a reflink operation, as that can copy file extent
items from a past generation from some other inode into our inode, so
we have to log them;
2) Start at an offset within i_size - we must log anything at or beyond
i_size, otherwise we would lose prealloc extents after log replay.
The following script exercises a scenario where this happens, and it's
somehow close enough to what happened often on a SQL Server workload which
I had to debug sometime ago to fix an issue where a pattern of writes to
prealloc extents and fsync resulted in fsync failing with -EIO (that was
commit ea7036de0d ("btrfs: fix fsync failure and transaction abort
after writes to prealloc extents")). In that particular case, we had large
files that had random writes and were often truncated, which made the
next fsync be a full sync.
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
MKFS_OPTIONS="-O no-holes -R free-space-tree"
MOUNT_OPTIONS="-o ssd"
FILE_SIZE=$((1 * 1024 * 1024 * 1024)) # 1G
# FILE_SIZE=$((2 * 1024 * 1024 * 1024)) # 2G
# FILE_SIZE=$((512 * 1024 * 1024)) # 512M
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
# Create a file with many extents. Use direct IO to make it faster
# to create the file - using buffered IO we would have to fsync
# after each write (terribly slow).
echo "Creating file with $((FILE_SIZE / 4096)) extents of 4K each..."
xfs_io -f -d -c "pwrite -b 4K 0 $FILE_SIZE" $MNT/foobar
# Commit the transaction, so every extent after this is from an
# old generation.
sync
# Now rewrite only a few extents, which are all far spread apart from
# each other (e.g. 1G / 32M = 32 extents).
# After this only a few extents have a new generation, while all other
# ones have an old generation.
echo "Rewriting $((FILE_SIZE / (32 * 1024 * 1024))) extents..."
for ((i = 0; i < $FILE_SIZE; i += $((32 * 1024 * 1024)))); do
xfs_io -c "pwrite $i 4K" $MNT/foobar >/dev/null
done
# Fsync, the inode logged in full sync mode since it was never fsynced
# before.
echo "Fsyncing file..."
xfs_io -c "fsync" $MNT/foobar
umount $MNT
And the following bpftrace program was running when executing the test
script:
$ cat bpf-script.sh
#!/usr/bin/bpftrace
k:btrfs_log_inode
{
@start_log_inode[tid] = nsecs;
}
kr:btrfs_log_inode
/@start_log_inode[tid]/
{
@log_inode_dur[tid] = (nsecs - @start_log_inode[tid]) / 1000;
delete(@start_log_inode[tid]);
}
k:btrfs_sync_log
{
@start_sync_log[tid] = nsecs;
}
kr:btrfs_sync_log
/@start_sync_log[tid]/
{
$sync_log_dur = (nsecs - @start_sync_log[tid]) / 1000;
printf("btrfs_log_inode() took %llu us\n", @log_inode_dur[tid]);
printf("btrfs_sync_log() took %llu us\n", $sync_log_dur);
delete(@start_sync_log[tid]);
delete(@log_inode_dur[tid]);
exit();
}
With 512M test file, before this patch:
btrfs_log_inode() took 15218 us
btrfs_sync_log() took 1328 us
Log tree has 17 leaves and 1 node, its total size is 294912 bytes.
With 512M test file, after this patch:
btrfs_log_inode() took 14760 us
btrfs_sync_log() took 588 us
Log tree has a single leaf, its total size is 16K.
With 1G test file, before this patch:
btrfs_log_inode() took 27301 us
btrfs_sync_log() took 1767 us
Log tree has 33 leaves and 1 node, its total size is 557056 bytes.
With 1G test file, after this patch:
btrfs_log_inode() took 26166 us
btrfs_sync_log() took 593 us
Log tree has a single leaf, its total size is 16K
With 2G test file, before this patch:
btrfs_log_inode() took 50892 us
btrfs_sync_log() took 3127 us
Log tree has 65 leaves and 1 node, its total size is 1081344 bytes.
With 2G test file, after this patch:
btrfs_log_inode() took 50126 us
btrfs_sync_log() took 586 us
Log tree has a single leaf, its total size is 16K.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to submit a bio for whatever reason, we may not have setup a
mirror_num for that bio. This means we shouldn't try to do the repair
workflow, if we do we'll hit an BUG_ON(!failrec->this_mirror) in
clean_io_failure. Instead simply skip the repair workflow if we have no
mirror set, and add an assert to btrfs_check_repairable() to make it
easier to catch what is happening in the future.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I hit some weird panics while fixing up the error handling from
btrfs_lookup_bio_sums(). Turns out the compression path will complete
the bio we use if we set up any of the compression bios and then return
an error, and then btrfs_submit_data_bio() will also call bio_endio() on
the bio.
Fix this by making btrfs_submit_compressed_read() responsible for
calling bio_endio() on the bio if there are any errors. Currently it
was only doing it if we created the compression bios, otherwise it was
depending on btrfs_submit_data_bio() to do the right thing. This
creates the above problem, so fix up btrfs_submit_compressed_read() to
always call bio_endio() in case of an error, and then simply return from
btrfs_submit_data_bio() if we had to call
btrfs_submit_compressed_read().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Right now we just have a binary "errors" flag, so any error we get on
the compressed bio's gets translated to EIO. This isn't necessarily a
bad thing, but if we get an ENOMEM it may be nice to know that's what
happened instead of an EIO. Track our errors as a blk_status_t, and do
the appropriate setting of the errors accordingly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This bio is usually one of the compressed bio's, and we don't actually
need it in this function, so remove the argument and stop passing it
around.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit c09abff87f ("btrfs: cloned bios must not be iterated by
bio_for_each_segment_all") added ASSERT()'s to make sure we weren't
calling bio_for_each_segment_all() on a RAID5/6 bio. However it was
checking the bio that the compression code passed in, not the
cb->orig_bio that we actually iterate over, so adjust this ASSERT() to
check the correct bio.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently any error we get while trying to lookup csums during reads
shows up as a missing csum, and then on the read completion side we
print an error saying there was a csum mismatch and we increase the
device corruption count.
However we could have gotten an EIO from the lookup. We could also be
inside of a memory constrained container and gotten a ENOMEM while
trying to do the read. In either case we don't want to make this look
like a file system corruption problem, we want to make it look like the
actual error it is. Capture any negative value, convert it to the
appropriate blk_status_t, free the csum array if we have one and bail.
Note: a possible improvement would be to make the relocation code look
up the owning inode and see if it's marked as NODATASUM and set
EXTENT_NODATASUM there, that way if there's corruption and there isn't a
checksum when we want it we can fail here rather than later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can either fail to find a csum entry at all and return -ENOENT, or we
can find a range that is close, but return -EFBIG. In essence these
both mean the same thing when we are doing a lookup for a csum in an
existing range, we didn't find a csum. We want to treat both of these
errors the same way, complain loudly that there wasn't a csum. This
currently happens anyway because we do
count = search_csum_tree();
if (count <= 0) {
// reloc and error handling
}
However it forces us to incorrectly treat EIO or ENOMEM errors as on
disk corruption. Fix this by returning 0 if we get either -ENOENT or
-EFBIG from btrfs_lookup_csum() so we can do proper error handling.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The implementation resembles direct I/O: we have to flush any ordered
extents, invalidate the page cache, and do the io tree/delalloc/extent
map/ordered extent dance. From there, we can reuse the compression code
with a minor modification to distinguish the write from writeback. This
also creates inline extents when possible.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are 4 main cases:
1. Inline extents: we copy the data straight out of the extent buffer.
2. Hole/preallocated extents: we fill in zeroes.
3. Regular, uncompressed extents: we read the sectors we need directly
from disk.
4. Regular, compressed extents: we read the entire compressed extent
from disk and indicate what subset of the decompressed extent is in
the file.
This initial implementation simplifies a few things that can be improved
in the future:
- Cases 1, 3, and 4 allocate temporary memory to read into before
copying out to userspace.
- We don't do read repair, because it turns out that read repair is
currently broken for compressed data.
- We hold the inode lock during the operation.
Note that we don't need to hold the mmap lock. We may race with
btrfs_page_mkwrite() and read the old data from before the page was
dirtied:
btrfs_page_mkwrite btrfs_encoded_read
---------------------------------------------------
(enter) (enter)
btrfs_wait_ordered_range
lock_extent_bits
btrfs_page_set_dirty
unlock_extent_cached
(exit)
lock_extent_bits
read extent (dirty page hasn't been flushed,
so this is the old data)
unlock_extent_cached
(exit)
we read the old data from before the page was dirtied. But, that's true
even if we were to hold the mmap lock:
btrfs_page_mkwrite btrfs_encoded_read
-------------------------------------------------------------------
(enter) (enter)
btrfs_inode_lock(BTRFS_ILOCK_MMAP)
down_read(i_mmap_lock) (blocked)
btrfs_wait_ordered_range
lock_extent_bits
read extent (page hasn't been dirtied,
so this is the old data)
unlock_extent_cached
btrfs_inode_unlock(BTRFS_ILOCK_MMAP)
down_read(i_mmap_lock) returns
lock_extent_bits
btrfs_page_set_dirty
unlock_extent_cached
In other words, this is inherently racy, so it's fine that we return the
old data in this tiny window.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, an inline extent is always created after i_size is extended
from btrfs_dirty_pages(). However, for encoded writes, we only want to
update i_size after we successfully created the inline extent. Add an
update_i_size parameter to cow_file_range_inline() and
insert_inline_extent() and pass in the size of the extent rather than
determining it from i_size.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
The start parameter to cow_file_range_inline() (and
insert_inline_extent()) is always 0, so get rid of it and simplify the
logic in those two functions. Pass btrfs_inode to insert_inline_extent()
and remove the redundant root parameter. Also document the requirements
for creating an inline extent. No functional change.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we always reserve the same extent size in the file and extent
size on disk for delalloc because the former is the worst case for the
latter. For BTRFS_IOC_ENCODED_WRITE writes, we know the exact size of
the extent on disk, which may be less than or greater than (for
bookends) the size in the file. Add a disk_num_bytes parameter to
btrfs_delalloc_reserve_metadata() so that we can reserve the correct
amount of csum bytes. No functional change.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pavel Skripkin
Trond Myklebust
Paulo Alcantara
Linus Torvalds
Jens Axboe
Darrick J. Wong
Matthew Wilcox (Oracle)
Chao Yu
Daeho Jeong
Olga Kornievskaia
Xiubo Li
Dan Carpenter
Venky Shankar
Almog Khaikin
Jakob Koschel
Tobias Klauser
Dave Chinner
Shyam Prasad N
Ronnie Sahlberg
Rohith Surabattula
Rick Edgecombe
Fengnan Chang
Julia Lawall
David Howells
Jeffle Xu
Bill Wendling
Baokun Li
Joseph Qi
Wang Xiaojun
Jaegeuk Kim
David Anderson
Steve French
Pavel Begunkov
hongnanli
Gao Xiang
Dongliang Mu
Lukas Bulwahn
Al Viro
Theodore Ts'o
Ritesh Harjani
Jann Horn
Masahiro Yamada
Nikolay Borisov
Niels Dossche
Qu Wenruo
Josef Bacik
Filipe Manana
Naohiro Aota
Sweet Tea Dorminy
Omar Sandoval