Граф коммитов

89 Коммитов

Автор SHA1 Сообщение Дата
Daniel Glöckner 4006e565e1 xtensa: remove s6000 variant and s6105 platform
The Stretch s6000 family support has been merged into mainline 5 years
ago. There appear to be no users of this code since nobody complained
that there is a merge error preventing compilation.

Apart from the s6105 IP camera reference design there are no s6000 devices
known to ever have run Linux and as the chips are out of production there
probably never will be. The successor s7000 no longer uses an Xtensa core
for the OS.

Let's remove the code until someone is found who actually needs it.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21 13:29:01 +04:00
Max Filippov 3932b9ca55 xtensa: make PLATFORM_DEFAULT_MEM parameters configurable
This allows using xtfpga platform with both MMU and noMMU cores.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-10-21 13:28:59 +04:00
Max Filippov 55b441be5c xtensa: ISS: don't depend on CONFIG_TTY
Build console support only when CONFIG_TTY is selected.
This restores ISS as the default platform for allnoconfig builds.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-05-05 09:04:10 -07:00
Max Filippov cfe8255f0a xtensa: xt2000: drop redundant sysmem initialization
sysmem structure initialization in xt2000 platform_init is identical to
the one done in init_arch just before the call to platform_init.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-04-10 00:19:03 -07:00
Max Filippov 2bc2fde638 xtensa: xtfpga: set ethoc clock frequency
Connect xtfpga board ethernet MAC to the clock in the DTS. Set up MAC
base frequency in the platform data in case of build w/o CONFIG_OF.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21 21:33:44 +04:00
Max Filippov cdc9af7ccf xtensa: xtfpga: use common clock framework
With this change the board needs to set up single clock object, users of
this clock will get correct frequency automatically.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-02-21 21:33:43 +04:00
Linus Torvalds f568849eda Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...
2014-01-30 11:19:05 -08:00
Jens Axboe 675675ada4 xtensa: fixup simdisk driver to work with immutable bio_vecs
Geert reported:

arch/xtensa/platforms/iss/simdisk.c:108:23: error: 'struct bio' has no member named 'bi_sector'
arch/xtensa/platforms/iss/simdisk.c:110:2: error: incompatible types when assigning to type 'int' from type 'struct bvec_iter'
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:110:2: error: request for member 'bv_len' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_size' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_idx' in something not a structure or union
arch/xtensa/platforms/iss/simdisk.c:111:18: error: request for member 'bi_bvec_done' in something not a structure or union
make[2]: *** [arch/xtensa/platforms/iss/simdisk.o] Error 1

Fixup the usage of bio_for_each_segment(). Also fix wrong use
of __bio_kunmap_atomic() - it needs the mapped buffer passed in,
not the originally mapped page.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2014-01-29 08:37:32 -07:00
Max Filippov a558d99263 xtensa: xtfpga: fix definitions of platform devices
Remove __initdata attribute, as the devices may be used after init
sections are freed.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15 00:21:25 +04:00
Baruch Siach 42beb7628e xtensa: standardize devicetree cpu compatible strings
The recommended compatible string format, according to the ePAPR v1.1 standard,
is "manufacturer,model". Change the xtensa cpu compatible strings to
"cdns,xtensa-cpu". Also, change the boards compatible strings in a similar way.

The pic compatible string will be dealt with in a separate patch.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-15 00:21:25 +04:00
Max Filippov 306ab5448f xtensa: ISS: raise network polling rate to 10 times/sec
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2014-01-14 23:57:03 +04:00
Max Filippov 8be54d770b xtensa: ISS: avoid simple_strtoul usage
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:20:00 -08:00
Max Filippov f615136c06 xtensa: add SMP support
This is largely based on SMP code from the xtensa-2.6.29-smp tree by
Piet Delaney, Marc Gauthier, Joe Taylor, Christian Zankel (and possibly
other Tensilica folks).

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:58 -08:00
Max Filippov c4ee0af3fa xtensa: remove NO_IRQ definitions
These definitions (-1) were correct when used as a hardware IRQ number,
but are incorrect as a mapped IRQ number.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:52 -08:00
Max Filippov a6e16b9aaf xtensa: ISS: clean up diagnostic, increase verbosity
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:51 -08:00
Max Filippov 35e14b443a xtensa: ISS: always use fixed tuntap config
The code doesn't handle dynamic TAP interface allocation, so there's no
point tracking this case.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:51 -08:00
Max Filippov f6ac5a177d xtensa: ISS: enable iss_net_set_mac
This allows changing MAC address of the device.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:50 -08:00
Max Filippov 8991fd8835 xtensa: ISS: drop IP setup, clean up MAC setup
Without proper MAC setup network device doesn't work. IP setup is
redundant and may be done with 'ip=...' kernel parameter.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:50 -08:00
Max Filippov 358b181003 xtensa: ISS: init network interface name before the probe
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:49 -08:00
Max Filippov 8c8ad85f1f xtensa: ISS: fix command line parameter name
Now 'ethX=...' syntax can actually be used in kernel command line to
specify network interfaces.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:49 -08:00
Max Filippov 3f3cd60bbd xtensa: ISS: clean up iss-network driver
No functional changes, remove dead/unused code, clean checkpatch warnings,
replace strlen of constant strings with sizeof.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2014-01-14 10:19:48 -08:00
Thomas Meyer f447fd30af xtensa: Cocci spatch "noderef"
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-10-16 11:48:31 -07:00
Zhao Hongjiang 0eb5afb3ba xtensa: remove the second argument of __bio_kmap_atomic()
kmap_atomic allows only one argument now, just remove the unused 'kmtype'.

Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08 01:23:15 -07:00
Baruch Siach e504c4b607 xtensa: cleanup ccount frequency tracking
Remove unused nsec_per_ccount, and rename ccount_per_jiffy to ccount_preq.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-07-08 01:11:37 -07:00
Max Filippov dc2bffa77a xtensa: ISS: fix section mismatch in iss_net_setup
iss_net_setup is only called from __setup, so it should be marked
__init.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-06-05 10:14:21 -07:00
Baruch Siach 54c0af9f1a xtensa: xtfpga: fix section mismatch
platform_calibrate_ccount() calls update_clock_frequency() which is in .init
section. However, platform_calibrate_ccount() itself is only called from .init
(i.e., time_init()).

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-06-05 10:14:20 -07:00
Linus Torvalds c61c48dfe0 Xtensa patchset for v3.10-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRi1p8AAoJEI9vqH3mFV2scb0QAJbq32y6YFWz2VGfxf5RQIWC
 QueuQ4vyDKzuGbQQQ1EvJ6WckLnp9Yu4rlVXBiYMFymWvLEM+8BPLK5ywbsMLaLm
 lDpWs2cUi6hRuEa2dYwsp260mlwAz+DvvUi+TnFN4PIarIAI+CaFevhlWtbayvg/
 TZh9vthBA2qdK8N97WbKgE4eBJgAOLdMybQPtibd9yNiYAD8r2xRqNRoy4dklliV
 Grm1G3BkDFRl+espfbNBAWd+dpxTe8Sw0N9uRf2I1G6pgx0u9i5oOEo78Ur078nc
 E6yauJlQJiogHrsEKCfX5WLWlLEgvsZx4Az4If2i///PSai4/wEDqTUZ2L390/r/
 0ui6YKr1JSVlZLYs4X893Mu+tJYJd8+fiCWXBJY5GqWg9FHzE6RHUBifkHD2DoUm
 UWjGCWtsMrcAy25rPqrVrIOlRdONVuxzp3xW7T9PkZ87r8v/RRJa4VWyWKerNPif
 Qbi/sUXD76mAOY4BisHWeOLpa9us2SOiJLqkDNB22/sH5Qdfh/pso9/BAQom+ESD
 Rfl4rgw99rzVoKiGSf3HbhRPJzghxkCwytpoh2GwvzNp+vZWqWw7AAo5uVbQP0zb
 Fg0ZtHSotCz76dp4vZn042yflPevvPc3N3O2ayC529ZB4eh+3kWfCpzHYWaEmD8e
 HV2+rc0QcUAuidJeLP7P
 =tGki
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux

Pull xtensa updates from Chris Zankel:
 "Support for the latest MMU architecture that allows for a larger
  accessible memory region, and various bug-fixes"

* tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux:
  xtensa: Switch to asm-generic/linkage.h
  xtensa: fix redboot load address
  xtensa: ISS: fix timer_lock usage in rs_open
  xtensa: disable IRQs while IRQ handler is running
  xtensa: enable lockdep support
  xtensa: fix arch_irqs_disabled_flags implementation
  xtensa: add irq flags trace support
  xtensa: provide custom CALLER_ADDR* implementations
  xtensa: add stacktrace support
  xtensa: clean up stpill_registers
  xtensa: don't use a7 in simcalls
  xtensa: don't attempt to use unconfigured timers
  xtensa: provide default platform_pcibios_init implementation
  xtensa: remove KCORE_ELF again
  xtensa: document MMUv3 setup sequence
  xtensa: add MMU v3 support
  xtensa: fix ibreakenable register update
  xtensa: fix oprofile building as module
2013-05-09 14:38:16 -07:00
Geert Uytterhoeven 0757f6159f xtensa simdisk: Fix proc_create_data() conversion fallout
arch/xtensa/platforms/iss/simdisk.c: In function 'proc_read_simdisk':
arch/xtensa/platforms/iss/simdisk.c:220:12: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
arch/xtensa/platforms/iss/simdisk.c: In function 'proc_write_simdisk':
arch/xtensa/platforms/iss/simdisk.c:241:38: error: 'buffer' undeclared (first use in this function)
arch/xtensa/platforms/iss/simdisk.c:241:38: note: each undeclared identifier is reported only once for each function it appears in

Introduced by commit a69755b187 ("xtensa
simdisk: switch to proc_create_data()")

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09 13:20:20 -04:00
Max Filippov efefbcc500 xtensa: ISS: fix timer_lock usage in rs_open
This fixes the following lockdep splat:

[   66.460000] =================================
[   66.460000] [ INFO: inconsistent lock state ]
[   66.460000] 3.9.0-rc5-00161-ga48dd49 #4 Not tainted
[   66.460000] ---------------------------------
[   66.460000] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   66.460000] swapper/1 [HC0[0]:SC1[1]:HE1:SE0] takes:
[   66.460000]  (timer_lock){+.?...}, at: [<d0006cde>] rs_poll+0x12/0xdc
[   66.460000] {SOFTIRQ-ON-W} state was registered at:
[   66.460000]   [<d00421f0>] lock_acquire+0xec/0x13c
[   66.460000]   [<d01ea036>] _raw_spin_lock+0x3a/0x84
[   66.460000]   [<d0006c8c>] rs_open+0x18/0x58
[   66.460000]   [<d0139ea2>] tty_open+0x262/0x3cc
[   66.460000]   [<d00942e0>] chrdev_open+0x8c/0xe0
[   66.460000]   [<d00907b2>] do_dentry_open$isra$16+0x10e/0x190
[   66.460000]   [<d0091141>] finish_open+0x39/0x48
[   66.460000]   [<d009a0b4>] do_last$isra$34+0x6c4/0x824
[   66.460000]   [<d009a27a>] path_openat+0x66/0x310
[   66.460000]   [<d009a53a>] do_filp_open+0x16/0x44
[   66.460000]   [<d0091445>] do_sys_open+0xd5/0x13c
[   66.460000]   [<d00914be>] sys_open+0x12/0x18
[   66.460000]   [<d0413ffc>] kernel_init_freeable+0xe4/0x12c
[   66.460000]   [<d01e2a9c>] kernel_init+0xc/0x9c
[   66.460000]   [<d00044fc>] ret_from_kernel_thread+0x8/0xc
[   66.460000] irq event stamp: 132542
[   66.460000] hardirqs last  enabled at (132542): [<d01ea2ec>] _raw_spin_unlock_irq+0x30/0x44
[   66.460000] hardirqs last disabled at (132541): [<d01ea11e>] _raw_spin_lock_irq+0xe/0x8c
[   66.460000] softirqs last  enabled at (132234): [<d0017d32>] __do_softirq+0x216/0x2a4
[   66.460000] softirqs last disabled at (132539): [<d0018024>] irq_exit+0x38/0x40
[   66.460000]
[   66.460000] other info that might help us debug this:
[   66.460000]  Possible unsafe locking scenario:
[   66.460000]
[   66.460000]        CPU0
[   66.460000]        ----
[   66.460000]   lock(timer_lock);
[   66.460000]   <Interrupt>
[   66.460000]     lock(timer_lock);
[   66.460000]
[   66.460000]  *** DEADLOCK ***
[   66.460000]
[   66.460000] 1 lock held by swapper/1:
[   66.460000]  #0:  (((&serial_timer))){+.-...}, at: [<d001c65c>] call_timer_fn+0x0/0x1f0
[   66.460000]
Stack: d7c2fac0 00000018 00000004 00000001 d7c2faa0 00000004 00000006 d7c2fa90
       9003e87c d7c2fae0 d7c30000 d025a87c 00000001 0000000f 00000000 d7c2fac0
       9004005d d7c2fb10 d7c30000 d7c30338 00000001 00000001 00000000 d7c30338
[   66.460000] Call Trace:
[   66.460000]  [<d01e4f93>] print_usage_bug$part$26+0x1c3/0x1c8
[   66.460000]  [<d003e87c>] mark_lock+0x2b4/0x440
[   66.460000]  [<d004005d>] __lock_acquire+0x54d/0x16c4
[   66.460000]  [<d00421f0>] lock_acquire+0xec/0x13c
[   66.460000]  [<d01ea036>] _raw_spin_lock+0x3a/0x84
[   66.460000]  [<d0006cde>] rs_poll+0x12/0xdc
[   66.460000]  [<d001c71a>] call_timer_fn+0xbe/0x1f0
[   66.460000]  [<d001cd90>] run_timer_softirq+0x198/0x1f4
[   66.460000]  [<d0017c30>] __do_softirq+0x114/0x2a4
[   66.460000]  [<d0018024>] irq_exit+0x38/0x40
[   66.460000]  [<d00046c0>] do_IRQ+0x44/0x48
[   66.460000]  [<d0005c58>] do_interrupt+0x4c/0x54
[   66.460000]  [<d0003c80>] common_exception_return+0x0/0x5c
[   66.460000]  [<d006682c>] free_pcppages_bulk+0x254/0x308
[   66.460000]

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09 01:07:11 -07:00
Max Filippov f4b93ba931 xtensa: don't use a7 in simcalls
To support FRAME_POINTER avoid using a7 in __simc (none of the existing
simcalls needs it). Replace calls to __simc with more specific
simc_read, simc_write and simc_lseek calls.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09 01:07:10 -07:00
Max Filippov b06c14e5c1 xtensa: provide default platform_pcibios_init implementation
This fixes the following build error:

  arch/xtensa/kernel/built-in.o:(.init.literal+0xe8): undefined reference
	to `platform_pcibios_init'
  arch/xtensa/kernel/built-in.o: In function `setup_arch':
  (.init.text+0x20e): undefined reference to `platform_pcibios_init'

and allows platform to omit definition of platform_pcibios_init if it's
empty.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09 01:07:09 -07:00
Max Filippov d83ff0bb82 xtensa: fix ibreakenable register update
Only set the register when there is at least one ibreak register,
otherwise the build fails:
	arch/xtensa/kernel/head.S:105: Error: invalid register 'ibreakenable'
	for 'wsr' instruction
	arch/xtensa/platforms/iss/setup.c:67: Error: invalid register
	'ibreakenable' for 'wsr' instruction

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-05-09 01:07:09 -07:00
Al Viro db2a144bed block_device_operations->release() should return void
The value passed is 0 in all but "it can never happen" cases (and those
only in a couple of drivers) *and* it would've been lost on the way
out anyway, even if something tried to pass something meaningful.
Just don't bother.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-07 02:16:21 -04:00
Al Viro 4fe56e8082 xtensa simdisk: fix braino in "xtensa simdisk: switch to proc_create_data()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-04 16:02:42 -04:00
Al Viro d9dda78bad procfs: new helper - PDE_DATA(inode)
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:32 -04:00
Al Viro a69755b187 xtensa simdisk: switch to proc_create_data()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:31 -04:00
Linus Torvalds 9626357371 Changes for arch/xtensa for the 3.9 merge window.
Added features:
 - add support for thread local storage (TLS)
 - add accept4 and finit_module syscalls
 - support medium-priority interrupts
 - add support for dc232c processor variant
 - support file-base simulated disk for ISS simulator
 
 Bug fixes:
 - fix return values returned by the  str[n]cmp functions
 - avoid mmap cache aliasing
 - fix handling of 'windowed registers' in ptrace
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRLSzaAAoJEI9vqH3mFV2s+1AQAIgjO8Q5EcoI6jAvSuTiAbOn
 GQOfSH7hIFkdIuTXZ76JxGfsUHQgsWF7pZMtK6B29P/qS/xIJJsHRA7kwNIiBT/T
 PRYQLrqbZwdRFr1FRgUlU/kBwFALYuEt/wC5z9A33Bv/kBDYNKsQUBiKH7L2qvC9
 6XC7xZ0cG6+8WPgqFt3+lPGyv3z9gD96rlZr2/heuvM68SrNjcchB/19thzLL8uR
 xxgNlapvih+PK6ZivT+5c2cxOK55FkyaLk0jhsCOakpx4aCrxTlQ0Mm/Do+bIn24
 n41X18xnVhsXypcYZ6/ywLeuAeLUH8A8hClb0Ksu6uUSD+umWQJ89mpuQANG28JP
 9e/5d7C6FeHtz+h1ooIveqtI/mFYfspi34En03ByfQurq6q3Z/GOw+6gWA3TRML3
 uwEk92P5zCtjL2kk+vWHJKHf602HaNx8KKvT210sc5sYyjCCPBSxmfeFQ6eDsQ6g
 sdHoxGpbLrYyh7kVIMAdHQe01o6CcUvWBe7+awsDKF0ebqGx6nTVhy8ipphgBm8Q
 m0TUKawD+UCYBfcbYN86sBh0+RNQoHlJsNLpAcDF0xDUPlq0ejmQ6dZj0Z5xA9Qn
 KWOp2rO1KkNDPFvAszkgdsXZqjWhQbsVZw0IF8Ma3YBRAtwl63WRM4SCFCpY5O8U
 jErzdORgjupGt/A7C9Rk
 =ohgg
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-next-20130225' of git://github.com/czankel/xtensa-linux

Pull xtensa update from Chris Zankel:
 "Added features:
   - add support for thread local storage (TLS)

   - add accept4 and finit_module syscalls

   - support medium-priority interrupts

   - add support for dc232c processor variant

   - support file-base simulated disk for ISS simulator

  Bug fixes:

   - fix return values returned by the str[n]cmp functions

   - avoid mmap cache aliasing

   - fix handling of 'windowed registers' in ptrace"

* tag 'xtensa-next-20130225' of git://github.com/czankel/xtensa-linux:
  xtensa: add accept4 syscall
  xtensa: add support for TLS
  xtensa: add missing include asm/uaccess.h to checksum.h
  xtensa: do not enable GENERIC_GPIO by default
  xtensa: complete ptrace handling of register windows
  xtensa: add support for oprofile
  xtensa: move spill_registers to traps.h
  xtensa: ISS: add host file-based simulated disk
  xtensa: fix str[n]cmp return value
  xtensa: avoid mmap cache aliasing
  xtensa: add finit_module syscall
  xtensa: pull signal definitions from signal-defs.h
  xtensa: fix ipc_parse_version selection
  xtensa: dispatch medium-priority interrupts
  xtensa: Add config files for Diamond 233L - Rev C processor variant
  xtensa: use new common dtc rule
  xtensa: rename prom_update_property to of_update_property
2013-02-26 19:53:12 -08:00
Victor Prupis b6c7e873da xtensa: ISS: add host file-based simulated disk
Simdisk is a block device that maps to a file in the host file system.
It is usable for testing in the simulated environment, like xt-sim or
QEMU. Device binding to host file may be changed at runtime via proc
interface provided the device is not in use. Number of block devices
and initial binding to host files is controlled via kernel/module
parameters, with defaults specified in the kernel configuration.

Signed-off-by: Victor Prupis <vnp@tensilica.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-02-23 19:22:41 -08:00
Max Filippov 127bc79e30 xtensa: rename prom_update_property to of_update_property
This rename happened in 79d1c71 powerpc+of: Rename the drivers/of prom_*
functions to of_*.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2013-02-23 19:12:51 -08:00
Jiri Slaby 2e124b4a39 TTY: switch tty_flip_buffer_push
Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 22:30:15 -08:00
Jiri Slaby 92a19f9cec TTY: switch tty_insert_flip_char
Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

tty_insert_flip_char is the next one to proceed. This one is used all
over the code, so the patch is huge.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 22:21:36 -08:00
Chris Zankel 33c760fbb7 xtensa: set the correct ethernet address for xtfpga
The last byte of the mac address is determined by a DIP switch, so
update the OF property with that address.

Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18 21:10:26 -08:00
Wei Yongjun 90e3bc798b Use for_each_compatible_node() macro.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18 21:10:25 -08:00
Max Filippov 0d456bad36 xtensa: add support for the XTFPGA boards
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with
an Xtensa processor and an OpenCores Ethernet device.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18 21:10:24 -08:00
Max Filippov 288dc2b68c xtensa: properly fix missing compiler barrier in simcall
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18 21:10:21 -08:00
Max Filippov 94d6c61b97 xtensa: ISS: add BASE_BAUD definition to serial.h
This fixes the following build error in allyesconfig:

drivers/tty/serial/8250/8250_early.c: In function 'parse_options':
drivers/tty/serial/8250/8250_early.c:160:18: error: 'BASE_BAUD' undeclared (first use in this function)

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-18 21:10:21 -08:00
Jiri Slaby 191c5f1027 TTY: call tty_port_destroy in the rest of drivers
After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

To be sure, the TTY buffers (and later some stuff) are gone along with
the tty_port, we have to call tty_port_destroy at tear-down places.
This is mostly where the structure containing a tty_port is freed.
This patch does exactly that -- put tty_port_destroy at those places.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:20:58 -08:00
Max Filippov bc5378fcba xtensa: reorganize SR referencing
- reference SRs by names where possible, not by numbers;
- get rid of __stringify around SR names where possible;
- remove unneeded SR names from asm/regs.h;
- add SREG_ prefix to remaining SR names;

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15 21:48:08 -07:00
Max Filippov c88d8df0cc xtensa: ISS: fix rs_put_char
ISS serial console prints garbage instead of symbols printed via
rs_put_char. gcc optimizes away putting prined symbol into memory buffer
because there's no evidence that the buffer is used afterwards.

Make rs_put_char and rs_write use simc_write that has explicit wmb.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15 21:39:20 -07:00
Max Filippov 50c08f8e9f xtensa: ISS: fix specific simcalls
Simcalls that take memory buffer definitely need wmb or rmb to make sure
gcc doesn't optimize away code that fills the buffer.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
2012-10-15 21:39:05 -07:00