commit e27f05147b upstream.
Using new PAHOLE_FLAGS variable to pass extra arguments to
pahole for both vmlinux and modules BTF data generation.
Adding new scripts/pahole-flags.sh script that detect and
prints pahole options.
[ fixed issues found by kernel test robot ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211029125729.70002-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With CONFIG_LTO_CLANG, we currently link modules into native
code just before modpost, which means with TRIM_UNUSED_KSYMS
enabled, we still look at the LLVM bitcode in the .o files when
generating the list of used symbols. As the bitcode doesn't
yet have calls to compiler intrinsics and llvm-nm doesn't see
function references that only exist in function-level inline
assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to
work with LTO.
This change moves module LTO linking to happen earlier, and
thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS
entirely, allowing us to also drop the whitelist from
gen_autoksyms.sh.
Link: https://github.com/ClangBuiltLinux/linux/issues/1369
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmDon90VHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGWFUP/RGNwlGD/YV1xg0ZmM0/ynBzzOy2
3dcr3etJZpipQDeqnHy3jt0esgMVlbkTdrHvP+2hpNaeXFwjF1fDHjhur9m8ZkVD
efOA6nugOnNwhy2G3BvtCJv+Vhb+KZ0nNLB27z3Bl0LGP6LJdMRNAxFBJMv4k3aR
F3sABugwCpnT2/YtuprxRl2/3/CyLur5NjY24FD+ugON3JIWfl6ETbHeFmxr1JE4
mE+zaN5AwYuSuH9LpdRy85XVCcW/FFqP/DwOFllVvCCCNvvS0KWYSNHWfEsKdR75
hmAAaS/rpi2eaL0vp88sNhAtYnhMSf+uFu0fyfYeWZuJqMt4Xz5xZKAzDsifCdif
aQ6UEPDjiKABh9gpX26BMd2CXzkGR+L4qZ7iBPfO586Iy7opajrFX9kIj5U7ZtCl
wsPat/9+18xpVJOTe0sss3idId7Ft4cRoW5FQMEAW2EWJ9fXAG1yDxEREj1V5gFx
sMXtpmCoQag968qjfARvP08s3MB1P4Ij6tXcioGqHuEWeJLxOMK/KWyafQUg611d
0kSWNO0OMo+odBj6j/vM+MIIaPhgwtZnPgw2q4uHGMcemzQxaEvGW+G/5a5qEpTv
SKm8W24wXplNot4tuTGWq5/jANRJcMvVsyC48DYT81OZEOWrIc0kDV4v4qZToTxW
97jn1NKa2H6L0J1V
=Za8V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
The ccache tool can be used to speed up cross-compilation, by calling the
compiler and binutils through ccache. For example, following should work:
$ export ARCH=arm64 CROSS_COMPILE="ccache aarch64-linux-gnu-"
$ make M=drivers/gpu/drm/rockchip/
but pahole fails to extract the BTF info from DWARF, breaking the build:
CC [M] drivers/gpu/drm/rockchip//rockchipdrm.mod.o
LD [M] drivers/gpu/drm/rockchip//rockchipdrm.ko
BTF [M] drivers/gpu/drm/rockchip//rockchipdrm.ko
aarch64-linux-gnu-objcopy: invalid option -- 'J'
Usage: aarch64-linux-gnu-objcopy [option(s)] in-file [out-file]
Copies a binary file, possibly transforming it in the process
...
make[1]: *** [scripts/Makefile.modpost:156: __modpost] Error 2
make: *** [Makefile:1866: modules] Error 2
this fails because OBJCOPY is set to "ccache aarch64-linux-gnu-copy" and
later pahole is executed with the following command line:
LLVM_OBJCOPY=$(OBJCOPY) $(PAHOLE) -J --btf_base vmlinux $@
which gets expanded to:
LLVM_OBJCOPY=ccache aarch64-linux-gnu-objcopy pahole -J ...
instead of:
LLVM_OBJCOPY="ccache aarch64-linux-gnu-objcopy" pahole -J ...
Fixes: 5f9ae91f7c ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20210526215228.3729875-1-javierm@redhat.com
I do not see a good reason why only the libelf development package must
be so carefully checked.
Kbuild generally does not check host tools or libraries.
For example, x86_64 defconfig fails to build with no libssl development
package installed.
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
| ^~~~~~~~~~~~~~~
To solve the build error, you need to install libssl-dev or openssl-devel
package, depending on your distribution.
'apt-file search', 'dnf provides', etc. is your frined to find a proper
package to install.
This commit removes all the libelf checks from the top Makefile.
If libelf is missing, objtool will fail to build in a similar pattern:
.../linux/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
10 | #include <gelf.h>
You need to install libelf-dev, libelf-devel, or elfutils-libelf-devel
to proceed.
Another remarkable change is, CONFIG_STACK_VALIDATION (without
CONFIG_UNWINDER_ORC) previously continued to build with a warning,
but now it will treat missing libelf as an error.
This is just a one-time installation, so it should not hurt to break
a build and make a user install the package.
BTW, the traditional way to handle such checks is autotool, but according
to [1], I do not expect the kernel build would have similar scripting
like './configure' does.
[1]: https://lore.kernel.org/lkml/CA+55aFzr2HTZVOuzpHYDwmtRJLsVzE-yqg2DHpHi_9ePsYp5ug@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
This change adds support for Clang’s forward-edge Control Flow
Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler
injects a runtime check before each indirect function call to ensure
the target is a valid function with the correct static type. This
restricts possible call targets and makes it more difficult for
an attacker to exploit bugs that allow the modification of stored
function pointers. For more details, see:
https://clang.llvm.org/docs/ControlFlowIntegrity.html
Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain
visibility to possible call targets. Kernel modules are supported
with Clang’s cross-DSO CFI mode, which allows checking between
independently compiled components.
With CFI enabled, the compiler injects a __cfi_check() function into
the kernel and each module for validating local call targets. For
cross-module calls that cannot be validated locally, the compiler
calls the global __cfi_slowpath_diag() function, which determines
the target module and calls the correct __cfi_check() function. This
patch includes a slowpath implementation that uses __module_address()
to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a
shadow map that speeds up module look-ups by ~3x.
Clang implements indirect call checking using jump tables and
offers two methods of generating them. With canonical jump tables,
the compiler renames each address-taken function to <function>.cfi
and points the original symbol to a jump table entry, which passes
__cfi_check() validation. This isn’t compatible with stand-alone
assembly code, which the compiler doesn’t instrument, and would
result in indirect calls to assembly code to fail. Therefore, we
default to using non-canonical jump tables instead, where the compiler
generates a local jump table entry <function>.cfi_jt for each
address-taken function, and replaces all references to the function
with the address of the jump table entry.
Note that because non-canonical jump table addresses are local
to each component, they break cross-module function address
equality. Specifically, the address of a global function will be
different in each module, as it's replaced with the address of a local
jump table entry. If this address is passed to a different module,
it won’t match the address of the same function taken there. This
may break code that relies on comparing addresses passed from other
components.
CFI checking can be disabled in a function with the __nocfi attribute.
Additionally, CFI can be disabled for an entire compilation unit by
filtering out CC_FLAGS_CFI.
By default, CFI failures result in a kernel panic to stop a potential
exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the
kernel prints out a rate-limited warning instead, and allows execution
to continue. This option is helpful for locating type mismatches, but
should only be enabled during development.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com
With LTO, LLVM bitcode won't be compiled into native code until
modpost_link, or modfinal for modules. This change postpones calls
to objtool until after these steps, and moves objtool_args to
Makefile.lib, so the arguments can be reused in Makefile.modfinal.
As we didn't have objects to process earlier, we use --duplicate
when processing vmlinux.o. This change also disables unreachable
instruction warnings with LTO to avoid warnings about the int3
padding between functions.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
This change adds build system support for Clang's Link Time
Optimization (LTO). With -flto, instead of ELF object files, Clang
produces LLVM bitcode, which is compiled into native code at link
time, allowing the final binary to be optimized globally. For more
details, see:
https://llvm.org/docs/LinkTimeOptimization.html
The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
which defaults to LTO being disabled. To use LTO, the architecture
must select ARCH_SUPPORTS_LTO_CLANG and support:
- compiling with Clang,
- compiling all assembly code with Clang's integrated assembler,
- and linking with LLD.
While using CONFIG_LTO_CLANG_FULL results in the best runtime
performance, the compilation is not scalable in time or
memory. CONFIG_LTO_CLANG_THIN enables ThinLTO, which allows
parallel optimization and faster incremental builds. ThinLTO is
used by default if the architecture also selects
ARCH_SUPPORTS_LTO_CLANG_THIN:
https://clang.llvm.org/docs/ThinLTO.html
To enable LTO, LLVM tools must be used to handle bitcode files, by
passing LLVM=1 and LLVM_IAS=1 options to make:
$ make LLVM=1 LLVM_IAS=1 defconfig
$ scripts/config -e LTO_CLANG_THIN
$ make LLVM=1 LLVM_IAS=1
To prepare for LTO support with other compilers, common parts are
gated behind the CONFIG_LTO option, and LTO can be disabled for
specific files by filtering out CC_FLAGS_LTO.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-3-samitolvanen@google.com
In some modes of operation, Kbuild allows to build modules without having
vmlinux image around. In such case, generation of module BTF is impossible.
This patch changes the behavior to emit a warning about impossibility of
generating kernel module BTF, instead of breaking the build. This is especially
important for out-of-tree external module builds.
In vmlinux-less mode:
$ make clean
$ make modules_prepare
$ touch drivers/acpi/button.c
$ make M=drivers/acpi
...
CC [M] drivers/acpi/button.o
MODPOST drivers/acpi/Module.symvers
LD [M] drivers/acpi/button.ko
BTF [M] drivers/acpi/button.ko
Skipping BTF generation for drivers/acpi/button.ko due to unavailability of vmlinux
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
... empty ...
Now with normal build:
$ make all
...
LD [M] drivers/acpi/button.ko
BTF [M] drivers/acpi/button.ko
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
[60] .BTF PROGBITS 0000000000000000 00029310
000000000000ab3f 0000000000000000 0 0 1
Fixes: 5f9ae91f7c ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/bpf/20201121070829.2612884-1-andrii@kernel.org
Detect if pahole supports split BTF generation, and generate BTF for each
selected kernel module, if it does. This is exposed to Makefiles and C code as
CONFIG_DEBUG_INFO_BTF_MODULES flag.
Kernel module BTF has to be re-generated if either vmlinux's BTF changes or
module's .ko changes. To achieve that, I needed a helper similar to
if_changed, but that would allow to filter out vmlinux from the list of
updated dependencies for .ko building. I've put it next to the only place that
uses and needs it, but it might be a better idea to just add it along the
other if_changed variants into scripts/Kbuild.include.
Each kernel module's BTF deduplication is pretty fast, as it does only
incremental BTF deduplication on top of already deduplicated vmlinux BTF. To
show the added build time, I've first ran make only just built kernel (to
establish the baseline) and then forced only BTF re-generation, without
regenerating .ko files. The build was performed with -j60 parallelization on
56-core machine. The final time also includes bzImage building, so it's not
a pure BTF overhead.
$ time make -j60
...
make -j60 27.65s user 10.96s system 782% cpu 4.933 total
$ touch ~/linux-build/default/vmlinux && time make -j60
...
make -j60 123.69s user 27.85s system 1566% cpu 9.675 total
So 4.6 seconds real time, with noticeable part spent in compressed vmlinux and
bzImage building.
To show size savings, I've built my kernel configuration with about 700 kernel
modules with full BTF per each kernel module (without deduplicating against
vmlinux) and with split BTF against deduplicated vmlinux (approach in this
patch). Below are top 10 modules with biggest BTF sizes. And total size of BTF
data across all kernel modules.
It shows that split BTF "compresses" 115MB down to 5MB total. And the biggest
kernel modules get a downsize from 500-570KB down to 200-300KB.
FULL BTF
========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
115710691
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 570570
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 520240
./drivers/gpu/drm/radeon/radeon.ko 503849
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 491777
./fs/xfs/xfs.ko 411544
./drivers/net/ethernet/intel/i40e/i40e.ko 403904
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 398754
./drivers/infiniband/core/ib_core.ko 397224
./fs/cifs/cifs.ko 386249
./fs/nfsd/nfsd.ko 379738
SPLIT BTF
=========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
5194047
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 293206
./drivers/gpu/drm/radeon/radeon.ko 282103
./fs/xfs/xfs.ko 222150
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 198503
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 198356
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 113444
./fs/cifs/cifs.ko 109379
./arch/x86/kvm/kvm.ko 100225
./drivers/gpu/drm/drm.ko 94827
./drivers/infiniband/core/ib_core.ko 91188
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-4-andrii@kernel.org
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)
The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.
You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.
scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.
You can add arch-specific sections in <asm/module.lds.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Makefile.lib is included by Makefile.modfinal as well as Makefile.build.
Move modkern_cflags to Makefile.lib in order to simplify cmd_cc_o_c
in Makefile.modfinal. Move modkern_cflags as well for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I think splitting the modpost and linking modules into separate
Makefiles will be useful especially when more complex build steps
come in. The main motivation of this commit is to integrate the
proposed klp-convert feature cleanly.
I moved the logging 'Building modules, stage 2.' to Makefile.modpost
to avoid the code duplication although I do not know whether or not
this message is needed in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Jiri Olsa
Sami Tolvanen
Linus Torvalds
Javier Martinez Canillas
Masahiro Yamada
Andrii Nakryiko
Masahiro Yamada