When flipping the polarity will be generated interrupt under certain
circumstances, but GPIO external signal has not changed.
Then, mask the interrupt before polarity setting, and clear the
unexpected interrupt after trigger type setting completed.
Remove mtk_eint_flip_edge: because mtk_eint_unmask already calls it.
Signed-off-by: Hailong Fan <hailong.fan@mediatek.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Link: https://lore.kernel.org/r/20210125041753.2214-1-hailong.fan@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
To improve human readability and enable automatic validation, the tuples
in "pinctrl-*" properties should be grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210204125718.1646082-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SAMA7G5 supports slew rate configuration. Adapt the driver for this.
For output switching frequencies lower than 50MHz the slew rate needs to
be enabled. Since most of the pins on SAMA7G5 fall into this category
enabled the slew rate by default.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/1611747945-29960-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I happened to apply the v1 of the patch restriction the
selection to ARM or ARM64, sorry for my sloppiness.
Fixing up the mistake as I can't back the patch out now.
Fixes: 5784921f7b ("pinctrl: actions: Add the platform dependency to drivers")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pcs_add_function() fails to set the function name in struct pcs_function
when adding a new function. As a result this line in pcs_set_mux():
dev_dbg(pcs->dev, "enabling %s function%i\n",
func->name, fselector);
prints "(null)" for the function:
pinctrl-single 44e10800.pinmux: enabling (null) function0
pinctrl-single 44e10800.pinmux: enabling (null) function1
pinctrl-single 44e10800.pinmux: enabling (null) function2
pinctrl-single 44e10800.pinmux: enabling (null) function3
With this fix, the output is now:
pinctrl-single 44e10800.pinmux: enabling pinmux-uart0-pins function0
pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function1
pinctrl-single 44e10800.pinmux: enabling pinmux-i2c0-pins function2
pinctrl-single 44e10800.pinmux: enabling pinmux-mmc0-pins function3
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Robert Nelson <robertcnelson@beagleboard.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210125203542.51513-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl driver for the sc8180x TLMM block.
A noteworthy difference from previous TLMM blocks is that the registers
for GPIO 177 through 189 are for some reason offset from the typical
layout. Other than that the driver is same old...
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210126042650.1725176-3-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Several properties are shared between all TLMM bindings. By providing a
common binding to define these properties each platform's binding can be
reduced to just listing which of these properties should be checked for
- or further specified.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210126042650.1725176-1-bjorn.andersson@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds pincontrol driver for tlmm block found in SM8350 SoC
This patch is based on initial code downstream by Raghavendra.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210205140132.274242-3-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert spin_[lock|unlock] functions of pin bank to
raw_spinlock to support preempt-rt for pinctrl-s3c64xx. Below patch
converted spinlock_t to raw_spinlock_t but it didn't convert the
s3c64xx's spinlock.
Fixes: 1f306ecbe0 ("pinctrl: samsung: use raw_spinlock for locking")
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20210127001631.91209-1-chanho61.park@samsung.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Silence indentation level warning reported by dt_binding_check in
order to reduce noise during routine checks.
$ make dt_binding_check
mt8192-mt6359-rt1015-rt5682.yaml:10:4: [warning] wrong indentation:
expected 2 but found 3 (indentation)
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210126132531.2084711-2-robert.foss@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Enable pin control on Intel Alder Lake-P
* Traverse through capabilities, convert them to features for the future use
The following is an automated git shortlog grouped by driver:
intel:
- Convert capability list to features
- Drop unnecessary check for predefined features
- Split intel_pinctrl_add_padgroups() for better maintenance
tigerlake:
- Add Alder Lake-P ACPI ID
-----BEGIN PGP SIGNATURE-----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=9BMa
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.12-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.12-1
* Enable pin control on Intel Alder Lake-P
* Traverse through capabilities, convert them to features for the future use
The following is an automated git shortlog grouped by driver:
intel:
- Convert capability list to features
- Drop unnecessary check for predefined features
- Split intel_pinctrl_add_padgroups() for better maintenance
tigerlake:
- Add Alder Lake-P ACPI ID
Add the function selector to the pinmux-functions debugfs output. This
is an integer which is the index into the pinmux function tree. It will
make it easier to correlate function name to function selector without
having to count the lines in the output.
Example output of "pinmux-functions":
function 0: pinmux-uart0-pins, groups = [ pinmux-uart0-pins ]
function 1: pinmux-uart1-pins, groups = [ pinmux-uart1-pins ]
function 2: pinmux-uart2-pins, groups = [ pinmux-uart2-pins ]
function 3: pinmux-mmc0-pins, groups = [ pinmux-mmc0-pins ]
function 3: pinmux-mmc1-pins, groups = [ pinmux-mmc1-pins ]
function 5: pinmux-i2c0-pins, groups = [ pinmux-i2c0-pins ]
function 6: pinmux-i2c1-pins, groups = [ pinmux-i2c1-pins ]
function 7: pinmux-i2c2-pins, groups = [ pinmux-i2c2-pins ]
function 8: pinmux-pwm0-pins, groups = [ pinmux-pwm0-pins ]
function 9: pinmux-pwm1-pins, groups = [ pinmux-pwm1-pins ]
function 10: pinmux-adc-pins, groups = [ pinmux-adc-pins ]
Cc: Jason Kridner <jkridner@beagleboard.org>
Cc: Robert Nelson <robertcnelson@beagleboard.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210123202212.528046-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch converts spin_[lock|unlock] functions of pin bank to
raw_spinlock to support preempt-rt. This can avoid BUG() assertion when
irqchip callbacks are triggerred. Spinlocks can be converted rt_mutex
which is preemptible when we apply preempt-rt patches.
According to "Documentation/driver-api/gpio/driver.rst",
"Realtime considerations: a realtime compliant GPIO driver should not
use spinlock_t or any sleepable APIs (like PM runtime) as part of its
irqchip implementation.
- spinlock_t should be replaced with raw_spinlock_t.[1]
"
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210121030009.25673-1-chanho61.park@samsung.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Actions Semi pinctrl drivers are a mix of both ARM32 and ARM64
platforms. So let's add the correct platform dependency to avoid them
being selected on the other.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210121062547.27173-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are only two pins left now, used to connect to the PMIC via I2C.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20210118020848.11721-6-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Port A is used for an internal connection to some analogue circuitry
which looks like an AC200 IP (as in the H6), though this is not
mentioned in the manual.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20210118020848.11721-5-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A new SoC, a new compatible string.
Also we were too miserly with just allowing seven interrupt banks.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20210118020848.11721-4-andre.przywara@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add otg function and otg-vbus group.
- Add lcd-8bit, lcd-16bit, lcd-18bit, lcd-generic and lcd-special
groups. Change the lcd-24bit group so that it only selects the pins
that aren't in the lcd-18bit and lcd-generic groups (which breaks
Device Tree in theory, but there is none out there for any JZ4760
based board, yet). Remove the lcd-no-pins group which is just useless.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210120110722.20133-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-5-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120132045.2127659-3-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested on a JZ4740 system (ARCH=mips make qi_lb60_defconfig), this saves
about 14 KiB, by allowing the compiler to garbage-collect all the
functions and tables that correspond to SoCs that were disabled in the
config.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201213235447.138271-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
IF_ENABLED(CONFIG_FOO, ptr) evaluates to (ptr) if CONFIG_FOO is set to 'y'
or 'm', NULL otherwise. The (ptr) argument must be a pointer.
The IF_ENABLED() macro can be very useful to help GCC drop dead code.
For instance, consider the following:
#ifdef CONFIG_FOO_SUSPEND
static int foo_suspend(struct device *dev)
{
...
}
#endif
static struct pm_ops foo_ops = {
#ifdef CONFIG_FOO_SUSPEND
.suspend = foo_suspend,
#endif
};
While this works, the foo_suspend() macro is compiled conditionally,
only when CONFIG_FOO_SUSPEND is set. This is problematic, as there could
be a build bug in this function, we wouldn't have a way to know unless
the config option is set.
An alternative is to declare foo_suspend() always, but mark it as maybe
unused:
static int __maybe_unused foo_suspend(struct device *dev)
{
...
}
static struct pm_ops foo_ops = {
#ifdef CONFIG_FOO_SUSPEND
.suspend = foo_suspend,
#endif
};
Again, this works, but the __maybe_unused attribute is required to
instruct the compiler that the function may not be referenced anywhere,
and is safe to remove without making a fuss about it. This makes the
programmer responsible for tagging the functions that can be
garbage-collected.
With this patch, it is now possible to write the following:
static int foo_suspend(struct device *dev)
{
...
}
static struct pm_ops foo_ops = {
.suspend = IF_ENABLED(CONFIG_FOO_SUSPEND, foo_suspend),
};
The foo_suspend() function will now be automatically dropped by the
compiler, and it does not require any specific attribute.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201213235447.138271-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Restrict debug runtime-checks to Renesas platforms,
- Initial support for the R-Car V3U SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYAFgRQAKCRCKwlD9ZEnx
cEWIAP40TrUerqfnQgJ7iNYLh9WfSk48w9Gxzm92E7FanXaJBAD/dmkieXwQBBig
zKNuoWL2ZlK7O5MMkzpNnhLNS95SEQs=
=vIxg
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.12
- Restrict debug runtime-checks to Renesas platforms,
- Initial support for the R-Car V3U SoC.
Fix the following coccicheck warning:
./drivers/pinctrl/sprd/pinctrl-sprd.c:690:8-23: WARNING: Comparison to
bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/1610440080-68600-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pins, groups and functions for the 16-Bit Timer Pulse Unit outputs
on the R-Car R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20210112165929.31002-13-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add pins, groups, and function for the Interrupt Controller for External
Devices (INTC-EX) on the R-Car R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20210112165929.31002-7-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds HSCIF0-3 pins, groups and functions to the R8A779A0
(V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165929.31002-6-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds groups and function for AVB PHY, LINK, MAGIC, RGMII and
PTP pins for the R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165929.31002-3-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds I2C0-6 pins, groups and functions to the R8A779A0 (V3U)
SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165929.31002-2-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds SCIF0, 1, 3 and 4 pins, groups and functions for the
R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210112165912.30876-6-uli+renesas@fpond.eu
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Hailong Fan
Geert Uytterhoeven
Jonathan Neuschäfer
Claudiu Beznea
Linus Walleij
Drew Fustini
Bjorn Andersson
Vinod Koul
Chanho Park
Robert Foss
Konrad Dybcio
Manivannan Sadhasivam
Andre Przywara
Paul Cercueil
Arnd Bergmann
Jiapeng Zhong
Souptick Joarder
Ulrich Hecht