Граф коммитов

289 Коммитов

Автор SHA1 Сообщение Дата
Peter Xu 4064b98270 mm: allow VM_FAULT_RETRY for multiple times
The idea comes from a discussion between Linus and Andrea [1].

Before this patch we only allow a page fault to retry once.  We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time.  This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page.  However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.

This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY.  It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event.  Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.

Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):

  - ALLOW_RETRY and !TRIED:  this means the page fault allows to
                             retry, and this is the first try

  - ALLOW_RETRY and TRIED:   this means the page fault allows to
                             retry, and this is not the first try

  - !ALLOW_RETRY and !TRIED: this means the page fault does not allow
                             to retry at all

  - !ALLOW_RETRY and TRIED:  this is forbidden and should never be used

In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY).  This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths.  One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.

This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault.  It might also benefit
other potential users who will have similar requirement like userfault
write-protection.

GUP code is not touched yet and will be covered in follow up patch.

Please read the thread below for more information.

[1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/
[2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:30 -07:00
Peter Xu dde1607248 mm: introduce FAULT_FLAG_DEFAULT
Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags.  Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.

Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over.  With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:29 -07:00
Peter Xu 24a62cf41f arc/mm: use helper fault_signal_pending()
Let ARC to use the new helper fault_signal_pending() by moving the signal
check out of the retry logic as standalone.  This should also helps to
simplify the code a bit.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220155843.9172-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:29 -07:00
Linus Torvalds 056df578c2 ARC updates for 5.5-rc1
- Jump Label support for ARC
 
  - kmemleak enabled
 
  - arc mm backend TLB Miss / flush optimizations
 
  - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig
    updates and cleanups
 
  - axs platform pll / video-mode updates
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOXpuCuR6hedrdLCJadfx3eKKwl4FAl3oOlcACgkQadfx3eKK
 wl4HZBAAoE2crAUVCNN+5WweCbkW0UDB69AVcxjRWuL/3y4Va0rfyJyNDjc4g8+p
 QUG8RN2+Pdq3Z7zH0dW5JxRuEWNR5QxKF+KJtaFuEXzLG/XgiMonWBKRocP/SDf9
 oBAe+4beYabhAMc4Kz6SnwbHtFxUCUrRAP5CxlrhW7FF1oK4f5qQ0D8vt3NlgNDJ
 mfBZrsmVUkyiPs19x3uFylgZk4xglw2sV3p8RH+g+40YV+WiG1Xh31ViET4MNctv
 dYuF+EgErtuKHIIknpAbRjCwGSj0Q53L/6HNRoJpTnVKBlqrtLuc5LorG9UeIH6g
 pZJAGAt4GuYaarXX2wPeb69sA+GfVHMVbcZKBCm5UdxpiR3Q+fGk/1aWsb97HZW3
 2uUVq8mEaltXhJDU+Mmym8rfpECvZ8JL3nEJ5r9eTQH+1DhAa7FdRIAW+oO4N4xE
 KahVYzICInrykkn6gFOAA04cr4L3asZ16MHwn02C47FKoUjoM7PVWoVbIz32Dc8P
 7ErMP9TWLc51+ko5hiTxHHRWozpwHCxQavcopgRlZLO3iX1MkmFtYyork8t0Oior
 8jSCwcGBm9XCBMkGznhvVcPQOGMB6/9hhHhgNBPcp5bjMz8GoeZx+dFnW7cKzj4D
 TgsfgqpGzvAF4QWHhmx/f32+Yw5/UTJUzjmXguFKgEJidqIDKIc=
 =DK3r
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta

 - Jump Label support for ARC

 - kmemleak enabled

 - arc mm backend TLB Miss / flush optimizations

 - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig
   updates and cleanups

 - axs platform pll / video-mode updates

* tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: add kmemleak support
  ARC: [plat-axs10x]: remove hardcoded video mode from bootargs
  ARC: [plat-axs10x]: use pgu pll instead of fixed clock
  ARC: ARCv2: jump label: implement jump label patching
  ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3
  ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop
  ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available
  ARC: mm: TLB Miss optim: avoid re-reading ECR
  ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD
  ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg
  ARC: nSIM_700: remove unused network options
  ARC: nSIM_700: switch to DW UART usage
  ARC: merge HAPS-HS with nSIM-HS configs
  ARC: HAPS: cleanup defconfigs from unused ETH drivers
  ARC: HAPS: add HIGHMEM memory zone to DTS
  ARC: HAPS: use same UART configuration everywhere
  ARC: HAPS: cleanup defconfigs from unused IO-related options
  ARC: regenerate nSIM and HAPS defconfigs
2019-12-04 19:06:18 -08:00
Vineet Gupta 6aae3425aa ARC: mm: remove __ARCH_USE_5LEVEL_HACK
Patch series "elide extraneous generated code for folded p4d/pud/pmd", v3.

This series came out of seemingly benign excursion into
understanding/removing __ARCH_USE_5LEVEL_HACK from ARC port showing some
extraneous code being generated despite folded p4d/pud/pmd

| bloat-o-meter2 vmlinux-[AB]*
| add/remove: 0/0 grow/shrink: 3/0 up/down: 130/0 (130)
| function                                     old     new   delta
| free_pgd_range                               548     660    +112
| p4d_clear_bad                                  2      20     +18

The patches here address that

| bloat-o-meter2 vmlinux-[BF]*
| add/remove: 0/2 grow/shrink: 0/1 up/down: 0/-386 (-386)
| function                                     old     new   delta
| pud_clear_bad                                 20       -     -20
| p4d_clear_bad                                 20       -     -20
| free_pgd_range                               660     314    -346

The code savings are not a whole lot, but still worthwhile IMHO.

This patch (of 5):

With paging code made 5-level compliant, this is no longer needed.  ARC
has software page walker with 2 lookup levels (pgd -> pte)

This was expected to be non functional change but ended with slight
code bloat due to needless inclusions of p*d_free_tlb() macros which
will be addressed in further patches.

| bloat-o-meter2 vmlinux-[AB]*
| add/remove: 0/0 grow/shrink: 2/0 up/down: 128/0 (128)
| function                                     old     new   delta
| free_pgd_range                               546     656    +110
| p4d_clear_bad                                  2      20     +18
| Total: Before=4137148, After=4137276, chg 0.000000%

Link: http://lkml.kernel.org/r/20191016162400.14796-2-vgupta@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 06:29:19 -08:00
Christoph Hellwig 56e35f9c5b dma-mapping: drop the dev argument to arch_sync_dma_for_*
These are pure cache maintainance routines, so drop the unused
struct device argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-11-20 20:31:38 +01:00
Vineet Gupta 2f4ecf68a0 ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3
For MMUv3 (and prior) the flush_tlb_{range,mm,page} API use the MMU
TLBWrite cmd which already nukes the entire uTLB, so NO need for
additional IVUTLB cmd from utlb_invalidate() - hence this patch

local_flush_tlb_all() is special since it uses a weaker TLBWriteNI
cmd (prec commit) to shoot down JTLB, hence we retain the explicit
uTLB flush

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:32 -07:00
Vineet Gupta 1355ea2e60 ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop
The unconditional full TLB flush (on say ASID rollover) iterates over each
entry and uses TLBWrite to zero it out. TLBWrite by design also invalidates
the uTLBs thus we end up invalidating it as many times as numbe rof
entries (512 or 1k)

Optimize this by using a weaker TLBWriteNI cmd in loop, which doesn't
tinker with uTLBs and an explicit one time IVUTLB, outside the loop to
invalidate them all once.

And given the optimiztion, the IVUTLB is now needed on MMUv4 too where
the uTLBs and JTLBs are otherwise coherent given the TLBInsertEntry /
TLBDeleteEntry commands

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:32 -07:00
Vineet Gupta ad4c40e937 ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available
TLBWriteNI was introduced in MMUv2 (to not invalidate uTLBs in Fast Path
TLB Refill Handler). To avoid #ifdef'ery make it fallback to TLBWrite availabel on all MMUs. This will also help with next change

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:32 -07:00
Vineet Gupta f4e2f7cc69 ARC: mm: TLB Miss optim: avoid re-reading ECR
For setting PTE Dirty bit, reuse the prior test for ST miss.

No need to reload ECR and test for ST cause code as the prev
condition code is still valid (uncloberred)

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:32 -07:00
Vineet Gupta 0fb1f35ed9 ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:32 -07:00
Vineet Gupta cfd9d70a85 ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg
ARC700 exception (and intr handling) didn't have auto stack switching
thus had to rely on stashing a reg temporarily (to free it up) at a
known place in memory, allowing to code up the low level stack switching.
This however was not re-entrant in SMP which thus had to repurpose the
per-cpu MMU SCRATCH DATA register otherwise used to "cache" the task pdg
pointer (vs. reading it from mm struct)

The newer HS cores do have auto-stack switching and thus even SMP builds
can use the MMU SCRATCH reg as originally intended.

This patch fixes the restriction to ARC700 SMP builds only

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-28 12:12:31 -07:00
Linus Torvalds 671df18953 dma-mapping updates for 5.4:
- add dma-mapping and block layer helpers to take care of IOMMU
    merging for mmc plus subsequent fixups (Yoshihiro Shimoda)
  - rework handling of the pgprot bits for remapping (me)
  - take care of the dma direct infrastructure for swiotlb-xen (me)
  - improve the dma noncoherent remapping infrastructure (me)
  - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me)
  - cleanup mmaping of coherent DMA allocations (me)
  - various misc cleanups (Andy Shevchenko, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl2CSucLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYPfrhAAgXZA/EdFPvkkCoDrmgtf3XkudX9gajeCd9g4NZy6
 ZBQElTVvm4S0sQj7IXgALnMumDMbbTibW5SQLX5GwQDe+XXBpZ8ajpAnJAXc8a5T
 qaFQ4SInr4CgBZf9nZKDkbSBZ1Tu3AQm1c0QI8riRCkrVTuX4L06xpCef4Yh4mgO
 rwWEjIioYpQiKZMmu98riXh3ZNfFG3mVJRhKt8B6XJbBgnUnjDOPYGgaUwp6CU20
 tFBKL2GaaV0vdLJ5wYhIGXT4DJ8tp9T5n3IYGZv1Ux889RaZEHlCrMxzelYeDbCT
 KhZbhcSECGnddsh73t/UX7/KhytuqnfKa9n+Xo6AWuA47xO4c36quOOcTk9M0vE5
 TfGDmewgL6WIv4lzokpRn5EkfDhyL33j8eYJrJ8e0ldcOhSQIFk4ciXnf2stWi6O
 JrlzzzSid+zXxu48iTfoPdnMr7psTpiMvvRvKfEeMp2FX9Fg6EdMzJYLTEl+COHB
 0WwNacZmY3P01+b5EZXEgqKEZevIIdmPKbyM9rPtTjz8BjBwkABHTpN3fWbVBf7/
 Ax6OPYyW40xp1fnJuzn89m3pdOxn88FpDdOaeLz892Zd+Qpnro1ayulnFspVtqGM
 mGbzA9whILvXNRpWBSQrvr2IjqMRjbBxX3BVACl3MMpOChgkpp5iANNfSDjCftSF
 Zu8=
 =/wGv
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - add dma-mapping and block layer helpers to take care of IOMMU merging
   for mmc plus subsequent fixups (Yoshihiro Shimoda)

 - rework handling of the pgprot bits for remapping (me)

 - take care of the dma direct infrastructure for swiotlb-xen (me)

 - improve the dma noncoherent remapping infrastructure (me)

 - better defaults for ->mmap, ->get_sgtable and ->get_required_mask
   (me)

 - cleanup mmaping of coherent DMA allocations (me)

 - various misc cleanups (Andy Shevchenko, me)

* tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits)
  mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE
  mmc: queue: Fix bigger segments usage
  arm64: use asm-generic/dma-mapping.h
  swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page
  swiotlb-xen: simplify cache maintainance
  swiotlb-xen: use the same foreign page check everywhere
  swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable
  xen: remove the exports for xen_{create,destroy}_contiguous_region
  xen/arm: remove xen_dma_ops
  xen/arm: simplify dma_cache_maint
  xen/arm: use dev_is_dma_coherent
  xen/arm: consolidate page-coherent.h
  xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance
  arm: remove wrappers for the generic dma remap helpers
  dma-mapping: introduce a dma_common_find_pages helper
  dma-mapping: always use VM_DMA_COHERENT for generic DMA remap
  vmalloc: lift the arm flag for coherent mappings to common code
  dma-mapping: provide a better default ->get_required_mask
  dma-mapping: remove the dma_declare_coherent_memory export
  remoteproc: don't allow modular build
  ...
2019-09-19 13:27:23 -07:00
Christoph Hellwig 8e3a68fb55 dma-mapping: make dma_atomic_pool_init self-contained
The memory allocated for the atomic pool needs to have the same
mapping attributes that we use for remapping, so use
pgprot_dmacoherent instead of open coding it.  Also deduct a
suitable zone to allocate the memory from based on the presence
of the DMA zones.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-29 16:43:33 +02:00
Eugeniy Paltsev da31076f96 ARC: fix typo in setup_dma_ops log message
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-08-05 12:32:22 +05:30
Linus Torvalds 3eb514866f ARC updates for 5.3-rc1
- long due rewrite of do_page_fault
 
  - refactoring of entry/exit code to utilize the double load/store instructions
 
  - hsdk platform updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdLi8cAAoJEGnX8d3iisJeoZkQAJba/3Q9TZrqMjQ2itVRwHbf
 E/TxpHRy2VynQBHgz81LgvZYQ1wxTCu8FLj8Ie4B2sM0HJ9O1ZPCLzwdQXJmpB4D
 LsY7T6rIGl7R17n3oJ0ZQgYmYki4Fxje9a98W/ylwTDpWPilIvWUwTMpcQ86wQ7K
 9izHv+vZ9hVHKtu2svs3WdDy4rPKMNOZkyheUpzIhsQlmuRMQJEG4I1M432L+4q2
 5Q1nl0XHuVOShqtbmpz/fK9/+A6sArP/hCIbT7i0QsktVAsxwhIwTWUWhCl4GzRi
 Aqq9GWZIciHo2+NmAa+nvrzRmGb/DkAoC+iU2C8xfgqm9fbfKSLNGggGvH1S7+6a
 ZVrB9HIhHO53OGjC4ysnBfHQpi8oGvl7M/AVC3Ij3mdu56aIWRPcmSUiqMa4M+Bc
 preXq+3pto/lC5DpIRHjsAQjNGTsfJua7XKiXngCdmLG/B9hbPCux0B1DG8+9OdY
 IV8BDFtWVWHk7YQpuMXtrb+Zxk28SNdtiPgFgHgp7syKn9v1EIVHoC2Gx1v6C425
 HZtA850dI3JOl/cnCZ5U7KxaDCY8UEcNUkkUnjlo1f2VySkaxPdd8Dw+2IEnB1Hl
 7XefU6BnYsg6DooGtOq0YzxjIzBdS4w4LhsgHuqe4rbRAonLff/rtEnnQrnF2Kdq
 hviAkMxhkVn+CwijUtoO
 =hfiN
 -----END PGP SIGNATURE-----

Merge tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - long due rewrite of do_page_fault

 - refactoring of entry/exit code to utilize the double load/store
   instructions

 - hsdk platform updates

* tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfig
  ARC: [plat-hsdk]: enable DW SPI controller
  ARC: hide unused function unw_hdr_alloc
  ARC: [haps] Add Virtio support
  ARCv2: entry: simplify return to Delay Slot via interrupt
  ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause
  ARCv2: entry: rewrite to enable use of double load/stores LDD/STD
  ARCv2: entry: avoid a branch
  ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE
  ARCv2: entry: comments about hardware auto-save on taken interrupts
  ARC: mm: do_page_fault refactor #8: release mmap_sem sooner
  ARC: mm: do_page_fault refactor #7: fold the various error handling
  ARC: mm: do_page_fault refactor #6: error handlers to use same pattern
  ARC: mm: do_page_fault refactor #5: scoot no_context to end
  ARC: mm: do_page_fault refactor #4: consolidate retry related logic
  ARC: mm: do_page_fault refactor #3: tidyup vma access permission code
  ARC: mm: do_page_fault refactor #2: remove short lived variable
  ARC: mm: do_page_fault refactor #1: remove label @good_area
2019-07-16 15:07:51 -07:00
Linus Torvalds 9e3a25dc99 dma-mapping updates for Linux 5.3
- move the USB special case that bounced DMA through a device
    bar into the USB code instead of handling it in the common
    DMA code (Laurentiu Tudor and Fredrik Noring)
  - don't dip into the global CMA pool for single page allocations
    (Nicolin Chen)
  - fix a crash when allocating memory for the atomic pool failed
    during boot (Florian Fainelli)
  - move support for MIPS-style uncached segments to the common
    code and use that for MIPS and nios2 (me)
  - make support for DMA_ATTR_NON_CONSISTENT and
    DMA_ATTR_NO_KERNEL_MAPPING generic (me)
  - convert nds32 to the generic remapping allocator (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl0nPqgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNj2hAAxIv2O3wv6V5xhzWwOVo8e/xW1ZLlGAF0/z92u0do
 32Tm8jkdAGjZDnyxam7qisMSIjCNykpauQzVVxyUNBRSsn1V5t7KSaH3/OXCOVcr
 x2VWBirxGO2BbRseaCBjIcA/2qna+VIDGFcNXCtf6rM00YUK6qaJzkMwBKQAeYcM
 uJMJkaf8qaW4hygLJP8axXiGFdIJyFNLAlJ+ok6kYsJHHJNceOp0bo3CDa2mJBK9
 IhraK2zVkyE5EQkQM5cE/Kw1ppPelUKUkHwjgM4wpz2b18WbLu11nKP0hmUcvKRQ
 heY8xWiKxN0QTgS03ou7EVylyrSAE4dIKgzuA4VO32QCGsWypcAg4iU6s5TX6p9g
 tZEW2ckE6wbmRdQPyKoDpZg299/eQjRHc4MAA1yinT8tFMokw2tk8Fq1FWyltwL1
 8EiP5oNs2qUNvNgqUresl6/f6YOacFi1Q6IhgBVj6d6lyhMhlsHfW4w1XA1siv/I
 6l4qJbLohYab6hY7i+mBOd8iG/KrAlr4P6admnv2jDchswbb5t2j+ABE9xv++PFi
 u1HFqMlxqdWQaXGca2UeCUxUjkwO9N+kHpP+VRz+6D2b64dtCWSu8CN23sYXm2tO
 ubWIlrQQZPhhMkoFg7XqKSTacd+ut+SXN9Nxsyv548ETV0l1xbiLRHIbhyoIESD5
 RAI=
 =01Fr
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - move the USB special case that bounced DMA through a device bar into
   the USB code instead of handling it in the common DMA code (Laurentiu
   Tudor and Fredrik Noring)

 - don't dip into the global CMA pool for single page allocations
   (Nicolin Chen)

 - fix a crash when allocating memory for the atomic pool failed during
   boot (Florian Fainelli)

 - move support for MIPS-style uncached segments to the common code and
   use that for MIPS and nios2 (me)

 - make support for DMA_ATTR_NON_CONSISTENT and
   DMA_ATTR_NO_KERNEL_MAPPING generic (me)

 - convert nds32 to the generic remapping allocator (me)

* tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits)
  dma-mapping: mark dma_alloc_need_uncached as __always_inline
  MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms
  usb: host: Fix excessive alignment restriction for local memory allocations
  lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators
  nios2: use the generic uncached segment support in dma-direct
  nds32: use the generic remapping allocator for coherent DMA allocations
  arc: use the generic remapping allocator for coherent DMA allocations
  dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code
  dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code
  dma-mapping: add a dma_alloc_need_uncached helper
  openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support
  arc: remove the partial DMA_ATTR_NON_CONSISTENT support
  arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support
  ARM: dma-mapping: allow larger DMA mask than supported
  dma-mapping: truncate dma masks to what dma_addr_t can hold
  iommu/dma: Apply dma_{alloc,free}_contiguous functions
  dma-remap: Avoid de-referencing NULL atomic_pool
  MIPS: use the generic uncached segment support in dma-direct
  dma-direct: provide generic support for uncached kernel segments
  au1100fb: fix DMA API abuse
  ...
2019-07-12 15:13:55 -07:00
Linus Torvalds 5ad18b2e60 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...
2019-07-08 21:48:15 -07:00
Vineet Gupta 23c0cbd0c7 ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE
Upon a taken interrupt/exception from User mode, HS hardware auto sets Z flag.
This helps shave a few instructions from EXCEPTION_PROLOGUE by eliding
re-reading ERSTATUS and some bit fiddling.

However TLB Miss Exception handler can clobber the CPU flags and still end
up in EXCEPTION_PROLOGUE in the slow path handling TLB handling case:

   EV_TLBMissD
     do_slow_path_pf
       EV_TLBProtV (aliased to call_do_page_fault)
          EXCEPTION_PROLOGUE

As a result, EXCEPTION_PROLOGUE need to "unclobber" the Z flag which this
patch changes. It is now pushed out to TLB Miss Exception handler.
The reasons beings:

 - The flag restoration is only needed for slowpath TLB Miss Exception
   handling, but currently being in EXCEPTION_PROLOGUE penalizes all
   exceptions such as ProtV and syscall Trap, where Z flag is already
   as expected.

 - Pushing unclobber out to where it was clobbered is much cleaner and
   also serves to document the fact.

 - Makes EXCEPTION_PROLGUE similar to INTERRUPT_PROLOGUE so easier to
   refactor the common parts which is what this series aims to do

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta 926150db85 ARC: mm: do_page_fault refactor #8: release mmap_sem sooner
In case of successful page fault handling, this patch releases mmap_sem
before updating the perf stat event for major/minor faults. So even
though the contention reduction is NOT super high, it is still an
improvement.

There's an additional code size improvement as we only have 2 up_read()
calls now.

Note to myself:
--------------

1. Given the way it is done, we are forced to move @bad_area label earlier
   causing the various "goto bad_area" cases to hit perf stat code.

 - PERF_COUNT_SW_PAGE_FAULTS is NOW updated for access errors which is what
   arm/arm64 seem to be doing as well (with slightly different code)
 - PERF_COUNT_SW_PAGE_FAULTS_{MAJ,MIN} must NOT be updated for the
   error case which is guarded by now setting @fault initial value
   to VM_FAULT_ERROR which serves both cases when handle_mm_fault()
   returns error or is not called at all.

2. arm/arm64 use two homebrew fault flags VM_FAULT_BAD{MAP,MAPACCESS}
   which I was inclined to add too but seems not needed for ARC

 - given that we have everything is 1 function we can still use goto
 - we setup si_code at the right place (arm* do that in the end)
 - we init fault already to error value which guards entry into perf
   stats event update

Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta 5e91bf5ce9 ARC: mm: do_page_fault refactor #7: fold the various error handling
- single up_read() call vs. 4
 - so much easier on eyes

Technically it seems like @bad_area label moved up, but even in old
regime, it was a special case of delivering SIGSEGV unconditionally
which we now do as well, although with checks.

Also note that @fault needs to be initialized since we can land in
@bad_area (which reads it) without setting it up with return value of
handle_mm_fault() - failing to do so did bite us although as a side
effect of different patch: see [1]

[1]: http://lists.infradead.org/pipermail/linux-snps-arc/2019-May/005803.html

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta 98cb57ad70 ARC: mm: do_page_fault refactor #6: error handlers to use same pattern
- up_read
 - if !user_mode
 - whatever error handling

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta d0542c7eac ARC: mm: do_page_fault refactor #5: scoot no_context to end
This is different than the rest of signal handling stuff

No functional change

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta 02c88d142e ARC: mm: do_page_fault refactor #4: consolidate retry related logic
stats update code can now elide "retry" check and additional level of
indentation since all retry handling is done ahead of it already

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta 85c5e33763 ARC: mm: do_page_fault refactor #3: tidyup vma access permission code
The coding pattern to NOT intialize variables at declaration time but
rather near code which makes us eof them makes it much easier to grok
the overall logic, specially when the init is not simply 0 or 1

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta 13e2cc1240 ARC: mm: do_page_fault refactor #2: remove short lived variable
Compiler will do this anyways, still..

No functional change.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Vineet Gupta 450e5b6f65 ARC: mm: do_page_fault refactor #1: remove label @good_area
Invert the condition for stack expansion.
No functional change

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-07-01 11:02:22 -07:00
Christoph Hellwig f73c904534 arc: use the generic remapping allocator for coherent DMA allocations
Replace the code that sets up uncached PTEs with the generic vmap based
remapping code.  It also provides an atomic pool for allocations from
non-blocking context, which we not properly supported by the existing
arc code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Tested-by: Evgeniy Paltsev <paltsev@synopsys.com>
2019-06-25 14:28:05 +02:00
Christoph Hellwig 80e61fcd23 arc: remove the partial DMA_ATTR_NON_CONSISTENT support
The arc DMA code supports DMA_ATTR_NON_CONSISTENT allocations, but does
not provide a cache_sync operation.  This means any user of it will
never be able to actually transfer cache ownership and thus cause
coherency bugs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Tested-by: Evgeniy Paltsev <paltsev@synopsys.com>
2019-06-25 08:14:24 +02:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Eric W. Biederman 2e1661d267 signal: Remove the task parameter from force_sig_fault
As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.

The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.

The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:

force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29 09:31:43 -05:00
Eric W. Biederman 351b6825b3 signal: Explicitly call force_sig_fault on current
Update the calls of force_sig_fault that pass in a variable that is
set to current earlier to explicitly use current.

This is to make the next change that removes the task parameter
from force_sig_fault easier to verify.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-29 09:31:43 -05:00
Eugeniy Paltsev a8c715b4dd ARC: mm: SIGSEGV userspace trying to access kernel virtual memory
As of today if userspace process tries to access a kernel virtual addres
(0x7000_0000 to 0x7ffff_ffff) such that a legit kernel mapping already
exists, that process hangs instead of being killed with SIGSEGV

Fix that by ensuring that do_page_fault() handles kenrel vaddr only if
in kernel mode.

And given this, we can also simplify the code a bit. Now a vmalloc fault
implies kernel mode so its failure (for some reason) can reuse the
@no_context label and we can remove @bad_area_nosemaphore.

Reproduce user test for original problem:

------------------------>8-----------------
 #include <stdlib.h>
 #include <stdint.h>

 int main(int argc, char *argv[])
 {
 	volatile uint32_t temp;

 	temp = *(uint32_t *)(0x70000000);
 }
------------------------>8-----------------

Cc: <stable@vger.kernel.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-20 10:09:10 -07:00
Vineet Gupta 89c92142f7 ARC: fix build warnings
| arch/arc/mm/tlb.c:914:2: warning: variable length array 'pd0' is used [-Wvla]
| arch/arc/include/asm/cmpxchg.h:95:29: warning: value computed is not used [-Wunused-value]

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-05-20 10:09:10 -07:00
Mike Rapoport 997aef68af init: provide a generic free_initmem implementation
Patch series "provide a generic free_initmem implementation", v2.

Many architectures implement free_initmem() in exactly the same or very
similar way: they wrap the call to free_initmem_default() with sometimes
different 'poison' parameter.

These patches switch those architectures to use a generic implementation
that does free_initmem_default(POISON_FREE_INITMEM).

This was inspired by Christoph's patches for free_initrd_mem [1] and I
shamelessly copied changelog entries from his patches :)

[1] https://lore.kernel.org/lkml/20190213174621.29297-1-hch@lst.de/

This patch (of 2):

For most architectures free_initmem just a wrapper for the same
free_initmem_default(-1) call.  Provide that as a generic implementation
marked __weak.

Link: http://lkml.kernel.org/r/1550515285-17446-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:47 -07:00
Christoph Hellwig 4afd58e14d initramfs: provide a generic free_initrd_mem implementation
For most architectures free_initrd_mem just expands to the same
free_reserved_area call.  Provide that as a generic implementation marked
__weak.

Link: http://lkml.kernel.org/r/20190213174621.29297-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
Cc: Steven Price <steven.price@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:47 -07:00
Vineet Gupta 99bd5fcc50 ARC: PAE40: don't panic and instead turn off hw ioc
HSDK currently panics when built for HIGHMEM/ARC_HAS_PAE40 because ioc
is enabled with default which doesn't work for the 2 non contiguous
memory nodes. So get PAE working by disabling ioc instead.

Tested with !PAE40 by forcing @ioc_enable=0 and running the glibc
testsuite over ssh

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-04-02 12:03:07 -07:00
Mike Rapoport 8a7f97b902 treewide: add checks for the return value of memblock_alloc*()
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com>		[c-sky]
Acked-by: Paul Burton <paul.burton@mips.com>		[MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>	[s390]
Reviewed-by: Juergen Gross <jgross@suse.com>		[Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com>		[xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Vineet Gupta 4d447455e7 ARC: mm: do_page_fault fixes #1: relinquish mmap_sem if signal arrives while handle_mm_fault
do_page_fault() forgot to relinquish mmap_sem if a signal came while
handling handle_mm_fault() - due to say a ctl+c or oom etc.
This would later cause a deadlock by acquiring it twice.

This came to light when running libc testsuite tst-tls3-malloc test but
is likely also the cause for prior seen LTP failures. Using lockdep
clearly showed what the issue was.

| # while true; do ./tst-tls3-malloc ; done
| Didn't expect signal from child: got `Segmentation fault'
| ^C
| ============================================
| WARNING: possible recursive locking detected
| 4.17.0+ #25 Not tainted
| --------------------------------------------
| tst-tls3-malloc/510 is trying to acquire lock:
| 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c
|
|but task is already holding lock:
|606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0
|
| other info that might help us debug this:
|  Possible unsafe locking scenario:
|
|       CPU0
|       ----
|  lock(&mm->mmap_sem);
|  lock(&mm->mmap_sem);
|
| *** DEADLOCK ***
|

------------------------------------------------------------
What the change does is not obvious (note to myself)

prior code was

| do_page_fault
|
|   down_read()		<-- lock taken
|   handle_mm_fault	<-- signal pending as this runs
|   if fatal_signal_pending
|       if VM_FAULT_ERROR
|           up_read
|       if user_mode
|          return	<-- lock still held, this was the BUG

New code

| do_page_fault
|
|   down_read()		<-- lock taken
|   handle_mm_fault	<-- signal pending as this runs
|   if fatal_signal_pending
|       if VM_FAULT_RETRY
|          return       <-- not same case as above, but still OK since
|                           core mm already relinq lock for FAULT_RETRY
|    ...
|
|   < Now falls through for bug case above >
|
|   up_read()		<-- lock relinquished

Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17 16:24:39 -08:00
Eugeniy Paltsev a3010a0465 ARC: adjust memblock_reserve of kernel memory
In setup_arch_memory we reserve the memory area wherein the kernel
is located. Current implementation may reserve more memory than
it actually required in case of CONFIG_LINUX_LINK_BASE is not
equal to CONFIG_LINUX_RAM_BASE. This happens because we calculate
start of the reserved region relatively to the CONFIG_LINUX_RAM_BASE
and end of the region relatively to the CONFIG_LINUX_RAM_BASE.

For example in case of HSDK board we wasted 256MiB of physical memory:
------------------->8------------------------------
Memory: 770416K/1048576K available (5496K kernel code,
    240K rwdata, 1064K rodata, 2200K init, 275K bss,
    278160K reserved, 0K cma-reserved)
------------------->8------------------------------

Fix that.

Fixes: 9ed68785f7 ("ARC: mm: Decouple RAM base address from kernel link addr")
Cc: stable@vger.kernel.org	#4.14+
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17 14:38:00 -08:00
Davidlohr Bueso d8d7d842e8 arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
This is already done for us internally by the signal machinery.

Link: http://lkml.kernel.org/r/20181116002713.8474-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 13:13:48 -08:00
Linus Torvalds 030672aea8 Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...
2018-12-28 20:08:34 -08:00
Linus Torvalds af7ddd8a62 DMA mapping updates for Linux 4.21
A huge update this time, but a lot of that is just consolidating or
 removing code:
 
  - provide a common DMA_MAPPING_ERROR definition and avoid indirect
    calls for dma_map_* error checking
  - use direct calls for the DMA direct mapping case, avoiding huge
    retpoline overhead for high performance workloads
  - merge the swiotlb dma_map_ops into dma-direct
  - provide a generic remapping DMA consistent allocator for architectures
    that have devices that perform DMA that is not cache coherent. Based
    on the existing arm64 implementation and also used for csky now.
  - improve the dma-debug infrastructure, including dynamic allocation
    of entries (Robin Murphy)
  - default to providing chaining scatterlist everywhere, with opt-outs
    for the few architectures (alpha, parisc, most arm32 variants) that
    can't cope with it
  - misc sparc32 dma-related cleanups
  - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
    replace it with the generic noncoherent infrastructure
  - fix the return type of dma_set_max_seg_size (Niklas Söderlund)
  - move the dummy dma ops for not DMA capable devices from arm64 to
    common code (Robin Murphy)
  - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data
    leaks through userspace.  We already did this for most common
    architectures, but this ensures we do it everywhere.
    dma_zalloc_coherent has been deprecated and can hopefully be
    removed after -rc1 with a coccinelle script.
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlwctQgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMxgQ//dBpAfS4/J76CdAbYry2zqgcOUU9hIrD6NHiEMWov
 ltJxyvEl3LsUmIdEj3aCrYL9jZN0qsnCzn5BVj2c3jDIVgD64fAr7HDf/PbEEfKb
 j6/GgEnVLPZV+sQMvhNA5jOzHrkseaqPa4/pNLFZ/l8jnuZ2d+btusDWJpMoVDer
 TXVwtIfgeIu0gTygYOShLYXd5qptWKWsZEpbTZOO2sE6+x+ZJX7yQYUxYDTlcOIj
 JWVO2l5QNHPc5T9o2at+6L5aNUvnZOxT79sWgyZLn0Kc+FagKAVwfLqUEl0v7foG
 8k/xca5/8p3afB1DfrIrtplJqis7cVgdyGxriwuuoO8X4F0nPyWwpGmxsBhrWwwl
 xTqC4UorEJ7QwoP6Azopk/vYI2QXIUBLjuCJCuFXZj9+2BGf4IfvBY1S2cLM9qLs
 HMcxQonuXJii044KEFS96ePEuiT+igVINweIFBKWcgNCEG0UQtyL6RQ1U5297ipF
 JiWZAqD+p9X52UdKS+oKfAiZEekMXn6Xyo97+YCiNpfOo0GP5eEcwhL+JpY4AiRq
 apPXtsRy2o1s8yfjdraUIM2Mc2n62vFKb35oUbGCd/QO9piPrFQHl6T0HHcHk4YR
 XrUXcHieFZBCYqh7ZVa4RL8Msq1wvGuTL4Dxl43mXdsMoUFRR6eSNWLoAV4IpOLZ
 WgA=
 =in72
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping

Pull DMA mapping updates from Christoph Hellwig:
 "A huge update this time, but a lot of that is just consolidating or
  removing code:

   - provide a common DMA_MAPPING_ERROR definition and avoid indirect
     calls for dma_map_* error checking

   - use direct calls for the DMA direct mapping case, avoiding huge
     retpoline overhead for high performance workloads

   - merge the swiotlb dma_map_ops into dma-direct

   - provide a generic remapping DMA consistent allocator for
     architectures that have devices that perform DMA that is not cache
     coherent. Based on the existing arm64 implementation and also used
     for csky now.

   - improve the dma-debug infrastructure, including dynamic allocation
     of entries (Robin Murphy)

   - default to providing chaining scatterlist everywhere, with opt-outs
     for the few architectures (alpha, parisc, most arm32 variants) that
     can't cope with it

   - misc sparc32 dma-related cleanups

   - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
     replace it with the generic noncoherent infrastructure

   - fix the return type of dma_set_max_seg_size (Niklas Söderlund)

   - move the dummy dma ops for not DMA capable devices from arm64 to
     common code (Robin Murphy)

   - ensure dma_alloc_coherent returns zeroed memory to avoid kernel
     data leaks through userspace. We already did this for most common
     architectures, but this ensures we do it everywhere.
     dma_zalloc_coherent has been deprecated and can hopefully be
     removed after -rc1 with a coccinelle script"

* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
  dma-mapping: fix inverted logic in dma_supported
  dma-mapping: deprecate dma_zalloc_coherent
  dma-mapping: zero memory returned from dma_alloc_*
  sparc/iommu: fix ->map_sg return value
  sparc/io-unit: fix ->map_sg return value
  arm64: default to the direct mapping in get_arch_dma_ops
  PCI: Remove unused attr variable in pci_dma_configure
  ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
  dma-mapping: bypass indirect calls for dma-direct
  vmd: use the proper dma_* APIs instead of direct methods calls
  dma-direct: merge swiotlb_dma_ops into the dma_direct code
  dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
  dma-direct: improve addressability error reporting
  swiotlb: remove dma_mark_clean
  swiotlb: remove SWIOTLB_MAP_ERROR
  ACPI / scan: Refactor _CCA enforcement
  dma-mapping: factor out dummy DMA ops
  dma-mapping: always build the direct mapping code
  dma-mapping: move dma_cache_sync out of line
  dma-mapping: move various slow path functions out of line
  ...
2018-12-28 14:12:21 -08:00
Christoph Hellwig 518a2f1925 dma-mapping: zero memory returned from dma_alloc_*
If we want to map memory from the DMA allocator to userspace it must be
zeroed at allocation time to prevent stale data leaks.   We already do
this on most common architectures, but some architectures don't do this
yet, fix them up, either by passing GFP_ZERO when we use the normal page
allocator or doing a manual memset otherwise.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Sam Ravnborg <sam@ravnborg.org> [sparc]
2018-12-20 08:13:52 +01:00
Christoph Hellwig 356da6d0cd dma-mapping: bypass indirect calls for dma-direct
Avoid expensive indirect calls in the fast path DMA mapping
operations by directly calling the dma_direct_* ops if we are using
the directly mapped DMA operations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13 21:06:18 +01:00
Florian Fainelli 229c55ccb4 arch: Move initrd= parsing into do_mounts_initrd.c
ARC, ARM, ARM64 and Unicore32 are all capable of parsing the "initrd="
command line parameter to allow specifying the physical address and size
of an initrd. Move that parsing into init/do_mounts_initrd.c such that
we no longer duplicate that logic.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-26 15:50:45 -06:00
Eugeniy Paltsev 121e38e5ac ARC: mm: fix uninitialised signal code in do_page_fault
Commit 15773ae938 ("signal/arc: Use force_sig_fault where
appropriate") introduced undefined behaviour by leaving si_code
unitiailized and leaking random kernel values to user space.

Fixes: 15773ae938 ("signal/arc: Use force_sig_fault where appropriate")
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12 10:38:27 -08:00
Eugeniy Paltsev 3624379d90 ARC: IOC: panic if kernel was started with previously enabled IOC
If IOC was already enabled (due to bootloader) it technically needs to
be reconfigured with aperture base,size corresponding to Linux memory map
which will certainly be different than uboot's. But disabling and
reenabling IOC when DMA might be potentially active is tricky business.
To avoid random memory issues later, just panic here and ask user to
upgrade bootloader to one which doesn't enable IOC

This was actually seen as issue on some of the HSDK board with a version
of uboot which enabled IOC. There were random issues later with starting
of X or peripherals etc.

Also while I'm at it, replace hardcoded bits in ARC_REG_IO_COH_PARTIAL
and ARC_REG_IO_COH_ENABLE registers by definitions.

Inspired by: https://lkml.org/lkml/2018/1/19/557
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-11-12 10:38:27 -08:00
Mike Rapoport 57c8a661d9 mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport c6ffc5ca8f memblock: rename free_all_bootmem to memblock_free_all
The conversion is done using

sed -i 's@free_all_bootmem@memblock_free_all@' \
    $(git grep -l free_all_bootmem)

Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00