Граф коммитов

329 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 2d8620cb88 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix waitqueue usage in hiddev
  HID: fix incorrect free in hiddev
2009-03-19 14:50:15 -07:00
Johannes Weiner 96fe2ab830 HID: fix waitqueue usage in hiddev
DECLARE_WAITQUEUE doesn't initialize the wait descriptor's task_list
to 'empty' but to zero.

prepare_to_wait() will not enqueue the descriptor to the waitqueue and
finish_wait() will do list_del_init() on a list head that contains
NULL pointers, which oopses.

This was introduced by 079034073 "HID: hiddev cleanup -- handle all
error conditions properly".

The prior code used an unconditional add_to_waitqueue() which didn't
care about the wait descriptor's list head and enqueued the thing
unconditionally.

The new code uses prepare_to_wait() which DOES check the prior list
state, so use DEFINE_WAIT instead.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-10 22:44:01 +01:00
Johannes Weiner 48e7a3c95c HID: fix incorrect free in hiddev
If hiddev_open() fails, it wrongly frees the shared hiddev structure
kept in hiddev_table instead of the hiddev_list structure allocated
for the opened file descriptor.  Existing references to this structure
will then accessed free memory.

This was introduced by 079034073 "HID: hiddev cleanup -- handle all
error conditions properly".

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-10 22:43:56 +01:00
Anssi Hannula daedb3d6a9 HID: move tmff and zpff devices from ignore_list to blacklist
The devices handled by hid-tmff and hid-zpff were added in the
hid_ignore_list[] instead of hid_blacklist[] in hid-core.c, thus
disabling them completely.

hid_ignore_list[] causes hid layer to skip the device, while
hid_blacklist[] indicates there is a specific driver in hid bus.

Re-enable the devices by moving them to the correct list.

Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-17 13:25:01 +01:00
Dan Carpenter dfd395aff4 HID: unlock properly on error paths in hidraw_ioctl()
We can't return immediately because lock_kernel() is held.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-17 13:25:01 +01:00
Michael Tokarev 35cfd1d964 HID: blacklist Powercom USB UPS
For quite some time users with various UPSes from Powercom were forced to play
magic with bind/unbind in /sys in order to be able to see the UPSes.  The
beasts does not work as HID devices, even if claims to do so.  cypress_m8
driver works with the devices instead, creating a normal serial port with which
normal UPS controlling software works.

The manufacturer confirmed the upcoming models with proper HID support will
have different device IDs.  In any way, it's wrong to have two completely
different modules for one device in kernel.

Blacklist the device in HID (add it to hid_ignore_list) to stop this mess,
finally.

Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-17 13:25:01 +01:00
Jiri Kosina bae7eb33b2 HID: document difference between hid_blacklist and hid_ignore_list
Many people get it wrong and add device IDs into hid_blacklist instead
of hid_ignore_list. Let's put a little comment in place.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-29 11:23:12 +01:00
Jarod Wilson 656f1fb90a HID: add antec-branded soundgraph imon devices to blacklist
hid_ignore_list additions for the Antec-branded SoundGraph iMon VFD and LCD
devices (0x15c2:0x0044 and 0x0045).

These devices are driven by lirc.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-29 11:23:12 +01:00
Oliver Neukum be5d0c837c HID: fix reversed logic in disconnect testing of hiddev
The logic for testing for disconnection is reversed in an ioctl leading
to false reports of disconnection.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Folkert van Heusden <folkert@vanheusden.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-29 11:23:12 +01:00
Jiri Kosina 0fb21de079 HID: adjust report descriptor fixup for MS 1028 receiver
Report descriptor fixup for MS 1028 receiver changes also values for
Keyboard and Consumer, which incorrectly trims the range, causing correct
events being thrown away before passing to userspace.

We need to keep the GenDesk usage fixup though, as it reports totally bogus
values about axis.

Reported-by: Lucas Gadani <lgadani@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-29 11:23:11 +01:00
Linus Torvalds 7c7758f99d Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits)
  wimax/i2400m: add CREDITS and MAINTAINERS entries
  wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install
  i2400m: Makefile and Kconfig
  i2400m/SDIO: TX and RX path backends
  i2400m/SDIO: firmware upload backend
  i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends
  i2400m/SDIO: header for the SDIO subdriver
  i2400m/USB: TX and RX path backends
  i2400m/USB: firmware upload backend
  i2400m/USB: probe/disconnect, dev init/shutdown and reset backends
  i2400m/USB: header for the USB bus driver
  i2400m: debugfs controls
  i2400m: various functions for device management
  i2400m: RX and TX data/control paths
  i2400m: firmware loading and bootrom initialization
  i2400m: linkage to the networking stack
  i2400m: Generic probe/disconnect, reset and message passing
  i2400m: host/device procotol and core driver definitions
  i2400m: documentation and instructions for usage
  wimax: Makefile, Kconfig and docbook linkage for the stack
  ...
2009-01-07 15:37:24 -08:00
Jiri Kosina 7605274914 HID: fix hid->hiddev initialization in hiddev_connect()
Commit 079034073f ("HID: hiddev cleanup -- handle all error conditions
properly") by mistake removed proper initialization of hid->hiddev pointer
in hiddev_connect() in case usb_register_dev() succeeds for the hiddev node.
Put it properly back in place.

Reported-and-tested-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 11:30:57 -08:00
Alan Stern 011b15df46 USB: change interface to usb_lock_device_for_reset()
This patch (as1161) changes the interface to
usb_lock_device_for_reset().  The existing interface is apparently not
very clear, judging from the fact that several of its callers don't
use it correctly.  The new interface always returns 0 for success and
it always requires the caller to unlock the device afterward.

The new routine will not return immediately if it is called while the
driver's probe method is running.  Instead it will wait until the
probe is over and the device has been unlocked.  This shouldn't cause
any problems; I don't know of any cases where drivers call
usb_lock_device_for_reset() during probe.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:52 -08:00
Jiri Kosina ed42350e02 Merge branch 'upstream-fixes' into for-next
Conflicts:

	drivers/hid/hid-ids.h
2009-01-04 01:04:09 +01:00
Jiri Kosina 4dfdc46468 HID: fix error condition propagation in hid-sony driver
sony_set_operational() only propagates return value from
usb_control_msg(), which returns negative on error and number
of transferred bytes otherwise.

Reported-by: Marcin Tolysz <tolysz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:01:43 +01:00
Oliver Neukum b8a832b1c0 HID: fix reference count leak hidraw
The hidraw subsystem has a bug that prevents the close syscall from ever
reaching the low level driver, leading to a resource leak. Fix by replacing
postdecrement with predecrement.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:01:43 +01:00
Matt Helsley 25e61613cf HID: add proper support for pensketch 12x9 tablet
The Genius PenSketch 12x9 tablet has a puck (labeled a
"Tablet Mouse") in addition to a pen. Without registering a quirk
the tablet appears to be a single input device that reports the
wrong axis information in /proc/bus/input/devices, and sends
incorrect events (e.g. ABS_Z instead of ABS_Y). This information
confuses the X evdev driver and makes the device impossible to
use.

The quirk fixes events and splits the device into multiple input
event devices so that at least the puck is useful.

Signed-off-by: Matt Helsley <matt.helsley@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:01:43 +01:00
Alexey Klimov 5f6108cf9b HID: don't allow DealExtreme usb-radio be handled by usb hid driver
This device is already handled by radio-si470x driver, and we therefore
want usbhid to ignore it.  Patch places usb ids of that device in
ignore section of hid-core.c

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:01:43 +01:00
Jiri Kosina 1db489b295 HID: fix default Kconfig setting for TopSpeed driver
Make default setting for TopSpeed driver compliant with the defaults
of the other specialized HID drivers.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:54 +01:00
Lev Babiev f14f526d02 HID: driver for TopSeed Cyberlink quirky remote
I recently picked up a Cyberlink branded remote control produced
by TopSeed Tech Corp. Alas, it appears that this device is using
non-standard mappings for some of it's keys (Usage page 0xffbc).

Signed-off-by: Lev Babiev <harley@hosers.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:53 +01:00
Parag Warudkar ac09952bab HID: make boot protocol drivers depend on EMBEDDED
The usbmouse and usbkbd modules are not supposed to be used with regular USB
mice and keyboards. Make them depend on EMBEDDED to prevent them from being
built and loaded on non-EMBEDDED configs.

Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:53 +01:00
Oliver Neukum 079034073f HID: hiddev cleanup -- handle all error conditions properly
This is a cleanup of hiddev and fixes the following issues:

- thread safety by locking in read & ioctl, introducing a per device mutex
- race between ioctl and disconnect, introducing a flag and locking
  in form of a per low level device mutex
- race between open and other methods, making sure only successfully
  opened devices are put on the list, changing order of events
- range checking both upper and lower limits of the minor range
- make sure further calls to open fail for unplugged devices even if
  the device still has opened files
- error checking for low level open
- possible loss of wakeup events, using standard waiting macros
- race in initialisation by moving registration after full initialisation

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:53 +01:00
Lukasz Lubojanski 42859e0bd2 HID: force feedback driver for GreenAsia 0x12 PID
I have implemented Force Feedback driver for another "GreeAsia" based device
(0e8f:0012 "GreenAsia Inc. USB Joystick"). The functionality was tested with
MANTA Warior MM816 and SpeedLink Strike2 SL-6635 and fftest software -
everything seems to work right.

Signed-off-by: Lukasz Lubojanski <lukasz@lubojanski.info>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:53 +01:00
David Brownell d04b431e3d HID: switch specialized drivers from "default y" to !EMBEDDED
Fix the obnoxious "default y" for all the "special" HID code, which forces folk
with EMBEDDED defined to manually override that inappropriate default for
almost 20 choices.  The general policy is against "default y"; it should apply
here too.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:52 +01:00
Jiri Kosina aae6c286da HID: set proper dev.parent in hidraw
We need to properly set parent of the hidraw device (which is the
corresponding physical device itself) in order to hidraw devices not
end up under virtual device tree.

Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:52 +01:00
Jiri Slaby 3a6f82f7a2 HID: add dynids facility
Allow adding new devices to the hid drivers on the fly without
a need of kernel recompilation.

Now, one can test a driver e.g. by:
echo 0003:045E:00F0.0003 > ../generic-usb/unbind
echo 0003 045E 00F0 > new_id
from some driver subdir.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:52 +01:00
Jiri Slaby 898089d08f HID: use GFP_KERNEL in hid_alloc_buffers
We might sleep, so no problem to use GFP_KERNEL.

While at it bring the function to coding style.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:52 +01:00
Jiri Slaby 581a273960 HID: usbhid, use usb_endpoint_xfer_int
Use usb_endpoint_xfer_int() instead of direct use of constants.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:51 +01:00
Jiri Slaby 0ed94b3342 HID: move usbhid flags to usbhid.h
Move usbhid specific flags from global hid.h into local usbhid.h.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:51 +01:00
Rafi Rubin 94011f93f2 HID: add n-trig digitizer support
Added quirks for the N-Trig digitizer.

Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:51 +01:00
Jiri Kosina 9188e79ec3 HID: add phys and name ioctls to hidraw
The hiddev interface provides ioctl() calls which can be used
to obtain phys and raw name of the underlying device.

Add the corresponding support also into hidraw.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:51 +01:00
Kay Sievers 6bbe586fd4 HID: struct device - replace bus_id with dev_name(), dev_set_name()
This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

CC: Jiri Kosina <jkosina@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:51 +01:00
Alan Stern 08ef08ee8c HID: automatically call usbhid_set_leds in usbhid driver
This patch (as1146c) makes usbhid automatically call usbhid_set_leds()
for any device that supports the keyboard boot protocol.

In theory this should be perfectly safe.  BIOSes send the LED output
report as part of their normal device initialization, so any keyboard
device supporting the boot protocol has to be able to handle it.

As a side effect, the hid-dell and hid-bright drivers are no longer
needed, and the Logitech keyboard driver can be removed from hid-lg.

CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:50 +01:00
Jiri Kosina efc7ce18d9 HID: non-input reports can also be numbered
When computing the maximal buffer size needed, we must take into
account that not only input reports can be numbered.

Pointed out in bugzilla #10467

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:50 +01:00
Jiri Kosina ac26fca3e1 HID: ignore mouse interface for unibody macbooks
The mouse interface on unibody macbooks is going to be handled by
bcm59743 driver in 2.6.29.

Reported-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 01:00:50 +01:00
Jan Scholz ee8a1a0a1a HID: Apple ALU wireless keyboards are bluetooth devices
While parsing 'hid_blacklist' in the apple alu wireless keyboard is not found.
This happens because in the blacklist it is declared with HID_USB_DEVICE
although the keyboards are really bluetooth devices.  The same holds for
'apple_devices' list.

This patch fixes it by changing HID_USB_DEVICE to HID_BLUETOOTH_DEVICE in those
two lists.

Signed-off-by: Jan Scholz <Scholz@fias.uni-frankfurt.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-28 15:09:26 +01:00
Jiri Slaby fde5be353e HID: remove setup mutex, fix possible deadlock
It causes recursive locking warning and is unneeded after
introduction of STARTED flag.

* Resume vs. stop is effectively solved by DISCONNECT flag.
* No problem in suspend vs. start -- urb is submitted even after open
  which is possible after connect which is called after start.
* Resume vs. start solved by STARTED flag.
* Suspend vs. stop -- no problem in killing urb and timer twice.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-23 12:03:20 +01:00
Jiri Kosina 578f3a35fe HID: add USB ID for another dual gameron adapter
0x0810/0x0002 needs the very same handling as 0x0001.

Reported-by: Steve Conklin <sconklin@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-20 15:55:38 +01:00
Jiri Kosina 06d2148ed3 HID: unignore mouse on unibody macbooks
In commit a96d6ef34, the mouse interfaces on the unibody macbooks were
put into hid mouse ignore list. This was a little bit too premature
though, as the corresponding bcm5974 changes are scheduled for 2.6.29.

Remove these devices from the ignore list for now, in order to provide at
least basic functionality with the HID driver.

Will be reintroduced in 2.6.29

Reported-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-20 11:22:17 +01:00
Jiri Kosina 5181e59451 HID: fix blacklist entries for greenasia/pantherlord
Fix misplaced quirk entries for devices driven by hid-pl driver. The
devices shouls be only blacklisted by generic HID driver, not completely
ignored.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-17 01:44:38 +01:00
Jiri Slaby 131d3a7a00 HID: don't grab devices with no input
Some devices have no input interrupt endpoint. These won't be handled
by usbhid, but currently they are not refused and reside on hid bus.

Perform this checking earlier so that we refuse to control such
a device early enough (and not pass it to the hid bus at all).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-14 14:10:01 +01:00
Alexey Klimov 62a56582e0 HID: fix radio-mr800 hidquirks
This patch fixes radio-mr800 hidqurks. Removes it from blacklist entry
and places it in ignore entry in hid/hid-core.c

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:36:39 +01:00
Alexey Klimov c91c21c5a6 HID: fix kworld fm700 radio hidquirks
This patch fixes kworld fm700 usb-radio hidqurks that handled by
radio-si470x. Removes it from blacklist entry and places it in ignore
entry in hid/hid-core.c

The bug went in through the V4L/DVB tree by commit 6a13378a without
HID maintainer being involved at all.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:36:11 +01:00
Jiri Slaby e3e14de50d HID: fix start/stop cycle in usbhid driver
`stop' left out usbhid->urb* pointers and so the next `start' thought
it needs to allocate nothing and used the memory pointers previously
pointed to. This led to memory corruption and device malfunction.

Also don't forget to clear disconnect flag on start which was left set
by the previous `stop'.

This fixes

	echo DEVICE > /sys/bus/hid/drivers/DRIVER/unbind
	echo DEVICE > /sys/bus/hid/drivers/DRIVER/bind

failures.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Andi Kleen 43ff3a48c1 HID: use single threaded work queue for hid_compat
Use single threaded work queue for hid_compat

I doubt HID really needs to scale over multiple CPUs. So only use a
single threaded workqueue for HID_COMPAT. This avoids some excessive
thread use on systems with a larger number of CPUs.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Henrik Rydberg 437184ae8b HID: map macbook keys for "Expose" and "Dashboard"
On macbooks there are specific keys for the user-space functions Expose
and Dashboard, which currently has no counterpart in input.h. This patch
adds KEY_SCALE and KEY_DASHBOARD, and maps the keyboard accordingly.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Henrik Rydberg a96d6ef347 HID: support for new unibody macbooks
The unibody MacBook 5 and MacBook Pro 5 come with a new version of
the bcm5974 trackpad. This patch adds the USB device ids and all
the appropriate quirks, including hid_blacklist.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Oliver Neukum 7d672cd750 HID: fix locking in hidraw_open()
As open needs to sleep hidraw was wrong to call it with a spinlock held.
Furthermore, open can of course fail which needs to be handled.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:35 +01:00
Alexey Klimov 6a13378a56 V4L/DVB (9337a): HID: Don't allow KWorld radio fm700 be handled by usb hid drivers
This device is already handled by radio-si470x driver, and we
therefore want usbhid to ignore it.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11 08:09:43 -02:00
Al Viro 233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00