Граф коммитов

10 Коммитов

Автор SHA1 Сообщение Дата
Mauro Carvalho Chehab 5c57ae64e8 media: i2c/Kconfig: use sub-menus for I2C support
There are *lots* of I2C ancillary drivers. While we're using
comments to group them, all options appear at the same menu.

It should be a lot clearer to group them into sub-menus, with
may help people to go directly to the driver(s) he's needing
to enable.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-16 10:34:40 +02:00
Mauro Carvalho Chehab 32a363d0b0 media: Kconfig files: use select for V4L2 subdevs and MC
There are lots of drivers that only work when the media controller
and/or the V4L2 subdev APIs are present.

Right now, someone need to first enable those APIs before
using those drivers.

Well, ideally, drivers, should, instead *optionally*
depend on it, in order for PC camera drivers to be able to use
them, but nowadays most drivers are UVC cameras, with don't
require a sensor driver.

So, be it.

Let's instead make them select the MEDIA_CONTROLLER and the
SUBDEV API, in order to make easier for people to be able
of enabling them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14 10:29:05 +02:00
Ezequiel Garcia 4fa4ef39e1 media: Clarify how menus are hidden by SUBDRV_AUTOSELECT
Some users have been having a hard time finding the hidden
menus. A typically case are camera sensor drivers
(e.g IMX219, OV5645, etc), which are common on embedded
platforms and not really "ancillary" devices.

The problem with MEDIA_SUBDRV_AUTOSELECT seems to be related
to the fact that it uses the "visible" syntax to hide
the menus.

This is not obvious and it normally takes some time to
figure out.

To fix the problem, add a comment on each of hidden menus,
which should clarify what option is causing menus to be hidden.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-19 12:00:29 -03:00
Mauro Carvalho Chehab 1e0566fd4a Linux 5.2-rc2
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlzrJgUeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1XAIAJajJpeKc9MVQipi
 zWiI+WgHDg8gG/HnLKzP2Zp4MUjTCz30t0rnBbdo6AyK6LnPBL53yxg9q64XN7vI
 p/h2ys+/DvqhIYSPWX6C++HYQT4Cb5ghxJABEIsztd3G4nfB9L2vgq9zKSNFusTD
 UtfUxufciZPX515TuE4IqWMwS4Ut5daH7V3jjZunhPiayTFv64e1KbpKLLzHR0NR
 DfFbrPcdp7VyCT/A5AKrqfqeB6O9dm/Fe4CsdsaKuzASCXJ6GUc/A7iZDndv/KA4
 f5Xh7SGlQ2TfT1ud/aMfdw3AcMjqB8zgMJenovJ7UuHDfULBWNeAmMh/cTDwY9eY
 Xgyvfm0=
 =S8p9
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc2' into patchwork

Merge back from upstream into media tree, as there are some
patches merged upstream that has pontential of causing
conflicts (one actually rised a conflict already).

Linux 5.2-rc2

* tag 'v5.2-rc2': (377 commits)
  Linux 5.2-rc2
  random: fix soft lockup when trying to read from an uninitialized blocking pool
  tracing: Silence GCC 9 array bounds warning
  ext4: fix dcache lookup of !casefolded directories
  locking/lock_events: Use this_cpu_add() when necessary
  KVM: x86: fix return value for reserved EFER
  tools/kvm_stat: fix fields filter for child events
  KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
  kvm: selftests: aarch64: compile with warnings on
  kvm: selftests: aarch64: fix default vm mode
  kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
  KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
  KVM: x86/pmu: do not mask the value that is written to fixed PMUs
  KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
  x86/kvm/pmu: Set AMD's virt PMU version to 1
  KVM: x86: do not spam dmesg with VMCS/VMCB dumps
  kvm: Check irqchip mode before assign irqfd
  kvm: svm/avic: fix off-by-one in checking host APIC ID
  KVM: selftests: do not blindly clobber registers in guest asm
  KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
  ...
2019-05-28 11:21:51 -04:00
Stefan Agner 8169cf0a02 media: Kconfig: allow to select drivers if EMBEDDED
Embedded systems often connect to sensors or other multimedia
subdevices directly. Currently, to be able to select such a
subdevice (e.g. CONFIG_VIDEO_OV5640) disabling of the auto-
select config option is needed (CONFIG_MEDIA_SUBDRV_AUTOSELECT).

This is inconvenient as the ancillary drivers for a particular
device then need to be selected manually.

Allow to select drivers manually while keeping the auto-select
feature in case EXPERT (selected by EMBEDDED) is enabled.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-23 10:52:35 -04:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Mauro Carvalho Chehab b60a5b8dcf media: Kconfig files: use the right help coding style
Checkpatch wants to use 'help' instead of '---help---':

	WARNING: prefer 'help' over '---help---' for new help texts

Let's change it globally at the media subsystem, as otherwise people
would keep using the old way.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-20 06:47:51 -04:00
Yasunari Takiguchi 9dbaad428d media: cxd2880: Add all Makefile, Kconfig files and Update MAINTAINERS file for the driver
This is the Makefile, Kconfig files of driver
and MAINTAINERS file update about the driver
for the Sony CXD2880 DVB-T2/T tuner + demodulator.

Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-07 05:02:57 -05:00
Hans Verkuil 8283a09299 [media] media Kconfig: improve the spi integration
The SPI driver looked a bit lonely in the config menu, and it didn't
support the autoselect. Shift things around a bit so it looks more logical.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 14:37:05 -03:00
Charles-Antoine Couret 7aae6e2df1 [media] Add GS1662 driver, a video serializer
You can read datasheet here:
http://www.c-dis.net/media/871/GS1662_Datasheet.pdf

It's a component which supports HD and SD CEA or SDI formats
to SDI output. It's configured through SPI bus.

GS1662 driver is implemented as v4l2 subdev.

Signed-off-by: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 14:36:24 -03:00