Include the NLM_F_CREATE and NLM_F_EXCL flags in netlink event
notifications, otherwise userspace cannot distiguish between create and
add commands.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Deactivate old rule first, then append the new rule, so rule replacement
notification via netlink first reports the deletion of the old rule with
handle X in first place, then it adds the new rule (reusing the handle X
of the replaced old rule).
Note that the abort path releases the transaction that has been created
by nft_delrule() on error.
Fixes: ca08987885 ("netfilter: nf_tables: deactivate expressions in rule replecement routine")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add position handle to allow to identify the rule location from netlink
events. Otherwise, userspace cannot incrementally update a userspace
cache through monitoring events.
Skip handle dump if the rule has been either inserted (at the beginning
of the ruleset) or appended (at the end of the ruleset), the
NLM_F_APPEND netlink flag is sufficient in these two cases.
Handle NLM_F_REPLACE as NLM_F_APPEND since the rule replacement
expansion appends it after the specified rule handle.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Syzbot was able to trigger the following warning [1]
No repro found by syzbot yet but I was able to trigger similar issue
by having 2 scripts running in parallel, changing conntrack hash sizes,
and:
for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done
It would take more than 5 minutes for net_namespace structures
to be cleaned up.
This is because nf_ct_iterate_cleanup() has to restart everytime
a resize happened.
By adding a mutex, we can serialize hash resizes and cleanups
and also make get_next_corpse() faster by skipping over empty
buckets.
Even without resizes in the picture, this patch considerably
speeds up network namespace dismantles.
[1]
INFO: task syz-executor.0:8312 can't die for more than 144 seconds.
task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006
Call Trace:
context_switch kernel/sched/core.c:4955 [inline]
__schedule+0x940/0x26f0 kernel/sched/core.c:6236
preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408
preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35
__local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390
local_bh_enable include/linux/bottom_half.h:32 [inline]
get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline]
nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275
nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469
ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171
setup_net+0x639/0xa30 net/core/net_namespace.c:349
copy_net_ns+0x319/0x760 net/core/net_namespace.c:470
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226
ksys_unshare+0x445/0x920 kernel/fork.c:3128
__do_sys_unshare kernel/fork.c:3202 [inline]
__se_sys_unshare kernel/fork.c:3200 [inline]
__x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f63da68e739
RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110
RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000
RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80
R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000
Showing all locks held in the system:
1 lock held by khungtaskd/27:
#0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446
2 locks held by kworker/u4:2/153:
#0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline]
#0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline]
#0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline]
#0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline]
#0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268
#1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272
1 lock held by systemd-udevd/2970:
1 lock held by in:imklog/6258:
#0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990
3 locks held by kworker/1:6/8158:
1 lock held by syz-executor.0/8312:
2 locks held by kworker/u4:13/9320:
1 lock held by syz-executor.5/10178:
1 lock held by syz-executor.4/10217:
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
iptables/nftables has two types of log modules:
1. backend, e.g. nf_log_syslog, which implement the functionality
2. frontend, e.g. xt_LOG or nft_log, which call the functionality
provided by backend based on nf_tables or xtables rule set.
Problem is that the request_module() call to load the backed in
nf_logger_find_get() might happen with nftables transaction mutex held
in case the call path is via nf_tables/nft_compat.
This can cause deadlocks (see 'Fixes' tags for details).
The chosen solution as to let modprobe deal with this by adding 'pre: '
soft dep tag to xt_LOG (to load the syslog backend) and xt_NFLOG (to
load nflog backend).
Eric reports that this breaks on systems with older modprobe that
doesn't support softdeps.
Another, similar issue occurs when someone either insmods xt_(NF)LOG
directly or unloads the backend module (possible if no log frontend
is in use): because the frontend module is already loaded, modprobe is
not invoked again so the softdep isn't evaluated.
Add a workaround: If nf_logger_find_get() returns -ENOENT and call
is not via nft_compat, load the backend explicitly and try again.
Else, let nft_compat ask for deferred request_module via nf_tables
infra.
Softdeps are kept in-place, so with newer modprobe the dependencies
are resolved from userspace.
Fixes: cefa31a9d4 ("netfilter: nft_log: perform module load from nf_tables")
Fixes: a38b5b56d6 ("netfilter: nf_log: add module softdeps")
Reported-and-tested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ipv4 and device notifiers are called with RTNL mutex held.
The table walk can take some time, better not block other RTNL users.
'ip a' has been reported to block for up to 20 seconds when conntrack table
has many entries and device down events are frequent (e.g., PPP).
Reported-and-tested-by: Martin Zaharinov <micron10@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
masq_inet6_event is called asynchronously from system work queue,
because the inet6 notifier is atomic and nf_iterate_cleanup can sleep.
The ipv4 and device notifiers call nf_iterate_cleanup directly.
This is legal, but these notifiers are called with RTNL mutex held.
A large conntrack table with many devices coming and going will have severe
impact on the system usability, with 'ip a' blocking for several seconds.
This change places the defer code into a helper and makes it more
generic so ipv4 and ifdown notifiers can be converted to defer the
cleanup walk as well in a follow patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
syzbot reports following UAF:
BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955
nla_strcmp+0xf2/0x130 lib/nlattr.c:836
nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570
nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline]
nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064
nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
Problem is that all get operations are lockless, so the commit_mutex
held by nft_rcv_nl_event() isn't enough to stop a parallel GET request
from doing read-accesses to the table object even after synchronize_rcu().
To avoid this, unlink the table first and store the table objects in
on-stack scratch space.
Fixes: 6001a930ce ("netfilter: nftables: introduce table ownership")
Reported-and-tested-by: syzbot+f31660cf279b0557160c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to the conntrack change, also use the zone id for the nat source
lists if the zone id is valid in both directions.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit deedb59039 ("netfilter: nf_conntrack: add direction support for zones")
removed the zone id from the hash value.
This has implications on hash chain lengths with overlapping tuples, which
can hit 64k entries on released kernels, before upper droplimit was added
in d7e7747ac5 ("netfilter: refuse insertion if chain has grown too large").
With that change reverted, test script coming with this series shows
linear insertion time growth:
10000 entries in 3737 ms (now 10000 total, loop 1)
10000 entries in 16994 ms (now 20000 total, loop 2)
10000 entries in 47787 ms (now 30000 total, loop 3)
10000 entries in 72731 ms (now 40000 total, loop 4)
10000 entries in 95761 ms (now 50000 total, loop 5)
10000 entries in 96809 ms (now 60000 total, loop 6)
inserted 60000 entries from packet path in 333825 ms
With d7e7747ac5 in place, the test fails.
There are three supported zone use cases:
1. Connection is in the default zone (zone 0).
This means to special config (the default).
2. Connection is in a different zone (1 to 2**16).
This means rules are in place to put packets in
the desired zone, e.g. derived from vlan id or interface.
3. Original direction is in zone X and Reply is in zone 0.
3) allows to use of the existing NAT port collision avoidance to provide
connectivity to internet/wan even when the various zones have overlapping
source networks separated via policy routing.
In case the original zone is 0 all three cases are identical.
There is no way to place original direction in zone x and reply in
zone y (with y != 0).
Zones need to be assigned manually via the iptables/nftables ruleset,
before conntrack lookup occurs (raw table in iptables) using the
"CT" target conntrack template support
(-j CT --{zone,zone-orig,zone-reply} X).
Normally zone assignment happens based on incoming interface, but could
also be derived from packet mark, vlan id and so on.
This means that when case 3 is used, the ruleset will typically not even
assign a connection tracking template to the "reply" packets, so lookup
happens in zone 0.
However, it is possible that reply packets also match a ct zone
assignment rule which sets up a template for zone X (X > 0) in original
direction only.
Therefore, after making the zone id part of the hash, we need to do a
second lookup using the reply zone id if we did not find an entry on
the first lookup.
In practice, most deployments will either not use zones at all or the
origin and reply zones are the same, no second lookup is required in
either case.
After this change, packet path insertion test passes with constant
insertion times:
10000 entries in 1064 ms (now 10000 total, loop 1)
10000 entries in 1074 ms (now 20000 total, loop 2)
10000 entries in 1066 ms (now 30000 total, loop 3)
10000 entries in 1079 ms (now 40000 total, loop 4)
10000 entries in 1081 ms (now 50000 total, loop 5)
10000 entries in 1082 ms (now 60000 total, loop 6)
inserted 60000 entries from packet path in 6452 ms
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to commit 67d6d681e1
("ipv4: make exception cache less predictible"):
Use a random drop length to make it harder to detect when entries were
hashed to same bucket list.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ip_vs_conn_tab_bits may be provided by the user through the
conn_tab_bits module parameter. If this value is greater than 31, or
less than 0, the shift operator used to derive tab_size causes undefined
behaviour.
Fix this checking ip_vs_conn_tab_bits value to be in the range specified
in ipvs Kconfig. If not, simply use default value.
Fixes: 6f7edb4881 ("IPVS: Allow boot time change of hash size")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Protect nft_ct template with global mutex, from Pavel Skripkin.
2) Two recent commits switched inet rt and nexthop exception hashes
from jhash to siphash. If those two spots are problematic then
conntrack is affected as well, so switch voer to siphash too.
While at it, add a hard upper limit on chain lengths and reject
insertion if this is hit. Patches from Florian Westphal.
3) Fix use-after-scope in nf_socket_ipv6 reported by KASAN,
from Benjamin Hesmans.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: socket: icmp6: fix use-after-scope
netfilter: refuse insertion if chain has grown too large
netfilter: conntrack: switch to siphash
netfilter: conntrack: sanitize table size default settings
netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex
====================
Link: https://lore.kernel.org/r/20210903163020.13741-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2021-08-31
We've added 116 non-merge commits during the last 17 day(s) which contain
a total of 126 files changed, 6813 insertions(+), 4027 deletions(-).
The main changes are:
1) Add opaque bpf_cookie to perf link which the program can read out again,
to be used in libbpf-based USDT library, from Andrii Nakryiko.
2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu.
3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang.
4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch
to another congestion control algorithm during init, from Martin KaFai Lau.
5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima.
6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta.
7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT}
progs, from Xu Liu and Stanislav Fomichev.
8) Support for __weak typed ksyms in libbpf, from Hao Luo.
9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky.
10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov.
11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann.
12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian,
Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others.
13) Another big batch to revamp XDP samples in order to give them consistent look
and feel, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits)
MAINTAINERS: Remove self from powerpc BPF JIT
selftests/bpf: Fix potential unreleased lock
samples: bpf: Fix uninitialized variable in xdp_redirect_cpu
selftests/bpf: Reduce more flakyness in sockmap_listen
bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS
bpf: selftests: Add dctcp fallback test
bpf: selftests: Add connect_to_fd_opts to network_helpers
bpf: selftests: Add sk_state to bpf_tcp_helpers.h
bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt
selftests: xsk: Preface options with opt
selftests: xsk: Make enums lower case
selftests: xsk: Generate packets from specification
selftests: xsk: Generate packet directly in umem
selftests: xsk: Simplify cleanup of ifobjects
selftests: xsk: Decrease sending speed
selftests: xsk: Validate tx stats on tx thread
selftests: xsk: Simplify packet validation in xsk tests
selftests: xsk: Rename worker_* functions that are not thread entry points
selftests: xsk: Disassociate umem size with packets sent
selftests: xsk: Remove end-of-test packet
...
====================
Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also add a stat counter for this that gets exported both via old /proc
interface and ctnetlink.
Assuming the old default size of 16536 buckets and max hash occupancy of
64k, this results in 128k insertions (origin+reply), so ~8 entries per
chain on average.
The revised settings in this series will result in about two entries per
bucket on average.
This allows a hard-limit ceiling of 64.
This is not tunable at the moment, but its possible to either increase
nf_conntrack_buckets or decrease nf_conntrack_max to reduce average
lengths.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace jhash in conntrack and nat core with siphash.
While at it, use the netns mix value as part of the input key
rather than abuse the seed value.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
conntrack has two distinct table size settings:
nf_conntrack_max and nf_conntrack_buckets.
The former limits how many conntrack objects are allowed to exist
in each namespace.
The second sets the size of the hashtable.
As all entries are inserted twice (once for original direction, once for
reply), there should be at least twice as many buckets in the table than
the maximum number of conntrack objects that can exist at the same time.
Change the default multiplier to 1 and increase the chosen bucket sizes.
This results in the same nf_conntrack_max settings as before but reduces
the average bucket list length.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch introduces netfilter hooks for solving the problem that
conntrack couldn't record both inner flows and outer flows.
This patch also introduces a new sysctl toggle for enabling lightweight
tunnel netfilter hooks.
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add counters and timestamps (if available) to the conntrack object
that is represented in nfnetlink_log and _queue messages.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reuse the conntrack event notofier struct, this allows to remove the
extra register/unregister functions and avoids a pointer in struct net.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This prepares for merge for ct and exp notifier structs.
The 'fcn' member is renamed to something unique.
Second, the register/unregister api is simplified. There is only
one implementation so there is no need to do any error checking.
Replace the EBUSY logic with WARN_ON_ONCE. This allows to remove
error unwinding.
The exp notifier register/unregister function is removed in
a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_ct_deliver_cached_events and nf_conntrack_eventmask_report are very
similar. Split nf_conntrack_eventmask_report into a common helper
function that can be used for both cases.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
... by changing:
if (unlikely(ret < 0 || missed)) {
if (ret < 0) {
to
if (likely(ret >= 0 && !missed))
goto out;
if (ret < 0) {
After this nf_conntrack_eventmask_report and nf_ct_deliver_cached_events
look pretty much the same, next patch moves common code to a helper.
This patch has no effect on generated code.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_conntrack_eventmask_report and nf_ct_deliver_cached_events shared
most of their code. This unifies the layout by changing
if (nf_ct_is_confirmed(ct)) {
foo
}
to
if (!nf_ct_is_confirmed(ct)))
return
foo
This removes one level of indentation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, when creating an ingress qdisc on an indirect device before
the driver registered for callbacks, the driver will not have a chance
to register its filter configuration callbacks.
To fix that, modify the code such that it keeps track of all the ingress
qdiscs that call flow_indr_dev_setup_offload(). When a driver calls
flow_indr_dev_register(), go through the list of tracked ingress qdiscs
and call the driver callback entry point so as to give it a chance to
register its callback.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Turn BPF_PROG_RUN into a proper always inlined function. No functional and
performance changes are intended, but it makes it much easier to understand
what's going on with how BPF programs are actually get executed. It's more
obvious what types and callbacks are expected. Also extra () around input
parameters can be dropped, as well as `__` variable prefixes intended to avoid
naming collisions, which makes the code simpler to read and write.
This refactoring also highlighted one extra issue. BPF_PROG_RUN is both
a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning
BPF_PROG_RUN into a function causes naming conflict compilation error. So
rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to
bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of
BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Use nfnetlink_unicast() instead of netlink_unicast() in nft_compat.
2) Remove call to nf_ct_l4proto_find() in flowtable offload timeout
fixup.
3) CLUSTERIP registers ARP hook on demand, from Florian.
4) Use clusterip_net to store pernet warning, also from Florian.
5) Remove struct netns_xt, from Florian Westphal.
6) Enable ebtables hooks in initns on demand, from Florian.
7) Allow to filter conntrack netlink dump per status bits,
from Florian Westphal.
8) Register x_tables hooks in initns on demand, from Florian.
9) Remove queue_handler from per-netns structure, again from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot hit use-after-free in nf_tables_dump_sets. The problem was in
missing lock protection for nft_ct_pcpu_template_refcnt.
Before commit f102d66b33 ("netfilter: nf_tables: use dedicated
mutex to guard transactions") all transactions were serialized by global
mutex, but then global mutex was changed to local per netnamespace
commit_mutex.
This change causes use-after-free bug, when 2 netnamespaces concurently
changing nft_ct_pcpu_template_refcnt without proper locking. Fix it by
adding nft_ct_pcpu_mutex and protect all nft_ct_pcpu_template_refcnt
changes with it.
Fixes: f102d66b33 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-and-tested-by: syzbot+649e339fa6658ee623d3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This was done to detect when the pernet->init() function was not called
yet, by checking if net->nf.queue_handler is NULL.
Once the nfnetlink_queue module is active, all struct net pointers
contain the same address. So place this back in nf_queue.c.
Handle the 'netns error unwind' test by checking nfnl_queue_net for a
NULL pointer and add a comment for this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For historical reasons x_tables still register tables by default in the
initial namespace.
Only newly created net namespaces add the hook on demand.
This means that the init_net always pays hook cost, even if no filtering
rules are added (e.g. only used inside a single netns).
Note that the hooks are added even when 'iptables -L' is called.
This is because there is no way to tell 'iptables -A' and 'iptables -L'
apart at kernel level.
The only solution would be to register the table, but delay hook
registration until the first rule gets added (or policy gets changed).
That however means that counters are not hooked either, so 'iptables -L'
would always show 0-counters even when traffic is flowing which might be
unexpected.
This keeps table and hook registration consistent with what is already done
in non-init netns: first iptables(-save) invocation registers both table
and hooks.
This applies the same solution adopted for ebtables.
All tables register a template that contains the l3 family, the name
and a constructor function that is called when the initial table has to
be added.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The NFPROTO_INET pseudofamily is not exposed through this new netlink
interface. The netlink dump either shows NFPROTO_IPV4 or NFPROTO_IPV6
for NFPROTO_INET prerouting/input/forward/output/postrouting hooks.
The NFNLA_CHAIN_FAMILY attribute provides the family chain, which
specifies if this hook applies to inet traffic only (either IPv4 or
IPv6).
Translate the inet/ingress hook to netdev/ingress to fully hide the
NFPROTO_INET implementation details.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
These two sysctls were added because the hardcoded defaults (2 minutes,
tcp, 30 seconds, udp) turned out to be too low for some setups.
They appeared in 5.14-rc1 so it should be fine to remove it again.
Marcelo convinced me that there should be no difference between a flow
that was offloaded vs. a flow that was not wrt. timeout handling.
Thus the default is changed to those for TCP established and UDP stream,
5 days and 120 seconds, respectively.
Marcelo also suggested to account for the timeout value used for the
offloading, this avoids increase beyond the value in the conntrack-sysctl
and will also instantly expire the conntrack entry with altered sysctls.
Example:
nf_conntrack_udp_timeout_stream=60
nf_flowtable_udp_timeout=60
This will remove offloaded udp flows after one minute, rather than two.
An earlier version of this patch also cleared the ASSURED bit to
allow nf_conntrack to evict the entry via early_drop (i.e., table full).
However, it looks like we can safely assume that connection timed out
via HW is still in established state, so this isn't needed.
Quoting Oz:
[..] the hardware sends all packets with a set FIN flags to sw.
[..] Connections that are aged in hardware are expected to be in the
established state.
In case it turns out that back-to-sw-path transition can occur for
'dodgy' connections too (e.g., one side disappeared while software-path
would have been in RETRANS timeout), we can adjust this later.
Cc: Oz Shlomo <ozsh@nvidia.com>
Cc: Paul Blakey <paulb@nvidia.com>
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use the same family as the request message, for consistency. The
netlink payload provides sufficient information to describe the hook
object, including the family.
This makes it easier to userspace to correlate the hooks are that
visited by the packets for a certain family.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The sequence number allows to correlate the netlink reply message (as
part of the dump) with the original request message.
The cb->seq field is internally used to detect an interference (update)
of the hook list during the netlink dump, do not use it as sequence
number in the netlink dump header.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The family is relevant for pseudo-families like NFPROTO_INET
otherwise the user needs to rely on the hook function name to
differentiate it from NFPROTO_IPV4 and NFPROTO_IPV6 names.
Add nfnl_hook_chain_desc_attributes instead of using the existing
NFTA_CHAIN_* attributes, since these do not provide a family number.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NFNLA_HOOK_FUNCTION_NAME should include the hook function name only,
the module name is already provided by NFNLA_HOOK_MODULE_NAME.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Michal Kubecek reports that conntrack gc is responsible for frequent
wakeups (every 125ms) on idle systems.
On busy systems, timed out entries are evicted during lookup.
The gc worker is only needed to remove entries after system becomes idle
after a busy period.
To resolve this, always scan the entire table.
If the scan is taking too long, reschedule so other work_structs can run
and resume from next bucket.
After a completed scan, wait for 2 minutes before the next cycle.
Heuristics for faster re-schedule are removed.
GC_SCAN_INTERVAL could be exposed as a sysctl in the future to allow
tuning this as-needed or even turn the gc worker off.
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CTA_STATUS is present, but CTA_STATUS_MASK is not, then the
mask is automatically set to 'status', so that kernel returns those
entries that have all of the requested bits set.
This makes more sense than using a all-one mask since we'd hardly
ever find a match.
There are no other checks for status bits, so if e.g. userspace
sets impossible combinations it will get an empty dump.
If kernel would reject unknown status bits, then a program that works on
a future kernel that has IPS_FOO bit fails on old kernels.
Same for 'impossible' combinations:
Kernel never sets ASSURED without first having set SEEN_REPLY, but its
possible that a future kernel could do so.
Therefore no sanity tests other than a 0-mask.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ctnetlink dumps can be filtered based on the connmark.
Prepare for status bit filtering by using a named structure and by
moving the mark parsing code to a helper.
Else ctnetlink_alloc_filter size grows a bit too big for my taste
when status handling is added.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
clusterip is now handled via net_generic.
NOTRACK is tiny compared to rest of xt_CT feature set, even the existing
deprecation warning is bigger than the actual functionality.
Just remove the warning, its not worth keeping/adding a net_generic one.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
TCP and UDP are built-in conntrack protocol trackers and the flowtable
only supports for TCP and UDP, remove this call.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use nfnetlink_unicast() which already translates EAGAIN to ENOBUFS,
since EAGAIN is reserved to report missing module dependencies to the
nfnetlink core.
e0241ae6ac ("netfilter: use nfnetlink_unicast() forgot to update
this spot.
Reported-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The only user of this variable is in an #ifdef:
net/netfilter/nfnetlink_hook.c: In function 'nfnl_hook_entries_head':
net/netfilter/nfnetlink_hook.c:177:28: error: unused variable 'netdev' [-Werror=unused-variable]
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified.
Fixes: d07db9884a ("netfilter: nf_tables: introduce nft_validate_register_load()")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso
Eric Dumazet
Florian Westphal
Andrea Claudi
Jozsef Kadlecsik
Jakub Kicinski
Ryoga Saito
Eli Cohen
Andrii Nakryiko
David S. Miller
Pavel Skripkin
Yajun Deng
Arnd Bergmann