Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Dinh Nguyen 0adf882b68 ARM: mx51: Implement code to allow mx51 to enter WFI
Implement code for MX51 that allows the SoC to enter WFI when
arch_idle is called.

This patch is also necessary for correctly suspending the system.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-23 15:08:15 +01:00
Arnaud Patard (Rtp) 102c91d8c6 mx51: add support for efika smartbook
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18 10:56:40 +01:00
Arnaud Patard (Rtp) 7ac18a3845 Introduce EFIKA_COMMON
The Genesi EFIKA MX and EFIKA Smartbook are sharing a lot of things
so it makes sense to create a common file for both devices and a specific
file for each. No functionnal change except dropping uart 1 & 2.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18 10:56:38 +01:00
Sascha Hauer cb07625d1f ARM i.MX ehci: factor out soc specific functions
Currently we have a mxc_initialize_usb_hw which is called on every
i.MX SoC. This function dispatches the different SoC types, which
is quite ugly. This patch moves the SoC specific USB initialization
to their correspondive mach directories.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11 08:34:17 +01:00
Yong Shen 3b18c34928 ARM i.MX53 enable LOCO board bootup
1. Add Kconfig and Makefile entries
2. Add board definition
3. enable uart and fec for LOCO board

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:49 +01:00
Yong Shen 6f12ea4e54 ARM i.MX53 enable SMD board bootup
1. Add Kconfig and Makefile entries
2. Add board definition
3. enable uart and fec for SMD board

Signed-off-by: Yong Shen <yong.shen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13 10:02:49 +01:00
Yong Shen a58154d1c3 ARM i.MX53: Make MX53 EVK bootable
1. Add entries to Kconfig
2. Add machine definition
3. Add Uart platform data, pad setting and base address
4. Adjust GPIO irq number

Signed-off-by: Yong Shen <yong.shen@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-04 12:00:23 +01:00
Richard Zhao d3d4b60b12 arm: mx50: add mx50 reference design board support
Add basic function and uart device support.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 09:39:30 +01:00
Richard Zhao 3d5a44be30 arm: mx50: add core functions support except clock
Add core definitions and memory map, gpio, irq, iomux, uart device
support.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-03 09:39:29 +01:00
Dinh Nguyen c0abefd30b ARM: imx: Add core definitions for MX53
Add iomux, clocks,  and memory map for Freescale's MX53 SoC.
Add cpu_is_mx53 function to common.h.
Add 3 more banks of gpio's to mxc_gpio_ports.
Add MX53 phys offset address.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 10:09:04 +01:00
Yong Shen 64f102b67f cpufreq for freescale mx51
Currently, only two operating points: 160Mhz and 800Mhz.
the operating points are tested on babbage 3.0

Signed-off-by: Yong Shen <yong.shen@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-22 08:24:14 +02:00
Eric Bénard 70b1726820 mx5: add cpuimx51sd module and its baseboard
Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19 18:45:00 +02:00
Amit Kucheria 088d01b00e mx51: add support for genesi efikamx nettop
Get serial port working for now

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11 16:29:17 +02:00
Eric Bénard ef93f1443c i.MX51: add support for cpuimx51 module and its baseboard
CPUIMX51 is build around Freescale's i.MX515 and has up to
512MB of RAM, NAND Flash, Ethernet, USB Host with 4 ports
hub, USB OTG, ST16554 Quad UART on nCS1, I2C RTC ...

MBIMX51 adds LEDS, Keypad, TSC2007 touchscreen controler ...

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:37 +02:00
Jason Wang beaac6f32c mx51_3ds: Add support for the imx51 3-stack board
3-stack is a reference board from Freescale for their i.MX51 SoC.

Add board definition, Kconfig and Makefile to enable Freescale 3-stack
board.

Boot tested on a i.MX51 3-stack Rev2.0 board

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 14:29:20 +02:00
Amit Kucheria b996b58303 mxc: Add support for the Babbage board (i.MX5)
Babbage is a reference board from Freescale for their i.MX51 SoC.

Add board definition, Kconfig and Makefiles to enable Freescale i.MX51
processor and Babbage board.

Boot tested on a Babbage2.5 board

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09 18:32:17 +02:00