Граф коммитов

7 Коммитов

Автор SHA1 Сообщение Дата
Mark Brown ca23f8c1b0 mfd: Add WM8351 support
The WM8351 is a WM8350 variant. As well as register default changes the
WM8351 has fewer voltage and current regulators than the WM8350.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown 9692063062 mfd: Add WM8352 support
The WM8352 is a variant of the WM8350. Aside from the register defaults
there are no software visible differences to the WM8350.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:42 +01:00
Mark Brown 2c5212279a mfd: Remove i.MX31ism from WM8350 i2c driver
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04 12:17:37 +01:00
Mark Brown 898d8054ec mfd: Correct WM8350 I2C return code usage
The vendor BSP used for the WM8350 development provided an I2C driver
which incorrectly returned zero on succesful sends rather than the
number of transmitted bytes, an error which was then propagated into the
WM8350 I2C accessors.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-11-16 19:58:47 +01:00
Mark Brown ebccec0fa4 mfd: Add WM8350 interrupt support
The WM8350 has an interrupt line to the CPU which is shared by the
devices on the CPU. This patch adds support for the interrupt
controller within the WM8350 which identifies which identifies the
interrupt cause. In common with other similar chips this is done
outside the standard interrupt framework due to the need to access
the interrupt controller over an interrupt-driven bus.

This code was all originally written by Liam Girdwood with updates for
submission by me.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13 21:51:56 +01:00
Mark Brown bcdd4efc1b mfd: Add initialisation callback for WM8350
Some functions of the WM8350 require board-specific initialisation on
startup. Provide a callback to the WM8350 driver in platform data
for platforms to use to configure the chip.  Use of a callback allows
platforms to control the ordering of initialisation which can be
important.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13 21:51:56 +01:00
Mark Brown c661a0b92d mfd: Add I2C control support for WM8350
Implement the I2C control interface for the WM8350. This code was
originally written by Liam Girdwood and has been updated for submission
by Mark Brown.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-13 21:51:55 +01:00