Граф коммитов

2751 Коммитов

Автор SHA1 Сообщение Дата
David Howells eee045021f KEYS: Only apply KEY_FLAG_KEEP to a key if a parent keyring has it set
KEY_FLAG_KEEP should only be applied to a key if the keyring it is being
linked into has KEY_FLAG_KEEP set.

To this end, partially revert the following patch:

	commit 1d6d167c2e
	Author: Mimi Zohar <zohar@linux.vnet.ibm.com>
	Date:   Thu Jan 7 07:46:36 2016 -0500
	KEYS: refcount bug fix

to undo the change that made it unconditional (Mimi got it right the first
time).

Without undoing this change, it becomes impossible to delete, revoke or
invalidate keys added to keyrings through __key_instantiate_and_link()
where the keyring has itself been linked to.  To test this, run the
following command sequence:

    keyctl newring foo @s
    keyctl add user a a %:foo
    keyctl unlink %user:a %:foo
    keyctl clear %:foo

With the commit mentioned above the third and fourth commands fail with
EPERM when they should succeed.

Reported-by: Stephen Gallager <sgallagh@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by:  Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: keyrings@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-01-28 10:48:40 +11:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Jann Horn caaee6234d ptrace: use fsuid, fsgid, effective creds for fs access checks
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.

To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.

The problem was that when a privileged task had temporarily dropped its
privileges, e.g.  by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.

While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.

In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:

 /proc/$pid/stat - uses the check for determining whether pointers
     should be visible, useful for bypassing ASLR
 /proc/$pid/maps - also useful for bypassing ASLR
 /proc/$pid/cwd - useful for gaining access to restricted
     directories that contain files with lax permissions, e.g. in
     this scenario:
     lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
     drwx------ root root /root
     drwxr-xr-x root root /root/foobar
     -rw-r--r-- root root /root/foobar/secret

Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Jann Horn 3dfb7d8cdb security: let security modules use PTRACE_MODE_* with bitmasks
It looks like smack and yama weren't aware that the ptrace mode
can have flags ORed into it - PTRACE_MODE_NOAUDIT until now, but
only for /proc/$pid/stat, and with the PTRACE_MODE_*CREDS patch,
all modes have flags ORed into them.

Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Yevgeny Pats 23567fd052 KEYS: Fix keyring ref leak in join_session_keyring()
This fixes CVE-2016-0728.

If a thread is asked to join as a session keyring the keyring that's already
set as its session, we leak a keyring reference.

This can be tested with the following program:

	#include <stddef.h>
	#include <stdio.h>
	#include <sys/types.h>
	#include <keyutils.h>

	int main(int argc, const char *argv[])
	{
		int i = 0;
		key_serial_t serial;

		serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
				"leaked-keyring");
		if (serial < 0) {
			perror("keyctl");
			return -1;
		}

		if (keyctl(KEYCTL_SETPERM, serial,
			   KEY_POS_ALL | KEY_USR_ALL) < 0) {
			perror("keyctl");
			return -1;
		}

		for (i = 0; i < 100; i++) {
			serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
					"leaked-keyring");
			if (serial < 0) {
				perror("keyctl");
				return -1;
			}
		}

		return 0;
	}

If, after the program has run, there something like the following line in
/proc/keys:

3f3d898f I--Q---   100 perm 3f3f0000     0     0 keyring   leaked-keyring: empty

with a usage count of 100 * the number of times the program has been run,
then the kernel is malfunctioning.  If leaked-keyring has zero usages or
has been garbage collected, then the problem is fixed.

Reported-by: Yevgeny Pats <yevgeny@perception-point.io>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-01-20 10:50:48 +11:00
Linus Torvalds 5807fcaa9b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:

 - EVM gains support for loading an x509 cert from the kernel
   (EVM_LOAD_X509), into the EVM trusted kernel keyring.

 - Smack implements 'file receive' process-based permission checking for
   sockets, rather than just depending on inode checks.

 - Misc enhancments for TPM & TPM2.

 - Cleanups and bugfixes for SELinux, Keys, and IMA.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
  selinux: Inode label revalidation performance fix
  KEYS: refcount bug fix
  ima: ima_write_policy() limit locking
  IMA: policy can be updated zero times
  selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
  selinux: export validatetrans decisions
  gfs2: Invalid security labels of inodes when they go invalid
  selinux: Revalidate invalid inode security labels
  security: Add hook to invalidate inode security labels
  selinux: Add accessor functions for inode->i_security
  security: Make inode argument of inode_getsecid non-const
  security: Make inode argument of inode_getsecurity non-const
  selinux: Remove unused variable in selinux_inode_init_security
  keys, trusted: seal with a TPM2 authorization policy
  keys, trusted: select hash algorithm for TPM2 chips
  keys, trusted: fix: *do not* allow duplicate key options
  tpm_ibmvtpm: properly handle interrupted packet receptions
  tpm_tis: Tighten IRQ auto-probing
  tpm_tis: Refactor the interrupt setup
  tpm_tis: Get rid of the duplicate IRQ probing code
  ...
2016-01-17 19:13:15 -08:00
James Morris acb2cfdb31 Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux into next 2016-01-14 12:11:58 +11:00
Linus Torvalds 33caf82acf Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "All kinds of stuff.  That probably should've been 5 or 6 separate
  branches, but by the time I'd realized how large and mixed that bag
  had become it had been too close to -final to play with rebasing.

  Some fs/namei.c cleanups there, memdup_user_nul() introduction and
  switching open-coded instances, burying long-dead code, whack-a-mole
  of various kinds, several new helpers for ->llseek(), assorted
  cleanups and fixes from various people, etc.

  One piece probably deserves special mention - Neil's
  lookup_one_len_unlocked().  Similar to lookup_one_len(), but gets
  called without ->i_mutex and tries to avoid ever taking it.  That, of
  course, means that it's not useful for any directory modifications,
  but things like getting inode attributes in nfds readdirplus are fine
  with that.  I really should've asked for moratorium on lookup-related
  changes this cycle, but since I hadn't done that early enough...  I
  *am* asking for that for the coming cycle, though - I'm going to try
  and get conversion of i_mutex to rwsem with ->lookup() done under lock
  taken shared.

  There will be a patch closer to the end of the window, along the lines
  of the one Linus had posted last May - mechanical conversion of
  ->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
  inode_is_locked()/inode_lock_nested().  To quote Linus back then:

    -----
    |    This is an automated patch using
    |
    |        sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
    |        sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
    |        sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[     ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
    |        sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
    |        sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
    |
    |    with a very few manual fixups
    -----

  I'm going to send that once the ->i_mutex-affecting stuff in -next
  gets mostly merged (or when Linus says he's about to stop taking
  merges)"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  nfsd: don't hold i_mutex over userspace upcalls
  fs:affs:Replace time_t with time64_t
  fs/9p: use fscache mutex rather than spinlock
  proc: add a reschedule point in proc_readfd_common()
  logfs: constify logfs_block_ops structures
  fcntl: allow to set O_DIRECT flag on pipe
  fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
  fs: xattr: Use kvfree()
  [s390] page_to_phys() always returns a multiple of PAGE_SIZE
  nbd: use ->compat_ioctl()
  fs: use block_device name vsprintf helper
  lib/vsprintf: add %*pg format specifier
  fs: use gendisk->disk_name where possible
  poll: plug an unused argument to do_poll
  amdkfd: don't open-code memdup_user()
  cdrom: don't open-code memdup_user()
  rsxx: don't open-code memdup_user()
  mtip32xx: don't open-code memdup_user()
  [um] mconsole: don't open-code memdup_user_nul()
  [um] hostaudio: don't open-code memdup_user()
  ...
2016-01-12 17:11:47 -08:00
Linus Torvalds ddf1d6238d Merge branch 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
 "Andreas' xattr cleanup series.

  It's a followup to his xattr work that went in last cycle; -0.5KLoC"

* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  xattr handlers: Simplify list operation
  ocfs2: Replace list xattr handler operations
  nfs: Move call to security_inode_listsecurity into nfs_listxattr
  xfs: Change how listxattr generates synthetic attributes
  tmpfs: listxattr should include POSIX ACL xattrs
  tmpfs: Use xattr handler infrastructure
  btrfs: Use xattr handler infrastructure
  vfs: Distinguish between full xattr names and proper prefixes
  posix acls: Remove duplicate xattr name definitions
  gfs2: Remove gfs2_xattr_acl_chmod
  vfs: Remove vfs_xattr_cmp
2016-01-11 13:32:10 -08:00
James Morris 607259e17b Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into ra-next 2016-01-10 21:52:17 +11:00
Al Viro 6108209c4a Merge branch 'for-linus' into work.misc 2016-01-08 21:20:11 -05:00
Andreas Gruenbacher b197367ed1 selinux: Inode label revalidation performance fix
Commit 5d226df4 has introduced a performance regression of about
10% in the UnixBench pipe benchmark.  It turns out that the call
to inode_security in selinux_file_permission can be moved below
the zero-mask test and that inode_security_revalidate can be
removed entirely, which brings us back to roughly the original
performance.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-01-08 16:24:27 -05:00
Mimi Zohar 1d6d167c2e KEYS: refcount bug fix
This patch fixes the key_ref leak, removes the unnecessary KEY_FLAG_KEEP
test before setting the flag, and cleans up the if/then brackets style
introduced in commit:
d3600bc KEYS: prevent keys from being removed from specified keyrings

Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
2016-01-07 12:56:42 -05:00
Al Viro cc4e719e83 fix the leak in integrity_read_file()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:28:19 -05:00
Al Viro 8365a71946 selinuxfs: switch to memdup_user_nul()
Nothing in there gives a damn about the buffer alignment - it
just parses its contents.  So the use of get_zeroed_page()
doesn't buy us anything - might as well had been kmalloc(),
which makes that code equivalent to open-coded memdup_user_nul()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:27:39 -05:00
Al Viro 16e5c1fc36 convert a bunch of open-coded instances of memdup_user_nul()
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-04 10:26:58 -05:00
Petko Manolov 6427e6c71c ima: ima_write_policy() limit locking
There is no need to hold the ima_write_mutex for so long.  We only need it
around ima_parse_add_rule().

Changelog:
- The return path now takes into account failed kmalloc() call.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-01-03 13:22:38 -05:00
James Morris aa98b942cb Merge branch 'smack-for-4.5' of https://github.com/cschaufler/smack-next into next 2015-12-26 16:11:13 +11:00
James Morris 37babe4ec6 Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux into next 2015-12-26 16:07:31 +11:00
James Morris 3cb92fe481 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next 2015-12-26 16:06:53 +11:00
Sasha Levin 0112721df4 IMA: policy can be updated zero times
Commit "IMA: policy can now be updated multiple times" assumed that the
policy would be updated at least once.

If there are zero updates, the temporary list head object will get added
to the policy list, and later dereferenced as an IMA policy object, which
means that invalid memory will be accessed.

Changelog:
- Move list_empty() test to ima_release_policy(), before audit msg - Mimi

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-24 18:56:45 -05:00
Vladis Dronov 76319946f3 selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
Any process is able to send netlink messages with invalid types.
Make the warning rate-limited to prevent too much log spam.

The warning is supposed to help to find misbehaving programs, so
print the triggering command name and pid.

Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
[PM: subject line tweak to make checkpatch.pl happy]
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:41 -05:00
Andrew Perepechko f9df645821 selinux: export validatetrans decisions
Make validatetrans decisions available through selinuxfs.
"/validatetrans" is added to selinuxfs for this purpose.
This functionality is needed by file system servers
implemented in userspace or kernelspace without the VFS
layer.

Writing "$oldcontext $newcontext $tclass $taskcontext"
to /validatetrans is expected to return 0 if the transition
is allowed and -EPERM otherwise.

Signed-off-by: Andrew Perepechko <anserper@ya.ru>
CC: andrew.perepechko@seagate.com
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:41 -05:00
Andreas Gruenbacher 5d226df4ed selinux: Revalidate invalid inode security labels
When fetching an inode's security label, check if it is still valid, and
try reloading it if it is not. Reloading will fail when we are in RCU
context which doesn't allow sleeping, or when we can't find a dentry for
the inode.  (Reloading happens via iop->getxattr which takes a dentry
parameter.)  When reloading fails, continue using the old, invalid
label.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:40 -05:00
Andreas Gruenbacher 6f3be9f562 security: Add hook to invalidate inode security labels
Add a hook to invalidate an inode's security label when the cached
information becomes invalid.

Add the new hook in selinux: set a flag when a security label becomes
invalid.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:40 -05:00
Andreas Gruenbacher 83da53c5a3 selinux: Add accessor functions for inode->i_security
Add functions dentry_security and inode_security for accessing
inode->i_security.  These functions initially don't do much, but they
will later be used to revalidate the security labels when necessary.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:39 -05:00
Andreas Gruenbacher d6335d77a7 security: Make inode argument of inode_getsecid non-const
Make the inode argument of the inode_getsecid hook non-const so that we
can use it to revalidate invalid security labels.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:39 -05:00
Andreas Gruenbacher ea861dfd9e security: Make inode argument of inode_getsecurity non-const
Make the inode argument of the inode_getsecurity hook non-const so that
we can use it to revalidate invalid security labels.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:39 -05:00
Andreas Gruenbacher a44ca52ca6 selinux: Remove unused variable in selinux_inode_init_security
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-12-24 11:09:39 -05:00
Jarkko Sakkinen 5beb0c435b keys, trusted: seal with a TPM2 authorization policy
TPM2 supports authorization policies, which are essentially
combinational logic statements repsenting the conditions where the data
can be unsealed based on the TPM state. This patch enables to use
authorization policies to seal trusted keys.

Two following new options have been added for trusted keys:

* 'policydigest=': provide an auth policy digest for sealing.
* 'policyhandle=': provide a policy session handle for unsealing.

If 'hash=' option is supplied after 'policydigest=' option, this
will result an error because the state of the option would become
mixed.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
2015-12-20 15:27:13 +02:00
Jarkko Sakkinen 5ca4c20cfd keys, trusted: select hash algorithm for TPM2 chips
Added 'hash=' option for selecting the hash algorithm for add_key()
syscall and documentation for it.

Added entry for sm3-256 to the following tables in order to support
TPM_ALG_SM3_256:

* hash_algo_name
* hash_digest_size

Includes support for the following hash algorithms:

* sha1
* sha256
* sha384
* sha512
* sm3-256

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
2015-12-20 15:27:12 +02:00
Jarkko Sakkinen 5208cc8342 keys, trusted: fix: *do not* allow duplicate key options
The trusted keys option parsing allows specifying the same option
multiple times. The last option value specified is used.

This is problematic because:

* No gain.
* This makes complicated to specify options that are dependent on other
  options.

This patch changes the behavior in a way that option can be specified
only once.

Reported-by: James Morris James Morris <jmorris@namei.org>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
2015-12-20 15:27:12 +02:00
David Howells b4a1b4f504 KEYS: Fix race between read and revoke
This fixes CVE-2015-7550.

There's a race between keyctl_read() and keyctl_revoke().  If the revoke
happens between keyctl_read() checking the validity of a key and the key's
semaphore being taken, then the key type read method will see a revoked key.

This causes a problem for the user-defined key type because it assumes in
its read method that there will always be a payload in a non-revoked key
and doesn't check for a NULL pointer.

Fix this by making keyctl_read() check the validity of a key after taking
semaphore instead of before.

I think the bug was introduced with the original keyrings code.

This was discovered by a multithreaded test program generated by syzkaller
(http://github.com/google/syzkaller).  Here's a cleaned up version:

	#include <sys/types.h>
	#include <keyutils.h>
	#include <pthread.h>
	void *thr0(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		keyctl_revoke(key);
		return 0;
	}
	void *thr1(void *arg)
	{
		key_serial_t key = (unsigned long)arg;
		char buffer[16];
		keyctl_read(key, buffer, 16);
		return 0;
	}
	int main()
	{
		key_serial_t key = add_key("user", "%", "foo", 3, KEY_SPEC_USER_KEYRING);
		pthread_t th[5];
		pthread_create(&th[0], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[1], 0, thr1, (void *)(unsigned long)key);
		pthread_create(&th[2], 0, thr0, (void *)(unsigned long)key);
		pthread_create(&th[3], 0, thr1, (void *)(unsigned long)key);
		pthread_join(th[0], 0);
		pthread_join(th[1], 0);
		pthread_join(th[2], 0);
		pthread_join(th[3], 0);
		return 0;
	}

Build as:

	cc -o keyctl-race keyctl-race.c -lkeyutils -lpthread

Run as:

	while keyctl-race; do :; done

as it may need several iterations to crash the kernel.  The crash can be
summarised as:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
	IP: [<ffffffff81279b08>] user_read+0x56/0xa3
	...
	Call Trace:
	 [<ffffffff81276aa9>] keyctl_read_key+0xb6/0xd7
	 [<ffffffff81277815>] SyS_keyctl+0x83/0xe0
	 [<ffffffff815dbb97>] entry_SYSCALL_64_fastpath+0x12/0x6f

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-12-19 12:34:43 +11:00
Roman Kubiak 81bd0d5629 Smack: type confusion in smak sendmsg() handler
Smack security handler for sendmsg() syscall
is vulnerable to type confusion issue what
can allow to privilege escalation into root
or cause denial of service.

A malicious attacker can create socket of one
type for example AF_UNIX and pass is into
sendmsg() function ensuring that this is
AF_INET socket.

Remedy
Do not trust user supplied data.
Proposed fix below.

Signed-off-by: Roman Kubiak <r.kubiak@samsung.com>
Signed-off-by: Mateusz Fruba <m.fruba@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
2015-12-17 10:21:56 -08:00
Paul Gortmaker 92cc916638 security/integrity: make ima/ima_mok.c explicitly non-modular
The Kconfig currently controlling compilation of this code is:

ima/Kconfig:config IMA_MOK_KEYRING
ima/Kconfig: bool "Create IMA machine owner keys (MOK) and blacklist keyrings"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple of traces of modularity so that when reading the
driver there is no doubt it really is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.

Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-ima-devel@lists.sourceforge.net
Cc: linux-ima-user@lists.sourceforge.net
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 10:01:43 -05:00
Mimi Zohar 6ad6afa146 ima: update appraise flags after policy update completes
While creating a temporary list of new rules, the ima_appraise flag is
updated, but not reverted on failure to append the new rules to the
existing policy.  This patch defines temp_ima_appraise flag.  Only when
the new rules are appended to the policy is the flag updated.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
2015-12-15 10:01:43 -05:00
Mimi Zohar 501f1bde66 IMA: prevent keys on the .ima_blacklist from being removed
Set the KEY_FLAGS_KEEP on the .ima_blacklist to prevent userspace
from removing keys from the keyring.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 10:01:43 -05:00
Mimi Zohar d3600bcf9d KEYS: prevent keys from being removed from specified keyrings
Userspace should not be allowed to remove keys from certain keyrings
(eg. blacklist), though the keys themselves can expire.

This patch defines a new key flag named KEY_FLAG_KEEP to prevent
userspace from being able to unlink, revoke, invalidate or timed
out a key on a keyring.  When this flag is set on the keyring, all
keys subsequently added are flagged.

In addition, when this flag is set, the keyring itself can not be
cleared.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
2015-12-15 10:01:43 -05:00
Petko Manolov 80eae209d6 IMA: allow reading back the current IMA policy
It is often useful to be able to read back the IMA policy.  It is
even more important after introducing CONFIG_IMA_WRITE_POLICY.
This option allows the root user to see the current policy rules.

Signed-off-by: Zbigniew Jasinski <z.jasinski@samsung.com>
Signed-off-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 10:01:43 -05:00
Petko Manolov 41c89b64d7 IMA: create machine owner and blacklist keyrings
This option creates IMA MOK and blacklist keyrings.  IMA MOK is an
intermediate keyring that sits between .system and .ima keyrings,
effectively forming a simple CA hierarchy.  To successfully import a key
into .ima_mok it must be signed by a key which CA is in .system keyring.
On turn any key that needs to go in .ima keyring must be signed by CA in
either .system or .ima_mok keyrings. IMA MOK is empty at kernel boot.

IMA blacklist keyring contains all revoked IMA keys.  It is consulted
before any other keyring.  If the search is successful the requested
operation is rejected and error is returned to the caller.

Signed-off-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 10:01:43 -05:00
Petko Manolov 38d859f991 IMA: policy can now be updated multiple times
The new rules get appended to the original policy, forming a queue.
The new rules are first added to a temporary list, which on error
get released without disturbing the normal IMA operations.  On
success both lists (the current policy and the new rules) are spliced.

IMA policy reads are many orders of magnitude more numerous compared to
writes, the match code is RCU protected.  The updater side also does
list splice in RCU manner.

Signed-off-by: Petko Manolov <petkan@mip-labs.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 10:01:43 -05:00
Arnd Bergmann 05d3884b1e evm: EVM_LOAD_X509 depends on EVM
The newly added EVM_LOAD_X509 code can be configured even if
CONFIG_EVM is disabled, but that causes a link error:

security/built-in.o: In function `integrity_load_keys':
digsig_asymmetric.c:(.init.text+0x400): undefined reference to `evm_load_x509'

This adds a Kconfig dependency to ensure it is only enabled when
CONFIG_EVM is set as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 2ce523eb89 ("evm: load x509 certificate from the kernel")
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 09:57:21 -05:00
Dmitry Kasatkin 523b74b16b evm: reset EVM status when file attributes change
The EVM verification status is cached in iint->evm_status and if it
was successful, never re-verified again when IMA passes the 'iint' to
evm_verifyxattr().

When file attributes or extended attributes change, we may wish to
re-verify EVM integrity as well.  For example, after setting a digital
signature we may need to re-verify the signature and update the
iint->flags that there is an EVM signature.

This patch enables that by resetting evm_status to INTEGRITY_UKNOWN
state.

Changes in v2:
* Flag setting moved to EVM layer

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 09:56:57 -05:00
Dmitry Kasatkin 7626676320 evm: provide a function to set the EVM key from the kernel
A crypto HW kernel module can possibly initialize the EVM key from the
kernel __init code to enable EVM before calling the 'init' process.
This patch provides a function evm_set_key() to set the EVM key
directly without using the KEY subsystem.

Changes in v4:
* kernel-doc style for evm_set_key

Changes in v3:
* error reporting moved to evm_set_key
* EVM_INIT_HMAC moved to evm_set_key
* added bitop to prevent key setting race

Changes in v2:
* use size_t for key size instead of signed int
* provide EVM_MAX_KEY_SIZE macro in <linux/evm.h>
* provide EVM_MIN_KEY_SIZE macro in <linux/evm.h>

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 08:53:36 -05:00
Dmitry Kasatkin 26ddabfe96 evm: enable EVM when X509 certificate is loaded
In order to enable EVM before starting the 'init' process,
evm_initialized needs to be non-zero.  Previously non-zero indicated
that the HMAC key was loaded.  When EVM loads the X509 before calling
'init', with this patch it is now possible to enable EVM to start
signature based verification.

This patch defines bits to enable EVM if a key of any type is loaded.

Changes in v3:
* print error message if key is not set

Changes in v2:
* EVM_STATE_KEY_SET replaced by EVM_INIT_HMAC
* EVM_STATE_X509_SET replaced by EVM_INIT_X509

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 08:50:48 -05:00
Dmitry Kasatkin 2ce523eb89 evm: load an x509 certificate from the kernel
This patch defines a configuration option and the evm_load_x509() hook
to load an X509 certificate onto the EVM trusted kernel keyring.

Changes in v4:
* Patch description updated

Changes in v3:
* Removed EVM_X509_PATH definition. CONFIG_EVM_X509_PATH is used
  directly.

Changes in v2:
* default key patch changed to /etc/keys

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-12-15 08:31:19 -05:00
Andreas Gruenbacher c4803c497f nfs: Move call to security_inode_listsecurity into nfs_listxattr
Add a nfs_listxattr operation.  Move the call to security_inode_listsecurity
from list operation of the "security.*" xattr handler to nfs_listxattr.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-13 19:45:47 -05:00
Casey Schaufler 79be093500 Smack: File receive for sockets
The existing file receive hook checks for access on
the file inode even for UDS. This is not right, as
the inode is not used by Smack to make access checks
for sockets. This change checks for an appropriate
access relationship between the receiving (current)
process and the socket. If the process can't write
to the socket's send label or the socket's receive
label can't write to the process fail.

This will allow the legitimate cases, where the
socket sender and socket receiver can freely communicate.
Only strangly set socket labels should cause a problem.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2015-12-09 16:10:55 -08:00
James Morris 6e37592900 Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/selinux into for-linus2 2015-11-26 15:04:19 +11:00
David Howells 096fe9eaea KEYS: Fix handling of stored error in a negatively instantiated user key
If a user key gets negatively instantiated, an error code is cached in the
payload area.  A negatively instantiated key may be then be positively
instantiated by updating it with valid data.  However, the ->update key
type method must be aware that the error code may be there.

The following may be used to trigger the bug in the user key type:

    keyctl request2 user user "" @u
    keyctl add user user "a" @u

which manifests itself as:

	BUG: unable to handle kernel paging request at 00000000ffffff8a
	IP: [<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
	PGD 7cc30067 PUD 0
	Oops: 0002 [#1] SMP
	Modules linked in:
	CPU: 3 PID: 2644 Comm: a.out Not tainted 4.3.0+ #49
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	task: ffff88003ddea700 ti: ffff88003dd88000 task.ti: ffff88003dd88000
	RIP: 0010:[<ffffffff810a376f>]  [<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280
	 [<ffffffff810a376f>] __call_rcu.constprop.76+0x1f/0x280 kernel/rcu/tree.c:3046
	RSP: 0018:ffff88003dd8bdb0  EFLAGS: 00010246
	RAX: 00000000ffffff82 RBX: 0000000000000000 RCX: 0000000000000001
	RDX: ffffffff81e3fe40 RSI: 0000000000000000 RDI: 00000000ffffff82
	RBP: ffff88003dd8bde0 R08: ffff88007d2d2da0 R09: 0000000000000000
	R10: 0000000000000000 R11: ffff88003e8073c0 R12: 00000000ffffff82
	R13: ffff88003dd8be68 R14: ffff88007d027600 R15: ffff88003ddea700
	FS:  0000000000b92880(0063) GS:ffff88007fd00000(0000) knlGS:0000000000000000
	CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
	CR2: 00000000ffffff8a CR3: 000000007cc5f000 CR4: 00000000000006e0
	Stack:
	 ffff88003dd8bdf0 ffffffff81160a8a 0000000000000000 00000000ffffff82
	 ffff88003dd8be68 ffff88007d027600 ffff88003dd8bdf0 ffffffff810a39e5
	 ffff88003dd8be20 ffffffff812a31ab ffff88007d027600 ffff88007d027620
	Call Trace:
	 [<ffffffff810a39e5>] kfree_call_rcu+0x15/0x20 kernel/rcu/tree.c:3136
	 [<ffffffff812a31ab>] user_update+0x8b/0xb0 security/keys/user_defined.c:129
	 [<     inline     >] __key_update security/keys/key.c:730
	 [<ffffffff8129e5c1>] key_create_or_update+0x291/0x440 security/keys/key.c:908
	 [<     inline     >] SYSC_add_key security/keys/keyctl.c:125
	 [<ffffffff8129fc21>] SyS_add_key+0x101/0x1e0 security/keys/keyctl.c:60
	 [<ffffffff8185f617>] entry_SYSCALL_64_fastpath+0x12/0x6a arch/x86/entry/entry_64.S:185

Note the error code (-ENOKEY) in EDX.

A similar bug can be tripped by:

    keyctl request2 trusted user "" @u
    keyctl add trusted user "a" @u

This should also affect encrypted keys - but that has to be correctly
parameterised or it will fail with EINVAL before getting to the bit that
will crashes.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-11-25 14:19:47 +11:00