Commit aa47a7c215 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel. Seven are cc:stable and eight address post-6.3 issues or were
judged unsuitable for -stable backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZAO0bAAKCRDdBJ7gKXxA
jo73AP0Sbgd+E0u5Hs+aACHW28FpxleVRdyexc5chXD5QsyLKgEAwjntE7jfHHYK
GkUKsoWQJblgjm3ksRxdLbVkDSQ8sQE=
=CQ0B
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes.
Eight are for MM and seven are for other parts of the kernel. Seven
are cc:stable and eight address post-6.3 issues or were judged
unsuitable for -stable backporting"
* tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: map Dikshita Agarwal's old address to his current one
mailmap: map Vikash Garodia's old address to his current one
fs/cramfs/inode.c: initialize file_ra_state
fs: hfsplus: fix UAF issue in hfsplus_put_super
panic: fix the panic_print NMI backtrace setting
lib: parser: update documentation for match_NUMBER functions
kasan, x86: don't rename memintrinsics in uninstrumented files
kasan: test: fix test for new meminstrinsic instrumentation
kasan: treat meminstrinsic as builtins in uninstrumented files
kasan: emit different calls for instrumentable memintrinsics
ocfs2: fix non-auto defrag path not working issue
ocfs2: fix defrag path triggering jbd2 ASSERT
mailmap: map Georgi Djakov's old Linaro address to his current one
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH
mm/damon/paddr: fix missing folio_put()
mm/mremap: fix dup_anon_vma() in vma_merge() case 4
commit 67222c4ba8 ("lib: parser: optimize match_NUMBER apis to use local
array") removed -ENOMEM as a possible return value, so update the comments
accordingly.
Link: https://lkml.kernel.org/r/20230224042618.9092-1-ebiggers@kernel.org
Fixes: 67222c4ba8 ("lib: parser: optimize match_NUMBER apis to use local array")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Li Lingfeng <lilingfeng3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DFLTCC deflate with Z_NO_FLUSH might generate a corrupted stream when the
output buffer is not large enough to fit all the deflate output at once.
The problem takes place on closing the deflate block since flush_pending()
might leave some output bits not written. Similar problem for software
deflate with Z_BLOCK flush option (not supported by kernel zlib deflate)
has been fixed a while ago in userspace zlib but the fix never got to the
kernel.
Now flush_pending() flushes the bit buffer before copying out the byte
buffer, in order to really flush as much as possible.
Currently there are no users of DFLTCC deflate with Z_NO_FLUSH option in
the kernel so the problem remained hidden for a while.
This commit is based on the old zlib commit:
https://github.com/madler/zlib/commit/0b828b4
Link: https://lkml.kernel.org/r/20230221131617.3369978-2-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KUnit's 'hooks.o' file need to be built-in whenever KUnit is enabled
(even if CONFIG_KUNIT=m). We'd previously attemtped to do this by
adding 'kunit/hooks.o' to obj-y in lib/Makefile, but this caused hooks.c
to be rebuilt even when it was unchanged.
Instead, always recurse into lib/kunit using obj-y when KUnit is
enabled, and add the hooks there.
Fixes: 7170b7ed6a ("kunit: Add "hooks" to call into KUnit when it's built as a module").
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-kselftest/CAHk-=wiEf7irTKwPJ0jTMOF3CS-13UXmF6Fns3wuWpOZ_wGyZQ@mail.gmail.com/
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Most notable is a set of zlib changes from Mikhail Zaslonko which enhances
and fixes zlib's use of S390 hardware support: "lib/zlib: Set of s390
DFLTCC related patches for kernel zlib".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/QC4QAKCRDdBJ7gKXxA
jtKdAQCbDCBdY8H45d1fONzQW2UDqCPnOi77MpVUxGL33r+1SAEA807C7rvDEmlf
yP1Ft+722fFU5jogVU8ZFh+vapv2/gI=
=Q9YK
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
Nothing exciting at all for modules for v6.3. The biggest change is
just the change of INSTALL_MOD_DIR from "extra" to "updates" which
I found lingered for ages for no good reason while testing the CXL
mock driver [0]. The CXL mock driver has no kconfig integration and requires
building an external module... and re-building the *rest* of the production
drivers. This mock driver when loaded but not the production ones will
crash. All this crap can obviously be fixed by integrating kconfig
semantics into such test module, however that's not desirable by
the maintainer, and so sensible defaults must be used to ensure a
default "make modules_install" will suffice for most distros which
do not have a file like /etc/depmod.d/dist.conf with something like
`search updates extra built-in`. Since most distros rely on kmod and
since its inception the "updates" directory is always in the search
path it makes more sense to use that than the "extra" which only
*some* RH based systems rely on. All this stuff has been on linux-next
for a while.
For v6.4 I already have queued some initial work by Song Liu which gets
us slowly going to a place where we *may* see a generic allocator for
huge pages for module text to avoid direct map fragmentation *and*
reduce iTLB pressure. That work is in its initial stages, no allocator
work is done yet. This is all just prep work. Fortunately Thomas Gleixner
has helped convince Song that modules *need* to be *requirement* if we
are going to see any special allocator touch x86. So who knows... maybe
around v6.5 we'll start seeing some *real* performance numbers of the
effect of using huge pages for something other than eBPF toys.
For v6.4 also, you may start seeing patches from Nick Alcock on different
trees and modules-next which aims at extending kallsyms *eventually* to provide
clearer address to symbol lookups. The claim is that this is a *great* *feature*
tracing tools are dying to have so they can for instance disambiguate symbols as
coming from modules or from other parts of the kernel. I'm still waiting to see
proper too usage of such stuff, but *how* we lay this out is still being ironed
out. Part of the initial work I've been pushing for is to help upkeep our
modules build optimizations, so being mindful about the work by Masahiro Yamada
on commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf") which helps avoid traversing the build
tree twice. After this commit we now rely on the MODULE_LICENSE() tag to
determine in a *faster* way if something being built could be a module and
we dump this into the modules.builtin so that modprobe can simply succeed
if a module is known to already be built-in. The cleanup work on MODULE_LICENSE()
simply stems to assist false positives from userspace for things as built-in
when they *cannot ever* be modules as we don't even tristate the code as
modular. This work also helps with the SPDX effort as some code is not clearly
identified with a tag. In the *future*, once all *possible* modules are
confirmed to have a respective SPDX tag, we *may* just be able to replace the
MODULE_LICENSE() to instead be generated automatically through inference of
the respective module SPDX tags.
[0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=aeTV
-----END PGP SIGNATURE-----
Merge tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Nothing exciting at all for modules for v6.3.
The biggest change is just the change of INSTALL_MOD_DIR from "extra"
to "updates" which I found lingered for ages for no good reason while
testing the CXL mock driver [0].
The CXL mock driver has no kconfig integration and requires building
an external module... and re-building the *rest* of the production
drivers. This mock driver when loaded but not the production ones will
crash.
All this can obviously be fixed by integrating kconfig semantics into
such test module, however that's not desirable by the maintainer, and
so sensible defaults must be used to ensure a default "make
modules_install" will suffice for most distros which do not have a
file like /etc/depmod.d/dist.conf with something like `search updates
extra built-in`.
Since most distros rely on kmod and since its inception the "updates"
directory is always in the search path it makes more sense to use that
than the "extra" which only *some* RH based systems rely on.
All this stuff has been on linux-next for a while"
[0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org
* tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
Documentation: livepatch: module-elf-format: Remove local klp_modinfo definition
module.h: Document klp_modinfo struct using kdoc
module: Use kstrtobool() instead of strtobool()
kernel/params.c: Use kstrtobool() instead of strtobool()
test_kmod: stop kernel-doc warnings
kbuild: Modify default INSTALL_MOD_DIR from extra to updates
-----BEGIN PGP SIGNATURE-----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=cVoE
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Refactor printk code for formatting messages that are shown on
consoles. This is a preparatory step for introducing atomic consoles
which could not share the global buffers
- Prevent memory leak when removing printk index in debugfs
- Dump also the newest printk message by the sample gdbmacro
- Fix a compiler warning
* tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printf: fix errname.c list
kernel/printk/index.c: fix memory leak with using debugfs_lookup()
printk: Use scnprintf() to print the message about the dropped messages on a console
printk: adjust string limit macros
printk: use printk_buffers for devkmsg
printk: introduce console_prepend_dropped() for dropped messages
printk: introduce printk_get_next_message() and printk_message
printk: introduce struct printk_buffers
console: Document struct console
console: Use BIT() macros for @flags values
printk: move size limit macros into internal.h
docs: gdbmacros: print newest record
- Skip negative return code check for snprintf in eprobe.
- Add recursive call test cases for kprobe unit test
- Add 'char' type to probe events to show it as the character instead of value.
- Update kselftest kprobe-event testcase to ignore '__pfx_' symbols.
- Fix kselftest to check filter on eprobe event correctly.
- Add filter on eprobe to the README file in tracefs.
- Fix optprobes to check whether there is 'under unoptimizing' optprobe when optimizing another kprobe correctly.
- Fix optprobe to check whether there is 'under unoptimizing' optprobe when fetching the original instruction correctly.
- Fix optprobe to free 'forcibly unoptimized' optprobe correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP0JdYACgkQ2/sHvwUr
Pxt6sQf/TD9Kwqx3XG1tnLPev6yt2nuggUippHwWUFHlJtMyUaLV8aKFqByyEe+j
tCQvrFIIJq242xg0Jac/MAf2exlWG9jsmVZPmvC1YzepOAbjXu2eBkIS7LsbeHjF
JJypNnEceffWCpNoD6nlvR0xWXenqRbZJwdsGqo3u+fXnzTurEMY2GU2xOyv39tv
S1uNLPANJxdMb/2iUsUE3hMbe82dqr8zPcApqWFtTBB6QPHI3B2SjuQHpQxwbTPl
bzAl0yQkLSQXprVzT7xJ4xLnzbl1ljgJBci5aX8BFF+VD9oYkypdfYVczBH5VsP9
E3eT9T9lRf4Q99EqxNy5uw7NqQXGQg==
=CMPb
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes updates from Masami Hiramatsu:
- Skip negative return code check for snprintf in eprobe
- Add recursive call test cases for kprobe unit test
- Add 'char' type to probe events to show it as the character instead
of value
- Update kselftest kprobe-event testcase to ignore '__pfx_' symbols
- Fix kselftest to check filter on eprobe event correctly
- Add filter on eprobe to the README file in tracefs
- Fix optprobes to check whether there is 'under unoptimizing' optprobe
when optimizing another kprobe correctly
- Fix optprobe to check whether there is 'under unoptimizing' optprobe
when fetching the original instruction correctly
- Fix optprobe to free 'forcibly unoptimized' optprobe correctly
* tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: no need to check for negative ret value for snprintf
test_kprobes: Add recursed kprobe test case
tracing/probe: add a char type to show the character value of traced arguments
selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols
selftests/ftrace: Fix eprobe syntax test case to check filter support
tracing/eprobe: Fix to add filter on eprobe description in README file
x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
This KUnit update for Linux 6.3-rc1 consists of cleanups, new features,
and documentation updates:
-- adds Function Redirection API to isolate the code being tested from
other parts of the kernel. functionredirection.rst has the details.
-----BEGIN PGP SIGNATURE-----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=PloE
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
- add Function Redirection API to isolate the code being tested from
other parts of the kernel.
Documentation/dev-tools/kunit/api/functionredirection.rst has the
details.
* tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Add printf attribute to fail_current_test_impl
lib/hashtable_test.c: add test for the hashtable structure
Documentation: Add Function Redirection API docs
kunit: Expose 'static stub' API to redirect functions
kunit: Add "hooks" to call into KUnit when it's built as a module
kunit: kunit.py extract handlers
tools/testing/kunit/kunit.py: remove redundant double check
Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs
on the one hand and failing hardware on the other.
-----BEGIN PGP SIGNATURE-----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=MPMw
-----END PGP SIGNATURE-----
Merge tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull x86 NMI diagnostics from Paul McKenney:
"Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs
on the one hand and failing hardware on the other"
* tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
x86/nmi: Print reasons why backtrace NMIs are ignored
x86/nmi: Accumulate NMI-progress evidence in exc_nmi()
-----BEGIN PGP SIGNATURE-----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=4hIT
-----END PGP SIGNATURE-----
Merge tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French:
"The largest subset of this is from David Howells et al: making the
cifs/smb3 driver pass iov_iters down to the lowest layers, directly to
the network transport rather than passing lists of pages around,
helping multiple areas:
- Pin user pages, thereby fixing the race between concurrent DIO read
and fork, where the pages containing the DIO read buffer may end up
belonging to the child process and not the parent - with the result
that the parent might not see the retrieved data.
- cifs shouldn't take refs on pages extracted from non-user-backed
iterators (eg. KVEC). With these changes, cifs will apply the
appropriate cleanup.
- Making it easier to transition to using folios in cifs rather than
pages by dealing with them through BVEC and XARRAY iterators.
- Allowing cifs to use the new splice function
The remainder are:
- fixes for stable, including various fixes for uninitialized memory,
wrong length field causing mount issue to very old servers,
important directory lease fixes and reconnect fixes
- cleanups (unused code removal, change one element array usage, and
a change form strtobool to kstrtobool, and Kconfig cleanups)
- SMBDIRECT (RDMA) fixes including iov_iter integration and UAF fixes
- reconnect fixes
- multichannel fixes, including improving channel allocation (to
least used channel)
- remove the last use of lock_page_killable by moving to
folio_lock_killable"
* tag '6.3-rc-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (46 commits)
update internal module version number for cifs.ko
cifs: update ip_addr for ses only for primary chan setup
cifs: use tcon allocation functions even for dummy tcon
cifs: use the least loaded channel for sending requests
cifs: DIO to/from KVEC-type iterators should now work
cifs: Remove unused code
cifs: Build the RDMA SGE list directly from an iterator
cifs: Change the I/O paths to use an iterator rather than a page list
cifs: Add a function to read into an iter from a socket
cifs: Add some helper functions
cifs: Add a function to Hash the contents of an iterator
cifs: Add a function to build an RDMA SGE list from an iterator
netfs: Add a function to extract an iterator into a scatterlist
netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator
cifs: Implement splice_read to pass down ITER_BVEC not ITER_PIPE
splice: Export filemap/direct_splice_read()
iov_iter: Add a function to extract a page list from an iterator
iov_iter: Define flags to qualify page extraction.
splice: Add a func to do a splice from an O_DIRECT file without ITER_PIPE
splice: Add a func to do a splice from a buffered file without ITER_PIPE
...
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
...and the usual set of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmPzkQUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YC0QH/09u10xV3N+RuveNE/tArVxKcQi7JZd/xugQ
toSXygh64WY10lzwi7Ms1bHZzpPYB0fOrqTGNqNQuhrVTjQzaZB0BBJqm8lwt2w/
S/Z5wj+IicJTmQ7+0C2Hc/dcK5SCPfY3CgwqOUVdr3dEm1oU+4QaBy31fuIJJ0Hx
NdbXBco8BZqJX9P67jwp9vbrFrSGBjPI0U4HNHVjrWlcBy8JT0aAnf0fyWFy3orA
T86EzmEw8drA1mXsHa5pmVwuHDx2X+D+eRurG9llCBrlIG9EDSmnalY4BeGqR4LS
oDrEH6M91I5+9iWoJ0rBheD8rPclXO2HpjXLApXzTjrORgEYZsM=
=MCdX
-----END PGP SIGNATURE-----
Merge tag 'docs-6.3' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
Building a kcsan enabled kernel for x86_64 with gcc-11 results in a lot
of build warnings or errors without CONFIG_CONSTRUCTORS:
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/copy_mc.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/cpu.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/csum-partial_64.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/csum-wrappers_64.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/insn-eval.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/insn.o'
x86_64-linux-ld: error: unplaced orphan section `.ctors.65436' from `arch/x86/lib/misc.o'
The same thing has been reported for mips64. I can't reproduce it for
any other compiler version, so I don't know if constructors are always
required here or if this is a gcc-11 specific implementation detail.
I see no harm in always enabling constructors here, and this reliably
fixes the build warnings for me.
Link: https://lore.kernel.org/lkml/202204181801.r3MMkwJv-lkp@intel.com/T/
Cc: Kees Cook <keescook@chromium.org>
See-also: 3e6631485f ("vmlinux.lds.h: Keep .ctors.* with .ctors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Replace 0-length and 1-element arrays with flexible arrays in various
subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer size
-----BEGIN PGP SIGNATURE-----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=XnVa
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code.
This also contains a first usecase in the block multi-queue code which
Jens asked to take along with the librarization.
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing.
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context.
- Move the IPI multiplexing code from the Apple AIC driver into the
core. so it can be reused by RISCV.
Drivers:
- Plug OF node refcounting leaks in various drivers.
- Correctly mark level triggered interrupts in the Broadcom L2 drivers.
- The usual small fixes and improvements.
- No new drivers for the record!
-----BEGIN PGP SIGNATURE-----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=+pu3
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Move the interrupt affinity spreading mechanism into lib/group_cpus
so it can be used for similar spreading requirements, e.g. in the
block multi-queue code
This also contains a first usecase in the block multi-queue code
which Jens asked to take along with the librarization
- Improve irqdomain locking to close a number race conditions which
can be observed with massive parallel device driver probing
- Enforce and document the semantics of disable_irq() which cannot be
invoked safely from non-sleepable context
- Move the IPI multiplexing code from the Apple AIC driver into the
core, so it can be reused by RISCV
Drivers:
- Plug OF node refcounting leaks in various drivers
- Correctly mark level triggered interrupts in the Broadcom L2
drivers
- The usual small fixes and improvements
- No new drivers for the record!"
* tag 'irq-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
irqdomain: Switch to per-domain locking
irqchip/mvebu-odmi: Use irq_domain_create_hierarchy()
irqchip/loongson-pch-msi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-mbi: Use irq_domain_create_hierarchy()
irqchip/gic-v3-its: Use irq_domain_create_hierarchy()
irqchip/gic-v2m: Use irq_domain_create_hierarchy()
irqchip/alpine-msi: Use irq_domain_add_hierarchy()
x86/uv: Use irq_domain_create_hierarchy()
x86/ioapic: Use irq_domain_create_hierarchy()
irqdomain: Clean up irq_domain_push/pop_irq()
irqdomain: Drop leftover brackets
irqdomain: Drop dead domain-name assignment
irqdomain: Drop revmap mutex
irqdomain: Fix domain registration race
irqdomain: Fix mapping-creation race
irqdomain: Refactor __irq_domain_alloc_irqs()
irqdomain: Look for existing mapping only once
irqdomain: Drop bogus fwspec-mapping error handling
...
- Improve the scalability of the CFS bandwidth unthrottling logic
with large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with
the generic scheduler code. Add __cpuidle methods as noinstr to
objtool's noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS,
to query previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period,
to improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- ... Misc other cleanups, fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=l1nN
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
Add a recursed kprobe test case to the KUnit test module for kprobes.
This will probe a function which is called from the pre_handler and
post_handler itself. If the kprobe is correctly implemented, the recursed
kprobe handlers will be skipped and the number of skipped kprobe will
be counted on kprobe::nmissed.
Link: https://lore.kernel.org/all/167414238758.2301956.258548940194352895.stgit@devnote3/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add a function, iov_iter_extract_pages(), to extract a list of pages from
an iterator. The pages may be returned with a pin added or nothing,
depending on the type of iterator.
Add a second function, iov_iter_extract_will_pin(), to determine how the
cleanup should be done.
There are two cases:
(1) ITER_IOVEC or ITER_UBUF iterator.
Extracted pages will have pins (FOLL_PIN) obtained on them so that a
concurrent fork() will forcibly copy the page so that DMA is done
to/from the parent's buffer and is unavailable to/unaffected by the
child process.
iov_iter_extract_will_pin() will return true for this case. The
caller should use something like unpin_user_page() to dispose of the
page.
(2) Any other sort of iterator.
No refs or pins are obtained on the page, the assumption is made that
the caller will manage page retention.
iov_iter_extract_will_pin() will return false. The pages don't need
additional disposal.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Define flags to qualify page extraction to pass into iov_iter_*_pages*()
rather than passing in FOLL_* flags.
For now only a flag to allow peer-to-peer DMA is supported.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: linux-fsdevel@vger.kernel.org
cc: linux-block@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Provide a function to do splice read from a buffered file, pulling the
folios out of the pagecache directly by calling filemap_get_pages() to do
any required reading and then pasting the returned folios into the pipe.
A helper function is provided to do the actual folio pasting and will
handle multipage folios by splicing as many of the relevant subpages as
will fit into the pipe.
The code is loosely based on filemap_read() and might belong in
mm/filemap.c with that as it needs to use filemap_get_pages().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=poRc
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
-----BEGIN PGP SIGNATURE-----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=+ImB
-----END PGP SIGNATURE-----
Merge tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux
Pull io_uring ITER_UBUF conversion from Jens Axboe:
"Since we now have ITER_UBUF available, switch to using it for single
ranges as it's more efficient than ITER_IOVEC for that"
* tag 'for-6.3/iter-ubuf-2023-02-16' of git://git.kernel.dk/linux:
block: use iter_ubuf for single range
iov_iter: move iter_ubuf check inside restore WARN
io_uring: use iter_ubuf for single range imports
io_uring: switch network send/recv to ITER_UBUF
iov: add import_ubuf()
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
-----BEGIN PGP SIGNATURE-----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=ONcj
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
Link: https://lore.kernel.org/r/20230218143452.3817627-1-maz@kernel.org
gcc-10 changed the way inlining works to be less aggressive, but older
versions run into an oversized stack frame warning whenever
CONFIG_KASAN_STACK is enabled, as that forces variables from inlined
callees to be non-overlapping:
lib/maple_tree.c: In function 'mas_wr_bnode':
lib/maple_tree.c:4320:1: error: the frame size of 1424 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Change the annotations on mas_store_b_node() and mas_commit_b_node()
to explicitly forbid inlining in this configuration, which is
the same behavior that newer versions already have.
Link: https://lkml.kernel.org/r/20230214103030.1051950-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move all interface- and usage-related documentation comments to
include/linux/stackdepot.h.
It makes sense to have them in the header where they are available to
the interface users.
[akpm@linux-foundation.org: grammar fix, per Alexander]
Link: https://lkml.kernel.org/r/fbfee41495b306dd8881f9b1c1b80999c885e82f.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clean up comments in include/linux/stackdepot.h and lib/stackdepot.c:
1. Rework the initialization comment in stackdepot.h.
2. Rework the header comment in stackdepot.c.
3. Various clean-ups for other comments.
Also adjust whitespaces for find_stack and depot_alloc_stack call sites.
No functional changes.
Link: https://lkml.kernel.org/r/5836231b7954355e2311fc9b5870f697ea8e1f7d.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Accesses to pool_index are protected by pool_lock everywhere except
in a sanity check in stack_depot_fetch. The read access there can race
with the write access in depot_alloc_stack.
Use WRITE/READ_ONCE() to annotate the racy accesses.
As the sanity check is only used to print a warning in case of a
violation of the stack depot interface usage, it does not make a lot
of sense to use proper synchronization.
[andreyknvl@google.com: s/pool_index/pool_index_cached/ in stack_depot_fetch()]
Link: https://lkml.kernel.org/r/95cf53f0da2c112aa2cc54456cbcd6975c3ff343.1676129911.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/359ac9c13cd0869c56740fb2029f505e41593830.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current implementation of the extra_bits interface is confusing:
passing extra_bits to __stack_depot_save makes it seem that the extra
bits are somehow stored in stack depot. In reality, they are only
embedded into a stack depot handle and are not used within stack depot.
Drop the extra_bits argument from __stack_depot_save and instead provide
a new stack_depot_set_extra_bits function (similar to the exsiting
stack_depot_get_extra_bits) that saves extra bits into a stack depot
handle.
Update the callers of __stack_depot_save to use the new interace.
This change also fixes a minor issue in the old code: __stack_depot_save
does not return NULL if saving stack trace fails and extra_bits is used.
Link: https://lkml.kernel.org/r/317123b5c05e2f82854fc55d8b285e0869d3cb77.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stack depot uses next_pool_inited to mark that either the next pool is
initialized or the limit on the number of pools is reached. However,
the flag name only reflects the former part of its purpose, which is
confusing.
Rename next_pool_inited to next_pool_required and invert its value.
Also annotate usages of next_pool_required with comments.
Link: https://lkml.kernel.org/r/484fd2695dff7a9bdc437a32f8a6ee228535aa02.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clean up the exisiting comments and add new ones to depot_init_pool and
depot_alloc_stack.
As a part of the clean-up, remove mentions of which variable is accessed
by smp_store_release and smp_load_acquire: it is clear as is from the
code.
Link: https://lkml.kernel.org/r/f80b02951364e6b40deda965b4003de0cd1a532d.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
depot_init_pool has two call sites:
1. In depot_alloc_stack with a potentially NULL prealloc.
2. In __stack_depot_save with a non-NULL prealloc.
At the same time depot_init_pool can only return false when prealloc is
NULL.
As the second call site makes sure that prealloc is not NULL, the WARN_ON
there can never trigger. Thus, drop the WARN_ON and also move the prealloc
check from depot_init_pool to its first call site.
Also change the return type of depot_init_pool to void as it now always
returns true.
Link: https://lkml.kernel.org/r/ce149f9bdcbc80a92549b54da67eafb27f846b7b.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change the "STACK_ALLOC_" prefix to "DEPOT_" for the constants that
define the number of bits in stack depot handles and the maximum number
of pools.
The old prefix is unclear and makes wonder about how these constants
are related to stack allocations. The new prefix is also shorter.
Also simplify the comment for DEPOT_POOL_ORDER.
No functional changes.
Link: https://lkml.kernel.org/r/84fcceb0acc261a356a0ad4bdfab9ff04bea2445.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use "pool" instead of "slab" for naming memory regions stack depot
uses to store stack traces. Using "slab" is confusing, as stack depot
pools have nothing to do with the slab allocator.
Also give better names to pool-related global variables: change
"depot_" prefix to "pool_" to point out that these variables are
related to stack depot pools.
Also rename the slabindex (poolindex) field in handle_parts to pool_index
to align its name with the pool_index global variable.
No functional changes.
Link: https://lkml.kernel.org/r/923c507edb350c3b6ef85860f36be489dfc0ad21.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Give more meaningful names to hash table-related constants and variables:
1. Rename STACK_HASH_SCALE to STACK_HASH_TABLE_SCALE to point out that it
is related to scaling the hash table.
2. Rename STACK_HASH_ORDER_MIN/MAX to STACK_BUCKET_NUMBER_ORDER_MIN/MAX
to point out that it is related to the number of hash table buckets.
3. Rename stack_hash_order to stack_bucket_number_order for the same
reason as #2.
No functional changes.
Link: https://lkml.kernel.org/r/f166dd6f3cb2378aea78600714393dd568c33ee9.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Group stack depot global variables by their purpose:
1. Hash table-related variables,
2. Slab-related variables,
and add comments.
Also clean up comments for hash table-related constants.
Link: https://lkml.kernel.org/r/5606a6c70659065a25bee59cd10e57fc60bb4110.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add comments to stack_depot_early_init and stack_depot_init to explain
certain parts of their implementation.
Also add a pr_info message to stack_depot_early_init similar to the one
in stack_depot_init.
Also move the scale variable in stack_depot_init to the scope where it
is being used.
Link: https://lkml.kernel.org/r/d17fbfbd4d73f38686c5e3d4824a6d62047213a1.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename stack_depot_disable to stack_depot_disabled to make its name look
similar to the names of other stack depot flags.
Also put stack_depot_disabled's definition together with the other flags.
Also rename is_stack_depot_disabled to disable_stack_depot: this name
looks more conventional for a function that processes a boot parameter.
No functional changes.
Link: https://lkml.kernel.org/r/d78a07d222e689926e5ead229e4a2e3d87dc9aa7.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename stack_depot_want_early_init to stack_depot_request_early_init.
The old name is confusing, as it hints at returning some kind of intention
of stack depot. The new name reflects that this function requests an
action from stack depot instead.
No functional changes.
[akpm@linux-foundation.org: update mm/kmemleak.c]
Link: https://lkml.kernel.org/r/359f31bf67429a06e630b4395816a967214ef753.1676063693.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds
Eric Biggers
Marco Elver
Mikhail Zaslonko
David Gow
Arnd Bergmann
Dave Hansen
Masami Hiramatsu (Google)
David Howells
Thomas Gleixner
David S. Miller
Andrey Konovalov